[PATCH v5 0/5] Fix some issues in QCOM UFS bindings

[PATCH v5 0/5] Fix some issues in QCOM UFS bindings

[Luca Weiss]

This series aims to solve the dtbs_check errors from the qcom ufs
bindings. It has changed in scope a bit since v1, so it may be a bit all
over the place.

Please note, that I have not tested the sm8450.dtsi patch since I don't
have any hardware there. Testing would be appreciated.

Dt validation will fail without patch 1/5 from [0] so this depends on
that patch at least for the check.

[0] https://lore.kernel.org/linux-arm-msm/20230623113009.2512206-2-abel.vesa@linaro.org/

Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
---
Changes in v5:
- Convert sm8450.dtsi to use qcom,ice property, so stop modifying schema
  for sm8450 and only add qcom,ice property.
- Move reg-names names to top-level with only minItems/maxItems in the
  'if'
- Link to v4: https://lore.kernel.org/r/20221209-dt-binding-ufs-v4-0-14ced60f3d1b@fairphone.com

Changes in v4:
- Pick up tags
- Rebase on linux-next (again)
- Link to v3: https://lore.kernel.org/r/20221209-dt-binding-ufs-v3-0-499dff23a03c@fairphone.com

Changes in v3:
- Drop applied patch
- Pick up sm6115 patch from v5 https://lore.kernel.org/all/20221030094258.486428-2-iskren.chernev@gmail.com/
- Rebase on linux-next
- Link to v2: https://lore.kernel.org/r/20221209-dt-binding-ufs-v2-0-dc7a04699579@fairphone.com

Changes in v2:
- Add new patch adding reg-names to sm6115 & rebase series on top of sm6115
  addition
- Fix binding example after sm8450 move, split this patch from original patch
  since it became too big
- Move reg-names definition to top-level
- Link to v1: https://lore.kernel.org/r/20221209-dt-binding-ufs-v1-0-8d502f0e18d5@fairphone.com

---
Iskren Chernev (1):
      dt-bindings: ufs: qcom: Add sm6115 binding

Luca Weiss (4):
      dt-bindings: ufs: qcom: Add reg-names property for ICE
      dt-bindings: ufs: qcom: Add ICE to sm8450 example
      dt-bindings: crypto: ice: Document sm8450 inline crypto engine
      arm64: dts: qcom: sm8450: Use standalone ICE node for UFS

 .../bindings/crypto/qcom,inline-crypto-engine.yaml |  1 +
 .../devicetree/bindings/ufs/qcom,ufs.yaml          | 44 ++++++++++++++++++++++
 arch/arm64/boot/dts/qcom/sm8450.dtsi               | 22 ++++++-----
 3 files changed, 58 insertions(+), 9 deletions(-)
---
base-commit: 13fb735ae68e5ac065b9867e2fd1d775c337ea15
change-id: 20221209-dt-binding-ufs-2d7f64797ff2

Best regards,
-- 
Luca Weiss <luca.weiss@fairphone.com>

[PATCH v5 1/5] dt-bindings: ufs: qcom: Add reg-names property for ICE

[Luca Weiss]

The code in ufs-qcom-ice.c needs the ICE reg to be named "ice". Add this
in the bindings so the existing dts can validate successfully.

Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
---
 Documentation/devicetree/bindings/ufs/qcom,ufs.yaml | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/Documentation/devicetree/bindings/ufs/qcom,ufs.yaml b/Documentation/devicetree/bindings/ufs/qcom,ufs.yaml
index bdfa86a0cc98..4cc3f8f03b33 100644
--- a/Documentation/devicetree/bindings/ufs/qcom,ufs.yaml
+++ b/Documentation/devicetree/bindings/ufs/qcom,ufs.yaml
@@ -79,6 +79,11 @@ properties:
     minItems: 1
     maxItems: 2
 
+  reg-names:
+    items:
+      - const: std
+      - const: ice
+
   required-opps:
     maxItems: 1
 
@@ -134,6 +139,8 @@ allOf:
         reg:
           minItems: 1
           maxItems: 1
+        reg-names:
+          maxItems: 1
 
   - if:
       properties:
@@ -162,6 +169,10 @@ allOf:
         reg:
           minItems: 2
           maxItems: 2
+        reg-names:
+          minItems: 2
+      required:
+        - reg-names
 
   - if:
       properties:
@@ -190,6 +201,8 @@ allOf:
         reg:
           minItems: 1
           maxItems: 1
+        reg-names:
+          maxItems: 1
 
     # TODO: define clock bindings for qcom,msm8994-ufshc
 

-- 
2.41.0

[PATCH v5 2/5] dt-bindings: ufs: qcom: Add sm6115 binding

[Luca Weiss]

From: Iskren Chernev <me@iskren.info>

Add SM6115 UFS to DT schema.

Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Iskren Chernev <me@iskren.info>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
---
 .../devicetree/bindings/ufs/qcom,ufs.yaml          | 30 ++++++++++++++++++++++
 1 file changed, 30 insertions(+)

diff --git a/Documentation/devicetree/bindings/ufs/qcom,ufs.yaml b/Documentation/devicetree/bindings/ufs/qcom,ufs.yaml
index 4cc3f8f03b33..2b0831622cf0 100644
--- a/Documentation/devicetree/bindings/ufs/qcom,ufs.yaml
+++ b/Documentation/devicetree/bindings/ufs/qcom,ufs.yaml
@@ -29,6 +29,7 @@ properties:
           - qcom,sa8775p-ufshc
           - qcom,sc8280xp-ufshc
           - qcom,sdm845-ufshc
+          - qcom,sm6115-ufshc
           - qcom,sm6350-ufshc
           - qcom,sm8150-ufshc
           - qcom,sm8250-ufshc
@@ -204,6 +205,35 @@ allOf:
         reg-names:
           maxItems: 1
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sm6115-ufshc
+    then:
+      properties:
+        clocks:
+          minItems: 8
+          maxItems: 8
+        clock-names:
+          items:
+            - const: core_clk
+            - const: bus_aggr_clk
+            - const: iface_clk
+            - const: core_clk_unipro
+            - const: ref_clk
+            - const: tx_lane0_sync_clk
+            - const: rx_lane0_sync_clk
+            - const: ice_core_clk
+        reg:
+          minItems: 2
+          maxItems: 2
+        reg-names:
+          minItems: 2
+      required:
+        - reg-names
+
     # TODO: define clock bindings for qcom,msm8994-ufshc
 
   - if:

-- 
2.41.0

[PATCH v5 3/5] dt-bindings: ufs: qcom: Add ICE to sm8450 example

[Luca Weiss]

SM8450 actually supports ICE (Inline Crypto Engine) so adjust the
example to match.

Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
---
 Documentation/devicetree/bindings/ufs/qcom,ufs.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/ufs/qcom,ufs.yaml b/Documentation/devicetree/bindings/ufs/qcom,ufs.yaml
index 2b0831622cf0..462ead5a1cec 100644
--- a/Documentation/devicetree/bindings/ufs/qcom,ufs.yaml
+++ b/Documentation/devicetree/bindings/ufs/qcom,ufs.yaml
@@ -317,5 +317,6 @@ examples:
                             <0 0>,
                             <0 0>,
                             <0 0>;
+            qcom,ice = <&ice>;
         };
     };

-- 
2.41.0

[PATCH v5 4/5] dt-bindings: crypto: ice: Document sm8450 inline crypto engine

[Luca Weiss]

Document the compatible used for the inline crypto engine found on
SM8450.

Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
---
 Documentation/devicetree/bindings/crypto/qcom,inline-crypto-engine.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/crypto/qcom,inline-crypto-engine.yaml b/Documentation/devicetree/bindings/crypto/qcom,inline-crypto-engine.yaml
index 92e1d76e29ee..7da9aa82d837 100644
--- a/Documentation/devicetree/bindings/crypto/qcom,inline-crypto-engine.yaml
+++ b/Documentation/devicetree/bindings/crypto/qcom,inline-crypto-engine.yaml
@@ -13,6 +13,7 @@ properties:
   compatible:
     items:
       - enum:
+          - qcom,sm8450-inline-crypto-engine
           - qcom,sm8550-inline-crypto-engine
       - const: qcom,inline-crypto-engine
 

-- 
2.41.0

[PATCH v5 5/5] arm64: dts: qcom: sm8450: Use standalone ICE node for UFS

[Luca Weiss]

With the ICE driver now merged let's convert the ufs node to use the new
style.

Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
---
 arch/arm64/boot/dts/qcom/sm8450.dtsi | 22 +++++++++++++---------
 1 file changed, 13 insertions(+), 9 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
index 5cd7296c7660..79627117a776 100644
--- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
@@ -4120,9 +4120,7 @@ system-cache-controller@19200000 {
 		ufs_mem_hc: ufshc@1d84000 {
 			compatible = "qcom,sm8450-ufshc", "qcom,ufshc",
 				     "jedec,ufs-2.0";
-			reg = <0 0x01d84000 0 0x3000>,
-			      <0 0x01d88000 0 0x8000>;
-			reg-names = "std", "ice";
+			reg = <0 0x01d84000 0 0x3000>;
 			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
 			phys = <&ufs_mem_phy_lanes>;
 			phy-names = "ufsphy";
@@ -4147,8 +4145,7 @@ ufs_mem_hc: ufshc@1d84000 {
 				"ref_clk",
 				"tx_lane0_sync_clk",
 				"rx_lane0_sync_clk",
-				"rx_lane1_sync_clk",
-				"ice_core_clk";
+				"rx_lane1_sync_clk";
 			clocks =
 				<&gcc GCC_UFS_PHY_AXI_CLK>,
 				<&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
@@ -4157,8 +4154,7 @@ ufs_mem_hc: ufshc@1d84000 {
 				<&rpmhcc RPMH_CXO_CLK>,
 				<&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
 				<&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
-				<&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>,
-				<&gcc GCC_UFS_PHY_ICE_CORE_CLK>;
+				<&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
 			freq-table-hz =
 				<75000000 300000000>,
 				<0 0>,
@@ -4167,8 +4163,9 @@ ufs_mem_hc: ufshc@1d84000 {
 				<75000000 300000000>,
 				<0 0>,
 				<0 0>,
-				<0 0>,
-				<75000000 300000000>;
+				<0 0>;
+			qcom,ice = <&ice>;
+
 			status = "disabled";
 		};
 
@@ -4198,6 +4195,13 @@ ufs_mem_phy_lanes: phy@1d87400 {
 			};
 		};
 
+		ice: crypto@1d88000 {
+			compatible = "qcom,sm8450-inline-crypto-engine",
+				     "qcom,inline-crypto-engine";
+			reg = <0 0x01d88000 0 0x8000>;
+			clocks = <&gcc GCC_UFS_PHY_ICE_CORE_CLK>;
+		};
+
 		cryptobam: dma-controller@1dc4000 {
 			compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0";
 			reg = <0 0x01dc4000 0 0x28000>;

-- 
2.41.0

Re: [PATCH v5 3/5] dt-bindings: ufs: qcom: Add ICE to sm8450 example

[Rob Herring]

On Tue, 27 Jun 2023 10:28:03 +0200, Luca Weiss wrote:
> SM8450 actually supports ICE (Inline Crypto Engine) so adjust the
> example to match.
> 
> Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
> ---
>  Documentation/devicetree/bindings/ufs/qcom,ufs.yaml | 1 +
>  1 file changed, 1 insertion(+)
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/ufs/qcom,ufs.example.dtb: ufs@1d84000: Unevaluated properties are not allowed ('qcom,ice' was unexpected)
	from schema $id: http://devicetree.org/schemas/ufs/qcom,ufs.yaml#

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20221209-dt-binding-ufs-v5-3-c9a58c0a53f5@fairphone.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.

Re: [PATCH v5 3/5] dt-bindings: ufs: qcom: Add ICE to sm8450 example

[Luca Weiss]

On Tue Jun 27, 2023 at 11:55 AM CEST, Rob Herring wrote:
>
> On Tue, 27 Jun 2023 10:28:03 +0200, Luca Weiss wrote:
> > SM8450 actually supports ICE (Inline Crypto Engine) so adjust the
> > example to match.
> > 
> > Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
> > ---
> >  Documentation/devicetree/bindings/ufs/qcom,ufs.yaml | 1 +
> >  1 file changed, 1 insertion(+)
> > 
>
> My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
> on your patch (DT_CHECKER_FLAGS is new in v5.13):
>
> yamllint warnings/errors:
>
> dtschema/dtc warnings/errors:
> /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/ufs/qcom,ufs.example.dtb: ufs@1d84000: Unevaluated properties are not allowed ('qcom,ice' was unexpected)
> 	from schema $id: http://devicetree.org/schemas/ufs/qcom,ufs.yaml#

qcom,ice should land with v5.4

https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/?id=29a6d1215b7cd5fdff9c3c31ea26076a694ee0a3

And as mentioned in the cover letter, validation will still fail with
without the extra patch linked there (which is not in -next yet).

Regards
Luca

>
> doc reference errors (make refcheckdocs):
>
> See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20221209-dt-binding-ufs-v5-3-c9a58c0a53f5@fairphone.com
>
> The base for the series is generally the latest rc1. A different dependency
> should be noted in *this* patch.
>
> If you already ran 'make dt_binding_check' and didn't see the above
> error(s), then make sure 'yamllint' is installed and dt-schema is up to
> date:
>
> pip3 install dtschema --upgrade
>
> Please check and re-submit after running the above command yourself. Note
> that DT_SCHEMA_FILES can be set to your schema file to speed up checking
> your schema. However, it must be unset to test all examples with your schema.

Re: [PATCH v5 5/5] arm64: dts: qcom: sm8450: Use standalone ICE node for UFS

[Konrad Dybcio]

On 27.06.2023 10:28, Luca Weiss wrote:
> With the ICE driver now merged let's convert the ufs node to use the new
> style.
> 
> Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad
>  arch/arm64/boot/dts/qcom/sm8450.dtsi | 22 +++++++++++++---------
>  1 file changed, 13 insertions(+), 9 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
> index 5cd7296c7660..79627117a776 100644
> --- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
> @@ -4120,9 +4120,7 @@ system-cache-controller@19200000 {
>  		ufs_mem_hc: ufshc@1d84000 {
>  			compatible = "qcom,sm8450-ufshc", "qcom,ufshc",
>  				     "jedec,ufs-2.0";
> -			reg = <0 0x01d84000 0 0x3000>,
> -			      <0 0x01d88000 0 0x8000>;
> -			reg-names = "std", "ice";
> +			reg = <0 0x01d84000 0 0x3000>;
>  			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
>  			phys = <&ufs_mem_phy_lanes>;
>  			phy-names = "ufsphy";
> @@ -4147,8 +4145,7 @@ ufs_mem_hc: ufshc@1d84000 {
>  				"ref_clk",
>  				"tx_lane0_sync_clk",
>  				"rx_lane0_sync_clk",
> -				"rx_lane1_sync_clk",
> -				"ice_core_clk";
> +				"rx_lane1_sync_clk";
>  			clocks =
>  				<&gcc GCC_UFS_PHY_AXI_CLK>,
>  				<&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
> @@ -4157,8 +4154,7 @@ ufs_mem_hc: ufshc@1d84000 {
>  				<&rpmhcc RPMH_CXO_CLK>,
>  				<&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
>  				<&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
> -				<&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>,
> -				<&gcc GCC_UFS_PHY_ICE_CORE_CLK>;
> +				<&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
>  			freq-table-hz =
>  				<75000000 300000000>,
>  				<0 0>,
> @@ -4167,8 +4163,9 @@ ufs_mem_hc: ufshc@1d84000 {
>  				<75000000 300000000>,
>  				<0 0>,
>  				<0 0>,
> -				<0 0>,
> -				<75000000 300000000>;
> +				<0 0>;
> +			qcom,ice = <&ice>;
> +
>  			status = "disabled";
>  		};
>  
> @@ -4198,6 +4195,13 @@ ufs_mem_phy_lanes: phy@1d87400 {
>  			};
>  		};
>  
> +		ice: crypto@1d88000 {
> +			compatible = "qcom,sm8450-inline-crypto-engine",
> +				     "qcom,inline-crypto-engine";
> +			reg = <0 0x01d88000 0 0x8000>;
> +			clocks = <&gcc GCC_UFS_PHY_ICE_CORE_CLK>;
> +		};
> +
>  		cryptobam: dma-controller@1dc4000 {
>  			compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0";
>  			reg = <0 0x01dc4000 0 0x28000>;
> 

Re: [PATCH v5 3/5] dt-bindings: ufs: qcom: Add ICE to sm8450 example

[Luca Weiss]

On Tue Jun 27, 2023 at 12:07 PM CEST, Luca Weiss wrote:
> On Tue Jun 27, 2023 at 11:55 AM CEST, Rob Herring wrote:
> >
> > On Tue, 27 Jun 2023 10:28:03 +0200, Luca Weiss wrote:
> > > SM8450 actually supports ICE (Inline Crypto Engine) so adjust the
> > > example to match.
> > > 
> > > Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
> > > ---
> > >  Documentation/devicetree/bindings/ufs/qcom,ufs.yaml | 1 +
> > >  1 file changed, 1 insertion(+)
> > > 
> >
> > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
> > on your patch (DT_CHECKER_FLAGS is new in v5.13):
> >
> > yamllint warnings/errors:
> >
> > dtschema/dtc warnings/errors:
> > /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/ufs/qcom,ufs.example.dtb: ufs@1d84000: Unevaluated properties are not allowed ('qcom,ice' was unexpected)
> > 	from schema $id: http://devicetree.org/schemas/ufs/qcom,ufs.yaml#
>
> qcom,ice should land with v5.4

Sorry, obviously wrong version: I meant v6.5

>
> https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/?id=29a6d1215b7cd5fdff9c3c31ea26076a694ee0a3
>
> And as mentioned in the cover letter, validation will still fail with
> without the extra patch linked there (which is not in -next yet).
>
> Regards
> Luca
>
> >
> > doc reference errors (make refcheckdocs):
> >
> > See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20221209-dt-binding-ufs-v5-3-c9a58c0a53f5@fairphone.com
> >
> > The base for the series is generally the latest rc1. A different dependency
> > should be noted in *this* patch.
> >
> > If you already ran 'make dt_binding_check' and didn't see the above
> > error(s), then make sure 'yamllint' is installed and dt-schema is up to
> > date:
> >
> > pip3 install dtschema --upgrade
> >
> > Please check and re-submit after running the above command yourself. Note
> > that DT_SCHEMA_FILES can be set to your schema file to speed up checking
> > your schema. However, it must be unset to test all examples with your schema.

Re: [PATCH v5 1/5] dt-bindings: ufs: qcom: Add reg-names property for ICE

[Krzysztof Kozlowski]

On 27/06/2023 10:28, Luca Weiss wrote:
> The code in ufs-qcom-ice.c needs the ICE reg to be named "ice". Add this
> in the bindings so the existing dts can validate successfully.
> 
> Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
> ---
>  Documentation/devicetree/bindings/ufs/qcom,ufs.yaml | 13 +++++++++++++
>  1 file changed, 13 insertions(+)
> 


Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof

Re: [PATCH v5 4/5] dt-bindings: crypto: ice: Document sm8450 inline crypto engine

[Krzysztof Kozlowski]

On 27/06/2023 10:28, Luca Weiss wrote:
> Document the compatible used for the inline crypto engine found on
> SM8450.
> 
> Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
> ---


Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof

Re: [PATCH v5 3/5] dt-bindings: ufs: qcom: Add ICE to sm8450 example

[Rob Herring]

On Tue, 27 Jun 2023 10:28:03 +0200, Luca Weiss wrote:
> SM8450 actually supports ICE (Inline Crypto Engine) so adjust the
> example to match.
> 
> Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
> ---
>  Documentation/devicetree/bindings/ufs/qcom,ufs.yaml | 1 +
>  1 file changed, 1 insertion(+)
> 

Acked-by: Rob Herring <robh@kernel.org>

Re: (subset) [PATCH v5 0/5] Fix some issues in QCOM UFS bindings

[Bjorn Andersson]

On Tue, 27 Jun 2023 10:28:00 +0200, Luca Weiss wrote:
> This series aims to solve the dtbs_check errors from the qcom ufs
> bindings. It has changed in scope a bit since v1, so it may be a bit all
> over the place.
> 
> Please note, that I have not tested the sm8450.dtsi patch since I don't
> have any hardware there. Testing would be appreciated.
> 
> [...]

Applied, thanks!

[5/5] arm64: dts: qcom: sm8450: Use standalone ICE node for UFS
      commit: 86b0aef435851dec9e5202d22dfbfff56da4440c

Best regards,
-- 
Bjorn Andersson <andersson@kernel.org>