Re: [PATCH v2 12/15] drm/mediatek: mtk_hdmi: Split driver and add common probe function

["CK Hu (胡俊光)" <ck.hu@mediatek.com>]

Hi, Angelo:

On Thu, 2024-12-05 at 12:45 +0100, AngeloGioacchino Del Regno wrote:
> External email : Please do not click links or open attachments until you have verified the sender or the content.
> 
> 
> In preparation for adding a new driver for the HDMI TX v2 IP,
> split out the functions that will be common between the already
> present mtk_hdmi (v1) driver and the new one.
> 
> Since the probe flow for both drivers is 90% similar, add a common
> probe function that will be called from each driver's .probe()
> callback, avoiding lots of code duplication.
> 
> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
> ---

[snip]

>  static void mtk_hdmi_clk_disable_audio(struct mtk_hdmi *hdmi)
> @@ -1143,10 +886,11 @@ static void mtk_hdmi_clk_disable_audio(struct mtk_hdmi *hdmi)
>  static enum drm_connector_status
>  mtk_hdmi_update_plugged_status(struct mtk_hdmi *hdmi)
>  {
> -       bool connected;
> +       bool connected = true;
> 
>         mutex_lock(&hdmi->update_plugged_status_lock);
> -       connected = mtk_cec_hpd_high(hdmi->cec_dev);
> +       if (hdmi->cec_dev)

Only v1 would call mtk_hdmi_update_plugged_status() and v1 should has hdmi->cec_dev,
so this checking is redundant.

> +               connected = mtk_cec_hpd_high(hdmi->cec_dev);
>         if (hdmi->plugged_cb && hdmi->codec_dev)
>                 hdmi->plugged_cb(hdmi->codec_dev, connected);
>         mutex_unlock(&hdmi->update_plugged_status_lock);
> @@ -1254,18 +998,12 @@ static int mtk_hdmi_bridge_attach(struct drm_bridge *bridge,
>                         return ret;
>         }
> 
> -       mtk_cec_set_hpd_event(hdmi->cec_dev, mtk_hdmi_hpd_event, hdmi->dev);
> +       if (hdmi->cec_dev)

Ditto.

Regards,
CK

> +               mtk_cec_set_hpd_event(hdmi->cec_dev, mtk_hdmi_hpd_event, hdmi->dev);
> 
>         return 0;
>  }
>