Re: [PATCH v3 0/3] arm64: dts: qcom: Add LVDS display overlays for lemans, monaco and rb3gen2

[Vishnu Saini <vishnu.saini@oss.qualcomm.com>]

On Wed, Sep 16, 2026 at 06:47:16PM -0500, Bjorn Andersson wrote:
> On Sat, Sep 05, 2026 at 07:00:14AM +0530, Vishnu Saini wrote:
> > This series adds LVDS display support via device tree overlays for three
> > Qualcomm platforms: Lemans EVK, Monaco EVK, and QCS6490 RB3 Gen2
> > industrial mezzanine.
> > 
> > All three platforms use the Lontium LT9211C DSI-to-LVDS bridge chip, which
> > converts DSI output to dual-channel LVDS for driving 1920x1080 panels.
> > The overlays are structured to be applied on top of the existing IFP
> > mezzanine overlay.
> > 
> > This series depends on:
> >   [PATCH v8 0/2] This series adds LT9211C bridge driver by extending LT9211
> >   https://lore.kernel.org/all/20260904-add-lt9211c-bridge-v8-0-36d66168e176@oss.qualcomm.com/
> > 
> > which adds lontium,lt9211c compatible support to the lontium-lt9211 driver
> > and extends the binding YAML accordingly,
> > 
> >   [PATCH v4 0/2] This series adds BOE DV215FHM-R01 LVDS panel support
> >   https://lore.kernel.org/all/20260903-b4-lvds-panel-doc-v4-0-861738a0d5de@oss.qualcomm.com/
> > 
> > which documents the boe,dv215fhm-r01 panel and adds the timings used by these
> > overlays,
> 
> Then get those merge first, so that I don't have to spend time figuring
> that out for you.
Thank you, next revision will be posted once dependencies are applied.
 
> > and:
> > 
> >   arm64: defconfig: Enable Lontium LT9211 driver
> >   https://lore.kernel.org/all/20260904-for-next-lt9211-defconfig-v1-1-97221f0109d7@oss.qualcomm.com/
> > 
> > which enables the driver in defconfig.
> 
> This is not a dependency for your changes to be merged.
Ok, will remove it from dependency list.
 
> Regards,
> Bjorn
> 
> > 
> > Signed-off-by: Vishnu Saini <vishnu.saini@oss.qualcomm.com>
> > ---
> > Changes in v3:
> > - Removed redundant status = "okay" on nodes that are enabled by
> >   default [Konrad]
> > - Added a blank line between the last property and the following
> >   subnode throughout the port@N blocks [Konrad]
> > - Link to v2: https://lore.kernel.org/r/20260813-lvds-support-v2-0-6b11035e8ab0@oss.qualcomm.com
> > 
> > Changes in v2:
> > - Updated overlays to make them compatable with panel-simple-lvds-dual-ports.yaml [Rob (in panel series)]
> > - Added Empty lines before the status property  [Dmitry]
> > - Link to v0: https://lore.kernel.org/r/20260719-lvds-support-v1-0-1f1aca3213ba@oss.qualcomm.com
> > 
> > ---
> > Vishnu Saini (3):
> >       arm64: dts: qcom: lemans-evk: Add LVDS display overlay
> >       arm64: dts: qcom: monaco-evk: Add LVDS display overlay
> >       arm64: dts: qcom: qcs6490-rb3gen2: Add LVDS display overlay
> > 
> >  arch/arm64/boot/dts/qcom/Makefile                  |  14 +++
> >  .../dts/qcom/lemans-evk-lvds-boe,dv215fhm-r01.dtso | 113 ++++++++++++++++++++
> >  .../dts/qcom/monaco-evk-lvds-boe,dv215fhm-r01.dtso | 114 +++++++++++++++++++++
> >  ...industrial-mezzanine-lvds-boe,dv215fhm-r01.dtso | 106 +++++++++++++++++++
> >  4 files changed, 347 insertions(+)
> > ---
> > base-commit: ba20122d4c311bd9384f38e7ba1d0c122e21745d
> > change-id: 20260708-lvds-support-2d40d60654f1
> > prerequisite-message-id: <20260904-add-lt9211c-bridge-v8-0-36d66168e176@oss.qualcomm.com>
> > prerequisite-patch-id: dbba64d1ace696df388c5df3d1cb05a0701df194
> > prerequisite-patch-id: fac2b93f3e250589dffd7c076d2ef1aa7a2519a1
> > prerequisite-message-id: <20260903-b4-lvds-panel-doc-v4-0-861738a0d5de@oss.qualcomm.com>
> > prerequisite-patch-id: 1d3e40bbefcb2550afd81c5cced812a1d3b943a2
> > prerequisite-patch-id: bd3612ce053552e2ae7401a1217c4884413563f4
> > prerequisite-message-id: <20260904-for-next-lt9211-defconfig-v1-1-97221f0109d7@oss.qualcomm.com>
> > prerequisite-patch-id: 9e3233401819ca53c119e6cfab95b0c471ef254e
> > 
> > Best regards,
> > -- 
> > Vishnu Saini <vishnu.saini@oss.qualcomm.com>
> >