Re: [PATCH v3 4/4] arm64: dts: qcom: add base QCS8300 RIDE board

[Jingyi Wang <quic_jingyw@quicinc.com>]

On 11/29/2024 1:40 AM, Krzysztof Kozlowski wrote:
> On 28/11/2024 17:49, Andrew Lunn wrote:
>> On Thu, Nov 28, 2024 at 04:44:46PM +0800, Jingyi Wang wrote:
>>> Add initial support for Qualcomm QCS8300 RIDE board which enables DSPs,
>>> UFS and booting to shell with uart console.
>>>
>>> Written with help from Tingguo Cheng (added rpmhpd nodes) and Xin Liu
>>> (added ufs, adsp and gpdsp nodes).
>>>
>>> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
>>> Signed-off-by: Jingyi Wang <quic_jingyw@quicinc.com>
>>> ---
>>>  arch/arm64/boot/dts/qcom/Makefile         |   2 +-
>>>  arch/arm64/boot/dts/qcom/qcs8300-ride.dts | 267 ++++++++++++++++++++++++++++++
>>>  2 files changed, 268 insertions(+), 1 deletion(-)
>>>
>>> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
>>> index 9bb8b191aeb5..d9545743606a 100644
>>> --- a/arch/arm64/boot/dts/qcom/Makefile
>>> +++ b/arch/arm64/boot/dts/qcom/Makefile
>>> @@ -114,7 +114,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= qcm6490-shift-otter.dtb
>>>  dtb-$(CONFIG_ARCH_QCOM)	+= qcs404-evb-1000.dtb
>>>  dtb-$(CONFIG_ARCH_QCOM)	+= qcs404-evb-4000.dtb
>>>  dtb-$(CONFIG_ARCH_QCOM)	+= qcs6490-rb3gen2.dtb
>>> -dtb-$(CONFIG_ARCH_QCOM)	+= qcs8550-aim300-aiot.dtb
>>> +dtb-$(CONFIG_ARCH_QCOM)	+= qcs8300-ride.dtb
>>
>> It would be good to add a comment to the commit message about why you
>> are removing qcs8550-aim300-aiot.dtb from the Makefile.
> 
> Especially that it was not in v2 (which I reviewed) and nothing in the
> changelog explains this removal.
> 
sorry it was a typo, will fix that
> Best regards,
> Krzysztof