* Re: [PATCH 1/1] ARM: dts: imx6ul: fix clock frequency property name of I2C buses
From: Shawn Guo @ 2019-07-22 6:50 UTC (permalink / raw)
To: Sébastien Szymanski
Cc: Mark Rutland, devicetree, Sascha Hauer, Rob Herring,
NXP Linux Team, Pengutronix Kernel Team, Fabio Estevam,
linux-arm-kernel
In-Reply-To: <20190704110053.19028-1-sebastien.szymanski@armadeus.com>
On Thu, Jul 04, 2019 at 01:00:53PM +0200, Sébastien Szymanski wrote:
> A few boards set clock frequency of their I2C buses with
> "clock_frequency" property. The right property is "clock-frequency".
>
> Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Applied, thanks.
^ permalink raw reply
* RE: [EXT] Re: [PATCH arm64/dts 1/1] arm64: dts: imx8qxp: add lpuart baud clock
From: Andy Duan @ 2019-07-22 6:52 UTC (permalink / raw)
To: Shawn Guo
Cc: devicetree@vger.kernel.org, daniel.baluta@gmail.com,
festevam@gmail.com, linux-arm-kernel@lists.infradead.org
In-Reply-To: <20190722064649.GA3738@dragon>
From: Shawn Guo <shawnguo@kernel.org> Sent: Monday, July 22, 2019 2:47 PM
> On Thu, Jul 04, 2019 at 06:04:43PM +0800, fugang.duan@nxp.com wrote:
> > From: Fugang Duan <fugang.duan@nxp.com>
> >
> > Add imx8qxp lpuart baud clock.
> >
> > Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
> > ---
> > arch/arm64/boot/dts/freescale/imx8qxp.dtsi | 23
> > +++++++++++++++--------
> > 1 file changed, 15 insertions(+), 8 deletions(-)
> >
> > diff --git a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
> > b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
> > index 05fa0b7..4402b2e 100644
> > --- a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
> > +++ b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
> > @@ -30,6 +30,9 @@
> > mmc2 = &usdhc3;
> > mu1 = &lsio_mu1;
> > serial0 = &adma_lpuart0;
> > + serial1 = &adma_lpuart1;
> > + serial2 = &adma_lpuart2;
> > + serial3 = &adma_lpuart3;
>
> This is not about adding baud clock, right? Please either mention the change
> in the commit log, or have it as a separate patch.
>
> Shawn
Thanks for your review.
I will send v2 to separate the patch.
>
> > };
> >
> > cpus {
> > @@ -209,8 +212,9 @@
> > reg = <0x5a060000 0x1000>;
> > interrupts = <GIC_SPI 225
> IRQ_TYPE_LEVEL_HIGH>;
> > interrupt-parent = <&gic>;
> > - clocks = <&adma_lpcg
> IMX_ADMA_LPCG_UART0_BAUD_CLK>;
> > - clock-names = "ipg";
> > + clocks = <&adma_lpcg
> IMX_ADMA_LPCG_UART0_IPG_CLK>,
> > + <&adma_lpcg
> IMX_ADMA_LPCG_UART0_BAUD_CLK>;
> > + clock-names = "ipg", "baud";
> > power-domains = <&pd IMX_SC_R_UART_0>;
> > status = "disabled";
> > };
> > @@ -220,8 +224,9 @@
> > reg = <0x5a070000 0x1000>;
> > interrupts = <GIC_SPI 226
> IRQ_TYPE_LEVEL_HIGH>;
> > interrupt-parent = <&gic>;
> > - clocks = <&adma_lpcg
> IMX_ADMA_LPCG_UART1_BAUD_CLK>;
> > - clock-names = "ipg";
> > + clocks = <&adma_lpcg
> IMX_ADMA_LPCG_UART1_IPG_CLK>,
> > + <&adma_lpcg
> IMX_ADMA_LPCG_UART1_BAUD_CLK>;
> > + clock-names = "ipg", "baud";
> > power-domains = <&pd IMX_SC_R_UART_1>;
> > status = "disabled";
> > };
> > @@ -231,8 +236,9 @@
> > reg = <0x5a080000 0x1000>;
> > interrupts = <GIC_SPI 227
> IRQ_TYPE_LEVEL_HIGH>;
> > interrupt-parent = <&gic>;
> > - clocks = <&adma_lpcg
> IMX_ADMA_LPCG_UART2_BAUD_CLK>;
> > - clock-names = "ipg";
> > + clocks = <&adma_lpcg
> IMX_ADMA_LPCG_UART2_IPG_CLK>,
> > + <&adma_lpcg
> IMX_ADMA_LPCG_UART2_BAUD_CLK>;
> > + clock-names = "ipg", "baud";
> > power-domains = <&pd IMX_SC_R_UART_2>;
> > status = "disabled";
> > };
> > @@ -242,8 +248,9 @@
> > reg = <0x5a090000 0x1000>;
> > interrupts = <GIC_SPI 228
> IRQ_TYPE_LEVEL_HIGH>;
> > interrupt-parent = <&gic>;
> > - clocks = <&adma_lpcg
> IMX_ADMA_LPCG_UART3_BAUD_CLK>;
> > - clock-names = "ipg";
> > + clocks = <&adma_lpcg
> IMX_ADMA_LPCG_UART3_IPG_CLK>,
> > + <&adma_lpcg
> IMX_ADMA_LPCG_UART3_BAUD_CLK>;
> > + clock-names = "ipg", "baud";
> > power-domains = <&pd IMX_SC_R_UART_3>;
> > status = "disabled";
> > };
> > --
> > 2.7.4
> >
^ permalink raw reply
* Re: [PATCH V6 14/21] clk: tegra210: Add suspend and resume support
From: Sowjanya Komatineni @ 2019-07-22 6:52 UTC (permalink / raw)
To: Dmitry Osipenko, thierry.reding, jonathanh, tglx, jason,
marc.zyngier, linus.walleij, stefan, mark.rutland
Cc: pdeschrijver, pgaikwad, sboyd, linux-clk, linux-gpio, jckuo,
josephl, talho, linux-tegra, linux-kernel, mperttunen, spatra,
robh+dt, devicetree
In-Reply-To: <ceedb802-7561-488f-3a89-67bee19f2fea@gmail.com>
On 7/21/19 11:10 PM, Dmitry Osipenko wrote:
> 22.07.2019 1:45, Sowjanya Komatineni пишет:
>> On 7/21/19 2:38 PM, Dmitry Osipenko wrote:
>>> 21.07.2019 22:40, Sowjanya Komatineni пишет:
>>>> This patch adds support for clk: tegra210: suspend-resume.
>>>>
>>>> All the CAR controller settings are lost on suspend when core
>>>> power goes off.
>>>>
>>>> This patch has implementation for saving and restoring all PLLs
>>>> and clocks context during system suspend and resume to have the
>>>> clocks back to same state for normal operation.
>>>>
>>>> Acked-by: Thierry Reding <treding@nvidia.com>
>>>> Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
>>>> ---
>>>> drivers/clk/tegra/clk-tegra210.c | 68
>>>> ++++++++++++++++++++++++++++++++++++++--
>>>> drivers/clk/tegra/clk.c | 14 +++++++++
>>>> drivers/clk/tegra/clk.h | 1 +
>>>> 3 files changed, 80 insertions(+), 3 deletions(-)
>>>>
>>>> diff --git a/drivers/clk/tegra/clk-tegra210.c
>>>> b/drivers/clk/tegra/clk-tegra210.c
>>>> index 55a88c0824a5..68271873acc1 100644
>>>> --- a/drivers/clk/tegra/clk-tegra210.c
>>>> +++ b/drivers/clk/tegra/clk-tegra210.c
>>>> @@ -9,6 +9,7 @@
>>>> #include <linux/clkdev.h>
>>>> #include <linux/of.h>
>>>> #include <linux/of_address.h>
>>>> +#include <linux/syscore_ops.h>
>>>> #include <linux/delay.h>
>>>> #include <linux/export.h>
>>>> #include <linux/mutex.h>
>>>> @@ -220,11 +221,15 @@
>>>> #define CLK_M_DIVISOR_SHIFT 2
>>>> #define CLK_M_DIVISOR_MASK 0x3
>>>> +#define CLK_MASK_ARM 0x44
>>>> +#define MISC_CLK_ENB 0x48
>>>> +
>>>> #define RST_DFLL_DVCO 0x2f4
>>>> #define DVFS_DFLL_RESET_SHIFT 0
>>>> #define CLK_RST_CONTROLLER_RST_DEV_Y_SET 0x2a8
>>>> #define CLK_RST_CONTROLLER_RST_DEV_Y_CLR 0x2ac
>>>> +#define CPU_SOFTRST_CTRL 0x380
>>>> #define LVL2_CLK_GATE_OVRA 0xf8
>>>> #define LVL2_CLK_GATE_OVRC 0x3a0
>>>> @@ -2825,6 +2830,7 @@ static int tegra210_enable_pllu(void)
>>>> struct tegra_clk_pll_freq_table *fentry;
>>>> struct tegra_clk_pll pllu;
>>>> u32 reg;
>>>> + int ret;
>>>> for (fentry = pll_u_freq_table; fentry->input_rate; fentry++) {
>>>> if (fentry->input_rate == pll_ref_freq)
>>>> @@ -2853,9 +2859,8 @@ static int tegra210_enable_pllu(void)
>>>> reg |= PLL_ENABLE;
>>>> writel(reg, clk_base + PLLU_BASE);
>>>> - readl_relaxed_poll_timeout_atomic(clk_base + PLLU_BASE, reg,
>>>> - reg & PLL_BASE_LOCK, 2, 1000);
>>>> - if (!(reg & PLL_BASE_LOCK)) {
>>>> + ret = tegra210_wait_for_mask(&pllu, PLLU_BASE, PLL_BASE_LOCK);
>>>> + if (ret) {
>>> Why this is needed? Was there a bug?
>>>
>> during resume pllu init is needed and to use same terga210_init_pllu,
>> poll_timeout_atomic can't be used as its ony for atomic context.
>>
>> So changed to use wait_for_mask which should work in both cases.
> Atomic variant could be used from any context, not sure what do you
> mean. The 'atomic' part only means that function won't cause scheduling
> and that's it.
Sorry, replied incorrect. readx_poll_timeout_atomic uses ktime_get() and
during resume timekeeping suspend/resume happens later than clock
suspend/resume. So using tegra210_wait_for_mask.
both timekeeping and clk-tegra210 drivers are registered as syscore but
not ordered.
>>>> pr_err("Timed out waiting for PLL_U to lock\n");
>>>> return -ETIMEDOUT;
>>>> }
>>>> @@ -3288,6 +3293,56 @@ static void tegra210_disable_cpu_clock(u32 cpu)
>>>> }
>>>> #ifdef CONFIG_PM_SLEEP
>>>> +#define car_readl(_base, _off) readl_relaxed(clk_base + (_base) +
>>>> ((_off) * 4))
>>>> +#define car_writel(_val, _base, _off) \
>>>> + writel_relaxed(_val, clk_base + (_base) + ((_off) * 4))
>>>> +
>>>> +static u32 spare_reg_ctx, misc_clk_enb_ctx, clk_msk_arm_ctx;
>>>> +static u32 cpu_softrst_ctx[3];
>>>> +
>>>> +static int tegra210_clk_suspend(void)
>>>> +{
>>>> + unsigned int i;
>>>> +
>>>> + clk_save_context();
>>>> +
>>>> + /*
>>>> + * save the bootloader configured clock registers SPARE_REG0,
>>>> + * MISC_CLK_ENB, CLK_MASK_ARM, CPU_SOFTRST_CTRL
>>> Nit: Start all multi-line comments with a capital letter and put dot in
>>> the end of sentence.
>>>
>>>> + */
>>>> + spare_reg_ctx = readl_relaxed(clk_base + SPARE_REG0);
>>>> + misc_clk_enb_ctx = readl_relaxed(clk_base + MISC_CLK_ENB);
>>>> + clk_msk_arm_ctx = readl_relaxed(clk_base + CLK_MASK_ARM);
>>>> +
>>>> + for (i = 0; i < ARRAY_SIZE(cpu_softrst_ctx); i++)
>>>> + cpu_softrst_ctx[i] = car_readl(CPU_SOFTRST_CTRL, i);
>>>> +
>>>> + return 0;
>>>> +}
>>>> +
>>>> +static void tegra210_clk_resume(void)
>>>> +{
>>>> + unsigned int i;
>>>> +
>>>> + tegra_clk_osc_resume(clk_base);
>>>> +
>>>> + /*
>>>> + * restore the bootloader configured clock registers SPARE_REG0,
>>>> + * MISC_CLK_ENB, CLK_MASK_ARM, CPU_SOFTRST_CTRL from saved context.
>>> Same here.
>>>
>>>> + */
>>>> + writel_relaxed(spare_reg_ctx, clk_base + SPARE_REG0);
>>>> + writel_relaxed(misc_clk_enb_ctx, clk_base + MISC_CLK_ENB);
>>>> + writel_relaxed(clk_msk_arm_ctx, clk_base + CLK_MASK_ARM);
>>>> +
>>>> + for (i = 0; i < ARRAY_SIZE(cpu_softrst_ctx); i++)
>>>> + car_writel(cpu_softrst_ctx[i], CPU_SOFTRST_CTRL, i);
>>>> +
>>>> + fence_udelay(5, clk_base);
>>>> +
>>>> + tegra210_init_pllu();
>>>> + clk_restore_context();
>>>> +}
>>>> +
>>>> static void tegra210_cpu_clock_suspend(void)
>>>> {
>>>> /* switch coresite to clk_m, save off original source */
>>>> @@ -3303,6 +3358,11 @@ static void tegra210_cpu_clock_resume(void)
>>>> }
>>>> #endif
>>>> +static struct syscore_ops tegra_clk_syscore_ops = {
>>>> + .suspend = tegra210_clk_suspend,
>>>> + .resume = tegra210_clk_resume,
>>>> +};
>>>> +
>>>> static struct tegra_cpu_car_ops tegra210_cpu_car_ops = {
>>>> .wait_for_reset = tegra210_wait_cpu_in_reset,
>>>> .disable_clock = tegra210_disable_cpu_clock,
>>>> @@ -3587,5 +3647,7 @@ static void __init tegra210_clock_init(struct
>>>> device_node *np)
>>>> tegra210_mbist_clk_init();
>>>> tegra_cpu_car_ops = &tegra210_cpu_car_ops;
>>>> +
>>>> + register_syscore_ops(&tegra_clk_syscore_ops);
>>>> }
>>>> CLK_OF_DECLARE(tegra210, "nvidia,tegra210-car", tegra210_clock_init);
>>>> diff --git a/drivers/clk/tegra/clk.c b/drivers/clk/tegra/clk.c
>>>> index 573e3c967ae1..eb08047fd02f 100644
>>>> --- a/drivers/clk/tegra/clk.c
>>>> +++ b/drivers/clk/tegra/clk.c
>>>> @@ -23,6 +23,7 @@
>>>> #define CLK_OUT_ENB_W 0x364
>>>> #define CLK_OUT_ENB_X 0x280
>>>> #define CLK_OUT_ENB_Y 0x298
>>>> +#define CLK_ENB_PLLP_OUT_CPU BIT(31)
>>>> #define CLK_OUT_ENB_SET_L 0x320
>>>> #define CLK_OUT_ENB_CLR_L 0x324
>>>> #define CLK_OUT_ENB_SET_H 0x328
>>>> @@ -199,6 +200,19 @@ const struct tegra_clk_periph_regs
>>>> *get_reg_bank(int clkid)
>>>> }
>>>> }
>>>> +void tegra_clk_set_pllp_out_cpu(bool enable)
>>>> +{
>>>> + u32 val;
>>>> +
>>>> + val = readl_relaxed(clk_base + CLK_OUT_ENB_Y);
>>>> + if (enable)
>>>> + val |= CLK_ENB_PLLP_OUT_CPU;
>>>> + else
>>>> + val &= ~CLK_ENB_PLLP_OUT_CPU;
>>>> +
>>>> + writel_relaxed(val, clk_base + CLK_OUT_ENB_Y);
>>>> +}
>>>> +
>>>> struct clk ** __init tegra_clk_init(void __iomem *regs, int num,
>>>> int banks)
>>>> {
>>>> clk_base = regs;
>>>> diff --git a/drivers/clk/tegra/clk.h b/drivers/clk/tegra/clk.h
>>>> index 562a3ee2d537..0ffa763c755b 100644
>>>> --- a/drivers/clk/tegra/clk.h
>>>> +++ b/drivers/clk/tegra/clk.h
>>>> @@ -863,6 +863,7 @@ int div_frac_get(unsigned long rate, unsigned
>>>> parent_rate, u8 width,
>>>> u8 frac_width, u8 flags);
>>>> void tegra_clk_sync_state_pll(struct clk_hw *hw);
>>>> void tegra_clk_osc_resume(void __iomem *clk_base);
>>>> +void tegra_clk_set_pllp_out_cpu(bool enable);
>>>> /* Combined read fence with delay */
>>>> #define fence_udelay(delay, reg) \
>>>>
^ permalink raw reply
* Re: [PATCH 1/2] ARM: dts: opos6uldev: use OF graph to describe the display
From: Shawn Guo @ 2019-07-22 6:55 UTC (permalink / raw)
To: Sébastien Szymanski
Cc: Mark Rutland, devicetree, Sascha Hauer, Rob Herring,
NXP Linux Team, Pengutronix Kernel Team, Fabio Estevam,
linux-arm-kernel
In-Reply-To: <20190704142324.17675-1-sebastien.szymanski@armadeus.com>
On Thu, Jul 04, 2019 at 04:23:23PM +0200, Sébastien Szymanski wrote:
> To make use of the new eLCDIF DRM driver OF graph description is
> required. Describe the display using OF graph nodes.
>
> Reviewed-by: Fabio Estevam <festevam@gmail.com>
> Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Applied, thanks.
^ permalink raw reply
* Re: [PATCH 0/2] media: add support for DW9768 VCM driver
From: Tomasz Figa @ 2019-07-22 6:56 UTC (permalink / raw)
To: Linux Media Mailing List
Cc: Mark Rutland, devicetree-u79uwXL29TY76Z2rM5mHXA, srv_heupstream,
shengnan.wang-NuS5LvNUpcJWk0Htik3J/w, Louis Kuo, Sj Huang,
Rob Herring, moderated list:ARM/Mediatek SoC support,
dongchun.zhu-NuS5LvNUpcJWk0Htik3J/w, Sakari Ailus,
Matthias Brugger, Cao Bing Bu, Mauro Carvalho Chehab,
list-Y9sIeH5OGRo@public.gmane.org:IOMMU DRIVERS <iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org>, Joerg Roedel <joro-zLv9SwRftAIdnm+yROfE0A@public.gmane.org>,
In-Reply-To: <20190708100641.2702-1-dongchun.zhu-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
On Mon, Jul 8, 2019 at 7:12 PM <dongchun.zhu-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org> wrote:
>
> From: Dongchun Zhu <dongchun.zhu-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
>
> Hello,
>
> Add a v4l2 sub-device driver for Dongwoon's DW9768 lens voice coil.
> This is a voice coil module using the i2c bus to control the focus position.
>
> The DW9768 can control the position with 10 bits value and
> consists of two 8 bit registers show as below:
> register 0x04(DW9768_REG_POSITION):
> +---+---+---+---+---+---+---+---+
> |D07|D06|D05|D04|D03|D02|D01|D00|
> +---+---+---+---+---+---+---+---+
> register 0x03:
> +---+---+---+---+---+---+---+---+
> |---|---|---|---|---|---|D09|D08|
> +---+---+---+---+---+---+---+---+
>
> This driver support :
> - set DW9768 to standby mode once suspend and turn it back to active if resume
> - set the position via V4L2_CID_FOCUS_ABSOLUTE ctrl
>
> Dongchun Zhu (2):
> media: i2c: dw9768: Add DT support and MAINTAINERS entry
> media: i2c: dw9768: Add DW9768 VCM driver
>
> .../bindings/media/i2c/dongwoon,dw9768.txt | 9 +
> MAINTAINERS | 8 +
> drivers/media/i2c/Kconfig | 10 +
> drivers/media/i2c/Makefile | 1 +
> drivers/media/i2c/dw9768.c | 458 +++++++++++++++++++++
> 5 files changed, 486 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/media/i2c/dongwoon,dw9768.txt
> create mode 100644 drivers/media/i2c/dw9768.c
>
> --
> 2.9.2
>
Gentle ping. Some help with review would be appreciated!
Best regards,
Tomasz
^ permalink raw reply
* Re: [PATCH 3/3] media: Add support for Cadence CSI2TX 2.1
From: Jan Kotas @ 2019-07-22 7:07 UTC (permalink / raw)
To: Maxime Ripard
Cc: Jan Kotas, mchehab@kernel.org, Rob Herring, Mark Rutland,
linux-media, linux-devicetree, linux-kernel@vger.kernel.org
In-Reply-To: <20190720082559.pk3odkf5hztgvpif@flea>
> On 20 Jul 2019, at 10:25, Maxime Ripard <maxime.ripard@bootlin.com> wrote:
>
> Hi,
>
> On Thu, Jul 18, 2019 at 12:15:09PM +0100, Jan Kotas wrote:
>> /* Put our lanes (clock and data) out of reset */
>> reg = CSI2TX_DPHY_CFG_CLK_RESET | CSI2TX_DPHY_CFG_MODE_LPDT;
>> for (i = 0; i < csi2tx->num_lanes; i++)
>> - reg |= CSI2TX_DPHY_CFG_LANE_RESET(csi2tx->lanes[i]);
>> + reg |= CSI2TX_DPHY_CFG_LANE_RESET(csi2tx->lanes[i] - 1);
>
> This looks like a separate change?
>
>> writel(reg, csi2tx->base + CSI2TX_DPHY_CFG_REG);
>>
>> - udelay(10);
>> + csi2tx_dphy_init_finish(csi2tx, reg);
>> +}
>>
>> - /* Enable our (clock and data) lanes */
>> - reg |= CSI2TX_DPHY_CFG_CLK_ENABLE;
>> - for (i = 0; i < csi2tx->num_lanes; i++)
>> - reg |= CSI2TX_DPHY_CFG_LANE_ENABLE(csi2tx->lanes[i]);
>
> And you have a similar change here that should be in a separate patch,
> with a proper explanation.
>
> Otherwise, the rest looks good.
OK, I’ll create a separate patch with this modification.
Jan
> Maxime
>
> --
> Maxime Ripard, Bootlin
> Embedded Linux and Kernel engineering
> https://bootlin.com
^ permalink raw reply
* Re: [PATCH V6 14/21] clk: tegra210: Add suspend and resume support
From: Dmitry Osipenko @ 2019-07-22 7:09 UTC (permalink / raw)
To: Sowjanya Komatineni, thierry.reding, jonathanh, tglx, jason,
marc.zyngier, linus.walleij, stefan, mark.rutland
Cc: pdeschrijver, pgaikwad, sboyd, linux-clk, linux-gpio, jckuo,
josephl, talho, linux-tegra, linux-kernel, mperttunen, spatra,
robh+dt, devicetree
In-Reply-To: <e2d0e8cc-b4ea-1148-4af1-fee6bb266cca@nvidia.com>
22.07.2019 9:52, Sowjanya Komatineni пишет:
>
> On 7/21/19 11:10 PM, Dmitry Osipenko wrote:
>> 22.07.2019 1:45, Sowjanya Komatineni пишет:
>>> On 7/21/19 2:38 PM, Dmitry Osipenko wrote:
>>>> 21.07.2019 22:40, Sowjanya Komatineni пишет:
>>>>> This patch adds support for clk: tegra210: suspend-resume.
>>>>>
>>>>> All the CAR controller settings are lost on suspend when core
>>>>> power goes off.
>>>>>
>>>>> This patch has implementation for saving and restoring all PLLs
>>>>> and clocks context during system suspend and resume to have the
>>>>> clocks back to same state for normal operation.
>>>>>
>>>>> Acked-by: Thierry Reding <treding@nvidia.com>
>>>>> Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
>>>>> ---
>>>>> drivers/clk/tegra/clk-tegra210.c | 68
>>>>> ++++++++++++++++++++++++++++++++++++++--
>>>>> drivers/clk/tegra/clk.c | 14 +++++++++
>>>>> drivers/clk/tegra/clk.h | 1 +
>>>>> 3 files changed, 80 insertions(+), 3 deletions(-)
>>>>>
>>>>> diff --git a/drivers/clk/tegra/clk-tegra210.c
>>>>> b/drivers/clk/tegra/clk-tegra210.c
>>>>> index 55a88c0824a5..68271873acc1 100644
>>>>> --- a/drivers/clk/tegra/clk-tegra210.c
>>>>> +++ b/drivers/clk/tegra/clk-tegra210.c
>>>>> @@ -9,6 +9,7 @@
>>>>> #include <linux/clkdev.h>
>>>>> #include <linux/of.h>
>>>>> #include <linux/of_address.h>
>>>>> +#include <linux/syscore_ops.h>
>>>>> #include <linux/delay.h>
>>>>> #include <linux/export.h>
>>>>> #include <linux/mutex.h>
>>>>> @@ -220,11 +221,15 @@
>>>>> #define CLK_M_DIVISOR_SHIFT 2
>>>>> #define CLK_M_DIVISOR_MASK 0x3
>>>>> +#define CLK_MASK_ARM 0x44
>>>>> +#define MISC_CLK_ENB 0x48
>>>>> +
>>>>> #define RST_DFLL_DVCO 0x2f4
>>>>> #define DVFS_DFLL_RESET_SHIFT 0
>>>>> #define CLK_RST_CONTROLLER_RST_DEV_Y_SET 0x2a8
>>>>> #define CLK_RST_CONTROLLER_RST_DEV_Y_CLR 0x2ac
>>>>> +#define CPU_SOFTRST_CTRL 0x380
>>>>> #define LVL2_CLK_GATE_OVRA 0xf8
>>>>> #define LVL2_CLK_GATE_OVRC 0x3a0
>>>>> @@ -2825,6 +2830,7 @@ static int tegra210_enable_pllu(void)
>>>>> struct tegra_clk_pll_freq_table *fentry;
>>>>> struct tegra_clk_pll pllu;
>>>>> u32 reg;
>>>>> + int ret;
>>>>> for (fentry = pll_u_freq_table; fentry->input_rate;
>>>>> fentry++) {
>>>>> if (fentry->input_rate == pll_ref_freq)
>>>>> @@ -2853,9 +2859,8 @@ static int tegra210_enable_pllu(void)
>>>>> reg |= PLL_ENABLE;
>>>>> writel(reg, clk_base + PLLU_BASE);
>>>>> - readl_relaxed_poll_timeout_atomic(clk_base + PLLU_BASE, reg,
>>>>> - reg & PLL_BASE_LOCK, 2, 1000);
>>>>> - if (!(reg & PLL_BASE_LOCK)) {
>>>>> + ret = tegra210_wait_for_mask(&pllu, PLLU_BASE, PLL_BASE_LOCK);
>>>>> + if (ret) {
>>>> Why this is needed? Was there a bug?
>>>>
>>> during resume pllu init is needed and to use same terga210_init_pllu,
>>> poll_timeout_atomic can't be used as its ony for atomic context.
>>>
>>> So changed to use wait_for_mask which should work in both cases.
>> Atomic variant could be used from any context, not sure what do you
>> mean. The 'atomic' part only means that function won't cause scheduling
>> and that's it.
>
> Sorry, replied incorrect. readx_poll_timeout_atomic uses ktime_get() and
> during resume timekeeping suspend/resume happens later than clock
> suspend/resume. So using tegra210_wait_for_mask.
>
> both timekeeping and clk-tegra210 drivers are registered as syscore but
> not ordered.
Okay, thank you for the clarification.
[snip]
^ permalink raw reply
* Re: [PATCH V6 14/21] clk: tegra210: Add suspend and resume support
From: Dmitry Osipenko @ 2019-07-22 7:12 UTC (permalink / raw)
To: Sowjanya Komatineni, thierry.reding, jonathanh, tglx, jason,
marc.zyngier, linus.walleij, stefan, mark.rutland
Cc: pdeschrijver, pgaikwad, sboyd, linux-clk, linux-gpio, jckuo,
josephl, talho, linux-tegra, linux-kernel, mperttunen, spatra,
robh+dt, devicetree
In-Reply-To: <5054f178-db27-9286-d123-3e2b2a885717@gmail.com>
22.07.2019 10:09, Dmitry Osipenko пишет:
> 22.07.2019 9:52, Sowjanya Komatineni пишет:
>>
>> On 7/21/19 11:10 PM, Dmitry Osipenko wrote:
>>> 22.07.2019 1:45, Sowjanya Komatineni пишет:
>>>> On 7/21/19 2:38 PM, Dmitry Osipenko wrote:
>>>>> 21.07.2019 22:40, Sowjanya Komatineni пишет:
>>>>>> This patch adds support for clk: tegra210: suspend-resume.
>>>>>>
>>>>>> All the CAR controller settings are lost on suspend when core
>>>>>> power goes off.
>>>>>>
>>>>>> This patch has implementation for saving and restoring all PLLs
>>>>>> and clocks context during system suspend and resume to have the
>>>>>> clocks back to same state for normal operation.
>>>>>>
>>>>>> Acked-by: Thierry Reding <treding@nvidia.com>
>>>>>> Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
>>>>>> ---
>>>>>> drivers/clk/tegra/clk-tegra210.c | 68
>>>>>> ++++++++++++++++++++++++++++++++++++++--
>>>>>> drivers/clk/tegra/clk.c | 14 +++++++++
>>>>>> drivers/clk/tegra/clk.h | 1 +
>>>>>> 3 files changed, 80 insertions(+), 3 deletions(-)
>>>>>>
>>>>>> diff --git a/drivers/clk/tegra/clk-tegra210.c
>>>>>> b/drivers/clk/tegra/clk-tegra210.c
>>>>>> index 55a88c0824a5..68271873acc1 100644
>>>>>> --- a/drivers/clk/tegra/clk-tegra210.c
>>>>>> +++ b/drivers/clk/tegra/clk-tegra210.c
>>>>>> @@ -9,6 +9,7 @@
>>>>>> #include <linux/clkdev.h>
>>>>>> #include <linux/of.h>
>>>>>> #include <linux/of_address.h>
>>>>>> +#include <linux/syscore_ops.h>
>>>>>> #include <linux/delay.h>
>>>>>> #include <linux/export.h>
>>>>>> #include <linux/mutex.h>
>>>>>> @@ -220,11 +221,15 @@
>>>>>> #define CLK_M_DIVISOR_SHIFT 2
>>>>>> #define CLK_M_DIVISOR_MASK 0x3
>>>>>> +#define CLK_MASK_ARM 0x44
>>>>>> +#define MISC_CLK_ENB 0x48
>>>>>> +
>>>>>> #define RST_DFLL_DVCO 0x2f4
>>>>>> #define DVFS_DFLL_RESET_SHIFT 0
>>>>>> #define CLK_RST_CONTROLLER_RST_DEV_Y_SET 0x2a8
>>>>>> #define CLK_RST_CONTROLLER_RST_DEV_Y_CLR 0x2ac
>>>>>> +#define CPU_SOFTRST_CTRL 0x380
>>>>>> #define LVL2_CLK_GATE_OVRA 0xf8
>>>>>> #define LVL2_CLK_GATE_OVRC 0x3a0
>>>>>> @@ -2825,6 +2830,7 @@ static int tegra210_enable_pllu(void)
>>>>>> struct tegra_clk_pll_freq_table *fentry;
>>>>>> struct tegra_clk_pll pllu;
>>>>>> u32 reg;
>>>>>> + int ret;
>>>>>> for (fentry = pll_u_freq_table; fentry->input_rate;
>>>>>> fentry++) {
>>>>>> if (fentry->input_rate == pll_ref_freq)
>>>>>> @@ -2853,9 +2859,8 @@ static int tegra210_enable_pllu(void)
>>>>>> reg |= PLL_ENABLE;
>>>>>> writel(reg, clk_base + PLLU_BASE);
>>>>>> - readl_relaxed_poll_timeout_atomic(clk_base + PLLU_BASE, reg,
>>>>>> - reg & PLL_BASE_LOCK, 2, 1000);
>>>>>> - if (!(reg & PLL_BASE_LOCK)) {
>>>>>> + ret = tegra210_wait_for_mask(&pllu, PLLU_BASE, PLL_BASE_LOCK);
>>>>>> + if (ret) {
>>>>> Why this is needed? Was there a bug?
