Devicetree
 help / color / mirror / Atom feed
From: Frank Li <Frank.li@oss.nxp.com>
To: Stefano Radaelli <stefano.radaelli21@gmail.com>
Cc: sashiko-reviews@lists.linux.dev, conor+dt@kernel.org,
	robh@kernel.org, Frank.Li@kernel.org, imx@lists.linux.dev,
	devicetree@vger.kernel.org
Subject: Re: [PATCH v2 2/3] arm64: dts: imx8mm-var-dart: add TPM support
Date: Thu, 17 Sep 2026 14:52:59 -0500	[thread overview]
Message-ID: <aqxFG-PnA-L1xvo0@SMW015318> (raw)
In-Reply-To: <aqw8C2YwvXOcRYPV@Lord-Beerus.station>

On Thu, Sep 17, 2026 at 09:14:19PM +0200, Stefano Radaelli wrote:
> On Thu, Sep 17, 2026 at 01:51:57PM -0500, Frank Li wrote:
> >
> > tpm_tis_core.c have not parser reset-gpios. ref
> >
> > static int reset_gpio_assert(struct reset_controller_dev *rc, unsigned long id)
> > {
> >         struct reset_gpio_priv *priv = rc_to_reset_gpio(rc);
> >
> >         return gpiod_set_value_cansleep(priv->reset, 1);
> > }
> >
> > suppose it should be GPIO_ACTIVE_LOW to assert reset line
> >
> > Frank
>
> Thanks Frank.
>
> You're right, tpm_tis_i2c currently does not parse a reset control.
> I have proposed a separate patch to add optional reset support using
> the reset framework:
>
> https://patchwork.kernel.org/project/linux-integrity/patch/20260917124211.136221-1-stefano.r@variscite.com/
>
> Also, the reset line is active-low, so you are right, GPIO_ACTIVE_LOW
> is the correct polarity here.
>
> Would you prefer me to send v3 without the TPM DTS patch for now,
> and add it back once the reset support patch has been accepted?

You leave reset-gpios if binding already here. Just need fix GPIO_ACTIVE_LOW

Frank

>
> Best Regards,
> Stefano

  reply	other threads:[~2026-09-17 19:53 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-09-17 15:41 [PATCH v2 0/3] arm64: dts: imx8mm-var-dart: update SoM support Stefano Radaelli
2026-09-17 15:41 ` [PATCH v2 1/3] arm64: dts: imx8mm-var-dart: configure SAI3 synchronous RX mode Stefano Radaelli
2026-09-17 15:41 ` [PATCH v2 2/3] arm64: dts: imx8mm-var-dart: add TPM support Stefano Radaelli
2026-09-17 15:50   ` sashiko-bot
2026-09-17 18:51     ` Frank Li
2026-09-17 19:14       ` Stefano Radaelli
2026-09-17 19:52         ` Frank Li [this message]
2026-09-17 15:41 ` [PATCH v2 3/3] arm64: dts: imx8mm-var-dart: increase PHY reset deassert delay Stefano Radaelli

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=aqxFG-PnA-L1xvo0@SMW015318 \
    --to=frank.li@oss.nxp.com \
    --cc=Frank.Li@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=imx@lists.linux.dev \
    --cc=robh@kernel.org \
    --cc=sashiko-reviews@lists.linux.dev \
    --cc=stefano.radaelli21@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox