Re: [PATCH v6 7/8] arm64: dts: qcom: mahua: Add QREF regulator supplies to TCSR

[Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>]

On 6/22/26 3:31 PM, Qiang Yu wrote:
> On Mon, Jun 22, 2026 at 02:18:54PM +0200, Konrad Dybcio wrote:
>> On 6/22/26 7:11 AM, Qiang Yu wrote:
>>> Mahua has a different PCIe QREF topology from glymur. Override the TCSR
>>> compatible to qcom,mahua-tcsr in mahua.dtsi, and wire up the required
>>> LDO supplies for the PCIe clkref paths on the CRD board.
>>>
>>> Signed-off-by: Qiang Yu <qiang.yu@oss.qualcomm.com>
>>> ---
>>>  arch/arm64/boot/dts/qcom/mahua-crd.dts | 15 +++++++++++++++
>>>  arch/arm64/boot/dts/qcom/mahua.dtsi    |  4 ++++
>>>  2 files changed, 19 insertions(+)
>>>
>>> diff --git a/arch/arm64/boot/dts/qcom/mahua-crd.dts b/arch/arm64/boot/dts/qcom/mahua-crd.dts
>>> index 9c8244e892dd..8b42f5174b31 100644
>>> --- a/arch/arm64/boot/dts/qcom/mahua-crd.dts
>>> +++ b/arch/arm64/boot/dts/qcom/mahua-crd.dts
>>> @@ -19,3 +19,18 @@ / {
>>>  	model = "Qualcomm Technologies, Inc. Mahua CRD";
>>>  	compatible = "qcom,mahua-crd", "qcom,mahua";
>>>  };
>>> +
>>> +&tcsr {
>>> +	vdda-qrefrpt0-0p9-supply = <&vreg_l2f_e1_0p83>;
>>> +	vdda-qrefrpt1-0p9-supply = <&vreg_l2f_e1_0p83>;
>>> +	vdda-qrefrpt2-0p9-supply = <&vreg_l2f_e1_0p83>;
>>> +	vdda-qrefrpt3-0p9-supply = <&vreg_l1f_e1_0p82>;
>>> +	vdda-qrefrpt4-0p9-supply = <&vreg_l2h_e0_0p72>;
>>> +	vdda-qrefrpt5-0p9-supply = <&vreg_l2h_e0_0p72>;
>>> +	vdda-qrefrx1-0p9-supply = <&vreg_l2f_e1_0p83>;
>>> +	vdda-qrefrx2-0p9-supply = <&vreg_l2f_e1_0p83>;
>>> +	vdda-qrefrx3-0p9-supply = <&vreg_l2h_e0_0p72>;
>>> +	vdda-qreftx1-0p9-supply = <&vreg_l1f_e1_0p82>;
>>> +	vdda-refgen3-0p9-supply = <&vreg_l1f_e1_0p82>;
>>> +	vdda-refgen3-1p2-supply = <&vreg_l4f_e1_1p08>;
>>
>> The supplies are correct, but QREF uses refgen4 on Mahua
>>
> 
> The instance is REFGEN4, but its regulator name is refgen3_xxx. Do you
> think rename the supplies as vdda-refgen4-0p9-supply is better?

Ah, I overlooked this. Maybe 4 could be better here, since the supplies
that end up being assigned there match what we call refgen4 on Glymur.

But there's no good answer, both options are terrible. Let's add a
comment somewhere (in bindings?) describing this mess, perhaps like:

# On Mahua, the REFGEN4 block is supplied through pads named REFGEN3

Konrad