From: "Luca Weiss" <luca.weiss@fairphone.com>
To: "Thomas Zimmermann" <tzimmermann@suse.de>,
"Hans de Goede" <hdegoede@redhat.com>,
"Maarten Lankhorst" <maarten.lankhorst@linux.intel.com>,
"Maxime Ripard" <mripard@kernel.org>,
"David Airlie" <airlied@gmail.com>,
"Simona Vetter" <simona@ffwll.ch>,
"Rob Herring" <robh@kernel.org>,
"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
"Conor Dooley" <conor+dt@kernel.org>,
"Javier Martinez Canillas" <javierm@redhat.com>,
"Helge Deller" <deller@gmx.de>
Cc: <linux-fbdev@vger.kernel.org>, <dri-devel@lists.freedesktop.org>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH 3/3] fbdev/simplefb: Add support for interconnect paths
Date: Fri, 20 Jun 2025 13:07:49 +0200 [thread overview]
Message-ID: <DARBA03BEQA1.3KLHCBFNTVXKJ@fairphone.com> (raw)
In-Reply-To: <cf29862b-496b-4825-aa0f-493eb44838a5@suse.de>
Hi Thomas,
On Fri Jun 20, 2025 at 1:02 PM CEST, Thomas Zimmermann wrote:
> Hi
>
> Am 20.06.25 um 12:31 schrieb Luca Weiss:
>> Some devices might require keeping an interconnect path alive so that
>> the framebuffer continues working. Add support for that by setting the
>> bandwidth requirements appropriately for all provided interconnect
>> paths.
>>
>> Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
>> ---
>> drivers/video/fbdev/simplefb.c | 83 ++++++++++++++++++++++++++++++++++++++++++
>> 1 file changed, 83 insertions(+)
>>
>> diff --git a/drivers/video/fbdev/simplefb.c b/drivers/video/fbdev/simplefb.c
>> index be95fcddce4c8ca794826b805cd7dad2985bd637..ca73e079fd13550ddc779e84db80f7f9b743d074 100644
>> --- a/drivers/video/fbdev/simplefb.c
>> +++ b/drivers/video/fbdev/simplefb.c
>> @@ -27,6 +27,7 @@
>> #include <linux/parser.h>
>> #include <linux/pm_domain.h>
>> #include <linux/regulator/consumer.h>
>> +#include <linux/interconnect.h>
>
> With alphabetical sorting:
>
> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Thanks for the reviews!
For both simpledrm.c and simplefb.c, the includes are not strictly
alphabetically sorted (1 mis-sort in simpledrm, 3 in simplefb), shall I
just try and slot it into the best fitting place, or make them sorted in
my patch? Or I can add a separate commit for each driver before to sort
them.
Let me know!
Regards
Luca
>
> Best regards
> Thomas
>
>
>>
>> static const struct fb_fix_screeninfo simplefb_fix = {
>> .id = "simple",
>> @@ -89,6 +90,10 @@ struct simplefb_par {
>> u32 regulator_count;
>> struct regulator **regulators;
>> #endif
>> +#if defined CONFIG_OF && defined CONFIG_INTERCONNECT
>> + unsigned int icc_count;
>> + struct icc_path **icc_paths;
>> +#endif
>> };
>>
>> static void simplefb_clocks_destroy(struct simplefb_par *par);
>> @@ -525,6 +530,80 @@ static int simplefb_attach_genpds(struct simplefb_par *par,
>> }
>> #endif
>>
>> +#if defined CONFIG_OF && defined CONFIG_PM_GENERIC_DOMAINS
>> +/*
>> + * Generic interconnect path handling code.
>> + */
>> +static void simplefb_detach_icc(void *res)
>> +{
>> + struct simplefb_par *par = res;
>> + int i;
>> +
>> + for (i = par->icc_count - 1; i >= 0; i--) {
>> + if (!IS_ERR_OR_NULL(par->icc_paths[i]))
>> + icc_put(par->icc_paths[i]);
>> + }
>> +}
>> +
>> +static int simplefb_attach_icc(struct simplefb_par *par,
>> + struct platform_device *pdev)
>> +{
>> + struct device *dev = &pdev->dev;
>> + int ret, count, i;
>> +
>> + count = of_count_phandle_with_args(dev->of_node, "interconnects",
>> + "#interconnect-cells");
>> + if (count < 0)
>> + return 0;
>> +
>> + /* An interconnect path consists of two elements */
>> + if (count % 2) {
>> + dev_err(dev, "invalid interconnects value\n");
>> + return -EINVAL;
>> + }
>> + par->icc_count = count / 2;
>> +
>> + par->icc_paths = devm_kcalloc(dev, par->icc_count,
>> + sizeof(*par->icc_paths),
>> + GFP_KERNEL);
>> + if (!par->icc_paths)
>> + return -ENOMEM;
>> +
>> + for (i = 0; i < par->icc_count; i++) {
>> + par->icc_paths[i] = of_icc_get_by_index(dev, i);
>> + if (IS_ERR_OR_NULL(par->icc_paths[i])) {
>> + ret = PTR_ERR(par->icc_paths[i]);
>> + if (ret == -EPROBE_DEFER)
>> + goto err;
>> + dev_err(dev, "failed to get interconnect path %u: %d\n", i, ret);
>> + continue;
>> + }
>> +
>> + ret = icc_set_bw(par->icc_paths[i], 0, UINT_MAX);
>> + if (ret) {
>> + dev_err(dev, "failed to set interconnect bandwidth %u: %d\n", i, ret);
>> + continue;
>> + }
>> + }
>> +
>> + return devm_add_action_or_reset(dev, simplefb_detach_icc, par);
>> +
>> +err:
>> + while (i) {
>> + --i;
>> + if (!IS_ERR_OR_NULL(par->icc_paths[i]))
>> + icc_put(par->icc_paths[i]);
>> + }
>> + return ret;
>> +}
>> +#else
>> +static int simplefb_attach_icc(struct simplefb_par *par,
>> + struct platform_device *pdev)
>> +{
>> + return 0;
>> +}
>> +#endif
>> +
>> static int simplefb_probe(struct platform_device *pdev)
>> {
>> int ret;
>> @@ -615,6 +694,10 @@ static int simplefb_probe(struct platform_device *pdev)
>> if (ret < 0)
>> goto error_regulators;
>>
>> + ret = simplefb_attach_icc(par, pdev);
>> + if (ret < 0)
>> + goto error_regulators;
>> +
>> simplefb_clocks_enable(par, pdev);
>> simplefb_regulators_enable(par, pdev);
>>
>>
next prev parent reply other threads:[~2025-06-20 11:07 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-06-20 10:31 [PATCH 0/3] Add interconnent support for simpledrm/simplefb Luca Weiss
2025-06-20 10:31 ` [PATCH 1/3] dt-bindings: display: simple-framebuffer: Add interconnects property Luca Weiss
2025-06-20 11:03 ` Thomas Zimmermann
2025-06-20 10:31 ` [PATCH 2/3] drm/sysfb: simpledrm: Add support for interconnect paths Luca Weiss
2025-06-20 11:01 ` Thomas Zimmermann
2025-06-20 10:31 ` [PATCH 3/3] fbdev/simplefb: " Luca Weiss
2025-06-20 11:02 ` Thomas Zimmermann
2025-06-20 11:07 ` Luca Weiss [this message]
2025-06-20 11:28 ` Thomas Zimmermann
2025-06-20 12:07 ` Luca Weiss
2025-06-20 12:36 ` Thomas Zimmermann
2025-06-20 13:09 ` Luca Weiss
2025-06-22 2:21 ` kernel test robot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=DARBA03BEQA1.3KLHCBFNTVXKJ@fairphone.com \
--to=luca.weiss@fairphone.com \
--cc=airlied@gmail.com \
--cc=conor+dt@kernel.org \
--cc=deller@gmx.de \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=hdegoede@redhat.com \
--cc=javierm@redhat.com \
--cc=krzk+dt@kernel.org \
--cc=linux-fbdev@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=maarten.lankhorst@linux.intel.com \
--cc=mripard@kernel.org \
--cc=robh@kernel.org \
--cc=simona@ffwll.ch \
--cc=tzimmermann@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox