Re: [PATCH v1 1/2] arm64: dts: qcom: eliza: Add LPASS macro and SoundWire support

[Ravi Hothi <ravi.hothi@oss.qualcomm.com>]

On 7/7/2026 2:12 PM, Konrad Dybcio wrote:
> On 7/3/26 10:34 AM, Ravi Hothi wrote:
>> Add SoC-level LPASS WSA macro, VA macro, SoundWire controller and LPASS
>> LPI pin controller nodes. DMIC and WSA SoundWire pinctrl states are
>> defined inside the LPASS LPI pin controller node. The hardware is similar
>> to the SM8750 platform.
>>
>> The WSA macro, VA macro and SoundWire controller are kept disabled so
>> board DTS files can selectively enable and configure them.
>>
>> Signed-off-by: Ravi Hothi <ravi.hothi@oss.qualcomm.com>
>> ---
>>   arch/arm64/boot/dts/qcom/eliza.dtsi | 193 ++++++++++++++++++++++++++++
>>   1 file changed, 193 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/eliza.dtsi b/arch/arm64/boot/dts/qcom/eliza.dtsi
>> index 8dbfd0504598..142f43a1e6a3 100644
>> --- a/arch/arm64/boot/dts/qcom/eliza.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/eliza.dtsi
>> @@ -19,6 +19,7 @@
>>   #include <dt-bindings/power/qcom,rpmhpd.h>
>>   #include <dt-bindings/soc/qcom,gpr.h>
>>   #include <dt-bindings/soc/qcom,rpmh-rsc.h>
>> +#include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h>
>>   
>>   / {
>>   	interrupt-parent = <&intc>;
>> @@ -2072,6 +2073,198 @@ lpass_lpicx_noc: interconnect@7420000 {
>>   			#interconnect-cells = <2>;
>>   		};
>>   
>> +		lpass_wsamacro: codec@6b00000 {
>> +			compatible = "qcom,eliza-lpass-wsa-macro",
>> +				     "qcom,sm8550-lpass-wsa-macro";
>> +			reg = <0x0 0x06b00000 0x0 0x1000>;
> 
> Nodes with a unit address must be ordered by it - the diff hunk
> above shows you that this one is out-of-order

ACK, Will update in next version.

Thanks,
Ravi Hothi

> 
> Konrad