* [RESEND][PATCH 0/6] Add NXP LS2088A platform support
From: Abhimanyu Saini @ 2016-11-08 9:34 UTC (permalink / raw)
To: devicetree-u79uwXL29TY76Z2rM5mHXA, robh-DgEjT+Ai2ygdnm+yROfE0A,
mark.rutland-5wv7dgnIgG8, shawnguo-DgEjT+Ai2ygdnm+yROfE0A
Cc: scott.wood-3arQi8VN3Tc,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
Abhimanyu Saini
This patchset adds support for the QorIQ LS2088A SoC
LS2088A SoC is similar to LS2080A SoC with a few differences like
it has A72 cores.
Supported targets are QDS and RDB boards. The updates
include binding updates, and addition of the ls2088a
device dtsi and dts files.
Abhimanyu Saini (6):
dt-bindings: arm: Update bindings for LS2088A targets
dt-bindings: pci: Update bindings for LS2088A
dt-bindings: mtd: fsl-quadspi: Update qspi bindings for LS2088A
dt-bindings: spi: Update dspi bindings for LS2088A
dt-bindings: gpio: Update gpio bindings for LS2088A
arm64: Add DTS support for FSL's LS2088A SoC
Documentation/devicetree/bindings/arm/fsl.txt | 7 +
.../devicetree/bindings/gpio/gpio-mpc8xxx.txt | 2 +-
.../devicetree/bindings/mtd/fsl-quadspi.txt | 4 +-
.../devicetree/bindings/pci/layerscape-pci.txt | 5 +-
.../devicetree/bindings/spi/spi-fsl-dspi.txt | 3 +-
arch/arm64/boot/dts/freescale/Makefile | 2 +
arch/arm64/boot/dts/freescale/fsl-ls2088a-qds.dts | 211 +++++++
arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts | 166 +++++
arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi | 703 +++++++++++++++++++++
9 files changed, 1096 insertions(+), 7 deletions(-)
create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls2088a-qds.dts
create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts
create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply
* Re: [PATCH 03/30] usb: dwc2: gadget: Add descriptor DMA binding
From: Felipe Balbi @ 2016-11-08 9:14 UTC (permalink / raw)
To: John Youn; +Cc: Vahram Aharonyan
In-Reply-To: <e0d302ebcbad32242da84894c173b743b9199f71.1478558343.git.johnyoun-HKixBCOQz3hWk0Htik3J/w@public.gmane.org>
[-- Attachment #1: Type: text/plain, Size: 1436 bytes --]
John Youn <johnyoun-HKixBCOQz3hWk0Htik3J/w@public.gmane.org> writes:
> From: Vahram Aharonyan <vahrama-HKixBCOQz3hWk0Htik3J/w@public.gmane.org>
>
> Add the devicetree binding to enable descriptor DMA and read it in to
> the corresponding parameter during probe.
>
> Signed-off-by: Vahram Aharonyan <vahrama-HKixBCOQz3hWk0Htik3J/w@public.gmane.org>
> Signed-off-by: John Youn <johnyoun-HKixBCOQz3hWk0Htik3J/w@public.gmane.org>
> ---
> Documentation/devicetree/bindings/usb/dwc2.txt | 1 +
> drivers/usb/dwc2/core.h | 4 ++++
> drivers/usb/dwc2/gadget.c | 11 +++++++++++
> drivers/usb/dwc2/params.c | 4 ++++
> 4 files changed, 20 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/usb/dwc2.txt b/Documentation/devicetree/bindings/usb/dwc2.txt
> index 389a461..1db9c37 100644
> --- a/Documentation/devicetree/bindings/usb/dwc2.txt
> +++ b/Documentation/devicetree/bindings/usb/dwc2.txt
> @@ -27,6 +27,7 @@ Refer to phy/phy-bindings.txt for generic phy consumer properties
> Refer to usb/generic.txt
> - snps,host-dma-disable: disable host DMA mode.
> - snps,gadget-dma-enable: enable gadget DMA mode.
> +- snps,gadget-dma-desc-enable: enable gadget DMA descriptor mode.
seems to be discoverable as well:
#define GHWCFG4_DESC_DMA_DYN (1 << 31)
#define GHWCFG4_DESC_DMA (1 << 30)
care to comment?
--
balbi
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 800 bytes --]
^ permalink raw reply
* Re: [PATCH 01/30] usb: dwc2: Deprecate g-use-dma binding
From: Felipe Balbi @ 2016-11-08 9:12 UTC (permalink / raw)
To: John Youn
In-Reply-To: <e99e9d8df77884671f94734109a1a8d76a0222c1.1478558343.git.johnyoun-HKixBCOQz3hWk0Htik3J/w@public.gmane.org>
[-- Attachment #1.1: Type: text/plain, Size: 2211 bytes --]
Hi,
John Youn <johnyoun-HKixBCOQz3hWk0Htik3J/w@public.gmane.org> writes:
> Add a vendor prefix and make the name more consistent by renaming it to
> "snps,gadget-dma-enable".
>
> Signed-off-by: John Youn <johnyoun-HKixBCOQz3hWk0Htik3J/w@public.gmane.org>
> ---
> Documentation/devicetree/bindings/usb/dwc2.txt | 5 ++++-
> arch/arm/boot/dts/rk3036.dtsi | 2 +-
> arch/arm/boot/dts/rk3288.dtsi | 2 +-
> arch/arm/boot/dts/rk3xxx.dtsi | 2 +-
> arch/arm64/boot/dts/hisilicon/hi6220.dtsi | 2 +-
> arch/arm64/boot/dts/rockchip/rk3368.dtsi | 2 +-
> drivers/usb/dwc2/params.c | 9 ++++++++-
> drivers/usb/dwc2/pci.c | 2 +-
> 8 files changed, 18 insertions(+), 8 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/usb/dwc2.txt b/Documentation/devicetree/bindings/usb/dwc2.txt
> index 9472111..389a461 100644
> --- a/Documentation/devicetree/bindings/usb/dwc2.txt
> +++ b/Documentation/devicetree/bindings/usb/dwc2.txt
> @@ -26,11 +26,14 @@ Refer to phy/phy-bindings.txt for generic phy consumer properties
> - dr_mode: shall be one of "host", "peripheral" and "otg"
> Refer to usb/generic.txt
> - snps,host-dma-disable: disable host DMA mode.
> -- g-use-dma: enable dma usage in gadget driver.
> +- snps,gadget-dma-enable: enable gadget DMA mode.
I don't see why you even have this binding. Looking through the code,
you have:
#define GHWCFG2_SLAVE_ONLY_ARCH 0
#define GHWCFG2_EXT_DMA_ARCH 1
#define GHWCFG2_INT_DMA_ARCH 2
void dwc2_set_param_dma_enable(struct dwc2_hsotg *hsotg, int val)
{
int valid = 1;
if (val > 0 && hsotg->hw_params.arch == GHWCFG2_SLAVE_ONLY_ARCH)
valid = 0;
if (val < 0)
valid = 0;
if (!valid) {
if (val >= 0)
dev_err(hsotg->dev,
"%d invalid for dma_enable parameter. Check HW configuration.\n",
val);
val = hsotg->hw_params.arch != GHWCFG2_SLAVE_ONLY_ARCH;
dev_dbg(hsotg->dev, "Setting dma_enable to %d\n", val);
}
hsotg->core_params->dma_enable = val;
}
which seems to hint that DMA support is discoverable. If there is DMA,
why would disable it?
--
balbi
[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 800 bytes --]
[-- Attachment #2: Type: text/plain, Size: 200 bytes --]
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip
^ permalink raw reply
* Re: [REGRESSION] "console: don't prefer first registered if DT specifies stdout-path" breaks console on video outputs of various ARM boards
From: Hans de Goede @ 2016-11-08 9:12 UTC (permalink / raw)
To: Paul Burton
Cc: Linus Torvalds, Andrew Morton, Rob Herring, Frank Rowand,
Thorsten Leemhuis, Greg Kroah-Hartman, Tejun Heo, devicetree,
linux-kernel
In-Reply-To: <3421375.fR4RSn7eD9@np-p-burton>
Hi,
On 07-11-16 18:16, Paul Burton wrote:
> Hi Hans,
>
> On Sunday, 6 November 2016 11:54:35 GMT Hans de Goede wrote:
>>> What I see in my systems, and what 05fd007e4629 ("console: don't prefer
>>> first registered if DT specifies stdout-path") addressed, is that if
>>> there are for example 2 UARTs uart0 & uart1 that are probed in that order
>>> and stdout-path indicates that we should use uart1 we wind up essentially
>>> ignoring it because>
>>> the ordering of the relevant calls goes:
>>> - of_console_check() for uart0
>>> - add_preferred_console() for uart0
>>> - register_console() for uart0
>>> - of_console_check() for uart1
>>> - add_preferred_console() for uart1
>>> - register_console() for uart1
>>>
>>> Since of_check_console() doesn't get called for uart1 until after uart0
>>> has
>>> been probed, we don't add an entry for it to the console_cmdline array
>>> until after register_console() has already decided to enable uart0
>>> because preferred_console == -1.
>>>
>>> I'm not the only one seeing this oddity either, for example see the
>>> discussion on this patch:
>>>
>>> https://patchwork.kernel.org/patch/9263753/
>>>
>>> By simply reverting my patch you restore us to a position where so far as
>>> I
>>> can see we simply do not honor stdout-path for the real kernel console.
>>
>> As said before, we do still honor it, but in your probe example we also get
>> a (second) serial console on uart0, where as you only want one on uart1.
>
> ...but don't we only support one console per type of device? That's what
> Documentation/serial-console.txt says anyway, which means having a console on
> both uart0 & uart1 does not work. I could live with having console output on
> an extra UART, but that's not what I was seeing when I wrote this patch.
Ah yes, you're probably right about that.
>> So I see a few possible solutions here:
>>
>> 1) Do a new version of your patch which changes the "&&
>> !of_specified_console" check to "&& (newcon == tty0 ||
>> !of_specified_console)", then we would still always register tty0 (as long
>> as it gets registered first, just like now) and we would not register uart0
>> in your above example, note the "newcon == tty0" check in my example is
>> pseudo-code. I would be happy to try out such a patch
>>
>> 2) Add a new dt property to enable the new behavior you seek
>>
>> I'm myself tending towards 1 as a better solution: treat tty0 special,
>> because some existing setups rely on it always being registered as a
>> console even if stdout-path is specified and otherwise always honor
>> stdout-path.
>>
>> Regards,
>>
>> Hans
>
> That does feel a little hack-ish to me though... I don't like the reliance on
> probe ordering, nor special casing tty0 in general.
Given that we've just got a "me too" reply from the ppc side of things,
it seems that in reality people have been relying on probe ordering here
for a long time now. IMHO tty0 is special, so it does make sense that it
always gets probed first (*) and it does make sense to handle it special.
*) Even though that seems to be more how things work (an implicit thing)
rather then explicit.
> In any case I don't think I have the time to unpick all this at the moment, so
> I suggest we go ahead with your revert for now & I'll revisit the system I was
> working on when I find the time.
Ok.
Regards,
Hans
^ permalink raw reply
* Re: [PATCH] ARM: tegra: nyan: Mark all USB ports as host
From: Paul Kocialkowski @ 2016-11-08 9:09 UTC (permalink / raw)
To: Peter De Schrijver, Jon Hunter
Cc: Thierry Reding, devicetree-u79uwXL29TY76Z2rM5mHXA, Stephen Warren,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-tegra-u79uwXL29TY76Z2rM5mHXA, Alexandre Courbot,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
In-Reply-To: <20161108085420.GG2478-Rysk9IDjsxmJz7etNGeUX8VPkgjIgRvpAL8bYrjMMd8@public.gmane.org>
[-- Attachment #1: Type: text/plain, Size: 2279 bytes --]
Le mardi 08 novembre 2016 à 10:54 +0200, Peter De Schrijver a écrit :
> On Mon, Nov 07, 2016 at 02:09:31PM +0000, Jon Hunter wrote:
> >
> > On 07/11/16 13:28, Thierry Reding wrote:
> > > * PGP Signed by an unknown key
> > >
> > > On Sun, Sep 18, 2016 at 12:28:52PM +0200, Paul Kocialkowski wrote:
> > > > Nyan boards only have host USB ports (2 external, 1 internal), there is
> > > > no OTG-enabled connector.
> > > >
> > > > Signed-off-by: Paul Kocialkowski <contact-W9ppeneeCTY@public.gmane.org>
> > > > ---
> > > > arch/arm/boot/dts/tegra124-nyan.dtsi | 2 +-
> > > > 1 file changed, 1 insertion(+), 1 deletion(-)
> > >
> > > Where is this information coming from? I don't have one of the Nyans
> > > myself, but one of the Tegra132 devices I have, which I think was
> > > derived from one of the Nyans uses one of the external host ports as
> > > forced recovery port, for which it would need OTG.
> > >
> > > I suspect that the way to get U-Boot onto the Nyans is via tegrarcm?
> > > In that case I think one of the ports must be OTG.
> >
> > It is true that the port on the back on the nyan-big can be used with
> > recovery mode. I was thinking that this is not a true OTG port as it is
> > just a 4-pin type A socket and does not have an ID pin. Thinking some
> > more about this the USB spec does include a "Host Negotiation Protocol
> > (HNP)" that allows a host and device to swap roles and so keeping it as
> > OTG seems valid afterall.
>
> I don't think the bootrom implements that though. I expect recovery mode
> to just program the controller in device mode, without performing any
> negotiation.
That would make sense.
However, if there's a way (even not implemented yet, but a possible way) to have
the kernel configure this port as USB device instead of host dynamically (e.g.
without changing this bit in the dts), then I think it makes sense to keep the
OTG marking and drop this patch.
After all, switching to USB device mode doesn't necessarily have to come from
the ID pin.
--
Paul Kocialkowski, developer of free digital technology at the lower levels
Website: https://www.paulk.fr/
Coding blog: https://code.paulk.fr/
Git repositories: https://git.paulk.fr/ https://git.code.paulk.fr/
[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 801 bytes --]
^ permalink raw reply
* Re: [PATCH] ARM: tegra: nyan: Mark all USB ports as host
From: Peter De Schrijver @ 2016-11-08 8:54 UTC (permalink / raw)
To: Jon Hunter
Cc: devicetree, Stephen Warren, Paul Kocialkowski, linux-kernel,
Thierry Reding, linux-tegra, Alexandre Courbot, linux-arm-kernel
In-Reply-To: <13e7ff98-8bc2-ccf7-94bb-4e1d3c61b20d@nvidia.com>
On Mon, Nov 07, 2016 at 02:09:31PM +0000, Jon Hunter wrote:
>
> On 07/11/16 13:28, Thierry Reding wrote:
> > * PGP Signed by an unknown key
> >
> > On Sun, Sep 18, 2016 at 12:28:52PM +0200, Paul Kocialkowski wrote:
> >> Nyan boards only have host USB ports (2 external, 1 internal), there is
> >> no OTG-enabled connector.
> >>
> >> Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
> >> ---
> >> arch/arm/boot/dts/tegra124-nyan.dtsi | 2 +-
> >> 1 file changed, 1 insertion(+), 1 deletion(-)
> >
> > Where is this information coming from? I don't have one of the Nyans
> > myself, but one of the Tegra132 devices I have, which I think was
> > derived from one of the Nyans uses one of the external host ports as
> > forced recovery port, for which it would need OTG.
> >
> > I suspect that the way to get U-Boot onto the Nyans is via tegrarcm?
> > In that case I think one of the ports must be OTG.
>
> It is true that the port on the back on the nyan-big can be used with
> recovery mode. I was thinking that this is not a true OTG port as it is
> just a 4-pin type A socket and does not have an ID pin. Thinking some
> more about this the USB spec does include a "Host Negotiation Protocol
> (HNP)" that allows a host and device to swap roles and so keeping it as
> OTG seems valid afterall.
I don't think the bootrom implements that though. I expect recovery mode
to just program the controller in device mode, without performing any
negotiation.
Peter.
^ permalink raw reply
* Re: [PATCH 1/6] clk: stm32f4: Add PLL_I2S & PLL_SAI for STM32F429/469 boards
From: Radosław Pietrzyk @ 2016-11-08 8:52 UTC (permalink / raw)
To: Gabriel Fernandez
Cc: Rob Herring, Mark Rutland, Russell King, Maxime Coquelin,
Alexandre Torgue, Michael Turquette, Stephen Boyd, Nicolas Pitre,
Arnd Bergmann, Daniel Thompson, Andrea Merello, devicetree,
amelie.delaunay, kernel, olivier.bideau, linux-kernel, linux-clk,
ludovic.barre, linux-arm-kernel
In-Reply-To: <ebadfacf-73fb-01a6-791a-324daad5e695@st.com>
2016-11-08 9:35 GMT+01:00 Gabriel Fernandez <gabriel.fernandez@st.com>:
> Hi Radosław
>
> Many thanks for reviewing.
>
> On 11/07/2016 03:57 PM, Radosław Pietrzyk wrote:
>>>
>>> +static struct clk_hw *clk_register_pll_div(const char *name,
>>> + const char *parent_name, unsigned long flags,
>>> + void __iomem *reg, u8 shift, u8 width,
>>> + u8 clk_divider_flags, const struct clk_div_table *table,
>>> + struct clk_hw *pll_hw, spinlock_t *lock)
>>> +{
>>> + struct stm32f4_pll_div *pll_div;
>>> + struct clk_hw *hw;
>>> + struct clk_init_data init;
>>> + int ret;
>>> +
>>> + /* allocate the divider */
>>> + pll_div = kzalloc(sizeof(*pll_div), GFP_KERNEL);
>>> + if (!pll_div)
>>> + return ERR_PTR(-ENOMEM);
>>> +
>>> + init.name = name;
>>> + init.ops = &stm32f4_pll_div_ops;
>>> + init.flags = flags;
>>
>> Maybe it's worth to have CLK_SET_RATE_PARENT here and the VCO clock
>> should have CLK_SET_RATE_GATE flag and we can get rid of custom
>> divider ops.
>
> I don't want to offer the possibility to change the vco clock through the
> divisor of the pll (only by a boot-loader or by DT).
>
> e.g. if i make a set rate on lcd-tft clock, i don't want to change the SAI
> frequencies.
>
> I used same structure for internal divisors of the pll (p, q, r) and for
> post divisors (plli2s-q-div, pllsai-q-div & pllsai-r-div).
> That why the CLK_SET_RATE_PARENT flag is transmit by parameter.
>
> These divisors are similar because we have to switch off the pll before
> changing the rate.
>
But changing pll and lcd dividers only may not be enough for getting
very specific pixelclocks and that might require changing the VCO
frequency itself. The rest of the SAI tree should be recalculated
then.
^ permalink raw reply
* Re: [PATCH 1/6] clk: stm32f4: Add PLL_I2S & PLL_SAI for STM32F429/469 boards
From: Gabriel Fernandez @ 2016-11-08 8:35 UTC (permalink / raw)
To: Radosław Pietrzyk
Cc: Rob Herring, Mark Rutland, Russell King, Maxime Coquelin,
Alexandre Torgue, Michael Turquette, Stephen Boyd, Nicolas Pitre,
Arnd Bergmann, Daniel Thompson, Andrea Merello, devicetree,
amelie.delaunay, kernel, olivier.bideau, linux-kernel, linux-clk,
ludovic.barre, linux-arm-kernel
In-Reply-To: <CAFvLkMQxvo=2Ak033n2XkPgdDfU5DLCMF7dj487QFB0e7WceCQ@mail.gmail.com>
Hi Radosław
Many thanks for reviewing.
On 11/07/2016 03:57 PM, Radosław Pietrzyk wrote:
>> +static struct clk_hw *clk_register_pll_div(const char *name,
>> + const char *parent_name, unsigned long flags,
>> + void __iomem *reg, u8 shift, u8 width,
>> + u8 clk_divider_flags, const struct clk_div_table *table,
>> + struct clk_hw *pll_hw, spinlock_t *lock)
>> +{
>> + struct stm32f4_pll_div *pll_div;
>> + struct clk_hw *hw;
>> + struct clk_init_data init;
>> + int ret;
>> +
>> + /* allocate the divider */
>> + pll_div = kzalloc(sizeof(*pll_div), GFP_KERNEL);
>> + if (!pll_div)
>> + return ERR_PTR(-ENOMEM);
>> +
>> + init.name = name;
>> + init.ops = &stm32f4_pll_div_ops;
>> + init.flags = flags;
> Maybe it's worth to have CLK_SET_RATE_PARENT here and the VCO clock
> should have CLK_SET_RATE_GATE flag and we can get rid of custom
> divider ops.
I don't want to offer the possibility to change the vco clock through
the divisor of the pll (only by a boot-loader or by DT).
e.g. if i make a set rate on lcd-tft clock, i don't want to change the
SAI frequencies.
I used same structure for internal divisors of the pll (p, q, r) and for
post divisors (plli2s-q-div, pllsai-q-div & pllsai-r-div).
That why the CLK_SET_RATE_PARENT flag is transmit by parameter.
These divisors are similar because we have to switch off the pll before
changing the rate.
>
>
>> -static void stm32f4_rcc_register_pll(const char *hse_clk, const char *hsi_clk)
>> +
>> +static struct clk_hw *stm32f4_rcc_register_pll(const char *pllsrc,
>> + const struct stm32f4_pll_data *data, spinlock_t *lock)
>> {
>> - unsigned long pllcfgr = readl(base + STM32F4_RCC_PLLCFGR);
>> + struct stm32f4_pll *pll;
>> + struct clk_init_data init = { NULL };
>> + void __iomem *reg;
>> + struct clk_hw *pll_hw;
>> + int ret;
>> +
>> + pll = kzalloc(sizeof(*pll), GFP_KERNEL);
>> + if (!pll)
>> + return ERR_PTR(-ENOMEM);
>> +
>> + init.name = data->vco_name;
>> + init.ops = &stm32f4_pll_gate_ops;
>> + init.flags = CLK_IGNORE_UNUSED;
> CLK_SET_RATE_GATE here
>
> Moreover why not having VCO as a composite clock from gate and mult ?
Yes, that sounds a good idea.
> According to docs SAI VCO (don't know about I2S ) must be within
> certain range so clk_set_rate_range should be somewhere.
^ permalink raw reply
* RE: [PATCH v2 3/3] clocksource: Add clockevent support to NPS400 driver
From: Noam Camus @ 2016-11-08 8:30 UTC (permalink / raw)
To: Daniel Lezcano
Cc: robh+dt@kernel.org, mark.rutland@arm.com, tglx@linutronix.de,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
Vineet Gupta
In-Reply-To: <20161101200141.GF1506@mai>
> From: Daniel Lezcano [mailto:daniel.lezcano@linaro.org]
> Sent: Tuesday, November 1, 2016 10:02 PM
...
>Assuming cpu0 and cpu1 are sibling, does
>taskset 0x1 time sleep 2 & taskset 0x2 time sleep 3
I will use 16,17 instead of 0,1
>give a correct result without a dmesg log ?
[root@192.168.8.2 /]$ [root@192.168.8.2 /]$ taskset 65536 time sleep 2 & taskset 131072 time sleep 3
real 0m 2.54s
user 0m 0.04s
sys 0m 0.14s
real 0m 3.47s
user 0m 0.00s
sys 0m 0.15s
[1]+ Done taskset 65536 time sleep 2
Seem OK to me.
> Can you give the content of the /proc/timer_list ?
[root@192.168.8.2 /]$ cat /proc/timer_list
Timer List Version: v0.8
HRTIMER_MAX_CLOCK_BASES: 4
now at 2421277626774 nsecs
cpu: 0
clock 0:
.base: 9fccb540
.index: 0
.resolution: 1 nsecs
.get_time: ktime_get
.offset: 0 nsecs
active timers:
#0: <9fccb69c>, tick_sched_timer, S:01
# expires at 2421140000000-2421140000000 nsecs [in -137626774 to -137626774 nsecs]
clock 1:
.base: 9fccb560
.index: 1
.resolution: 1 nsecs
.get_time: ktime_get_real
.offset: 0 nsecs
active timers:
clock 2:
.base: 9fccb580
.index: 2
.resolution: 1 nsecs
.get_time: ktime_get_boottime
.offset: 0 nsecs
active timers:
clock 3:
.base: 9fccb5a0
.index: 3
.resolution: 1 nsecs
.get_time: ktime_get_clocktai
.offset: 0 nsecs
active timers:
.expires_next : 2421140000000 nsecs
.hres_active : 1
.nr_events : 615427
.nr_retries : 10052
.nr_hangs : 37
.max_hang_time : 682411010
.nohz_mode : 2
.last_tick : 0 nsecs
.tick_stopped : 0
.idle_jiffies : 0
.idle_calls : 0
.idle_sleeps : 0
.idle_entrytime : 2421131605769 nsecs
.idle_waketime : 0 nsecs
.idle_exittime : 0 nsecs
.idle_sleeptime : 1900903609165 nsecs
.iowait_sleeptime: 0 nsecs
.last_jiffies : 0
.next_timer : 0
.idle_expires : 0 nsecs
jiffies: 212114
cpu: 16
clock 0:
.base: 9fcd7540
.index: 0
.resolution: 1 nsecs
.get_time: ktime_get
.offset: 0 nsecs
active timers:
clock 1:
.base: 9fcd7560
.index: 1
.resolution: 1 nsecs
.get_time: ktime_get_real
.offset: 0 nsecs
active timers:
clock 2:
.base: 9fcd7580
.index: 2
.resolution: 1 nsecs
.get_time: ktime_get_boottime
.offset: 0 nsecs
active timers:
clock 3:
.base: 9fcd75a0
.index: 3
.resolution: 1 nsecs
.get_time: ktime_get_clocktai
.offset: 0 nsecs
active timers:
.expires_next : 9223372036854775807 nsecs
.hres_active : 1
.nr_events : 18
.nr_retries : 1
.nr_hangs : 0
.max_hang_time : 0
.nohz_mode : 2
.last_tick : 2410120000000 nsecs
.tick_stopped : 1
.idle_jiffies : 211017
.idle_calls : 27
.idle_sleeps : 27
.idle_entrytime : 2410189597725 nsecs
.idle_waketime : 2410189342725 nsecs
.idle_exittime : 2410110197721 nsecs
.idle_sleeptime : 2408852044732 nsecs
.iowait_sleeptime: 0 nsecs
.last_jiffies : 211019
.next_timer : 9223372036854775807
.idle_expires : 9223372036854775807 nsecs
jiffies: 212114
cpu: 17
clock 0:
.base: 9fce3540
.index: 0
.resolution: 1 nsecs
.get_time: ktime_get
.offset: 0 nsecs
active timers:
clock 1:
.base: 9fce3560
.index: 1
.resolution: 1 nsecs
.get_time: ktime_get_real
.offset: 0 nsecs
active timers:
clock 2:
.base: 9fce3580
.index: 2
.resolution: 1 nsecs
.get_time: ktime_get_boottime
.offset: 0 nsecs
active timers:
clock 3:
.base: 9fce35a0
.index: 3
.resolution: 1 nsecs
.get_time: ktime_get_clocktai
.offset: 0 nsecs
active timers:
.expires_next : 9223372036854775807 nsecs
.hres_active : 1
.nr_events : 22
.nr_retries : 1
.nr_hangs : 0
.max_hang_time : 0
.nohz_mode : 2
.last_tick : 2412120000000 nsecs
.tick_stopped : 1
.idle_jiffies : 211212
.idle_calls : 32
.idle_sleeps : 32
.idle_entrytime : 2412123353729 nsecs
.idle_waketime : 2412123049733 nsecs
.idle_exittime : 2412110161733 nsecs
.idle_sleeptime : 2410832354720 nsecs
.iowait_sleeptime: 0 nsecs
.last_jiffies : 211213
.next_timer : 9223372036854775807
.idle_expires : 9223372036854775807 nsecs
jiffies: 212114
Tick Device: mode: 1
Per CPU device: 0
Clock Event Device: ARC Timer0
max_delta_ns: 51539607733
min_delta_ns: 1000
mult: 178956970
shift: 31
mode: 3
next_event: 2421140000000 nsecs
set_next_event: arc_clkevent_set_next_event
periodic: arc_clkevent_set_periodic
event_handler: hrtimer_interrupt
retries: 0
Tick Device: mode: 1
Per CPU device: 16
Clock Event Device: ARC Timer0
max_delta_ns: 51539607733
min_delta_ns: 1000
mult: 178956970
shift: 31
mode: 3
next_event: 9223372036854775807 nsecs
set_next_event: arc_clkevent_set_next_event
periodic: arc_clkevent_set_periodic
event_handler: hrtimer_interrupt
retries: 2
Tick Device: mode: 1
Per CPU device: 17
Clock Event Device: ARC Timer0
max_delta_ns: 51539607733
min_delta_ns: 1000
mult: 178956970
shift: 31
mode: 3
next_event: 9223372036854775807 nsecs
set_next_event: arc_clkevent_set_next_event
periodic: arc_clkevent_set_periodic
event_handler: hrtimer_interrupt
retries: 2
-Noam
^ permalink raw reply
* Re: [PATCH] Revert "console: don't prefer first registered if DT specifies stdout-path"
From: Greg Kroah-Hartman @ 2016-11-08 7:00 UTC (permalink / raw)
To: Michael Ellerman
Cc: Linus Torvalds, Hans de Goede, Andrew Morton, Paul Burton,
Rob Herring, Frank Rowand, Thorsten Leemhuis, Tejun Heo,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA
In-Reply-To: <87h97ilrx0.fsf-W0DJWXSxmBNbyGPkN3NxC2scP1bn1w/D@public.gmane.org>
On Tue, Nov 08, 2016 at 11:46:35AM +1100, Michael Ellerman wrote:
> Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org> writes:
>
> > This reverts commit 05fd007e4629 ("console: don't prefer first registered
> > if DT specifies stdout-path").
> >
> > The reverted commit changes existing behavior on which many ARM boards
> > rely. Many ARM small-board-computers, like e.g. the Raspberry Pi have
> > both a video output and a serial console. Depending on whether the user
> > is using the device as a more regular computer; or as a headless device
> > we need to have the console on either one or the other.
> >
> > Many users rely on the kernel behavior of the console being present on
> > both outputs, before the reverted commit the console setup with no
> > console= kernel arguments on an ARM board which sets stdout-path in dt
> > would look like this:
> >
> > [root@localhost ~]# cat /proc/consoles
> > ttyS0 -W- (EC p a) 4:64
> > tty0 -WU (E p ) 4:1
> >
> > Where as after the reverted commit, it looks like this:
> >
> > [root@localhost ~]# cat /proc/consoles
> > ttyS0 -W- (EC p a) 4:64
> >
> > This commit reverts commit 05fd007e4629 ("console: don't prefer first
> > registered if DT specifies stdout-path") restoring the original behavior.
> >
> > Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
>
> This is also breaking various powerpc systems.
>
> Linus can you please merge this revert for 4.9 ?
I'll queue it up with other tty changes for 4.9-final.
thanks,
greg k-h
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply
* RE: [v15, 3/7] powerpc/fsl: move mpc85xx.h to include/linux/fsl
From: Y.B. Lu @ 2016-11-08 6:49 UTC (permalink / raw)
To: Arnd Bergmann
Cc: linuxppc-dev@lists.ozlabs.org, linux-mmc@vger.kernel.org,
ulf.hansson@linaro.org, Scott Wood, Mark Rutland,
Greg Kroah-Hartman, X.B. Xie, M.H. Lian,
linux-i2c@vger.kernel.org, linux-clk@vger.kernel.org, Qiang Zhao,
Russell King, Bhupesh Sharma, Joerg Roedel, Claudiu Manoil,
devicetree@vger.kernel.org, Rob Herring
In-Reply-To: <1543282.vWjeo4ynTa@wuerfel>
Hi Arnd,
> -----Original Message-----
> From: Arnd Bergmann [mailto:arnd@arndb.de]
> Sent: Tuesday, November 08, 2016 5:20 AM
> To: Y.B. Lu
> Cc: linuxppc-dev@lists.ozlabs.org; linux-mmc@vger.kernel.org;
> ulf.hansson@linaro.org; Scott Wood; Mark Rutland; Greg Kroah-Hartman; X.B.
> Xie; M.H. Lian; linux-i2c@vger.kernel.org; linux-clk@vger.kernel.org;
> Qiang Zhao; Russell King; Bhupesh Sharma; Joerg Roedel; Claudiu Manoil;
> devicetree@vger.kernel.org; Rob Herring; Santosh Shilimkar; linux-arm-
> kernel@lists.infradead.org; netdev@vger.kernel.org; linux-
> kernel@vger.kernel.org; Leo Li; iommu@lists.linux-foundation.org; Kumar
> Gala
> Subject: Re: [v15, 3/7] powerpc/fsl: move mpc85xx.h to include/linux/fsl
>
> On Monday, October 31, 2016 9:35:33 AM CET Y.B. Lu wrote:
> > >
> > > I don't see any of the contents of this header referenced by the soc
> > > driver any more. I think you can just drop this patch.
> > >
> >
> > [Lu Yangbo-B47093] This header file was included by guts.c.
> > The guts driver used macro SVR_MAJ/SVR_MIN for calculation.
> >
> > This header file was for powerpc arch before. And this patch is to
> > made it as common header file for both ARM and PPC.
> > Sooner or later this is needed.
>
> Let's discuss it once we actually need the header then, ok?
[Lu Yangbo-B47093] As I said, this header file was included by guts.c in patch 4.
The guts driver used macro SVR_MAJ/SVR_MIN for calculation which were defined in this header file.
Did you suggest we dropped this patch and just calculated them in driver?
Thanks :)
>
> Arnd
^ permalink raw reply
* [PATCH v5 3/3] arm: dts: mt2701: Add node for Mediatek JPEG Decoder
From: Rick Chang @ 2016-11-08 6:34 UTC (permalink / raw)
To: Hans Verkuil, Laurent Pinchart, Mauro Carvalho Chehab,
Matthias Brugger, Rob Herring
Cc: linux-kernel, linux-media, srv_heupstream, linux-mediatek,
linux-arm-kernel, devicetree, Minghsiu Tsai, Rick Chang
In-Reply-To: <1478586880-3923-1-git-send-email-rick.chang@mediatek.com>
Signed-off-by: Rick Chang <rick.chang@mediatek.com>
Signed-off-by: Minghsiu Tsai <minghsiu.tsai@mediatek.com>
---
This patch depends on:
CCF "Add clock support for Mediatek MT2701"[1]
iommu and smi "Add the dtsi node of iommu and smi for mt2701"[2]
[1] http://lists.infradead.org/pipermail/linux-mediatek/2016-October/007271.html
[2] https://patchwork.kernel.org/patch/9164013/
---
arch/arm/boot/dts/mt2701.dtsi | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/arch/arm/boot/dts/mt2701.dtsi b/arch/arm/boot/dts/mt2701.dtsi
index 8f13c70..4dd5048 100644
--- a/arch/arm/boot/dts/mt2701.dtsi
+++ b/arch/arm/boot/dts/mt2701.dtsi
@@ -298,6 +298,20 @@
power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
};
+ jpegdec: jpegdec@15004000 {
+ compatible = "mediatek,mt2701-jpgdec";
+ reg = <0 0x15004000 0 0x1000>;
+ interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&imgsys CLK_IMG_JPGDEC_SMI>,
+ <&imgsys CLK_IMG_JPGDEC>;
+ clock-names = "jpgdec-smi",
+ "jpgdec";
+ power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
+ mediatek,larb = <&larb2>;
+ iommus = <&iommu MT2701_M4U_PORT_JPGDEC_WDMA>,
+ <&iommu MT2701_M4U_PORT_JPGDEC_BSDMA>;
+ };
+
vdecsys: syscon@16000000 {
compatible = "mediatek,mt2701-vdecsys", "syscon";
reg = <0 0x16000000 0 0x1000>;
--
1.9.1
^ permalink raw reply related
* [PATCH v5 2/3] vcodec: mediatek: Add Mediatek JPEG Decoder Driver
From: Rick Chang @ 2016-11-08 6:34 UTC (permalink / raw)
To: Hans Verkuil, Laurent Pinchart, Mauro Carvalho Chehab,
Matthias Brugger, Rob Herring
Cc: linux-kernel, linux-media, srv_heupstream, linux-mediatek,
linux-arm-kernel, devicetree, Minghsiu Tsai, Rick Chang
In-Reply-To: <1478586880-3923-1-git-send-email-rick.chang@mediatek.com>
Add v4l2 driver for Mediatek JPEG Decoder
Signed-off-by: Rick Chang <rick.chang@mediatek.com>
Signed-off-by: Minghsiu Tsai <minghsiu.tsai@mediatek.com>
---
drivers/media/platform/Kconfig | 15 +
drivers/media/platform/Makefile | 2 +
drivers/media/platform/mtk-jpeg/Makefile | 2 +
drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c | 1275 ++++++++++++++++++++++
drivers/media/platform/mtk-jpeg/mtk_jpeg_core.h | 141 +++
drivers/media/platform/mtk-jpeg/mtk_jpeg_hw.c | 417 +++++++
drivers/media/platform/mtk-jpeg/mtk_jpeg_hw.h | 91 ++
drivers/media/platform/mtk-jpeg/mtk_jpeg_parse.c | 160 +++
drivers/media/platform/mtk-jpeg/mtk_jpeg_parse.h | 25 +
drivers/media/platform/mtk-jpeg/mtk_jpeg_reg.h | 58 +
10 files changed, 2186 insertions(+)
create mode 100644 drivers/media/platform/mtk-jpeg/Makefile
create mode 100644 drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c
create mode 100644 drivers/media/platform/mtk-jpeg/mtk_jpeg_core.h
create mode 100644 drivers/media/platform/mtk-jpeg/mtk_jpeg_hw.c
create mode 100644 drivers/media/platform/mtk-jpeg/mtk_jpeg_hw.h
create mode 100644 drivers/media/platform/mtk-jpeg/mtk_jpeg_parse.c
create mode 100644 drivers/media/platform/mtk-jpeg/mtk_jpeg_parse.h
create mode 100644 drivers/media/platform/mtk-jpeg/mtk_jpeg_reg.h
diff --git a/drivers/media/platform/Kconfig b/drivers/media/platform/Kconfig
index 754edbf1..96c9887 100644
--- a/drivers/media/platform/Kconfig
+++ b/drivers/media/platform/Kconfig
@@ -162,6 +162,21 @@ config VIDEO_CODA
Coda is a range of video codec IPs that supports
H.264, MPEG-4, and other video formats.
+config VIDEO_MEDIATEK_JPEG
+ tristate "Mediatek JPEG Codec driver"
+ depends on MTK_IOMMU_V1 || COMPILE_TEST
+ depends on VIDEO_DEV && VIDEO_V4L2
+ depends on ARCH_MEDIATEK || COMPILE_TEST
+ depends on HAS_DMA
+ select VIDEOBUF2_DMA_CONTIG
+ select V4L2_MEM2MEM_DEV
+ ---help---
+ Mediatek jpeg codec driver provides HW capability to decode
+ JPEG format
+
+ To compile this driver as a module, choose M here: the
+ module will be called mtk-jpeg
+
config VIDEO_MEDIATEK_VPU
tristate "Mediatek Video Processor Unit"
depends on VIDEO_DEV && VIDEO_V4L2 && HAS_DMA
diff --git a/drivers/media/platform/Makefile b/drivers/media/platform/Makefile
index f842933..cf701e3 100644
--- a/drivers/media/platform/Makefile
+++ b/drivers/media/platform/Makefile
@@ -68,3 +68,5 @@ obj-$(CONFIG_VIDEO_MEDIATEK_VPU) += mtk-vpu/
obj-$(CONFIG_VIDEO_MEDIATEK_VCODEC) += mtk-vcodec/
obj-$(CONFIG_VIDEO_MEDIATEK_MDP) += mtk-mdp/
+
+obj-$(CONFIG_VIDEO_MEDIATEK_JPEG) += mtk-jpeg/
diff --git a/drivers/media/platform/mtk-jpeg/Makefile b/drivers/media/platform/mtk-jpeg/Makefile
new file mode 100644
index 0000000..b2e6069
--- /dev/null
+++ b/drivers/media/platform/mtk-jpeg/Makefile
@@ -0,0 +1,2 @@
+mtk_jpeg-objs := mtk_jpeg_core.o mtk_jpeg_hw.o mtk_jpeg_parse.o
+obj-$(CONFIG_VIDEO_MEDIATEK_JPEG) += mtk_jpeg.o
diff --git a/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c b/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c
new file mode 100644
index 0000000..33ddf79
--- /dev/null
+++ b/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c
@@ -0,0 +1,1275 @@
+/*
+ * Copyright (c) 2016 MediaTek Inc.
+ * Author: Ming Hsiu Tsai <minghsiu.tsai@mediatek.com>
+ * Rick Chang <rick.chang@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/spinlock.h>
+#include <media/v4l2-event.h>
+#include <media/v4l2-mem2mem.h>
+#include <media/v4l2-ioctl.h>
+#include <media/videobuf2-core.h>
+#include <media/videobuf2-dma-contig.h>
+#include <soc/mediatek/smi.h>
+#include <asm/dma-iommu.h>
+
+#include "mtk_jpeg_hw.h"
+#include "mtk_jpeg_core.h"
+#include "mtk_jpeg_parse.h"
+
+static struct mtk_jpeg_fmt mtk_jpeg_formats[] = {
+ {
+ .name = "JPEG JFIF",
+ .fourcc = V4L2_PIX_FMT_JPEG,
+ .colplanes = 1,
+ .flags = MTK_JPEG_FMT_FLAG_DEC_OUTPUT,
+ },
+ {
+ .name = "YUV 4:2:0 non-contiguous 3-planar, Y/Cb/Cr",
+ .fourcc = V4L2_PIX_FMT_YUV420M,
+ .h_sample = {4, 2, 2},
+ .v_sample = {4, 2, 2},
+ .colplanes = 3,
+ .h_align = 5,
+ .v_align = 4,
+ .flags = MTK_JPEG_FMT_FLAG_DEC_CAPTURE,
+ },
+ {
+ .name = "YUV 4:2:2 non-contiguous 3-planar, Y/Cb/Cr",
+ .fourcc = V4L2_PIX_FMT_YUV422M,
+ .h_sample = {4, 2, 2},
+ .v_sample = {4, 4, 4},
+ .colplanes = 3,
+ .h_align = 5,
+ .v_align = 3,
+ .flags = MTK_JPEG_FMT_FLAG_DEC_CAPTURE,
+ },
+};
+
+#define MTK_JPEG_NUM_FORMATS ARRAY_SIZE(mtk_jpeg_formats)
+
+enum {
+ MTK_JPEG_BUF_FLAGS_INIT = 0,
+ MTK_JPEG_BUF_FLAGS_LAST_FRAME = 1,
+};
+
+struct mtk_jpeg_src_buf {
+ struct vb2_v4l2_buffer b;
+ struct list_head list;
+ int flags;
+ struct mtk_jpeg_dec_param dec_param;
+};
+
+static int debug;
+module_param(debug, int, 0644);
+
+static inline struct mtk_jpeg_ctx *mtk_jpeg_fh_to_ctx(struct v4l2_fh *fh)
+{
+ return container_of(fh, struct mtk_jpeg_ctx, fh);
+}
+
+static inline struct mtk_jpeg_src_buf *mtk_jpeg_vb2_to_srcbuf(
+ struct vb2_buffer *vb)
+{
+ return container_of(to_vb2_v4l2_buffer(vb), struct mtk_jpeg_src_buf, b);
+}
+
+static int mtk_jpeg_querycap(struct file *file, void *priv,
+ struct v4l2_capability *cap)
+{
+ struct mtk_jpeg_dev *jpeg = video_drvdata(file);
+
+ strlcpy(cap->driver, MTK_JPEG_NAME " decoder", sizeof(cap->driver));
+ strlcpy(cap->card, MTK_JPEG_NAME " decoder", sizeof(cap->card));
+ snprintf(cap->bus_info, sizeof(cap->bus_info), "platform:%s",
+ dev_name(jpeg->dev));
+
+ return 0;
+}
+
+static int mtk_jpeg_enum_fmt(struct mtk_jpeg_fmt *mtk_jpeg_formats, int n,
+ struct v4l2_fmtdesc *f, u32 type)
+{
+ int i, num = 0;
+
+ for (i = 0; i < n; ++i) {
+ if (mtk_jpeg_formats[i].flags & type) {
+ if (num == f->index)
+ break;
+ ++num;
+ }
+ }
+
+ if (i >= n)
+ return -EINVAL;
+
+ f->pixelformat = mtk_jpeg_formats[i].fourcc;
+
+ return 0;
+}
+
+static int mtk_jpeg_enum_fmt_vid_cap(struct file *file, void *priv,
+ struct v4l2_fmtdesc *f)
+{
+ return mtk_jpeg_enum_fmt(mtk_jpeg_formats, MTK_JPEG_NUM_FORMATS, f,
+ MTK_JPEG_FMT_FLAG_DEC_CAPTURE);
+}
+
+static int mtk_jpeg_enum_fmt_vid_out(struct file *file, void *priv,
+ struct v4l2_fmtdesc *f)
+{
+ return mtk_jpeg_enum_fmt(mtk_jpeg_formats, MTK_JPEG_NUM_FORMATS, f,
+ MTK_JPEG_FMT_FLAG_DEC_OUTPUT);
+}
+
+static struct mtk_jpeg_q_data *mtk_jpeg_get_q_data(struct mtk_jpeg_ctx *ctx,
+ enum v4l2_buf_type type)
+{
+ if (V4L2_TYPE_IS_OUTPUT(type))
+ return &ctx->out_q;
+ else
+ return &ctx->cap_q;
+}
+
+static struct mtk_jpeg_fmt *mtk_jpeg_find_format(struct mtk_jpeg_ctx *ctx,
+ u32 pixelformat,
+ unsigned int fmt_type)
+{
+ unsigned int k, fmt_flag;
+
+ fmt_flag = (fmt_type == MTK_JPEG_FMT_TYPE_OUTPUT) ?
+ MTK_JPEG_FMT_FLAG_DEC_OUTPUT :
+ MTK_JPEG_FMT_FLAG_DEC_CAPTURE;
+
+ for (k = 0; k < MTK_JPEG_NUM_FORMATS; k++) {
+ struct mtk_jpeg_fmt *fmt = &mtk_jpeg_formats[k];
+
+ if (fmt->fourcc == pixelformat && fmt->flags & fmt_flag)
+ return fmt;
+ }
+
+ return NULL;
+}
+
+static void mtk_jpeg_bound_align_image(u32 *w, unsigned int wmin,
+ unsigned int wmax, unsigned int walign,
+ u32 *h, unsigned int hmin,
+ unsigned int hmax, unsigned int halign)
+{
+ int width, height, w_step, h_step;
+
+ width = *w;
+ height = *h;
+ w_step = 1 << walign;
+ h_step = 1 << halign;
+
+ v4l_bound_align_image(w, wmin, wmax, walign, h, hmin, hmax, halign, 0);
+ if (*w < width && (*w + w_step) <= wmax)
+ *w += w_step;
+ if (*h < height && (*h + h_step) <= hmax)
+ *h += h_step;
+}
+
+static void mtk_jpeg_adjust_fmt_mplane(struct mtk_jpeg_ctx *ctx,
+ struct v4l2_format *f)
+{
+ struct v4l2_pix_format_mplane *pix_mp = &f->fmt.pix_mp;
+ struct mtk_jpeg_q_data *q_data;
+ int i;
+
+ q_data = mtk_jpeg_get_q_data(ctx, f->type);
+
+ pix_mp->width = q_data->w;
+ pix_mp->height = q_data->h;
+ pix_mp->pixelformat = q_data->fmt->fourcc;
+ pix_mp->num_planes = q_data->fmt->colplanes;
+
+ for (i = 0; i < pix_mp->num_planes; i++) {
+ pix_mp->plane_fmt[i].bytesperline = q_data->bytesperline[i];
+ pix_mp->plane_fmt[i].sizeimage = q_data->sizeimage[i];
+ }
+}
+
+static int mtk_jpeg_try_fmt_mplane(struct v4l2_format *f,
+ struct mtk_jpeg_fmt *fmt,
+ struct mtk_jpeg_ctx *ctx, int q_type)
+{
+ struct v4l2_pix_format_mplane *pix_mp = &f->fmt.pix_mp;
+ struct mtk_jpeg_dev *jpeg = ctx->jpeg;
+ int i;
+
+ memset(pix_mp->reserved, 0, sizeof(pix_mp->reserved));
+ pix_mp->field = V4L2_FIELD_NONE;
+
+ if (ctx->state != MTK_JPEG_INIT) {
+ mtk_jpeg_adjust_fmt_mplane(ctx, f);
+ goto end;
+ }
+
+ pix_mp->num_planes = fmt->colplanes;
+ pix_mp->pixelformat = fmt->fourcc;
+
+ if (q_type == MTK_JPEG_FMT_TYPE_OUTPUT) {
+ struct v4l2_plane_pix_format *pfmt = &pix_mp->plane_fmt[0];
+
+ mtk_jpeg_bound_align_image(&pix_mp->width, MTK_JPEG_MIN_WIDTH,
+ MTK_JPEG_MAX_WIDTH, 0,
+ &pix_mp->height, MTK_JPEG_MIN_HEIGHT,
+ MTK_JPEG_MAX_HEIGHT, 0);
+
+ memset(pfmt->reserved, 0, sizeof(pfmt->reserved));
+ pfmt->bytesperline = 0;
+ /* Source size must be aligned to 128 */
+ pfmt->sizeimage = mtk_jpeg_align(pfmt->sizeimage, 128);
+ if (pfmt->sizeimage == 0)
+ pfmt->sizeimage = MTK_JPEG_DEFAULT_SIZEIMAGE;
+ goto end;
+ }
+
+ /* type is MTK_JPEG_FMT_TYPE_CAPTURE */
+ mtk_jpeg_bound_align_image(&pix_mp->width, MTK_JPEG_MIN_WIDTH,
+ MTK_JPEG_MAX_WIDTH, fmt->h_align,
+ &pix_mp->height, MTK_JPEG_MIN_HEIGHT,
+ MTK_JPEG_MAX_HEIGHT, fmt->v_align);
+
+ for (i = 0; i < fmt->colplanes; i++) {
+ struct v4l2_plane_pix_format *pfmt = &pix_mp->plane_fmt[i];
+ u32 stride = pix_mp->width * fmt->h_sample[i] / 4;
+ u32 h = pix_mp->height * fmt->v_sample[i] / 4;
+
+ memset(pfmt->reserved, 0, sizeof(pfmt->reserved));
+ pfmt->bytesperline = stride;
+ pfmt->sizeimage = stride * h;
+ }
+end:
+ v4l2_dbg(2, debug, &jpeg->v4l2_dev, "wxh:%ux%u\n",
+ pix_mp->width, pix_mp->height);
+ for (i = 0; i < pix_mp->num_planes; i++) {
+ v4l2_dbg(2, debug, &jpeg->v4l2_dev,
+ "plane[%d] bpl=%u, size=%u\n",
+ i,
+ pix_mp->plane_fmt[i].bytesperline,
+ pix_mp->plane_fmt[i].sizeimage);
+ }
+ return 0;
+}
+
+static int mtk_jpeg_g_fmt_vid_mplane(struct file *file, void *priv,
+ struct v4l2_format *f)
+{
+ struct vb2_queue *vq;
+ struct mtk_jpeg_q_data *q_data = NULL;
+ struct v4l2_pix_format_mplane *pix_mp = &f->fmt.pix_mp;
+ struct mtk_jpeg_ctx *ctx = mtk_jpeg_fh_to_ctx(priv);
+ struct mtk_jpeg_dev *jpeg = ctx->jpeg;
+ int i;
+
+ vq = v4l2_m2m_get_vq(ctx->fh.m2m_ctx, f->type);
+ if (!vq)
+ return -EINVAL;
+
+ q_data = mtk_jpeg_get_q_data(ctx, f->type);
+
+ memset(pix_mp->reserved, 0, sizeof(pix_mp->reserved));
+ pix_mp->width = q_data->w;
+ pix_mp->height = q_data->h;
+ pix_mp->field = V4L2_FIELD_NONE;
+ pix_mp->pixelformat = q_data->fmt->fourcc;
+ pix_mp->num_planes = q_data->fmt->colplanes;
+ pix_mp->colorspace = ctx->colorspace;
+ pix_mp->ycbcr_enc = ctx->ycbcr_enc;
+ pix_mp->xfer_func = ctx->xfer_func;
+ pix_mp->quantization = ctx->quantization;
+
+ v4l2_dbg(1, debug, &jpeg->v4l2_dev, "(%d) g_fmt:%s wxh:%ux%u\n",
+ f->type, q_data->fmt->name, pix_mp->width, pix_mp->height);
+
+ for (i = 0; i < pix_mp->num_planes; i++) {
+ struct v4l2_plane_pix_format *pfmt = &pix_mp->plane_fmt[i];
+
+ pfmt->bytesperline = q_data->bytesperline[i];
+ pfmt->sizeimage = q_data->sizeimage[i];
+ memset(pfmt->reserved, 0, sizeof(pfmt->reserved));
+
+ v4l2_dbg(1, debug, &jpeg->v4l2_dev,
+ "plane[%d] bpl=%u, size=%u\n",
+ i,
+ pfmt->bytesperline,
+ pfmt->sizeimage);
+ }
+ return 0;
+}
+
+static int mtk_jpeg_try_fmt_vid_cap_mplane(struct file *file, void *priv,
+ struct v4l2_format *f)
+{
+ struct mtk_jpeg_ctx *ctx = mtk_jpeg_fh_to_ctx(priv);
+ struct mtk_jpeg_fmt *fmt;
+
+ fmt = mtk_jpeg_find_format(ctx, f->fmt.pix_mp.pixelformat,
+ MTK_JPEG_FMT_TYPE_CAPTURE);
+ if (!fmt)
+ fmt = ctx->cap_q.fmt;
+
+ v4l2_dbg(2, debug, &ctx->jpeg->v4l2_dev, "(%d) try_fmt:%s\n",
+ f->type, fmt->name);
+
+ return mtk_jpeg_try_fmt_mplane(f, fmt, ctx, MTK_JPEG_FMT_TYPE_CAPTURE);
+}
+
+static int mtk_jpeg_try_fmt_vid_out_mplane(struct file *file, void *priv,
+ struct v4l2_format *f)
+{
+ struct mtk_jpeg_ctx *ctx = mtk_jpeg_fh_to_ctx(priv);
+ struct mtk_jpeg_fmt *fmt;
+
+ fmt = mtk_jpeg_find_format(ctx, f->fmt.pix_mp.pixelformat,
+ MTK_JPEG_FMT_TYPE_OUTPUT);
+ if (!fmt)
+ fmt = ctx->out_q.fmt;
+
+ v4l2_dbg(2, debug, &ctx->jpeg->v4l2_dev, "(%d) try_fmt:%s\n",
+ f->type, fmt->name);
+
+ return mtk_jpeg_try_fmt_mplane(f, fmt, ctx, MTK_JPEG_FMT_TYPE_OUTPUT);
+}
+
+static int mtk_jpeg_s_fmt_mplane(struct mtk_jpeg_ctx *ctx,
+ struct v4l2_format *f)
+{
+ struct vb2_queue *vq;
+ struct mtk_jpeg_q_data *q_data = NULL;
+ struct v4l2_pix_format_mplane *pix_mp = &f->fmt.pix_mp;
+ struct mtk_jpeg_dev *jpeg = ctx->jpeg;
+ unsigned int f_type;
+ int i;
+
+ vq = v4l2_m2m_get_vq(ctx->fh.m2m_ctx, f->type);
+ if (!vq)
+ return -EINVAL;
+
+ q_data = mtk_jpeg_get_q_data(ctx, f->type);
+
+ if (vb2_is_busy(vq)) {
+ v4l2_err(&jpeg->v4l2_dev, "queue busy\n");
+ return -EBUSY;
+ }
+
+ f_type = V4L2_TYPE_IS_OUTPUT(f->type) ?
+ MTK_JPEG_FMT_TYPE_OUTPUT : MTK_JPEG_FMT_TYPE_CAPTURE;
+
+ q_data->fmt = mtk_jpeg_find_format(ctx, pix_mp->pixelformat, f_type);
+ q_data->w = pix_mp->width;
+ q_data->h = pix_mp->height;
+ ctx->colorspace = pix_mp->colorspace;
+ ctx->ycbcr_enc = pix_mp->ycbcr_enc;
+ ctx->xfer_func = pix_mp->xfer_func;
+ ctx->quantization = pix_mp->quantization;
+
+ v4l2_dbg(1, debug, &jpeg->v4l2_dev, "(%d) s_fmt:%s wxh:%ux%u\n",
+ f->type, q_data->fmt->name, q_data->w, q_data->h);
+
+ for (i = 0; i < q_data->fmt->colplanes; i++) {
+ q_data->bytesperline[i] = pix_mp->plane_fmt[i].bytesperline;
+ q_data->sizeimage[i] = pix_mp->plane_fmt[i].sizeimage;
+
+ v4l2_dbg(1, debug, &jpeg->v4l2_dev,
+ "plane[%d] bpl=%u, size=%u\n",
+ i, q_data->bytesperline[i], q_data->sizeimage[i]);
+ }
+
+ return 0;
+}
+
+static int mtk_jpeg_s_fmt_vid_out_mplane(struct file *file, void *priv,
+ struct v4l2_format *f)
+{
+ int ret;
+
+ ret = mtk_jpeg_try_fmt_vid_out_mplane(file, priv, f);
+ if (ret)
+ return ret;
+
+ return mtk_jpeg_s_fmt_mplane(mtk_jpeg_fh_to_ctx(priv), f);
+}
+
+static int mtk_jpeg_s_fmt_vid_cap_mplane(struct file *file, void *priv,
+ struct v4l2_format *f)
+{
+ int ret;
+
+ ret = mtk_jpeg_try_fmt_vid_cap_mplane(file, priv, f);
+ if (ret)
+ return ret;
+
+ return mtk_jpeg_s_fmt_mplane(mtk_jpeg_fh_to_ctx(priv), f);
+}
+
+static void mtk_jpeg_queue_src_chg_event(struct mtk_jpeg_ctx *ctx)
+{
+ static const struct v4l2_event ev_src_ch = {
+ .type = V4L2_EVENT_SOURCE_CHANGE,
+ .u.src_change.changes =
+ V4L2_EVENT_SRC_CH_RESOLUTION,
+ };
+
+ v4l2_event_queue_fh(&ctx->fh, &ev_src_ch);
+}
+
+static int mtk_jpeg_subscribe_event(struct v4l2_fh *fh,
+ const struct v4l2_event_subscription *sub)
+{
+ switch (sub->type) {
+ case V4L2_EVENT_SOURCE_CHANGE:
+ return v4l2_src_change_event_subscribe(fh, sub);
+ default:
+ return -EINVAL;
+ }
+}
+
+static int mtk_jpeg_g_selection(struct file *file, void *priv,
+ struct v4l2_selection *s)
+{
+ struct mtk_jpeg_ctx *ctx = mtk_jpeg_fh_to_ctx(priv);
+
+ if (s->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+ return -EINVAL;
+
+ switch (s->target) {
+ case V4L2_SEL_TGT_COMPOSE:
+ case V4L2_SEL_TGT_COMPOSE_DEFAULT:
+ s->r.width = ctx->out_q.w;
+ s->r.height = ctx->out_q.h;
+ s->r.left = 0;
+ s->r.top = 0;
+ break;
+ case V4L2_SEL_TGT_COMPOSE_BOUNDS:
+ case V4L2_SEL_TGT_COMPOSE_PADDED:
+ s->r.width = ctx->cap_q.w;
+ s->r.height = ctx->cap_q.h;
+ s->r.left = 0;
+ s->r.top = 0;
+ break;
+ default:
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static int mtk_jpeg_s_selection(struct file *file, void *priv,
+ struct v4l2_selection *s)
+{
+ struct mtk_jpeg_ctx *ctx = mtk_jpeg_fh_to_ctx(priv);
+
+ if (s->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+ return -EINVAL;
+
+ switch (s->target) {
+ case V4L2_SEL_TGT_COMPOSE:
+ s->r.left = 0;
+ s->r.top = 0;
+ s->r.width = ctx->out_q.w;
+ s->r.height = ctx->out_q.h;
+ break;
+ default:
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static int mtk_jpeg_qbuf(struct file *file, void *priv, struct v4l2_buffer *buf)
+{
+ struct v4l2_fh *fh = file->private_data;
+ struct vb2_queue *vq;
+ struct vb2_buffer *vb;
+ struct mtk_jpeg_src_buf *jpeg_src_buf;
+
+ if (buf->type != V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE)
+ goto end;
+
+ vq = v4l2_m2m_get_vq(fh->m2m_ctx, buf->type);
+ vb = vq->bufs[buf->index];
+ jpeg_src_buf = mtk_jpeg_vb2_to_srcbuf(vb);
+ jpeg_src_buf->flags = (buf->m.planes[0].bytesused == 0) ?
+ MTK_JPEG_BUF_FLAGS_LAST_FRAME : MTK_JPEG_BUF_FLAGS_INIT;
+end:
+ return v4l2_m2m_qbuf(file, fh->m2m_ctx, buf);
+}
+
+static const struct v4l2_ioctl_ops mtk_jpeg_ioctl_ops = {
+ .vidioc_querycap = mtk_jpeg_querycap,
+ .vidioc_enum_fmt_vid_cap_mplane = mtk_jpeg_enum_fmt_vid_cap,
+ .vidioc_enum_fmt_vid_out_mplane = mtk_jpeg_enum_fmt_vid_out,
+ .vidioc_try_fmt_vid_cap_mplane = mtk_jpeg_try_fmt_vid_cap_mplane,
+ .vidioc_try_fmt_vid_out_mplane = mtk_jpeg_try_fmt_vid_out_mplane,
+ .vidioc_g_fmt_vid_cap_mplane = mtk_jpeg_g_fmt_vid_mplane,
+ .vidioc_g_fmt_vid_out_mplane = mtk_jpeg_g_fmt_vid_mplane,
+ .vidioc_s_fmt_vid_cap_mplane = mtk_jpeg_s_fmt_vid_cap_mplane,
+ .vidioc_s_fmt_vid_out_mplane = mtk_jpeg_s_fmt_vid_out_mplane,
+ .vidioc_qbuf = mtk_jpeg_qbuf,
+ .vidioc_subscribe_event = mtk_jpeg_subscribe_event,
+ .vidioc_g_selection = mtk_jpeg_g_selection,
+ .vidioc_s_selection = mtk_jpeg_s_selection,
+
+ .vidioc_create_bufs = v4l2_m2m_ioctl_create_bufs,
+ .vidioc_prepare_buf = v4l2_m2m_ioctl_prepare_buf,
+ .vidioc_reqbufs = v4l2_m2m_ioctl_reqbufs,
+ .vidioc_querybuf = v4l2_m2m_ioctl_querybuf,
+ .vidioc_dqbuf = v4l2_m2m_ioctl_dqbuf,
+ .vidioc_expbuf = v4l2_m2m_ioctl_expbuf,
+ .vidioc_streamon = v4l2_m2m_ioctl_streamon,
+ .vidioc_streamoff = v4l2_m2m_ioctl_streamoff,
+
+ .vidioc_unsubscribe_event = v4l2_event_unsubscribe,
+};
+
+static int mtk_jpeg_queue_setup(struct vb2_queue *q,
+ unsigned int *num_buffers,
+ unsigned int *num_planes,
+ unsigned int sizes[],
+ struct device *alloc_ctxs[])
+{
+ struct mtk_jpeg_ctx *ctx = vb2_get_drv_priv(q);
+ struct mtk_jpeg_q_data *q_data = NULL;
+ struct mtk_jpeg_dev *jpeg = ctx->jpeg;
+ int i;
+
+ v4l2_dbg(1, debug, &jpeg->v4l2_dev, "(%d) buf_req count=%u\n",
+ q->type, *num_buffers);
+
+ q_data = mtk_jpeg_get_q_data(ctx, q->type);
+ if (!q_data)
+ return -EINVAL;
+
+ *num_planes = q_data->fmt->colplanes;
+ for (i = 0; i < q_data->fmt->colplanes; i++) {
+ sizes[i] = q_data->sizeimage[i];
+ v4l2_dbg(1, debug, &jpeg->v4l2_dev, "sizeimage[%d]=%u\n",
+ i, sizes[i]);
+ }
+
+ return 0;
+}
+
+static int mtk_jpeg_buf_prepare(struct vb2_buffer *vb)
+{
+ struct mtk_jpeg_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue);
+ struct mtk_jpeg_q_data *q_data = NULL;
+ int i;
+
+ q_data = mtk_jpeg_get_q_data(ctx, vb->vb2_queue->type);
+ if (!q_data)
+ return -EINVAL;
+
+ for (i = 0; i < q_data->fmt->colplanes; i++)
+ vb2_set_plane_payload(vb, i, q_data->sizeimage[i]);
+
+ return 0;
+}
+
+static bool mtk_jpeg_check_resolution_change(struct mtk_jpeg_ctx *ctx,
+ struct mtk_jpeg_dec_param *param)
+{
+ struct mtk_jpeg_dev *jpeg = ctx->jpeg;
+ struct mtk_jpeg_q_data *q_data;
+
+ q_data = &ctx->out_q;
+ if (q_data->w != param->pic_w || q_data->h != param->pic_h) {
+ v4l2_dbg(1, debug, &jpeg->v4l2_dev, "Picture size change\n");
+ return true;
+ }
+
+ q_data = &ctx->cap_q;
+ if (q_data->fmt != mtk_jpeg_find_format(ctx, param->dst_fourcc,
+ MTK_JPEG_FMT_TYPE_CAPTURE)) {
+ v4l2_dbg(1, debug, &jpeg->v4l2_dev, "format change\n");
+ return true;
+ }
+ return false;
+}
+
+static void mtk_jpeg_set_queue_data(struct mtk_jpeg_ctx *ctx,
+ struct mtk_jpeg_dec_param *param)
+{
+ struct mtk_jpeg_dev *jpeg = ctx->jpeg;
+ struct mtk_jpeg_q_data *q_data;
+ int i;
+
+ q_data = &ctx->out_q;
+ q_data->w = param->pic_w;
+ q_data->h = param->pic_h;
+
+ q_data = &ctx->cap_q;
+ q_data->w = param->dec_w;
+ q_data->h = param->dec_h;
+ q_data->fmt = mtk_jpeg_find_format(ctx,
+ param->dst_fourcc,
+ MTK_JPEG_FMT_TYPE_CAPTURE);
+
+ for (i = 0; i < q_data->fmt->colplanes; i++) {
+ q_data->bytesperline[i] = param->mem_stride[i];
+ q_data->sizeimage[i] = param->comp_size[i];
+ }
+
+ v4l2_dbg(1, debug, &jpeg->v4l2_dev,
+ "set_parse cap:%s pic(%u, %u), buf(%u, %u)\n",
+ q_data->fmt->name, param->pic_w, param->pic_h,
+ param->dec_w, param->dec_h);
+}
+
+static void mtk_jpeg_buf_queue(struct vb2_buffer *vb)
+{
+ struct mtk_jpeg_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue);
+ struct mtk_jpeg_dec_param *param;
+ struct mtk_jpeg_dev *jpeg = ctx->jpeg;
+ struct mtk_jpeg_src_buf *jpeg_src_buf;
+ bool header_valid;
+
+ v4l2_dbg(2, debug, &jpeg->v4l2_dev, "(%d) buf_q id=%d, vb=%p",
+ vb->vb2_queue->type, vb->index, vb);
+
+ if (vb->vb2_queue->type != V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE)
+ goto end;
+
+ jpeg_src_buf = mtk_jpeg_vb2_to_srcbuf(vb);
+ param = &jpeg_src_buf->dec_param;
+ memset(param, 0, sizeof(*param));
+
+ if (jpeg_src_buf->flags & MTK_JPEG_BUF_FLAGS_LAST_FRAME) {
+ v4l2_dbg(1, debug, &jpeg->v4l2_dev, "Got eos");
+ goto end;
+ }
+ header_valid = mtk_jpeg_parse(param, (u8 *)vb2_plane_vaddr(vb, 0),
+ vb2_get_plane_payload(vb, 0));
+ if (!header_valid) {
+ v4l2_err(&jpeg->v4l2_dev, "Header invalid.\n");
+ vb2_buffer_done(vb, VB2_BUF_STATE_ERROR);
+ return;
+ }
+
+ if (ctx->state == MTK_JPEG_INIT) {
+ mtk_jpeg_queue_src_chg_event(ctx);
+ mtk_jpeg_set_queue_data(ctx, param);
+ ctx->state = MTK_JPEG_RUNNING;
+ }
+end:
+ v4l2_m2m_buf_queue(ctx->fh.m2m_ctx, to_vb2_v4l2_buffer(vb));
+}
+
+static void *mtk_jpeg_buf_remove(struct mtk_jpeg_ctx *ctx,
+ enum v4l2_buf_type type)
+{
+ if (V4L2_TYPE_IS_OUTPUT(type))
+ return v4l2_m2m_src_buf_remove(ctx->fh.m2m_ctx);
+ else
+ return v4l2_m2m_dst_buf_remove(ctx->fh.m2m_ctx);
+}
+
+static int mtk_jpeg_start_streaming(struct vb2_queue *q, unsigned int count)
+{
+ struct mtk_jpeg_ctx *ctx = vb2_get_drv_priv(q);
+ int ret = 0;
+
+ ret = pm_runtime_get_sync(ctx->jpeg->dev);
+
+ return ret > 0 ? 0 : ret;
+}
+
+static void mtk_jpeg_stop_streaming(struct vb2_queue *q)
+{
+ struct mtk_jpeg_ctx *ctx = vb2_get_drv_priv(q);
+ struct vb2_buffer *vb;
+
+ /*
+ * STREAMOFF is an acknowledgment for source change event.
+ * Before STREAMOFF, we still have to return the old resolution and
+ * subsampling. Update capture queue when the stream is off.
+ */
+ if (ctx->state == MTK_JPEG_SOURCE_CHANGE &&
+ !V4L2_TYPE_IS_OUTPUT(q->type)) {
+ struct mtk_jpeg_src_buf *src_buf;
+
+ vb = v4l2_m2m_next_src_buf(ctx->fh.m2m_ctx);
+ src_buf = mtk_jpeg_vb2_to_srcbuf(vb);
+ mtk_jpeg_set_queue_data(ctx, &src_buf->dec_param);
+ ctx->state = MTK_JPEG_RUNNING;
+ } else if (V4L2_TYPE_IS_OUTPUT(q->type)) {
+ ctx->state = MTK_JPEG_INIT;
+ }
+
+ vb = mtk_jpeg_buf_remove(ctx, q->type);
+ while (vb) {
+ v4l2_m2m_buf_done(to_vb2_v4l2_buffer(vb), VB2_BUF_STATE_ERROR);
+ vb = mtk_jpeg_buf_remove(ctx, q->type);
+ }
+
+ pm_runtime_put_sync(ctx->jpeg->dev);
+}
+
+static struct vb2_ops mtk_jpeg_qops = {
+ .queue_setup = mtk_jpeg_queue_setup,
+ .buf_prepare = mtk_jpeg_buf_prepare,
+ .buf_queue = mtk_jpeg_buf_queue,
+ .wait_prepare = vb2_ops_wait_prepare,
+ .wait_finish = vb2_ops_wait_finish,
+ .start_streaming = mtk_jpeg_start_streaming,
+ .stop_streaming = mtk_jpeg_stop_streaming,
+};
+
+static void mtk_jpeg_set_dec_src(struct mtk_jpeg_ctx *ctx,
+ struct vb2_buffer *src_buf,
+ struct mtk_jpeg_bs *bs)
+{
+ bs->str_addr = vb2_dma_contig_plane_dma_addr(src_buf, 0);
+ bs->end_addr = bs->str_addr +
+ mtk_jpeg_align(vb2_get_plane_payload(src_buf, 0), 16);
+ bs->size = mtk_jpeg_align(vb2_plane_size(src_buf, 0), 128);
+}
+
+static int mtk_jpeg_set_dec_dst(struct mtk_jpeg_ctx *ctx,
+ struct mtk_jpeg_dec_param *param,
+ struct vb2_buffer *dst_buf,
+ struct mtk_jpeg_fb *fb)
+{
+ int i;
+
+ if (param->comp_num != dst_buf->num_planes) {
+ dev_err(ctx->jpeg->dev, "plane number mismatch (%u != %u)\n",
+ param->comp_num, dst_buf->num_planes);
+ return -EINVAL;
+ }
+
+ for (i = 0; i < dst_buf->num_planes; i++) {
+ if (vb2_plane_size(dst_buf, i) < param->comp_size[i]) {
+ dev_err(ctx->jpeg->dev,
+ "buffer size is underflow (%lu < %u)\n",
+ vb2_plane_size(dst_buf, 0),
+ param->comp_size[i]);
+ return -EINVAL;
+ }
+ fb->plane_addr[i] = vb2_dma_contig_plane_dma_addr(dst_buf, i);
+ }
+
+ return 0;
+}
+
+static void mtk_jpeg_device_run(void *priv)
+{
+ struct mtk_jpeg_ctx *ctx = priv;
+ struct mtk_jpeg_dev *jpeg = ctx->jpeg;
+ struct vb2_buffer *src_buf, *dst_buf;
+ enum vb2_buffer_state buf_state = VB2_BUF_STATE_ERROR;
+ unsigned long flags;
+ struct mtk_jpeg_src_buf *jpeg_src_buf;
+ struct mtk_jpeg_bs bs;
+ struct mtk_jpeg_fb fb;
+ int i;
+
+ src_buf = v4l2_m2m_next_src_buf(ctx->fh.m2m_ctx);
+ dst_buf = v4l2_m2m_next_dst_buf(ctx->fh.m2m_ctx);
+ jpeg_src_buf = mtk_jpeg_vb2_to_srcbuf(src_buf);
+
+ if (jpeg_src_buf->flags & MTK_JPEG_BUF_FLAGS_LAST_FRAME) {
+ for (i = 0; i < dst_buf->num_planes; i++)
+ vb2_set_plane_payload(dst_buf, i, 0);
+ buf_state = VB2_BUF_STATE_DONE;
+ goto dec_end;
+ }
+
+ if (mtk_jpeg_check_resolution_change(ctx, &jpeg_src_buf->dec_param)) {
+ mtk_jpeg_queue_src_chg_event(ctx);
+ ctx->state = MTK_JPEG_SOURCE_CHANGE;
+ v4l2_m2m_job_finish(jpeg->m2m_dev, ctx->fh.m2m_ctx);
+ return;
+ }
+
+ mtk_jpeg_set_dec_src(ctx, src_buf, &bs);
+ if (mtk_jpeg_set_dec_dst(ctx, &jpeg_src_buf->dec_param, dst_buf, &fb))
+ goto dec_end;
+
+ spin_lock_irqsave(&jpeg->hw_lock, flags);
+ mtk_jpeg_dec_reset(jpeg->dec_reg_base);
+ mtk_jpeg_dec_set_config(jpeg->dec_reg_base,
+ &jpeg_src_buf->dec_param, &bs, &fb);
+
+ mtk_jpeg_dec_start(jpeg->dec_reg_base);
+ spin_unlock_irqrestore(&jpeg->hw_lock, flags);
+ return;
+
+dec_end:
+ v4l2_m2m_src_buf_remove(ctx->fh.m2m_ctx);
+ v4l2_m2m_dst_buf_remove(ctx->fh.m2m_ctx);
+ v4l2_m2m_buf_done(to_vb2_v4l2_buffer(src_buf), buf_state);
+ v4l2_m2m_buf_done(to_vb2_v4l2_buffer(dst_buf), buf_state);
+ v4l2_m2m_job_finish(jpeg->m2m_dev, ctx->fh.m2m_ctx);
+}
+
+static int mtk_jpeg_job_ready(void *priv)
+{
+ struct mtk_jpeg_ctx *ctx = priv;
+
+ return (ctx->state == MTK_JPEG_RUNNING) ? 1 : 0;
+}
+
+static void mtk_jpeg_job_abort(void *priv)
+{
+ struct mtk_jpeg_ctx *ctx = priv;
+ struct mtk_jpeg_dev *jpeg = ctx->jpeg;
+ struct vb2_buffer *src_buf, *dst_buf;
+
+ src_buf = v4l2_m2m_src_buf_remove(ctx->fh.m2m_ctx);
+ dst_buf = v4l2_m2m_dst_buf_remove(ctx->fh.m2m_ctx);
+ v4l2_m2m_buf_done(to_vb2_v4l2_buffer(src_buf), VB2_BUF_STATE_ERROR);
+ v4l2_m2m_buf_done(to_vb2_v4l2_buffer(dst_buf), VB2_BUF_STATE_ERROR);
+ v4l2_m2m_job_finish(jpeg->m2m_dev, ctx->fh.m2m_ctx);
+}
+
+static struct v4l2_m2m_ops mtk_jpeg_m2m_ops = {
+ .device_run = mtk_jpeg_device_run,
+ .job_ready = mtk_jpeg_job_ready,
+ .job_abort = mtk_jpeg_job_abort,
+};
+
+static int mtk_jpeg_queue_init(void *priv, struct vb2_queue *src_vq,
+ struct vb2_queue *dst_vq)
+{
+ struct mtk_jpeg_ctx *ctx = priv;
+ int ret;
+
+ src_vq->type = V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE;
+ src_vq->io_modes = VB2_DMABUF | VB2_MMAP | VB2_USERPTR;
+ src_vq->drv_priv = ctx;
+ src_vq->buf_struct_size = sizeof(struct mtk_jpeg_src_buf);
+ src_vq->ops = &mtk_jpeg_qops;
+ src_vq->mem_ops = &vb2_dma_contig_memops;
+ src_vq->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_COPY;
+ src_vq->lock = &ctx->jpeg->lock;
+ src_vq->dev = ctx->jpeg->dev;
+ ret = vb2_queue_init(src_vq);
+ if (ret)
+ return ret;
+
+ dst_vq->type = V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE;
+ dst_vq->io_modes = VB2_DMABUF | VB2_MMAP | VB2_USERPTR;
+ dst_vq->drv_priv = ctx;
+ dst_vq->buf_struct_size = sizeof(struct v4l2_m2m_buffer);
+ dst_vq->ops = &mtk_jpeg_qops;
+ dst_vq->mem_ops = &vb2_dma_contig_memops;
+ dst_vq->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_COPY;
+ dst_vq->lock = &ctx->jpeg->lock;
+ dst_vq->dev = ctx->jpeg->dev;
+ ret = vb2_queue_init(dst_vq);
+
+ return ret;
+}
+
+static void mtk_jpeg_clk_on(struct mtk_jpeg_dev *jpeg)
+{
+ int ret;
+
+ ret = mtk_smi_larb_get(jpeg->larb);
+ if (ret)
+ dev_err(jpeg->dev, "mtk_smi_larb_get larbvdec fail %d\n", ret);
+ clk_prepare_enable(jpeg->clk_jdec_smi);
+ clk_prepare_enable(jpeg->clk_jdec);
+}
+
+static void mtk_jpeg_clk_off(struct mtk_jpeg_dev *jpeg)
+{
+ clk_disable_unprepare(jpeg->clk_jdec);
+ clk_disable_unprepare(jpeg->clk_jdec_smi);
+ mtk_smi_larb_put(jpeg->larb);
+}
+
+static irqreturn_t mtk_jpeg_dec_irq(int irq, void *priv)
+{
+ struct mtk_jpeg_dev *jpeg = priv;
+ struct mtk_jpeg_ctx *ctx;
+ struct vb2_buffer *src_buf, *dst_buf;
+ struct mtk_jpeg_src_buf *jpeg_src_buf;
+ enum vb2_buffer_state buf_state = VB2_BUF_STATE_ERROR;
+ u32 dec_irq_ret;
+ u32 dec_ret;
+ int i;
+
+ ctx = v4l2_m2m_get_curr_priv(jpeg->m2m_dev);
+ if (!ctx) {
+ v4l2_err(&jpeg->v4l2_dev, "Context is NULL\n");
+ return IRQ_HANDLED;
+ }
+
+ src_buf = v4l2_m2m_src_buf_remove(ctx->fh.m2m_ctx);
+ dst_buf = v4l2_m2m_dst_buf_remove(ctx->fh.m2m_ctx);
+ jpeg_src_buf = mtk_jpeg_vb2_to_srcbuf(src_buf);
+
+ dec_ret = mtk_jpeg_dec_get_int_status(jpeg->dec_reg_base);
+ dec_irq_ret = mtk_jpeg_dec_enum_result(dec_ret);
+
+ if (dec_irq_ret >= MTK_JPEG_DEC_RESULT_UNDERFLOW)
+ mtk_jpeg_dec_reset(jpeg->dec_reg_base);
+
+ if (dec_irq_ret != MTK_JPEG_DEC_RESULT_EOF_DONE) {
+ dev_err(jpeg->dev, "decode failed\n");
+ goto dec_end;
+ }
+
+ for (i = 0; i < dst_buf->num_planes; i++)
+ vb2_set_plane_payload(dst_buf, i,
+ jpeg_src_buf->dec_param.comp_size[i]);
+
+ buf_state = VB2_BUF_STATE_DONE;
+
+dec_end:
+ v4l2_m2m_buf_done(to_vb2_v4l2_buffer(src_buf), buf_state);
+ v4l2_m2m_buf_done(to_vb2_v4l2_buffer(dst_buf), buf_state);
+ v4l2_m2m_job_finish(jpeg->m2m_dev, ctx->fh.m2m_ctx);
+ return IRQ_HANDLED;
+}
+
+static void mtk_jpeg_set_default_params(struct mtk_jpeg_ctx *ctx)
+{
+ struct mtk_jpeg_q_data *q = &ctx->out_q;
+ int i;
+
+ ctx->colorspace = V4L2_COLORSPACE_JPEG,
+ ctx->ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT;
+ ctx->quantization = V4L2_QUANTIZATION_DEFAULT;
+ ctx->xfer_func = V4L2_XFER_FUNC_DEFAULT;
+
+ q->fmt = mtk_jpeg_find_format(ctx, V4L2_PIX_FMT_JPEG,
+ MTK_JPEG_FMT_TYPE_OUTPUT);
+ q->w = MTK_JPEG_MIN_WIDTH;
+ q->h = MTK_JPEG_MIN_HEIGHT;
+ q->bytesperline[0] = 0;
+ q->sizeimage[0] = MTK_JPEG_DEFAULT_SIZEIMAGE;
+
+ q = &ctx->cap_q;
+ q->fmt = mtk_jpeg_find_format(ctx, V4L2_PIX_FMT_YUV420M,
+ MTK_JPEG_FMT_TYPE_CAPTURE);
+ q->w = MTK_JPEG_MIN_WIDTH;
+ q->h = MTK_JPEG_MIN_HEIGHT;
+
+ for (i = 0; i < q->fmt->colplanes; i++) {
+ u32 stride = q->w * q->fmt->h_sample[i] / 4;
+ u32 h = q->h * q->fmt->v_sample[i] / 4;
+
+ q->bytesperline[i] = stride;
+ q->sizeimage[i] = stride * h;
+ }
+}
+
+static int mtk_jpeg_open(struct file *file)
+{
+ struct mtk_jpeg_dev *jpeg = video_drvdata(file);
+ struct video_device *vfd = video_devdata(file);
+ struct mtk_jpeg_ctx *ctx;
+ int ret = 0;
+
+ ctx = kzalloc(sizeof(*ctx), GFP_KERNEL);
+ if (!ctx)
+ return -ENOMEM;
+
+ if (mutex_lock_interruptible(&jpeg->lock)) {
+ ret = -ERESTARTSYS;
+ goto free;
+ }
+
+ v4l2_fh_init(&ctx->fh, vfd);
+ file->private_data = &ctx->fh;
+ v4l2_fh_add(&ctx->fh);
+
+ ctx->jpeg = jpeg;
+ ctx->fh.m2m_ctx = v4l2_m2m_ctx_init(jpeg->m2m_dev, ctx,
+ mtk_jpeg_queue_init);
+ if (IS_ERR(ctx->fh.m2m_ctx)) {
+ ret = PTR_ERR(ctx->fh.m2m_ctx);
+ goto error;
+ }
+
+ mtk_jpeg_set_default_params(ctx);
+ mutex_unlock(&jpeg->lock);
+ return 0;
+
+error:
+ v4l2_fh_del(&ctx->fh);
+ v4l2_fh_exit(&ctx->fh);
+ mutex_unlock(&jpeg->lock);
+free:
+ kfree(ctx);
+ return ret;
+}
+
+static int mtk_jpeg_release(struct file *file)
+{
+ struct mtk_jpeg_dev *jpeg = video_drvdata(file);
+ struct mtk_jpeg_ctx *ctx = mtk_jpeg_fh_to_ctx(file->private_data);
+
+ mutex_lock(&jpeg->lock);
+ v4l2_m2m_ctx_release(ctx->fh.m2m_ctx);
+ v4l2_fh_del(&ctx->fh);
+ v4l2_fh_exit(&ctx->fh);
+ kfree(ctx);
+ mutex_unlock(&jpeg->lock);
+ return 0;
+}
+
+static const struct v4l2_file_operations mtk_jpeg_fops = {
+ .owner = THIS_MODULE,
+ .open = mtk_jpeg_open,
+ .release = mtk_jpeg_release,
+ .poll = v4l2_m2m_fop_poll,
+ .unlocked_ioctl = video_ioctl2,
+ .mmap = v4l2_m2m_fop_mmap,
+};
+
+static int mtk_jpeg_clk_init(struct mtk_jpeg_dev *jpeg)
+{
+ struct device_node *node;
+ struct platform_device *pdev;
+
+ node = of_parse_phandle(jpeg->dev->of_node, "mediatek,larb", 0);
+ if (!node)
+ return -EINVAL;
+ pdev = of_find_device_by_node(node);
+ if (WARN_ON(!pdev)) {
+ of_node_put(node);
+ return -EINVAL;
+ }
+ of_node_put(node);
+
+ jpeg->larb = &pdev->dev;
+
+ jpeg->clk_jdec = devm_clk_get(jpeg->dev, "jpgdec");
+ if (IS_ERR(jpeg->clk_jdec))
+ return -EINVAL;
+
+ jpeg->clk_jdec_smi = devm_clk_get(jpeg->dev, "jpgdec-smi");
+ if (IS_ERR(jpeg->clk_jdec_smi))
+ return -EINVAL;
+
+ return 0;
+}
+
+static int mtk_jpeg_probe(struct platform_device *pdev)
+{
+ struct mtk_jpeg_dev *jpeg;
+ struct resource *res;
+ int dec_irq;
+ int ret;
+
+ jpeg = devm_kzalloc(&pdev->dev, sizeof(*jpeg), GFP_KERNEL);
+ if (!jpeg)
+ return -ENOMEM;
+
+ mutex_init(&jpeg->lock);
+ spin_lock_init(&jpeg->hw_lock);
+ jpeg->dev = &pdev->dev;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ jpeg->dec_reg_base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(jpeg->dec_reg_base)) {
+ ret = PTR_ERR(jpeg->dec_reg_base);
+ return ret;
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ dec_irq = platform_get_irq(pdev, 0);
+ if (!res || dec_irq < 0) {
+ dev_err(&pdev->dev, "Failed to get dec_irq %d.\n", dec_irq);
+ ret = -EINVAL;
+ return ret;
+ }
+
+ ret = devm_request_irq(&pdev->dev, dec_irq, mtk_jpeg_dec_irq, 0,
+ pdev->name, jpeg);
+ if (ret) {
+ dev_err(&pdev->dev, "Failed to request dec_irq %d (%d)\n",
+ dec_irq, ret);
+ ret = -EINVAL;
+ goto err_req_irq;
+ }
+
+ ret = mtk_jpeg_clk_init(jpeg);
+ if (ret) {
+ dev_err(&pdev->dev, "Failed to init clk, err %d\n", ret);
+ goto err_clk_init;
+ }
+
+ ret = v4l2_device_register(&pdev->dev, &jpeg->v4l2_dev);
+ if (ret) {
+ dev_err(&pdev->dev, "Failed to register v4l2 device\n");
+ ret = -EINVAL;
+ goto err_dev_register;
+ }
+
+ jpeg->m2m_dev = v4l2_m2m_init(&mtk_jpeg_m2m_ops);
+ if (IS_ERR(jpeg->m2m_dev)) {
+ v4l2_err(&jpeg->v4l2_dev, "Failed to init mem2mem device\n");
+ ret = PTR_ERR(jpeg->m2m_dev);
+ goto err_m2m_init;
+ }
+
+ jpeg->dec_vdev = video_device_alloc();
+ if (!jpeg->dec_vdev) {
+ ret = -ENOMEM;
+ goto err_dec_vdev_alloc;
+ }
+ snprintf(jpeg->dec_vdev->name, sizeof(jpeg->dec_vdev->name),
+ "%s-dec", MTK_JPEG_NAME);
+ jpeg->dec_vdev->fops = &mtk_jpeg_fops;
+ jpeg->dec_vdev->ioctl_ops = &mtk_jpeg_ioctl_ops;
+ jpeg->dec_vdev->minor = -1;
+ jpeg->dec_vdev->release = video_device_release;
+ jpeg->dec_vdev->lock = &jpeg->lock;
+ jpeg->dec_vdev->v4l2_dev = &jpeg->v4l2_dev;
+ jpeg->dec_vdev->vfl_dir = VFL_DIR_M2M;
+ jpeg->dec_vdev->device_caps = V4L2_CAP_STREAMING |
+ V4L2_CAP_VIDEO_M2M_MPLANE;
+
+ ret = video_register_device(jpeg->dec_vdev, VFL_TYPE_GRABBER, 3);
+ if (ret) {
+ v4l2_err(&jpeg->v4l2_dev, "Failed to register video device\n");
+ goto err_dec_vdev_register;
+ }
+
+ video_set_drvdata(jpeg->dec_vdev, jpeg);
+ v4l2_info(&jpeg->v4l2_dev,
+ "decoder device registered as /dev/video%d (%d,%d)\n",
+ jpeg->dec_vdev->num, VIDEO_MAJOR, jpeg->dec_vdev->minor);
+
+ platform_set_drvdata(pdev, jpeg);
+
+ pm_runtime_enable(&pdev->dev);
+
+ return 0;
+
+err_dec_vdev_register:
+ video_device_release(jpeg->dec_vdev);
+
+err_dec_vdev_alloc:
+ v4l2_m2m_release(jpeg->m2m_dev);
+
+err_m2m_init:
+ v4l2_device_unregister(&jpeg->v4l2_dev);
+
+err_dev_register:
+
+err_clk_init:
+
+err_req_irq:
+
+ return ret;
+}
+
+static int mtk_jpeg_remove(struct platform_device *pdev)
+{
+ struct mtk_jpeg_dev *jpeg = platform_get_drvdata(pdev);
+
+ pm_runtime_disable(&pdev->dev);
+ video_unregister_device(jpeg->dec_vdev);
+ video_device_release(jpeg->dec_vdev);
+ v4l2_m2m_release(jpeg->m2m_dev);
+ v4l2_device_unregister(&jpeg->v4l2_dev);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int mtk_jpeg_pm_suspend(struct device *dev)
+{
+ struct mtk_jpeg_dev *jpeg = dev_get_drvdata(dev);
+
+ mtk_jpeg_dec_reset(jpeg->dec_reg_base);
+ mtk_jpeg_clk_off(jpeg);
+
+ return 0;
+}
+
+static int mtk_jpeg_pm_resume(struct device *dev)
+{
+ struct mtk_jpeg_dev *jpeg = dev_get_drvdata(dev);
+
+ mtk_jpeg_clk_on(jpeg);
+ mtk_jpeg_dec_reset(jpeg->dec_reg_base);
+
+ return 0;
+}
+#endif /* CONFIG_PM */
+
+#ifdef CONFIG_PM_SLEEP
+static int mtk_jpeg_suspend(struct device *dev)
+{
+ int ret;
+
+ if (pm_runtime_suspended(dev))
+ return 0;
+
+ ret = mtk_jpeg_pm_suspend(dev);
+ return ret;
+}
+
+static int mtk_jpeg_resume(struct device *dev)
+{
+ int ret;
+
+ if (pm_runtime_suspended(dev))
+ return 0;
+
+ ret = mtk_jpeg_pm_resume(dev);
+
+ return ret;
+}
+#endif /* CONFIG_PM_SLEEP */
+
+static const struct dev_pm_ops mtk_jpeg_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(mtk_jpeg_suspend, mtk_jpeg_resume)
+ SET_RUNTIME_PM_OPS(mtk_jpeg_pm_suspend, mtk_jpeg_pm_resume, NULL)
+};
+
+static const struct of_device_id mtk_jpeg_match[] = {
+ {
+ .compatible = "mediatek,mt8173-jpgdec",
+ .data = NULL,
+ },
+ {
+ .compatible = "mediatek,mt2701-jpgdec",
+ .data = NULL,
+ },
+ {},
+};
+
+MODULE_DEVICE_TABLE(of, mtk_jpeg_match);
+
+static struct platform_driver mtk_jpeg_driver = {
+ .probe = mtk_jpeg_probe,
+ .remove = mtk_jpeg_remove,
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = MTK_JPEG_NAME,
+ .of_match_table = mtk_jpeg_match,
+ .pm = &mtk_jpeg_pm_ops,
+ },
+};
+
+module_platform_driver(mtk_jpeg_driver);
+
+MODULE_DESCRIPTION("MediaTek JPEG codec driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.h b/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.h
new file mode 100644
index 0000000..d862e3b
--- /dev/null
+++ b/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.h
@@ -0,0 +1,141 @@
+/*
+ * Copyright (c) 2016 MediaTek Inc.
+ * Author: Ming Hsiu Tsai <minghsiu.tsai@mediatek.com>
+ * Rick Chang <rick.chang@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _MTK_JPEG_CORE_H
+#define _MTK_JPEG_CORE_H
+
+#include <linux/interrupt.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-fh.h>
+
+#define MTK_JPEG_NAME "mtk-jpeg"
+
+#define MTK_JPEG_FMT_FLAG_DEC_OUTPUT BIT(0)
+#define MTK_JPEG_FMT_FLAG_DEC_CAPTURE BIT(1)
+
+#define MTK_JPEG_FMT_TYPE_OUTPUT 1
+#define MTK_JPEG_FMT_TYPE_CAPTURE 2
+
+#define MTK_JPEG_MIN_WIDTH 32
+#define MTK_JPEG_MIN_HEIGHT 32
+#define MTK_JPEG_MAX_WIDTH 8192
+#define MTK_JPEG_MAX_HEIGHT 8192
+
+#define MTK_JPEG_DEFAULT_SIZEIMAGE (1 * 1024 * 1024)
+
+enum mtk_jpeg_ctx_state {
+ MTK_JPEG_INIT = 0,
+ MTK_JPEG_RUNNING,
+ MTK_JPEG_SOURCE_CHANGE,
+};
+
+/**
+ * struct mt_jpeg - JPEG IP abstraction
+ * @lock: the mutex protecting this structure
+ * @hw_lock: spinlock protecting the hw device resource
+ * @workqueue: decode work queue
+ * @dev: JPEG device
+ * @v4l2_dev: v4l2 device for mem2mem mode
+ * @m2m_dev: v4l2 mem2mem device data
+ * @alloc_ctx: videobuf2 memory allocator's context
+ * @dec_vdev: video device node for decoder mem2mem mode
+ * @dec_reg_base: JPEG registers mapping
+ * @clk_jdec: JPEG hw working clock
+ * @clk_jdec_smi: JPEG SMI bus clock
+ * @larb: SMI device
+ */
+struct mtk_jpeg_dev {
+ struct mutex lock;
+ spinlock_t hw_lock;
+ struct workqueue_struct *workqueue;
+ struct device *dev;
+ struct v4l2_device v4l2_dev;
+ struct v4l2_m2m_dev *m2m_dev;
+ void *alloc_ctx;
+ struct video_device *dec_vdev;
+ void __iomem *dec_reg_base;
+ struct clk *clk_jdec;
+ struct clk *clk_jdec_smi;
+ struct device *larb;
+};
+
+/**
+ * struct jpeg_fmt - driver's internal color format data
+ * @name: format descritpion
+ * @fourcc: the fourcc code, 0 if not applicable
+ * @h_sample: horizontal sample count of plane in 4 * 4 pixel image
+ * @v_sample: vertical sample count of plane in 4 * 4 pixel image
+ * @colplanes: number of color planes (1 for packed formats)
+ * @h_align: horizontal alignment order (align to 2^h_align)
+ * @v_align: vertical alignment order (align to 2^v_align)
+ * @flags: flags describing format applicability
+ */
+struct mtk_jpeg_fmt {
+ char *name;
+ u32 fourcc;
+ int h_sample[VIDEO_MAX_PLANES];
+ int v_sample[VIDEO_MAX_PLANES];
+ int colplanes;
+ int h_align;
+ int v_align;
+ u32 flags;
+};
+
+/**
+ * mtk_jpeg_q_data - parameters of one queue
+ * @fmt: driver-specific format of this queue
+ * @w: image width
+ * @h: image height
+ * @bytesperline: distance in bytes between the leftmost pixels in two adjacent
+ * lines
+ * @sizeimage: image buffer size in bytes
+ */
+struct mtk_jpeg_q_data {
+ struct mtk_jpeg_fmt *fmt;
+ u32 w;
+ u32 h;
+ u32 bytesperline[VIDEO_MAX_PLANES];
+ u32 sizeimage[VIDEO_MAX_PLANES];
+};
+
+/**
+ * mtk_jpeg_ctx - the device context data
+ * @jpeg: JPEG IP device for this context
+ * @out_q: source (output) queue information
+ * @cap_q: destination (capture) queue queue information
+ * @fh: V4L2 file handle
+ * @dec_param parameters for HW decoding
+ * @state: state of the context
+ * @header_valid: set if header has been parsed and valid
+ * @colorspace: enum v4l2_colorspace; supplemental to pixelformat
+ * @ycbcr_enc: enum v4l2_ycbcr_encoding, Y'CbCr encoding
+ * @quantization: enum v4l2_quantization, colorspace quantization
+ * @xfer_func: enum v4l2_xfer_func, colorspace transfer function
+ */
+struct mtk_jpeg_ctx {
+ struct mtk_jpeg_dev *jpeg;
+ struct mtk_jpeg_q_data out_q;
+ struct mtk_jpeg_q_data cap_q;
+ struct v4l2_fh fh;
+ enum mtk_jpeg_ctx_state state;
+
+ enum v4l2_colorspace colorspace;
+ enum v4l2_ycbcr_encoding ycbcr_enc;
+ enum v4l2_quantization quantization;
+ enum v4l2_xfer_func xfer_func;
+};
+
+#endif /* _MTK_JPEG_CORE_H */
diff --git a/drivers/media/platform/mtk-jpeg/mtk_jpeg_hw.c b/drivers/media/platform/mtk-jpeg/mtk_jpeg_hw.c
new file mode 100644
index 0000000..a6315f3
--- /dev/null
+++ b/drivers/media/platform/mtk-jpeg/mtk_jpeg_hw.c
@@ -0,0 +1,417 @@
+/*
+ * Copyright (c) 2016 MediaTek Inc.
+ * Author: Ming Hsiu Tsai <minghsiu.tsai@mediatek.com>
+ * Rick Chang <rick.chang@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <media/videobuf2-core.h>
+
+#include "mtk_jpeg_hw.h"
+
+#define MTK_JPEG_DUNUM_MASK(val) (((val) - 1) & 0x3)
+
+enum mtk_jpeg_color {
+ MTK_JPEG_COLOR_420 = 0x00221111,
+ MTK_JPEG_COLOR_422 = 0x00211111,
+ MTK_JPEG_COLOR_444 = 0x00111111,
+ MTK_JPEG_COLOR_422V = 0x00121111,
+ MTK_JPEG_COLOR_422X2 = 0x00412121,
+ MTK_JPEG_COLOR_422VX2 = 0x00222121,
+ MTK_JPEG_COLOR_400 = 0x00110000
+};
+
+static inline int mtk_jpeg_verify_align(u32 val, int align, u32 reg)
+{
+ if (val & (align - 1)) {
+ pr_err("mtk-jpeg: write reg %x without %d align\n", reg, align);
+ return -1;
+ }
+
+ return 0;
+}
+
+static int mtk_jpeg_decide_format(struct mtk_jpeg_dec_param *param)
+{
+ param->src_color = (param->sampling_w[0] << 20) |
+ (param->sampling_h[0] << 16) |
+ (param->sampling_w[1] << 12) |
+ (param->sampling_h[1] << 8) |
+ (param->sampling_w[2] << 4) |
+ (param->sampling_h[2]);
+
+ param->uv_brz_w = 0;
+ switch (param->src_color) {
+ case MTK_JPEG_COLOR_444:
+ param->uv_brz_w = 1;
+ param->dst_fourcc = V4L2_PIX_FMT_YUV422M;
+ break;
+ case MTK_JPEG_COLOR_422X2:
+ case MTK_JPEG_COLOR_422:
+ param->dst_fourcc = V4L2_PIX_FMT_YUV422M;
+ break;
+ case MTK_JPEG_COLOR_422V:
+ case MTK_JPEG_COLOR_422VX2:
+ param->uv_brz_w = 1;
+ param->dst_fourcc = V4L2_PIX_FMT_YUV420M;
+ break;
+ case MTK_JPEG_COLOR_420:
+ param->dst_fourcc = V4L2_PIX_FMT_YUV420M;
+ break;
+ case MTK_JPEG_COLOR_400:
+ param->dst_fourcc = V4L2_PIX_FMT_GREY;
+ break;
+ default:
+ param->dst_fourcc = 0;
+ return -1;
+ }
+
+ return 0;
+}
+
+static void mtk_jpeg_calc_mcu(struct mtk_jpeg_dec_param *param)
+{
+ u32 factor_w, factor_h;
+ u32 i, comp, blk;
+
+ factor_w = 2 + param->sampling_w[0];
+ factor_h = 2 + param->sampling_h[0];
+ param->mcu_w = (param->pic_w + (1 << factor_w) - 1) >> factor_w;
+ param->mcu_h = (param->pic_h + (1 << factor_h) - 1) >> factor_h;
+ param->total_mcu = param->mcu_w * param->mcu_h;
+ param->unit_num = ((param->pic_w + 7) >> 3) * ((param->pic_h + 7) >> 3);
+ param->blk_num = 0;
+ for (i = 0; i < MTK_JPEG_COMP_MAX; i++) {
+ param->blk_comp[i] = 0;
+ if (i >= param->comp_num)
+ continue;
+ param->blk_comp[i] = param->sampling_w[i] *
+ param->sampling_h[i];
+ param->blk_num += param->blk_comp[i];
+ }
+
+ param->membership = 0;
+ for (i = 0, blk = 0, comp = 0; i < MTK_JPEG_BLOCK_MAX; i++) {
+ if (i < param->blk_num && comp < param->comp_num) {
+ u32 tmp;
+
+ tmp = (0x04 + (comp & 0x3));
+ param->membership |= tmp << (i * 3);
+ if (++blk == param->blk_comp[comp]) {
+ comp++;
+ blk = 0;
+ }
+ } else {
+ param->membership |= 7 << (i * 3);
+ }
+ }
+}
+
+static void mtk_jpeg_calc_dma_group(struct mtk_jpeg_dec_param *param)
+{
+ u32 factor_mcu = 3;
+
+ if (param->src_color == MTK_JPEG_COLOR_444 &&
+ param->dst_fourcc == V4L2_PIX_FMT_YUV422M)
+ factor_mcu = 4;
+ else if (param->src_color == MTK_JPEG_COLOR_422V &&
+ param->dst_fourcc == V4L2_PIX_FMT_YUV420M)
+ factor_mcu = 4;
+ else if (param->src_color == MTK_JPEG_COLOR_422X2 &&
+ param->dst_fourcc == V4L2_PIX_FMT_YUV422M)
+ factor_mcu = 2;
+ else if (param->src_color == MTK_JPEG_COLOR_400 ||
+ (param->src_color & 0x0FFFF) == 0)
+ factor_mcu = 4;
+
+ param->dma_mcu = 1 << factor_mcu;
+ param->dma_group = param->mcu_w / param->dma_mcu;
+ param->dma_last_mcu = param->mcu_w % param->dma_mcu;
+ if (param->dma_last_mcu)
+ param->dma_group++;
+ else
+ param->dma_last_mcu = param->dma_mcu;
+}
+
+static int mtk_jpeg_calc_dst_size(struct mtk_jpeg_dec_param *param)
+{
+ u32 i, padding_w;
+ u32 ds_row_h[3];
+ u32 brz_w[3];
+
+ brz_w[0] = 0;
+ brz_w[1] = param->uv_brz_w;
+ brz_w[2] = brz_w[1];
+
+ for (i = 0; i < param->comp_num; i++) {
+ if (brz_w[i] > 3)
+ return -1;
+
+ padding_w = param->mcu_w * MTK_JPEG_DCTSIZE *
+ param->sampling_w[i];
+ /* output format is 420/422 */
+ param->comp_w[i] = padding_w >> brz_w[i];
+ param->comp_w[i] = mtk_jpeg_align(param->comp_w[i],
+ MTK_JPEG_DCTSIZE);
+ param->img_stride[i] = i ? mtk_jpeg_align(param->comp_w[i], 16)
+ : mtk_jpeg_align(param->comp_w[i], 32);
+ ds_row_h[i] = (MTK_JPEG_DCTSIZE * param->sampling_h[i]);
+ }
+ param->dec_w = param->img_stride[0];
+ param->dec_h = ds_row_h[0] * param->mcu_h;
+
+ for (i = 0; i < MTK_JPEG_COMP_MAX; i++) {
+ /* They must be equal in frame mode. */
+ param->mem_stride[i] = param->img_stride[i];
+ param->comp_size[i] = param->mem_stride[i] * ds_row_h[i] *
+ param->mcu_h;
+ }
+
+ param->y_size = param->comp_size[0];
+ param->uv_size = param->comp_size[1];
+ param->dec_size = param->y_size + (param->uv_size << 1);
+
+ return 0;
+}
+
+int mtk_jpeg_dec_fill_param(struct mtk_jpeg_dec_param *param)
+{
+ if (mtk_jpeg_decide_format(param))
+ return -1;
+
+ mtk_jpeg_calc_mcu(param);
+ mtk_jpeg_calc_dma_group(param);
+ if (mtk_jpeg_calc_dst_size(param))
+ return -2;
+
+ return 0;
+}
+
+u32 mtk_jpeg_dec_get_int_status(void __iomem *base)
+{
+ u32 ret;
+
+ ret = readl(base + JPGDEC_REG_INTERRUPT_STATUS) & BIT_INQST_MASK_ALLIRQ;
+ if (ret)
+ writel(ret, base + JPGDEC_REG_INTERRUPT_STATUS);
+
+ return ret;
+}
+
+u32 mtk_jpeg_dec_enum_result(u32 irq_result)
+{
+ if (irq_result & BIT_INQST_MASK_EOF)
+ return MTK_JPEG_DEC_RESULT_EOF_DONE;
+ else if (irq_result & BIT_INQST_MASK_PAUSE)
+ return MTK_JPEG_DEC_RESULT_PAUSE;
+ else if (irq_result & BIT_INQST_MASK_UNDERFLOW)
+ return MTK_JPEG_DEC_RESULT_UNDERFLOW;
+ else if (irq_result & BIT_INQST_MASK_OVERFLOW)
+ return MTK_JPEG_DEC_RESULT_OVERFLOW;
+ else if (irq_result & BIT_INQST_MASK_ERROR_BS)
+ return MTK_JPEG_DEC_RESULT_ERROR_BS;
+
+ return MTK_JPEG_DEC_RESULT_ERROR_UNKNOWN;
+}
+
+void mtk_jpeg_dec_start(void __iomem *base)
+{
+ writel(0, base + JPGDEC_REG_TRIG);
+}
+
+static void mtk_jpeg_dec_soft_reset(void __iomem *base)
+{
+ writel(0x0000FFFF, base + JPGDEC_REG_INTERRUPT_STATUS);
+ writel(0x00, base + JPGDEC_REG_RESET);
+ writel(0x01, base + JPGDEC_REG_RESET);
+}
+
+static void mtk_jpeg_dec_hard_reset(void __iomem *base)
+{
+ writel(0x00, base + JPGDEC_REG_RESET);
+ writel(0x10, base + JPGDEC_REG_RESET);
+}
+
+void mtk_jpeg_dec_reset(void __iomem *base)
+{
+ mtk_jpeg_dec_soft_reset(base);
+ mtk_jpeg_dec_hard_reset(base);
+}
+
+static void mtk_jpeg_dec_set_brz_factor(void __iomem *base, u8 yscale_w,
+ u8 yscale_h, u8 uvscale_w, u8 uvscale_h)
+{
+ u32 val;
+
+ val = (uvscale_h << 12) | (uvscale_w << 8) |
+ (yscale_h << 4) | yscale_w;
+ writel(val, base + JPGDEC_REG_BRZ_FACTOR);
+}
+
+static void mtk_jpeg_dec_set_dst_bank0(void __iomem *base, u32 addr_y,
+ u32 addr_u, u32 addr_v)
+{
+ mtk_jpeg_verify_align(addr_y, 16, JPGDEC_REG_DEST_ADDR0_Y);
+ writel(addr_y, base + JPGDEC_REG_DEST_ADDR0_Y);
+ mtk_jpeg_verify_align(addr_u, 16, JPGDEC_REG_DEST_ADDR0_U);
+ writel(addr_u, base + JPGDEC_REG_DEST_ADDR0_U);
+ mtk_jpeg_verify_align(addr_v, 16, JPGDEC_REG_DEST_ADDR0_V);
+ writel(addr_v, base + JPGDEC_REG_DEST_ADDR0_V);
+}
+
+static void mtk_jpeg_dec_set_dst_bank1(void __iomem *base, u32 addr_y,
+ u32 addr_u, u32 addr_v)
+{
+ writel(addr_y, base + JPGDEC_REG_DEST_ADDR1_Y);
+ writel(addr_u, base + JPGDEC_REG_DEST_ADDR1_U);
+ writel(addr_v, base + JPGDEC_REG_DEST_ADDR1_V);
+}
+
+static void mtk_jpeg_dec_set_mem_stride(void __iomem *base, u32 stride_y,
+ u32 stride_uv)
+{
+ writel((stride_y & 0xFFFF), base + JPGDEC_REG_STRIDE_Y);
+ writel((stride_uv & 0xFFFF), base + JPGDEC_REG_STRIDE_UV);
+}
+
+static void mtk_jpeg_dec_set_img_stride(void __iomem *base, u32 stride_y,
+ u32 stride_uv)
+{
+ writel((stride_y & 0xFFFF), base + JPGDEC_REG_IMG_STRIDE_Y);
+ writel((stride_uv & 0xFFFF), base + JPGDEC_REG_IMG_STRIDE_UV);
+}
+
+static void mtk_jpeg_dec_set_pause_mcu_idx(void __iomem *base, u32 idx)
+{
+ writel(idx & 0x0003FFFFFF, base + JPGDEC_REG_PAUSE_MCU_NUM);
+}
+
+static void mtk_jpeg_dec_set_dec_mode(void __iomem *base, u32 mode)
+{
+ writel(mode & 0x03, base + JPGDEC_REG_OPERATION_MODE);
+}
+
+static void mtk_jpeg_dec_set_bs_write_ptr(void __iomem *base, u32 ptr)
+{
+ mtk_jpeg_verify_align(ptr, 16, JPGDEC_REG_FILE_BRP);
+ writel(ptr, base + JPGDEC_REG_FILE_BRP);
+}
+
+static void mtk_jpeg_dec_set_bs_info(void __iomem *base, u32 addr, u32 size)
+{
+ mtk_jpeg_verify_align(addr, 16, JPGDEC_REG_FILE_ADDR);
+ mtk_jpeg_verify_align(size, 128, JPGDEC_REG_FILE_TOTAL_SIZE);
+ writel(addr, base + JPGDEC_REG_FILE_ADDR);
+ writel(size, base + JPGDEC_REG_FILE_TOTAL_SIZE);
+}
+
+static void mtk_jpeg_dec_set_comp_id(void __iomem *base, u32 id_y, u32 id_u,
+ u32 id_v)
+{
+ u32 val;
+
+ val = ((id_y & 0x00FF) << 24) | ((id_u & 0x00FF) << 16) |
+ ((id_v & 0x00FF) << 8);
+ writel(val, base + JPGDEC_REG_COMP_ID);
+}
+
+static void mtk_jpeg_dec_set_total_mcu(void __iomem *base, u32 num)
+{
+ writel(num - 1, base + JPGDEC_REG_TOTAL_MCU_NUM);
+}
+
+static void mtk_jpeg_dec_set_comp0_du(void __iomem *base, u32 num)
+{
+ writel(num - 1, base + JPGDEC_REG_COMP0_DATA_UNIT_NUM);
+}
+
+static void mtk_jpeg_dec_set_du_membership(void __iomem *base, u32 member,
+ u32 gmc, u32 isgray)
+{
+ if (isgray)
+ member = 0x3FFFFFFC;
+ member |= (isgray << 31) | (gmc << 30);
+ writel(member, base + JPGDEC_REG_DU_CTRL);
+}
+
+static void mtk_jpeg_dec_set_q_table(void __iomem *base, u32 id0, u32 id1,
+ u32 id2)
+{
+ u32 val;
+
+ val = ((id0 & 0x0f) << 8) | ((id1 & 0x0f) << 4) | ((id2 & 0x0f) << 0);
+ writel(val, base + JPGDEC_REG_QT_ID);
+}
+
+static void mtk_jpeg_dec_set_dma_group(void __iomem *base, u32 mcu_group,
+ u32 group_num, u32 last_mcu)
+{
+ u32 val;
+
+ val = (((mcu_group - 1) & 0x00FF) << 16) |
+ (((group_num - 1) & 0x007F) << 8) |
+ ((last_mcu - 1) & 0x00FF);
+ writel(val, base + JPGDEC_REG_WDMA_CTRL);
+}
+
+static void mtk_jpeg_dec_set_sampling_factor(void __iomem *base, u32 comp_num,
+ u32 y_w, u32 y_h, u32 u_w,
+ u32 u_h, u32 v_w, u32 v_h)
+{
+ u32 val;
+ u32 y_wh = (MTK_JPEG_DUNUM_MASK(y_w) << 2) | MTK_JPEG_DUNUM_MASK(y_h);
+ u32 u_wh = (MTK_JPEG_DUNUM_MASK(u_w) << 2) | MTK_JPEG_DUNUM_MASK(u_h);
+ u32 v_wh = (MTK_JPEG_DUNUM_MASK(v_w) << 2) | MTK_JPEG_DUNUM_MASK(v_h);
+
+ if (comp_num == 1)
+ val = 0;
+ else
+ val = (y_wh << 8) | (u_wh << 4) | v_wh;
+ writel(val, base + JPGDEC_REG_DU_NUM);
+}
+
+void mtk_jpeg_dec_set_config(void __iomem *base,
+ struct mtk_jpeg_dec_param *config,
+ struct mtk_jpeg_bs *bs,
+ struct mtk_jpeg_fb *fb)
+{
+ mtk_jpeg_dec_set_brz_factor(base, 0, 0, config->uv_brz_w, 0);
+ mtk_jpeg_dec_set_dec_mode(base, 0);
+ mtk_jpeg_dec_set_comp0_du(base, config->unit_num);
+ mtk_jpeg_dec_set_total_mcu(base, config->total_mcu);
+ mtk_jpeg_dec_set_bs_info(base, bs->str_addr, bs->size);
+ mtk_jpeg_dec_set_bs_write_ptr(base, bs->end_addr);
+ mtk_jpeg_dec_set_du_membership(base, config->membership, 1,
+ (config->comp_num == 1) ? 1 : 0);
+ mtk_jpeg_dec_set_comp_id(base, config->comp_id[0], config->comp_id[1],
+ config->comp_id[2]);
+ mtk_jpeg_dec_set_q_table(base, config->qtbl_num[0],
+ config->qtbl_num[1], config->qtbl_num[2]);
+ mtk_jpeg_dec_set_sampling_factor(base, config->comp_num,
+ config->sampling_w[0],
+ config->sampling_h[0],
+ config->sampling_w[1],
+ config->sampling_h[1],
+ config->sampling_w[2],
+ config->sampling_h[2]);
+ mtk_jpeg_dec_set_mem_stride(base, config->mem_stride[0],
+ config->mem_stride[1]);
+ mtk_jpeg_dec_set_img_stride(base, config->img_stride[0],
+ config->img_stride[1]);
+ mtk_jpeg_dec_set_dst_bank0(base, fb->plane_addr[0],
+ fb->plane_addr[1], fb->plane_addr[2]);
+ mtk_jpeg_dec_set_dst_bank1(base, 0, 0, 0);
+ mtk_jpeg_dec_set_dma_group(base, config->dma_mcu, config->dma_group,
+ config->dma_last_mcu);
+ mtk_jpeg_dec_set_pause_mcu_idx(base, config->total_mcu);
+}
diff --git a/drivers/media/platform/mtk-jpeg/mtk_jpeg_hw.h b/drivers/media/platform/mtk-jpeg/mtk_jpeg_hw.h
new file mode 100644
index 0000000..37152a6
--- /dev/null
+++ b/drivers/media/platform/mtk-jpeg/mtk_jpeg_hw.h
@@ -0,0 +1,91 @@
+/*
+ * Copyright (c) 2016 MediaTek Inc.
+ * Author: Ming Hsiu Tsai <minghsiu.tsai@mediatek.com>
+ * Rick Chang <rick.chang@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _MTK_JPEG_HW_H
+#define _MTK_JPEG_HW_H
+
+#include <media/videobuf2-core.h>
+
+#include "mtk_jpeg_core.h"
+#include "mtk_jpeg_reg.h"
+
+enum {
+ MTK_JPEG_DEC_RESULT_EOF_DONE = 0,
+ MTK_JPEG_DEC_RESULT_PAUSE = 1,
+ MTK_JPEG_DEC_RESULT_UNDERFLOW = 2,
+ MTK_JPEG_DEC_RESULT_OVERFLOW = 3,
+ MTK_JPEG_DEC_RESULT_ERROR_BS = 4,
+ MTK_JPEG_DEC_RESULT_ERROR_UNKNOWN = 6
+};
+
+struct mtk_jpeg_dec_param {
+ u32 pic_w;
+ u32 pic_h;
+ u32 dec_w;
+ u32 dec_h;
+ u32 src_color;
+ u32 dst_fourcc;
+ u32 mcu_w;
+ u32 mcu_h;
+ u32 total_mcu;
+ u32 unit_num;
+ u32 comp_num;
+ u32 comp_id[MTK_JPEG_COMP_MAX];
+ u32 sampling_w[MTK_JPEG_COMP_MAX];
+ u32 sampling_h[MTK_JPEG_COMP_MAX];
+ u32 qtbl_num[MTK_JPEG_COMP_MAX];
+ u32 blk_num;
+ u32 blk_comp[MTK_JPEG_COMP_MAX];
+ u32 membership;
+ u32 dma_mcu;
+ u32 dma_group;
+ u32 dma_last_mcu;
+ u32 img_stride[MTK_JPEG_COMP_MAX];
+ u32 mem_stride[MTK_JPEG_COMP_MAX];
+ u32 comp_w[MTK_JPEG_COMP_MAX];
+ u32 comp_size[MTK_JPEG_COMP_MAX];
+ u32 y_size;
+ u32 uv_size;
+ u32 dec_size;
+ u8 uv_brz_w;
+};
+
+static inline u32 mtk_jpeg_align(u32 val, u32 align)
+{
+ return (val + align - 1) & ~(align - 1);
+}
+
+struct mtk_jpeg_bs {
+ dma_addr_t str_addr;
+ dma_addr_t end_addr;
+ size_t size;
+};
+
+struct mtk_jpeg_fb {
+ dma_addr_t plane_addr[MTK_JPEG_COMP_MAX];
+ size_t size;
+};
+
+int mtk_jpeg_dec_fill_param(struct mtk_jpeg_dec_param *param);
+u32 mtk_jpeg_dec_get_int_status(void __iomem *dec_reg_base);
+u32 mtk_jpeg_dec_enum_result(u32 irq_result);
+void mtk_jpeg_dec_set_config(void __iomem *base,
+ struct mtk_jpeg_dec_param *config,
+ struct mtk_jpeg_bs *bs,
+ struct mtk_jpeg_fb *fb);
+void mtk_jpeg_dec_reset(void __iomem *dec_reg_base);
+void mtk_jpeg_dec_start(void __iomem *dec_reg_base);
+
+#endif /* _MTK_JPEG_HW_H */
diff --git a/drivers/media/platform/mtk-jpeg/mtk_jpeg_parse.c b/drivers/media/platform/mtk-jpeg/mtk_jpeg_parse.c
new file mode 100644
index 0000000..3886854
--- /dev/null
+++ b/drivers/media/platform/mtk-jpeg/mtk_jpeg_parse.c
@@ -0,0 +1,160 @@
+/*
+ * Copyright (c) 2016 MediaTek Inc.
+ * Author: Ming Hsiu Tsai <minghsiu.tsai@mediatek.com>
+ * Rick Chang <rick.chang@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/videodev2.h>
+
+#include "mtk_jpeg_parse.h"
+
+#define TEM 0x01
+#define SOF0 0xc0
+#define RST 0xd0
+#define SOI 0xd8
+#define EOI 0xd9
+
+struct mtk_jpeg_stream {
+ u8 *addr;
+ u32 size;
+ u32 curr;
+};
+
+static int read_byte(struct mtk_jpeg_stream *stream)
+{
+ if (stream->curr >= stream->size)
+ return -1;
+ return stream->addr[stream->curr++];
+}
+
+static int read_word_be(struct mtk_jpeg_stream *stream, u32 *word)
+{
+ u32 temp;
+ int byte;
+
+ byte = read_byte(stream);
+ if (byte == -1)
+ return -1;
+ temp = byte << 8;
+ byte = read_byte(stream);
+ if (byte == -1)
+ return -1;
+ *word = (u32)byte | temp;
+
+ return 0;
+}
+
+static void read_skip(struct mtk_jpeg_stream *stream, long len)
+{
+ if (len <= 0)
+ return;
+ while (len--)
+ read_byte(stream);
+}
+
+static bool mtk_jpeg_do_parse(struct mtk_jpeg_dec_param *param, u8 *src_addr_va,
+ u32 src_size)
+{
+ bool notfound = true;
+ struct mtk_jpeg_stream stream;
+
+ stream.addr = src_addr_va;
+ stream.size = src_size;
+ stream.curr = 0;
+
+ while (notfound) {
+ int i, length, byte;
+ u32 word;
+
+ byte = read_byte(&stream);
+ if (byte == -1)
+ return false;
+ if (byte != 0xff)
+ continue;
+ do
+ byte = read_byte(&stream);
+ while (byte == 0xff);
+ if (byte == -1)
+ return false;
+ if (byte == 0)
+ continue;
+
+ length = 0;
+ switch (byte) {
+ case SOF0:
+ /* length */
+ if (read_word_be(&stream, &word))
+ break;
+
+ /* precision */
+ if (read_byte(&stream) == -1)
+ break;
+
+ if (read_word_be(&stream, &word))
+ break;
+ param->pic_h = word;
+
+ if (read_word_be(&stream, &word))
+ break;
+ param->pic_w = word;
+
+ param->comp_num = read_byte(&stream);
+ if (param->comp_num != 1 && param->comp_num != 3)
+ break;
+
+ for (i = 0; i < param->comp_num; i++) {
+ param->comp_id[i] = read_byte(&stream);
+ if (param->comp_id[i] == -1)
+ break;
+
+ /* sampling */
+ byte = read_byte(&stream);
+ if (byte == -1)
+ break;
+ param->sampling_w[i] = (byte >> 4) & 0x0F;
+ param->sampling_h[i] = byte & 0x0F;
+
+ param->qtbl_num[i] = read_byte(&stream);
+ if (param->qtbl_num[i] == -1)
+ break;
+ }
+
+ notfound = !(i == param->comp_num);
+ break;
+ case RST ... RST + 7:
+ case SOI:
+ case EOI:
+ case TEM:
+ break;
+ default:
+ if (read_word_be(&stream, &word))
+ break;
+ length = (long)word - 2;
+ read_skip(&stream, length);
+ break;
+ }
+ }
+
+ return !notfound;
+}
+
+bool mtk_jpeg_parse(struct mtk_jpeg_dec_param *param, u8 *src_addr_va,
+ u32 src_size)
+{
+ if (!mtk_jpeg_do_parse(param, src_addr_va, src_size))
+ return false;
+ if (mtk_jpeg_dec_fill_param(param))
+ return false;
+
+ return true;
+}
diff --git a/drivers/media/platform/mtk-jpeg/mtk_jpeg_parse.h b/drivers/media/platform/mtk-jpeg/mtk_jpeg_parse.h
new file mode 100644
index 0000000..5d92340
--- /dev/null
+++ b/drivers/media/platform/mtk-jpeg/mtk_jpeg_parse.h
@@ -0,0 +1,25 @@
+/*
+ * Copyright (c) 2016 MediaTek Inc.
+ * Author: Ming Hsiu Tsai <minghsiu.tsai@mediatek.com>
+ * Rick Chang <rick.chang@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _MTK_JPEG_PARSE_H
+#define _MTK_JPEG_PARSE_H
+
+#include "mtk_jpeg_hw.h"
+
+bool mtk_jpeg_parse(struct mtk_jpeg_dec_param *param, u8 *src_addr_va,
+ u32 src_size);
+
+#endif /* _MTK_JPEG_PARSE_H */
+
diff --git a/drivers/media/platform/mtk-jpeg/mtk_jpeg_reg.h b/drivers/media/platform/mtk-jpeg/mtk_jpeg_reg.h
new file mode 100644
index 0000000..fc490d6
--- /dev/null
+++ b/drivers/media/platform/mtk-jpeg/mtk_jpeg_reg.h
@@ -0,0 +1,58 @@
+/*
+ * Copyright (c) 2016 MediaTek Inc.
+ * Author: Ming Hsiu Tsai <minghsiu.tsai@mediatek.com>
+ * Rick Chang <rick.chang@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _MTK_JPEG_REG_H
+#define _MTK_JPEG_REG_H
+
+#define MTK_JPEG_COMP_MAX 3
+#define MTK_JPEG_BLOCK_MAX 10
+#define MTK_JPEG_DCTSIZE 8
+
+#define BIT_INQST_MASK_ERROR_BS 0x20
+#define BIT_INQST_MASK_PAUSE 0x10
+#define BIT_INQST_MASK_OVERFLOW 0x04
+#define BIT_INQST_MASK_UNDERFLOW 0x02
+#define BIT_INQST_MASK_EOF 0x01
+#define BIT_INQST_MASK_ALLIRQ 0x37
+
+#define JPGDEC_REG_RESET 0x0090
+#define JPGDEC_REG_BRZ_FACTOR 0x00F8
+#define JPGDEC_REG_DU_NUM 0x00FC
+#define JPGDEC_REG_DEST_ADDR0_Y 0x0140
+#define JPGDEC_REG_DEST_ADDR0_U 0x0144
+#define JPGDEC_REG_DEST_ADDR0_V 0x0148
+#define JPGDEC_REG_DEST_ADDR1_Y 0x014C
+#define JPGDEC_REG_DEST_ADDR1_U 0x0150
+#define JPGDEC_REG_DEST_ADDR1_V 0x0154
+#define JPGDEC_REG_STRIDE_Y 0x0158
+#define JPGDEC_REG_STRIDE_UV 0x015C
+#define JPGDEC_REG_IMG_STRIDE_Y 0x0160
+#define JPGDEC_REG_IMG_STRIDE_UV 0x0164
+#define JPGDEC_REG_WDMA_CTRL 0x016C
+#define JPGDEC_REG_PAUSE_MCU_NUM 0x0170
+#define JPGDEC_REG_OPERATION_MODE 0x017C
+#define JPGDEC_REG_FILE_ADDR 0x0200
+#define JPGDEC_REG_COMP_ID 0x020C
+#define JPGDEC_REG_TOTAL_MCU_NUM 0x0210
+#define JPGDEC_REG_COMP0_DATA_UNIT_NUM 0x0224
+#define JPGDEC_REG_DU_CTRL 0x023C
+#define JPGDEC_REG_TRIG 0x0240
+#define JPGDEC_REG_FILE_BRP 0x0248
+#define JPGDEC_REG_FILE_TOTAL_SIZE 0x024C
+#define JPGDEC_REG_QT_ID 0x0270
+#define JPGDEC_REG_INTERRUPT_STATUS 0x0274
+#define JPGDEC_REG_STATUS 0x0278
+
+#endif /* _MTK_JPEG_REG_H */
--
1.9.1
^ permalink raw reply related
* [PATCH v5 1/3] dt-bindings: mediatek: Add a binding for Mediatek JPEG Decoder
From: Rick Chang @ 2016-11-08 6:34 UTC (permalink / raw)
To: Hans Verkuil, Laurent Pinchart, Mauro Carvalho Chehab,
Matthias Brugger, Rob Herring
Cc: linux-kernel, linux-media, srv_heupstream, linux-mediatek,
linux-arm-kernel, devicetree, Minghsiu Tsai, Rick Chang
In-Reply-To: <1478586880-3923-1-git-send-email-rick.chang@mediatek.com>
Add a DT binding documentation for Mediatek JPEG Decoder of
MT2701 SoC.
Signed-off-by: Rick Chang <rick.chang@mediatek.com>
Signed-off-by: Minghsiu Tsai <minghsiu.tsai@mediatek.com>
---
.../bindings/media/mediatek-jpeg-decoder.txt | 37 ++++++++++++++++++++++
1 file changed, 37 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.txt
diff --git a/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.txt b/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.txt
new file mode 100644
index 0000000..3813947
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.txt
@@ -0,0 +1,37 @@
+* Mediatek JPEG Decoder
+
+Mediatek JPEG Decoder is the JPEG decode hardware present in Mediatek SoCs
+
+Required properties:
+- compatible : must be one of the following string:
+ "mediatek,mt8173-jpgdec"
+ "mediatek,mt2701-jpgdec"
+- reg : physical base address of the jpeg decoder registers and length of
+ memory mapped region.
+- interrupts : interrupt number to the interrupt controller.
+- clocks: device clocks, see
+ Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
+- clock-names: must contain "jpgdec-smi" and "jpgdec".
+- power-domains: a phandle to the power domain, see
+ Documentation/devicetree/bindings/power/power_domain.txt for details.
+- mediatek,larb: must contain the local arbiters in the current Socs, see
+ Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt
+ for details.
+- iommus: should point to the respective IOMMU block with master port as
+ argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.txt
+ for details.
+
+Example:
+ jpegdec: jpegdec@15004000 {
+ compatible = "mediatek,mt2701-jpgdec";
+ reg = <0 0x15004000 0 0x1000>;
+ interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&imgsys CLK_IMG_JPGDEC_SMI>,
+ <&imgsys CLK_IMG_JPGDEC>;
+ clock-names = "jpgdec-smi",
+ "jpgdec";
+ power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
+ mediatek,larb = <&larb2>;
+ iommus = <&iommu MT2701_M4U_PORT_JPGDEC_WDMA>,
+ <&iommu MT2701_M4U_PORT_JPGDEC_BSDMA>;
+ };
--
1.9.1
^ permalink raw reply related
* [PATCH v5 0/3] Add Mediatek JPEG Decoder
From: Rick Chang @ 2016-11-08 6:34 UTC (permalink / raw)
To: Hans Verkuil, Laurent Pinchart, Mauro Carvalho Chehab,
Matthias Brugger, Rob Herring
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA, Minghsiu Tsai, Rick Chang,
srv_heupstream-NuS5LvNUpcJWk0Htik3J/w,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-media-u79uwXL29TY76Z2rM5mHXA
This series of patches provide a v4l2 driver to control Mediatek JPEG decoder
for decoding JPEG image and Motion JPEG bitstream.
changes since v4:
- Change file name of binding documentation
- Revise DT binding documentation
- Revise compatible string
changes since v3:
- Revise DT binding documentation
- Revise compatible string
changes since v2:
- Revise DT binding documentation
changes since v1:
- Rebase for v4.9-rc1.
- Update Compliance test version and result
- Remove redundant path in Makefile
- Fix potential build error without CONFIG_PM_RUNTIME and CONFIG_PM_SLEEP
- Fix warnings from patch check and smatch check
* Dependency
The patch "arm: dts: mt2701: Add node for JPEG decoder" depends on:
CCF "Add clock support for Mediatek MT2701"[1]
iommu and smi "Add the dtsi node of iommu and smi for mt2701"[2]
[1] http://lists.infradead.org/pipermail/linux-mediatek/2016-October/007271.html
[2] https://patchwork.kernel.org/patch/9164013/
* Compliance test
v4l2-compliance SHA : 4ad7174b908a36c4f315e3fe2efa7e2f8a6f375a
Driver Info:
Driver name : mtk-jpeg decode
Card type : mtk-jpeg decoder
Bus info : platform:15004000.jpegdec
Driver version: 4.9.0
Capabilities : 0x84204000
Video Memory-to-Memory Multiplanar
Streaming
Extended Pix Format
Device Capabilities
Device Caps : 0x04204000
Video Memory-to-Memory Multiplanar
Streaming
Extended Pix Format
Compliance test for device /dev/video3 (not using libv4l2):
Required ioctls:
test VIDIOC_QUERYCAP: OK
Allow for multiple opens:
test second video open: OK
test VIDIOC_QUERYCAP: OK
test VIDIOC_G/S_PRIORITY: OK
test for unlimited opens: OK
Debug ioctls:
test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
test VIDIOC_LOG_STATUS: OK (Not Supported)
Input ioctls:
test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
test VIDIOC_ENUMAUDIO: OK (Not Supported)
test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
test VIDIOC_G/S_AUDIO: OK (Not Supported)
Inputs: 0 Audio Inputs: 0 Tuners: 0
Output ioctls:
test VIDIOC_G/S_MODULATOR: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_ENUMAUDOUT: OK (Not Supported)
test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
test VIDIOC_G/S_AUDOUT: OK (Not Supported)
Outputs: 0 Audio Outputs: 0 Modulators: 0
Input/Output configuration ioctls:
test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
test VIDIOC_G/S_EDID: OK (Not Supported)
Control ioctls:
test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK (Not Supported)
test VIDIOC_QUERYCTRL: OK (Not Supported)
test VIDIOC_G/S_CTRL: OK (Not Supported)
test VIDIOC_G/S/TRY_EXT_CTRLS: OK (Not Supported)
test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK (Not Supported)
test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
Standard Controls: 0 Private Controls: 0
Format ioctls:
test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
test VIDIOC_G/S_PARM: OK (Not Supported)
test VIDIOC_G_FBUF: OK (Not Supported)
test VIDIOC_G_FMT: OK
test VIDIOC_TRY_FMT: OK
test VIDIOC_S_FMT: OK
test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
test Cropping: OK (Not Supported)
test Composing: OK
test Scaling: OK
Codec ioctls:
test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
test VIDIOC_G_ENC_INDEX: OK (Not Supported)
test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
Buffer ioctls:
test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
test VIDIOC_EXPBUF: OK
Test input 0:
Total: 43, Succeeded: 43, Failed: 0, Warnings: 0
Rick Chang (3):
dt-bindings: mediatek: Add a binding for Mediatek JPEG Decoder
vcodec: mediatek: Add Mediatek JPEG Decoder Driver
arm: dts: mt2701: Add node for Mediatek JPEG Decoder
.../bindings/media/mediatek-jpeg-decoder.txt | 37 +
arch/arm/boot/dts/mt2701.dtsi | 14 +
drivers/media/platform/Kconfig | 15 +
drivers/media/platform/Makefile | 2 +
drivers/media/platform/mtk-jpeg/Makefile | 2 +
drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c | 1275 ++++++++++++++++++++
drivers/media/platform/mtk-jpeg/mtk_jpeg_core.h | 141 +++
drivers/media/platform/mtk-jpeg/mtk_jpeg_hw.c | 417 +++++++
drivers/media/platform/mtk-jpeg/mtk_jpeg_hw.h | 91 ++
drivers/media/platform/mtk-jpeg/mtk_jpeg_parse.c | 160 +++
drivers/media/platform/mtk-jpeg/mtk_jpeg_parse.h | 25 +
drivers/media/platform/mtk-jpeg/mtk_jpeg_reg.h | 58 +
12 files changed, 2237 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.txt
create mode 100644 drivers/media/platform/mtk-jpeg/Makefile
create mode 100644 drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c
create mode 100644 drivers/media/platform/mtk-jpeg/mtk_jpeg_core.h
create mode 100644 drivers/media/platform/mtk-jpeg/mtk_jpeg_hw.c
create mode 100644 drivers/media/platform/mtk-jpeg/mtk_jpeg_hw.h
create mode 100644 drivers/media/platform/mtk-jpeg/mtk_jpeg_parse.c
create mode 100644 drivers/media/platform/mtk-jpeg/mtk_jpeg_parse.h
create mode 100644 drivers/media/platform/mtk-jpeg/mtk_jpeg_reg.h
--
1.9.1
^ permalink raw reply
* RE: [PATCH V2 1/4] Documentation: pv88080: Move binding document
From: Eric Hyeung Dong Jeong @ 2016-11-08 6:21 UTC (permalink / raw)
To: Rob Herring, Eric Hyeung Dong Jeong
Cc: DEVICETREE, LINUX-KERNEL, Mark Rutland, Alexandre Courbot,
LINUX-GPIO, Lee Jones, Liam Girdwood, Linus Walleij, Mark Brown,
Support Opensource
In-Reply-To: <20161031044403.a34ylc6tpbp2pg7h@rob-hp-laptop>
On Monday, October 31, 2016 1:44 PM, Rob Herring wrote:
> On Thu, Oct 27, 2016 at 10:03:14AM +0900, Eric Jeong wrote:
> >
> > From: Eric Jeong <eric.jeong.opensource-WBD+wuPFNBhBDgjK7y7TUQ@public.gmane.org>
> >
> > The change is to move pv88080 binding document from the regulator
> > directory to mfd binding directory for PV88080 PMIC MFD support.
> >
> >
> > Signed-off-by: Eric Jeong <eric.jeong.opensource-WBD+wuPFNBhBDgjK7y7TUQ@public.gmane.org>
> >
> > ---
> > This patch applies against linux-next and next-20161026
> >
> > Hi,
> >
> > Change since PATCH V1
> > - Patch separated from PATCH V1
> >
> > Regards,
> > Eric Jeong, Dialog Semiconductor Ltd.
> >
> >
> > Documentation/devicetree/bindings/mfd/pv88080.txt | 63
> ++++++++++++++++++++
> > .../devicetree/bindings/regulator/pv88080.txt | 62 -------------------
> > 2 files changed, 63 insertions(+), 62 deletions(-) create mode
> > 100644 Documentation/devicetree/bindings/mfd/pv88080.txt
> > delete mode 100644
> > Documentation/devicetree/bindings/regulator/pv88080.txt
>
> Please resend using git-format-patch -M option.
>
> Rob
Thank you for the comments.
Maybe the document will be updated additionally.
I will send patch again.
Regards
Eric
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply
* RE: [PATCH V2 2/4] mfd: pv88080: MFD core support
From: Eric Hyeung Dong Jeong @ 2016-11-08 6:18 UTC (permalink / raw)
To: Linus Walleij, Eric Hyeung Dong Jeong
Cc: LINUX-KERNEL, Lee Jones, Alexandre Courbot, DEVICETREE,
LINUX-GPIO, Liam Girdwood, Mark Brown, Mark Rutland, Rob Herring,
Support Opensource
In-Reply-To: <CACRpkdZMhtiyk1iyBE-j7rAS6yhSCBsa57-VMnyL=tsUi9wQZg@mail.gmail.com>
On Friday, October 28, 2016 9:18 PM, Linus Walleij wrote:
> On Thu, Oct 27, 2016 at 3:03 AM, Eric Jeong
> <eric.jeong.opensource@diasemi.com> wrote:
>
> > +++ b/drivers/mfd/pv88080-i2c.c
> > +
> > +static const struct of_device_id pv88080_of_match_table[] = {
> > + { .compatible = "pvs,pv88080", .data = (void *)TYPE_PV88080_AA },
> > + { .compatible = "pvs,pv88080-aa", .data = (void *)TYPE_PV88080_AA },
> > + { .compatible = "pvs,pv88080-ba", .data = (void *)TYPE_PV88080_BA },
> > + { },
> > +};
> > +MODULE_DEVICE_TABLE(of, pv88080_of_match_table);
>
> Actually you are doing something weird.
>
> The only thing you put in your device tree is this I guess.
>
> That means that the GPIO chip does *not* have a device tree entry, so you
> cannot reference the GPIOs there with &phandle notation.
>
> Please look around a bit to see how other OF-MFDs do it: they register and
> populate by struct mfd_cell using the .of_compatible member so that
> subdevices get their own DT nodes, which is necessary for nodes providing
> resources such as GPIOs, regulators and clocks, lest you cannot reference them
> in your device tree!
>
> Therefore I think all your subdevices should instantiate from device tree with
> compatible matching as well, not as platform devices.
>
> > +struct pv88080_pdata {
> > + int (*init)(struct pv88080 *pv88080);
> > + int irq_base;
> > + int gpio_base;
>
> NAK.
>
> Get irq from the device tree, assign gpio base dynamically.
>
> > + struct regulator_init_data
> > + *regulators[PV88080_MAX_REGULATORS];
>
> I suspect also this should come from the device tree.
>
> Yours,
> Linus Walleij
Thank you for the comments.
I will send patch again.
Regards
Eric
^ permalink raw reply
* RE: [PATCH V2 4/4] gpio: pv88080: Add GPIO function support
From: Eric Hyeung Dong Jeong @ 2016-11-08 6:15 UTC (permalink / raw)
To: Linus Walleij, Eric Hyeung Dong Jeong
Cc: Alexandre Courbot, LINUX-GPIO, LINUX-KERNEL, DEVICETREE,
Lee Jones, Liam Girdwood, Mark Brown, Mark Rutland, Rob Herring,
Support Opensource
In-Reply-To: <CACRpkdYW_LnT9zLQp=r8xE1o=_hfwGEhOu_w2bp+hRZNN29WLA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
On Friday, October 28, 2016 9:11 PM, Linux Walleij wrote:
> On Thu, Oct 27, 2016 at 3:03 AM, Eric Jeong
> <eric.jeong.opensource@diasemi.com> wrote:
>
> > From: Eric Jeong <eric.jeong.opensource@diasemi.com>
> >
> > This patch adds support for PV88080 PMIC GPIOs.
> > PV88080 has two configurable GPIOs.
> >
> > Kconfig and Makefile are updated to reflect support for PV88080 PMIC
> > GPIO.
> >
> > Signed-off-by: Eric Jeong <eric.jeong.opensource@diasemi.com>
> (...)
>
> > +static int pv88080_gpio_direction_input(struct gpio_chip *gc,
> > + unsigned int offset) {
> > + struct pv88080_gpio *priv = gpiochip_get_data(gc);
> > + struct pv88080 *chip = priv->chip;
> > + int ret;
> > +
> > + /* Set the initial value */
> > + ret = regmap_update_bits(chip->regmap, priv->gpio_base_reg + offset,
> > + PV88080_GPIO_OUTPUT_MASK, 0);
> > + if (ret)
> > + return ret;
>
> So you set the initial value when we change the pin to *input*...
>
> > +
> > + return regmap_update_bits(chip->regmap, priv->gpio_base_reg + offset,
> > + PV88080_GPIO_DIRECTION_MASK, 0); }
> > +
> > +static int pv88080_gpio_direction_output(struct gpio_chip *gc,
> > + unsigned int offset, int value) {
> > + struct pv88080_gpio *priv = gpiochip_get_data(gc);
> > + struct pv88080 *chip = priv->chip;
> > + int ret;
> > +
> > + ret = regmap_update_bits(chip->regmap, priv->gpio_base_reg + offset,
> > + PV88080_GPIO_DIRECTION_MASK,
> > + PV88080_GPIO_DIRECTION_MASK);
>
> But do nothing when we change the pin to *output*?
>
> It seems like you switched the two function implementations or something?
>
> > +static int pv88080_gpio_get(struct gpio_chip *gc, unsigned int
> > +offset) {
> > + struct pv88080_gpio *priv = gpiochip_get_data(gc);
> > + struct pv88080 *chip = priv->chip;
> > + unsigned int reg = 0, direction;
> > + int ret;
> > +
> > + ret = regmap_read(chip->regmap, priv->gpio_base_reg + offset, ®);
> > + if (ret)
> > + return ret;
> > +
> > + direction = (reg & PV88080_GPIO_DIRECTION_MASK);
> > + if (direction == PV88080_PORT_DIRECTION_OUTPUT) {
> > + if (reg & PV88080_GPIO_OUTPUT_EN)
> > + return 1;
> > + ret = 0;
> > + } else {
> > + ret = regmap_read(chip->regmap, priv->input_reg, ®);
> > + if (ret < 0)
> > + return ret;
> > + ret = (reg & (PV88080_GPIO_INPUT_MASK << offset)) >>
> > + offset;
>
> Isn't this what you want to do?
>
> #include <linux/bitops.h>
>
> ret = !!(reg & BIT(offset));
>
> The mask is 0x01. No point in making things more complicated than they are.
>
>
> > +static void pv88080_gpio_set(struct gpio_chip *gc, unsigned int offset,
> > + int value) {
> > + struct pv88080_gpio *priv = gpiochip_get_data(gc);
> > + struct pv88080 *chip = priv->chip;
> > +
> > + if (value)
> > + regmap_update_bits(chip->regmap, priv->gpio_base_reg + offset,
> > + PV88080_GPIO_OUTPUT_MASK,
> > + PV88080_GPIO_OUTPUT_EN);
> > + else
> > + regmap_update_bits(chip->regmap, priv->gpio_base_reg + offset,
> > + PV88080_GPIO_OUTPUT_MASK,
> > + PV88080_GPIO_OUTPUT_DIS); }
>
> Looks good, output is more complicated.
>
> > +static const struct gpio_chip template_gpio = {
> > + .label = "pv88080-gpio",
> > + .owner = THIS_MODULE,
> > + .get_direction = pv88080_gpio_get_direction,
> > + .direction_input = pv88080_gpio_direction_input,
> > + .direction_output = pv88080_gpio_direction_output,
> > + .get = pv88080_gpio_get,
> > + .set = pv88080_gpio_set,
> > + .base = -1,
> > + .ngpio = DEFAULT_PIN_NUMBER,
> > +};
>
> Why even have a #define for DEFAULT_PIN_NUMBER?
> Just hardcode it here.
>
> > + priv->chip = chip;
> > + priv->gpio_chip = template_gpio;
> > + priv->gpio_chip.parent = chip->dev;
>
> I slightly prefer that you fill in the priv->gpio_chip with code (one assignment
> per line) rather than assigning a template like here, but it's your pick.
>
> > + if (pdata && pdata->gpio_base)
> > + priv->gpio_chip.base = pdata->gpio_base;
>
> Give me any good reason to support this. Please just drop this platform data.
> Use -1 like in the template and get dynamic assignment of GPIO numbers.
>
> Yours,
> Linus Walleij
Thank you for the comments and recommendation.
I will try to updated the code like your recommendation and make it simple. Then, I will send patch again.
Regards
Eric
^ permalink raw reply
* Re: [PATCH V5 3/3] ARM64 LPC: LPC driver implementation on Hip06
From: kbuild test robot @ 2016-11-08 6:11 UTC (permalink / raw)
Cc: kbuild-all, catalin.marinas, will.deacon, robh+dt, bhelgaas,
mark.rutland, olof, arnd, linux-arm-kernel, lorenzo.pieralisi,
linux-kernel, linuxarm, devicetree, linux-pci, linux-serial,
minyard, benh, liviu.dudau, zourongrong, john.garry,
gabriele.paoloni, zhichang.yuan02, kantyzc, xuwei5, zhichang.yuan
In-Reply-To: <1478576829-112707-4-git-send-email-yuanzhichang@hisilicon.com>
[-- Attachment #1: Type: text/plain, Size: 2241 bytes --]
Hi zhichang.yuan,
[auto build test WARNING on arm64/for-next/core]
[also build test WARNING on v4.9-rc4 next-20161028]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]
url: https://github.com/0day-ci/linux/commits/zhichang-yuan/ARM64-LPC-legacy-ISA-I-O-support/20161108-114742
base: https://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux.git for-next/core
config: arm64-allmodconfig (attached as .config)
compiler: aarch64-linux-gnu-gcc (Debian 6.1.1-9) 6.1.1 20160705
reproduce:
wget https://git.kernel.org/cgit/linux/kernel/git/wfg/lkp-tests.git/plain/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# save the attached .config to linux build tree
make.cross ARCH=arm64
All warnings (new ones prefixed by >>):
drivers/bus/hisi_lpc.c: In function 'hisilpc_probe':
>> drivers/bus/hisi_lpc.c:439:45: warning: format '%d' expects argument of type 'int', but argument 3 has type 'long int' [-Wformat=]
dev_err(&pdev->dev, "ioremap memory FAIL(%d)!\n",
^
vim +439 drivers/bus/hisi_lpc.c
423 {
424 struct resource *iores;
425 struct hisilpc_dev *lpcdev;
426 int ret;
427
428 dev_info(&pdev->dev, "probing hslpc...\n");
429
430 lpcdev = devm_kzalloc(&pdev->dev,
431 sizeof(struct hisilpc_dev), GFP_KERNEL);
432 if (!lpcdev)
433 return -ENOMEM;
434
435 spin_lock_init(&lpcdev->cycle_lock);
436 iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
437 lpcdev->membase = devm_ioremap_resource(&pdev->dev, iores);
438 if (IS_ERR(lpcdev->membase)) {
> 439 dev_err(&pdev->dev, "ioremap memory FAIL(%d)!\n",
440 PTR_ERR(lpcdev->membase));
441 return PTR_ERR(lpcdev->membase);
442 }
443 /*
444 * The first PCIBIOS_MIN_IO is reserved specifically for indirectIO.
445 * It will separate indirectIO range from pci host bridge to
446 * avoid the possible PIO conflict.
447 * Set the indirectIO range directly here.
---
0-DAY kernel test infrastructure Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all Intel Corporation
[-- Attachment #2: .config.gz --]
[-- Type: application/gzip, Size: 51464 bytes --]
^ permalink raw reply
* [PATCH 4/4] dts: arm64: enable mmc3 for supporting sdio feature
From: Yong Mao @ 2016-11-08 6:09 UTC (permalink / raw)
To: Ulf Hansson
Cc: Mark Rutland, devicetree, YH Huang, Nicolas Boichat,
Mathias Nyman, srv_heupstream, Catalin Marinas, linux-mediatek,
Will Deacon, Douglas Anderson, yong mao, linux-kernel,
Chunfeng Yun, Rob Herring, Geert Uytterhoeven, linux-arm-kernel,
Philipp Zabel, Matthias Brugger, linux-mmc, Eddie Huang,
Chaotian Jing
In-Reply-To: <1478585341-6749-1-git-send-email-yong.mao@mediatek.com>
From: yong mao <yong.mao@mediatek.com>
Add description of mmc3 for supporting sdio feature
Signed-off-by: Yong Mao <yong.mao@mediatek.com>
Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
---
arch/arm64/boot/dts/mediatek/mt8173-evb.dts | 82 +++++++++++++++++++++++++++
1 file changed, 82 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
index 2a7f731..4dbd299 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
@@ -43,6 +43,14 @@
enable-active-high;
};
+ sdio_fixed_3v3: fixedregulator@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&pio 85 GPIO_ACTIVE_HIGH>;
+ };
+
connector {
compatible = "hdmi-connector";
label = "hdmi";
@@ -139,6 +147,25 @@
vqmmc-supply = <&mt6397_vmc_reg>;
};
+&mmc3 {
+ status = "okay";
+ pinctrl-names = "default", "state_uhs";
+ pinctrl-0 = <&mmc3_pins_default>;
+ pinctrl-1 = <&mmc3_pins_uhs>;
+ bus-width = <4>;
+ max-frequency = <200000000>;
+ cap-sd-highspeed;
+ sd-uhs-sdr50;
+ sd-uhs-sdr104;
+ sdr104-clk-delay = <5>;
+ keep-power-in-suspend;
+ enable-sdio-wakeup;
+ cap-sdio-irq;
+ vmmc-supply = <&sdio_fixed_3v3>;
+ vqmmc-supply = <&mt6397_vgp3_reg>;
+ non-removable;
+};
+
&pio {
disp_pwm0_pins: disp_pwm0_pins {
pins1 {
@@ -197,6 +224,36 @@
};
};
+ mmc3_pins_default: mmc3default {
+ pins_dat {
+ pinmux = <MT8173_PIN_22_MSDC3_DAT0__FUNC_MSDC3_DAT0>,
+ <MT8173_PIN_23_MSDC3_DAT1__FUNC_MSDC3_DAT1>,
+ <MT8173_PIN_24_MSDC3_DAT2__FUNC_MSDC3_DAT2>,
+ <MT8173_PIN_25_MSDC3_DAT3__FUNC_MSDC3_DAT3>;
+ input-enable;
+ drive-strength = <MTK_DRIVE_8mA>;
+ bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
+ };
+
+ pins_cmd {
+ pinmux = <MT8173_PIN_27_MSDC3_CMD__FUNC_MSDC3_CMD>;
+ input-enable;
+ drive-strength = <MTK_DRIVE_8mA>;
+ bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
+ };
+
+ pins_clk {
+ pinmux = <MT8173_PIN_26_MSDC3_CLK__FUNC_MSDC3_CLK>;
+ bias-pull-down;
+ drive-strength = <MTK_DRIVE_8mA>;
+ };
+
+ pins_pdn {
+ pinmux = <MT8173_PIN_85_AUD_DAT_MOSI__FUNC_GPIO85>;
+ output-low;
+ };
+ };
+
mmc0_pins_uhs: mmc0 {
pins_cmd_dat {
pinmux = <MT8173_PIN_57_MSDC0_DAT0__FUNC_MSDC0_DAT0>,
@@ -243,6 +300,31 @@
bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
};
};
+
+ mmc3_pins_uhs: mmc3 {
+ pins_dat {
+ pinmux = <MT8173_PIN_22_MSDC3_DAT0__FUNC_MSDC3_DAT0>,
+ <MT8173_PIN_23_MSDC3_DAT1__FUNC_MSDC3_DAT1>,
+ <MT8173_PIN_24_MSDC3_DAT2__FUNC_MSDC3_DAT2>,
+ <MT8173_PIN_25_MSDC3_DAT3__FUNC_MSDC3_DAT3>;
+ input-enable;
+ drive-strength = <MTK_DRIVE_8mA>;
+ bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
+ };
+
+ pins_cmd {
+ pinmux = <MT8173_PIN_27_MSDC3_CMD__FUNC_MSDC3_CMD>;
+ input-enable;
+ drive-strength = <MTK_DRIVE_8mA>;
+ bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
+ };
+
+ pins_clk {
+ pinmux = <MT8173_PIN_26_MSDC3_CLK__FUNC_MSDC3_CLK>;
+ drive-strength = <MTK_DRIVE_8mA>;
+ bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+ };
+ };
};
&pwm0 {
--
1.7.9.5
^ permalink raw reply related
* [PATCH 3/4] sdio: mediatek: support sdr104_clk_delay in sdio
From: Yong Mao @ 2016-11-08 6:09 UTC (permalink / raw)
To: Ulf Hansson
Cc: Mark Rutland, devicetree, YH Huang, Nicolas Boichat,
Mathias Nyman, srv_heupstream, Catalin Marinas, linux-mediatek,
Will Deacon, Douglas Anderson, yong mao, linux-kernel,
Chunfeng Yun, Rob Herring, Geert Uytterhoeven, linux-arm-kernel,
Philipp Zabel, Matthias Brugger, linux-mmc, Eddie Huang,
Chaotian Jing
In-Reply-To: <1478585341-6749-1-git-send-email-yong.mao@mediatek.com>
From: yong mao <yong.mao@mediatek.com>
In order to let sdio run stable with 200M clock,
we should setup the value of clock delay.
Signed-off-by: Yong Mao <yong.mao@mediatek.com>
Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
---
drivers/mmc/host/mtk-sd.c | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)
diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
index 37edf30..fba28f2 100644
--- a/drivers/mmc/host/mtk-sd.c
+++ b/drivers/mmc/host/mtk-sd.c
@@ -213,6 +213,7 @@
#define MSDC_PAD_TUNE_DATRRDLY (0x1f << 8) /* RW */
#define MSDC_PAD_TUNE_CMDRDLY (0x1f << 16) /* RW */
+#define MSDC_PAD_TUNE_CLKTDLY (0x1f << 27) /* RW */
#define PAD_DS_TUNE_DLY1 (0x1f << 2) /* RW */
#define PAD_DS_TUNE_DLY2 (0x1f << 7) /* RW */
@@ -335,6 +336,7 @@ struct msdc_host {
unsigned char timing;
bool vqmmc_enabled;
u32 hs400_ds_delay;
+ u32 sdr104_clk_delay;
bool hs400_mode; /* current eMMC will run at hs400 mode */
struct msdc_save_para save_para; /* used when gate HCLK */
struct msdc_tune_para def_tune_para; /* default tune setting */
@@ -1230,7 +1232,8 @@ static void msdc_init_hw(struct msdc_host *host)
writel(val, host->base + MSDC_INT);
spin_unlock_irqrestore(&host->irqlock, flags);
- writel(0, host->base + MSDC_PAD_TUNE);
+ sdr_set_field(host->base + MSDC_PAD_TUNE,
+ MSDC_PAD_TUNE_CLKTDLY, host->sdr104_clk_delay);
writel(0, host->base + MSDC_IOCON);
sdr_set_field(host->base + MSDC_IOCON, MSDC_IOCON_DDLSEL, 0);
writel(0x403c0046, host->base + MSDC_PATCH_BIT);
@@ -1671,6 +1674,11 @@ static int msdc_drv_probe(struct platform_device *pdev)
dev_dbg(&pdev->dev, "hs400-ds-delay: %x\n",
host->hs400_ds_delay);
+ if (!of_property_read_u32(pdev->dev.of_node, "sdr104-clk-delay",
+ &host->sdr104_clk_delay))
+ dev_dbg(&pdev->dev, "sdr104-clk-delay: %x\n",
+ host->sdr104_clk_delay);
+
host->dev = &pdev->dev;
host->mmc = mmc;
host->src_clk_freq = clk_get_rate(host->src_clk);
--
1.7.9.5
^ permalink raw reply related
* [PATCH 2/4] sdio: mediatek: Support sdio feature
From: Yong Mao @ 2016-11-08 6:08 UTC (permalink / raw)
To: Ulf Hansson
Cc: Mark Rutland, devicetree-u79uwXL29TY76Z2rM5mHXA, YH Huang,
Nicolas Boichat, Mathias Nyman,
srv_heupstream-NuS5LvNUpcJWk0Htik3J/w, Catalin Marinas,
linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, Will Deacon,
Douglas Anderson, yong mao, linux-kernel-u79uwXL29TY76Z2rM5mHXA,
Chunfeng Yun, Rob Herring, Geert Uytterhoeven,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, Philipp Zabel,
Matthias Brugger, linux-mmc-u79uwXL29TY76Z2rM5mHXA, Eddie Huang,
Chaotian Jing
In-Reply-To: <1478585341-6749-1-git-send-email-yong.mao-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
From: yong mao <yong.mao-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
1. Add irqlock to protect accessing the shared register
2. Modify the implementation of msdc_card_busy due to SDIO
3. Implement enable_sdio_irq
4. Add msdc_recheck_sdio_irq mechanism to make sure all
interrupts can be processed immediately
Signed-off-by: Yong Mao <yong.mao-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
Signed-off-by: Chaotian Jing <chaotian.jing-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
---
drivers/mmc/host/mtk-sd.c | 167 ++++++++++++++++++++++++++++++++++-----------
1 file changed, 129 insertions(+), 38 deletions(-)
diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
index b29683b..37edf30 100644
--- a/drivers/mmc/host/mtk-sd.c
+++ b/drivers/mmc/host/mtk-sd.c
@@ -117,6 +117,7 @@
#define MSDC_PS_CDSTS (0x1 << 1) /* R */
#define MSDC_PS_CDDEBOUNCE (0xf << 12) /* RW */
#define MSDC_PS_DAT (0xff << 16) /* R */
+#define MSDC_PS_DATA1 (0x1 << 17) /* R */
#define MSDC_PS_CMD (0x1 << 24) /* R */
#define MSDC_PS_WP (0x1 << 31) /* R */
@@ -304,6 +305,7 @@ struct msdc_host {
int cmd_rsp;
spinlock_t lock;
+ spinlock_t irqlock; /* sdio irq lock */
struct mmc_request *mrq;
struct mmc_command *cmd;
struct mmc_data *data;
@@ -322,12 +324,14 @@ struct msdc_host {
struct pinctrl_state *pins_uhs;
struct delayed_work req_timeout;
int irq; /* host interrupt */
+ bool irq_thread_alive;
struct clk *src_clk; /* msdc source clock */
struct clk *h_clk; /* msdc h_clk */
u32 mclk; /* mmc subsystem clock frequency */
u32 src_clk_freq; /* source clock frequency */
u32 sclk; /* SD/MS bus clock frequency */
+ bool clock_on;
unsigned char timing;
bool vqmmc_enabled;
u32 hs400_ds_delay;
@@ -387,6 +391,7 @@ static void msdc_reset_hw(struct msdc_host *host)
static void msdc_cmd_next(struct msdc_host *host,
struct mmc_request *mrq, struct mmc_command *cmd);
+static void msdc_recheck_sdio_irq(struct msdc_host *host);
static const u32 cmd_ints_mask = MSDC_INTEN_CMDRDY | MSDC_INTEN_RSPCRCERR |
MSDC_INTEN_CMDTMO | MSDC_INTEN_ACMDRDY |
@@ -513,6 +518,7 @@ static void msdc_gate_clock(struct msdc_host *host)
{
clk_disable_unprepare(host->src_clk);
clk_disable_unprepare(host->h_clk);
+ host->clock_on = false;
}
static void msdc_ungate_clock(struct msdc_host *host)
@@ -521,6 +527,7 @@ static void msdc_ungate_clock(struct msdc_host *host)
clk_prepare_enable(host->src_clk);
while (!(readl(host->base + MSDC_CFG) & MSDC_CFG_CKSTB))
cpu_relax();
+ host->clock_on = true;
}
static void msdc_set_mclk(struct msdc_host *host, unsigned char timing, u32 hz)
@@ -529,6 +536,7 @@ static void msdc_set_mclk(struct msdc_host *host, unsigned char timing, u32 hz)
u32 flags;
u32 div;
u32 sclk;
+ unsigned long irq_flags;
if (!hz) {
dev_dbg(host->dev, "set mclk to 0\n");
@@ -537,8 +545,11 @@ static void msdc_set_mclk(struct msdc_host *host, unsigned char timing, u32 hz)
return;
}
+ spin_lock_irqsave(&host->irqlock, irq_flags);
flags = readl(host->base + MSDC_INTEN);
sdr_clr_bits(host->base + MSDC_INTEN, flags);
+ spin_unlock_irqrestore(&host->irqlock, irq_flags);
+
sdr_clr_bits(host->base + MSDC_CFG, MSDC_CFG_HS400_CK_MODE);
if (timing == MMC_TIMING_UHS_DDR50 ||
timing == MMC_TIMING_MMC_DDR52 ||
@@ -588,7 +599,10 @@ static void msdc_set_mclk(struct msdc_host *host, unsigned char timing, u32 hz)
host->timing = timing;
/* need because clk changed. */
msdc_set_timeout(host, host->timeout_ns, host->timeout_clks);
+
+ spin_lock_irqsave(&host->irqlock, irq_flags);
sdr_set_bits(host->base + MSDC_INTEN, flags);
+ spin_unlock_irqrestore(&host->irqlock, irq_flags);
/*
* mmc_select_hs400() will drop to 50Mhz and High speed mode,
@@ -690,6 +704,7 @@ static inline u32 msdc_cmd_prepare_raw_cmd(struct msdc_host *host,
static void msdc_start_data(struct msdc_host *host, struct mmc_request *mrq,
struct mmc_command *cmd, struct mmc_data *data)
{
+ unsigned long flags;
bool read;
WARN_ON(host->data);
@@ -698,8 +713,12 @@ static void msdc_start_data(struct msdc_host *host, struct mmc_request *mrq,
mod_delayed_work(system_wq, &host->req_timeout, DAT_TIMEOUT);
msdc_dma_setup(host, &host->dma, data);
+
+ spin_lock_irqsave(&host->irqlock, flags);
sdr_set_bits(host->base + MSDC_INTEN, data_ints_mask);
sdr_set_field(host->base + MSDC_DMA_CTRL, MSDC_DMA_CTRL_START, 1);
+ spin_unlock_irqrestore(&host->irqlock, flags);
+
dev_dbg(host->dev, "DMA start\n");
dev_dbg(host->dev, "%s: cmd=%d DMA data: %d blocks; read=%d\n",
__func__, cmd->opcode, data->blocks, read);
@@ -756,6 +775,7 @@ static void msdc_request_done(struct msdc_host *host, struct mmc_request *mrq)
if (mrq->data)
msdc_unprepare_data(host, mrq);
mmc_request_done(host->mmc, mrq);
+ msdc_recheck_sdio_irq(host);
}
/* returns true if command is fully handled; returns false otherwise */
@@ -779,15 +799,17 @@ static bool msdc_cmd_done(struct msdc_host *host, int events,
| MSDC_INT_CMDTMO)))
return done;
- spin_lock_irqsave(&host->lock, flags);
done = !host->cmd;
+ spin_lock_irqsave(&host->lock, flags);
host->cmd = NULL;
spin_unlock_irqrestore(&host->lock, flags);
if (done)
return true;
+ spin_lock_irqsave(&host->irqlock, flags);
sdr_clr_bits(host->base + MSDC_INTEN, cmd_ints_mask);
+ spin_unlock_irqrestore(&host->irqlock, flags);
if (cmd->flags & MMC_RSP_PRESENT) {
if (cmd->flags & MMC_RSP_136) {
@@ -902,6 +924,7 @@ static inline bool msdc_cmd_is_ready(struct msdc_host *host,
static void msdc_start_command(struct msdc_host *host,
struct mmc_request *mrq, struct mmc_command *cmd)
{
+ unsigned long flags;
u32 rawcmd;
WARN_ON(host->cmd);
@@ -920,7 +943,10 @@ static void msdc_start_command(struct msdc_host *host,
rawcmd = msdc_cmd_prepare_raw_cmd(host, mrq, cmd);
mod_delayed_work(system_wq, &host->req_timeout, DAT_TIMEOUT);
+ spin_lock_irqsave(&host->irqlock, flags);
sdr_set_bits(host->base + MSDC_INTEN, cmd_ints_mask);
+ spin_unlock_irqrestore(&host->irqlock, flags);
+
writel(cmd->arg, host->base + SDC_ARG);
writel(rawcmd, host->base + SDC_CMD);
}
@@ -1013,8 +1039,8 @@ static bool msdc_data_xfer_done(struct msdc_host *host, u32 events,
| MSDC_INT_DMA_BDCSERR | MSDC_INT_DMA_GPDCSERR
| MSDC_INT_DMA_PROTECT);
- spin_lock_irqsave(&host->lock, flags);
done = !host->data;
+ spin_lock_irqsave(&host->lock, flags);
if (check_data)
host->data = NULL;
spin_unlock_irqrestore(&host->lock, flags);
@@ -1029,7 +1055,11 @@ static bool msdc_data_xfer_done(struct msdc_host *host, u32 events,
1);
while (readl(host->base + MSDC_DMA_CFG) & MSDC_DMA_CFG_STS)
cpu_relax();
+
+ spin_lock_irqsave(&host->irqlock, flags);
sdr_clr_bits(host->base + MSDC_INTEN, data_ints_mask);
+ spin_unlock_irqrestore(&host->irqlock, flags);
+
dev_dbg(host->dev, "DMA stop\n");
if ((events & MSDC_INT_XFER_COMPL) && (!stop || !stop->error)) {
@@ -1134,44 +1164,47 @@ static void msdc_request_timeout(struct work_struct *work)
static irqreturn_t msdc_irq(int irq, void *dev_id)
{
+ unsigned long flags;
struct msdc_host *host = (struct msdc_host *) dev_id;
+ struct mmc_request *mrq;
+ struct mmc_command *cmd;
+ struct mmc_data *data;
+ u32 events, event_mask;
+
+ spin_lock_irqsave(&host->irqlock, flags);
+ events = readl(host->base + MSDC_INT);
+ event_mask = readl(host->base + MSDC_INTEN);
+ /* clear interrupts */
+ writel(events & event_mask, host->base + MSDC_INT);
+
+ mrq = host->mrq;
+ cmd = host->cmd;
+ data = host->data;
+ spin_unlock_irqrestore(&host->irqlock, flags);
+
+ if ((events & event_mask) & MSDC_INT_SDIOIRQ) {
+ mmc_signal_sdio_irq(host->mmc);
+ if (!mrq)
+ return IRQ_HANDLED;
+ }
- while (true) {
- unsigned long flags;
- struct mmc_request *mrq;
- struct mmc_command *cmd;
- struct mmc_data *data;
- u32 events, event_mask;
-
- spin_lock_irqsave(&host->lock, flags);
- events = readl(host->base + MSDC_INT);
- event_mask = readl(host->base + MSDC_INTEN);
- /* clear interrupts */
- writel(events & event_mask, host->base + MSDC_INT);
-
- mrq = host->mrq;
- cmd = host->cmd;
- data = host->data;
- spin_unlock_irqrestore(&host->lock, flags);
-
- if (!(events & event_mask))
- break;
+ if (!(events & (event_mask & ~MSDC_INT_SDIOIRQ)))
+ return IRQ_HANDLED;
- if (!mrq) {
- dev_err(host->dev,
- "%s: MRQ=NULL; events=%08X; event_mask=%08X\n",
- __func__, events, event_mask);
- WARN_ON(1);
- break;
- }
+ if (!mrq) {
+ dev_err(host->dev,
+ "%s: MRQ=NULL; events=%08X; event_mask=%08X\n",
+ __func__, events, event_mask);
+ WARN_ON(1);
+ return IRQ_HANDLED;
+ }
- dev_dbg(host->dev, "%s: events=%08X\n", __func__, events);
+ dev_dbg(host->dev, "%s: events=%08X\n", __func__, events);
- if (cmd)
- msdc_cmd_done(host, events, mrq, cmd);
- else if (data)
- msdc_data_xfer_done(host, events, mrq, data);
- }
+ if (cmd)
+ msdc_cmd_done(host, events, mrq, cmd);
+ else if (data)
+ msdc_data_xfer_done(host, events, mrq, data);
return IRQ_HANDLED;
}
@@ -1179,6 +1212,7 @@ static irqreturn_t msdc_irq(int irq, void *dev_id)
static void msdc_init_hw(struct msdc_host *host)
{
u32 val;
+ unsigned long flags;
/* Configure to MMC/SD mode, clock free running */
sdr_set_bits(host->base + MSDC_CFG, MSDC_CFG_MODE | MSDC_CFG_CKPDN);
@@ -1190,9 +1224,11 @@ static void msdc_init_hw(struct msdc_host *host)
sdr_clr_bits(host->base + MSDC_PS, MSDC_PS_CDEN);
/* Disable and clear all interrupts */
+ spin_lock_irqsave(&host->irqlock, flags);
writel(0, host->base + MSDC_INTEN);
val = readl(host->base + MSDC_INT);
writel(val, host->base + MSDC_INT);
+ spin_unlock_irqrestore(&host->irqlock, flags);
writel(0, host->base + MSDC_PAD_TUNE);
writel(0, host->base + MSDC_IOCON);
@@ -1207,9 +1243,11 @@ static void msdc_init_hw(struct msdc_host *host)
*/
sdr_set_bits(host->base + SDC_CFG, SDC_CFG_SDIO);
- /* disable detect SDIO device interrupt function */
- sdr_clr_bits(host->base + SDC_CFG, SDC_CFG_SDIOIDE);
-
+ if (host->mmc->caps & MMC_CAP_SDIO_IRQ)
+ sdr_set_bits(host->base + SDC_CFG, SDC_CFG_SDIOIDE);
+ else
+ /* disable detect SDIO device interrupt function */
+ sdr_clr_bits(host->base + SDC_CFG, SDC_CFG_SDIOIDE);
/* Configure to default data timeout */
sdr_set_field(host->base + SDC_CFG, SDC_CFG_DTOC, 3);
@@ -1221,11 +1259,15 @@ static void msdc_init_hw(struct msdc_host *host)
static void msdc_deinit_hw(struct msdc_host *host)
{
u32 val;
+ unsigned long flags;
+
/* Disable and clear all interrupts */
+ spin_lock_irqsave(&host->irqlock, flags);
writel(0, host->base + MSDC_INTEN);
val = readl(host->base + MSDC_INT);
writel(val, host->base + MSDC_INT);
+ spin_unlock_irqrestore(&host->irqlock, flags);
}
/* init gpd and bd list in msdc_drv_probe */
@@ -1493,6 +1535,52 @@ static void msdc_hw_reset(struct mmc_host *mmc)
sdr_clr_bits(host->base + EMMC_IOCON, 1);
}
+/**
+ * msdc_recheck_sdio_irq - recheck whether the SDIO IRQ is lost
+ * @host: The host to check.
+ *
+ * Host controller may lost interrupt in some special case.
+ * Add sdio IRQ recheck mechanism to make sure all interrupts
+ * can be processed immediately
+ *
+ */
+static void msdc_recheck_sdio_irq(struct msdc_host *host)
+{
+ u32 reg_int, reg_ps;
+
+ if (host->clock_on &&
+ (host->mmc->caps & MMC_CAP_SDIO_IRQ) &&
+ host->irq_thread_alive) {
+ reg_int = readl(host->base + MSDC_INT);
+ reg_ps = readl(host->base + MSDC_PS);
+ if (!((reg_int & MSDC_INT_SDIOIRQ) ||
+ (reg_ps & MSDC_PS_DATA1))) {
+ mmc_signal_sdio_irq(host->mmc);
+ }
+ }
+}
+
+static void msdc_enable_sdio_irq(struct mmc_host *mmc, int enable)
+{
+ unsigned long flags;
+ struct msdc_host *host = mmc_priv(mmc);
+
+ host->irq_thread_alive = true;
+ if (enable) {
+ pm_runtime_get_sync(host->dev);
+ msdc_recheck_sdio_irq(host);
+
+ spin_lock_irqsave(&host->irqlock, flags);
+ sdr_set_bits(host->base + SDC_CFG, SDC_CFG_SDIOIDE);
+ sdr_set_bits(host->base + MSDC_INTEN, MSDC_INTEN_SDIOIRQ);
+ spin_unlock_irqrestore(&host->irqlock, flags);
+ } else {
+ spin_lock_irqsave(&host->irqlock, flags);
+ sdr_clr_bits(host->base + MSDC_INTEN, MSDC_INTEN_SDIOIRQ);
+ spin_unlock_irqrestore(&host->irqlock, flags);
+ }
+}
+
static struct mmc_host_ops mt_msdc_ops = {
.post_req = msdc_post_req,
.pre_req = msdc_pre_req,
@@ -1504,6 +1592,7 @@ static void msdc_hw_reset(struct mmc_host *mmc)
.execute_tuning = msdc_execute_tuning,
.prepare_hs400_tuning = msdc_prepare_hs400_tuning,
.hw_reset = msdc_hw_reset,
+ .enable_sdio_irq = msdc_enable_sdio_irq,
};
static int msdc_drv_probe(struct platform_device *pdev)
@@ -1600,6 +1689,7 @@ static int msdc_drv_probe(struct platform_device *pdev)
mmc_dev(mmc)->dma_mask = &host->dma_mask;
host->timeout_clks = 3 * 1048576;
+ host->irq_thread_alive = false;
host->dma.gpd = dma_alloc_coherent(&pdev->dev,
2 * sizeof(struct mt_gpdma_desc),
&host->dma.gpd_addr, GFP_KERNEL);
@@ -1613,6 +1703,7 @@ static int msdc_drv_probe(struct platform_device *pdev)
msdc_init_gpd_bd(host, &host->dma);
INIT_DELAYED_WORK(&host->req_timeout, msdc_request_timeout);
spin_lock_init(&host->lock);
+ spin_lock_init(&host->irqlock);
platform_set_drvdata(pdev, mmc);
msdc_ungate_clock(host);
--
1.7.9.5
^ permalink raw reply related
* [PATCH 1/4] mmc: mediatek: Fix CMD6 timeout issue
From: Yong Mao @ 2016-11-08 6:08 UTC (permalink / raw)
To: Ulf Hansson
Cc: Rob Herring, Mark Rutland, Catalin Marinas, Will Deacon,
Matthias Brugger, YH Huang, Mathias Nyman, Chunfeng Yun,
Eddie Huang, Philipp Zabel, yong mao, Chaotian Jing,
Nicolas Boichat, Douglas Anderson, Geert Uytterhoeven,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-mmc-u79uwXL29TY76Z2rM5mHXA, linux-mediatek
In-Reply-To: <1478585341-6749-1-git-send-email-yong.mao-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
From: yong mao <yong.mao-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
When initializing EMMC, after switch to HS400,
it will issue CMD6 to change ext_csd, if first CMD6 got CRC
error, the repeat CMD6 may get timeout, that's
because SDCBSY was cleared by msdc_reset_hw()
Signed-off-by: Yong Mao <yong.mao-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
Signed-off-by: Chaotian Jing <chaotian.jing-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
---
drivers/mmc/host/mtk-sd.c | 77 ++++++++++++++++++++++++++++++---------------
1 file changed, 51 insertions(+), 26 deletions(-)
diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
index 84e9afc..b29683b 100644
--- a/drivers/mmc/host/mtk-sd.c
+++ b/drivers/mmc/host/mtk-sd.c
@@ -826,6 +826,15 @@ static bool msdc_cmd_done(struct msdc_host *host, int events,
return true;
}
+static int msdc_card_busy(struct mmc_host *mmc)
+{
+ struct msdc_host *host = mmc_priv(mmc);
+ u32 status = readl(host->base + MSDC_PS);
+
+ /* check if data0 is low */
+ return !(status & BIT(16));
+}
+
/* It is the core layer's responsibility to ensure card status
* is correct before issue a request. but host design do below
* checks recommended.
@@ -835,10 +844,20 @@ static inline bool msdc_cmd_is_ready(struct msdc_host *host,
{
/* The max busy time we can endure is 20ms */
unsigned long tmo = jiffies + msecs_to_jiffies(20);
+ u32 count = 0;
+
+ if (in_interrupt()) {
+ while ((readl(host->base + SDC_STS) & SDC_STS_CMDBUSY) &&
+ (count < 1000)) {
+ udelay(1);
+ count++;
+ }
+ } else {
+ while ((readl(host->base + SDC_STS) & SDC_STS_CMDBUSY) &&
+ time_before(jiffies, tmo))
+ cpu_relax();
+ }
- while ((readl(host->base + SDC_STS) & SDC_STS_CMDBUSY) &&
- time_before(jiffies, tmo))
- cpu_relax();
if (readl(host->base + SDC_STS) & SDC_STS_CMDBUSY) {
dev_err(host->dev, "CMD bus busy detected\n");
host->error |= REQ_CMD_BUSY;
@@ -846,17 +865,35 @@ static inline bool msdc_cmd_is_ready(struct msdc_host *host,
return false;
}
- if (mmc_resp_type(cmd) == MMC_RSP_R1B || cmd->data) {
- tmo = jiffies + msecs_to_jiffies(20);
- /* R1B or with data, should check SDCBUSY */
- while ((readl(host->base + SDC_STS) & SDC_STS_SDCBUSY) &&
- time_before(jiffies, tmo))
- cpu_relax();
- if (readl(host->base + SDC_STS) & SDC_STS_SDCBUSY) {
- dev_err(host->dev, "Controller busy detected\n");
- host->error |= REQ_CMD_BUSY;
- msdc_cmd_done(host, MSDC_INT_CMDTMO, mrq, cmd);
- return false;
+ if (cmd->opcode != MMC_SEND_STATUS) {
+ count = 0;
+ /* Consider that CMD6 crc error before card was init done,
+ * mmc_retune() will return directly as host->card is null.
+ * and CMD6 will retry 3 times, must ensure card is in transfer
+ * state when retry.
+ */
+ tmo = jiffies + msecs_to_jiffies(60 * 1000);
+ while (1) {
+ if (msdc_card_busy(host->mmc)) {
+ if (in_interrupt()) {
+ udelay(1);
+ count++;
+ } else {
+ msleep_interruptible(10);
+ }
+ } else {
+ break;
+ }
+ /* Timeout if the device never
+ * leaves the program state.
+ */
+ if (count > 1000 || time_after(jiffies, tmo)) {
+ pr_err("%s: Card stuck in programming state! %s\n",
+ mmc_hostname(host->mmc), __func__);
+ host->error |= REQ_CMD_BUSY;
+ msdc_cmd_done(host, MSDC_INT_CMDTMO, mrq, cmd);
+ return false;
+ }
}
}
return true;
@@ -1070,18 +1107,6 @@ static int msdc_ops_switch_volt(struct mmc_host *mmc, struct mmc_ios *ios)
return ret;
}
-static int msdc_card_busy(struct mmc_host *mmc)
-{
- struct msdc_host *host = mmc_priv(mmc);
- u32 status = readl(host->base + MSDC_PS);
-
- /* check if any pin between dat[0:3] is low */
- if (((status >> 16) & 0xf) != 0xf)
- return 1;
-
- return 0;
-}
-
static void msdc_request_timeout(struct work_struct *work)
{
struct msdc_host *host = container_of(work, struct msdc_host,
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related
* [PATCH 0/4] Support sdio feature
From: Yong Mao @ 2016-11-08 6:08 UTC (permalink / raw)
To: Ulf Hansson
Cc: Mark Rutland, devicetree-u79uwXL29TY76Z2rM5mHXA, YH Huang,
Nicolas Boichat, Mathias Nyman,
srv_heupstream-NuS5LvNUpcJWk0Htik3J/w, Catalin Marinas,
linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, Will Deacon,
Douglas Anderson, yong mao, linux-kernel-u79uwXL29TY76Z2rM5mHXA,
Chunfeng Yun, Rob Herring, Geert Uytterhoeven,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, Philipp Zabel,
Matthias Brugger, linux-mmc-u79uwXL29TY76Z2rM5mHXA, Eddie Huang,
Chaotian Jing
Fix CMD6 timeout issue
Add irqlock to protect accessing the shared register
Modify the implementation of msdc_card_busy
Add msdc_recheck_sdio_irq mechanism
Support sdr104_clk_delay in sdio
Add description of mmc3 for supporting sdio feature
yong mao (4):
mmc: mediatek: Fix CMD6 timeout issue
sdio: mediatek: Support sdio feature
sdio: mediatek: support sdr104_clk_delay in sdio
dts: arm64: enable mmc3 for supporting sdio feature
arch/arm64/boot/dts/mediatek/mt8173-evb.dts | 82 +++++++++
drivers/mmc/host/mtk-sd.c | 254 +++++++++++++++++++++-------
2 files changed, 271 insertions(+), 65 deletions(-)
--
1.8.1.1.dirty
^ permalink raw reply
* RE: [PATCH V2 2/4] mfd: pv88080: MFD core support
From: Eric Hyeung Dong Jeong @ 2016-11-08 6:08 UTC (permalink / raw)
To: Linus Walleij, Eric Hyeung Dong Jeong, Wolfram Sang
Cc: LINUX-KERNEL, Lee Jones, Alexandre Courbot, DEVICETREE,
LINUX-GPIO, Liam Girdwood, Mark Brown, Mark Rutland, Rob Herring,
Support Opensource
In-Reply-To: <CACRpkdZ1jrvbEdxZTUoBgrabdyaY2eFcmp2cxQbLTR-QK7yN4g@mail.gmail.com>
On Friday, October 28, 2016 5:11 AM, Linux Walleij wrote:
> On Thu, Oct 27, 2016 at 3:03 AM, Eric Jeong
> <eric.jeong.opensource@diasemi.com> wrote:
>
> > From: Eric Jeong <eric.jeong.opensource@diasemi.com>
> >
> > This patch adds supports for PV88080 MFD core device.
> >
> > It provides communication through the I2C interface.
> > It contains the following components:
> > - Regulators
> > - Configurable GPIOs
> >
> > Kconfig and Makefile are updated to reflect support for PV88080 PMIC.
> >
> > Signed-off-by: Eric Jeong <eric.jeong.opensource@diasemi.com>
> (...)
> > drivers/mfd/pv88080-i2c.c | 99 ++++++++++++++++
>
> This looks like a pure I2C driver.
>
> Why is it not in drivers/i2c/busses/i2c-pv88080.c?
>
> Yours,
> Linus Walleij
Ok. I agree with you. So, I will send patch again after combining the relevant files into one.
Thank you.
Regards
Eric
^ permalink raw reply
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox