Re: [PATCH v1 1/2] arm64: dts: qcom: eliza: Add LPASS macro and SoundWire support

[Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>]

On 7/3/26 10:34 AM, Ravi Hothi wrote:
> Add SoC-level LPASS WSA macro, VA macro, SoundWire controller and LPASS
> LPI pin controller nodes. DMIC and WSA SoundWire pinctrl states are
> defined inside the LPASS LPI pin controller node. The hardware is similar
> to the SM8750 platform.
> 
> The WSA macro, VA macro and SoundWire controller are kept disabled so
> board DTS files can selectively enable and configure them.
> 
> Signed-off-by: Ravi Hothi <ravi.hothi@oss.qualcomm.com>
> ---
>  arch/arm64/boot/dts/qcom/eliza.dtsi | 193 ++++++++++++++++++++++++++++
>  1 file changed, 193 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/eliza.dtsi b/arch/arm64/boot/dts/qcom/eliza.dtsi
> index 8dbfd0504598..142f43a1e6a3 100644
> --- a/arch/arm64/boot/dts/qcom/eliza.dtsi
> +++ b/arch/arm64/boot/dts/qcom/eliza.dtsi
> @@ -19,6 +19,7 @@
>  #include <dt-bindings/power/qcom,rpmhpd.h>
>  #include <dt-bindings/soc/qcom,gpr.h>
>  #include <dt-bindings/soc/qcom,rpmh-rsc.h>
> +#include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h>
>  
>  / {
>  	interrupt-parent = <&intc>;
> @@ -2072,6 +2073,198 @@ lpass_lpicx_noc: interconnect@7420000 {
>  			#interconnect-cells = <2>;
>  		};
>  
> +		lpass_wsamacro: codec@6b00000 {
> +			compatible = "qcom,eliza-lpass-wsa-macro",
> +				     "qcom,sm8550-lpass-wsa-macro";
> +			reg = <0x0 0x06b00000 0x0 0x1000>;

Nodes with a unit address must be ordered by it - the diff hunk
above shows you that this one is out-of-order

Konrad