Re: [PATCH 09/17] phy: qcom: edp: Add Nord AUX channel and VCO divider configuration tables

[Manivannan Sadhasivam <mani@kernel.org>]

On Fri, Sep 11, 2026 at 09:06:40PM +0530, Nabige Aala wrote:
> From: Ritesh Kumar <ritesh.kumar@oss.qualcomm.com>
> 
> Nord requires different AUX channel and VCO divider settings compared
> to existing SoCs.  Add edp_phy_aux_cfg_nord and edp_phy_vco_div_cfg_nord
> with values sourced from HPG Tables 2-1-a and 2-1-b respectively.
> 
> Signed-off-by: Ritesh Kumar <ritesh.kumar@oss.qualcomm.com>
> Signed-off-by: Nabige Aala <nabige.aala@oss.qualcomm.com>
> ---
>  drivers/phy/qualcomm/phy-qcom-edp.c | 19 +++++++++++++++++++
>  1 file changed, 19 insertions(+)
> 
> diff --git a/drivers/phy/qualcomm/phy-qcom-edp.c b/drivers/phy/qualcomm/phy-qcom-edp.c
> index 373f13b3d6d5..ee0d7f1a90fe 100644
> --- a/drivers/phy/qualcomm/phy-qcom-edp.c
> +++ b/drivers/phy/qualcomm/phy-qcom-edp.c
> @@ -1508,6 +1508,25 @@ static int qcom_edp_phy_probe(struct platform_device *pdev)
>  	return PTR_ERR_OR_ZERO(phy_provider);
>  }
>  
> +/*
> + * nord AUX config (eDP mode).
> + * From HPG Table 2-1-a: edp_phy_aux_bist.csv
> + * Index:  0     1     2     3     4     5     6     7     8     9    10    11    12
> + */
> +static const u8 edp_phy_aux_cfg_nord[DP_AUX_CFG_SIZE] = {
> +	0x00, 0x13, 0xa4, 0x00, 0x0a, 0x26, 0x0a, 0x03, 0x37, 0x03, 0x02, 0x02, 0x04,
> +};
> +
> +/*
> + * nord VCO_DIV config for eDP mode.
> + * From HPG Table 2-1-b AUX Clock Settings (eDP mode) - Nominal/Turbo column.
> + * Indices: [0]=1620, [1]=2700, [2]=5400, [3]=8100
> + */
> +static const u8 edp_phy_vco_div_cfg_nord[4] = {
> +	0x00, 0x00, 0x02, 0x01,
> +};
> +

From this patch onwards you are introducing -Wunused* warnings for each patch.
You *must not* do that.

If logical split is what you are aiming here, I can say that it isn't what you
are doing here.

Please group Nord SoC support in one patch and keep the preparatory patches
separate.

- Mani

-- 
மணிவண்ணன் சதாசிவம்