[PATCH] ARM: dts: imx6dl-phytec-mira: Add phyBOARD-Mira-i.MX6DL with eMMC

[PATCH] ARM: dts: imx6dl-phytec-mira: Add phyBOARD-Mira-i.MX6DL with eMMC

[Primoz Fiser]

Add device-tree for PHYTEC phyBOARD-Mira-i.MX6 DL board with eMMC. The
variant with NAND storage is already present in-tree. Now let's add the
eMMC variant for which the compatible string "imx6dl-pbac06-emmc"
already exists too but was not used until now.

Signed-off-by: Primoz Fiser <primoz.fiser@norik.com>
---
 arch/arm/boot/dts/nxp/imx/Makefile            |  1 +
 .../nxp/imx/imx6dl-phytec-mira-rdk-emmc.dts   | 75 +++++++++++++++++++
 2 files changed, 76 insertions(+)
 create mode 100644 arch/arm/boot/dts/nxp/imx/imx6dl-phytec-mira-rdk-emmc.dts

diff --git a/arch/arm/boot/dts/nxp/imx/Makefile b/arch/arm/boot/dts/nxp/imx/Makefile
index c5caca92ea10..4361708f70e3 100644
--- a/arch/arm/boot/dts/nxp/imx/Makefile
+++ b/arch/arm/boot/dts/nxp/imx/Makefile
@@ -136,6 +136,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
 	imx6dl-mba6b.dtb \
 	imx6dl-nit6xlite.dtb \
 	imx6dl-nitrogen6x.dtb \
+	imx6dl-phytec-mira-rdk-emmc.dtb \
 	imx6dl-phytec-mira-rdk-nand.dtb \
 	imx6dl-phytec-pbab01.dtb \
 	imx6dl-pico-dwarf.dtb \
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-phytec-mira-rdk-emmc.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-phytec-mira-rdk-emmc.dts
new file mode 100644
index 000000000000..aa3239660bca
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-phytec-mira-rdk-emmc.dts
@@ -0,0 +1,75 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2018 PHYTEC Messtechnik GmbH
+ * Author: Christian Hemp <c.hemp@phytec.de>
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6dl-phytec-phycore-som.dtsi"
+#include "imx6qdl-phytec-mira.dtsi"
+#include "imx6qdl-phytec-mira-peb-eval-01.dtsi"
+#include "imx6qdl-phytec-mira-peb-av-02.dtsi"
+#include "imx6qdl-phytec-mira-peb-wlbt-05.dtsi"
+
+/ {
+	model = "PHYTEC phyBOARD-Mira DualLite/Solo Carrier-Board with eMMC";
+	compatible = "phytec,imx6dl-pbac06-emmc", "phytec,imx6dl-pbac06",
+		     "phytec,imx6qdl-pcm058", "fsl,imx6dl";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+};
+
+&can1 {
+	status = "okay";
+};
+
+&fec {
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c_rtc {
+	status = "okay";
+};
+
+&m25p80 {
+	status = "okay";
+};
+
+&pcie {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbotg {
+	status = "okay";
+};
+
+&usdhc1 {
+	status = "okay";
+};
+
+&usdhc4 {
+	status = "okay";
+};
-- 
2.34.1

Re: [PATCH] ARM: dts: imx6dl-phytec-mira: Add phyBOARD-Mira-i.MX6DL with eMMC

[sashiko-bot]

Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
- [Low] arm: dts: build failure due to non-existent .dtsi inclusion
--

commit d27346cce6650da77827531e0a8db928754f5352
Author: Primoz Fiser <primoz.fiser@norik.com>

ARM: dts: imx6dl-phytec-mira: Add phyBOARD-Mira-i.MX6DL with eMMC

Add device-tree for PHYTEC phyBOARD-Mira-i.MX6 DL board with eMMC. The
variant with NAND storage is already present in-tree. Now let's add the
eMMC variant for which the compatible string "imx6dl-pbac06-emmc"
already exists too but was not used until now.

> diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-phytec-mira-rdk-emmc.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-phytec-mira-rdk-emmc.dts
> new file mode 100644
> index 0000000000000..aa3239660bca7
> --- /dev/null
> +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-phytec-mira-rdk-emmc.dts
> @@ -0,0 +1,75 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (C) 2018 PHYTEC Messtechnik GmbH
> + * Author: Christian Hemp <c.hemp@phytec.de>
> + */
> +
> +/dts-v1/;
> +#include "imx6dl.dtsi"
> +#include "imx6dl-phytec-phycore-som.dtsi"

[Severity: Low]
Could there be a typo in this include filename? The file
"imx6dl-phytec-phycore-som.dtsi" doesn't exist in the tree, which results in
a fatal error during device tree compilation when the C preprocessor fails
to find it.

Should this include "imx6qdl-phytec-phycore-som.dtsi" instead, which does
exist and is used by similar variants?

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20260928123612.2250601-1-primoz.fiser@norik.com?part=1

Re: [PATCH] ARM: dts: imx6dl-phytec-mira: Add phyBOARD-Mira-i.MX6DL with eMMC

[Primoz Fiser]

On 9/28/26 14:44, sashiko-bot@kernel.org wrote:
> Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
> - [Low] arm: dts: build failure due to non-existent .dtsi inclusion
> --
> 
> commit d27346cce6650da77827531e0a8db928754f5352
> Author: Primoz Fiser <primoz.fiser@norik.com>
> 
> ARM: dts: imx6dl-phytec-mira: Add phyBOARD-Mira-i.MX6DL with eMMC
> 
> Add device-tree for PHYTEC phyBOARD-Mira-i.MX6 DL board with eMMC. The
> variant with NAND storage is already present in-tree. Now let's add the
> eMMC variant for which the compatible string "imx6dl-pbac06-emmc"
> already exists too but was not used until now.
> 
>> diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-phytec-mira-rdk-emmc.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-phytec-mira-rdk-emmc.dts
>> new file mode 100644
>> index 0000000000000..aa3239660bca7
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-phytec-mira-rdk-emmc.dts
>> @@ -0,0 +1,75 @@
>> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
>> +/*
>> + * Copyright (C) 2018 PHYTEC Messtechnik GmbH
>> + * Author: Christian Hemp <c.hemp@phytec.de>
>> + */
>> +
>> +/dts-v1/;
>> +#include "imx6dl.dtsi"
>> +#include "imx6dl-phytec-phycore-som.dtsi"
> 
> [Severity: Low]
> Could there be a typo in this include filename? The file
> "imx6dl-phytec-phycore-som.dtsi" doesn't exist in the tree, which results in
> a fatal error during device tree compilation when the C preprocessor fails
> to find it.
> 
> Should this include "imx6qdl-phytec-phycore-som.dtsi" instead, which does
> exist and is used by similar variants?

True.

This patch depends on series [1].

Sorry for confusion.

BR,
Primoz


[1]
https://lore.kernel.org/all/20260923070505.494949-1-primoz.fiser@norik.com/



> 

-- 
Primoz Fiser
phone: +386-41-390-545
email: primoz.fiser@norik.com
--
Norik systems d.o.o.
Your embedded software partner
Slovenia, EU
phone: +386-41-540-545
email: info@norik.com

Re: [PATCH] ARM: dts: imx6dl-phytec-mira: Add phyBOARD-Mira-i.MX6DL with eMMC

[Frank.Li]

From: Frank Li <Frank.Li@nxp.com>


On Mon, 28 Sep 2026 14:36:12 +0200, Primoz Fiser wrote:
> Add device-tree for PHYTEC phyBOARD-Mira-i.MX6 DL board with eMMC. The
> variant with NAND storage is already present in-tree. Now let's add the
> eMMC variant for which the compatible string "imx6dl-pbac06-emmc"
> already exists too but was not used until now.

Applied, thanks!

[1/1] ARM: dts: imx6dl-phytec-mira: Add phyBOARD-Mira-i.MX6DL with eMMC
      commit: ec7b37c768d34107d06bd629d05cde0e2218ee9a

Best regards,
-- 
Frank Li <Frank.Li@nxp.com>