Devicetree
 help / color / mirror / Atom feed
From: Yijie Yang <yijie.yang@oss.qualcomm.com>
To: Jingyi Wang <jingyi.wang@oss.qualcomm.com>,
	Bjorn Andersson <andersson@kernel.org>,
	Konrad Dybcio <konradybcio@kernel.org>,
	Abel Vesa <abelvesa@kernel.org>, Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>
Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org
Subject: Re: [PATCH 2/2] arm64: dts: qcom: maili-mtp: Add WCN7850 Bluetooth support
Date: Thu, 19 Nov 2026 14:01:15 +0800	[thread overview]
Message-ID: <e55aef9f-daad-4ca8-adea-27edb4d2f991@oss.qualcomm.com> (raw)
In-Reply-To: <9d2bdf05-cfa8-4493-aff3-2d424aaebe77@oss.qualcomm.com>



On 11/19/2026 1:43 PM, Jingyi Wang wrote:
> 
> 
> On 11/18/2026 11:33 AM, Yijie Yang wrote:
>> Enable WCN785x Bluetooth on Maili MTP board.
>>
>> Signed-off-by: Yijie Yang <yijie.yang@oss.qualcomm.com>
>> ---
>>   arch/arm64/boot/dts/qcom/maili-mtp.dts | 35 ++++++++++++++++++++++++ 
>> +++++++++-
>>   1 file changed, 34 insertions(+), 1 deletion(-)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/maili-mtp.dts b/arch/arm64/boot/ 
>> dts/qcom/maili-mtp.dts
>> index a3c2016eb9053..49fccc43c9828 100644
>> --- a/arch/arm64/boot/dts/qcom/maili-mtp.dts
>> +++ b/arch/arm64/boot/dts/qcom/maili-mtp.dts
>> @@ -146,9 +146,10 @@ sdcard_vdd_3p0: sdcard-vdd-3p0 {
>>       wcn7850-pmu {
>>           compatible = "qcom,wcn7850-pmu";
>> -        pinctrl-0 = <&wlan_en>, <&sw_ctrl_default>;
>> +        pinctrl-0 = <&bt_default>, <&wlan_en>, <&sw_ctrl_default>;
>>           pinctrl-names = "default";
>> +        bt-enable-gpios = <&pmh0104_c_e0_gpios 6 GPIO_ACTIVE_HIGH>;
>>           wlan-enable-gpios = <&pmh0104_c_e0_gpios 7 GPIO_ACTIVE_HIGH>;
>>           vdd-supply = <&vreg_s1j_0p8>;
>> @@ -178,6 +179,10 @@ vreg_pmu_wlmx_0p85: ldo3 {
>>                   regulator-name = "vreg_pmu_wlmx_0p85";
>>               };
>> +            vreg_pmu_btcmx_0p85: ldo4 {
>> +                regulator-name = "vreg_pmu_btcmx_0p85";
>> +            };
>> +
>>               vreg_pmu_rfa_0p8: ldo5 {
>>                   regulator-name = "vreg_pmu_rfa_0p8";
>>               };
>> @@ -872,6 +877,16 @@ led-1 {
>>   };
>>   &pmh0104_c_e0_gpios {
>> +    bt_default: bt-default-state {
>> +        pins = "gpio6";
>> +        function = "normal";
>> +        input-disable;
>> +        output-enable;
>> +        output-low;
>> +        bias-disable;
>> +        power-source = <1>;
>> +    };
>> +
>>       wlan_en: wlan-en-state {
>>           pins = "gpio7";
>>           function = "normal";
>> @@ -996,6 +1011,24 @@ sw_ctrl_default: sw-ctrl-default-state {
>>       };
>>   };
>> +&uart18 {
>> +    status = "okay";
>> +
>> +    bluetooth {
>> +        compatible = "qcom,wcn7850-bt";
>> +
>> +        vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
>> +        vddaon-supply = <&vreg_pmu_aon_0p59>;
>> +        vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
>> +        vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
>> +        vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
>> +        vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
>> +        vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
>> +
>> +        max-speed = <3200000>;
>> +    };
>> +};
>> +
> 
> uart7 < uart18

In strict alphabetical order, uart18 should come before uart7.

> 
> Thanks,
> Jingyi
> 
>>   &uart7 {
>>       status = "okay";
>>   };
>>
> 

-- 
Best Regards,
Yijie


      reply	other threads:[~2026-11-19  6:01 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-11-18  3:33 [PATCH 0/2] arm64: dts: qcom: Enable WCN7850 on Maili MTP Yijie Yang
2026-11-18  3:33 ` [PATCH 1/2] arm64: dts: qcom: maili-mtp: Add WCN7850 WLAN support Yijie Yang
2026-11-18  3:53   ` sashiko-bot
2026-11-18  7:47     ` Yijie Yang
2026-11-19  5:42   ` Jingyi Wang
2026-11-19  5:58     ` Yijie Yang
2026-11-18  3:33 ` [PATCH 2/2] arm64: dts: qcom: maili-mtp: Add WCN7850 Bluetooth support Yijie Yang
2026-11-19  5:43   ` Jingyi Wang
2026-11-19  6:01     ` Yijie Yang [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=e55aef9f-daad-4ca8-adea-27edb4d2f991@oss.qualcomm.com \
    --to=yijie.yang@oss.qualcomm.com \
    --cc=abelvesa@kernel.org \
    --cc=andersson@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=jingyi.wang@oss.qualcomm.com \
    --cc=konradybcio@kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=robh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox