Devicetree
 help / color / mirror / Atom feed
From: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
To: Yijie Yang <yijie.yang@oss.qualcomm.com>,
	Bjorn Andersson <andersson@kernel.org>,
	Konrad Dybcio <konradybcio@kernel.org>,
	Abel Vesa <abelvesa@kernel.org>, Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>
Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org
Subject: Re: [PATCH 1/2] arm64: dts: qcom: maili-mtp: Add WCN7850 WLAN support
Date: Thu, 19 Nov 2026 13:42:33 +0800	[thread overview]
Message-ID: <93bbc219-5706-4e3f-87c1-ddeeb8f11df4@oss.qualcomm.com> (raw)
In-Reply-To: <20261118-wlan-bt-v1-1-18bb1b059a17@oss.qualcomm.com>



On 11/18/2026 11:33 AM, Yijie Yang wrote:
> Enable WCN785x Wi-Fi on Maili MTP board.
> 
> Signed-off-by: Yijie Yang <yijie.yang@oss.qualcomm.com>
> ---
>   arch/arm64/boot/dts/qcom/maili-mtp.dts | 88 ++++++++++++++++++++++++++++++++++
>   1 file changed, 88 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/maili-mtp.dts b/arch/arm64/boot/dts/qcom/maili-mtp.dts
> index 5409d0a7ec2e0..a3c2016eb9053 100644
> --- a/arch/arm64/boot/dts/qcom/maili-mtp.dts
> +++ b/arch/arm64/boot/dts/qcom/maili-mtp.dts
> @@ -142,6 +142,63 @@ sdcard_vdd_3p0: sdcard-vdd-3p0 {
>   
>   		vin-supply = <&vreg_bob1>;
>   	};
> +
> +	wcn7850-pmu {
> +		compatible = "qcom,wcn7850-pmu";
> +
> +		pinctrl-0 = <&wlan_en>, <&sw_ctrl_default>;
> +		pinctrl-names = "default";
> +
> +		wlan-enable-gpios = <&pmh0104_c_e0_gpios 7 GPIO_ACTIVE_HIGH>;
> +
> +		vdd-supply = <&vreg_s1j_0p8>;
> +		vddio-supply = <&vreg_l2d_1p8>;
> +		vddio1p2-supply = <&vreg_l4g_1p2>;
> +		vddaon-supply = <&vreg_s9d_1p0>;
> +		vdddig-supply = <&vreg_s3c_1p2>;
> +		vddrfa1p2-supply = <&vreg_s9d_1p0>;
> +		vddrfa1p8-supply = <&vreg_s7g_1p2>;
> +
> +		clocks = <&rpmhcc RPMH_RF_CLK1>;
> +
> +		regulators {
> +			vreg_pmu_rfa_cmn: ldo0 {
> +				regulator-name = "vreg_pmu_rfa_cmn";
> +			};
> +
> +			vreg_pmu_aon_0p59: ldo1 {
> +				regulator-name = "vreg_pmu_aon_0p59";
> +			};
> +
> +			vreg_pmu_wlcx_0p8: ldo2 {
> +				regulator-name = "vreg_pmu_wlcx_0p8";
> +			};
> +
> +			vreg_pmu_wlmx_0p85: ldo3 {
> +				regulator-name = "vreg_pmu_wlmx_0p85";
> +			};
> +
> +			vreg_pmu_rfa_0p8: ldo5 {
> +				regulator-name = "vreg_pmu_rfa_0p8";
> +			};
> +
> +			vreg_pmu_rfa_1p2: ldo6 {
> +				regulator-name = "vreg_pmu_rfa_1p2";
> +			};
> +
> +			vreg_pmu_rfa_1p8: ldo7 {
> +				regulator-name = "vreg_pmu_rfa_1p8";
> +			};
> +
> +			vreg_pmu_pcie_0p9: ldo8 {
> +				regulator-name = "vreg_pmu_pcie_0p9";
> +			};
> +
> +			vreg_pmu_pcie_1p8: ldo9 {
> +				regulator-name = "vreg_pmu_pcie_1p8";
> +			};
> +		};
> +	};
>   };
>   
>   &apps_rsc {
> @@ -757,6 +814,21 @@ &pcie0_phy {
>   &pcie_port0 {
>   	wake-gpios = <&tlmm 104 GPIO_ACTIVE_LOW>;
>   	reset-gpios = <&tlmm 102 GPIO_ACTIVE_LOW>;
> +
> +	wifi@0 {
> +		compatible = "pci17cb,1107";
> +		reg = <0x10000 0x0 0x0 0x0 0x0>;
> +
> +		vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
> +		vddaon-supply = <&vreg_pmu_aon_0p59>;
> +		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
> +		vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
> +		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
> +		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
> +		vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
> +		vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>;
> +		vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>;
> +	};
>   };
>   
>   &pcie1 {
> @@ -800,6 +872,16 @@ led-1 {
>   };
>   
>   &pmh0104_c_e0_gpios {
> +	wlan_en: wlan-en-state {
> +		pins = "gpio7";
> +		function = "normal";
> +		input-disable;
> +		output-enable;
> +		output-low;
> +		bias-disable;
> +		power-source = <1>;
> +	};
> +

s < w

Thanks,
Jingyi

>   	sd_card_eldo_en: sd-card-eldo-en-state {
>   		pins = "gpio5";
>   		function = "normal";
> @@ -906,6 +988,12 @@ &tlmm {
>   			       <119 2>,	/* SoCCP */
>   			       <144 2>,	/* CXM UART */
>   			       <211 1>; /* NFC Secure IO */
> +
> +	sw_ctrl_default: sw-ctrl-default-state {
> +		pins = "gpio18";
> +		function = "gpio";
> +		bias-pull-down;
> +	};
>   };
>   
>   &uart7 {
> 


  parent reply	other threads:[~2026-11-19  5:42 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-11-18  3:33 [PATCH 0/2] arm64: dts: qcom: Enable WCN7850 on Maili MTP Yijie Yang
2026-11-18  3:33 ` [PATCH 1/2] arm64: dts: qcom: maili-mtp: Add WCN7850 WLAN support Yijie Yang
2026-11-18  3:53   ` sashiko-bot
2026-11-18  7:47     ` Yijie Yang
2026-11-19  5:42   ` Jingyi Wang [this message]
2026-11-19  5:58     ` Yijie Yang
2026-11-18  3:33 ` [PATCH 2/2] arm64: dts: qcom: maili-mtp: Add WCN7850 Bluetooth support Yijie Yang
2026-11-19  5:43   ` Jingyi Wang
2026-11-19  6:01     ` Yijie Yang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=93bbc219-5706-4e3f-87c1-ddeeb8f11df4@oss.qualcomm.com \
    --to=jingyi.wang@oss.qualcomm.com \
    --cc=abelvesa@kernel.org \
    --cc=andersson@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=konradybcio@kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=robh@kernel.org \
    --cc=yijie.yang@oss.qualcomm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox