Re: [PATCH v3 4/4] arm64: dts: qcom: add base QCS8300 RIDE board

[Jingyi Wang <quic_jingyw@quicinc.com>]

On 11/29/2024 12:49 AM, Andrew Lunn wrote:
> On Thu, Nov 28, 2024 at 04:44:46PM +0800, Jingyi Wang wrote:
>> Add initial support for Qualcomm QCS8300 RIDE board which enables DSPs,
>> UFS and booting to shell with uart console.
>>
>> Written with help from Tingguo Cheng (added rpmhpd nodes) and Xin Liu
>> (added ufs, adsp and gpdsp nodes).
>>
>> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
>> Signed-off-by: Jingyi Wang <quic_jingyw@quicinc.com>
>> ---
>>  arch/arm64/boot/dts/qcom/Makefile         |   2 +-
>>  arch/arm64/boot/dts/qcom/qcs8300-ride.dts | 267 ++++++++++++++++++++++++++++++
>>  2 files changed, 268 insertions(+), 1 deletion(-)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
>> index 9bb8b191aeb5..d9545743606a 100644
>> --- a/arch/arm64/boot/dts/qcom/Makefile
>> +++ b/arch/arm64/boot/dts/qcom/Makefile
>> @@ -114,7 +114,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= qcm6490-shift-otter.dtb
>>  dtb-$(CONFIG_ARCH_QCOM)	+= qcs404-evb-1000.dtb
>>  dtb-$(CONFIG_ARCH_QCOM)	+= qcs404-evb-4000.dtb
>>  dtb-$(CONFIG_ARCH_QCOM)	+= qcs6490-rb3gen2.dtb
>> -dtb-$(CONFIG_ARCH_QCOM)	+= qcs8550-aim300-aiot.dtb
>> +dtb-$(CONFIG_ARCH_QCOM)	+= qcs8300-ride.dtb
> 
> It would be good to add a comment to the commit message about why you
> are removing qcs8550-aim300-aiot.dtb from the Makefile.
> 
> 	Andrew
sorry it was a typo, will fix that

Thanks,
Jingyi