Re: [PATCH 2/2] iio: adc: Add TI ADS1220 driver

[David Lechner <dlechner@baylibre.com>]

On 6/10/26 10:13 AM, Nguyen Minh Tien wrote:
> Add an IIO driver for the Texas Instruments ADS1220 24-bit delta-sigma
> SPI ADC. The driver supports single-ended and differential voltage
> channels described as device-tree child nodes, per-channel programmable
> gain (exposed through scale) and data rate (exposed through sampling
> frequency), the internal 2.048V reference, an external reference via a
> regulator, or the analog supply (AVDD) as a ratiometric reference,
> single-shot conversions and a DRDY-interrupt-driven triggered buffer.
> Conversions are gated either on the DRDY interrupt or, when no interrupt
> is wired, on a data-rate-derived delay. Runtime PM powers the device down
> between conversions.

As I mentioned in the DT binding review, I have a driver for ADS122C14
that I should be able to send to the mailing list next week. ADS1220
looks like a simpler version of that but shares many of the same features.

So I would suggest to check that out when I send it and see if we can
share the driver.