>>>>>
>>>> during resume pllu init is needed and to use same terga210_init_pllu,
>>>> poll_timeout_atomic can't be used as its ony for atomic context.
>>>>
>>>> So changed to use wait_for_mask which should work in both cases.
>>> Atomic variant could be used from any context, not sure what do you
>>> mean. The 'atomic' part only means that function won't cause scheduling
>>> and that's it.
>>
>> Sorry, replied incorrect. readx_poll_timeout_atomic uses ktime_get() and
>> during resume timekeeping suspend/resume happens later than clock
>> suspend/resume. So using tegra210_wait_for_mask.
>>
>> both timekeeping and clk-tegra210 drivers are registered as syscore but
>> not ordered.
>
> Okay, thank you for the clarification.
>
> [snip]
>
You should remove the 'iopoll.h' then, since it's not used anymore.
^ permalink raw reply
* Re: [PATCH V6 09/21] clk: tegra: clk-super: Fix to enable PLLP branches to CPU
From: Sowjanya Komatineni @ 2019-07-22 7:12 UTC (permalink / raw)
To: Dmitry Osipenko, thierry.reding, jonathanh, tglx, jason,
marc.zyngier, linus.walleij, stefan, mark.rutland
Cc: pdeschrijver, pgaikwad, sboyd, linux-clk, linux-gpio, jckuo,
josephl, talho, linux-tegra, linux-kernel, mperttunen, spatra,
robh+dt, devicetree
In-Reply-To: <f6ac50af-c3a5-1fef-2e0d-a9ecadeb2495@gmail.com>
On 7/21/19 11:32 PM, Dmitry Osipenko wrote:
> 22.07.2019 6:17, Sowjanya Komatineni пишет:
>> On 7/21/19 3:39 PM, Sowjanya Komatineni wrote:
>>> On 7/21/19 2:16 PM, Dmitry Osipenko wrote:
>>>> 21.07.2019 22:40, Sowjanya Komatineni пишет:
>>>>> This patch has a fix to enable PLLP branches to CPU before changing
>>>>> the CPU clusters clock source to PLLP for Gen5 Super clock.
>>>>>
>>>>> During system suspend entry and exit, CPU source will be switched
>>>>> to PLLP and this needs PLLP branches to be enabled to CPU prior to
>>>>> the switch.
>>>>>
>>>>> On system resume, warmboot code enables PLLP branches to CPU and
>>>>> powers up the CPU with PLLP clock source.
>>>>>
>>>>> Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
>>>>> ---
>>>>> drivers/clk/tegra/clk-super.c | 11 +++++++++++
>>>>> drivers/clk/tegra/clk-tegra-super-gen4.c | 4 ++--
>>>>> drivers/clk/tegra/clk.h | 4 ++++
>>>>> 3 files changed, 17 insertions(+), 2 deletions(-)
>>>>>
>>>>> diff --git a/drivers/clk/tegra/clk-super.c
>>>>> b/drivers/clk/tegra/clk-super.c
>>>>> index 39ef31b46df5..d73c587e4853 100644
>>>>> --- a/drivers/clk/tegra/clk-super.c
>>>>> +++ b/drivers/clk/tegra/clk-super.c
>>>>> @@ -28,6 +28,9 @@
>>>>> #define super_state_to_src_shift(m, s) ((m->width * s))
>>>>> #define super_state_to_src_mask(m) (((1 << m->width) - 1))
>>>>> +#define CCLK_SRC_PLLP_OUT0 4
>>>>> +#define CCLK_SRC_PLLP_OUT4 5
>>>>> +
>>>>> static u8 clk_super_get_parent(struct clk_hw *hw)
>>>>> {
>>>>> struct tegra_clk_super_mux *mux = to_clk_super_mux(hw);
>>>>> @@ -97,6 +100,14 @@ static int clk_super_set_parent(struct clk_hw
>>>>> *hw, u8 index)
>>>>> if (index == mux->div2_index)
>>>>> index = mux->pllx_index;
>>>>> }
>>>>> +
>>>>> + /*
>>>>> + * Enable PLLP branches to CPU before selecting PLLP source
>>>>> + */
>>>>> + if ((mux->flags & TEGRA_CPU_CLK) &&
>>>>> + ((index == CCLK_SRC_PLLP_OUT0) || (index ==
>>>>> CCLK_SRC_PLLP_OUT4)))
>>>>> + tegra_clk_set_pllp_out_cpu(true);
>>>> Should somewhere here be tegra_clk_set_pllp_out_cpu(false) when
>>>> switching from PLLP?
>>> PLLP may be used for other CPU clusters.
>> Though to avoid flag and check needed to make sure other CPU is not
>> using before disabling PLLP branch to CPU.
>>
>> But leaving it enabled shouldn't impact much as clock source mux is
>> after this in design anyway.
>>
>> But can add as well if its clear that way.
> The TRM doc says "The CPU subsystem supports a switch-cluster mode
> meaning that only one of the clusters can be active at any given time".
>
> Given that cluster-switching isn't supported in upstream, I don't think
> that you need to care about the other cluster at all, at least for now.
>
> The cluster-switching implementation in upstream is very complicated
> because it requires a special "hotplugging" CPU governor, which
> apparently no other platform needs.
>
> [snip]
This patch enables PLLP branches to CPU for both CPUG & CPULP if they
use PLLP source.
So, to disable PLLP out CPU when not in use, we still need check for
other cluster because during resume both LP CPU and G CPU gets restored.
CPUG runs from PLLP on resume and when it does super clk restore for LP
CPU which may not be using PLLP, but as both uses same super mux
clk_ops, without check (for PLLP branch to CPU in use) disabling PLLP
branch to CPU during LP CPU restore looses clock to CPU G as well which
is running from PLLP.
Will add check and disable PLLP if not in use in next version... this
need extern flag as well to mark PLLP usage with either of CPU's.
^ permalink raw reply
* Re: [PATCH V6 09/21] clk: tegra: clk-super: Fix to enable PLLP branches to CPU
From: Dmitry Osipenko @ 2019-07-22 7:17 UTC (permalink / raw)
To: Sowjanya Komatineni, thierry.reding, jonathanh, tglx, jason,
marc.zyngier, linus.walleij, stefan, mark.rutland
Cc: pdeschrijver, pgaikwad, sboyd, linux-clk, linux-gpio, jckuo,
josephl, talho, linux-tegra, linux-kernel, mperttunen, spatra,
robh+dt, devicetree
In-Reply-To: <d9bbe208-6cd3-6a28-3e43-fdd566699b1d@nvidia.com>
22.07.2019 10:12, Sowjanya Komatineni пишет:
>
> On 7/21/19 11:32 PM, Dmitry Osipenko wrote:
>> 22.07.2019 6:17, Sowjanya Komatineni пишет:
>>> On 7/21/19 3:39 PM, Sowjanya Komatineni wrote:
>>>> On 7/21/19 2:16 PM, Dmitry Osipenko wrote:
>>>>> 21.07.2019 22:40, Sowjanya Komatineni пишет:
>>>>>> This patch has a fix to enable PLLP branches to CPU before changing
>>>>>> the CPU clusters clock source to PLLP for Gen5 Super clock.
>>>>>>
>>>>>> During system suspend entry and exit, CPU source will be switched
>>>>>> to PLLP and this needs PLLP branches to be enabled to CPU prior to
>>>>>> the switch.
>>>>>>
>>>>>> On system resume, warmboot code enables PLLP branches to CPU and
>>>>>> powers up the CPU with PLLP clock source.
>>>>>>
>>>>>> Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
>>>>>> ---
>>>>>> drivers/clk/tegra/clk-super.c | 11 +++++++++++
>>>>>> drivers/clk/tegra/clk-tegra-super-gen4.c | 4 ++--
>>>>>> drivers/clk/tegra/clk.h | 4 ++++
>>>>>> 3 files changed, 17 insertions(+), 2 deletions(-)
>>>>>>
>>>>>> diff --git a/drivers/clk/tegra/clk-super.c
>>>>>> b/drivers/clk/tegra/clk-super.c
>>>>>> index 39ef31b46df5..d73c587e4853 100644
>>>>>> --- a/drivers/clk/tegra/clk-super.c
>>>>>> +++ b/drivers/clk/tegra/clk-super.c
>>>>>> @@ -28,6 +28,9 @@
>>>>>> #define super_state_to_src_shift(m, s) ((m->width * s))
>>>>>> #define super_state_to_src_mask(m) (((1 << m->width) - 1))
>>>>>> +#define CCLK_SRC_PLLP_OUT0 4
>>>>>> +#define CCLK_SRC_PLLP_OUT4 5
>>>>>> +
>>>>>> static u8 clk_super_get_parent(struct clk_hw *hw)
>>>>>> {
>>>>>> struct tegra_clk_super_mux *mux = to_clk_super_mux(hw);
>>>>>> @@ -97,6 +100,14 @@ static int clk_super_set_parent(struct clk_hw
>>>>>> *hw, u8 index)
>>>>>> if (index == mux->div2_index)
>>>>>> index = mux->pllx_index;
>>>>>> }
>>>>>> +
>>>>>> + /*
>>>>>> + * Enable PLLP branches to CPU before selecting PLLP source
>>>>>> + */
>>>>>> + if ((mux->flags & TEGRA_CPU_CLK) &&
>>>>>> + ((index == CCLK_SRC_PLLP_OUT0) || (index ==
>>>>>> CCLK_SRC_PLLP_OUT4)))
>>>>>> + tegra_clk_set_pllp_out_cpu(true);
>>>>> Should somewhere here be tegra_clk_set_pllp_out_cpu(false) when
>>>>> switching from PLLP?
>>>> PLLP may be used for other CPU clusters.
>>> Though to avoid flag and check needed to make sure other CPU is not
>>> using before disabling PLLP branch to CPU.
>>>
>>> But leaving it enabled shouldn't impact much as clock source mux is
>>> after this in design anyway.
>>>
>>> But can add as well if its clear that way.
>> The TRM doc says "The CPU subsystem supports a switch-cluster mode
>> meaning that only one of the clusters can be active at any given time".
>>
>> Given that cluster-switching isn't supported in upstream, I don't think
>> that you need to care about the other cluster at all, at least for now.
>>
>> The cluster-switching implementation in upstream is very complicated
>> because it requires a special "hotplugging" CPU governor, which
>> apparently no other platform needs.
>>
>> [snip]
>
> This patch enables PLLP branches to CPU for both CPUG & CPULP if they
> use PLLP source.
>
> So, to disable PLLP out CPU when not in use, we still need check for
> other cluster because during resume both LP CPU and G CPU gets restored.
> CPUG runs from PLLP on resume and when it does super clk restore for LP
> CPU which may not be using PLLP, but as both uses same super mux
> clk_ops, without check (for PLLP branch to CPU in use) disabling PLLP
> branch to CPU during LP CPU restore looses clock to CPU G as well which
> is running from PLLP.
>
> Will add check and disable PLLP if not in use in next version... this
> need extern flag as well to mark PLLP usage with either of CPU's.
I still don't understand why do you need to care about LP cluster at
all, given that it's always in a power-gated state.
^ permalink raw reply
* Re: [PATCH 2/2] ARM: dts: opos6ul/opos6uldev: rework device tree to support i.MX6ULL
From: Shawn Guo @ 2019-07-22 7:19 UTC (permalink / raw)
To: Sébastien Szymanski
Cc: Mark Rutland, devicetree, Sascha Hauer, Rob Herring,
NXP Linux Team, Pengutronix Kernel Team, Fabio Estevam,
linux-arm-kernel
In-Reply-To: <20190704142324.17675-2-sebastien.szymanski@armadeus.com>
On Thu, Jul 04, 2019 at 04:23:24PM +0200, Sébastien Szymanski wrote:
> Rework the device trees of the OPOS6UL and OPOS6ULDev boards to support
> the OPOS6UL SoM with an i.MX6ULL SoC. The device trees are now as
> following:
> - imx6ul-imx6ull-opos6ul.dtsi
> - imx6ul-opos6ul.dtsi
> - imx6ull-opos6ul.dtsi
> - imx6ul-imx6ull-opos6uldev.dtsi
> - imx6ul-opos6uldev.dts
> - imx6ull-opos6uldev.dts
Can you please explain a bit how this complex file hierarchy is created?
>
> Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
> ---
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/imx6ul-imx6ull-opos6ul.dtsi | 148 +++++++
> .../boot/dts/imx6ul-imx6ull-opos6uldev.dtsi | 338 ++++++++++++++++
> arch/arm/boot/dts/imx6ul-opos6ul.dtsi | 195 +--------
> arch/arm/boot/dts/imx6ul-opos6uldev.dts | 380 +-----------------
> arch/arm/boot/dts/imx6ull-opos6ul.dtsi | 6 +
> arch/arm/boot/dts/imx6ull-opos6uldev.dts | 42 ++
> 7 files changed, 546 insertions(+), 564 deletions(-)
> create mode 100644 arch/arm/boot/dts/imx6ul-imx6ull-opos6ul.dtsi
> create mode 100644 arch/arm/boot/dts/imx6ul-imx6ull-opos6uldev.dtsi
> create mode 100644 arch/arm/boot/dts/imx6ull-opos6ul.dtsi
> create mode 100644 arch/arm/boot/dts/imx6ull-opos6uldev.dts
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index dab2914fa293..e2ee3322c47c 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -580,6 +580,7 @@ dtb-$(CONFIG_SOC_IMX6UL) += \
> imx6ull-14x14-evk.dtb \
> imx6ull-colibri-eval-v3.dtb \
> imx6ull-colibri-wifi-eval-v3.dtb \
> + imx6ull-opos6uldev.dtb \
> imx6ulz-14x14-evk.dtb
> dtb-$(CONFIG_SOC_IMX7D) += \
> imx7d-cl-som-imx7.dtb \
> diff --git a/arch/arm/boot/dts/imx6ul-imx6ull-opos6ul.dtsi b/arch/arm/boot/dts/imx6ul-imx6ull-opos6ul.dtsi
> new file mode 100644
> index 000000000000..50af2f571800
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx6ul-imx6ull-opos6ul.dtsi
> @@ -0,0 +1,148 @@
> +// SPDX-License-Identifier: GPL-2.0 OR X11
DT maintainer prefer to MIT over X11.
> +//
> +// Copyright 2019 Armadeus Systems <support@armadeus.com>
> +
> +/ {
> + memory@80000000 {
> + device_type = "memory";
> + reg = <0x80000000 0>; /* will be filled by U-Boot */
> + };
> +
> + reg_3v3: regulator-3v3 {
> + compatible = "regulator-fixed";
> + regulator-name = "3V3";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + };
> +
> + usdhc3_pwrseq: usdhc3-pwrseq {
> + compatible = "mmc-pwrseq-simple";
> + reset-gpios = <&gpio2 9 GPIO_ACTIVE_LOW>;
> + };
> +};
> +
> +&fec1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_enet1>;
> + phy-mode = "rmii";
> + phy-reset-duration = <1>;
> + phy-reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
> + phy-handle = <ðphy1>;
> + phy-supply = <®_3v3>;
> + status = "okay";
> +
> + mdio: mdio {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + ethphy1: ethernet-phy@1 {
> + compatible = "ethernet-phy-ieee802.3-c22";
> + reg = <1>;
> + interrupt-parent = <&gpio4>;
> + interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
> + status = "okay";
> + };
> + };
> +};
> +
> +/* Bluetooth */
> +&uart8 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_uart8>;
> + uart-has-rtscts;
> + status = "okay";
> +};
> +
> +/* eMMC */
> +&usdhc1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_usdhc1>;
> + bus-width = <8>;
> + no-1-8-v;
> + non-removable;
> + status = "okay";
> +};
> +
> +/* WiFi */
> +&usdhc2 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_usdhc2>;
> + bus-width = <4>;
> + no-1-8-v;
> + non-removable;
> + mmc-pwrseq = <&usdhc3_pwrseq>;
> + status = "okay";
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + brcmf: wifi@1 {
> + compatible = "brcm,bcm4329-fmac";
> + reg = <1>;
> + interrupt-parent = <&gpio2>;
> + interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
> + interrupt-names = "host-wake";
> + };
> +};
> +
> +&iomuxc {
> + pinctrl_enet1: enet1grp {
> + fsl,pins = <
> + MX6UL_PAD_GPIO1_IO06__ENET1_MDIO 0x1b0b0
> + MX6UL_PAD_GPIO1_IO07__ENET1_MDC 0x1b0b0
> + MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER 0x130b0
> + MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x130b0
> + MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x130b0
> + MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x130b0
> + MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0
> + MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0
> + MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b0b0
> + /* INT# */
> + MX6UL_PAD_NAND_DQS__GPIO4_IO16 0x1b0b0
> + /* RST# */
> + MX6UL_PAD_NAND_DATA00__GPIO4_IO02 0x130b0
> + MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x4001b031
> + >;
> + };
> +
> + pinctrl_uart8: uart8grp {
> + fsl,pins = <
> + MX6UL_PAD_ENET2_TX_EN__UART8_DCE_RX 0x1b0b0
> + MX6UL_PAD_ENET2_TX_DATA1__UART8_DCE_TX 0x1b0b0
> + MX6UL_PAD_ENET2_RX_ER__UART8_DCE_RTS 0x1b0b0
> + MX6UL_PAD_ENET2_TX_CLK__UART8_DCE_CTS 0x1b0b0
> + /* BT_REG_ON */
> + MX6UL_PAD_ENET2_RX_EN__GPIO2_IO10 0x130b0
> + >;
> + };
> +
> + pinctrl_usdhc1: usdhc1grp {
> + fsl,pins = <
> + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059
> + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10059
> + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059
> + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059
> + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059
> + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059
> + MX6UL_PAD_NAND_READY_B__USDHC1_DATA4 0x17059
> + MX6UL_PAD_NAND_CE0_B__USDHC1_DATA5 0x17059
> + MX6UL_PAD_NAND_CE1_B__USDHC1_DATA6 0x17059
> + MX6UL_PAD_NAND_CLE__USDHC1_DATA7 0x17059
> + >;
> + };
> +
> + pinctrl_usdhc2: usdhc2grp {
> + fsl,pins = <
> + MX6UL_PAD_LCD_DATA18__USDHC2_CMD 0x1b0b0
> + MX6UL_PAD_LCD_DATA19__USDHC2_CLK 0x100b0
> + MX6UL_PAD_LCD_DATA20__USDHC2_DATA0 0x1b0b0
> + MX6UL_PAD_LCD_DATA21__USDHC2_DATA1 0x1b0b0
> + MX6UL_PAD_LCD_DATA22__USDHC2_DATA2 0x1b0b0
> + MX6UL_PAD_LCD_DATA23__USDHC2_DATA3 0x1b0b0
> + /* WL_REG_ON */
> + MX6UL_PAD_ENET2_RX_DATA1__GPIO2_IO09 0x130b0
> + /* WL_IRQ */
> + MX6UL_PAD_ENET2_RX_DATA0__GPIO2_IO08 0x1b0b0
> + >;
> + };
> +};
> diff --git a/arch/arm/boot/dts/imx6ul-imx6ull-opos6uldev.dtsi b/arch/arm/boot/dts/imx6ul-imx6ull-opos6uldev.dtsi
> new file mode 100644
> index 000000000000..350b7000fad2
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx6ul-imx6ull-opos6uldev.dtsi
> @@ -0,0 +1,338 @@
> +// SPDX-License-Identifier: GPL-2.0 OR X11
> +//
> +// Copyright 2019 Armadeus Systems <support@armadeus.com>
> +
> +/ {
> + chosen {
> + stdout-path = &uart1;
> + };
> +
> + backlight: backlight {
> + compatible = "pwm-backlight";
> + pwms = <&pwm3 0 191000>;
> + brightness-levels = <0 4 8 16 32 64 128 255>;
> + default-brightness-level = <7>;
> + power-supply = <®_5v>;
> + status = "okay";
> + };
> +
> + gpio-keys {
> + compatible = "gpio-keys";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_gpio_keys>;
> +
> + user-button {
> + label = "User button";
> + gpios = <&gpio2 11 GPIO_ACTIVE_LOW>;
> + linux,code = <BTN_MISC>;
> + wakeup-source;
> + };
> + };
> +
> + leds {
> + compatible = "gpio-leds";
> +
> + user-led {
> + label = "User";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_led>;
> + gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>;
> + linux,default-trigger = "heartbeat";
> + };
> + };
> +
> + onewire {
> + compatible = "w1-gpio";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_w1>;
> + gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
> + };
> +
> + panel: panel {
> + compatible = "armadeus,st0700-adapt";
> + power-supply = <®_3v3>;
> + backlight = <&backlight>;
> +
> + port {
> + panel_in: endpoint {
> + remote-endpoint = <&lcdif_out>;
> + };
> + };
> + };
> +
> + reg_5v: regulator-5v {
> + compatible = "regulator-fixed";
> + regulator-name = "5V";
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + };
> +
> + reg_usbotg1_vbus: regulator-usbotg1vbus {
> + compatible = "regulator-fixed";
> + regulator-name = "usbotg1vbus";
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_usbotg1_vbus>;
> + gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
> + enable-active-high;
> + };
> +
> + reg_usbotg2_vbus: regulator-usbotg2vbus {
> + compatible = "regulator-fixed";
> + regulator-name = "usbotg2vbus";
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_usbotg2_vbus>;
> + gpio = <&gpio5 9 GPIO_ACTIVE_HIGH>;
> + enable-active-high;
> + };
> +};
> +
> +&adc1 {
> + vref-supply = <®_3v3>;
> + status = "okay";
> +};
> +
> +&can1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_flexcan1>;
> + xceiver-supply = <®_5v>;
> + status = "okay";
> +};
> +
> +&can2 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_flexcan2>;
> + xceiver-supply = <®_5v>;
> + status = "okay";
> +};
> +
> +&ecspi4 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_ecspi4>;
> + cs-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>, <&gpio4 3 GPIO_ACTIVE_LOW>;
> + status = "okay";
> +
> + spidev0: spi@0 {
> + compatible = "spidev";
> + reg = <0>;
> + spi-max-frequency = <5000000>;
> + };
> +
> + spidev1: spi@1 {
> + compatible = "spidev";
> + reg = <1>;
> + spi-max-frequency = <5000000>;
> + };
> +};
> +
> +&i2c1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_i2c1>;
> + clock-frequency = <400000>;
> + status = "okay";
> +};
> +
> +&i2c2 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_i2c2>;
> + clock-frequency = <400000>;
> + status = "okay";
> +};
> +
> +&lcdif {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_lcdif>;
> + status = "okay";
> +
> + port {
> + lcdif_out: endpoint {
> + remote-endpoint = <&panel_in>;
> + };
> + };
> +};
> +
> +&pwm3 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_pwm3>;
> + status = "okay";
> +};
> +
> +&snvs_pwrkey {
> + status = "disabled";
> +};
> +
> +&tsc {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_tsc>;
> + xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>;
> + measure-delay-time = <0xffff>;
> + pre-charge-time = <0xffff>;
> + status = "okay";
> +};
> +
> +&uart1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_uart1>;
> + status = "okay";
> +};
> +
> +&uart2 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_uart2>;
> + status = "okay";
> +};
> +
> +&usbotg1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_usbotg1_id>;
> + vbus-supply = <®_usbotg1_vbus>;
> + dr_mode = "otg";
> + disable-over-current;
> + status = "okay";
> +};
> +
> +&usbotg2 {
> + vbus-supply = <®_usbotg2_vbus>;
> + dr_mode = "host";
> + disable-over-current;
> + status = "okay";
> +};
> +
> +&iomuxc {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_gpios>;
> +
> + pinctrl_ecspi4: ecspi4grp {
> + fsl,pins = <
> + MX6UL_PAD_NAND_DATA04__ECSPI4_SCLK 0x1b0b0
> + MX6UL_PAD_NAND_DATA05__ECSPI4_MOSI 0x1b0b0
> + MX6UL_PAD_NAND_DATA06__ECSPI4_MISO 0x1b0b0
> + MX6UL_PAD_NAND_DATA01__GPIO4_IO03 0x1b0b0
> + MX6UL_PAD_NAND_DATA07__GPIO4_IO09 0x1b0b0
> + >;
> + };
> +
> + pinctrl_flexcan1: flexcan1grp {
> + fsl,pins = <
> + MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX 0x0b0b0
> + MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX 0x0b0b0
> + >;
> + };
> +
> + pinctrl_flexcan2: flexcan2grp {
> + fsl,pins = <
> + MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX 0x0b0b0
> + MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX 0x0b0b0
> + >;
> + };
> +
> + pinctrl_gpios: gpiosgrp {
> + fsl,pins = <
> + MX6UL_PAD_GPIO1_IO09__GPIO1_IO09 0x0b0b0
> + MX6UL_PAD_UART3_RX_DATA__GPIO1_IO25 0x0b0b0
> + MX6UL_PAD_UART3_TX_DATA__GPIO1_IO24 0x0b0b0
> + MX6UL_PAD_NAND_RE_B__GPIO4_IO00 0x0b0b0
> + MX6UL_PAD_GPIO1_IO08__GPIO1_IO08 0x0b0b0
> + MX6UL_PAD_UART1_CTS_B__GPIO1_IO18 0x0b0b0
> + MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x0b0b0
> + MX6UL_PAD_NAND_WE_B__GPIO4_IO01 0x0b0b0
> + >;
> + };
> +
> + pinctrl_gpio_keys: gpiokeysgrp {
> + fsl,pins = <
> + MX6UL_PAD_ENET2_TX_DATA0__GPIO2_IO11 0x0b0b0
> + >;
> + };
> +
> + pinctrl_i2c1: i2c1grp {
> + fsl,pins = <
> + MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0
> + MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0
> + >;
> + };
> +
> + pinctrl_i2c2: i2c2grp {
> + fsl,pins = <
> + MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x4001b8b0
> + MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x4001b8b0
> + >;
> + };
> +
> + pinctrl_lcdif: lcdifgrp {
> + fsl,pins = <
> + MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x100b1
> + MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x100b1
> + MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC 0x100b1
> + MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC 0x100b1
> + MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x100b1
> + MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x100b1
> + MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x100b1
> + MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x100b1
> + MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x100b1
> + MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x100b1
> + MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x100b1
> + MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x100b1
> + MX6UL_PAD_LCD_DATA08__LCDIF_DATA08 0x100b1
> + MX6UL_PAD_LCD_DATA09__LCDIF_DATA09 0x100b1
> + MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x100b1
> + MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x100b1
> + MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x100b1
> + MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x100b1
> + MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x100b1
> + MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x100b1
> + MX6UL_PAD_LCD_DATA16__LCDIF_DATA16 0x100b1
> + MX6UL_PAD_LCD_DATA17__LCDIF_DATA17 0x100b1
> + >;
> + };
> +
> + pinctrl_led: ledgrp {
> + fsl,pins = <
> + MX6UL_PAD_LCD_RESET__GPIO3_IO04 0x0b0b0
> + >;
> + };
> +
> + pinctrl_pwm3: pwm3grp {
> + fsl,pins = <
> + MX6UL_PAD_NAND_ALE__PWM3_OUT 0x1b0b0
> + >;
> + };
> +
> + pinctrl_tsc: tscgrp {
> + fsl,pins = <
> + MX6UL_PAD_GPIO1_IO01__GPIO1_IO01 0xb0
> + MX6UL_PAD_GPIO1_IO02__GPIO1_IO02 0xb0
> + MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0xb0
> + MX6UL_PAD_GPIO1_IO04__GPIO1_IO04 0xb0
> + >;
> + };
> +
> + pinctrl_uart1: uart1grp {
> + fsl,pins = <
> + MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1
> + MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1
> + >;
> + };
> +
> + pinctrl_uart2: uart2grp {
> + fsl,pins = <
> + MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX 0x1b0b1
> + MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX 0x1b0b1
> + >;
> + };
> +
> + pinctrl_usbotg1_id: usbotg1idgrp {
> + fsl,pins = <
> + MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID 0x1b0b0
> + >;
> + };
> +
> + pinctrl_usbotg1_vbus: usbotg1vbusgrp {
> + fsl,pins = <
> + MX6UL_PAD_GPIO1_IO05__GPIO1_IO05 0x1b0b0
> + >;
> + };
> +};
> diff --git a/arch/arm/boot/dts/imx6ul-opos6ul.dtsi b/arch/arm/boot/dts/imx6ul-opos6ul.dtsi
> index cf7faf4b9c47..ee11c3474aef 100644
> --- a/arch/arm/boot/dts/imx6ul-opos6ul.dtsi
> +++ b/arch/arm/boot/dts/imx6ul-opos6ul.dtsi
> @@ -1,193 +1,6 @@
> -/*
> - * Copyright 2017 Armadeus Systems <support@armadeus.com>
> - *
> - * This file is dual-licensed: you can use it either under the terms
> - * of the GPL or the X11 license, at your option. Note that this dual
> - * licensing only applies to this file, and not this project as a
> - * whole.
> - *
> - * a) This file is free software; you can redistribute it and/or
> - * modify it under the terms of the GNU General Public License as
> - * published by the Free Software Foundation; either version 2 of
> - * the License, or (at your option) any later version.
> - *
> - * This file is distributed in the hope that it will be useful,
> - * but WITHOUT ANY WARRANTY; without even the implied warranty of
> - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> - * GNU General Public License for more details.
> - *
> - * You should have received a copy of the GNU General Public
> - * License along with this file; if not, write to the Free
> - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
> - * MA 02110-1301 USA
> - *
> - * Or, alternatively,
> - *
> - * b) Permission is hereby granted, free of charge, to any person
> - * obtaining a copy of this software and associated documentation
> - * files (the "Software"), to deal in the Software without
> - * restriction, including without limitation the rights to use,
> - * copy, modify, merge, publish, distribute, sublicense, and/or
> - * sell copies of the Software, and to permit persons to whom the
> - * Software is furnished to do so, subject to the following
> - * conditions:
> - *
> - * The above copyright notice and this permission notice shall be
> - * included in all copies or substantial portions of the Software.
> - *
> - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> - * OTHER DEALINGS IN THE SOFTWARE.
> - */
> +// SPDX-License-Identifier: GPL-2.0 OR X11
> +//
> +// Copyright 2017 Armadeus Systems <support@armadeus.com>
>
> #include "imx6ul.dtsi"
> -
> -/ {
> - memory@80000000 {
> - device_type = "memory";
> - reg = <0x80000000 0>; /* will be filled by U-Boot */
> - };
> -
> - reg_3v3: regulator-3v3 {
> - compatible = "regulator-fixed";
> - regulator-name = "3V3";
> - regulator-min-microvolt = <3300000>;
> - regulator-max-microvolt = <3300000>;
> - };
> -
> - usdhc3_pwrseq: usdhc3-pwrseq {
> - compatible = "mmc-pwrseq-simple";
> - reset-gpios = <&gpio2 9 GPIO_ACTIVE_LOW>;
> - };
> -};
> -
> -&fec1 {
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_enet1>;
> - phy-mode = "rmii";
> - phy-reset-duration = <1>;
> - phy-reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
> - phy-handle = <ðphy1>;
> - phy-supply = <®_3v3>;
> - status = "okay";
> -
> - mdio: mdio {
> - #address-cells = <1>;
> - #size-cells = <0>;
> -
> - ethphy1: ethernet-phy@1 {
> - compatible = "ethernet-phy-ieee802.3-c22";
> - reg = <1>;
> - interrupt-parent = <&gpio4>;
> - interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
> - status = "okay";
> - };
> - };
> -};
> -
> -/* Bluetooth */
> -&uart8 {
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_uart8>;
> - uart-has-rtscts;
> - status = "okay";
> -};
> -
> -/* eMMC */
> -&usdhc1 {
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_usdhc1>;
> - bus-width = <8>;
> - no-1-8-v;
> - non-removable;
> - status = "okay";
> -};
> -
> -/* WiFi */
> -&usdhc2 {
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_usdhc2>;
> - bus-width = <4>;
> - no-1-8-v;
> - non-removable;
> - mmc-pwrseq = <&usdhc3_pwrseq>;
> - status = "okay";
> -
> - #address-cells = <1>;
> - #size-cells = <0>;
> -
> - brcmf: wifi@1 {
> - compatible = "brcm,bcm4329-fmac";
> - reg = <1>;
> - interrupt-parent = <&gpio2>;
> - interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
> - interrupt-names = "host-wake";
> - };
> -};
> -
> -&iomuxc {
> - pinctrl_enet1: enet1grp {
> - fsl,pins = <
> - MX6UL_PAD_GPIO1_IO06__ENET1_MDIO 0x1b0b0
> - MX6UL_PAD_GPIO1_IO07__ENET1_MDC 0x1b0b0
> - MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER 0x130b0
> - MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x130b0
> - MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x130b0
> - MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x130b0
> - MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0
> - MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0
> - MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b0b0
> - /* INT# */
> - MX6UL_PAD_NAND_DQS__GPIO4_IO16 0x1b0b0
> - /* RST# */
> - MX6UL_PAD_NAND_DATA00__GPIO4_IO02 0x130b0
> - MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x4001b031
> - >;
> - };
> -
> - pinctrl_uart8: uart8grp {
> - fsl,pins = <
> - MX6UL_PAD_ENET2_TX_EN__UART8_DCE_RX 0x1b0b0
> - MX6UL_PAD_ENET2_TX_DATA1__UART8_DCE_TX 0x1b0b0
> - MX6UL_PAD_ENET2_RX_ER__UART8_DCE_RTS 0x1b0b0
> - MX6UL_PAD_ENET2_TX_CLK__UART8_DCE_CTS 0x1b0b0
> - /* BT_REG_ON */
> - MX6UL_PAD_ENET2_RX_EN__GPIO2_IO10 0x130b0
> - >;
> - };
> -
> - pinctrl_usdhc1: usdhc1grp {
> - fsl,pins = <
> - MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059
> - MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10059
> - MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059
> - MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059
> - MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059
> - MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059
> - MX6UL_PAD_NAND_READY_B__USDHC1_DATA4 0x17059
> - MX6UL_PAD_NAND_CE0_B__USDHC1_DATA5 0x17059
> - MX6UL_PAD_NAND_CE1_B__USDHC1_DATA6 0x17059
> - MX6UL_PAD_NAND_CLE__USDHC1_DATA7 0x17059
> - >;
> - };
> -
> - pinctrl_usdhc2: usdhc2grp {
> - fsl,pins = <
> - MX6UL_PAD_LCD_DATA18__USDHC2_CMD 0x1b0b0
> - MX6UL_PAD_LCD_DATA19__USDHC2_CLK 0x100b0
> - MX6UL_PAD_LCD_DATA20__USDHC2_DATA0 0x1b0b0
> - MX6UL_PAD_LCD_DATA21__USDHC2_DATA1 0x1b0b0
> - MX6UL_PAD_LCD_DATA22__USDHC2_DATA2 0x1b0b0
> - MX6UL_PAD_LCD_DATA23__USDHC2_DATA3 0x1b0b0
> - /* WL_REG_ON */
> - MX6UL_PAD_ENET2_RX_DATA1__GPIO2_IO09 0x130b0
> - /* WL_IRQ */
> - MX6UL_PAD_ENET2_RX_DATA0__GPIO2_IO08 0x1b0b0
> - >;
> - };
> -};
> +#include "imx6ul-imx6ull-opos6ul.dtsi"
> diff --git a/arch/arm/boot/dts/imx6ul-opos6uldev.dts b/arch/arm/boot/dts/imx6ul-opos6uldev.dts
> index 8ecdb9ad2b2e..44a5f0bce9a7 100644
> --- a/arch/arm/boot/dts/imx6ul-opos6uldev.dts
> +++ b/arch/arm/boot/dts/imx6ul-opos6uldev.dts
> @@ -1,293 +1,21 @@
> -/*
> - * Copyright 2017 Armadeus Systems <support@armadeus.com>
> - *
> - * This file is dual-licensed: you can use it either under the terms
> - * of the GPL or the X11 license, at your option. Note that this dual
> - * licensing only applies to this file, and not this project as a
> - * whole.
> - *
> - * a) This file is free software; you can redistribute it and/or
> - * modify it under the terms of the GNU General Public License as
> - * published by the Free Software Foundation; either version 2 of
> - * the License, or (at your option) any later version.
> - *
> - * This file is distributed in the hope that it will be useful,
> - * but WITHOUT ANY WARRANTY; without even the implied warranty of
> - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> - * GNU General Public License for more details.
> - *
> - * You should have received a copy of the GNU General Public
> - * License along with this file; if not, write to the Free
> - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
> - * MA 02110-1301 USA
> - *
> - * Or, alternatively,
> - *
> - * b) Permission is hereby granted, free of charge, to any person
> - * obtaining a copy of this software and associated documentation
> - * files (the "Software"), to deal in the Software without
> - * restriction, including without limitation the rights to use,
> - * copy, modify, merge, publish, distribute, sublicense, and/or
> - * sell copies of the Software, and to permit persons to whom the
> - * Software is furnished to do so, subject to the following
> - * conditions:
> - *
> - * The above copyright notice and this permission notice shall be
> - * included in all copies or substantial portions of the Software.
> - *
> - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> - * OTHER DEALINGS IN THE SOFTWARE.
> - */
> +// SPDX-License-Identifier: GPL-2.0 OR X11
> +//
> +// Copyright 2017 Armadeus Systems <support@armadeus.com>
>
> /dts-v1/;
> #include "imx6ul-opos6ul.dtsi"
> +#include "imx6ul-imx6ull-opos6uldev.dtsi"
>
> / {
> - model = "Armadeus Systems OPOS6UL SoM on OPOS6ULDev board";
> + model = "Armadeus Systems OPOS6UL SoM (i.MX6UL) on OPOS6ULDev board";
> compatible = "armadeus,opos6uldev", "armadeus,opos6ul", "fsl,imx6ul";
> -
> - chosen {
> - stdout-path = &uart1;
> - };
> -
> - backlight: backlight {
> - compatible = "pwm-backlight";
> - pwms = <&pwm3 0 191000>;
> - brightness-levels = <0 4 8 16 32 64 128 255>;
> - default-brightness-level = <7>;
> - power-supply = <®_5v>;
> - status = "okay";
> - };
> -
> - gpio-keys {
> - compatible = "gpio-keys";
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_gpio_keys>;
> -
> - user-button {
> - label = "User button";
> - gpios = <&gpio2 11 GPIO_ACTIVE_LOW>;
> - linux,code = <BTN_MISC>;
> - wakeup-source;
> - };
> - };
> -
> - leds {
> - compatible = "gpio-leds";
> -
> - user-led {
> - label = "User";
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_led>;
> - gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>;
> - linux,default-trigger = "heartbeat";
> - };
> - };
> -
> - onewire {
> - compatible = "w1-gpio";
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_w1>;
> - gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
> - };
> -
> - panel: panel {
> - compatible = "armadeus,st0700-adapt";
> - power-supply = <®_3v3>;
> - backlight = <&backlight>;
> -
> - port {
> - panel_in: endpoint {
> - remote-endpoint = <&lcdif_out>;
> - };
> - };
> - };
> -
> - reg_5v: regulator-5v {
> - compatible = "regulator-fixed";
> - regulator-name = "5V";
> - regulator-min-microvolt = <5000000>;
> - regulator-max-microvolt = <5000000>;
> - };
> -
> - reg_usbotg1_vbus: regulator-usbotg1vbus {
> - compatible = "regulator-fixed";
> - regulator-name = "usbotg1vbus";
> - regulator-min-microvolt = <5000000>;
> - regulator-max-microvolt = <5000000>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_usbotg1_vbus>;
> - gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
> - enable-active-high;
> - };
> -
> - reg_usbotg2_vbus: regulator-usbotg2vbus {
> - compatible = "regulator-fixed";
> - regulator-name = "usbotg2vbus";
> - regulator-min-microvolt = <5000000>;
> - regulator-max-microvolt = <5000000>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_usbotg2_vbus>;
> - gpio = <&gpio5 9 GPIO_ACTIVE_HIGH>;
> - enable-active-high;
> - };
> -};
> -
> -&adc1 {
> - vref-supply = <®_3v3>;
> - status = "okay";
> -};
> -
> -&can1 {
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_flexcan1>;
> - xceiver-supply = <®_5v>;
> - status = "okay";
> -};
> -
> -&can2 {
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_flexcan2>;
> - xceiver-supply = <®_5v>;
> - status = "okay";
> -};
> -
> -&ecspi4 {
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_ecspi4>;
> - cs-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>, <&gpio4 3 GPIO_ACTIVE_LOW>;
> - status = "okay";
> -
> - spidev0: spi@0 {
> - compatible = "spidev";
> - reg = <0>;
> - spi-max-frequency = <5000000>;
> - };
> -
> - spidev1: spi@1 {
> - compatible = "spidev";
> - reg = <1>;
> - spi-max-frequency = <5000000>;
> - };
> -};
> -
> -&i2c1 {
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_i2c1>;
> - clock_frequency = <400000>;
> - status = "okay";
> -};
> -
> -&i2c2 {
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_i2c2>;
> - clock_frequency = <400000>;
> - status = "okay";
> -};
> -
> -&lcdif {
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_lcdif>;
> - status = "okay";
> -
> - port {
> - lcdif_out: endpoint {
> - remote-endpoint = <&panel_in>;
> - };
> - };
> -};
> -
> -&pwm3 {
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_pwm3>;
> - status = "okay";
> -};
> -
> -&snvs_pwrkey {
> - status = "disabled";
> -};
> -
> -&tsc {
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_tsc>;
> - xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>;
> - measure-delay-time = <0xffff>;
> - pre-charge-time = <0xffff>;
> - status = "okay";
> -};
> -
> -&uart1 {
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_uart1>;
> - status = "okay";
> -};
> -
> -&uart2 {
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_uart2>;
> - status = "okay";
> -};
> -
> -&usbotg1 {
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_usbotg1_id>;
> - vbus-supply = <®_usbotg1_vbus>;
> - dr_mode = "otg";
> - disable-over-current;
> - status = "okay";
> -};
> -
> -&usbotg2 {
> - vbus-supply = <®_usbotg2_vbus>;
> - dr_mode = "host";
> - disable-over-current;
> - status = "okay";
> };
>
> &iomuxc {
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_gpios>;
> + pinctrl-0 = <&pinctrl_gpios>, <&pinctrl_tamper_gpios>;
>
> - pinctrl_ecspi4: ecspi4grp {
> + pinctrl_tamper_gpios: tampergpiosgrp {
> fsl,pins = <
> - MX6UL_PAD_NAND_DATA04__ECSPI4_SCLK 0x1b0b0
> - MX6UL_PAD_NAND_DATA05__ECSPI4_MOSI 0x1b0b0
> - MX6UL_PAD_NAND_DATA06__ECSPI4_MISO 0x1b0b0
> - MX6UL_PAD_NAND_DATA01__GPIO4_IO03 0x1b0b0
> - MX6UL_PAD_NAND_DATA07__GPIO4_IO09 0x1b0b0
> - >;
> - };
> -
> - pinctrl_flexcan1: flexcan1grp {
> - fsl,pins = <
> - MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX 0x0b0b0
> - MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX 0x0b0b0
> - >;
> - };
> -
> - pinctrl_flexcan2: flexcan2grp {
> - fsl,pins = <
> - MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX 0x0b0b0
> - MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX 0x0b0b0
> - >;
> - };
> -
> - pinctrl_gpios: gpiosgrp {
> - fsl,pins = <
> - MX6UL_PAD_GPIO1_IO09__GPIO1_IO09 0x0b0b0
> - MX6UL_PAD_UART3_RX_DATA__GPIO1_IO25 0x0b0b0
> - MX6UL_PAD_UART3_TX_DATA__GPIO1_IO24 0x0b0b0
> - MX6UL_PAD_NAND_RE_B__GPIO4_IO00 0x0b0b0
> - MX6UL_PAD_GPIO1_IO08__GPIO1_IO08 0x0b0b0
> - MX6UL_PAD_UART1_CTS_B__GPIO1_IO18 0x0b0b0
> - MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x0b0b0
> - MX6UL_PAD_NAND_WE_B__GPIO4_IO01 0x0b0b0
> MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x0b0b0
> MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x0b0b0
> MX6UL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x0b0b0
> @@ -299,100 +27,6 @@
> >;
> };
>
> - pinctrl_gpio_keys: gpiokeysgrp {
> - fsl,pins = <
> - MX6UL_PAD_ENET2_TX_DATA0__GPIO2_IO11 0x0b0b0
> - >;
> - };
> -
> - pinctrl_i2c1: i2c1grp {
> - fsl,pins = <
> - MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0
> - MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0
> - >;
> - };
> -
> - pinctrl_i2c2: i2c2grp {
> - fsl,pins = <
> - MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x4001b8b0
> - MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x4001b8b0
> - >;
> - };
> -
> - pinctrl_lcdif: lcdifgrp {
> - fsl,pins = <
> - MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x100b1
> - MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x100b1
> - MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC 0x100b1
> - MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC 0x100b1
> - MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x100b1
> - MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x100b1
> - MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x100b1
> - MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x100b1
> - MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x100b1
> - MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x100b1
> - MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x100b1
> - MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x100b1
> - MX6UL_PAD_LCD_DATA08__LCDIF_DATA08 0x100b1
> - MX6UL_PAD_LCD_DATA09__LCDIF_DATA09 0x100b1
> - MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x100b1
> - MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x100b1
> - MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x100b1
> - MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x100b1
> - MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x100b1
> - MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x100b1
> - MX6UL_PAD_LCD_DATA16__LCDIF_DATA16 0x100b1
> - MX6UL_PAD_LCD_DATA17__LCDIF_DATA17 0x100b1
> - >;
> - };
> -
> - pinctrl_led: ledgrp {
> - fsl,pins = <
> - MX6UL_PAD_LCD_RESET__GPIO3_IO04 0x0b0b0
> - >;
> - };
> -
> - pinctrl_pwm3: pwm3grp {
> - fsl,pins = <
> - MX6UL_PAD_NAND_ALE__PWM3_OUT 0x1b0b0
> - >;
> - };
> -
> - pinctrl_tsc: tscgrp {
> - fsl,pins = <
> - MX6UL_PAD_GPIO1_IO01__GPIO1_IO01 0xb0
> - MX6UL_PAD_GPIO1_IO02__GPIO1_IO02 0xb0
> - MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0xb0
> - MX6UL_PAD_GPIO1_IO04__GPIO1_IO04 0xb0
> - >;
> - };
> -
> - pinctrl_uart1: uart1grp {
> - fsl,pins = <
> - MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1
> - MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1
> - >;
> - };
> -
> - pinctrl_uart2: uart2grp {
> - fsl,pins = <
> - MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX 0x1b0b1
> - MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX 0x1b0b1
> - >;
> - };
> -
> - pinctrl_usbotg1_id: usbotg1idgrp {
> - fsl,pins = <
> - MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID 0x1b0b0
> - >;
> - };
> -
> - pinctrl_usbotg1_vbus: usbotg1vbusgrp {
> - fsl,pins = <
> - MX6UL_PAD_GPIO1_IO05__GPIO1_IO05 0x1b0b0
> - >;
> - };
> -
> pinctrl_usbotg2_vbus: usbotg2vbusgrp {
> fsl,pins = <
> MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x1b0b0
> diff --git a/arch/arm/boot/dts/imx6ull-opos6ul.dtsi b/arch/arm/boot/dts/imx6ull-opos6ul.dtsi
> new file mode 100644
> index 000000000000..3bf1c69cc8a4
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx6ull-opos6ul.dtsi
> @@ -0,0 +1,6 @@
> +// SPDX-License-Identifier: GPL-2.0 OR X11
> +//
> +// Copyright 2019 Armadeus Systems <support@armadeus.com>
> +
> +#include "imx6ull.dtsi"
> +#include "imx6ul-imx6ull-opos6ul.dtsi"
> diff --git a/arch/arm/boot/dts/imx6ull-opos6uldev.dts b/arch/arm/boot/dts/imx6ull-opos6uldev.dts
> new file mode 100644
> index 000000000000..20642bcadf97
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx6ull-opos6uldev.dts
> @@ -0,0 +1,42 @@
> +// SPDX-License-Identifier: GPL-2.0 OR X11
> +//
> +// Copyright 2019 Armadeus Systems <support@armadeus.com>
> +
> +/dts-v1/;
> +#include "imx6ull-opos6ul.dtsi"
> +#include "imx6ul-imx6ull-opos6uldev.dtsi"
> +
> +/ {
> + model = "Armadeus Systems OPOS6UL SoM (i.MX6ULL) on OPOS6ULDev board";
> + compatible = "armadeus,opos6uldev", "armadeus,opos6ul", "fsl,imx6ull";
It seems these board compatibles are not documented, though this is not
the first time they are introduced.
Shawn
> +};
> +
> +&iomuxc_snvs {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_tamper_gpios>;
> +
> + pinctrl_tamper_gpios: tampergpiosgrp {
> + fsl,pins = <
> + MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x0b0b0
> + MX6ULL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x0b0b0
> + MX6ULL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x0b0b0
> + MX6ULL_PAD_SNVS_TAMPER4__GPIO5_IO04 0x0b0b0
> + MX6ULL_PAD_SNVS_TAMPER5__GPIO5_IO05 0x0b0b0
> + MX6ULL_PAD_SNVS_TAMPER6__GPIO5_IO06 0x0b0b0
> + MX6ULL_PAD_SNVS_TAMPER7__GPIO5_IO07 0x0b0b0
> + MX6ULL_PAD_SNVS_TAMPER8__GPIO5_IO08 0x0b0b0
> + >;
> + };
> +
> + pinctrl_usbotg2_vbus: usbotg2vbusgrp {
> + fsl,pins = <
> + MX6ULL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x1b0b0
> + >;
> + };
> +
> + pinctrl_w1: w1grp {
> + fsl,pins = <
> + MX6ULL_PAD_SNVS_TAMPER1__GPIO5_IO01 0x0b0b0
> + >;
> + };
> +};
> --
> 2.21.0
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply
* Re: [PATCH V6 09/21] clk: tegra: clk-super: Fix to enable PLLP branches to CPU
From: Sowjanya Komatineni @ 2019-07-22 7:24 UTC (permalink / raw)
To: Dmitry Osipenko, thierry.reding, jonathanh, tglx, jason,
marc.zyngier, linus.walleij, stefan, mark.rutland
Cc: pdeschrijver, pgaikwad, sboyd, linux-clk, linux-gpio, jckuo,
josephl, talho, linux-tegra, linux-kernel, mperttunen, spatra,
robh+dt, devicetree
In-Reply-To: <07897688-2a02-b7a7-7048-72c4078d26a2@gmail.com>
On 7/22/19 12:17 AM, Dmitry Osipenko wrote:
> 22.07.2019 10:12, Sowjanya Komatineni пишет:
>> On 7/21/19 11:32 PM, Dmitry Osipenko wrote:
>>> 22.07.2019 6:17, Sowjanya Komatineni пишет:
>>>> On 7/21/19 3:39 PM, Sowjanya Komatineni wrote:
>>>>> On 7/21/19 2:16 PM, Dmitry Osipenko wrote:
>>>>>> 21.07.2019 22:40, Sowjanya Komatineni пишет:
>>>>>>> This patch has a fix to enable PLLP branches to CPU before changing
>>>>>>> the CPU clusters clock source to PLLP for Gen5 Super clock.
>>>>>>>
>>>>>>> During system suspend entry and exit, CPU source will be switched
>>>>>>> to PLLP and this needs PLLP branches to be enabled to CPU prior to
>>>>>>> the switch.
>>>>>>>
>>>>>>> On system resume, warmboot code enables PLLP branches to CPU and
>>>>>>> powers up the CPU with PLLP clock source.
>>>>>>>
>>>>>>> Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
>>>>>>> ---
>>>>>>> drivers/clk/tegra/clk-super.c | 11 +++++++++++
>>>>>>> drivers/clk/tegra/clk-tegra-super-gen4.c | 4 ++--
>>>>>>> drivers/clk/tegra/clk.h | 4 ++++
>>>>>>> 3 files changed, 17 insertions(+), 2 deletions(-)
>>>>>>>
>>>>>>> diff --git a/drivers/clk/tegra/clk-super.c
>>>>>>> b/drivers/clk/tegra/clk-super.c
>>>>>>> index 39ef31b46df5..d73c587e4853 100644
>>>>>>> --- a/drivers/clk/tegra/clk-super.c
>>>>>>> +++ b/drivers/clk/tegra/clk-super.c
>>>>>>> @@ -28,6 +28,9 @@
>>>>>>> #define super_state_to_src_shift(m, s) ((m->width * s))
>>>>>>> #define super_state_to_src_mask(m) (((1 << m->width) - 1))
>>>>>>> +#define CCLK_SRC_PLLP_OUT0 4
>>>>>>> +#define CCLK_SRC_PLLP_OUT4 5
>>>>>>> +
>>>>>>> static u8 clk_super_get_parent(struct clk_hw *hw)
>>>>>>> {
>>>>>>> struct tegra_clk_super_mux *mux = to_clk_super_mux(hw);
>>>>>>> @@ -97,6 +100,14 @@ static int clk_super_set_parent(struct clk_hw
>>>>>>> *hw, u8 index)
>>>>>>> if (index == mux->div2_index)
>>>>>>> index = mux->pllx_index;
>>>>>>> }
>>>>>>> +
>>>>>>> + /*
>>>>>>> + * Enable PLLP branches to CPU before selecting PLLP source
>>>>>>> + */
>>>>>>> + if ((mux->flags & TEGRA_CPU_CLK) &&
>>>>>>> + ((index == CCLK_SRC_PLLP_OUT0) || (index ==
>>>>>>> CCLK_SRC_PLLP_OUT4)))
>>>>>>> + tegra_clk_set_pllp_out_cpu(true);
>>>>>> Should somewhere here be tegra_clk_set_pllp_out_cpu(false) when
>>>>>> switching from PLLP?
>>>>> PLLP may be used for other CPU clusters.
>>>> Though to avoid flag and check needed to make sure other CPU is not
>>>> using before disabling PLLP branch to CPU.
>>>>
>>>> But leaving it enabled shouldn't impact much as clock source mux is
>>>> after this in design anyway.
>>>>
>>>> But can add as well if its clear that way.
>>> The TRM doc says "The CPU subsystem supports a switch-cluster mode
>>> meaning that only one of the clusters can be active at any given time".
>>>
>>> Given that cluster-switching isn't supported in upstream, I don't think
>>> that you need to care about the other cluster at all, at least for now.
>>>
>>> The cluster-switching implementation in upstream is very complicated
>>> because it requires a special "hotplugging" CPU governor, which
>>> apparently no other platform needs.
>>>
>>> [snip]
>> This patch enables PLLP branches to CPU for both CPUG & CPULP if they
>> use PLLP source.
>>
>> So, to disable PLLP out CPU when not in use, we still need check for
>> other cluster because during resume both LP CPU and G CPU gets restored.
>> CPUG runs from PLLP on resume and when it does super clk restore for LP
>> CPU which may not be using PLLP, but as both uses same super mux
>> clk_ops, without check (for PLLP branch to CPU in use) disabling PLLP
>> branch to CPU during LP CPU restore looses clock to CPU G as well which
>> is running from PLLP.
>>
>> Will add check and disable PLLP if not in use in next version... this
>> need extern flag as well to mark PLLP usage with either of CPU's.
> I still don't understand why do you need to care about LP cluster at
> all, given that it's always in a power-gated state.
cclk_lp is registered thru super clk mux which uses same clk_ops as cclk_g.
during restore, cclk_lp also gets restored. So both cclk_lp & cclk_g
goes thru same clk_ops
In this patch, I marked super flags with TEGRA_CPU_CLK for both cclk_lp
& cclk_g.
So when cclk_lp restore happens, it goes thru same set_parent clk_ops
and as its source is not PLLP, it tries to disable PLLP_OUT_CPU if its
disabled without adding check for PLLP being in use by other cluster.
So either I should not mark cclk_lp as TEGRA_CPU_CLK and mark cclk_g
only as TEGRA_CPU_CLK so PLLP out to CPU can be disabled without check
if its not the source.
OR
With TEGRA_CPU_CLK used for both cclk_lp & cclk_g, need to add check if
PLLP is in use so during cclk_lp restore it doesnt disable PLLP out to CPU.
To simplify without check, will just mark cclk_g super clock flag only
as TEGRA_CPU_CLK so PLLP_OUT_CPU enable or disable happens only for CPUG
^ permalink raw reply
* Re: [Question] orphan platform data header
From: Arnd Bergmann @ 2019-07-22 7:24 UTC (permalink / raw)
To: Enrico Weigelt, metux IT consult
Cc: Masahiro Yamada, Ben Dooks, Linux Kernel Mailing List,
Linus Torvalds, Greg Kroah-Hartman, DTML, linux-arm-kernel
In-Reply-To: <21af683a-a188-7aa9-9c82-98c02b8717f8@metux.net>
On Mon, Jul 22, 2019 at 8:46 AM Enrico Weigelt, metux IT consult
<lkml@metux.net> wrote:
> On 21.07.19 16:15, Arnd Bergmann wrote:
>
> > That is different: the hardware attaches to a serial port and may well
> > be usable, and the user space side just contains a copy of the header,
> > see https://github.com/nwdigitalradio/ax25-tools/tree/master/yamdrv
>
> I believe that such header copies in userland applications are
> conceptionally wrong. Whenever something changes, both sides need
> to be kept in sync.
>
> Maybe we should talk to the hamradio folks to get this cleaned up.
> IMHO, this header should go to uapi.
Having copies of driver specific uapi headers is rather common,
and you won't have much success trying to get everyone to change
that.
The reasons why those applications do it are:
- The kernel already gives ABI guarantees so anything built with an
old header file is expected to keep working indefinitely.
- Using a new header file won't help unless the application also
knows about the added interfaces
- If an application uses more recent additions to the kernel headers,
it either has to have a matching version of that header, or use a long
series of #ifdef checks to deal with arbitrary versions.
> > It seems more useful to keep looking for drivers with a platform_data
> > header file that is no longer included by any platform for candidates
> > that may be obsolete.
>
> Some folks see platform_data old legacy that should be removed, but I
> don't aggree. For example w/ apu2 board driver (and corresponding
> amd-fch-gpio driver) I even had to introduce a pdata struct, so the
> board driver could configure the gpio driver.
The case that we are interested in is drivers that previously used
platform data in legacy board files that have since been replaced
with dtb based boots.
> Certainly, I would have
> preferred doing everything via DT, but that's not available on x86/acpi
> targets (if anybody knows a way to inject a DT snippet just for one
> driver in such a scenario, please let me know).
It's been done before, but usually with overlays that don't necessarily
make it any better than platform data. If you have a set of drivers where
one of them creates a platform device for the other driver, then platform
data is usually the easiest way, and I'm not aware of any move to
get rid of that.
As an alternative, you can use the generalized property support
from include/linux/property.h that works on top of DT, ACPI or
plain platform devices.
Arnd
^ permalink raw reply
* Re: [PATCH V6 09/21] clk: tegra: clk-super: Fix to enable PLLP branches to CPU
From: Dmitry Osipenko @ 2019-07-22 7:30 UTC (permalink / raw)
To: Sowjanya Komatineni, thierry.reding, jonathanh, tglx, jason,
marc.zyngier, linus.walleij, stefan, mark.rutland
Cc: pdeschrijver, pgaikwad, sboyd, linux-clk, linux-gpio, jckuo,
josephl, talho, linux-tegra, linux-kernel, mperttunen, spatra,
robh+dt, devicetree
In-Reply-To: <90e1a90b-1d33-a5db-9af8-dc5c5d45b65f@nvidia.com>
22.07.2019 10:24, Sowjanya Komatineni пишет:
>
> On 7/22/19 12:17 AM, Dmitry Osipenko wrote:
>> 22.07.2019 10:12, Sowjanya Komatineni пишет:
>>> On 7/21/19 11:32 PM, Dmitry Osipenko wrote:
>>>> 22.07.2019 6:17, Sowjanya Komatineni пишет:
>>>>> On 7/21/19 3:39 PM, Sowjanya Komatineni wrote:
>>>>>> On 7/21/19 2:16 PM, Dmitry Osipenko wrote:
>>>>>>> 21.07.2019 22:40, Sowjanya Komatineni пишет:
>>>>>>>> This patch has a fix to enable PLLP branches to CPU before changing
>>>>>>>> the CPU clusters clock source to PLLP for Gen5 Super clock.
>>>>>>>>
>>>>>>>> During system suspend entry and exit, CPU source will be switched
>>>>>>>> to PLLP and this needs PLLP branches to be enabled to CPU prior to
>>>>>>>> the switch.
>>>>>>>>
>>>>>>>> On system resume, warmboot code enables PLLP branches to CPU and
>>>>>>>> powers up the CPU with PLLP clock source.
>>>>>>>>
>>>>>>>> Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
>>>>>>>> ---
>>>>>>>> drivers/clk/tegra/clk-super.c | 11 +++++++++++
>>>>>>>> drivers/clk/tegra/clk-tegra-super-gen4.c | 4 ++--
>>>>>>>> drivers/clk/tegra/clk.h | 4 ++++
>>>>>>>> 3 files changed, 17 insertions(+), 2 deletions(-)
>>>>>>>>
>>>>>>>> diff --git a/drivers/clk/tegra/clk-super.c
>>>>>>>> b/drivers/clk/tegra/clk-super.c
>>>>>>>> index 39ef31b46df5..d73c587e4853 100644
>>>>>>>> --- a/drivers/clk/tegra/clk-super.c
>>>>>>>> +++ b/drivers/clk/tegra/clk-super.c
>>>>>>>> @@ -28,6 +28,9 @@
>>>>>>>> #define super_state_to_src_shift(m, s) ((m->width * s))
>>>>>>>> #define super_state_to_src_mask(m) (((1 << m->width) - 1))
>>>>>>>> +#define CCLK_SRC_PLLP_OUT0 4
>>>>>>>> +#define CCLK_SRC_PLLP_OUT4 5
>>>>>>>> +
>>>>>>>> static u8 clk_super_get_parent(struct clk_hw *hw)
>>>>>>>> {
>>>>>>>> struct tegra_clk_super_mux *mux = to_clk_super_mux(hw);
>>>>>>>> @@ -97,6 +100,14 @@ static int clk_super_set_parent(struct clk_hw
>>>>>>>> *hw, u8 index)
>>>>>>>> if (index == mux->div2_index)
>>>>>>>> index = mux->pllx_index;
>>>>>>>> }
>>>>>>>> +
>>>>>>>> + /*
>>>>>>>> + * Enable PLLP branches to CPU before selecting PLLP source
>>>>>>>> + */
>>>>>>>> + if ((mux->flags & TEGRA_CPU_CLK) &&
>>>>>>>> + ((index == CCLK_SRC_PLLP_OUT0) || (index ==
>>>>>>>> CCLK_SRC_PLLP_OUT4)))
>>>>>>>> + tegra_clk_set_pllp_out_cpu(true);
>>>>>>> Should somewhere here be tegra_clk_set_pllp_out_cpu(false) when
>>>>>>> switching from PLLP?
>>>>>> PLLP may be used for other CPU clusters.
>>>>> Though to avoid flag and check needed to make sure other CPU is not
>>>>> using before disabling PLLP branch to CPU.
>>>>>
>>>>> But leaving it enabled shouldn't impact much as clock source mux is
>>>>> after this in design anyway.
>>>>>
>>>>> But can add as well if its clear that way.
>>>> The TRM doc says "The CPU subsystem supports a switch-cluster mode
>>>> meaning that only one of the clusters can be active at any given time".
>>>>
>>>> Given that cluster-switching isn't supported in upstream, I don't think
>>>> that you need to care about the other cluster at all, at least for now.
>>>>
>>>> The cluster-switching implementation in upstream is very complicated
>>>> because it requires a special "hotplugging" CPU governor, which
>>>> apparently no other platform needs.
>>>>
>>>> [snip]
>>> This patch enables PLLP branches to CPU for both CPUG & CPULP if they
>>> use PLLP source.
>>>
>>> So, to disable PLLP out CPU when not in use, we still need check for
>>> other cluster because during resume both LP CPU and G CPU gets restored.
>>> CPUG runs from PLLP on resume and when it does super clk restore for LP
>>> CPU which may not be using PLLP, but as both uses same super mux
>>> clk_ops, without check (for PLLP branch to CPU in use) disabling PLLP
>>> branch to CPU during LP CPU restore looses clock to CPU G as well which
>>> is running from PLLP.
>>>
>>> Will add check and disable PLLP if not in use in next version... this
>>> need extern flag as well to mark PLLP usage with either of CPU's.
>> I still don't understand why do you need to care about LP cluster at
>> all, given that it's always in a power-gated state.
>
> cclk_lp is registered thru super clk mux which uses same clk_ops as cclk_g.
>
> during restore, cclk_lp also gets restored. So both cclk_lp & cclk_g
> goes thru same clk_ops
>
> In this patch, I marked super flags with TEGRA_CPU_CLK for both cclk_lp
> & cclk_g.
>
> So when cclk_lp restore happens, it goes thru same set_parent clk_ops
> and as its source is not PLLP, it tries to disable PLLP_OUT_CPU if its
> disabled without adding check for PLLP being in use by other cluster.
Ah, okay.
> So either I should not mark cclk_lp as TEGRA_CPU_CLK and mark cclk_g
> only as TEGRA_CPU_CLK so PLLP out to CPU can be disabled without check
> if its not the source.
>
> OR
>
> With TEGRA_CPU_CLK used for both cclk_lp & cclk_g, need to add check if
> PLLP is in use so during cclk_lp restore it doesnt disable PLLP out to CPU.
>
>
> To simplify without check, will just mark cclk_g super clock flag only
> as TEGRA_CPU_CLK so PLLP_OUT_CPU enable or disable happens only for CPUG
Sounds good. Then please add a brief comment to the CPULP, telling why
it misses the flag, for the record.
^ permalink raw reply
* Re: [PATCH V6 09/21] clk: tegra: clk-super: Fix to enable PLLP branches to CPU
From: Sowjanya Komatineni @ 2019-07-22 7:36 UTC (permalink / raw)
To: Dmitry Osipenko, thierry.reding, jonathanh, tglx, jason,
marc.zyngier, linus.walleij, stefan, mark.rutland
Cc: pdeschrijver, pgaikwad, sboyd, linux-clk, linux-gpio, jckuo,
josephl, talho, linux-tegra, linux-kernel, mperttunen, spatra,
robh+dt, devicetree
In-Reply-To: <fc6403e6-0022-f505-8864-70bc047207c9@gmail.com>
On 7/22/19 12:30 AM, Dmitry Osipenko wrote:
> 22.07.2019 10:24, Sowjanya Komatineni пишет:
>> On 7/22/19 12:17 AM, Dmitry Osipenko wrote:
>>> 22.07.2019 10:12, Sowjanya Komatineni пишет:
>>>> On 7/21/19 11:32 PM, Dmitry Osipenko wrote:
>>>>> 22.07.2019 6:17, Sowjanya Komatineni пишет:
>>>>>> On 7/21/19 3:39 PM, Sowjanya Komatineni wrote:
>>>>>>> On 7/21/19 2:16 PM, Dmitry Osipenko wrote:
>>>>>>>> 21.07.2019 22:40, Sowjanya Komatineni пишет:
>>>>>>>>> This patch has a fix to enable PLLP branches to CPU before changing
>>>>>>>>> the CPU clusters clock source to PLLP for Gen5 Super clock.
>>>>>>>>>
>>>>>>>>> During system suspend entry and exit, CPU source will be switched
>>>>>>>>> to PLLP and this needs PLLP branches to be enabled to CPU prior to
>>>>>>>>> the switch.
>>>>>>>>>
>>>>>>>>> On system resume, warmboot code enables PLLP branches to CPU and
>>>>>>>>> powers up the CPU with PLLP clock source.
>>>>>>>>>
>>>>>>>>> Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
>>>>>>>>> ---
>>>>>>>>> drivers/clk/tegra/clk-super.c | 11 +++++++++++
>>>>>>>>> drivers/clk/tegra/clk-tegra-super-gen4.c | 4 ++--
>>>>>>>>> drivers/clk/tegra/clk.h | 4 ++++
>>>>>>>>> 3 files changed, 17 insertions(+), 2 deletions(-)
>>>>>>>>>
>>>>>>>>> diff --git a/drivers/clk/tegra/clk-super.c
>>>>>>>>> b/drivers/clk/tegra/clk-super.c
>>>>>>>>> index 39ef31b46df5..d73c587e4853 100644
>>>>>>>>> --- a/drivers/clk/tegra/clk-super.c
>>>>>>>>> +++ b/drivers/clk/tegra/clk-super.c
>>>>>>>>> @@ -28,6 +28,9 @@
>>>>>>>>> #define super_state_to_src_shift(m, s) ((m->width * s))
>>>>>>>>> #define super_state_to_src_mask(m) (((1 << m->width) - 1))
>>>>>>>>> +#define CCLK_SRC_PLLP_OUT0 4
>>>>>>>>> +#define CCLK_SRC_PLLP_OUT4 5
>>>>>>>>> +
>>>>>>>>> static u8 clk_super_get_parent(struct clk_hw *hw)
>>>>>>>>> {
>>>>>>>>> struct tegra_clk_super_mux *mux = to_clk_super_mux(hw);
>>>>>>>>> @@ -97,6 +100,14 @@ static int clk_super_set_parent(struct clk_hw
>>>>>>>>> *hw, u8 index)
>>>>>>>>> if (index == mux->div2_index)
>>>>>>>>> index = mux->pllx_index;
>>>>>>>>> }
>>>>>>>>> +
>>>>>>>>> + /*
>>>>>>>>> + * Enable PLLP branches to CPU before selecting PLLP source
>>>>>>>>> + */
>>>>>>>>> + if ((mux->flags & TEGRA_CPU_CLK) &&
>>>>>>>>> + ((index == CCLK_SRC_PLLP_OUT0) || (index ==
>>>>>>>>> CCLK_SRC_PLLP_OUT4)))
>>>>>>>>> + tegra_clk_set_pllp_out_cpu(true);
>>>>>>>> Should somewhere here be tegra_clk_set_pllp_out_cpu(false) when
>>>>>>>> switching from PLLP?
>>>>>>> PLLP may be used for other CPU clusters.
>>>>>> Though to avoid flag and check needed to make sure other CPU is not
>>>>>> using before disabling PLLP branch to CPU.
>>>>>>
>>>>>> But leaving it enabled shouldn't impact much as clock source mux is
>>>>>> after this in design anyway.
>>>>>>
>>>>>> But can add as well if its clear that way.
>>>>> The TRM doc says "The CPU subsystem supports a switch-cluster mode
>>>>> meaning that only one of the clusters can be active at any given time".
>>>>>
>>>>> Given that cluster-switching isn't supported in upstream, I don't think
>>>>> that you need to care about the other cluster at all, at least for now.
>>>>>
>>>>> The cluster-switching implementation in upstream is very complicated
>>>>> because it requires a special "hotplugging" CPU governor, which
>>>>> apparently no other platform needs.
>>>>>
>>>>> [snip]
>>>> This patch enables PLLP branches to CPU for both CPUG & CPULP if they
>>>> use PLLP source.
>>>>
>>>> So, to disable PLLP out CPU when not in use, we still need check for
>>>> other cluster because during resume both LP CPU and G CPU gets restored.
>>>> CPUG runs from PLLP on resume and when it does super clk restore for LP
>>>> CPU which may not be using PLLP, but as both uses same super mux
>>>> clk_ops, without check (for PLLP branch to CPU in use) disabling PLLP
>>>> branch to CPU during LP CPU restore looses clock to CPU G as well which
>>>> is running from PLLP.
>>>>
>>>> Will add check and disable PLLP if not in use in next version... this
>>>> need extern flag as well to mark PLLP usage with either of CPU's.
>>> I still don't understand why do you need to care about LP cluster at
>>> all, given that it's always in a power-gated state.
>> cclk_lp is registered thru super clk mux which uses same clk_ops as cclk_g.
>>
>> during restore, cclk_lp also gets restored. So both cclk_lp & cclk_g
>> goes thru same clk_ops
>>
>> In this patch, I marked super flags with TEGRA_CPU_CLK for both cclk_lp
>> & cclk_g.
>>
>> So when cclk_lp restore happens, it goes thru same set_parent clk_ops
>> and as its source is not PLLP, it tries to disable PLLP_OUT_CPU if its
>> disabled without adding check for PLLP being in use by other cluster.
> Ah, okay.
>
>> So either I should not mark cclk_lp as TEGRA_CPU_CLK and mark cclk_g
>> only as TEGRA_CPU_CLK so PLLP out to CPU can be disabled without check
>> if its not the source.
>>
>> OR
>>
>> With TEGRA_CPU_CLK used for both cclk_lp & cclk_g, need to add check if
>> PLLP is in use so during cclk_lp restore it doesnt disable PLLP out to CPU.
>>
>>
>> To simplify without check, will just mark cclk_g super clock flag only
>> as TEGRA_CPU_CLK so PLLP_OUT_CPU enable or disable happens only for CPUG
> Sounds good. Then please add a brief comment to the CPULP, telling why
> it misses the flag, for the record.
Sure, will add comment.
^ permalink raw reply
* [PATCH v4 0/5] clk: qcom: Add support for SM8150 GCC
From: Vinod Koul @ 2019-07-22 7:43 UTC (permalink / raw)
To: Stephen Boyd
Cc: linux-arm-msm, Bjorn Andersson, Vinod Koul, Deepak Katragadda,
Andy Gross, David Brown, Michael Turquette, linux-clk, Taniya Das,
linux-kernel, Rob Herring, devicetree
This series adds suport for SM8150 GCC which requires Trion PLLs and adds
that as well.
Also fixed some minor nits seen in clk-alpha-pll code
Changes in v4:
- Bring back DIV_ROUND_UP_ULL patch as fix in merged upstream
- Split binding to separate patch and add the gcc parent clock to it
(Didn't add Rob's ack as new clocks are added to patch, so need
review)
- Fix the parent pointers for clock driver and add comments for
critical clocks and halt delay
- Fix the trion pll enable and typo in patch
- tested on v5.3-rc1
Changes in v3:
- Drop the cast for DIV_ROUND_UP_ULL as that need s afix in macro,
so patch it up once core change in merged
- Drop module alias patch and drop it from sm8150 driver
- Add review tag by Bjorn
Deepak Katragadda (3):
clk: qcom: clk-alpha-pll: Add support for Trion PLLs
dt-bindings: clock: Document gcc bindings for SM8150
clk: qcom: gcc: Add global clock controller driver for SM8150
Vinod Koul (2):
clk: qcom: clk-alpha-pll: Remove unnecessary cast
clk: qcom: clk-alpha-pll: Remove post_div_table checks
.../devicetree/bindings/clock/qcom,gcc.txt | 21 +
drivers/clk/qcom/Kconfig | 7 +
drivers/clk/qcom/Makefile | 1 +
drivers/clk/qcom/clk-alpha-pll.c | 236 +-
drivers/clk/qcom/clk-alpha-pll.h | 7 +
drivers/clk/qcom/gcc-sm8150.c | 3588 +++++++++++++++++
include/dt-bindings/clock/qcom,gcc-sm8150.h | 243 ++
7 files changed, 4086 insertions(+), 17 deletions(-)
create mode 100644 drivers/clk/qcom/gcc-sm8150.c
create mode 100644 include/dt-bindings/clock/qcom,gcc-sm8150.h
base-commit: 5f9e832c137075045d15cd6899ab0505cfb2ca4b
--
2.20.1
^ permalink raw reply
* [PATCH v4 4/5] dt-bindings: clock: Document gcc bindings for SM8150
From: Vinod Koul @ 2019-07-22 7:43 UTC (permalink / raw)
To: Stephen Boyd
Cc: linux-arm-msm, Bjorn Andersson, Deepak Katragadda, Andy Gross,
Michael Turquette, Rob Herring, Mark Rutland, linux-clk,
devicetree, linux-kernel, Taniya Das, Vinod Koul
In-Reply-To: <20190722074348.29582-1-vkoul@kernel.org>
From: Deepak Katragadda <dkatraga@codeaurora.org>
Document the global clock controller found on SM8150.
Signed-off-by: Deepak Katragadda <dkatraga@codeaurora.org>
Signed-off-by: Taniya Das <tdas@codeaurora.org>
[vkoul: port to upstream and add external clocks
split binding to this patch]]
Signed-off-by: Vinod Koul <vkoul@kernel.org>
---
.../devicetree/bindings/clock/qcom,gcc.txt | 21 ++
include/dt-bindings/clock/qcom,gcc-sm8150.h | 243 ++++++++++++++++++
2 files changed, 264 insertions(+)
create mode 100644 include/dt-bindings/clock/qcom,gcc-sm8150.h
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc.txt b/Documentation/devicetree/bindings/clock/qcom,gcc.txt
index 8661c3cd3ccf..d14362ad4132 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc.txt
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc.txt
@@ -23,6 +23,7 @@ Required properties :
"qcom,gcc-sdm630"
"qcom,gcc-sdm660"
"qcom,gcc-sdm845"
+ "qcom,gcc-sm8150"
- reg : shall contain base register location and length
- #clock-cells : shall contain 1
@@ -38,6 +39,13 @@ Documentation/devicetree/bindings/thermal/qcom-tsens.txt
- protected-clocks : Protected clock specifier list as per common clock
binding.
+For SM8150 only:
+ - clocks: a list of phandles and clock-specifier pairs,
+ one for each entry in clock-names.
+ - clock-names: "bi_tcxo" (required)
+ "sleep_clk" (optional)
+ "aud_ref_clock" (optional)
+
Example:
clock-controller@900000 {
compatible = "qcom,gcc-msm8960";
@@ -71,3 +79,16 @@ Example of GCC with protected-clocks properties:
<GCC_LPASS_Q6_AXI_CLK>,
<GCC_LPASS_SWAY_CLK>;
};
+
+Example of GCC with clocks
+ gcc: clock-controller@100000 {
+ compatible = "qcom,gcc-sm8150";
+ reg = <0x00100000 0x1f0000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ clock-names = "bi_tcxo",
+ "sleep_clk";
+ clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+ <&sleep_clk>;
+ };
diff --git a/include/dt-bindings/clock/qcom,gcc-sm8150.h b/include/dt-bindings/clock/qcom,gcc-sm8150.h
new file mode 100644
index 000000000000..90d60ef94c64
--- /dev/null
+++ b/include/dt-bindings/clock/qcom,gcc-sm8150.h
@@ -0,0 +1,243 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2019, The Linux Foundation. All rights reserved.
+ */
+
+#ifndef _DT_BINDINGS_CLK_QCOM_GCC_SM8150_H
+#define _DT_BINDINGS_CLK_QCOM_GCC_SM8150_H
+
+/* GCC clocks */
+#define GCC_AGGRE_NOC_PCIE_TBU_CLK 0
+#define GCC_AGGRE_UFS_CARD_AXI_CLK 1
+#define GCC_AGGRE_UFS_CARD_AXI_HW_CTL_CLK 2
+#define GCC_AGGRE_UFS_PHY_AXI_CLK 3
+#define GCC_AGGRE_UFS_PHY_AXI_HW_CTL_CLK 4
+#define GCC_AGGRE_USB3_PRIM_AXI_CLK 5
+#define GCC_AGGRE_USB3_SEC_AXI_CLK 6
+#define GCC_BOOT_ROM_AHB_CLK 7
+#define GCC_CAMERA_AHB_CLK 8
+#define GCC_CAMERA_HF_AXI_CLK 9
+#define GCC_CAMERA_SF_AXI_CLK 10
+#define GCC_CAMERA_XO_CLK 11
+#define GCC_CFG_NOC_USB3_PRIM_AXI_CLK 12
+#define GCC_CFG_NOC_USB3_SEC_AXI_CLK 13
+#define GCC_CPUSS_AHB_CLK 14
+#define GCC_CPUSS_AHB_CLK_SRC 15
+#define GCC_CPUSS_DVM_BUS_CLK 16
+#define GCC_CPUSS_GNOC_CLK 17
+#define GCC_CPUSS_RBCPR_CLK 18
+#define GCC_DDRSS_GPU_AXI_CLK 19
+#define GCC_DISP_AHB_CLK 20
+#define GCC_DISP_HF_AXI_CLK 21
+#define GCC_DISP_SF_AXI_CLK 22
+#define GCC_DISP_XO_CLK 23
+#define GCC_EMAC_AXI_CLK 24
+#define GCC_EMAC_PTP_CLK 25
+#define GCC_EMAC_PTP_CLK_SRC 26
+#define GCC_EMAC_RGMII_CLK 27
+#define GCC_EMAC_RGMII_CLK_SRC 28
+#define GCC_EMAC_SLV_AHB_CLK 29
+#define GCC_GP1_CLK 30
+#define GCC_GP1_CLK_SRC 31
+#define GCC_GP2_CLK 32
+#define GCC_GP2_CLK_SRC 33
+#define GCC_GP3_CLK 34
+#define GCC_GP3_CLK_SRC 35
+#define GCC_GPU_CFG_AHB_CLK 36
+#define GCC_GPU_GPLL0_CLK_SRC 37
+#define GCC_GPU_GPLL0_DIV_CLK_SRC 38
+#define GCC_GPU_IREF_CLK 39
+#define GCC_GPU_MEMNOC_GFX_CLK 40
+#define GCC_GPU_SNOC_DVM_GFX_CLK 41
+#define GCC_NPU_AT_CLK 42
+#define GCC_NPU_AXI_CLK 43
+#define GCC_NPU_CFG_AHB_CLK 44
+#define GCC_NPU_GPLL0_CLK_SRC 45
+#define GCC_NPU_GPLL0_DIV_CLK_SRC 46
+#define GCC_NPU_TRIG_CLK 47
+#define GCC_PCIE0_PHY_REFGEN_CLK 48
+#define GCC_PCIE1_PHY_REFGEN_CLK 49
+#define GCC_PCIE_0_AUX_CLK 50
+#define GCC_PCIE_0_AUX_CLK_SRC 51
+#define GCC_PCIE_0_CFG_AHB_CLK 52
+#define GCC_PCIE_0_CLKREF_CLK 53
+#define GCC_PCIE_0_MSTR_AXI_CLK 54
+#define GCC_PCIE_0_PIPE_CLK 55
+#define GCC_PCIE_0_SLV_AXI_CLK 56
+#define GCC_PCIE_0_SLV_Q2A_AXI_CLK 57
+#define GCC_PCIE_1_AUX_CLK 58
+#define GCC_PCIE_1_AUX_CLK_SRC 59
+#define GCC_PCIE_1_CFG_AHB_CLK 60
+#define GCC_PCIE_1_CLKREF_CLK 61
+#define GCC_PCIE_1_MSTR_AXI_CLK 62
+#define GCC_PCIE_1_PIPE_CLK 63
+#define GCC_PCIE_1_SLV_AXI_CLK 64
+#define GCC_PCIE_1_SLV_Q2A_AXI_CLK 65
+#define GCC_PCIE_PHY_AUX_CLK 66
+#define GCC_PCIE_PHY_REFGEN_CLK_SRC 67
+#define GCC_PDM2_CLK 68
+#define GCC_PDM2_CLK_SRC 69
+#define GCC_PDM_AHB_CLK 70
+#define GCC_PDM_XO4_CLK 71
+#define GCC_PRNG_AHB_CLK 72
+#define GCC_QMIP_CAMERA_NRT_AHB_CLK 73
+#define GCC_QMIP_CAMERA_RT_AHB_CLK 74
+#define GCC_QMIP_DISP_AHB_CLK 75
+#define GCC_QMIP_VIDEO_CVP_AHB_CLK 76
+#define GCC_QMIP_VIDEO_VCODEC_AHB_CLK 77
+#define GCC_QSPI_CNOC_PERIPH_AHB_CLK 78
+#define GCC_QSPI_CORE_CLK 79
+#define GCC_QSPI_CORE_CLK_SRC 80
+#define GCC_QUPV3_WRAP0_S0_CLK 81
+#define GCC_QUPV3_WRAP0_S0_CLK_SRC 82
+#define GCC_QUPV3_WRAP0_S1_CLK 83
+#define GCC_QUPV3_WRAP0_S1_CLK_SRC 84
+#define GCC_QUPV3_WRAP0_S2_CLK 85
+#define GCC_QUPV3_WRAP0_S2_CLK_SRC 86
+#define GCC_QUPV3_WRAP0_S3_CLK 87
+#define GCC_QUPV3_WRAP0_S3_CLK_SRC 88
+#define GCC_QUPV3_WRAP0_S4_CLK 89
+#define GCC_QUPV3_WRAP0_S4_CLK_SRC 90
+#define GCC_QUPV3_WRAP0_S5_CLK 91
+#define GCC_QUPV3_WRAP0_S5_CLK_SRC 92
+#define GCC_QUPV3_WRAP0_S6_CLK 93
+#define GCC_QUPV3_WRAP0_S6_CLK_SRC 94
+#define GCC_QUPV3_WRAP0_S7_CLK 95
+#define GCC_QUPV3_WRAP0_S7_CLK_SRC 96
+#define GCC_QUPV3_WRAP1_S0_CLK 97
+#define GCC_QUPV3_WRAP1_S0_CLK_SRC 98
+#define GCC_QUPV3_WRAP1_S1_CLK 99
+#define GCC_QUPV3_WRAP1_S1_CLK_SRC 100
+#define GCC_QUPV3_WRAP1_S2_CLK 101
+#define GCC_QUPV3_WRAP1_S2_CLK_SRC 102
+#define GCC_QUPV3_WRAP1_S3_CLK 103
+#define GCC_QUPV3_WRAP1_S3_CLK_SRC 104
+#define GCC_QUPV3_WRAP1_S4_CLK 105
+#define GCC_QUPV3_WRAP1_S4_CLK_SRC 106
+#define GCC_QUPV3_WRAP1_S5_CLK 107
+#define GCC_QUPV3_WRAP1_S5_CLK_SRC 108
+#define GCC_QUPV3_WRAP2_S0_CLK 109
+#define GCC_QUPV3_WRAP2_S0_CLK_SRC 110
+#define GCC_QUPV3_WRAP2_S1_CLK 111
+#define GCC_QUPV3_WRAP2_S1_CLK_SRC 112
+#define GCC_QUPV3_WRAP2_S2_CLK 113
+#define GCC_QUPV3_WRAP2_S2_CLK_SRC 114
+#define GCC_QUPV3_WRAP2_S3_CLK 115
+#define GCC_QUPV3_WRAP2_S3_CLK_SRC 116
+#define GCC_QUPV3_WRAP2_S4_CLK 117
+#define GCC_QUPV3_WRAP2_S4_CLK_SRC 118
+#define GCC_QUPV3_WRAP2_S5_CLK 119
+#define GCC_QUPV3_WRAP2_S5_CLK_SRC 120
+#define GCC_QUPV3_WRAP_0_M_AHB_CLK 121
+#define GCC_QUPV3_WRAP_0_S_AHB_CLK 122
+#define GCC_QUPV3_WRAP_1_M_AHB_CLK 123
+#define GCC_QUPV3_WRAP_1_S_AHB_CLK 124
+#define GCC_QUPV3_WRAP_2_M_AHB_CLK 125
+#define GCC_QUPV3_WRAP_2_S_AHB_CLK 126
+#define GCC_SDCC2_AHB_CLK 127
+#define GCC_SDCC2_APPS_CLK 128
+#define GCC_SDCC2_APPS_CLK_SRC 129
+#define GCC_SDCC4_AHB_CLK 130
+#define GCC_SDCC4_APPS_CLK 131
+#define GCC_SDCC4_APPS_CLK_SRC 132
+#define GCC_SYS_NOC_CPUSS_AHB_CLK 133
+#define GCC_TSIF_AHB_CLK 134
+#define GCC_TSIF_INACTIVITY_TIMERS_CLK 135
+#define GCC_TSIF_REF_CLK 136
+#define GCC_TSIF_REF_CLK_SRC 137
+#define GCC_UFS_CARD_AHB_CLK 138
+#define GCC_UFS_CARD_AXI_CLK 139
+#define GCC_UFS_CARD_AXI_CLK_SRC 140
+#define GCC_UFS_CARD_AXI_HW_CTL_CLK 141
+#define GCC_UFS_CARD_CLKREF_CLK 142
+#define GCC_UFS_CARD_ICE_CORE_CLK 143
+#define GCC_UFS_CARD_ICE_CORE_CLK_SRC 144
+#define GCC_UFS_CARD_ICE_CORE_HW_CTL_CLK 145
+#define GCC_UFS_CARD_PHY_AUX_CLK 146
+#define GCC_UFS_CARD_PHY_AUX_CLK_SRC 147
+#define GCC_UFS_CARD_PHY_AUX_HW_CTL_CLK 148
+#define GCC_UFS_CARD_RX_SYMBOL_0_CLK 149
+#define GCC_UFS_CARD_RX_SYMBOL_1_CLK 150
+#define GCC_UFS_CARD_TX_SYMBOL_0_CLK 151
+#define GCC_UFS_CARD_UNIPRO_CORE_CLK 152
+#define GCC_UFS_CARD_UNIPRO_CORE_CLK_SRC 153
+#define GCC_UFS_CARD_UNIPRO_CORE_HW_CTL_CLK 154
+#define GCC_UFS_MEM_CLKREF_CLK 155
+#define GCC_UFS_PHY_AHB_CLK 156
+#define GCC_UFS_PHY_AXI_CLK 157
+#define GCC_UFS_PHY_AXI_CLK_SRC 158
+#define GCC_UFS_PHY_AXI_HW_CTL_CLK 159
+#define GCC_UFS_PHY_ICE_CORE_CLK 160
+#define GCC_UFS_PHY_ICE_CORE_CLK_SRC 161
+#define GCC_UFS_PHY_ICE_CORE_HW_CTL_CLK 162
+#define GCC_UFS_PHY_PHY_AUX_CLK 163
+#define GCC_UFS_PHY_PHY_AUX_CLK_SRC 164
+#define GCC_UFS_PHY_PHY_AUX_HW_CTL_CLK 165
+#define GCC_UFS_PHY_RX_SYMBOL_0_CLK 166
+#define GCC_UFS_PHY_RX_SYMBOL_1_CLK 167
+#define GCC_UFS_PHY_TX_SYMBOL_0_CLK 168
+#define GCC_UFS_PHY_UNIPRO_CORE_CLK 169
+#define GCC_UFS_PHY_UNIPRO_CORE_CLK_SRC 170
+#define GCC_UFS_PHY_UNIPRO_CORE_HW_CTL_CLK 171
+#define GCC_USB30_PRIM_MASTER_CLK 172
+#define GCC_USB30_PRIM_MASTER_CLK_SRC 173
+#define GCC_USB30_PRIM_MOCK_UTMI_CLK 174
+#define GCC_USB30_PRIM_MOCK_UTMI_CLK_SRC 175
+#define GCC_USB30_PRIM_SLEEP_CLK 176
+#define GCC_USB30_SEC_MASTER_CLK 177
+#define GCC_USB30_SEC_MASTER_CLK_SRC 178
+#define GCC_USB30_SEC_MOCK_UTMI_CLK 179
+#define GCC_USB30_SEC_MOCK_UTMI_CLK_SRC 180
+#define GCC_USB30_SEC_SLEEP_CLK 181
+#define GCC_USB3_PRIM_CLKREF_CLK 182
+#define GCC_USB3_PRIM_PHY_AUX_CLK 183
+#define GCC_USB3_PRIM_PHY_AUX_CLK_SRC 184
+#define GCC_USB3_PRIM_PHY_COM_AUX_CLK 185
+#define GCC_USB3_PRIM_PHY_PIPE_CLK 186
+#define GCC_USB3_SEC_CLKREF_CLK 187
+#define GCC_USB3_SEC_PHY_AUX_CLK 188
+#define GCC_USB3_SEC_PHY_AUX_CLK_SRC 189
+#define GCC_USB3_SEC_PHY_COM_AUX_CLK 190
+#define GCC_USB3_SEC_PHY_PIPE_CLK 191
+#define GCC_VIDEO_AHB_CLK 192
+#define GCC_VIDEO_AXI0_CLK 193
+#define GCC_VIDEO_AXI1_CLK 194
+#define GCC_VIDEO_AXIC_CLK 195
+#define GCC_VIDEO_XO_CLK 196
+#define GPLL0 197
+#define GPLL0_OUT_EVEN 198
+#define GPLL7 199
+#define GPLL9 200
+
+/* Reset clocks */
+#define GCC_EMAC_BCR 0
+#define GCC_GPU_BCR 1
+#define GCC_MMSS_BCR 2
+#define GCC_NPU_BCR 3
+#define GCC_PCIE_0_BCR 4
+#define GCC_PCIE_0_PHY_BCR 5
+#define GCC_PCIE_1_BCR 6
+#define GCC_PCIE_1_PHY_BCR 7
+#define GCC_PCIE_PHY_BCR 8
+#define GCC_PDM_BCR 9
+#define GCC_PRNG_BCR 10
+#define GCC_QSPI_BCR 11
+#define GCC_QUPV3_WRAPPER_0_BCR 12
+#define GCC_QUPV3_WRAPPER_1_BCR 13
+#define GCC_QUPV3_WRAPPER_2_BCR 14
+#define GCC_QUSB2PHY_PRIM_BCR 15
+#define GCC_QUSB2PHY_SEC_BCR 16
+#define GCC_USB3_PHY_PRIM_BCR 17
+#define GCC_USB3_DP_PHY_PRIM_BCR 18
+#define GCC_USB3_PHY_SEC_BCR 19
+#define GCC_USB3PHY_PHY_SEC_BCR 20
+#define GCC_SDCC2_BCR 21
+#define GCC_SDCC4_BCR 22
+#define GCC_TSIF_BCR 23
+#define GCC_UFS_CARD_BCR 24
+#define GCC_UFS_PHY_BCR 25
+#define GCC_USB30_PRIM_BCR 26
+#define GCC_USB30_SEC_BCR 27
+#define GCC_USB_PHY_CFG_AHB2PHY_BCR 28
+
+#endif
--
2.20.1
^ permalink raw reply related
* [PATCH v4 5/5] clk: qcom: gcc: Add global clock controller driver for SM8150
From: Vinod Koul @ 2019-07-22 7:43 UTC (permalink / raw)
To: Stephen Boyd
Cc: linux-arm-msm, Bjorn Andersson, Deepak Katragadda, Andy Gross,
Michael Turquette, Rob Herring, Mark Rutland, linux-clk,
devicetree, linux-kernel, Taniya Das, Vinod Koul
In-Reply-To: <20190722074348.29582-1-vkoul@kernel.org>
From: Deepak Katragadda <dkatraga@codeaurora.org>
Add the clocks supported in global clock controller which clock the
peripherals like BLSPs, SDCC, USB, MDSS etc. Register all the clocks
to the clock framework for the clients to be able to request for them.
Signed-off-by: Deepak Katragadda <dkatraga@codeaurora.org>
Signed-off-by: Taniya Das <tdas@codeaurora.org>
[vkoul: port to upstream and tidy-up
port to new parent scheme
Add comments for critical clocks]]
Signed-off-by: Vinod Koul <vkoul@kernel.org>
---
drivers/clk/qcom/Kconfig | 7 +
drivers/clk/qcom/Makefile | 1 +
drivers/clk/qcom/gcc-sm8150.c | 3588 +++++++++++++++++++++++++++++++++
3 files changed, 3596 insertions(+)
create mode 100644 drivers/clk/qcom/gcc-sm8150.c
diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
index e1ff83cc361e..73cf0e916ea0 100644
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
@@ -292,6 +292,13 @@ config SDM_LPASSCC_845
Say Y if you want to use the LPASS branch clocks of the LPASS clock
controller to reset the LPASS subsystem.
+config SM_GCC_8150
+ tristate "SM8150 Global Clock Controller"
+ help
+ Support for the global clock controller on SM8150 devices.
+ Say Y if you want to use peripheral devices such as UART,
+ SPI, I2C, USB, SD/UFS, PCIe etc.
+
config SPMI_PMIC_CLKDIV
tristate "SPMI PMIC clkdiv Support"
depends on SPMI || COMPILE_TEST
diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
index f0768fb1f037..4a813b4055d0 100644
--- a/drivers/clk/qcom/Makefile
+++ b/drivers/clk/qcom/Makefile
@@ -50,6 +50,7 @@ obj-$(CONFIG_SDM_GCC_845) += gcc-sdm845.o
obj-$(CONFIG_SDM_GPUCC_845) += gpucc-sdm845.o
obj-$(CONFIG_SDM_LPASSCC_845) += lpasscc-sdm845.o
obj-$(CONFIG_SDM_VIDEOCC_845) += videocc-sdm845.o
+obj-$(CONFIG_SM_GCC_8150) += gcc-sm8150.o
obj-$(CONFIG_SPMI_PMIC_CLKDIV) += clk-spmi-pmic-div.o
obj-$(CONFIG_KPSS_XCC) += kpss-xcc.o
obj-$(CONFIG_QCOM_HFPLL) += hfpll.o
diff --git a/drivers/clk/qcom/gcc-sm8150.c b/drivers/clk/qcom/gcc-sm8150.c
new file mode 100644
index 000000000000..12ca2d14797f
--- /dev/null
+++ b/drivers/clk/qcom/gcc-sm8150.c
@@ -0,0 +1,3588 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2017-2019, The Linux Foundation. All rights reserved.
+
+#include <linux/kernel.h>
+#include <linux/bitops.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/clk-provider.h>
+#include <linux/regmap.h>
+#include <linux/reset-controller.h>
+
+#include <dt-bindings/clock/qcom,gcc-sm8150.h>
+
+#include "common.h"
+#include "clk-alpha-pll.h"
+#include "clk-branch.h"
+#include "clk-pll.h"
+#include "clk-rcg.h"
+#include "clk-regmap.h"
+#include "reset.h"
+
+enum {
+ P_BI_TCXO,
+ P_AUD_REF_CLK,
+ P_CORE_BI_PLL_TEST_SE,
+ P_GPLL0_OUT_EVEN,
+ P_GPLL0_OUT_MAIN,
+ P_GPLL7_OUT_MAIN,
+ P_GPLL9_OUT_MAIN,
+ P_SLEEP_CLK,
+};
+
+static const struct pll_vco trion_vco[] = {
+ { 249600000, 2000000000, 0 },
+};
+
+static struct clk_alpha_pll gpll0 = {
+ .offset = 0x0,
+ .vco_table = trion_vco,
+ .num_vco = ARRAY_SIZE(trion_vco),
+ .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_TRION],
+ .clkr = {
+ .enable_reg = 0x52000,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gpll0",
+ .parent_data = &(const struct clk_parent_data){
+ .fw_name = "bi_tcxo",
+ .name = "bi_tcxo",
+ },
+ .num_parents = 1,
+ .ops = &clk_trion_fixed_pll_ops,
+ },
+ },
+};
+
+static const struct clk_div_table post_div_table_trion_even[] = {
+ { 0x0, 1 },
+ { 0x1, 2 },
+ { 0x3, 4 },
+ { 0x7, 8 },
+ { }
+};
+
+static struct clk_alpha_pll_postdiv gpll0_out_even = {
+ .offset = 0x0,
+ .post_div_shift = 8,
+ .post_div_table = post_div_table_trion_even,
+ .num_post_div = ARRAY_SIZE(post_div_table_trion_even),
+ .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_TRION],
+ .width = 4,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "gpll0_out_even",
+ .parent_data = &(const struct clk_parent_data){
+ .fw_name = "bi_tcxo",
+ .name = "bi_tcxo",
+ },
+ .num_parents = 1,
+ .ops = &clk_trion_pll_postdiv_ops,
+ },
+};
+
+static struct clk_alpha_pll gpll7 = {
+ .offset = 0x1a000,
+ .vco_table = trion_vco,
+ .num_vco = ARRAY_SIZE(trion_vco),
+ .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_TRION],
+ .clkr = {
+ .enable_reg = 0x52000,
+ .enable_mask = BIT(7),
+ .hw.init = &(struct clk_init_data){
+ .name = "gpll7",
+ .parent_data = &(const struct clk_parent_data){
+ .fw_name = "bi_tcxo",
+ .name = "bi_tcxo",
+ },
+ .num_parents = 1,
+ .ops = &clk_trion_fixed_pll_ops,
+ },
+ },
+};
+
+static struct clk_alpha_pll gpll9 = {
+ .offset = 0x1c000,
+ .vco_table = trion_vco,
+ .num_vco = ARRAY_SIZE(trion_vco),
+ .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_TRION],
+ .clkr = {
+ .enable_reg = 0x52000,
+ .enable_mask = BIT(9),
+ .hw.init = &(struct clk_init_data){
+ .name = "gpll9",
+ .parent_data = &(const struct clk_parent_data){
+ .fw_name = "bi_tcxo",
+ .name = "bi_tcxo",
+ },
+ .num_parents = 1,
+ .ops = &clk_trion_fixed_pll_ops,
+ },
+ },
+};
+
+static const struct parent_map gcc_parent_map_0[] = {
+ { P_BI_TCXO, 0 },
+ { P_GPLL0_OUT_MAIN, 1 },
+ { P_GPLL0_OUT_EVEN, 6 },
+ { P_CORE_BI_PLL_TEST_SE, 7 },
+};
+
+static const struct clk_parent_data gcc_parents_0[] = {
+ { .fw_name = "bi_tcxo", .name = "bi_tcxo" },
+ { .hw = &gpll0.clkr.hw },
+ { .hw = &gpll0_out_even.clkr.hw },
+ { .fw_name = "core_bi_pll_test_se" },
+};
+
+static const struct parent_map gcc_parent_map_1[] = {
+ { P_BI_TCXO, 0 },
+ { P_GPLL0_OUT_MAIN, 1 },
+ { P_SLEEP_CLK, 5 },
+ { P_GPLL0_OUT_EVEN, 6 },
+ { P_CORE_BI_PLL_TEST_SE, 7 },
+};
+
+static const struct clk_parent_data gcc_parents_1[] = {
+ { .fw_name = "bi_tcxo", .name = "bi_tcxo" },
+ { .hw = &gpll0.clkr.hw },
+ { .fw_name = "sleep_clk", .name = "sleep_clk" },
+ { .hw = &gpll0_out_even.clkr.hw },
+ { .fw_name = "core_bi_pll_test_se" },
+};
+
+static const struct parent_map gcc_parent_map_2[] = {
+ { P_BI_TCXO, 0 },
+ { P_SLEEP_CLK, 5 },
+ { P_CORE_BI_PLL_TEST_SE, 7 },
+};
+
+static const struct clk_parent_data gcc_parents_2[] = {
+ { .fw_name = "bi_tcxo", .name = "bi_tcxo" },
+ { .fw_name = "sleep_clk", .name = "sleep_clk" },
+ { .fw_name = "core_bi_pll_test_se" },
+};
+
+static const struct parent_map gcc_parent_map_3[] = {
+ { P_BI_TCXO, 0 },
+ { P_GPLL0_OUT_MAIN, 1 },
+ { P_CORE_BI_PLL_TEST_SE, 7 },
+};
+
+static const struct clk_parent_data gcc_parents_3[] = {
+ { .fw_name = "bi_tcxo", .name = "bi_tcxo" },
+ { .hw = &gpll0.clkr.hw },
+ { .fw_name = "core_bi_pll_test_se"},
+};
+
+static const struct parent_map gcc_parent_map_4[] = {
+ { P_BI_TCXO, 0 },
+ { P_CORE_BI_PLL_TEST_SE, 7 },
+};
+
+static const struct clk_parent_data gcc_parents_4[] = {
+ { .fw_name = "bi_tcxo", .name = "bi_tcxo" },
+ { .fw_name = "core_bi_pll_test_se" },
+};
+
+static const struct parent_map gcc_parent_map_5[] = {
+ { P_BI_TCXO, 0 },
+ { P_GPLL0_OUT_MAIN, 1 },
+ { P_GPLL7_OUT_MAIN, 3 },
+ { P_GPLL0_OUT_EVEN, 6 },
+ { P_CORE_BI_PLL_TEST_SE, 7 },
+};
+
+static const struct clk_parent_data gcc_parents_5[] = {
+ { .fw_name = "bi_tcxo", .name = "bi_tcxo" },
+ { .hw = &gpll0.clkr.hw },
+ { .hw = &gpll7.clkr.hw },
+ { .hw = &gpll0_out_even.clkr.hw },
+ { .fw_name = "core_bi_pll_test_se" },
+};
+
+static const struct parent_map gcc_parent_map_6[] = {
+ { P_BI_TCXO, 0 },
+ { P_GPLL0_OUT_MAIN, 1 },
+ { P_GPLL9_OUT_MAIN, 2 },
+ { P_GPLL0_OUT_EVEN, 6 },
+ { P_CORE_BI_PLL_TEST_SE, 7 },
+};
+
+static const struct clk_parent_data gcc_parents_6[] = {
+ { .fw_name = "bi_tcxo", .name = "bi_tcxo" },
+ { .hw = &gpll0.clkr.hw },
+ { .hw = &gpll9.clkr.hw },
+ { .hw = &gpll0_out_even.clkr.hw },
+ { .fw_name = "core_bi_pll_test_se" },
+};
+
+static const struct parent_map gcc_parent_map_7[] = {
+ { P_BI_TCXO, 0 },
+ { P_GPLL0_OUT_MAIN, 1 },
+ { P_AUD_REF_CLK, 2 },
+ { P_GPLL0_OUT_EVEN, 6 },
+ { P_CORE_BI_PLL_TEST_SE, 7 },
+};
+
+static const struct clk_parent_data gcc_parents_7[] = {
+ { .fw_name = "bi_tcxo", .name = "bi_tcxo" },
+ { .hw = &gpll0.clkr.hw },
+ { .fw_name = "aud_ref_clk", .name = "aud_ref_clk" },
+ { .hw = &gpll0_out_even.clkr.hw },
+ { .fw_name = "core_bi_pll_test_se" },
+};
+
+static const struct freq_tbl ftbl_gcc_cpuss_ahb_clk_src[] = {
+ F(19200000, P_BI_TCXO, 1, 0, 0),
+ F(50000000, P_GPLL0_OUT_MAIN, 12, 0, 0),
+ F(100000000, P_GPLL0_OUT_MAIN, 6, 0, 0),
+ { }
+};
+
+static struct clk_rcg2 gcc_cpuss_ahb_clk_src = {
+ .cmd_rcgr = 0x48014,
+ .mnd_width = 0,
+ .hid_width = 5,
+ .parent_map = gcc_parent_map_0,
+ .freq_tbl = ftbl_gcc_cpuss_ahb_clk_src,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "gcc_cpuss_ahb_clk_src",
+ .parent_data = gcc_parents_0,
+ .num_parents = 4,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static const struct freq_tbl ftbl_gcc_emac_ptp_clk_src[] = {
+ F(19200000, P_BI_TCXO, 1, 0, 0),
+ F(50000000, P_GPLL0_OUT_EVEN, 6, 0, 0),
+ F(125000000, P_GPLL7_OUT_MAIN, 4, 0, 0),
+ F(250000000, P_GPLL7_OUT_MAIN, 2, 0, 0),
+ { }
+};
+
+static struct clk_rcg2 gcc_emac_ptp_clk_src = {
+ .cmd_rcgr = 0x6038,
+ .mnd_width = 0,
+ .hid_width = 5,
+ .parent_map = gcc_parent_map_5,
+ .freq_tbl = ftbl_gcc_emac_ptp_clk_src,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "gcc_emac_ptp_clk_src",
+ .parent_data = gcc_parents_5,
+ .num_parents = 5,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static const struct freq_tbl ftbl_gcc_emac_rgmii_clk_src[] = {
+ F(2500000, P_BI_TCXO, 1, 25, 192),
+ F(5000000, P_BI_TCXO, 1, 25, 96),
+ F(19200000, P_BI_TCXO, 1, 0, 0),
+ F(25000000, P_GPLL0_OUT_EVEN, 12, 0, 0),
+ F(50000000, P_GPLL0_OUT_EVEN, 6, 0, 0),
+ F(125000000, P_GPLL7_OUT_MAIN, 4, 0, 0),
+ F(250000000, P_GPLL7_OUT_MAIN, 2, 0, 0),
+ { }
+};
+
+static struct clk_rcg2 gcc_emac_rgmii_clk_src = {
+ .cmd_rcgr = 0x601c,
+ .mnd_width = 8,
+ .hid_width = 5,
+ .parent_map = gcc_parent_map_5,
+ .freq_tbl = ftbl_gcc_emac_rgmii_clk_src,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "gcc_emac_rgmii_clk_src",
+ .parent_data = gcc_parents_5,
+ .num_parents = 5,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static const struct freq_tbl ftbl_gcc_gp1_clk_src[] = {
+ F(19200000, P_BI_TCXO, 1, 0, 0),
+ F(25000000, P_GPLL0_OUT_EVEN, 12, 0, 0),
+ F(50000000, P_GPLL0_OUT_EVEN, 6, 0, 0),
+ F(100000000, P_GPLL0_OUT_MAIN, 6, 0, 0),
+ F(200000000, P_GPLL0_OUT_MAIN, 3, 0, 0),
+ { }
+};
+
+static struct clk_rcg2 gcc_gp1_clk_src = {
+ .cmd_rcgr = 0x64004,
+ .mnd_width = 8,
+ .hid_width = 5,
+ .parent_map = gcc_parent_map_1,
+ .freq_tbl = ftbl_gcc_gp1_clk_src,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "gcc_gp1_clk_src",
+ .parent_data = gcc_parents_1,
+ .num_parents = 5,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static struct clk_rcg2 gcc_gp2_clk_src = {
+ .cmd_rcgr = 0x65004,
+ .mnd_width = 8,
+ .hid_width = 5,
+ .parent_map = gcc_parent_map_1,
+ .freq_tbl = ftbl_gcc_gp1_clk_src,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "gcc_gp2_clk_src",
+ .parent_data = gcc_parents_1,
+ .num_parents = 5,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static struct clk_rcg2 gcc_gp3_clk_src = {
+ .cmd_rcgr = 0x66004,
+ .mnd_width = 8,
+ .hid_width = 5,
+ .parent_map = gcc_parent_map_1,
+ .freq_tbl = ftbl_gcc_gp1_clk_src,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "gcc_gp3_clk_src",
+ .parent_data = gcc_parents_1,
+ .num_parents = 5,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static const struct freq_tbl ftbl_gcc_pcie_0_aux_clk_src[] = {
+ F(9600000, P_BI_TCXO, 2, 0, 0),
+ F(19200000, P_BI_TCXO, 1, 0, 0),
+ { }
+};
+
+static struct clk_rcg2 gcc_pcie_0_aux_clk_src = {
+ .cmd_rcgr = 0x6b02c,
+ .mnd_width = 16,
+ .hid_width = 5,
+ .parent_map = gcc_parent_map_2,
+ .freq_tbl = ftbl_gcc_pcie_0_aux_clk_src,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "gcc_pcie_0_aux_clk_src",
+ .parent_data = gcc_parents_2,
+ .num_parents = 3,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static struct clk_rcg2 gcc_pcie_1_aux_clk_src = {
+ .cmd_rcgr = 0x8d02c,
+ .mnd_width = 16,
+ .hid_width = 5,
+ .parent_map = gcc_parent_map_2,
+ .freq_tbl = ftbl_gcc_pcie_0_aux_clk_src,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "gcc_pcie_1_aux_clk_src",
+ .parent_data = gcc_parents_2,
+ .num_parents = 3,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static const struct freq_tbl ftbl_gcc_pcie_phy_refgen_clk_src[] = {
+ F(19200000, P_BI_TCXO, 1, 0, 0),
+ F(100000000, P_GPLL0_OUT_MAIN, 6, 0, 0),
+ { }
+};
+
+static struct clk_rcg2 gcc_pcie_phy_refgen_clk_src = {
+ .cmd_rcgr = 0x6f014,
+ .mnd_width = 0,
+ .hid_width = 5,
+ .parent_map = gcc_parent_map_0,
+ .freq_tbl = ftbl_gcc_pcie_phy_refgen_clk_src,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "gcc_pcie_phy_refgen_clk_src",
+ .parent_data = gcc_parents_0,
+ .num_parents = 4,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static const struct freq_tbl ftbl_gcc_pdm2_clk_src[] = {
+ F(9600000, P_BI_TCXO, 2, 0, 0),
+ F(19200000, P_BI_TCXO, 1, 0, 0),
+ F(60000000, P_GPLL0_OUT_MAIN, 10, 0, 0),
+ { }
+};
+
+static struct clk_rcg2 gcc_pdm2_clk_src = {
+ .cmd_rcgr = 0x33010,
+ .mnd_width = 0,
+ .hid_width = 5,
+ .parent_map = gcc_parent_map_0,
+ .freq_tbl = ftbl_gcc_pdm2_clk_src,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "gcc_pdm2_clk_src",
+ .parent_data = gcc_parents_0,
+ .num_parents = 4,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static const struct freq_tbl ftbl_gcc_qspi_core_clk_src[] = {
+ F(19200000, P_BI_TCXO, 1, 0, 0),
+ F(75000000, P_GPLL0_OUT_EVEN, 4, 0, 0),
+ F(150000000, P_GPLL0_OUT_MAIN, 4, 0, 0),
+ F(300000000, P_GPLL0_OUT_MAIN, 2, 0, 0),
+ { }
+};
+
+static struct clk_rcg2 gcc_qspi_core_clk_src = {
+ .cmd_rcgr = 0x4b008,
+ .mnd_width = 0,
+ .hid_width = 5,
+ .parent_map = gcc_parent_map_0,
+ .freq_tbl = ftbl_gcc_qspi_core_clk_src,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "gcc_qspi_core_clk_src",
+ .parent_data = gcc_parents_0,
+ .num_parents = 4,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static const struct freq_tbl ftbl_gcc_qupv3_wrap0_s0_clk_src[] = {
+ F(7372800, P_GPLL0_OUT_EVEN, 1, 384, 15625),
+ F(14745600, P_GPLL0_OUT_EVEN, 1, 768, 15625),
+ F(19200000, P_BI_TCXO, 1, 0, 0),
+ F(29491200, P_GPLL0_OUT_EVEN, 1, 1536, 15625),
+ F(32000000, P_GPLL0_OUT_EVEN, 1, 8, 75),
+ F(48000000, P_GPLL0_OUT_EVEN, 1, 4, 25),
+ F(64000000, P_GPLL0_OUT_EVEN, 1, 16, 75),
+ F(80000000, P_GPLL0_OUT_EVEN, 1, 4, 15),
+ F(96000000, P_GPLL0_OUT_EVEN, 1, 8, 25),
+ F(100000000, P_GPLL0_OUT_EVEN, 3, 0, 0),
+ F(102400000, P_GPLL0_OUT_EVEN, 1, 128, 375),
+ F(112000000, P_GPLL0_OUT_EVEN, 1, 28, 75),
+ F(117964800, P_GPLL0_OUT_EVEN, 1, 6144, 15625),
+ F(120000000, P_GPLL0_OUT_EVEN, 2.5, 0, 0),
+ F(128000000, P_GPLL0_OUT_MAIN, 1, 16, 75),
+ { }
+};
+
+static struct clk_rcg2 gcc_qupv3_wrap0_s0_clk_src = {
+ .cmd_rcgr = 0x17148,
+ .mnd_width = 16,
+ .hid_width = 5,
+ .parent_map = gcc_parent_map_0,
+ .freq_tbl = ftbl_gcc_qupv3_wrap0_s0_clk_src,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "gcc_qupv3_wrap0_s0_clk_src",
+ .parent_data = gcc_parents_0,
+ .num_parents = 4,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static struct clk_rcg2 gcc_qupv3_wrap0_s1_clk_src = {
+ .cmd_rcgr = 0x17278,
+ .mnd_width = 16,
+ .hid_width = 5,
+ .parent_map = gcc_parent_map_0,
+ .freq_tbl = ftbl_gcc_qupv3_wrap0_s0_clk_src,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "gcc_qupv3_wrap0_s1_clk_src",
+ .parent_data = gcc_parents_0,
+ .num_parents = 4,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static struct clk_rcg2 gcc_qupv3_wrap0_s2_clk_src = {
+ .cmd_rcgr = 0x173a8,
+ .mnd_width = 16,
+ .hid_width = 5,
+ .parent_map = gcc_parent_map_0,
+ .freq_tbl = ftbl_gcc_qupv3_wrap0_s0_clk_src,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "gcc_qupv3_wrap0_s2_clk_src",
+ .parent_data = gcc_parents_0,
+ .num_parents = 4,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static struct clk_rcg2 gcc_qupv3_wrap0_s3_clk_src = {
+ .cmd_rcgr = 0x174d8,
+ .mnd_width = 16,
+ .hid_width = 5,
+ .parent_map = gcc_parent_map_0,
+ .freq_tbl = ftbl_gcc_qupv3_wrap0_s0_clk_src,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "gcc_qupv3_wrap0_s3_clk_src",
+ .parent_data = gcc_parents_0,
+ .num_parents = 4,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static struct clk_rcg2 gcc_qupv3_wrap0_s4_clk_src = {
+ .cmd_rcgr = 0x17608,
+ .mnd_width = 16,
+ .hid_width = 5,
+ .parent_map = gcc_parent_map_0,
+ .freq_tbl = ftbl_gcc_qupv3_wrap0_s0_clk_src,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "gcc_qupv3_wrap0_s4_clk_src",
+ .parent_data = gcc_parents_0,
+ .num_parents = 4,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static struct clk_rcg2 gcc_qupv3_wrap0_s5_clk_src = {
+ .cmd_rcgr = 0x17738,
+ .mnd_width = 16,
+ .hid_width = 5,
+ .parent_map = gcc_parent_map_0,
+ .freq_tbl = ftbl_gcc_qupv3_wrap0_s0_clk_src,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "gcc_qupv3_wrap0_s5_clk_src",
+ .parent_data = gcc_parents_0,
+ .num_parents = 4,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static struct clk_rcg2 gcc_qupv3_wrap0_s6_clk_src = {
+ .cmd_rcgr = 0x17868,
+ .mnd_width = 16,
+ .hid_width = 5,
+ .parent_map = gcc_parent_map_0,
+ .freq_tbl = ftbl_gcc_qupv3_wrap0_s0_clk_src,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "gcc_qupv3_wrap0_s6_clk_src",
+ .parent_data = gcc_parents_0,
+ .num_parents = 4,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static struct clk_rcg2 gcc_qupv3_wrap0_s7_clk_src = {
+ .cmd_rcgr = 0x17998,
+ .mnd_width = 16,
+ .hid_width = 5,
+ .parent_map = gcc_parent_map_0,
+ .freq_tbl = ftbl_gcc_qupv3_wrap0_s0_clk_src,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "gcc_qupv3_wrap0_s7_clk_src",
+ .parent_data = gcc_parents_0,
+ .num_parents = 4,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static struct clk_rcg2 gcc_qupv3_wrap1_s0_clk_src = {
+ .cmd_rcgr = 0x18148,
+ .mnd_width = 16,
+ .hid_width = 5,
+ .parent_map = gcc_parent_map_0,
+ .freq_tbl = ftbl_gcc_qupv3_wrap0_s0_clk_src,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "gcc_qupv3_wrap1_s0_clk_src",
+ .parent_data = gcc_parents_0,
+ .num_parents = 4,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static struct clk_rcg2 gcc_qupv3_wrap1_s1_clk_src = {
+ .cmd_rcgr = 0x18278,
+ .mnd_width = 16,
+ .hid_width = 5,
+ .parent_map = gcc_parent_map_0,
+ .freq_tbl = ftbl_gcc_qupv3_wrap0_s0_clk_src,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "gcc_qupv3_wrap1_s1_clk_src",
+ .parent_data = gcc_parents_0,
+ .num_parents = 4,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static struct clk_rcg2 gcc_qupv3_wrap1_s2_clk_src = {
+ .cmd_rcgr = 0x183a8,
+ .mnd_width = 16,
+ .hid_width = 5,
+ .parent_map = gcc_parent_map_0,
+ .freq_tbl = ftbl_gcc_qupv3_wrap0_s0_clk_src,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "gcc_qupv3_wrap1_s2_clk_src",
+ .parent_data = gcc_parents_0,
+ .num_parents = 4,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static struct clk_rcg2 gcc_qupv3_wrap1_s3_clk_src = {
+ .cmd_rcgr = 0x184d8,
+ .mnd_width = 16,
+ .hid_width = 5,
+ .parent_map = gcc_parent_map_0,
+ .freq_tbl = ftbl_gcc_qupv3_wrap0_s0_clk_src,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "gcc_qupv3_wrap1_s3_clk_src",
+ .parent_data = gcc_parents_0,
+ .num_parents = 4,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static struct clk_rcg2 gcc_qupv3_wrap1_s4_clk_src = {
+ .cmd_rcgr = 0x18608,
+ .mnd_width = 16,
+ .hid_width = 5,
+ .parent_map = gcc_parent_map_0,
+ .freq_tbl = ftbl_gcc_qupv3_wrap0_s0_clk_src,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "gcc_qupv3_wrap1_s4_clk_src",
+ .parent_data = gcc_parents_0,
+ .num_parents = 4,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static struct clk_rcg2 gcc_qupv3_wrap1_s5_clk_src = {
+ .cmd_rcgr = 0x18738,
+ .mnd_width = 16,
+ .hid_width = 5,
+ .parent_map = gcc_parent_map_0,
+ .freq_tbl = ftbl_gcc_qupv3_wrap0_s0_clk_src,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "gcc_qupv3_wrap1_s5_clk_src",
+ .parent_data = gcc_parents_0,
+ .num_parents = 4,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static struct clk_rcg2 gcc_qupv3_wrap2_s0_clk_src = {
+ .cmd_rcgr = 0x1e148,
+ .mnd_width = 16,
+ .hid_width = 5,
+ .parent_map = gcc_parent_map_0,
+ .freq_tbl = ftbl_gcc_qupv3_wrap0_s0_clk_src,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "gcc_qupv3_wrap2_s0_clk_src",
+ .parent_data = gcc_parents_0,
+ .num_parents = 4,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static struct clk_rcg2 gcc_qupv3_wrap2_s1_clk_src = {
+ .cmd_rcgr = 0x1e278,
+ .mnd_width = 16,
+ .hid_width = 5,
+ .parent_map = gcc_parent_map_0,
+ .freq_tbl = ftbl_gcc_qupv3_wrap0_s0_clk_src,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "gcc_qupv3_wrap2_s1_clk_src",
+ .parent_data = gcc_parents_0,
+ .num_parents = 4,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static struct clk_rcg2 gcc_qupv3_wrap2_s2_clk_src = {
+ .cmd_rcgr = 0x1e3a8,
+ .mnd_width = 16,
+ .hid_width = 5,
+ .parent_map = gcc_parent_map_0,
+ .freq_tbl = ftbl_gcc_qupv3_wrap0_s0_clk_src,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "gcc_qupv3_wrap2_s2_clk_src",
+ .parent_data = gcc_parents_0,
+ .num_parents = 4,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static struct clk_rcg2 gcc_qupv3_wrap2_s3_clk_src = {
+ .cmd_rcgr = 0x1e4d8,
+ .mnd_width = 16,
+ .hid_width = 5,
+ .parent_map = gcc_parent_map_0,
+ .freq_tbl = ftbl_gcc_qupv3_wrap0_s0_clk_src,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "gcc_qupv3_wrap2_s3_clk_src",
+ .parent_data = gcc_parents_0,
+ .num_parents = 4,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static struct clk_rcg2 gcc_qupv3_wrap2_s4_clk_src = {
+ .cmd_rcgr = 0x1e608,
+ .mnd_width = 16,
+ .hid_width = 5,
+ .parent_map = gcc_parent_map_0,
+ .freq_tbl = ftbl_gcc_qupv3_wrap0_s0_clk_src,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "gcc_qupv3_wrap2_s4_clk_src",
+ .parent_data = gcc_parents_0,
+ .num_parents = 4,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static struct clk_rcg2 gcc_qupv3_wrap2_s5_clk_src = {
+ .cmd_rcgr = 0x1e738,
+ .mnd_width = 16,
+ .hid_width = 5,
+ .parent_map = gcc_parent_map_0,
+ .freq_tbl = ftbl_gcc_qupv3_wrap0_s0_clk_src,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "gcc_qupv3_wrap2_s5_clk_src",
+ .parent_data = gcc_parents_0,
+ .num_parents = 4,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static const struct freq_tbl ftbl_gcc_sdcc2_apps_clk_src[] = {
+ F(400000, P_BI_TCXO, 12, 1, 4),
+ F(9600000, P_BI_TCXO, 2, 0, 0),
+ F(19200000, P_BI_TCXO, 1, 0, 0),
+ F(25000000, P_GPLL0_OUT_MAIN, 12, 1, 2),
+ F(50000000, P_GPLL0_OUT_MAIN, 12, 0, 0),
+ F(100000000, P_GPLL0_OUT_MAIN, 6, 0, 0),
+ F(202000000, P_GPLL9_OUT_MAIN, 4, 0, 0),
+ { }
+};
+
+static struct clk_rcg2 gcc_sdcc2_apps_clk_src = {
+ .cmd_rcgr = 0x1400c,
+ .mnd_width = 8,
+ .hid_width = 5,
+ .parent_map = gcc_parent_map_6,
+ .freq_tbl = ftbl_gcc_sdcc2_apps_clk_src,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "gcc_sdcc2_apps_clk_src",
+ .parent_data = gcc_parents_6,
+ .num_parents = 5,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static const struct freq_tbl ftbl_gcc_sdcc4_apps_clk_src[] = {
+ F(400000, P_BI_TCXO, 12, 1, 4),
+ F(9600000, P_BI_TCXO, 2, 0, 0),
+ F(19200000, P_BI_TCXO, 1, 0, 0),
+ F(25000000, P_GPLL0_OUT_MAIN, 12, 1, 2),
+ F(50000000, P_GPLL0_OUT_MAIN, 12, 0, 0),
+ F(100000000, P_GPLL0_OUT_MAIN, 6, 0, 0),
+ { }
+};
+
+static struct clk_rcg2 gcc_sdcc4_apps_clk_src = {
+ .cmd_rcgr = 0x1600c,
+ .mnd_width = 8,
+ .hid_width = 5,
+ .parent_map = gcc_parent_map_3,
+ .freq_tbl = ftbl_gcc_sdcc4_apps_clk_src,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "gcc_sdcc4_apps_clk_src",
+ .parent_data = gcc_parents_3,
+ .num_parents = 3,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static const struct freq_tbl ftbl_gcc_tsif_ref_clk_src[] = {
+ F(105495, P_BI_TCXO, 2, 1, 91),
+ { }
+};
+
+static struct clk_rcg2 gcc_tsif_ref_clk_src = {
+ .cmd_rcgr = 0x36010,
+ .mnd_width = 8,
+ .hid_width = 5,
+ .parent_map = gcc_parent_map_7,
+ .freq_tbl = ftbl_gcc_tsif_ref_clk_src,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "gcc_tsif_ref_clk_src",
+ .parent_data = gcc_parents_7,
+ .num_parents = 5,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static const struct freq_tbl ftbl_gcc_ufs_card_axi_clk_src[] = {
+ F(25000000, P_GPLL0_OUT_EVEN, 12, 0, 0),
+ F(50000000, P_GPLL0_OUT_EVEN, 6, 0, 0),
+ F(100000000, P_GPLL0_OUT_MAIN, 6, 0, 0),
+ F(200000000, P_GPLL0_OUT_MAIN, 3, 0, 0),
+ F(240000000, P_GPLL0_OUT_MAIN, 2.5, 0, 0),
+ { }
+};
+
+static struct clk_rcg2 gcc_ufs_card_axi_clk_src = {
+ .cmd_rcgr = 0x75020,
+ .mnd_width = 8,
+ .hid_width = 5,
+ .parent_map = gcc_parent_map_0,
+ .freq_tbl = ftbl_gcc_ufs_card_axi_clk_src,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "gcc_ufs_card_axi_clk_src",
+ .parent_data = gcc_parents_0,
+ .num_parents = 4,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static const struct freq_tbl ftbl_gcc_ufs_card_ice_core_clk_src[] = {
+ F(37500000, P_GPLL0_OUT_EVEN, 8, 0, 0),
+ F(75000000, P_GPLL0_OUT_EVEN, 4, 0, 0),
+ F(150000000, P_GPLL0_OUT_MAIN, 4, 0, 0),
+ F(300000000, P_GPLL0_OUT_MAIN, 2, 0, 0),
+ { }
+};
+
+static struct clk_rcg2 gcc_ufs_card_ice_core_clk_src = {
+ .cmd_rcgr = 0x75060,
+ .mnd_width = 0,
+ .hid_width = 5,
+ .parent_map = gcc_parent_map_0,
+ .freq_tbl = ftbl_gcc_ufs_card_ice_core_clk_src,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "gcc_ufs_card_ice_core_clk_src",
+ .parent_data = gcc_parents_0,
+ .num_parents = 4,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static const struct freq_tbl ftbl_gcc_ufs_card_phy_aux_clk_src[] = {
+ F(19200000, P_BI_TCXO, 1, 0, 0),
+ { }
+};
+
+static struct clk_rcg2 gcc_ufs_card_phy_aux_clk_src = {
+ .cmd_rcgr = 0x75094,
+ .mnd_width = 0,
+ .hid_width = 5,
+ .parent_map = gcc_parent_map_4,
+ .freq_tbl = ftbl_gcc_ufs_card_phy_aux_clk_src,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "gcc_ufs_card_phy_aux_clk_src",
+ .parent_data = gcc_parents_4,
+ .num_parents = 2,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static const struct freq_tbl ftbl_gcc_ufs_card_unipro_core_clk_src[] = {
+ F(37500000, P_GPLL0_OUT_EVEN, 8, 0, 0),
+ F(75000000, P_GPLL0_OUT_MAIN, 8, 0, 0),
+ F(150000000, P_GPLL0_OUT_MAIN, 4, 0, 0),
+ { }
+};
+
+static struct clk_rcg2 gcc_ufs_card_unipro_core_clk_src = {
+ .cmd_rcgr = 0x75078,
+ .mnd_width = 0,
+ .hid_width = 5,
+ .parent_map = gcc_parent_map_0,
+ .freq_tbl = ftbl_gcc_ufs_card_unipro_core_clk_src,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "gcc_ufs_card_unipro_core_clk_src",
+ .parent_data = gcc_parents_0,
+ .num_parents = 4,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static const struct freq_tbl ftbl_gcc_ufs_phy_axi_clk_src[] = {
+ F(25000000, P_GPLL0_OUT_EVEN, 12, 0, 0),
+ F(37500000, P_GPLL0_OUT_EVEN, 8, 0, 0),
+ F(75000000, P_GPLL0_OUT_EVEN, 4, 0, 0),
+ F(150000000, P_GPLL0_OUT_MAIN, 4, 0, 0),
+ F(300000000, P_GPLL0_OUT_MAIN, 2, 0, 0),
+ { }
+};
+
+static struct clk_rcg2 gcc_ufs_phy_axi_clk_src = {
+ .cmd_rcgr = 0x77020,
+ .mnd_width = 8,
+ .hid_width = 5,
+ .parent_map = gcc_parent_map_0,
+ .freq_tbl = ftbl_gcc_ufs_phy_axi_clk_src,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "gcc_ufs_phy_axi_clk_src",
+ .parent_data = gcc_parents_0,
+ .num_parents = 4,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static struct clk_rcg2 gcc_ufs_phy_ice_core_clk_src = {
+ .cmd_rcgr = 0x77060,
+ .mnd_width = 0,
+ .hid_width = 5,
+ .parent_map = gcc_parent_map_0,
+ .freq_tbl = ftbl_gcc_ufs_card_ice_core_clk_src,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "gcc_ufs_phy_ice_core_clk_src",
+ .parent_data = gcc_parents_0,
+ .num_parents = 4,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static struct clk_rcg2 gcc_ufs_phy_phy_aux_clk_src = {
+ .cmd_rcgr = 0x77094,
+ .mnd_width = 0,
+ .hid_width = 5,
+ .parent_map = gcc_parent_map_4,
+ .freq_tbl = ftbl_gcc_pcie_0_aux_clk_src,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "gcc_ufs_phy_phy_aux_clk_src",
+ .parent_data = gcc_parents_4,
+ .num_parents = 2,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static struct clk_rcg2 gcc_ufs_phy_unipro_core_clk_src = {
+ .cmd_rcgr = 0x77078,
+ .mnd_width = 0,
+ .hid_width = 5,
+ .parent_map = gcc_parent_map_0,
+ .freq_tbl = ftbl_gcc_ufs_card_ice_core_clk_src,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "gcc_ufs_phy_unipro_core_clk_src",
+ .parent_data = gcc_parents_0,
+ .num_parents = 4,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static const struct freq_tbl ftbl_gcc_usb30_prim_master_clk_src[] = {
+ F(33333333, P_GPLL0_OUT_EVEN, 9, 0, 0),
+ F(66666667, P_GPLL0_OUT_EVEN, 4.5, 0, 0),
+ F(133333333, P_GPLL0_OUT_MAIN, 4.5, 0, 0),
+ F(200000000, P_GPLL0_OUT_MAIN, 3, 0, 0),
+ F(240000000, P_GPLL0_OUT_MAIN, 2.5, 0, 0),
+ { }
+};
+
+static struct clk_rcg2 gcc_usb30_prim_master_clk_src = {
+ .cmd_rcgr = 0xf01c,
+ .mnd_width = 8,
+ .hid_width = 5,
+ .parent_map = gcc_parent_map_0,
+ .freq_tbl = ftbl_gcc_usb30_prim_master_clk_src,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "gcc_usb30_prim_master_clk_src",
+ .parent_data = gcc_parents_0,
+ .num_parents = 4,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static const struct freq_tbl ftbl_gcc_usb30_prim_mock_utmi_clk_src[] = {
+ F(19200000, P_BI_TCXO, 1, 0, 0),
+ F(20000000, P_GPLL0_OUT_EVEN, 15, 0, 0),
+ F(60000000, P_GPLL0_OUT_EVEN, 5, 0, 0),
+ { }
+};
+
+static struct clk_rcg2 gcc_usb30_prim_mock_utmi_clk_src = {
+ .cmd_rcgr = 0xf034,
+ .mnd_width = 0,
+ .hid_width = 5,
+ .parent_map = gcc_parent_map_0,
+ .freq_tbl = ftbl_gcc_usb30_prim_mock_utmi_clk_src,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "gcc_usb30_prim_mock_utmi_clk_src",
+ .parent_data = gcc_parents_0,
+ .num_parents = 4,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static struct clk_rcg2 gcc_usb30_sec_master_clk_src = {
+ .cmd_rcgr = 0x1001c,
+ .mnd_width = 8,
+ .hid_width = 5,
+ .parent_map = gcc_parent_map_0,
+ .freq_tbl = ftbl_gcc_usb30_prim_master_clk_src,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "gcc_usb30_sec_master_clk_src",
+ .parent_data = gcc_parents_0,
+ .num_parents = 4,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static struct clk_rcg2 gcc_usb30_sec_mock_utmi_clk_src = {
+ .cmd_rcgr = 0x10034,
+ .mnd_width = 0,
+ .hid_width = 5,
+ .parent_map = gcc_parent_map_0,
+ .freq_tbl = ftbl_gcc_usb30_prim_mock_utmi_clk_src,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "gcc_usb30_sec_mock_utmi_clk_src",
+ .parent_data = gcc_parents_0,
+ .num_parents = 4,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static struct clk_rcg2 gcc_usb3_prim_phy_aux_clk_src = {
+ .cmd_rcgr = 0xf060,
+ .mnd_width = 0,
+ .hid_width = 5,
+ .parent_map = gcc_parent_map_2,
+ .freq_tbl = ftbl_gcc_ufs_card_phy_aux_clk_src,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "gcc_usb3_prim_phy_aux_clk_src",
+ .parent_data = gcc_parents_2,
+ .num_parents = 3,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static struct clk_rcg2 gcc_usb3_sec_phy_aux_clk_src = {
+ .cmd_rcgr = 0x10060,
+ .mnd_width = 0,
+ .hid_width = 5,
+ .parent_map = gcc_parent_map_2,
+ .freq_tbl = ftbl_gcc_ufs_card_phy_aux_clk_src,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "gcc_usb3_sec_phy_aux_clk_src",
+ .parent_data = gcc_parents_2,
+ .num_parents = 3,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static struct clk_branch gcc_aggre_noc_pcie_tbu_clk = {
+ .halt_reg = 0x90018,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x90018,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_aggre_noc_pcie_tbu_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_aggre_ufs_card_axi_clk = {
+ .halt_reg = 0x750c0,
+ .halt_check = BRANCH_HALT,
+ .hwcg_reg = 0x750c0,
+ .hwcg_bit = 1,
+ .clkr = {
+ .enable_reg = 0x750c0,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_aggre_ufs_card_axi_clk",
+ .parent_hws = (const struct clk_hw *[]){
+ &gcc_ufs_card_axi_clk_src.clkr.hw },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_aggre_ufs_card_axi_hw_ctl_clk = {
+ .halt_reg = 0x750c0,
+ .halt_check = BRANCH_HALT,
+ .hwcg_reg = 0x750c0,
+ .hwcg_bit = 1,
+ .clkr = {
+ .enable_reg = 0x750c0,
+ .enable_mask = BIT(1),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_aggre_ufs_card_axi_hw_ctl_clk",
+ .parent_hws = (const struct clk_hw *[]){
+ &gcc_aggre_ufs_card_axi_clk.clkr.hw },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch_simple_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_aggre_ufs_phy_axi_clk = {
+ .halt_reg = 0x770c0,
+ .halt_check = BRANCH_HALT,
+ .hwcg_reg = 0x770c0,
+ .hwcg_bit = 1,
+ .clkr = {
+ .enable_reg = 0x770c0,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_aggre_ufs_phy_axi_clk",
+ .parent_hws = (const struct clk_hw *[]){
+ &gcc_ufs_phy_axi_clk_src.clkr.hw },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_aggre_ufs_phy_axi_hw_ctl_clk = {
+ .halt_reg = 0x770c0,
+ .halt_check = BRANCH_HALT,
+ .hwcg_reg = 0x770c0,
+ .hwcg_bit = 1,
+ .clkr = {
+ .enable_reg = 0x770c0,
+ .enable_mask = BIT(1),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_aggre_ufs_phy_axi_hw_ctl_clk",
+ .parent_hws = (const struct clk_hw *[]){
+ &gcc_aggre_ufs_phy_axi_clk.clkr.hw },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch_simple_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_aggre_usb3_prim_axi_clk = {
+ .halt_reg = 0xf07c,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0xf07c,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_aggre_usb3_prim_axi_clk",
+ .parent_hws = (const struct clk_hw *[]){
+ &gcc_usb30_prim_master_clk_src.clkr.hw },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_aggre_usb3_sec_axi_clk = {
+ .halt_reg = 0x1007c,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x1007c,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_aggre_usb3_sec_axi_clk",
+ .parent_hws = (const struct clk_hw *[]){
+ &gcc_usb30_sec_master_clk_src.clkr.hw },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_boot_rom_ahb_clk = {
+ .halt_reg = 0x38004,
+ .halt_check = BRANCH_HALT_VOTED,
+ .hwcg_reg = 0x38004,
+ .hwcg_bit = 1,
+ .clkr = {
+ .enable_reg = 0x52004,
+ .enable_mask = BIT(10),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_boot_rom_ahb_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+/*
+ * Clock ON depends on external parent 'config noc', so cant poll
+ * delay and also mark as crtitical for camss boot
+ */
+static struct clk_branch gcc_camera_ahb_clk = {
+ .halt_reg = 0xb008,
+ .halt_check = BRANCH_HALT_DELAY,
+ .hwcg_reg = 0xb008,
+ .hwcg_bit = 1,
+ .clkr = {
+ .enable_reg = 0xb008,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_camera_ahb_clk",
+ .flags = CLK_IS_CRITICAL,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_camera_hf_axi_clk = {
+ .halt_reg = 0xb030,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0xb030,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_camera_hf_axi_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_camera_sf_axi_clk = {
+ .halt_reg = 0xb034,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0xb034,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_camera_sf_axi_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+/* XO critical input to camss, so no need to poll */
+static struct clk_branch gcc_camera_xo_clk = {
+ .halt_reg = 0xb044,
+ .halt_check = BRANCH_HALT_DELAY,
+ .clkr = {
+ .enable_reg = 0xb044,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_camera_xo_clk",
+ .flags = CLK_IS_CRITICAL,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_cfg_noc_usb3_prim_axi_clk = {
+ .halt_reg = 0xf078,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0xf078,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_cfg_noc_usb3_prim_axi_clk",
+ .parent_hws = (const struct clk_hw *[]){
+ &gcc_usb30_prim_master_clk_src.clkr.hw },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_cfg_noc_usb3_sec_axi_clk = {
+ .halt_reg = 0x10078,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x10078,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_cfg_noc_usb3_sec_axi_clk",
+ .parent_hws = (const struct clk_hw *[]){
+ &gcc_usb30_sec_master_clk_src.clkr.hw },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_cpuss_ahb_clk = {
+ .halt_reg = 0x48000,
+ .halt_check = BRANCH_HALT_VOTED,
+ .clkr = {
+ .enable_reg = 0x52004,
+ .enable_mask = BIT(21),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_cpuss_ahb_clk",
+ .parent_hws = (const struct clk_hw *[]){
+ &gcc_cpuss_ahb_clk_src.clkr.hw },
+ .num_parents = 1,
+ /* required for cpuss */
+ .flags = CLK_IS_CRITICAL | CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_cpuss_dvm_bus_clk = {
+ .halt_reg = 0x48190,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x48190,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_cpuss_dvm_bus_clk",
+ /* required for cpuss */
+ .flags = CLK_IS_CRITICAL,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_cpuss_gnoc_clk = {
+ .halt_reg = 0x48004,
+ .halt_check = BRANCH_HALT_VOTED,
+ .hwcg_reg = 0x48004,
+ .hwcg_bit = 1,
+ .clkr = {
+ .enable_reg = 0x52004,
+ .enable_mask = BIT(22),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_cpuss_gnoc_clk",
+ /* required for cpuss */
+ .flags = CLK_IS_CRITICAL,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_cpuss_rbcpr_clk = {
+ .halt_reg = 0x48008,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x48008,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_cpuss_rbcpr_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_ddrss_gpu_axi_clk = {
+ .halt_reg = 0x71154,
+ .halt_check = BRANCH_VOTED,
+ .clkr = {
+ .enable_reg = 0x71154,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_ddrss_gpu_axi_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+/*
+ * Clock ON depends on external parent 'config noc', so cant poll
+ * delay and also mark as crtitical for disp boot
+ */
+static struct clk_branch gcc_disp_ahb_clk = {
+ .halt_reg = 0xb00c,
+ .halt_check = BRANCH_HALT_DELAY,
+ .hwcg_reg = 0xb00c,
+ .hwcg_bit = 1,
+ .clkr = {
+ .enable_reg = 0xb00c,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_disp_ahb_clk",
+ .flags = CLK_IS_CRITICAL,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_disp_hf_axi_clk = {
+ .halt_reg = 0xb038,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0xb038,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_disp_hf_axi_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_disp_sf_axi_clk = {
+ .halt_reg = 0xb03c,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0xb03c,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_disp_sf_axi_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+/* XO critical input to disp, so no need to poll */
+static struct clk_branch gcc_disp_xo_clk = {
+ .halt_reg = 0xb048,
+ .halt_check = BRANCH_HALT_DELAY,
+ .clkr = {
+ .enable_reg = 0xb048,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_disp_xo_clk",
+ .flags = CLK_IS_CRITICAL,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_emac_axi_clk = {
+ .halt_reg = 0x6010,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x6010,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_emac_axi_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_emac_ptp_clk = {
+ .halt_reg = 0x6034,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x6034,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_emac_ptp_clk",
+ .parent_hws = (const struct clk_hw *[]){
+ &gcc_emac_ptp_clk_src.clkr.hw },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_emac_rgmii_clk = {
+ .halt_reg = 0x6018,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x6018,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_emac_rgmii_clk",
+ .parent_hws = (const struct clk_hw *[]){
+ &gcc_emac_rgmii_clk_src.clkr.hw },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_emac_slv_ahb_clk = {
+ .halt_reg = 0x6014,
+ .halt_check = BRANCH_HALT,
+ .hwcg_reg = 0x6014,
+ .hwcg_bit = 1,
+ .clkr = {
+ .enable_reg = 0x6014,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_emac_slv_ahb_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_gp1_clk = {
+ .halt_reg = 0x64000,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x64000,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_gp1_clk",
+ .parent_hws = (const struct clk_hw *[]){
+ &gcc_gp1_clk_src.clkr.hw },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_gp2_clk = {
+ .halt_reg = 0x65000,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x65000,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_gp2_clk",
+ .parent_hws = (const struct clk_hw *[]){
+ &gcc_gp2_clk_src.clkr.hw },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_gp3_clk = {
+ .halt_reg = 0x66000,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x66000,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_gp3_clk",
+ .parent_hws = (const struct clk_hw *[]){
+ &gcc_gp3_clk_src.clkr.hw },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_gpu_cfg_ahb_clk = {
+ .halt_reg = 0x71004,
+ .halt_check = BRANCH_HALT,
+ .hwcg_reg = 0x71004,
+ .hwcg_bit = 1,
+ .clkr = {
+ .enable_reg = 0x71004,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_gpu_cfg_ahb_clk",
+ /* required for gpu */
+ .flags = CLK_IS_CRITICAL,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_gpu_iref_clk = {
+ .halt_reg = 0x8c010,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x8c010,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_gpu_iref_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_gpu_memnoc_gfx_clk = {
+ .halt_reg = 0x7100c,
+ .halt_check = BRANCH_VOTED,
+ .clkr = {
+ .enable_reg = 0x7100c,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_gpu_memnoc_gfx_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_gpu_snoc_dvm_gfx_clk = {
+ .halt_reg = 0x71018,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x71018,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_gpu_snoc_dvm_gfx_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_npu_at_clk = {
+ .halt_reg = 0x4d010,
+ .halt_check = BRANCH_VOTED,
+ .clkr = {
+ .enable_reg = 0x4d010,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_npu_at_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_npu_axi_clk = {
+ .halt_reg = 0x4d008,
+ .halt_check = BRANCH_VOTED,
+ .clkr = {
+ .enable_reg = 0x4d008,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_npu_axi_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_npu_cfg_ahb_clk = {
+ .halt_reg = 0x4d004,
+ .halt_check = BRANCH_HALT,
+ .hwcg_reg = 0x4d004,
+ .hwcg_bit = 1,
+ .clkr = {
+ .enable_reg = 0x4d004,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_npu_cfg_ahb_clk",
+ /* required for npu */
+ .flags = CLK_IS_CRITICAL,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_npu_trig_clk = {
+ .halt_reg = 0x4d00c,
+ .halt_check = BRANCH_VOTED,
+ .clkr = {
+ .enable_reg = 0x4d00c,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_npu_trig_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_pcie0_phy_refgen_clk = {
+ .halt_reg = 0x6f02c,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x6f02c,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_pcie0_phy_refgen_clk",
+ .parent_hws = (const struct clk_hw *[]){
+ &gcc_pcie_phy_refgen_clk_src.clkr.hw },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_pcie1_phy_refgen_clk = {
+ .halt_reg = 0x6f030,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x6f030,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_pcie1_phy_refgen_clk",
+ .parent_hws = (const struct clk_hw *[]){
+ &gcc_pcie_phy_refgen_clk_src.clkr.hw },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_pcie_0_aux_clk = {
+ .halt_reg = 0x6b020,
+ .halt_check = BRANCH_HALT_VOTED,
+ .clkr = {
+ .enable_reg = 0x5200c,
+ .enable_mask = BIT(3),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_pcie_0_aux_clk",
+ .parent_hws = (const struct clk_hw *[]){
+ &gcc_pcie_0_aux_clk_src.clkr.hw },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_pcie_0_cfg_ahb_clk = {
+ .halt_reg = 0x6b01c,
+ .halt_check = BRANCH_HALT_VOTED,
+ .hwcg_reg = 0x6b01c,
+ .hwcg_bit = 1,
+ .clkr = {
+ .enable_reg = 0x5200c,
+ .enable_mask = BIT(2),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_pcie_0_cfg_ahb_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_pcie_0_clkref_clk = {
+ .halt_reg = 0x8c00c,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x8c00c,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_pcie_0_clkref_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_pcie_0_mstr_axi_clk = {
+ .halt_reg = 0x6b018,
+ .halt_check = BRANCH_HALT_VOTED,
+ .clkr = {
+ .enable_reg = 0x5200c,
+ .enable_mask = BIT(1),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_pcie_0_mstr_axi_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+/* Clock ON depends on external parent 'PIPE' clock, so dont poll */
+static struct clk_branch gcc_pcie_0_pipe_clk = {
+ .halt_reg = 0x6b024,
+ .halt_check = BRANCH_HALT_DELAY,
+ .clkr = {
+ .enable_reg = 0x5200c,
+ .enable_mask = BIT(4),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_pcie_0_pipe_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_pcie_0_slv_axi_clk = {
+ .halt_reg = 0x6b014,
+ .halt_check = BRANCH_HALT_VOTED,
+ .hwcg_reg = 0x6b014,
+ .hwcg_bit = 1,
+ .clkr = {
+ .enable_reg = 0x5200c,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_pcie_0_slv_axi_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_pcie_0_slv_q2a_axi_clk = {
+ .halt_reg = 0x6b010,
+ .halt_check = BRANCH_HALT_VOTED,
+ .clkr = {
+ .enable_reg = 0x5200c,
+ .enable_mask = BIT(5),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_pcie_0_slv_q2a_axi_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_pcie_1_aux_clk = {
+ .halt_reg = 0x8d020,
+ .halt_check = BRANCH_HALT_VOTED,
+ .clkr = {
+ .enable_reg = 0x52004,
+ .enable_mask = BIT(29),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_pcie_1_aux_clk",
+ .parent_hws = (const struct clk_hw *[]){
+ &gcc_pcie_1_aux_clk_src.clkr.hw },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_pcie_1_cfg_ahb_clk = {
+ .halt_reg = 0x8d01c,
+ .halt_check = BRANCH_HALT_VOTED,
+ .hwcg_reg = 0x8d01c,
+ .hwcg_bit = 1,
+ .clkr = {
+ .enable_reg = 0x52004,
+ .enable_mask = BIT(28),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_pcie_1_cfg_ahb_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_pcie_1_clkref_clk = {
+ .halt_reg = 0x8c02c,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x8c02c,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_pcie_1_clkref_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_pcie_1_mstr_axi_clk = {
+ .halt_reg = 0x8d018,
+ .halt_check = BRANCH_HALT_VOTED,
+ .clkr = {
+ .enable_reg = 0x52004,
+ .enable_mask = BIT(27),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_pcie_1_mstr_axi_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+/* Clock ON depends on external parent 'PIPE' clock, so dont poll */
+static struct clk_branch gcc_pcie_1_pipe_clk = {
+ .halt_reg = 0x8d024,
+ .halt_check = BRANCH_HALT_DELAY,
+ .clkr = {
+ .enable_reg = 0x52004,
+ .enable_mask = BIT(30),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_pcie_1_pipe_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_pcie_1_slv_axi_clk = {
+ .halt_reg = 0x8d014,
+ .halt_check = BRANCH_HALT_VOTED,
+ .hwcg_reg = 0x8d014,
+ .hwcg_bit = 1,
+ .clkr = {
+ .enable_reg = 0x52004,
+ .enable_mask = BIT(26),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_pcie_1_slv_axi_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_pcie_1_slv_q2a_axi_clk = {
+ .halt_reg = 0x8d010,
+ .halt_check = BRANCH_HALT_VOTED,
+ .clkr = {
+ .enable_reg = 0x52004,
+ .enable_mask = BIT(25),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_pcie_1_slv_q2a_axi_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_pcie_phy_aux_clk = {
+ .halt_reg = 0x6f004,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x6f004,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_pcie_phy_aux_clk",
+ .parent_hws = (const struct clk_hw *[]){
+ &gcc_pcie_0_aux_clk_src.clkr.hw },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_pdm2_clk = {
+ .halt_reg = 0x3300c,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x3300c,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_pdm2_clk",
+ .parent_hws = (const struct clk_hw *[]){
+ &gcc_pdm2_clk_src.clkr.hw },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_pdm_ahb_clk = {
+ .halt_reg = 0x33004,
+ .halt_check = BRANCH_HALT,
+ .hwcg_reg = 0x33004,
+ .hwcg_bit = 1,
+ .clkr = {
+ .enable_reg = 0x33004,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_pdm_ahb_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_pdm_xo4_clk = {
+ .halt_reg = 0x33008,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x33008,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_pdm_xo4_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_prng_ahb_clk = {
+ .halt_reg = 0x34004,
+ .halt_check = BRANCH_HALT_VOTED,
+ .clkr = {
+ .enable_reg = 0x52004,
+ .enable_mask = BIT(13),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_prng_ahb_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_qmip_camera_nrt_ahb_clk = {
+ .halt_reg = 0xb018,
+ .halt_check = BRANCH_HALT,
+ .hwcg_reg = 0xb018,
+ .hwcg_bit = 1,
+ .clkr = {
+ .enable_reg = 0xb018,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_qmip_camera_nrt_ahb_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_qmip_camera_rt_ahb_clk = {
+ .halt_reg = 0xb01c,
+ .halt_check = BRANCH_HALT,
+ .hwcg_reg = 0xb01c,
+ .hwcg_bit = 1,
+ .clkr = {
+ .enable_reg = 0xb01c,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_qmip_camera_rt_ahb_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_qmip_disp_ahb_clk = {
+ .halt_reg = 0xb020,
+ .halt_check = BRANCH_HALT,
+ .hwcg_reg = 0xb020,
+ .hwcg_bit = 1,
+ .clkr = {
+ .enable_reg = 0xb020,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_qmip_disp_ahb_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_qmip_video_cvp_ahb_clk = {
+ .halt_reg = 0xb010,
+ .halt_check = BRANCH_HALT,
+ .hwcg_reg = 0xb010,
+ .hwcg_bit = 1,
+ .clkr = {
+ .enable_reg = 0xb010,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_qmip_video_cvp_ahb_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_qmip_video_vcodec_ahb_clk = {
+ .halt_reg = 0xb014,
+ .halt_check = BRANCH_HALT,
+ .hwcg_reg = 0xb014,
+ .hwcg_bit = 1,
+ .clkr = {
+ .enable_reg = 0xb014,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_qmip_video_vcodec_ahb_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_qspi_cnoc_periph_ahb_clk = {
+ .halt_reg = 0x4b000,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x4b000,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_qspi_cnoc_periph_ahb_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_qspi_core_clk = {
+ .halt_reg = 0x4b004,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x4b004,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_qspi_core_clk",
+ .parent_hws = (const struct clk_hw *[]){
+ &gcc_qspi_core_clk_src.clkr.hw },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_qupv3_wrap0_s0_clk = {
+ .halt_reg = 0x17144,
+ .halt_check = BRANCH_HALT_VOTED,
+ .clkr = {
+ .enable_reg = 0x5200c,
+ .enable_mask = BIT(10),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_qupv3_wrap0_s0_clk",
+ .parent_hws = (const struct clk_hw *[]){
+ &gcc_qupv3_wrap0_s0_clk_src.clkr.hw },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_qupv3_wrap0_s1_clk = {
+ .halt_reg = 0x17274,
+ .halt_check = BRANCH_HALT_VOTED,
+ .clkr = {
+ .enable_reg = 0x5200c,
+ .enable_mask = BIT(11),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_qupv3_wrap0_s1_clk",
+ .parent_hws = (const struct clk_hw *[]){
+ &gcc_qupv3_wrap0_s1_clk_src.clkr.hw },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_qupv3_wrap0_s2_clk = {
+ .halt_reg = 0x173a4,
+ .halt_check = BRANCH_HALT_VOTED,
+ .clkr = {
+ .enable_reg = 0x5200c,
+ .enable_mask = BIT(12),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_qupv3_wrap0_s2_clk",
+ .parent_hws = (const struct clk_hw *[]){
+ &gcc_qupv3_wrap0_s2_clk_src.clkr.hw },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_qupv3_wrap0_s3_clk = {
+ .halt_reg = 0x174d4,
+ .halt_check = BRANCH_HALT_VOTED,
+ .clkr = {
+ .enable_reg = 0x5200c,
+ .enable_mask = BIT(13),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_qupv3_wrap0_s3_clk",
+ .parent_hws = (const struct clk_hw *[]){
+ &gcc_qupv3_wrap0_s3_clk_src.clkr.hw },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_qupv3_wrap0_s4_clk = {
+ .halt_reg = 0x17604,
+ .halt_check = BRANCH_HALT_VOTED,
+ .clkr = {
+ .enable_reg = 0x5200c,
+ .enable_mask = BIT(14),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_qupv3_wrap0_s4_clk",
+ .parent_hws = (const struct clk_hw *[]){
+ &gcc_qupv3_wrap0_s4_clk_src.clkr.hw },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_qupv3_wrap0_s5_clk = {
+ .halt_reg = 0x17734,
+ .halt_check = BRANCH_HALT_VOTED,
+ .clkr = {
+ .enable_reg = 0x5200c,
+ .enable_mask = BIT(15),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_qupv3_wrap0_s5_clk",
+ .parent_hws = (const struct clk_hw *[]){
+ &gcc_qupv3_wrap0_s5_clk_src.clkr.hw },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_qupv3_wrap0_s6_clk = {
+ .halt_reg = 0x17864,
+ .halt_check = BRANCH_HALT_VOTED,
+ .clkr = {
+ .enable_reg = 0x5200c,
+ .enable_mask = BIT(16),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_qupv3_wrap0_s6_clk",
+ .parent_hws = (const struct clk_hw *[]){
+ &gcc_qupv3_wrap0_s6_clk_src.clkr.hw },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_qupv3_wrap0_s7_clk = {
+ .halt_reg = 0x17994,
+ .halt_check = BRANCH_HALT_VOTED,
+ .clkr = {
+ .enable_reg = 0x5200c,
+ .enable_mask = BIT(17),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_qupv3_wrap0_s7_clk",
+ .parent_hws = (const struct clk_hw *[]){
+ &gcc_qupv3_wrap0_s7_clk_src.clkr.hw },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_qupv3_wrap1_s0_clk = {
+ .halt_reg = 0x18144,
+ .halt_check = BRANCH_HALT_VOTED,
+ .clkr = {
+ .enable_reg = 0x5200c,
+ .enable_mask = BIT(22),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_qupv3_wrap1_s0_clk",
+ .parent_hws = (const struct clk_hw *[]){
+ &gcc_qupv3_wrap1_s0_clk_src.clkr.hw },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_qupv3_wrap1_s1_clk = {
+ .halt_reg = 0x18274,
+ .halt_check = BRANCH_HALT_VOTED,
+ .clkr = {
+ .enable_reg = 0x5200c,
+ .enable_mask = BIT(23),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_qupv3_wrap1_s1_clk",
+ .parent_hws = (const struct clk_hw *[]){
+ &gcc_qupv3_wrap1_s1_clk_src.clkr.hw },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_qupv3_wrap1_s2_clk = {
+ .halt_reg = 0x183a4,
+ .halt_check = BRANCH_HALT_VOTED,
+ .clkr = {
+ .enable_reg = 0x5200c,
+ .enable_mask = BIT(24),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_qupv3_wrap1_s2_clk",
+ .parent_hws = (const struct clk_hw *[]){
+ &gcc_qupv3_wrap1_s2_clk_src.clkr.hw },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_qupv3_wrap1_s3_clk = {
+ .halt_reg = 0x184d4,
+ .halt_check = BRANCH_HALT_VOTED,
+ .clkr = {
+ .enable_reg = 0x5200c,
+ .enable_mask = BIT(25),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_qupv3_wrap1_s3_clk",
+ .parent_hws = (const struct clk_hw *[]){
+ &gcc_qupv3_wrap1_s3_clk_src.clkr.hw },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_qupv3_wrap1_s4_clk = {
+ .halt_reg = 0x18604,
+ .halt_check = BRANCH_HALT_VOTED,
+ .clkr = {
+ .enable_reg = 0x5200c,
+ .enable_mask = BIT(26),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_qupv3_wrap1_s4_clk",
+ .parent_hws = (const struct clk_hw *[]){
+ &gcc_qupv3_wrap1_s4_clk_src.clkr.hw },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_qupv3_wrap1_s5_clk = {
+ .halt_reg = 0x18734,
+ .halt_check = BRANCH_HALT_VOTED,
+ .clkr = {
+ .enable_reg = 0x5200c,
+ .enable_mask = BIT(27),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_qupv3_wrap1_s5_clk",
+ .parent_hws = (const struct clk_hw *[]){
+ &gcc_qupv3_wrap1_s5_clk_src.clkr.hw },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_qupv3_wrap2_s0_clk = {
+ .halt_reg = 0x1e144,
+ .halt_check = BRANCH_HALT_VOTED,
+ .clkr = {
+ .enable_reg = 0x52014,
+ .enable_mask = BIT(4),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_qupv3_wrap2_s0_clk",
+ .parent_hws = (const struct clk_hw *[]){
+ &gcc_qupv3_wrap2_s0_clk_src.clkr.hw },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_qupv3_wrap2_s1_clk = {
+ .halt_reg = 0x1e274,
+ .halt_check = BRANCH_HALT_VOTED,
+ .clkr = {
+ .enable_reg = 0x52014,
+ .enable_mask = BIT(5),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_qupv3_wrap2_s1_clk",
+ .parent_hws = (const struct clk_hw *[]){
+ &gcc_qupv3_wrap2_s1_clk_src.clkr.hw },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_qupv3_wrap2_s2_clk = {
+ .halt_reg = 0x1e3a4,
+ .halt_check = BRANCH_HALT_VOTED,
+ .clkr = {
+ .enable_reg = 0x52014,
+ .enable_mask = BIT(6),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_qupv3_wrap2_s2_clk",
+ .parent_hws = (const struct clk_hw *[]){
+ &gcc_qupv3_wrap2_s2_clk_src.clkr.hw },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_qupv3_wrap2_s3_clk = {
+ .halt_reg = 0x1e4d4,
+ .halt_check = BRANCH_HALT_VOTED,
+ .clkr = {
+ .enable_reg = 0x52014,
+ .enable_mask = BIT(7),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_qupv3_wrap2_s3_clk",
+ .parent_hws = (const struct clk_hw *[]){
+ &gcc_qupv3_wrap2_s3_clk_src.clkr.hw },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_qupv3_wrap2_s4_clk = {
+ .halt_reg = 0x1e604,
+ .halt_check = BRANCH_HALT_VOTED,
+ .clkr = {
+ .enable_reg = 0x52014,
+ .enable_mask = BIT(8),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_qupv3_wrap2_s4_clk",
+ .parent_hws = (const struct clk_hw *[]){
+ &gcc_qupv3_wrap2_s4_clk_src.clkr.hw },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_qupv3_wrap2_s5_clk = {
+ .halt_reg = 0x1e734,
+ .halt_check = BRANCH_HALT_VOTED,
+ .clkr = {
+ .enable_reg = 0x52014,
+ .enable_mask = BIT(9),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_qupv3_wrap2_s5_clk",
+ .parent_hws = (const struct clk_hw *[]){
+ &gcc_qupv3_wrap2_s5_clk_src.clkr.hw },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_qupv3_wrap_0_m_ahb_clk = {
+ .halt_reg = 0x17004,
+ .halt_check = BRANCH_HALT_VOTED,
+ .clkr = {
+ .enable_reg = 0x5200c,
+ .enable_mask = BIT(6),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_qupv3_wrap_0_m_ahb_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_qupv3_wrap_0_s_ahb_clk = {
+ .halt_reg = 0x17008,
+ .halt_check = BRANCH_HALT_VOTED,
+ .hwcg_reg = 0x17008,
+ .hwcg_bit = 1,
+ .clkr = {
+ .enable_reg = 0x5200c,
+ .enable_mask = BIT(7),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_qupv3_wrap_0_s_ahb_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_qupv3_wrap_1_m_ahb_clk = {
+ .halt_reg = 0x18004,
+ .halt_check = BRANCH_HALT_VOTED,
+ .clkr = {
+ .enable_reg = 0x5200c,
+ .enable_mask = BIT(20),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_qupv3_wrap_1_m_ahb_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_qupv3_wrap_1_s_ahb_clk = {
+ .halt_reg = 0x18008,
+ .halt_check = BRANCH_HALT_VOTED,
+ .hwcg_reg = 0x18008,
+ .hwcg_bit = 1,
+ .clkr = {
+ .enable_reg = 0x5200c,
+ .enable_mask = BIT(21),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_qupv3_wrap_1_s_ahb_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_qupv3_wrap_2_m_ahb_clk = {
+ .halt_reg = 0x1e004,
+ .halt_check = BRANCH_HALT_VOTED,
+ .clkr = {
+ .enable_reg = 0x52014,
+ .enable_mask = BIT(2),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_qupv3_wrap_2_m_ahb_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_qupv3_wrap_2_s_ahb_clk = {
+ .halt_reg = 0x1e008,
+ .halt_check = BRANCH_HALT_VOTED,
+ .hwcg_reg = 0x1e008,
+ .hwcg_bit = 1,
+ .clkr = {
+ .enable_reg = 0x52014,
+ .enable_mask = BIT(1),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_qupv3_wrap_2_s_ahb_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_sdcc2_ahb_clk = {
+ .halt_reg = 0x14008,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x14008,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_sdcc2_ahb_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_sdcc2_apps_clk = {
+ .halt_reg = 0x14004,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x14004,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_sdcc2_apps_clk",
+ .parent_hws = (const struct clk_hw *[]){
+ &gcc_sdcc2_apps_clk_src.clkr.hw },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_sdcc4_ahb_clk = {
+ .halt_reg = 0x16008,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x16008,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_sdcc4_ahb_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_sdcc4_apps_clk = {
+ .halt_reg = 0x16004,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x16004,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_sdcc4_apps_clk",
+ .parent_hws = (const struct clk_hw *[]){
+ &gcc_sdcc4_apps_clk_src.clkr.hw },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_sys_noc_cpuss_ahb_clk = {
+ .halt_reg = 0x4819c,
+ .halt_check = BRANCH_HALT_VOTED,
+ .clkr = {
+ .enable_reg = 0x52004,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_sys_noc_cpuss_ahb_clk",
+ .parent_hws = (const struct clk_hw *[]){
+ &gcc_cpuss_ahb_clk_src.clkr.hw },
+ .num_parents = 1,
+ /* required for cpuss */
+ .flags = CLK_IS_CRITICAL | CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_tsif_ahb_clk = {
+ .halt_reg = 0x36004,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x36004,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_tsif_ahb_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_tsif_inactivity_timers_clk = {
+ .halt_reg = 0x3600c,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x3600c,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_tsif_inactivity_timers_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_tsif_ref_clk = {
+ .halt_reg = 0x36008,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x36008,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_tsif_ref_clk",
+ .parent_hws = (const struct clk_hw *[]){
+ &gcc_tsif_ref_clk_src.clkr.hw },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_ufs_card_ahb_clk = {
+ .halt_reg = 0x75014,
+ .halt_check = BRANCH_HALT,
+ .hwcg_reg = 0x75014,
+ .hwcg_bit = 1,
+ .clkr = {
+ .enable_reg = 0x75014,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_ufs_card_ahb_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_ufs_card_axi_clk = {
+ .halt_reg = 0x75010,
+ .halt_check = BRANCH_HALT,
+ .hwcg_reg = 0x75010,
+ .hwcg_bit = 1,
+ .clkr = {
+ .enable_reg = 0x75010,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_ufs_card_axi_clk",
+ .parent_hws = (const struct clk_hw *[]){
+ &gcc_ufs_card_axi_clk_src.clkr.hw },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_ufs_card_axi_hw_ctl_clk = {
+ .halt_reg = 0x75010,
+ .halt_check = BRANCH_HALT,
+ .hwcg_reg = 0x75010,
+ .hwcg_bit = 1,
+ .clkr = {
+ .enable_reg = 0x75010,
+ .enable_mask = BIT(1),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_ufs_card_axi_hw_ctl_clk",
+ .parent_hws = (const struct clk_hw *[]){
+ &gcc_ufs_card_axi_clk.clkr.hw },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch_simple_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_ufs_card_clkref_clk = {
+ .halt_reg = 0x8c004,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x8c004,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_ufs_card_clkref_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_ufs_card_ice_core_clk = {
+ .halt_reg = 0x7505c,
+ .halt_check = BRANCH_HALT,
+ .hwcg_reg = 0x7505c,
+ .hwcg_bit = 1,
+ .clkr = {
+ .enable_reg = 0x7505c,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_ufs_card_ice_core_clk",
+ .parent_hws = (const struct clk_hw *[]){
+ &gcc_ufs_card_ice_core_clk_src.clkr.hw },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_ufs_card_ice_core_hw_ctl_clk = {
+ .halt_reg = 0x7505c,
+ .halt_check = BRANCH_HALT,
+ .hwcg_reg = 0x7505c,
+ .hwcg_bit = 1,
+ .clkr = {
+ .enable_reg = 0x7505c,
+ .enable_mask = BIT(1),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_ufs_card_ice_core_hw_ctl_clk",
+ .parent_hws = (const struct clk_hw *[]){
+ &gcc_ufs_card_ice_core_clk.clkr.hw },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch_simple_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_ufs_card_phy_aux_clk = {
+ .halt_reg = 0x75090,
+ .halt_check = BRANCH_HALT,
+ .hwcg_reg = 0x75090,
+ .hwcg_bit = 1,
+ .clkr = {
+ .enable_reg = 0x75090,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_ufs_card_phy_aux_clk",
+ .parent_hws = (const struct clk_hw *[]){
+ &gcc_ufs_card_phy_aux_clk_src.clkr.hw },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_ufs_card_phy_aux_hw_ctl_clk = {
+ .halt_reg = 0x75090,
+ .halt_check = BRANCH_HALT,
+ .hwcg_reg = 0x75090,
+ .hwcg_bit = 1,
+ .clkr = {
+ .enable_reg = 0x75090,
+ .enable_mask = BIT(1),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_ufs_card_phy_aux_hw_ctl_clk",
+ .parent_hws = (const struct clk_hw *[]){
+ &gcc_ufs_card_phy_aux_clk.clkr.hw },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch_simple_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_ufs_card_unipro_core_clk = {
+ .halt_reg = 0x75058,
+ .halt_check = BRANCH_HALT,
+ .hwcg_reg = 0x75058,
+ .hwcg_bit = 1,
+ .clkr = {
+ .enable_reg = 0x75058,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_ufs_card_unipro_core_clk",
+ .parent_hws = (const struct clk_hw *[]){
+ &gcc_ufs_card_unipro_core_clk_src.clkr.hw },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_ufs_card_unipro_core_hw_ctl_clk = {
+ .halt_reg = 0x75058,
+ .halt_check = BRANCH_HALT,
+ .hwcg_reg = 0x75058,
+ .hwcg_bit = 1,
+ .clkr = {
+ .enable_reg = 0x75058,
+ .enable_mask = BIT(1),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_ufs_card_unipro_core_hw_ctl_clk",
+ .parent_hws = (const struct clk_hw *[]){
+ &gcc_ufs_card_unipro_core_clk.clkr.hw },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch_simple_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_ufs_mem_clkref_clk = {
+ .halt_reg = 0x8c000,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x8c000,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_ufs_mem_clkref_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_ufs_phy_ahb_clk = {
+ .halt_reg = 0x77014,
+ .halt_check = BRANCH_HALT,
+ .hwcg_reg = 0x77014,
+ .hwcg_bit = 1,
+ .clkr = {
+ .enable_reg = 0x77014,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_ufs_phy_ahb_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_ufs_phy_axi_clk = {
+ .halt_reg = 0x77010,
+ .halt_check = BRANCH_HALT,
+ .hwcg_reg = 0x77010,
+ .hwcg_bit = 1,
+ .clkr = {
+ .enable_reg = 0x77010,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_ufs_phy_axi_clk",
+ .parent_hws = (const struct clk_hw *[]){
+ &gcc_ufs_phy_axi_clk_src.clkr.hw },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_ufs_phy_axi_hw_ctl_clk = {
+ .halt_reg = 0x77010,
+ .halt_check = BRANCH_HALT,
+ .hwcg_reg = 0x77010,
+ .hwcg_bit = 1,
+ .clkr = {
+ .enable_reg = 0x77010,
+ .enable_mask = BIT(1),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_ufs_phy_axi_hw_ctl_clk",
+ .parent_hws = (const struct clk_hw *[]){
+ &gcc_ufs_phy_axi_clk.clkr.hw },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch_simple_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_ufs_phy_ice_core_clk = {
+ .halt_reg = 0x7705c,
+ .halt_check = BRANCH_HALT,
+ .hwcg_reg = 0x7705c,
+ .hwcg_bit = 1,
+ .clkr = {
+ .enable_reg = 0x7705c,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_ufs_phy_ice_core_clk",
+ .parent_hws = (const struct clk_hw *[]){
+ &gcc_ufs_phy_ice_core_clk_src.clkr.hw },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_ufs_phy_ice_core_hw_ctl_clk = {
+ .halt_reg = 0x7705c,
+ .halt_check = BRANCH_HALT,
+ .hwcg_reg = 0x7705c,
+ .hwcg_bit = 1,
+ .clkr = {
+ .enable_reg = 0x7705c,
+ .enable_mask = BIT(1),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_ufs_phy_ice_core_hw_ctl_clk",
+ .parent_hws = (const struct clk_hw *[]){
+ &gcc_ufs_phy_ice_core_clk.clkr.hw },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch_simple_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_ufs_phy_phy_aux_clk = {
+ .halt_reg = 0x77090,
+ .halt_check = BRANCH_HALT,
+ .hwcg_reg = 0x77090,
+ .hwcg_bit = 1,
+ .clkr = {
+ .enable_reg = 0x77090,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_ufs_phy_phy_aux_clk",
+ .parent_hws = (const struct clk_hw *[]){
+ &gcc_ufs_phy_phy_aux_clk_src.clkr.hw },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_ufs_phy_phy_aux_hw_ctl_clk = {
+ .halt_reg = 0x77090,
+ .halt_check = BRANCH_HALT,
+ .hwcg_reg = 0x77090,
+ .hwcg_bit = 1,
+ .clkr = {
+ .enable_reg = 0x77090,
+ .enable_mask = BIT(1),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_ufs_phy_phy_aux_hw_ctl_clk",
+ .parent_hws = (const struct clk_hw *[]){
+ &gcc_ufs_phy_phy_aux_clk.clkr.hw },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch_simple_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_ufs_phy_unipro_core_clk = {
+ .halt_reg = 0x77058,
+ .halt_check = BRANCH_HALT,
+ .hwcg_reg = 0x77058,
+ .hwcg_bit = 1,
+ .clkr = {
+ .enable_reg = 0x77058,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_ufs_phy_unipro_core_clk",
+ .parent_hws = (const struct clk_hw *[]){
+ &gcc_ufs_phy_unipro_core_clk_src.clkr.hw },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_ufs_phy_unipro_core_hw_ctl_clk = {
+ .halt_reg = 0x77058,
+ .halt_check = BRANCH_HALT,
+ .hwcg_reg = 0x77058,
+ .hwcg_bit = 1,
+ .clkr = {
+ .enable_reg = 0x77058,
+ .enable_mask = BIT(1),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_ufs_phy_unipro_core_hw_ctl_clk",
+ .parent_hws = (const struct clk_hw *[]){
+ &gcc_ufs_phy_unipro_core_clk.clkr.hw },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch_simple_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_usb30_prim_master_clk = {
+ .halt_reg = 0xf010,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0xf010,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_usb30_prim_master_clk",
+ .parent_hws = (const struct clk_hw *[]){
+ &gcc_usb30_prim_master_clk_src.clkr.hw },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_usb30_prim_mock_utmi_clk = {
+ .halt_reg = 0xf018,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0xf018,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_usb30_prim_mock_utmi_clk",
+ .parent_hws = (const struct clk_hw *[]){
+ &gcc_usb30_prim_mock_utmi_clk_src.clkr.hw },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_usb30_prim_sleep_clk = {
+ .halt_reg = 0xf014,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0xf014,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_usb30_prim_sleep_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_usb30_sec_master_clk = {
+ .halt_reg = 0x10010,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x10010,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_usb30_sec_master_clk",
+ .parent_hws = (const struct clk_hw *[]){
+ &gcc_usb30_sec_master_clk_src.clkr.hw },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_usb30_sec_mock_utmi_clk = {
+ .halt_reg = 0x10018,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x10018,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_usb30_sec_mock_utmi_clk",
+ .parent_hws = (const struct clk_hw *[]){
+ &gcc_usb30_sec_mock_utmi_clk_src.clkr.hw },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_usb30_sec_sleep_clk = {
+ .halt_reg = 0x10014,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x10014,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_usb30_sec_sleep_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_usb3_prim_clkref_clk = {
+ .halt_reg = 0x8c008,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x8c008,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_usb3_prim_clkref_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_usb3_prim_phy_aux_clk = {
+ .halt_reg = 0xf050,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0xf050,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_usb3_prim_phy_aux_clk",
+ .parent_hws = (const struct clk_hw *[]){
+ &gcc_usb3_prim_phy_aux_clk_src.clkr.hw },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_usb3_prim_phy_com_aux_clk = {
+ .halt_reg = 0xf054,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0xf054,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_usb3_prim_phy_com_aux_clk",
+ .parent_hws = (const struct clk_hw *[]){
+ &gcc_usb3_prim_phy_aux_clk_src.clkr.hw },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_usb3_sec_clkref_clk = {
+ .halt_reg = 0x8c028,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x8c028,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_usb3_sec_clkref_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_usb3_sec_phy_aux_clk = {
+ .halt_reg = 0x10050,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x10050,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_usb3_sec_phy_aux_clk",
+ .parent_hws = (const struct clk_hw *[]){
+ &gcc_usb3_sec_phy_aux_clk_src.clkr.hw },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_usb3_sec_phy_com_aux_clk = {
+ .halt_reg = 0x10054,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x10054,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_usb3_sec_phy_com_aux_clk",
+ .parent_hws = (const struct clk_hw *[]){
+ &gcc_usb3_sec_phy_aux_clk_src.clkr.hw },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+/*
+ * Clock ON depends on external parent 'config noc', so cant poll
+ * delay and also mark as crtitical for video boot
+ */
+static struct clk_branch gcc_video_ahb_clk = {
+ .halt_reg = 0xb004,
+ .halt_check = BRANCH_HALT_DELAY,
+ .hwcg_reg = 0xb004,
+ .hwcg_bit = 1,
+ .clkr = {
+ .enable_reg = 0xb004,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_video_ahb_clk",
+ .flags = CLK_IS_CRITICAL,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_video_axi0_clk = {
+ .halt_reg = 0xb024,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0xb024,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_video_axi0_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_video_axi1_clk = {
+ .halt_reg = 0xb028,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0xb028,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_video_axi1_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_video_axic_clk = {
+ .halt_reg = 0xb02c,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0xb02c,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_video_axic_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+/* XO critical input to video, so no need to poll */
+static struct clk_branch gcc_video_xo_clk = {
+ .halt_reg = 0xb040,
+ .halt_check = BRANCH_HALT_DELAY,
+ .clkr = {
+ .enable_reg = 0xb040,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_video_xo_clk",
+ .flags = CLK_IS_CRITICAL,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_regmap *gcc_sm8150_clocks[] = {
+ [GCC_AGGRE_NOC_PCIE_TBU_CLK] = &gcc_aggre_noc_pcie_tbu_clk.clkr,
+ [GCC_AGGRE_UFS_CARD_AXI_CLK] = &gcc_aggre_ufs_card_axi_clk.clkr,
+ [GCC_AGGRE_UFS_CARD_AXI_HW_CTL_CLK] =
+ &gcc_aggre_ufs_card_axi_hw_ctl_clk.clkr,
+ [GCC_AGGRE_UFS_PHY_AXI_CLK] = &gcc_aggre_ufs_phy_axi_clk.clkr,
+ [GCC_AGGRE_UFS_PHY_AXI_HW_CTL_CLK] =
+ &gcc_aggre_ufs_phy_axi_hw_ctl_clk.clkr,
+ [GCC_AGGRE_USB3_PRIM_AXI_CLK] = &gcc_aggre_usb3_prim_axi_clk.clkr,
+ [GCC_AGGRE_USB3_SEC_AXI_CLK] = &gcc_aggre_usb3_sec_axi_clk.clkr,
+ [GCC_BOOT_ROM_AHB_CLK] = &gcc_boot_rom_ahb_clk.clkr,
+ [GCC_CAMERA_AHB_CLK] = &gcc_camera_ahb_clk.clkr,
+ [GCC_CAMERA_HF_AXI_CLK] = &gcc_camera_hf_axi_clk.clkr,
+ [GCC_CAMERA_SF_AXI_CLK] = &gcc_camera_sf_axi_clk.clkr,
+ [GCC_CAMERA_XO_CLK] = &gcc_camera_xo_clk.clkr,
+ [GCC_CFG_NOC_USB3_PRIM_AXI_CLK] = &gcc_cfg_noc_usb3_prim_axi_clk.clkr,
+ [GCC_CFG_NOC_USB3_SEC_AXI_CLK] = &gcc_cfg_noc_usb3_sec_axi_clk.clkr,
+ [GCC_CPUSS_AHB_CLK] = &gcc_cpuss_ahb_clk.clkr,
+ [GCC_CPUSS_AHB_CLK_SRC] = &gcc_cpuss_ahb_clk_src.clkr,
+ [GCC_CPUSS_DVM_BUS_CLK] = &gcc_cpuss_dvm_bus_clk.clkr,
+ [GCC_CPUSS_GNOC_CLK] = &gcc_cpuss_gnoc_clk.clkr,
+ [GCC_CPUSS_RBCPR_CLK] = &gcc_cpuss_rbcpr_clk.clkr,
+ [GCC_DDRSS_GPU_AXI_CLK] = &gcc_ddrss_gpu_axi_clk.clkr,
+ [GCC_DISP_AHB_CLK] = &gcc_disp_ahb_clk.clkr,
+ [GCC_DISP_HF_AXI_CLK] = &gcc_disp_hf_axi_clk.clkr,
+ [GCC_DISP_SF_AXI_CLK] = &gcc_disp_sf_axi_clk.clkr,
+ [GCC_DISP_XO_CLK] = &gcc_disp_xo_clk.clkr,
+ [GCC_EMAC_AXI_CLK] = &gcc_emac_axi_clk.clkr,
+ [GCC_EMAC_PTP_CLK] = &gcc_emac_ptp_clk.clkr,
+ [GCC_EMAC_PTP_CLK_SRC] = &gcc_emac_ptp_clk_src.clkr,
+ [GCC_EMAC_RGMII_CLK] = &gcc_emac_rgmii_clk.clkr,
+ [GCC_EMAC_RGMII_CLK_SRC] = &gcc_emac_rgmii_clk_src.clkr,
+ [GCC_EMAC_SLV_AHB_CLK] = &gcc_emac_slv_ahb_clk.clkr,
+ [GCC_GP1_CLK] = &gcc_gp1_clk.clkr,
+ [GCC_GP1_CLK_SRC] = &gcc_gp1_clk_src.clkr,
+ [GCC_GP2_CLK] = &gcc_gp2_clk.clkr,
+ [GCC_GP2_CLK_SRC] = &gcc_gp2_clk_src.clkr,
+ [GCC_GP3_CLK] = &gcc_gp3_clk.clkr,
+ [GCC_GP3_CLK_SRC] = &gcc_gp3_clk_src.clkr,
+ [GCC_GPU_CFG_AHB_CLK] = &gcc_gpu_cfg_ahb_clk.clkr,
+ [GCC_GPU_IREF_CLK] = &gcc_gpu_iref_clk.clkr,
+ [GCC_GPU_MEMNOC_GFX_CLK] = &gcc_gpu_memnoc_gfx_clk.clkr,
+ [GCC_GPU_SNOC_DVM_GFX_CLK] = &gcc_gpu_snoc_dvm_gfx_clk.clkr,
+ [GCC_NPU_AT_CLK] = &gcc_npu_at_clk.clkr,
+ [GCC_NPU_AXI_CLK] = &gcc_npu_axi_clk.clkr,
+ [GCC_NPU_CFG_AHB_CLK] = &gcc_npu_cfg_ahb_clk.clkr,
+ [GCC_NPU_TRIG_CLK] = &gcc_npu_trig_clk.clkr,
+ [GCC_PCIE0_PHY_REFGEN_CLK] = &gcc_pcie0_phy_refgen_clk.clkr,
+ [GCC_PCIE1_PHY_REFGEN_CLK] = &gcc_pcie1_phy_refgen_clk.clkr,
+ [GCC_PCIE_0_AUX_CLK] = &gcc_pcie_0_aux_clk.clkr,
+ [GCC_PCIE_0_AUX_CLK_SRC] = &gcc_pcie_0_aux_clk_src.clkr,
+ [GCC_PCIE_0_CFG_AHB_CLK] = &gcc_pcie_0_cfg_ahb_clk.clkr,
+ [GCC_PCIE_0_CLKREF_CLK] = &gcc_pcie_0_clkref_clk.clkr,
+ [GCC_PCIE_0_MSTR_AXI_CLK] = &gcc_pcie_0_mstr_axi_clk.clkr,
+ [GCC_PCIE_0_PIPE_CLK] = &gcc_pcie_0_pipe_clk.clkr,
+ [GCC_PCIE_0_SLV_AXI_CLK] = &gcc_pcie_0_slv_axi_clk.clkr,
+ [GCC_PCIE_0_SLV_Q2A_AXI_CLK] = &gcc_pcie_0_slv_q2a_axi_clk.clkr,
+ [GCC_PCIE_1_AUX_CLK] = &gcc_pcie_1_aux_clk.clkr,
+ [GCC_PCIE_1_AUX_CLK_SRC] = &gcc_pcie_1_aux_clk_src.clkr,
+ [GCC_PCIE_1_CFG_AHB_CLK] = &gcc_pcie_1_cfg_ahb_clk.clkr,
+ [GCC_PCIE_1_CLKREF_CLK] = &gcc_pcie_1_clkref_clk.clkr,
+ [GCC_PCIE_1_MSTR_AXI_CLK] = &gcc_pcie_1_mstr_axi_clk.clkr,
+ [GCC_PCIE_1_PIPE_CLK] = &gcc_pcie_1_pipe_clk.clkr,
+ [GCC_PCIE_1_SLV_AXI_CLK] = &gcc_pcie_1_slv_axi_clk.clkr,
+ [GCC_PCIE_1_SLV_Q2A_AXI_CLK] = &gcc_pcie_1_slv_q2a_axi_clk.clkr,
+ [GCC_PCIE_PHY_AUX_CLK] = &gcc_pcie_phy_aux_clk.clkr,
+ [GCC_PCIE_PHY_REFGEN_CLK_SRC] = &gcc_pcie_phy_refgen_clk_src.clkr,
+ [GCC_PDM2_CLK] = &gcc_pdm2_clk.clkr,
+ [GCC_PDM2_CLK_SRC] = &gcc_pdm2_clk_src.clkr,
+ [GCC_PDM_AHB_CLK] = &gcc_pdm_ahb_clk.clkr,
+ [GCC_PDM_XO4_CLK] = &gcc_pdm_xo4_clk.clkr,
+ [GCC_PRNG_AHB_CLK] = &gcc_prng_ahb_clk.clkr,
+ [GCC_QMIP_CAMERA_NRT_AHB_CLK] = &gcc_qmip_camera_nrt_ahb_clk.clkr,
+ [GCC_QMIP_CAMERA_RT_AHB_CLK] = &gcc_qmip_camera_rt_ahb_clk.clkr,
+ [GCC_QMIP_DISP_AHB_CLK] = &gcc_qmip_disp_ahb_clk.clkr,
+ [GCC_QMIP_VIDEO_CVP_AHB_CLK] = &gcc_qmip_video_cvp_ahb_clk.clkr,
+ [GCC_QMIP_VIDEO_VCODEC_AHB_CLK] = &gcc_qmip_video_vcodec_ahb_clk.clkr,
+ [GCC_QSPI_CNOC_PERIPH_AHB_CLK] = &gcc_qspi_cnoc_periph_ahb_clk.clkr,
+ [GCC_QSPI_CORE_CLK] = &gcc_qspi_core_clk.clkr,
+ [GCC_QSPI_CORE_CLK_SRC] = &gcc_qspi_core_clk_src.clkr,
+ [GCC_QUPV3_WRAP0_S0_CLK] = &gcc_qupv3_wrap0_s0_clk.clkr,
+ [GCC_QUPV3_WRAP0_S0_CLK_SRC] = &gcc_qupv3_wrap0_s0_clk_src.clkr,
+ [GCC_QUPV3_WRAP0_S1_CLK] = &gcc_qupv3_wrap0_s1_clk.clkr,
+ [GCC_QUPV3_WRAP0_S1_CLK_SRC] = &gcc_qupv3_wrap0_s1_clk_src.clkr,
+ [GCC_QUPV3_WRAP0_S2_CLK] = &gcc_qupv3_wrap0_s2_clk.clkr,
+ [GCC_QUPV3_WRAP0_S2_CLK_SRC] = &gcc_qupv3_wrap0_s2_clk_src.clkr,
+ [GCC_QUPV3_WRAP0_S3_CLK] = &gcc_qupv3_wrap0_s3_clk.clkr,
+ [GCC_QUPV3_WRAP0_S3_CLK_SRC] = &gcc_qupv3_wrap0_s3_clk_src.clkr,
+ [GCC_QUPV3_WRAP0_S4_CLK] = &gcc_qupv3_wrap0_s4_clk.clkr,
+ [GCC_QUPV3_WRAP0_S4_CLK_SRC] = &gcc_qupv3_wrap0_s4_clk_src.clkr,
+ [GCC_QUPV3_WRAP0_S5_CLK] = &gcc_qupv3_wrap0_s5_clk.clkr,
+ [GCC_QUPV3_WRAP0_S5_CLK_SRC] = &gcc_qupv3_wrap0_s5_clk_src.clkr,
+ [GCC_QUPV3_WRAP0_S6_CLK] = &gcc_qupv3_wrap0_s6_clk.clkr,
+ [GCC_QUPV3_WRAP0_S6_CLK_SRC] = &gcc_qupv3_wrap0_s6_clk_src.clkr,
+ [GCC_QUPV3_WRAP0_S7_CLK] = &gcc_qupv3_wrap0_s7_clk.clkr,
+ [GCC_QUPV3_WRAP0_S7_CLK_SRC] = &gcc_qupv3_wrap0_s7_clk_src.clkr,
+ [GCC_QUPV3_WRAP1_S0_CLK] = &gcc_qupv3_wrap1_s0_clk.clkr,
+ [GCC_QUPV3_WRAP1_S0_CLK_SRC] = &gcc_qupv3_wrap1_s0_clk_src.clkr,
+ [GCC_QUPV3_WRAP1_S1_CLK] = &gcc_qupv3_wrap1_s1_clk.clkr,
+ [GCC_QUPV3_WRAP1_S1_CLK_SRC] = &gcc_qupv3_wrap1_s1_clk_src.clkr,
+ [GCC_QUPV3_WRAP1_S2_CLK] = &gcc_qupv3_wrap1_s2_clk.clkr,
+ [GCC_QUPV3_WRAP1_S2_CLK_SRC] = &gcc_qupv3_wrap1_s2_clk_src.clkr,
+ [GCC_QUPV3_WRAP1_S3_CLK] = &gcc_qupv3_wrap1_s3_clk.clkr,
+ [GCC_QUPV3_WRAP1_S3_CLK_SRC] = &gcc_qupv3_wrap1_s3_clk_src.clkr,
+ [GCC_QUPV3_WRAP1_S4_CLK] = &gcc_qupv3_wrap1_s4_clk.clkr,
+ [GCC_QUPV3_WRAP1_S4_CLK_SRC] = &gcc_qupv3_wrap1_s4_clk_src.clkr,
+ [GCC_QUPV3_WRAP1_S5_CLK] = &gcc_qupv3_wrap1_s5_clk.clkr,
+ [GCC_QUPV3_WRAP1_S5_CLK_SRC] = &gcc_qupv3_wrap1_s5_clk_src.clkr,
+ [GCC_QUPV3_WRAP2_S0_CLK] = &gcc_qupv3_wrap2_s0_clk.clkr,
+ [GCC_QUPV3_WRAP2_S0_CLK_SRC] = &gcc_qupv3_wrap2_s0_clk_src.clkr,
+ [GCC_QUPV3_WRAP2_S1_CLK] = &gcc_qupv3_wrap2_s1_clk.clkr,
+ [GCC_QUPV3_WRAP2_S1_CLK_SRC] = &gcc_qupv3_wrap2_s1_clk_src.clkr,
+ [GCC_QUPV3_WRAP2_S2_CLK] = &gcc_qupv3_wrap2_s2_clk.clkr,
+ [GCC_QUPV3_WRAP2_S2_CLK_SRC] = &gcc_qupv3_wrap2_s2_clk_src.clkr,
+ [GCC_QUPV3_WRAP2_S3_CLK] = &gcc_qupv3_wrap2_s3_clk.clkr,
+ [GCC_QUPV3_WRAP2_S3_CLK_SRC] = &gcc_qupv3_wrap2_s3_clk_src.clkr,
+ [GCC_QUPV3_WRAP2_S4_CLK] = &gcc_qupv3_wrap2_s4_clk.clkr,
+ [GCC_QUPV3_WRAP2_S4_CLK_SRC] = &gcc_qupv3_wrap2_s4_clk_src.clkr,
+ [GCC_QUPV3_WRAP2_S5_CLK] = &gcc_qupv3_wrap2_s5_clk.clkr,
+ [GCC_QUPV3_WRAP2_S5_CLK_SRC] = &gcc_qupv3_wrap2_s5_clk_src.clkr,
+ [GCC_QUPV3_WRAP_0_M_AHB_CLK] = &gcc_qupv3_wrap_0_m_ahb_clk.clkr,
+ [GCC_QUPV3_WRAP_0_S_AHB_CLK] = &gcc_qupv3_wrap_0_s_ahb_clk.clkr,
+ [GCC_QUPV3_WRAP_1_M_AHB_CLK] = &gcc_qupv3_wrap_1_m_ahb_clk.clkr,
+ [GCC_QUPV3_WRAP_1_S_AHB_CLK] = &gcc_qupv3_wrap_1_s_ahb_clk.clkr,
+ [GCC_QUPV3_WRAP_2_M_AHB_CLK] = &gcc_qupv3_wrap_2_m_ahb_clk.clkr,
+ [GCC_QUPV3_WRAP_2_S_AHB_CLK] = &gcc_qupv3_wrap_2_s_ahb_clk.clkr,
+ [GCC_SDCC2_AHB_CLK] = &gcc_sdcc2_ahb_clk.clkr,
+ [GCC_SDCC2_APPS_CLK] = &gcc_sdcc2_apps_clk.clkr,
+ [GCC_SDCC2_APPS_CLK_SRC] = &gcc_sdcc2_apps_clk_src.clkr,
+ [GCC_SDCC4_AHB_CLK] = &gcc_sdcc4_ahb_clk.clkr,
+ [GCC_SDCC4_APPS_CLK] = &gcc_sdcc4_apps_clk.clkr,
+ [GCC_SDCC4_APPS_CLK_SRC] = &gcc_sdcc4_apps_clk_src.clkr,
+ [GCC_SYS_NOC_CPUSS_AHB_CLK] = &gcc_sys_noc_cpuss_ahb_clk.clkr,
+ [GCC_TSIF_AHB_CLK] = &gcc_tsif_ahb_clk.clkr,
+ [GCC_TSIF_INACTIVITY_TIMERS_CLK] = &gcc_tsif_inactivity_timers_clk.clkr,
+ [GCC_TSIF_REF_CLK] = &gcc_tsif_ref_clk.clkr,
+ [GCC_TSIF_REF_CLK_SRC] = &gcc_tsif_ref_clk_src.clkr,
+ [GCC_UFS_CARD_AHB_CLK] = &gcc_ufs_card_ahb_clk.clkr,
+ [GCC_UFS_CARD_AXI_CLK] = &gcc_ufs_card_axi_clk.clkr,
+ [GCC_UFS_CARD_AXI_CLK_SRC] = &gcc_ufs_card_axi_clk_src.clkr,
+ [GCC_UFS_CARD_AXI_HW_CTL_CLK] = &gcc_ufs_card_axi_hw_ctl_clk.clkr,
+ [GCC_UFS_CARD_CLKREF_CLK] = &gcc_ufs_card_clkref_clk.clkr,
+ [GCC_UFS_CARD_ICE_CORE_CLK] = &gcc_ufs_card_ice_core_clk.clkr,
+ [GCC_UFS_CARD_ICE_CORE_CLK_SRC] = &gcc_ufs_card_ice_core_clk_src.clkr,
+ [GCC_UFS_CARD_ICE_CORE_HW_CTL_CLK] =
+ &gcc_ufs_card_ice_core_hw_ctl_clk.clkr,
+ [GCC_UFS_CARD_PHY_AUX_CLK] = &gcc_ufs_card_phy_aux_clk.clkr,
+ [GCC_UFS_CARD_PHY_AUX_CLK_SRC] = &gcc_ufs_card_phy_aux_clk_src.clkr,
+ [GCC_UFS_CARD_PHY_AUX_HW_CTL_CLK] =
+ &gcc_ufs_card_phy_aux_hw_ctl_clk.clkr,
+ [GCC_UFS_CARD_UNIPRO_CORE_CLK] = &gcc_ufs_card_unipro_core_clk.clkr,
+ [GCC_UFS_CARD_UNIPRO_CORE_CLK_SRC] =
+ &gcc_ufs_card_unipro_core_clk_src.clkr,
+ [GCC_UFS_CARD_UNIPRO_CORE_HW_CTL_CLK] =
+ &gcc_ufs_card_unipro_core_hw_ctl_clk.clkr,
+ [GCC_UFS_MEM_CLKREF_CLK] = &gcc_ufs_mem_clkref_clk.clkr,
+ [GCC_UFS_PHY_AHB_CLK] = &gcc_ufs_phy_ahb_clk.clkr,
+ [GCC_UFS_PHY_AXI_CLK] = &gcc_ufs_phy_axi_clk.clkr,
+ [GCC_UFS_PHY_AXI_CLK_SRC] = &gcc_ufs_phy_axi_clk_src.clkr,
+ [GCC_UFS_PHY_AXI_HW_CTL_CLK] = &gcc_ufs_phy_axi_hw_ctl_clk.clkr,
+ [GCC_UFS_PHY_ICE_CORE_CLK] = &gcc_ufs_phy_ice_core_clk.clkr,
+ [GCC_UFS_PHY_ICE_CORE_CLK_SRC] = &gcc_ufs_phy_ice_core_clk_src.clkr,
+ [GCC_UFS_PHY_ICE_CORE_HW_CTL_CLK] =
+ &gcc_ufs_phy_ice_core_hw_ctl_clk.clkr,
+ [GCC_UFS_PHY_PHY_AUX_CLK] = &gcc_ufs_phy_phy_aux_clk.clkr,
+ [GCC_UFS_PHY_PHY_AUX_CLK_SRC] = &gcc_ufs_phy_phy_aux_clk_src.clkr,
+ [GCC_UFS_PHY_PHY_AUX_HW_CTL_CLK] = &gcc_ufs_phy_phy_aux_hw_ctl_clk.clkr,
+ [GCC_UFS_PHY_UNIPRO_CORE_CLK] = &gcc_ufs_phy_unipro_core_clk.clkr,
+ [GCC_UFS_PHY_UNIPRO_CORE_CLK_SRC] =
+ &gcc_ufs_phy_unipro_core_clk_src.clkr,
+ [GCC_UFS_PHY_UNIPRO_CORE_HW_CTL_CLK] =
+ &gcc_ufs_phy_unipro_core_hw_ctl_clk.clkr,
+ [GCC_USB30_PRIM_MASTER_CLK] = &gcc_usb30_prim_master_clk.clkr,
+ [GCC_USB30_PRIM_MASTER_CLK_SRC] = &gcc_usb30_prim_master_clk_src.clkr,
+ [GCC_USB30_PRIM_MOCK_UTMI_CLK] = &gcc_usb30_prim_mock_utmi_clk.clkr,
+ [GCC_USB30_PRIM_MOCK_UTMI_CLK_SRC] =
+ &gcc_usb30_prim_mock_utmi_clk_src.clkr,
+ [GCC_USB30_PRIM_SLEEP_CLK] = &gcc_usb30_prim_sleep_clk.clkr,
+ [GCC_USB30_SEC_MASTER_CLK] = &gcc_usb30_sec_master_clk.clkr,
+ [GCC_USB30_SEC_MASTER_CLK_SRC] = &gcc_usb30_sec_master_clk_src.clkr,
+ [GCC_USB30_SEC_MOCK_UTMI_CLK] = &gcc_usb30_sec_mock_utmi_clk.clkr,
+ [GCC_USB30_SEC_MOCK_UTMI_CLK_SRC] =
+ &gcc_usb30_sec_mock_utmi_clk_src.clkr,
+ [GCC_USB30_SEC_SLEEP_CLK] = &gcc_usb30_sec_sleep_clk.clkr,
+ [GCC_USB3_PRIM_CLKREF_CLK] = &gcc_usb3_prim_clkref_clk.clkr,
+ [GCC_USB3_PRIM_PHY_AUX_CLK] = &gcc_usb3_prim_phy_aux_clk.clkr,
+ [GCC_USB3_PRIM_PHY_AUX_CLK_SRC] = &gcc_usb3_prim_phy_aux_clk_src.clkr,
+ [GCC_USB3_PRIM_PHY_COM_AUX_CLK] = &gcc_usb3_prim_phy_com_aux_clk.clkr,
+ [GCC_USB3_SEC_CLKREF_CLK] = &gcc_usb3_sec_clkref_clk.clkr,
+ [GCC_USB3_SEC_PHY_AUX_CLK] = &gcc_usb3_sec_phy_aux_clk.clkr,
+ [GCC_USB3_SEC_PHY_AUX_CLK_SRC] = &gcc_usb3_sec_phy_aux_clk_src.clkr,
+ [GCC_USB3_SEC_PHY_COM_AUX_CLK] = &gcc_usb3_sec_phy_com_aux_clk.clkr,
+ [GCC_VIDEO_AHB_CLK] = &gcc_video_ahb_clk.clkr,
+ [GCC_VIDEO_AXI0_CLK] = &gcc_video_axi0_clk.clkr,
+ [GCC_VIDEO_AXI1_CLK] = &gcc_video_axi1_clk.clkr,
+ [GCC_VIDEO_AXIC_CLK] = &gcc_video_axic_clk.clkr,
+ [GCC_VIDEO_XO_CLK] = &gcc_video_xo_clk.clkr,
+ [GPLL0] = &gpll0.clkr,
+ [GPLL0_OUT_EVEN] = &gpll0_out_even.clkr,
+ [GPLL7] = &gpll7.clkr,
+ [GPLL9] = &gpll9.clkr,
+};
+
+static const struct qcom_reset_map gcc_sm8150_resets[] = {
+ [GCC_EMAC_BCR] = { 0x6000 },
+ [GCC_GPU_BCR] = { 0x71000 },
+ [GCC_MMSS_BCR] = { 0xb000 },
+ [GCC_NPU_BCR] = { 0x4d000 },
+ [GCC_PCIE_0_BCR] = { 0x6b000 },
+ [GCC_PCIE_0_PHY_BCR] = { 0x6c01c },
+ [GCC_PCIE_1_BCR] = { 0x8d000 },
+ [GCC_PCIE_1_PHY_BCR] = { 0x8e01c },
+ [GCC_PCIE_PHY_BCR] = { 0x6f000 },
+ [GCC_PDM_BCR] = { 0x33000 },
+ [GCC_PRNG_BCR] = { 0x34000 },
+ [GCC_QSPI_BCR] = { 0x24008 },
+ [GCC_QUPV3_WRAPPER_0_BCR] = { 0x17000 },
+ [GCC_QUPV3_WRAPPER_1_BCR] = { 0x18000 },
+ [GCC_QUPV3_WRAPPER_2_BCR] = { 0x1e000 },
+ [GCC_QUSB2PHY_PRIM_BCR] = { 0x12000 },
+ [GCC_QUSB2PHY_SEC_BCR] = { 0x12004 },
+ [GCC_USB3_PHY_PRIM_BCR] = { 0x50000 },
+ [GCC_USB3_DP_PHY_PRIM_BCR] = { 0x50008 },
+ [GCC_USB3_PHY_SEC_BCR] = { 0x5000c },
+ [GCC_USB3PHY_PHY_SEC_BCR] = { 0x50010 },
+ [GCC_SDCC2_BCR] = { 0x14000 },
+ [GCC_SDCC4_BCR] = { 0x16000 },
+ [GCC_TSIF_BCR] = { 0x36000 },
+ [GCC_UFS_CARD_BCR] = { 0x75000 },
+ [GCC_UFS_PHY_BCR] = { 0x77000 },
+ [GCC_USB30_PRIM_BCR] = { 0xf000 },
+ [GCC_USB30_SEC_BCR] = { 0x10000 },
+ [GCC_USB_PHY_CFG_AHB2PHY_BCR] = { 0x6a000 },
+};
+
+static const struct regmap_config gcc_sm8150_regmap_config = {
+ .reg_bits = 32,
+ .reg_stride = 4,
+ .val_bits = 32,
+ .max_register = 0x9c040,
+ .fast_io = true,
+};
+
+static const struct qcom_cc_desc gcc_sm8150_desc = {
+ .config = &gcc_sm8150_regmap_config,
+ .clks = gcc_sm8150_clocks,
+ .num_clks = ARRAY_SIZE(gcc_sm8150_clocks),
+ .resets = gcc_sm8150_resets,
+ .num_resets = ARRAY_SIZE(gcc_sm8150_resets),
+};
+
+static const struct of_device_id gcc_sm8150_match_table[] = {
+ { .compatible = "qcom,gcc-sm8150" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, gcc_sm8150_match_table);
+
+static int gcc_sm8150_probe(struct platform_device *pdev)
+{
+ struct regmap *regmap;
+
+ regmap = qcom_cc_map(pdev, &gcc_sm8150_desc);
+ if (IS_ERR(regmap))
+ return PTR_ERR(regmap);
+
+ /* Disable the GPLL0 active input to NPU and GPU via MISC registers */
+ regmap_update_bits(regmap, 0x4d110, 0x3, 0x3);
+ regmap_update_bits(regmap, 0x71028, 0x3, 0x3);
+
+ return qcom_cc_really_probe(pdev, &gcc_sm8150_desc, regmap);
+}
+
+static struct platform_driver gcc_sm8150_driver = {
+ .probe = gcc_sm8150_probe,
+ .driver = {
+ .name = "gcc-sm8150",
+ .of_match_table = gcc_sm8150_match_table,
+ },
+};
+
+static int __init gcc_sm8150_init(void)
+{
+ return platform_driver_register(&gcc_sm8150_driver);
+}
+subsys_initcall(gcc_sm8150_init);
+
+static void __exit gcc_sm8150_exit(void)
+{
+ platform_driver_unregister(&gcc_sm8150_driver);
+}
+module_exit(gcc_sm8150_exit);
+
+MODULE_DESCRIPTION("QTI GCC SM8150 Driver");
+MODULE_LICENSE("GPL v2");
--
2.20.1
^ permalink raw reply related
* Re: [PATCH 1/3] Revert "usb: usb251xb: Add US lanes inversion dts-bindings"
From: Marco Felsch @ 2019-07-22 7:46 UTC (permalink / raw)
To: Serge Semin
Cc: Lucas Stach, Mark Rutland, devicetree, Greg Kroah-Hartman,
linux-usb, patchwork-lst, Rob Herring, kernel, Richard Leitner
In-Reply-To: <20190719101337.36omwmqc4lbtw6do@mobilestation>
Hi Serge,
On 19-07-19 13:13, Serge Semin wrote:
> Hello Lucas
>
> On Fri, Jul 19, 2019 at 10:44:05AM +0200, Lucas Stach wrote:
> > This reverts commit 3342ce35a1, as there is no need for this separate
> > property and it breaks compatibility with existing devicetree files
> > (arch/arm64/boot/dts/freescale/imx8mq.dtsi).
> >
>
> Hmm, didn't know there had been anything staged to merge and touching this
> property before submitting the update. We must have done it nearly at the same
> time, or your patch hasn't been merged at the time I prepared mine.
>
> Anyway why would you prefer to change the interface again instead of
> following the existing way? Firstly It is much easier to fix the dts-file
> than to revert the interface back and break dts-files of possible other users.
Since the dtbs are firmware thats not possible everytime. You can't even
say that nobody uses that binding because it's not grepable within the
kernel repo. Most vendors do not publish their dts files but use the
bindings and rely on stable bindings.
> Secondly the chip documentation doesn't have anything regarding port 0.
Thats not true. I've checked the usb2517 documentation and PRTSP register
description. Bit-0 points to the upstream port and the dt-binding
is such generic to cover that too. By swap-dx-lanes I mean swap d+/d-
lanes else it would be something like swap-downstream-lanes. Since the
upstream port have d+/d- lanes too it would be covered too.
> It states to swap the Ports from 1 to 4 (usb2514) corresponding to the bits
> 1 - 4 of the 'PORT SWAP' register, while bit 0 is connected with explicitly
> named Upstream Port (without any numbering). Thirdly having a separate
> property for US port makes the driver bindings interface a bit better
> readable/logical, since in current implementation there is no implicit/unspoken/hidden
> rule that port 0 corresponds to the Upstream Port, Port 0 just doesn't exists
> (following the chip datasheet text), and the other port-related properties are
> only applicable for downstream ports. So the driver code rejects them being
So the correct fix should be extending the documentation rather than
introducing a new binding?
> utilized for a port with 0 identifier. The only port-related setting being
> exposed by the interface is the swap-port-one and it has a separately bound
> property 'swap-us-lanes' for the Upstream port.
>
> As for me, all of this makes more sense than having an implicit Port 0 - Upstream
> port binding (as you suggest). Although the final decision of which solution is
> better is after the subsystem maintainer after all.
That's true but he had to cover the dt-backward compatibility.
Regards,
Marco
> Regards,
> -Sergey
>
> > CC: stable@vger.kernel.org #5.2
> > Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
> > ---
> > Documentation/devicetree/bindings/usb/usb251xb.txt | 6 ++----
> > 1 file changed, 2 insertions(+), 4 deletions(-)
> >
> > diff --git a/Documentation/devicetree/bindings/usb/usb251xb.txt b/Documentation/devicetree/bindings/usb/usb251xb.txt
> > index bc7945e9dbfe..17915f64b8ee 100644
> > --- a/Documentation/devicetree/bindings/usb/usb251xb.txt
> > +++ b/Documentation/devicetree/bindings/usb/usb251xb.txt
> > @@ -64,10 +64,8 @@ Optional properties :
> > - power-on-time-ms : Specifies the time it takes from the time the host
> > initiates the power-on sequence to a port until the port has adequate
> > power. The value is given in ms in a 0 - 510 range (default is 100ms).
> > - - swap-dx-lanes : Specifies the downstream ports which will swap the
> > - differential-pair (D+/D-), default is not-swapped.
> > - - swap-us-lanes : Selects the upstream port differential-pair (D+/D-)
> > - swapping (boolean, default is not-swapped)
> > + - swap-dx-lanes : Specifies the ports which will swap the differential-pair
> > + (D+/D-), default is not-swapped.
> >
> > Examples:
> > usb2512b@2c {
> > --
> > 2.20.1
> >
>
>
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
^ permalink raw reply
* Re: [PATCH v2] arm: dts: imx6qdl: add gpio expander pca9535
From: Marco Felsch @ 2019-07-22 7:53 UTC (permalink / raw)
To: Gilles DOFFE
Cc: devicetree, linux-arm-kernel, linux-kernel, mark.rutland,
festevam, s.hauer, rennes, robh+dt, linux-imx, kernel,
jerome.oufella, shawnguo
In-Reply-To: <20190719104615.5329-1-gilles.doffe@savoirfairelinux.com>
Hi Gilles,
can you adapt the patch title, I assumed that the base dtsi is adding a
gpio-expander which makes no sense.
On 19-07-19 12:46, Gilles DOFFE wrote:
> The pca9535 gpio expander is present on the Rex baseboard, but missing
> from the dtsi.
>
> Add the new gpio controller and the associated interrupt line
> MX6QDL_PAD_NANDF_CS3__GPIO6_IO16.
>
> Signed-off-by: Gilles DOFFE <gilles.doffe@savoirfairelinux.com>
> ---
Having a changelog would be nice too.
> arch/arm/boot/dts/imx6qdl-rex.dtsi | 19 +++++++++++++++++++
> 1 file changed, 19 insertions(+)
>
> diff --git a/arch/arm/boot/dts/imx6qdl-rex.dtsi b/arch/arm/boot/dts/imx6qdl-rex.dtsi
> index 97f1659144ea..b517efb22fcb 100644
> --- a/arch/arm/boot/dts/imx6qdl-rex.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-rex.dtsi
> @@ -136,6 +136,19 @@
> compatible = "atmel,24c02";
> reg = <0x57>;
> };
> +
> + pca9535: gpio8@27 {
> + compatible = "nxp,pca9535";
> + reg = <0x27>;
The i2c devices are orderd by their i2c-addresses starting from the
lowest.
> + gpio-controller;
> + #gpio-cells = <2>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_pca9535>;
> + interrupt-parent = <&gpio6>;
> + interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> };
>
> &i2c3 {
> @@ -237,6 +250,12 @@
> >;
> };
>
> + pinctrl_pca9535: pca9535 {
> + fsl,pins = <
> + MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x00017059
The pinmux below don't use the leading zero's if you are the first I
would drop that.
Regards,
Marco
> + >;
> + };
> +
> pinctrl_uart1: uart1grp {
> fsl,pins = <
> MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
> --
> 2.19.1
>
>
>
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
^ permalink raw reply
* Re: [PATCH] riscv: dts: fu540-c000: Add "status" property to cpu node
From: Bin Meng @ 2019-07-22 8:02 UTC (permalink / raw)
To: Anup Patel
Cc: Mark Rutland, devicetree, Albert Ou, Palmer Dabbelt, Yash Shah,
Rob Herring, Paul Walmsley, linux-riscv
In-Reply-To: <CAEUhbmWdLoRU1QGVZtwmymtYyQw43UMR8WDB17rJRmvXGbuBTg@mail.gmail.com>
On Fri, Jul 5, 2019 at 1:11 PM Bin Meng <bmeng.cn@gmail.com> wrote:
>
> On Fri, Jul 5, 2019 at 11:59 AM Anup Patel <Anup.Patel@wdc.com> wrote:
> >
> >
> >
> > > -----Original Message-----
> > > From: linux-riscv <linux-riscv-bounces@lists.infradead.org> On Behalf Of Bin
> > > Meng
> > > Sent: Friday, July 5, 2019 9:23 AM
> > > To: linux-riscv <linux-riscv@lists.infradead.org>; devicetree
> > > <devicetree@vger.kernel.org>; Rob Herring <robh+dt@kernel.org>; Mark
> > > Rutland <mark.rutland@arm.com>; Albert Ou <aou@eecs.berkeley.edu>;
> > > Paul Walmsley <paul.walmsley@sifive.com>; Palmer Dabbelt
> > > <palmer@sifive.com>; Yash Shah <yash.shah@sifive.com>
> > > Subject: [PATCH] riscv: dts: fu540-c000: Add "status" property to cpu node
> > >
> > > Per device tree spec, the "status" property property shall be present for
> > > nodes representing CPUs in a SMP configuration. This property is currently
> > > missing in cpu 1/2/3/4 node in the fu540-c000.dtsi.
> >
> > We don't need explicit "status = okay" for SOC internal devices
> > (such as PLIC, INTC, etc) which are always enabled by default.
> >
>
> Yes, that's fine because those device bindings do not require them.
>
> > Absence of "status" DT prop is treated as enabled by default.
> >
>
> But per current device tree spec, "status" in cpu node is mandatory.
> (spec uses "shall"). Missing it is a spec violation.
Ping?
Regards,
Bin
^ permalink raw reply
* RE: [PATCH] riscv: dts: fu540-c000: Add "status" property to cpu node
From: Anup Patel @ 2019-07-22 8:04 UTC (permalink / raw)
To: Bin Meng
Cc: Mark Rutland, devicetree, Albert Ou, Palmer Dabbelt, Yash Shah,
Rob Herring, Paul Walmsley, linux-riscv
In-Reply-To: <CAEUhbmU99JqdVXK4KKaRg+QSO=5tMPyet-dCmayD_fRx4nbCEg@mail.gmail.com>
> -----Original Message-----
> From: Bin Meng <bmeng.cn@gmail.com>
> Sent: Monday, July 22, 2019 1:32 PM
> To: Anup Patel <Anup.Patel@wdc.com>
> Cc: linux-riscv <linux-riscv@lists.infradead.org>; devicetree
> <devicetree@vger.kernel.org>; Rob Herring <robh+dt@kernel.org>; Mark
> Rutland <mark.rutland@arm.com>; Albert Ou <aou@eecs.berkeley.edu>;
> Paul Walmsley <paul.walmsley@sifive.com>; Palmer Dabbelt
> <palmer@sifive.com>; Yash Shah <yash.shah@sifive.com>
> Subject: Re: [PATCH] riscv: dts: fu540-c000: Add "status" property to cpu
> node
>
> On Fri, Jul 5, 2019 at 1:11 PM Bin Meng <bmeng.cn@gmail.com> wrote:
> >
> > On Fri, Jul 5, 2019 at 11:59 AM Anup Patel <Anup.Patel@wdc.com> wrote:
> > >
> > >
> > >
> > > > -----Original Message-----
> > > > From: linux-riscv <linux-riscv-bounces@lists.infradead.org> On
> > > > Behalf Of Bin Meng
> > > > Sent: Friday, July 5, 2019 9:23 AM
> > > > To: linux-riscv <linux-riscv@lists.infradead.org>; devicetree
> > > > <devicetree@vger.kernel.org>; Rob Herring <robh+dt@kernel.org>;
> > > > Mark Rutland <mark.rutland@arm.com>; Albert Ou
> > > > <aou@eecs.berkeley.edu>; Paul Walmsley
> <paul.walmsley@sifive.com>;
> > > > Palmer Dabbelt <palmer@sifive.com>; Yash Shah
> > > > <yash.shah@sifive.com>
> > > > Subject: [PATCH] riscv: dts: fu540-c000: Add "status" property to
> > > > cpu node
> > > >
> > > > Per device tree spec, the "status" property property shall be
> > > > present for nodes representing CPUs in a SMP configuration. This
> > > > property is currently missing in cpu 1/2/3/4 node in the fu540-c000.dtsi.
> > >
> > > We don't need explicit "status = okay" for SOC internal devices
> > > (such as PLIC, INTC, etc) which are always enabled by default.
> > >
> >
> > Yes, that's fine because those device bindings do not require them.
> >
> > > Absence of "status" DT prop is treated as enabled by default.
> > >
> >
> > But per current device tree spec, "status" in cpu node is mandatory.
> > (spec uses "shall"). Missing it is a spec violation.
>
> Ping?
I am fine with explicit status = "okay".
I am hoping DT maintainers will share there views on this.
Regards,
Anup
^ permalink raw reply
* Re: [PATCH] ARM: dts: am335x-wega.dtsi: fix wrong card detect pin level
From: Teresa Remmet @ 2019-07-22 8:06 UTC (permalink / raw)
To: Andreas Klinger, linux-omap
Cc: bcousson, tony, robh+dt, mark.rutland, devicetree, linux-kernel
In-Reply-To: <20190709183209.y64keopah5rkismc@arbad>
Hello Andreas,
Am Dienstag, den 09.07.2019, 20:32 +0200 schrieb Andreas Klinger:
> mmc cards on mmc1 are not detected because of wrong card detect (cd)
> level.
>
> Change cd from GPIO_ACTIVE_HIGH to GPIO_ACTIVE_LOW.
>
> This is necessary because of commit e63201f19438 ("mmc: omap_hsmmc:
> Delete platform data GPIO CD and WP")
Thanks for noticing. But the fix is already in master.
Teresa
>
> Signed-off-by: Andreas Klinger <ak@it-klinger.de>
> ---
> arch/arm/boot/dts/am335x-wega.dtsi | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/am335x-wega.dtsi
> b/arch/arm/boot/dts/am335x-wega.dtsi
> index b7d28a20341f..84581fed3d06 100644
> --- a/arch/arm/boot/dts/am335x-wega.dtsi
> +++ b/arch/arm/boot/dts/am335x-wega.dtsi
> @@ -157,7 +157,7 @@
> bus-width = <4>;
> pinctrl-names = "default";
> pinctrl-0 = <&mmc1_pins>;
> - cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
> + cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
> status = "okay";
> };
>
> --
> 2.11.0
>
>
^ permalink raw reply
* [PATCH 01/11] dt-bindings: timer: Convert Allwinner A10 Timer to a schema
From: Maxime Ripard @ 2019-07-22 8:12 UTC (permalink / raw)
To: Mark Rutland, Rob Herring, Frank Rowand, Chen-Yu Tsai,
Maxime Ripard, daniel.lezcano, tglx
Cc: devicetree, linux-arm-kernel
The older Allwinner SoCs have a Timer supported in Linux, with a matching
Device Tree binding.
While the original binding only mentions one interrupt, the timer actually
has 6 of them.
Now that we have the DT validation in place, let's convert the device tree
bindings for that controller over to a YAML schemas.
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
---
.../timer/allwinner,sun4i-a10-timer.yaml | 76 +++++++++++++++++++
.../bindings/timer/allwinner,sun4i-timer.txt | 19 -----
2 files changed, 76 insertions(+), 19 deletions(-)
create mode 100644 Documentation/devicetree/bindings/timer/allwinner,sun4i-a10-timer.yaml
delete mode 100644 Documentation/devicetree/bindings/timer/allwinner,sun4i-timer.txt
diff --git a/Documentation/devicetree/bindings/timer/allwinner,sun4i-a10-timer.yaml b/Documentation/devicetree/bindings/timer/allwinner,sun4i-a10-timer.yaml
new file mode 100644
index 000000000000..7292a424092c
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/allwinner,sun4i-a10-timer.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/allwinner,sun4i-a10-timer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 Timer Device Tree Bindings
+
+maintainers:
+ - Chen-Yu Tsai <wens@csie.org>
+ - Maxime Ripard <maxime.ripard@bootlin.com>
+
+properties:
+ compatible:
+ enum:
+ - allwinner,sun4i-a10-timer
+ - allwinner,suniv-f1c100s-timer
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ description:
+ List of timers interrupts
+
+ clocks:
+ maxItems: 1
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ items:
+ const: allwinner,sun4i-a10-timer
+
+ then:
+ properties:
+ interrupts:
+ minItems: 6
+ maxItems: 6
+
+ - if:
+ properties:
+ compatible:
+ items:
+ const: allwinner,suniv-f1c100s-timer
+
+ then:
+ properties:
+ interrupts:
+ minItems: 3
+ maxItems: 3
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+
+additionalProperties: false
+
+examples:
+ - |
+ timer {
+ compatible = "allwinner,sun4i-a10-timer";
+ reg = <0x01c20c00 0x400>;
+ interrupts = <22>,
+ <23>,
+ <24>,
+ <25>,
+ <67>,
+ <68>;
+ clocks = <&osc>;
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/timer/allwinner,sun4i-timer.txt b/Documentation/devicetree/bindings/timer/allwinner,sun4i-timer.txt
deleted file mode 100644
index 3da9d515c03a..000000000000
--- a/Documentation/devicetree/bindings/timer/allwinner,sun4i-timer.txt
+++ /dev/null
@@ -1,19 +0,0 @@
-Allwinner A1X SoCs Timer Controller
-
-Required properties:
-
-- compatible : should be one of the following:
- "allwinner,sun4i-a10-timer"
- "allwinner,suniv-f1c100s-timer"
-- reg : Specifies base physical address and size of the registers.
-- interrupts : The interrupt of the first timer
-- clocks: phandle to the source clock (usually a 24 MHz fixed clock)
-
-Example:
-
-timer {
- compatible = "allwinner,sun4i-a10-timer";
- reg = <0x01c20c00 0x400>;
- interrupts = <22>;
- clocks = <&osc>;
-};
--
2.21.0
^ permalink raw reply related
* [PATCH 02/11] dt-bindings: timer: Add missing compatibles
From: Maxime Ripard @ 2019-07-22 8:12 UTC (permalink / raw)
To: Mark Rutland, Rob Herring, Frank Rowand, Chen-Yu Tsai,
Maxime Ripard, daniel.lezcano, tglx
Cc: devicetree, linux-arm-kernel
In-Reply-To: <20190722081229.22422-1-maxime.ripard@bootlin.com>
Newer Allwinner SoCs have different number of interrupts, let's add
different compatibles for all of them to deal with this properly.
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
---
.../timer/allwinner,sun4i-a10-timer.yaml | 26 +++++++++++++++++++
1 file changed, 26 insertions(+)
diff --git a/Documentation/devicetree/bindings/timer/allwinner,sun4i-a10-timer.yaml b/Documentation/devicetree/bindings/timer/allwinner,sun4i-a10-timer.yaml
index 7292a424092c..20adc1c8e9cc 100644
--- a/Documentation/devicetree/bindings/timer/allwinner,sun4i-a10-timer.yaml
+++ b/Documentation/devicetree/bindings/timer/allwinner,sun4i-a10-timer.yaml
@@ -14,6 +14,8 @@ properties:
compatible:
enum:
- allwinner,sun4i-a10-timer
+ - allwinner,sun8i-a23-timer
+ - allwinner,sun8i-v3s-timer
- allwinner,suniv-f1c100s-timer
reg:
@@ -39,6 +41,30 @@ allOf:
minItems: 6
maxItems: 6
+ - if:
+ properties:
+ compatible:
+ items:
+ const: allwinner,sun8i-a23-timer
+
+ then:
+ properties:
+ interrupts:
+ minItems: 2
+ maxItems: 2
+
+ - if:
+ properties:
+ compatible:
+ items:
+ const: allwinner,sun8i-v3s-timer
+
+ then:
+ properties:
+ interrupts:
+ minItems: 3
+ maxItems: 3
+
- if:
properties:
compatible:
--
2.21.0
^ permalink raw reply related
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox