Re: [PATCH v1] arm64: dts: monac-arduino-monza: Add Bluetooth UART node

[Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>]

On 4/28/26 4:56 AM, Shuai Zhang wrote:
> enable bt on monac-arduino-monza
> 
> Signed-off-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
> Signed-off-by: Shuai Zhang <shuai.zhang@oss.qualcomm.com>

This sign-off chain is invalid as-is - should this patch have
"From: Loic"? Who is the author?

> ---
>  arch/arm64/boot/dts/qcom/monaco-arduino-monza.dts | 11 +++++++++++
>  1 file changed, 11 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/monaco-arduino-monza.dts b/arch/arm64/boot/dts/qcom/monaco-arduino-monza.dts
> index ca14f0ea4..092ca0b59 100644
> --- a/arch/arm64/boot/dts/qcom/monaco-arduino-monza.dts
> +++ b/arch/arm64/boot/dts/qcom/monaco-arduino-monza.dts
> @@ -21,6 +21,7 @@ aliases {
>  		ethernet0 = &ethernet0;
>  		i2c1 = &i2c1;
>  		serial0 = &uart7;
> +		serial1 = &uart10;
>  	};
>  
>  	chosen {
> @@ -454,6 +455,16 @@ &uart7 {
>  	status = "okay";
>  };
>  
> +&uart10 {
> +	status = "okay";
> +	bluetooth: bluetooth {

Please keep a \n above the subnode definition

> +		compatible = "qcom,qca2066-bt";
> +		max-speed = <3200000>;
> +		enable-gpios = <&tlmm 55 GPIO_ACTIVE_HIGH>;
> +		status = "okay";

The node is enabled already, because nothing disabled it. Drop the
status line.

Konrad