Devicetree
 help / color / mirror / Atom feed
From: Devarsh Thakkar <devarsht@ti.com>
To: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>,
	Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
	Maxime Ripard <mripard@kernel.org>,
	Thomas Zimmermann <tzimmermann@suse.de>,
	David Airlie <airlied@gmail.com>, Simona Vetter <simona@ffwll.ch>,
	Rob Herring <robh@kernel.org>,
	"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>, Lee Jones <lee@kernel.org>,
	Aradhya Bhatia <aradhya.bhatia@linux.dev>,
	Nishanth Menon <nm@ti.com>, Vignesh Raghavendra <vigneshr@ti.com>,
	Swamil Jain <s-jain1@ti.com>,
	Louis Chauvet <louis.chauvet@bootlin.com>
Cc: <devicetree@vger.kernel.org>, <dri-devel@lists.freedesktop.org>,
	<linux-kernel@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>
Subject: Re: [PATCH v3 09/15] drm/tidss: Add external data and sync signal edge configuration
Date: Wed, 8 Jul 2026 12:20:22 +0530	[thread overview]
Message-ID: <2e709e26-742a-4a6a-a76f-31e188fa6332@ti.com> (raw)
In-Reply-To: <20260529-beagley-ai-display-v3-9-7fefdc5d1adf@ideasonboard.com>

On 29/05/26 14:15, Tomi Valkeinen wrote:
> The DPI output pipeline in K3 SoCs contains the display subsystem (DSS)
> which produces the in-SoC parallel video signal, and a DPI block which
> adjusts the signal to the external MIPI DPI output.
> 
> The DSS IP has registers to configure whether the data and sync signals
> are driven on rising or falling clock edge, and on some SoCs these are
> automatically conveyed to the DPI block which needs that configuration
> to properly output the MIPI DPI signal.
> 
> However, on some SoCs the DPI block configuration has to be done
> manually, using an extra register outside the DSS, DPI0_CLK_CTRL from
> MAIN_CTRL_MMR_CFG0 block, which controls the DPI block's behavior.
> 
> Add the support to get the regmap to the register via syscon, and
> configure the bits before enabling the video output.
> 
> Original patch from Louis Chauvet <louis.chauvet@bootlin.com>
> 
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>

Reviewed-by: Devarsh Thakkar <devarsht@ti.com>

Regards
Devarsh

> ---
>   drivers/gpu/drm/tidss/tidss_dispc.c      | 25 +++++++++++++++++++++++++
>   drivers/gpu/drm/tidss/tidss_dispc_regs.h |  4 ++++
>   2 files changed, 29 insertions(+)
> 
> diff --git a/drivers/gpu/drm/tidss/tidss_dispc.c b/drivers/gpu/drm/tidss/tidss_dispc.c
> index c21ac3f51720..08342a9a5e8c 100644
> --- a/drivers/gpu/drm/tidss/tidss_dispc.c
> +++ b/drivers/gpu/drm/tidss/tidss_dispc.c
> @@ -467,6 +467,8 @@ struct dispc_device {
>   	const struct dispc_features *feat;
>   
>   	struct clk *fclk;
> +	struct regmap *syscon_dpi_io_ctrl;
> +	unsigned int syscon_dpi_io_ctrl_offset;
>   
>   	bool is_enabled;
>   
> @@ -1201,6 +1203,13 @@ void dispc_vp_prepare(struct dispc_device *dispc, u32 hw_videoport,
>   				  mode->crtc_hdisplay - 1) |
>   		       FIELD_PREP(DISPC_VP_SIZE_SCREEN_VDISPLAY_MASK,
>   				  mode->crtc_vdisplay - 1));
> +
> +	if (dispc->vp_data[hw_videoport].dpi_output && dispc->syscon_dpi_io_ctrl) {
> +		regmap_write(dispc->syscon_dpi_io_ctrl,
> +			     dispc->syscon_dpi_io_ctrl_offset + 0x0,
> +			     (!ipc ? DPI0_CLK_CTRL_DATA_CLK_INVDIS : 0) |
> +			     (rf ? DPI0_CLK_CTRL_SYNC_CLK_INVDIS : 0));
> +	}
>   }
>   
>   void dispc_vp_enable(struct dispc_device *dispc, u32 hw_videoport)
> @@ -2989,6 +2998,22 @@ int dispc_init(struct tidss_device *tidss)
>   
>   	dispc_init_errata(dispc);
>   
> +	dispc->syscon_dpi_io_ctrl =
> +		syscon_regmap_lookup_by_phandle_args(tidss->dev->of_node,
> +						     "ti,dpi-io-ctrl", 1,
> +						     &dispc->syscon_dpi_io_ctrl_offset);
> +
> +	if (IS_ERR(dispc->syscon_dpi_io_ctrl)) {
> +		r = PTR_ERR(dispc->syscon_dpi_io_ctrl);
> +
> +		if (r == -ENOENT) {
> +			dispc->syscon_dpi_io_ctrl = NULL;
> +		} else {
> +			return dev_err_probe(dispc->dev, r,
> +					     "failed to get 'ti,dpi-io-ctrl'\n");
> +		}
> +	}
> +
>   	dispc->fourccs = devm_kcalloc(dev, ARRAY_SIZE(dispc_color_formats),
>   				      sizeof(*dispc->fourccs), GFP_KERNEL);
>   	if (!dispc->fourccs)
> diff --git a/drivers/gpu/drm/tidss/tidss_dispc_regs.h b/drivers/gpu/drm/tidss/tidss_dispc_regs.h
> index 382027dddce8..4cdde24d8372 100644
> --- a/drivers/gpu/drm/tidss/tidss_dispc_regs.h
> +++ b/drivers/gpu/drm/tidss/tidss_dispc_regs.h
> @@ -333,4 +333,8 @@ enum oldi_mode_reg_val { SPWG_18 = 0, JEIDA_24 = 1, SPWG_24 = 2 };
>   
>   #define AM65X_OLDI_PWRDN_TX		BIT(8)
>   
> +/* Bits in the MAIN_CTRL_MMR_CFG0_DPI0_CLK_CTRL register */
> +#define DPI0_CLK_CTRL_DATA_CLK_INVDIS BIT(8)
> +#define DPI0_CLK_CTRL_SYNC_CLK_INVDIS BIT(9)
> +
>   #endif /* __TIDSS_DISPC_REGS_H */
> 


  reply	other threads:[~2026-07-08  6:50 UTC|newest]

Thread overview: 35+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-05-29  8:45 [PATCH v3 00/15] drm/tidss: Add BeagleY-AI display support (and some more) Tomi Valkeinen
2026-05-29  8:45 ` [PATCH v3 01/15] dt-bindings: display: ti: Move ti,am62l-dss binding to a new binding file Tomi Valkeinen
2026-05-29  8:59   ` sashiko-bot
2026-05-29  8:45 ` [PATCH v3 02/15] dt-bindings: display: ti,am65x-dss: Simplify binding Tomi Valkeinen
2026-05-29  8:45 ` [PATCH v3 03/15] dt-bindings: display: ti,am625-oldi: Add optional power-domain for OLDI Tomi Valkeinen
2026-05-30  8:55   ` Krzysztof Kozlowski
2026-05-29  8:45 ` [PATCH v3 04/15] dt-bindings: display: ti,am65x-dss: Add ti,dpi-io-ctrl Tomi Valkeinen
2026-05-30  8:58   ` Krzysztof Kozlowski
2026-05-29  8:45 ` [PATCH v3 05/15] dt-bindings: display: ti,am65x-dss: Add AM62P DSS Tomi Valkeinen
2026-05-29  8:45 ` [PATCH v3 06/15] drm/tidss: Remove extra pm_runtime_mark_last_busy Tomi Valkeinen
2026-05-29  9:11   ` sashiko-bot
2026-06-24 10:39   ` Swamil Jain
2026-05-29  8:45 ` [PATCH v3 07/15] drm/tidss: oldi: Remove define for unused register OLDI_LB_CTRL Tomi Valkeinen
2026-06-24  9:41   ` Swamil Jain
2026-06-24 10:43   ` Swamil Jain
2026-05-29  8:45 ` [PATCH v3 08/15] drm/tidss: Add mechanism to detect DPI output Tomi Valkeinen
2026-05-29  9:28   ` sashiko-bot
2026-06-24 10:44   ` Swamil Jain
2026-05-29  8:45 ` [PATCH v3 09/15] drm/tidss: Add external data and sync signal edge configuration Tomi Valkeinen
2026-07-08  6:50   ` Devarsh Thakkar [this message]
2026-05-29  8:45 ` [PATCH v3 10/15] drm/tidss: Add support for DPIENABLE bit Tomi Valkeinen
2026-05-29  9:30   ` sashiko-bot
2026-06-24 10:46   ` Swamil Jain
2026-07-08  6:35   ` Devarsh Thakkar
2026-05-29  8:45 ` [PATCH v3 11/15] drm/tidss: oldi: Fix OLDI signal polarities Tomi Valkeinen
2026-05-29  9:37   ` sashiko-bot
2026-06-24 10:47   ` Swamil Jain
2026-05-29  8:45 ` [PATCH v3 12/15] drm/tidss: oldi: Convert OLDI to an aux driver Tomi Valkeinen
2026-05-29 10:01   ` sashiko-bot
2026-06-24 10:49   ` Swamil Jain
2026-05-29  8:45 ` [PATCH v3 13/15] drm/tidss: Add support for AM62P display subsystem Tomi Valkeinen
2026-05-29  8:45 ` [PATCH v3 14/15] arm64: dts: ti: k3-am62p-j722s-common-main: Add support for DSS Tomi Valkeinen
2026-05-29  9:54   ` sashiko-bot
2026-05-29  8:45 ` [PATCH v3 15/15] arm64: dts: ti: beagley-ai: Enable HDMI display and audio Tomi Valkeinen
2026-06-26  9:49 ` [PATCH v3 00/15] drm/tidss: Add BeagleY-AI display support (and some more) Shubham

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=2e709e26-742a-4a6a-a76f-31e188fa6332@ti.com \
    --to=devarsht@ti.com \
    --cc=airlied@gmail.com \
    --cc=aradhya.bhatia@linux.dev \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=krzk+dt@kernel.org \
    --cc=lee@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=louis.chauvet@bootlin.com \
    --cc=maarten.lankhorst@linux.intel.com \
    --cc=mripard@kernel.org \
    --cc=nm@ti.com \
    --cc=robh@kernel.org \
    --cc=s-jain1@ti.com \
    --cc=simona@ffwll.ch \
    --cc=tomi.valkeinen@ideasonboard.com \
    --cc=tzimmermann@suse.de \
    --cc=vigneshr@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox