Devicetree
 help / color / mirror / Atom feed
From: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
To: Yijie Yang <yijie.yang@oss.qualcomm.com>,
	Bjorn Andersson <andersson@kernel.org>,
	Konrad Dybcio <konradybcio@kernel.org>,
	Abel Vesa <abelvesa@kernel.org>, Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>
Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org
Subject: Re: [PATCH 2/2] arm64: dts: qcom: maili-mtp: Add WCN7850 Bluetooth support
Date: Thu, 19 Nov 2026 13:43:23 +0800	[thread overview]
Message-ID: <9d2bdf05-cfa8-4493-aff3-2d424aaebe77@oss.qualcomm.com> (raw)
In-Reply-To: <20261118-wlan-bt-v1-2-18bb1b059a17@oss.qualcomm.com>



On 11/18/2026 11:33 AM, Yijie Yang wrote:
> Enable WCN785x Bluetooth on Maili MTP board.
> 
> Signed-off-by: Yijie Yang <yijie.yang@oss.qualcomm.com>
> ---
>   arch/arm64/boot/dts/qcom/maili-mtp.dts | 35 +++++++++++++++++++++++++++++++++-
>   1 file changed, 34 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/maili-mtp.dts b/arch/arm64/boot/dts/qcom/maili-mtp.dts
> index a3c2016eb9053..49fccc43c9828 100644
> --- a/arch/arm64/boot/dts/qcom/maili-mtp.dts
> +++ b/arch/arm64/boot/dts/qcom/maili-mtp.dts
> @@ -146,9 +146,10 @@ sdcard_vdd_3p0: sdcard-vdd-3p0 {
>   	wcn7850-pmu {
>   		compatible = "qcom,wcn7850-pmu";
>   
> -		pinctrl-0 = <&wlan_en>, <&sw_ctrl_default>;
> +		pinctrl-0 = <&bt_default>, <&wlan_en>, <&sw_ctrl_default>;
>   		pinctrl-names = "default";
>   
> +		bt-enable-gpios = <&pmh0104_c_e0_gpios 6 GPIO_ACTIVE_HIGH>;
>   		wlan-enable-gpios = <&pmh0104_c_e0_gpios 7 GPIO_ACTIVE_HIGH>;
>   
>   		vdd-supply = <&vreg_s1j_0p8>;
> @@ -178,6 +179,10 @@ vreg_pmu_wlmx_0p85: ldo3 {
>   				regulator-name = "vreg_pmu_wlmx_0p85";
>   			};
>   
> +			vreg_pmu_btcmx_0p85: ldo4 {
> +				regulator-name = "vreg_pmu_btcmx_0p85";
> +			};
> +
>   			vreg_pmu_rfa_0p8: ldo5 {
>   				regulator-name = "vreg_pmu_rfa_0p8";
>   			};
> @@ -872,6 +877,16 @@ led-1 {
>   };
>   
>   &pmh0104_c_e0_gpios {
> +	bt_default: bt-default-state {
> +		pins = "gpio6";
> +		function = "normal";
> +		input-disable;
> +		output-enable;
> +		output-low;
> +		bias-disable;
> +		power-source = <1>;
> +	};
> +
>   	wlan_en: wlan-en-state {
>   		pins = "gpio7";
>   		function = "normal";
> @@ -996,6 +1011,24 @@ sw_ctrl_default: sw-ctrl-default-state {
>   	};
>   };
>   
> +&uart18 {
> +	status = "okay";
> +
> +	bluetooth {
> +		compatible = "qcom,wcn7850-bt";
> +
> +		vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
> +		vddaon-supply = <&vreg_pmu_aon_0p59>;
> +		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
> +		vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
> +		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
> +		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
> +		vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
> +
> +		max-speed = <3200000>;
> +	};
> +};
> +

uart7 < uart18

Thanks,
Jingyi

>   &uart7 {
>   	status = "okay";
>   };
> 


  reply	other threads:[~2026-11-19  5:43 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-11-18  3:33 [PATCH 0/2] arm64: dts: qcom: Enable WCN7850 on Maili MTP Yijie Yang
2026-11-18  3:33 ` [PATCH 1/2] arm64: dts: qcom: maili-mtp: Add WCN7850 WLAN support Yijie Yang
2026-11-18  3:53   ` sashiko-bot
2026-11-18  7:47     ` Yijie Yang
2026-11-19  5:42   ` Jingyi Wang
2026-11-19  5:58     ` Yijie Yang
2026-11-18  3:33 ` [PATCH 2/2] arm64: dts: qcom: maili-mtp: Add WCN7850 Bluetooth support Yijie Yang
2026-11-19  5:43   ` Jingyi Wang [this message]
2026-11-19  6:01     ` Yijie Yang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=9d2bdf05-cfa8-4493-aff3-2d424aaebe77@oss.qualcomm.com \
    --to=jingyi.wang@oss.qualcomm.com \
    --cc=abelvesa@kernel.org \
    --cc=andersson@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=konradybcio@kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=robh@kernel.org \
    --cc=yijie.yang@oss.qualcomm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox