From: Frank Li <Frank.Li@oss.nxp.com>
To: Manikandan Muralidharan <manikandan.m@microchip.com>
Cc: alexandre.belloni@bootlin.com, Frank.Li@nxp.com, robh@kernel.org,
krzk+dt@kernel.org, conor+dt@kernel.org,
nicolas.ferre@microchip.com, claudiu.beznea@tuxon.dev,
linux@armlinux.org.uk, mturquette@baylibre.com, sboyd@kernel.org,
bmasney@redhat.com, aubin.constans@microchip.com,
Ryan.Wanner@microchip.com, romain.sioen@microchip.com,
tytso@mit.edu, cristian.birsan@microchip.com,
adrian.hunter@intel.com, npitre@baylibre.com,
linux-i3c@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, linux-clk@vger.kernel.org
Subject: Re: [PATCH v7 3/5] i3c: mipi-i3c-hci: add microchip sama7d65 SoC compatible with the required quirk
Date: Mon, 8 Jun 2026 13:04:24 -0400 [thread overview]
Message-ID: <aib2GC4dtOBVFxpU@lizhi-Precision-Tower-5810> (raw)
In-Reply-To: <20260525092405.1514213-4-manikandan.m@microchip.com>
On Mon, May 25, 2026 at 02:54:03PM +0530, Manikandan Muralidharan wrote:
> Add support for microchip sama7d65 SoC I3C HCI master only IP
> with additional clock support to enable bulk clock acquisition
> and apply the required quirks.
>
> Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
> Signed-off-by: Manikandan Muralidharan <manikandan.m@microchip.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
> ---
> Changes in v7:
> - Use (void *)(ulong) cast instead of direct (void *) cast in
> of_device_id.data for pointer-size safety across architectures
> - Update commit message body to explicitly mention quirk application
>
> Changes in v6:
> - Reorder local variable definitions in i3c_hci_probe in descending
> order of line length
>
> Changes in v5:
> - Remove HCI_QUIRK_CLK_SUPPORT quirk and call
> devm_clk_bulk_get_all_enabled unconditionally, eliminating the
> need for a clock-specific quirk flag
>
> Changes in v4:
> - Remove the clock index variable MCHP_I3C_CLK_IDX as it is no
> longer needed after switching to bulk clock handling
>
> Changes in v3:
> - Make use of existing HCI_QUIRK_* code base instead of introducing
> separate MCHP_HCI_QUIRK_* flags
> - Introduce HCI_QUIRK_CLK_SUPPORT to handle peripheral and system
> generic clk in bulk
>
> Changes in v2:
> - Platform specific changes integrated in the existing mipi-i3c-hci
> driver by introducing separate MCHP_HCI_QUIRK_* quirks and vendor
> specific quirk files rather than a standalone driver
>
> drivers/i3c/master/mipi-i3c-hci/core.c | 10 ++++++++++
> 1 file changed, 10 insertions(+)
>
> diff --git a/drivers/i3c/master/mipi-i3c-hci/core.c b/drivers/i3c/master/mipi-i3c-hci/core.c
> index b781dbed2165..4cdf2abd4219 100644
> --- a/drivers/i3c/master/mipi-i3c-hci/core.c
> +++ b/drivers/i3c/master/mipi-i3c-hci/core.c
> @@ -8,6 +8,7 @@
> */
>
> #include <linux/bitfield.h>
> +#include <linux/clk.h>
> #include <linux/device.h>
> #include <linux/errno.h>
> #include <linux/i3c/master.h>
> @@ -969,6 +970,7 @@ static int i3c_hci_init(struct i3c_hci *hci)
> static int i3c_hci_probe(struct platform_device *pdev)
> {
> const struct mipi_i3c_hci_platform_data *pdata = pdev->dev.platform_data;
> + struct clk_bulk_data *clks;
> struct i3c_hci *hci;
> int irq, ret;
>
> @@ -1001,6 +1003,11 @@ static int i3c_hci_probe(struct platform_device *pdev)
> if (!hci->quirks && platform_get_device_id(pdev))
> hci->quirks = platform_get_device_id(pdev)->driver_data;
>
> + ret = devm_clk_bulk_get_all_enabled(&pdev->dev, &clks);
> + if (ret < 0)
> + return dev_err_probe(&pdev->dev, ret,
> + "Failed to get clocks\n");
> +
> ret = i3c_hci_init(hci);
> if (ret)
> return ret;
> @@ -1031,6 +1038,9 @@ static void i3c_hci_remove(struct platform_device *pdev)
>
> static const __maybe_unused struct of_device_id i3c_hci_of_match[] = {
> { .compatible = "mipi-i3c-hci", },
> + { .compatible = "microchip,sama7d65-i3c-hci",
> + .data = (void *)(ulong)(HCI_QUIRK_PIO_MODE | HCI_QUIRK_OD_PP_TIMING |
> + HCI_QUIRK_RESP_BUF_THLD) },
> {},
> };
> MODULE_DEVICE_TABLE(of, i3c_hci_of_match);
> --
> 2.25.1
>
next prev parent reply other threads:[~2026-06-08 17:04 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-05-25 9:24 [PATCH v7 0/5] Add microchip sama7d65 SoC I3C support Manikandan Muralidharan
2026-05-25 9:24 ` [PATCH v7 1/5] dt-bindings: i3c: mipi-i3c-hci: add Microchip SAMA7D65 compatible Manikandan Muralidharan
2026-05-25 9:24 ` [PATCH v7 2/5] clk: at91: sama7d65: add peripheral clock for I3C Manikandan Muralidharan
2026-05-31 14:50 ` Claudiu Beznea
2026-05-25 9:24 ` [PATCH v7 3/5] i3c: mipi-i3c-hci: add microchip sama7d65 SoC compatible with the required quirk Manikandan Muralidharan
2026-05-25 10:23 ` sashiko-bot
2026-06-02 16:57 ` Frank Li
2026-06-04 10:53 ` Manikandan.M
2026-06-08 17:04 ` Frank Li [this message]
2026-05-25 9:24 ` [PATCH v7 4/5] ARM: dts: microchip: add I3C controller Manikandan Muralidharan
2026-05-25 10:30 ` sashiko-bot
2026-05-25 9:24 ` [PATCH v7 5/5] ARM: configs: at91: sama7: add sama7d65 i3c-hci Manikandan Muralidharan
2026-06-07 12:19 ` [PATCH v7 0/5] Add microchip sama7d65 SoC I3C support Claudiu Beznea
2026-06-14 20:39 ` (subset) " Alexandre Belloni
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=aib2GC4dtOBVFxpU@lizhi-Precision-Tower-5810 \
--to=frank.li@oss.nxp.com \
--cc=Frank.Li@nxp.com \
--cc=Ryan.Wanner@microchip.com \
--cc=adrian.hunter@intel.com \
--cc=alexandre.belloni@bootlin.com \
--cc=aubin.constans@microchip.com \
--cc=bmasney@redhat.com \
--cc=claudiu.beznea@tuxon.dev \
--cc=conor+dt@kernel.org \
--cc=cristian.birsan@microchip.com \
--cc=devicetree@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-i3c@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=manikandan.m@microchip.com \
--cc=mturquette@baylibre.com \
--cc=nicolas.ferre@microchip.com \
--cc=npitre@baylibre.com \
--cc=robh@kernel.org \
--cc=romain.sioen@microchip.com \
--cc=sboyd@kernel.org \
--cc=tytso@mit.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox