* Re: [PATCH v5 1/3] dt-bindings: media: mediatek-jpeg-decoder: add MT8189 compatible string
From: Krzysztof Kozlowski @ 2026-03-31 6:58 UTC (permalink / raw)
To: Jianhua Lin
Cc: nicolas, mchehab, robh, krzk+dt, conor+dt, matthias.bgg,
angelogioacchino.delregno, devicetree, linux-kernel, linux-media,
linux-arm-kernel, linux-mediatek,
Project_Global_Chrome_Upstream_Group, sirius.wang, vince-wl.liu,
jh.hsu
In-Reply-To: <20260331005458.24010-2-jianhua.lin@mediatek.com>
On Tue, Mar 31, 2026 at 08:54:56AM +0800, Jianhua Lin wrote:
> Add the compatible string for the JPEG decoder block found in the
> MediaTek MT8189 SoC.
>
> Compared to previous generation ICs, the MT8189 JPEG decoder requires
> 34-bit IOVA address space support and only needs a single clock
> ("jpgdec") instead of two. Therefore, it is added as a standalone
> compatible string without falling back to older SoCs.
>
> Update the binding schema to include the new compatible string and add
> an `allOf` block with conditional checks. This enforces the single clock
> requirement for MT8189 while preserving the two-clock requirement
> ("jpgdec-smi", "jpgdec") for older SoCs.
>
> Suggested-by: Rob Herring <robh@kernel.org>
> Signed-off-by: Jianhua Lin <jianhua.lin@mediatek.com>
> ---
> .../bindings/media/mediatek-jpeg-decoder.yaml | 44 +++++++++++++++----
> 1 file changed, 36 insertions(+), 8 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.yaml b/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.yaml
> index a4aacd3eb189..601fe05b73e7 100644
> --- a/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.yaml
> +++ b/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.yaml
> @@ -15,10 +15,10 @@ description: |-
> properties:
> compatible:
> oneOf:
> - - items:
> - - enum:
> - - mediatek,mt8173-jpgdec
> - - mediatek,mt2701-jpgdec
> + - enum:
> + - mediatek,mt2701-jpgdec
> + - mediatek,mt8173-jpgdec
> + - mediatek,mt8189-jpgdec
> - items:
> - enum:
> - mediatek,mt7623-jpgdec
> @@ -32,13 +32,22 @@ properties:
> maxItems: 1
>
> clocks:
> + minItems: 1
> maxItems: 2
> - minItems: 2
>
> clock-names:
> - items:
> - - const: jpgdec-smi
> - - const: jpgdec
> + minItems: 1
> + maxItems: 2
Why jpgdec-smi alone is now valid? Drop these two.
> + oneOf:
> + - items:
> + - const: jpgdec
> + - items:
> + - const: jpgdec-smi
> + - const: jpgdec
> +
> + mediatek,larb:
> + $ref: /schemas/types.yaml#/definitions/phandle
> + description: a phandle to the smi_larb node.
Best regards,
Krzysztof
^ permalink raw reply
* Re: [PATCH v5 1/9] dt-bindings: mmc: spacemit,sdhci: add pinctrl support for voltage switching
From: Krzysztof Kozlowski @ 2026-03-31 6:48 UTC (permalink / raw)
To: Iker Pedrosa
Cc: Ulf Hansson, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Adrian Hunter, Paul Walmsley, Palmer Dabbelt, Albert Ou,
Alexandre Ghiti, Yixun Lan, Michael Opdenacker,
Javier Martinez Canillas, linux-mmc, devicetree, linux-riscv,
spacemit, linux-kernel
In-Reply-To: <20260330-orangepi-sd-card-uhs-v5-1-bd853604322d@gmail.com>
On Mon, Mar 30, 2026 at 10:38:02AM +0200, Iker Pedrosa wrote:
> Document pinctrl properties to support voltage-dependent pin
> configuration switching for UHS-I SD card modes.
>
> Add optional pinctrl-names property with two states:
> - "default": For 3.3V operation with standard drive strength
> - "state_uhs": For 1.8V operation with optimized drive strength
>
> These pinctrl states allow the SDHCI driver to coordinate voltage
> switching with pin configuration changes, ensuring proper signal
> integrity during UHS-I mode transitions.
>
> Signed-off-by: Iker Pedrosa <ikerpedrosam@gmail.com>
> ---
> .../devicetree/bindings/mmc/spacemit,sdhci.yaml | 17 +++++++++++++++++
> 1 file changed, 17 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/mmc/spacemit,sdhci.yaml b/Documentation/devicetree/bindings/mmc/spacemit,sdhci.yaml
> index 9a055d963a7f0cdba4741c1e3e7269688dcd5f45..201ab97f0e88376a4680dcca7917e8b3172bd84a 100644
> --- a/Documentation/devicetree/bindings/mmc/spacemit,sdhci.yaml
> +++ b/Documentation/devicetree/bindings/mmc/spacemit,sdhci.yaml
> @@ -44,6 +44,20 @@ properties:
> - const: axi
> - const: sdh
>
> + pinctrl-names:
> + minItems: 1
> + maxItems: 2
> + items:
> + enum:
No, that's not enum but list. Look here:
> + - default
> + - state_uhs
Instead: uhs
> +
> + pinctrl-0:
> + description: Default pinctrl state for 3.3V operation
So first item must be default, not uhs
Best regards,
Krzysztof
^ permalink raw reply
* Re: [PATCH v28 2/4] dt-bindings: i2c: ast2600-i2c.yaml: Add global-regs and enable-dma properties
From: Krzysztof Kozlowski @ 2026-03-31 6:47 UTC (permalink / raw)
To: Ryan Chen
Cc: jk, andriy.shevchenko, Andi Shyti, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Joel Stanley, Andrew Jeffery,
Benjamin Herrenschmidt, Rayn Chen, Philipp Zabel, linux-i2c,
devicetree, linux-arm-kernel, linux-aspeed, linux-kernel, openbmc
In-Reply-To: <20260330-upstream_i2c-v28-2-17bdae39c5cb@aspeedtech.com>
On Mon, Mar 30, 2026 at 04:21:47PM +0800, Ryan Chen wrote:
> Add aspeed,enable-dma boolean property to indicate that DMA is
> available for transfers on this I2C bus.
>
> Also add the aspeed,global-regs phandle to reference the AST2600
> global registers syscon node, containing the SoC-common I2C register
> set.
>
> These properties apply only to the AST2600 binding. Legacy DTs remain
> unchanged.
>
> Signed-off-by: Ryan Chen <ryan_chen@aspeedtech.com>
> ---
> Changes in v28:
> - update commit message correspond with aspeed,enable-dma.
> - remove aspeed,transfer-mode and add aspeed,enable-dma property and
> description.
> - Fix aspeed,enable-dma description to reflect hardware capability rather
> than software behavior
> Changes in v27:
> - change aspeed,transfer-mode to aspeed,enable-dma.
> ---
> .../devicetree/bindings/i2c/aspeed,ast2600-i2c.yaml | 12 ++++++++++++
> 1 file changed, 12 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/i2c/aspeed,ast2600-i2c.yaml b/Documentation/devicetree/bindings/i2c/aspeed,ast2600-i2c.yaml
> index de2c359037da..67b23d1a4cec 100644
> --- a/Documentation/devicetree/bindings/i2c/aspeed,ast2600-i2c.yaml
> +++ b/Documentation/devicetree/bindings/i2c/aspeed,ast2600-i2c.yaml
> @@ -37,6 +37,16 @@ properties:
> resets:
> maxItems: 1
>
> + aspeed,enable-dma:
> + type: boolean
> + description: Indicates this I2C controller instance has DMA capability.
Compatible implies that "I2C controller instance has DMA capability", no?
How two same devices, with exactly the same or compatible programming
model can have difference in the programming model for DMA (one lacks
it)?
Best regards,
Krzysztof
^ permalink raw reply
* Re: [PATCH v3 1/2] dt-bindings: can: mcp251xfd: add microchip,xstbyen property
From: Viken Dadhaniya @ 2026-03-31 6:45 UTC (permalink / raw)
To: Marc Kleine-Budde
Cc: mani, thomas.kopp, mailhol, robh, krzk+dt, conor+dt, andersson,
konradybcio, linusw, brgl, linux-can, devicetree, linux-kernel,
linux-arm-msm, linux-gpio, mukesh.savaliya, anup.kulkarni,
Conor Dooley
In-Reply-To: <20260323-surname-osmosis-3cceca19c824@spud>
Hi Marc,
Could you please let me know if the driver change looks acceptable to be merged?
Once merged, I will proceed with posting the device-tree change.
Thanks
Viken
On 3/24/2026 3:00 AM, Conor Dooley wrote:
> On Mon, Mar 23, 2026 at 09:37:24PM +0100, Marc Kleine-Budde wrote:
>> On 23.03.2026 19:30:00, Conor Dooley wrote:
>>>> diff --git a/Documentation/devicetree/bindings/net/can/microchip,mcp251xfd.yaml b/Documentation/devicetree/bindings/net/can/microchip,mcp251xfd.yaml
>>>> index 2d13638ebc6a..28e494262cd9 100644
>>>> --- a/Documentation/devicetree/bindings/net/can/microchip,mcp251xfd.yaml
>>>> +++ b/Documentation/devicetree/bindings/net/can/microchip,mcp251xfd.yaml
>>>> @@ -44,6 +44,14 @@ properties:
>>>> signals a pending RX interrupt.
>>>> maxItems: 1
>>>>
>>>> + microchip,xstbyen:
>>>> + type: boolean
>>>> + description:
>>>> + If present, configure the INT0/GPIO0/XSTBY pin as transceiver standby
>>>> + control. The pin is driven low when the controller is active and high
>>>> + when it enters Sleep mode, allowing automatic standby control of an
>>>> + external CAN transceiver connected to this pin.
>>>
>>> What I don't understand from this patch is why a property for this is
>>> required.
>>> Why can't this mode be implied from the lack of rx-int-gpios or
>>> interrupts?
>>
>> The mcp251xfd has 2 GPIO pins. "rx-int-gpios" is for the other pin:
>> INT1/GPIO1. Also by default I don't want the controller to drive a pin
>> in a certain direction.
>
> Oke.
> Acked-by: Conor Dooley <conor.dooley@microchip.com>
^ permalink raw reply
* Re: [PATCH v1 1/2] dt-bindings: riscv: spacemit: add deepcomputing,fml13v05
From: 曹珊珊 @ 2026-03-31 6:38 UTC (permalink / raw)
To: Troy Mitchell
Cc: Yixun Lan, Conor Dooley, Emil Renner Berthing, Rob Herring,
Krzysztof Kozlowski, Paul Walmsley, Palmer Dabbelt, Albert Ou,
Heinrich Schuchardt, Troy Mitchell, Michael Opdenacker,
Guodong Xu, Hendrik Hamerlinck, Yangyu Chen, spacemit,
linux-riscv, devicetree, linux-kernel
In-Reply-To: <DHGR42QJK86L.10IAY9CB3RZH5@linux.spacemit.com>
> On Tue Mar 31, 2026 at 2:15 PM CST, 曹珊珊 wrote:
> >
> >> From: "Yixun Lan"<dlan@kernel.org>
> >> Date: Tue, Mar 31, 2026, 14:03
> >> Subject: Re: [PATCH v1 1/2] dt-bindings: riscv: spacemit: add deepcomputing,fml13v05
> >> To: "Sandie Cao"<sandie.cao@deepcomputing.io>
> >> Cc: "Conor Dooley"<conor+dt@kernel.org>, "Emil Renner Berthing"<kernel@esmil.dk>, "Rob Herring"<robh@kernel.org>, "Krzysztof Kozlowski"<krzk+dt@kernel.org>, "Paul Walmsley"<paul.walmsley@sifive.com>, "Palmer Dabbelt"<palmer@dabbelt.com>, "Albert Ou"<aou@eecs.berkeley.edu>, "Heinrich Schuchardt"<heinrich.schuchardt@canonical.com>, "Troy Mitchell"<troy.mitchell@linux.spacemit.com>, "Michael Opdenacker"<michael.opdenacker@rootcommit.com>, "Guodong Xu"<guodong@riscstar.com>, "Hendrik Hamerlinck"<hendrik.hamerlinck@hammernet.be>, "Yangyu Chen"<cyy@cyyself.name>, <spacemit@lists.linux.dev>, <linux-riscv@lists.infradead.org>, <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>
> I'm just confused as to why this appeared in the body.
>
> - Troy
>
This was the format of my email sender.
I correct it now.
Thanks.
Sandie
^ permalink raw reply
* Re: [PATCH v4 1/3] dt-bindings: media: camss: Add qcom,sm6350-camss
From: Luca Weiss @ 2026-03-31 6:38 UTC (permalink / raw)
To: Vladimir Zapolskiy, Luca Weiss, Bryan O'Donoghue, Robert Foss,
Todor Tomov, Mauro Carvalho Chehab, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Bryan O'Donoghue,
Bjorn Andersson, Konrad Dybcio
Cc: ~postmarketos/upstreaming, phone-devel, linux-arm-msm,
linux-media, devicetree, linux-kernel, Krzysztof Kozlowski
In-Reply-To: <fe00906e-fb06-44e3-985b-3d0e95839e43@linaro.org>
On Tue Mar 31, 2026 at 12:57 AM CEST, Vladimir Zapolskiy wrote:
> On 2/16/26 10:54, Luca Weiss wrote:
>> Add bindings for the Camera Subsystem on the SM6350 SoC.
>>
>> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
>> Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
>> ---
>> .../bindings/media/qcom,sm6350-camss.yaml | 471 +++++++++++++++++++++
>> 1 file changed, 471 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/media/qcom,sm6350-camss.yaml b/Documentation/devicetree/bindings/media/qcom,sm6350-camss.yaml
>> new file mode 100644
>> index 000000000000..96974d90d8c4
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/media/qcom,sm6350-camss.yaml
>> @@ -0,0 +1,471 @@
>> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/media/qcom,sm6350-camss.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Qualcomm SM6350 Camera Subsystem (CAMSS)
>> +
>> +maintainers:
>> + - Luca Weiss <luca.weiss@fairphone.com>
>> +
>> +description:
>> + The CAMSS IP is a CSI decoder and ISP present on Qualcomm platforms.
>> +
>> +properties:
>> + compatible:
>> + const: qcom,sm6350-camss
>> +
>> + reg:
>> + maxItems: 24
>> +
>> + reg-names:
>> + items:
>> + - const: csid0
>> + - const: csid1
>> + - const: csid2
>> + - const: csid_lite
>> + - const: csiphy0
>> + - const: csiphy1
>> + - const: csiphy2
>> + - const: csiphy3
>> + - const: vfe0
>> + - const: vfe1
>> + - const: vfe2
>> + - const: vfe_lite
>> + - const: a5_csr
>> + - const: a5_qgic
>> + - const: a5_sierra
>> + - const: bps
>> + - const: camnoc
>> + - const: core_top_csr_tcsr
>> + - const: cpas_cdm
>> + - const: cpas_top
>> + - const: ipe
>> + - const: jpeg_dma
>> + - const: jpeg_enc
>> + - const: lrme
>> +
>> + clocks:
>> + maxItems: 39
>> +
>> + clock-names:
>> + items:
>> + - const: cam_axi
>> + - const: soc_ahb
>> + - const: camnoc_axi
>> + - const: core_ahb
>> + - const: cpas_ahb
>> + - const: csiphy0
>> + - const: csiphy0_timer
>> + - const: csiphy1
>> + - const: csiphy1_timer
>> + - const: csiphy2
>> + - const: csiphy2_timer
>> + - const: csiphy3
>> + - const: csiphy3_timer
>> + - const: vfe0_axi
>> + - const: vfe0
>> + - const: vfe0_cphy_rx
>> + - const: vfe0_csid
>> + - const: vfe1_axi
>> + - const: vfe1
>> + - const: vfe1_cphy_rx
>> + - const: vfe1_csid
>> + - const: vfe2_axi
>> + - const: vfe2
>> + - const: vfe2_cphy_rx
>> + - const: vfe2_csid
>> + - const: vfe_lite
>> + - const: vfe_lite_cphy_rx
>> + - const: vfe_lite_csid
>> + - const: bps
>> + - const: bps_ahb
>> + - const: bps_areg
>> + - const: bps_axi
>> + - const: icp
>> + - const: ipe0
>> + - const: ipe0_ahb
>> + - const: ipe0_areg
>> + - const: ipe0_axi
>> + - const: jpeg
>> + - const: lrme
>> +
>> + interrupts:
>> + maxItems: 18
>> +
>> + interrupt-names:
>> + items:
>> + - const: csid0
>> + - const: csid1
>> + - const: csid2
>> + - const: csid_lite
>> + - const: csiphy0
>> + - const: csiphy1
>> + - const: csiphy2
>> + - const: csiphy3
>> + - const: vfe0
>> + - const: vfe1
>> + - const: vfe2
>> + - const: vfe_lite
>> + - const: a5
>> + - const: cpas
>> + - const: cpas_cdm
>> + - const: jpeg_dma
>> + - const: jpeg_enc
>> + - const: lrme
>> +
>> + interconnects:
>> + maxItems: 4
>> +
>> + interconnect-names:
>> + items:
>> + - const: ahb
>> + - const: hf_mnoc
>> + - const: sf_mnoc
>> + - const: sf_icp_mnoc
>> +
>> + iommus:
>> + maxItems: 14
>> +
>> + power-domains:
>> + maxItems: 6
>> +
>> + power-domain-names:
>> + items:
>> + - const: ife0
>> + - const: ife1
>> + - const: ife2
>> + - const: top
>> + - const: bps
>> + - const: ipe
>
> I've lost the content, why 'top' is somewhere in the middle?
https://lore.kernel.org/linux-arm-msm/20260214-slick-ringtail-of-innovation-d8eecd@quoll/
>
>> +
>> + vdd-csiphy0-0p9-supply:
>> + description:
>> + Phandle to a 0.9V regulator supply to CSIPHY0.
>> +
>> + vdd-csiphy0-1p25-supply:
>> + description:
>> + Phandle to a 1.25V regulator supply to CSIPHY0.
>> +
>> + vdd-csiphy1-0p9-supply:
>> + description:
>> + Phandle to a 0.9V regulator supply to CSIPHY1.
>> +
>> + vdd-csiphy1-1p25-supply:
>> + description:
>> + Phandle to a 1.25V regulator supply to CSIPHY1.
>> +
>> + vdd-csiphy2-0p9-supply:
>> + description:
>> + Phandle to a 0.9V regulator supply to CSIPHY2.
>> +
>> + vdd-csiphy2-1p25-supply:
>> + description:
>> + Phandle to a 1.25V regulator supply to CSIPHY2.
>> +
>> + vdd-csiphy3-0p9-supply:
>> + description:
>> + Phandle to a 0.9V regulator supply to CSIPHY3.
>> +
>> + vdd-csiphy3-1p25-supply:
>> + description:
>> + Phandle to a 1.25V regulator supply to CSIPHY3.
>> +
>> + ports:
>> + $ref: /schemas/graph.yaml#/properties/ports
>> +
>> + description:
>> + CSI input ports.
>> +
>> + patternProperties:
>> + "^port@[0-3]$":
>> + $ref: /schemas/graph.yaml#/$defs/port-base
>> + unevaluatedProperties: false
>> +
>> + description:
>> + Input port for receiving CSI data from a CSIPHY.
>> +
>> + properties:
>> + endpoint:
>> + $ref: video-interfaces.yaml#
>> + unevaluatedProperties: false
>> +
>> + properties:
>> + data-lanes:
>> + minItems: 1
>> + maxItems: 4
>> +
>> + bus-type:
>> + enum:
>> + - 1 # MEDIA_BUS_TYPE_CSI2_CPHY
>> + - 4 # MEDIA_BUS_TYPE_CSI2_DPHY
>> +
>> + required:
>> + - data-lanes
>> +
>> +required:
>> + - compatible
>> + - reg
>> + - reg-names
>> + - clocks
>> + - clock-names
>> + - interrupts
>> + - interrupt-names
>> + - interconnects
>> + - interconnect-names
>> + - iommus
>> + - power-domains
>> + - power-domain-names
>> + - ports
>> +
>> +additionalProperties: false
>> +
>> +examples:
>> + - |
>> + #include <dt-bindings/clock/qcom,gcc-sm6350.h>
>> + #include <dt-bindings/clock/qcom,sm6350-camcc.h>
>> + #include <dt-bindings/interconnect/qcom,icc.h>
>> + #include <dt-bindings/interconnect/qcom,sm6350.h>
>> + #include <dt-bindings/interrupt-controller/arm-gic.h>
>> + #include <dt-bindings/media/video-interfaces.h>
>> + #include <dt-bindings/power/qcom-rpmpd.h>
>> +
>> + soc {
>> + #address-cells = <2>;
>> + #size-cells = <2>;
>> +
>> + isp@acb3000 {
>> + compatible = "qcom,sm6350-camss";
>> +
>> + reg = <0x0 0x0acb3000 0x0 0x1000>,
>> + <0x0 0x0acba000 0x0 0x1000>,
>> + <0x0 0x0acc1000 0x0 0x1000>,
>> + <0x0 0x0acc8000 0x0 0x1000>,
>> + <0x0 0x0ac65000 0x0 0x1000>,
>> + <0x0 0x0ac66000 0x0 0x1000>,
>> + <0x0 0x0ac67000 0x0 0x1000>,
>> + <0x0 0x0ac68000 0x0 0x1000>,
>> + <0x0 0x0acaf000 0x0 0x4000>,
>> + <0x0 0x0acb6000 0x0 0x4000>,
>> + <0x0 0x0acbd000 0x0 0x4000>,
>> + <0x0 0x0acc4000 0x0 0x4000>,
>> + <0x0 0x0ac18000 0x0 0x3000>,
>> + <0x0 0x0ac00000 0x0 0x6000>,
>> + <0x0 0x0ac10000 0x0 0x8000>,
>> + <0x0 0x0ac6f000 0x0 0x8000>,
>> + <0x0 0x0ac42000 0x0 0x4600>,
>> + <0x0 0x01fc0000 0x0 0x40000>,
>> + <0x0 0x0ac48000 0x0 0x1000>,
>> + <0x0 0x0ac40000 0x0 0x1000>,
>> + <0x0 0x0ac87000 0x0 0xa000>,
>> + <0x0 0x0ac52000 0x0 0x4000>,
>> + <0x0 0x0ac4e000 0x0 0x4000>,
>> + <0x0 0x0ac6b000 0x0 0xa00>;
>> + reg-names = "csid0",
>> + "csid1",
>> + "csid2",
>> + "csid_lite",
>> + "csiphy0",
>> + "csiphy1",
>> + "csiphy2",
>> + "csiphy3",
>> + "vfe0",
>> + "vfe1",
>> + "vfe2",
>> + "vfe_lite",
>> + "a5_csr",
>> + "a5_qgic",
>> + "a5_sierra",
>> + "bps",
>> + "camnoc",
>> + "core_top_csr_tcsr",
>> + "cpas_cdm",
>> + "cpas_top",
>> + "ipe",
>> + "jpeg_dma",
>> + "jpeg_enc",
>> + "lrme";
>> +
>> + clocks = <&gcc GCC_CAMERA_AXI_CLK>,
>> + <&camcc CAMCC_SOC_AHB_CLK>,
>> + <&camcc CAMCC_CAMNOC_AXI_CLK>,
>> + <&camcc CAMCC_CORE_AHB_CLK>,
>> + <&camcc CAMCC_CPAS_AHB_CLK>,
>> + <&camcc CAMCC_CSIPHY0_CLK>,
>> + <&camcc CAMCC_CSI0PHYTIMER_CLK>,
>> + <&camcc CAMCC_CSIPHY1_CLK>,
>> + <&camcc CAMCC_CSI1PHYTIMER_CLK>,
>> + <&camcc CAMCC_CSIPHY2_CLK>,
>> + <&camcc CAMCC_CSI2PHYTIMER_CLK>,
>> + <&camcc CAMCC_CSIPHY3_CLK>,
>> + <&camcc CAMCC_CSI3PHYTIMER_CLK>,
>> + <&camcc CAMCC_IFE_0_AXI_CLK>,
>> + <&camcc CAMCC_IFE_0_CLK>,
>> + <&camcc CAMCC_IFE_0_CPHY_RX_CLK>,
>> + <&camcc CAMCC_IFE_0_CSID_CLK>,
>> + <&camcc CAMCC_IFE_1_AXI_CLK>,
>> + <&camcc CAMCC_IFE_1_CLK>,
>> + <&camcc CAMCC_IFE_1_CPHY_RX_CLK>,
>> + <&camcc CAMCC_IFE_1_CSID_CLK>,
>> + <&camcc CAMCC_IFE_2_AXI_CLK>,
>> + <&camcc CAMCC_IFE_2_CLK>,
>> + <&camcc CAMCC_IFE_2_CPHY_RX_CLK>,
>> + <&camcc CAMCC_IFE_2_CSID_CLK>,
>> + <&camcc CAMCC_IFE_LITE_CLK>,
>> + <&camcc CAMCC_IFE_LITE_CPHY_RX_CLK>,
>> + <&camcc CAMCC_IFE_LITE_CSID_CLK>,
>> + <&camcc CAMCC_BPS_CLK>,
>> + <&camcc CAMCC_BPS_AHB_CLK>,
>> + <&camcc CAMCC_BPS_AREG_CLK>,
>> + <&camcc CAMCC_BPS_AXI_CLK>,
>> + <&camcc CAMCC_ICP_CLK>,
>> + <&camcc CAMCC_IPE_0_CLK>,
>> + <&camcc CAMCC_IPE_0_AHB_CLK>,
>> + <&camcc CAMCC_IPE_0_AREG_CLK>,
>> + <&camcc CAMCC_IPE_0_AXI_CLK>,
>> + <&camcc CAMCC_JPEG_CLK>,
>> + <&camcc CAMCC_LRME_CLK>;
>> + clock-names = "cam_axi",
>> + "soc_ahb",
>> + "camnoc_axi",
>> + "core_ahb",
>> + "cpas_ahb",
>> + "csiphy0",
>> + "csiphy0_timer",
>> + "csiphy1",
>> + "csiphy1_timer",
>> + "csiphy2",
>> + "csiphy2_timer",
>> + "csiphy3",
>> + "csiphy3_timer",
>> + "vfe0_axi",
>> + "vfe0",
>> + "vfe0_cphy_rx",
>> + "vfe0_csid",
>> + "vfe1_axi",
>> + "vfe1",
>> + "vfe1_cphy_rx",
>> + "vfe1_csid",
>> + "vfe2_axi",
>> + "vfe2",
>> + "vfe2_cphy_rx",
>> + "vfe2_csid",
>> + "vfe_lite",
>> + "vfe_lite_cphy_rx",
>> + "vfe_lite_csid",
>> + "bps",
>> + "bps_ahb",
>> + "bps_areg",
>> + "bps_axi",
>> + "icp",
>> + "ipe0",
>> + "ipe0_ahb",
>> + "ipe0_areg",
>> + "ipe0_axi",
>> + "jpeg",
>> + "lrme";
>> +
>> + interrupts = <GIC_SPI 464 IRQ_TYPE_EDGE_RISING>,
>> + <GIC_SPI 466 IRQ_TYPE_EDGE_RISING>,
>> + <GIC_SPI 717 IRQ_TYPE_EDGE_RISING>,
>> + <GIC_SPI 473 IRQ_TYPE_EDGE_RISING>,
>> + <GIC_SPI 477 IRQ_TYPE_EDGE_RISING>,
>> + <GIC_SPI 478 IRQ_TYPE_EDGE_RISING>,
>> + <GIC_SPI 479 IRQ_TYPE_EDGE_RISING>,
>> + <GIC_SPI 461 IRQ_TYPE_EDGE_RISING>,
>> + <GIC_SPI 465 IRQ_TYPE_EDGE_RISING>,
>> + <GIC_SPI 467 IRQ_TYPE_EDGE_RISING>,
>> + <GIC_SPI 718 IRQ_TYPE_EDGE_RISING>,
>> + <GIC_SPI 472 IRQ_TYPE_EDGE_RISING>,
>> + <GIC_SPI 463 IRQ_TYPE_EDGE_RISING>,
>> + <GIC_SPI 459 IRQ_TYPE_EDGE_RISING>,
>> + <GIC_SPI 469 IRQ_TYPE_EDGE_RISING>,
>> + <GIC_SPI 475 IRQ_TYPE_EDGE_RISING>,
>> + <GIC_SPI 474 IRQ_TYPE_EDGE_RISING>,
>> + <GIC_SPI 476 IRQ_TYPE_EDGE_RISING>;
>> + interrupt-names = "csid0",
>> + "csid1",
>> + "csid2",
>> + "csid_lite",
>> + "csiphy0",
>> + "csiphy1",
>> + "csiphy2",
>> + "csiphy3",
>> + "vfe0",
>> + "vfe1",
>> + "vfe2",
>> + "vfe_lite",
>> + "a5",
>> + "cpas",
>> + "cpas_cdm",
>> + "jpeg_dma",
>> + "jpeg_enc",
>> + "lrme";
>> +
>> + interconnects = <&gem_noc MASTER_AMPSS_M0 QCOM_ICC_TAG_ACTIVE_ONLY
>> + &config_noc SLAVE_CAMERA_CFG QCOM_ICC_TAG_ACTIVE_ONLY>,
>> + <&mmss_noc MASTER_CAMNOC_HF QCOM_ICC_TAG_ALWAYS
>> + &clk_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ALWAYS>,
>> + <&mmss_noc MASTER_CAMNOC_SF QCOM_ICC_TAG_ALWAYS
>> + &clk_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ALWAYS>,
>> + <&mmss_noc MASTER_CAMNOC_ICP QCOM_ICC_TAG_ALWAYS
>> + &clk_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ALWAYS>;
>> + interconnect-names = "ahb",
>> + "hf_mnoc",
>> + "sf_mnoc",
>> + "sf_icp_mnoc";
>> +
>> + iommus = <&apps_smmu 0x820 0xc0>,
>> + <&apps_smmu 0x840 0x0>,
>> + <&apps_smmu 0x860 0xc0>,
>> + <&apps_smmu 0x880 0x0>,
>> + <&apps_smmu 0xc40 0x20>,
>> + <&apps_smmu 0xc60 0x20>,
>> + <&apps_smmu 0xc80 0x0>,
>> + <&apps_smmu 0xca2 0x0>,
>> + <&apps_smmu 0xcc0 0x20>,
>> + <&apps_smmu 0xce0 0x20>,
>> + <&apps_smmu 0xd00 0x20>,
>> + <&apps_smmu 0xd20 0x20>,
>> + <&apps_smmu 0xd40 0x20>,
>> + <&apps_smmu 0xd60 0x20>;
>> +
>> + power-domains = <&camcc IFE_0_GDSC>,
>> + <&camcc IFE_1_GDSC>,
>> + <&camcc IFE_2_GDSC>,
>> + <&camcc TITAN_TOP_GDSC>,
>> + <&camcc BPS_GDSC>,
>> + <&camcc IPE_0_GDSC>;
>> + power-domain-names = "ife0",
>> + "ife1",
>> + "ife2",
>> + "top",
>> + "bps",
>> + "ipe";
>> +
>> + vdd-csiphy0-0p9-supply = <&vreg_l18a>;
>> + vdd-csiphy0-1p25-supply = <&vreg_l22a>;
>> + vdd-csiphy1-0p9-supply = <&vreg_l18a>;
>> + vdd-csiphy1-1p25-supply = <&vreg_l22a>;
>> + vdd-csiphy2-0p9-supply = <&vreg_l18a>;
>> + vdd-csiphy2-1p25-supply = <&vreg_l22a>;
>> + vdd-csiphy3-0p9-supply = <&vreg_l18a>;
>> + vdd-csiphy3-1p25-supply = <&vreg_l22a>;
>> +
>> + ports {
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> +
>> + port@0 {
>> + reg = <0>;
>> +
>> + csiphy0_ep: endpoint {
>> + data-lanes = <0 1 2 3>;
>> + bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>;
>> + remote-endpoint = <&sensor_ep>;
>> + };
>> + };
>> + };
>> + };
>> + };
>>
>
> Because CAMSS device tree nodes are far from being settled down, one
> more time I can just express my opinion that there is no good enough
> reason to describe all clocks and interconnects prematurely, anyway
Would be nice if the camss maintainers were aligned so that contributors
don't have to deal with mailing list conflicts over these fundamental
things.
It doesn't really make it fun to contribute if you get conflicting
opinions from two people that you should both value the opinion of
because they're maintainer.
> Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Thanks!
Regards
Luca
^ permalink raw reply
* Re: [PATCH v1 1/2] dt-bindings: riscv: spacemit: add deepcomputing,fml13v05
From: Troy Mitchell @ 2026-03-31 6:24 UTC (permalink / raw)
To: 曹珊珊, Yixun Lan
Cc: Conor Dooley, Emil Renner Berthing, Rob Herring,
Krzysztof Kozlowski, Paul Walmsley, Palmer Dabbelt, Albert Ou,
Heinrich Schuchardt, Troy Mitchell, Michael Opdenacker,
Guodong Xu, Hendrik Hamerlinck, Yangyu Chen, spacemit,
linux-riscv, devicetree, linux-kernel
In-Reply-To: <407ce3d77416bb2522b7906b0df3d5adf02c27ee.d811f619.24b1.431f.ad4d.c0bae1097eb9@feishu.cn>
On Tue Mar 31, 2026 at 2:15 PM CST, 曹珊珊 wrote:
>
>> From: "Yixun Lan"<dlan@kernel.org>
>> Date: Tue, Mar 31, 2026, 14:03
>> Subject: Re: [PATCH v1 1/2] dt-bindings: riscv: spacemit: add deepcomputing,fml13v05
>> To: "Sandie Cao"<sandie.cao@deepcomputing.io>
>> Cc: "Conor Dooley"<conor+dt@kernel.org>, "Emil Renner Berthing"<kernel@esmil.dk>, "Rob Herring"<robh@kernel.org>, "Krzysztof Kozlowski"<krzk+dt@kernel.org>, "Paul Walmsley"<paul.walmsley@sifive.com>, "Palmer Dabbelt"<palmer@dabbelt.com>, "Albert Ou"<aou@eecs.berkeley.edu>, "Heinrich Schuchardt"<heinrich.schuchardt@canonical.com>, "Troy Mitchell"<troy.mitchell@linux.spacemit.com>, "Michael Opdenacker"<michael.opdenacker@rootcommit.com>, "Guodong Xu"<guodong@riscstar.com>, "Hendrik Hamerlinck"<hendrik.hamerlinck@hammernet.be>, "Yangyu Chen"<cyy@cyyself.name>, <spacemit@lists.linux.dev>, <linux-riscv@lists.infradead.org>, <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>
I'm just confused as to why this appeared in the body.
- Troy
^ permalink raw reply
* Re: [PATCH v1 1/2] dt-bindings: riscv: spacemit: add deepcomputing,fml13v05
From: 曹珊珊 @ 2026-03-31 6:15 UTC (permalink / raw)
To: Yixun Lan
Cc: Conor Dooley, Emil Renner Berthing, Rob Herring,
Krzysztof Kozlowski, Paul Walmsley, Palmer Dabbelt, Albert Ou,
Heinrich Schuchardt, Troy Mitchell, Michael Opdenacker,
Guodong Xu, Hendrik Hamerlinck, Yangyu Chen, spacemit,
linux-riscv, devicetree, linux-kernel
In-Reply-To: <20260331060344-GKA976850@kernel.org>
> From: "Yixun Lan"<dlan@kernel.org>
> Date: Tue, Mar 31, 2026, 14:03
> Subject: Re: [PATCH v1 1/2] dt-bindings: riscv: spacemit: add deepcomputing,fml13v05
> To: "Sandie Cao"<sandie.cao@deepcomputing.io>
> Cc: "Conor Dooley"<conor+dt@kernel.org>, "Emil Renner Berthing"<kernel@esmil.dk>, "Rob Herring"<robh@kernel.org>, "Krzysztof Kozlowski"<krzk+dt@kernel.org>, "Paul Walmsley"<paul.walmsley@sifive.com>, "Palmer Dabbelt"<palmer@dabbelt.com>, "Albert Ou"<aou@eecs.berkeley.edu>, "Heinrich Schuchardt"<heinrich.schuchardt@canonical.com>, "Troy Mitchell"<troy.mitchell@linux.spacemit.com>, "Michael Opdenacker"<michael.opdenacker@rootcommit.com>, "Guodong Xu"<guodong@riscstar.com>, "Hendrik Hamerlinck"<hendrik.hamerlinck@hammernet.be>, "Yangyu Chen"<cyy@cyyself.name>, <spacemit@lists.linux.dev>, <linux-riscv@lists.infradead.org>, <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>
> Hi Sandie,
> On 11:45 Tue 31 Mar , Sandie Cao wrote:
> > From: sandiecao <sandie.cao@deepcomputing.io>
>
> Can you use more formal format for your name? which,
> Sandie Cao <sandie.cao@deepcomputing.io>
OK. Got it. I will fix it in next version.
Sandie
>
> >
> > Document the compatible string for the Deepcomputing fml13v05.
> > It's based on the SpacemiT K3 RISC-V SoC and is designed for the Framework
> > Laptop 13 Chassis, which has (Framework) SKU FRANHQ0001.
> >
> > Signed-off-by: sandiecao <sandie.cao@deepcomputing.io>
> same here
> > Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
> > ---
> > Documentation/devicetree/bindings/riscv/spacemit.yaml | 1 +
> > 1 file changed, 1 insertion(+)
> >
> > diff --git a/Documentation/devicetree/bindings/riscv/spacemit.yaml b/Documentation/devicetree/bindings/riscv/spacemit.yaml
> > index b958b94a924d..af8030242bdc 100644
> > --- a/Documentation/devicetree/bindings/riscv/spacemit.yaml
> > +++ b/Documentation/devicetree/bindings/riscv/spacemit.yaml
> > @@ -29,6 +29,7 @@ properties:
> > - const: spacemit,k1
> > - items:
> > - enum:
> > + - deepcomputing,fml13v05
> > - spacemit,k3-pico-itx
> > - const: spacemit,k3
> >
> > --
> > 2.43.0
>
> --
> Yixun Lan (dlan)
>
^ permalink raw reply
* Re: [PATCH v1 1/2] dt-bindings: riscv: spacemit: add deepcomputing,fml13v05
From: Yixun Lan @ 2026-03-31 6:03 UTC (permalink / raw)
To: Sandie Cao
Cc: Conor Dooley, Emil Renner Berthing, Rob Herring,
Krzysztof Kozlowski, Paul Walmsley, Palmer Dabbelt, Albert Ou,
Heinrich Schuchardt, Troy Mitchell, Michael Opdenacker,
Guodong Xu, Hendrik Hamerlinck, Yangyu Chen, spacemit,
linux-riscv, devicetree, linux-kernel
In-Reply-To: <20260331034539.67167-1-sandie.cao@deepcomputing.io>
Hi Sandie,
On 11:45 Tue 31 Mar , Sandie Cao wrote:
> From: sandiecao <sandie.cao@deepcomputing.io>
Can you use more formal format for your name? which,
Sandie Cao <sandie.cao@deepcomputing.io>
>
> Document the compatible string for the Deepcomputing fml13v05.
> It's based on the SpacemiT K3 RISC-V SoC and is designed for the Framework
> Laptop 13 Chassis, which has (Framework) SKU FRANHQ0001.
>
> Signed-off-by: sandiecao <sandie.cao@deepcomputing.io>
same here
> Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
> ---
> Documentation/devicetree/bindings/riscv/spacemit.yaml | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/Documentation/devicetree/bindings/riscv/spacemit.yaml b/Documentation/devicetree/bindings/riscv/spacemit.yaml
> index b958b94a924d..af8030242bdc 100644
> --- a/Documentation/devicetree/bindings/riscv/spacemit.yaml
> +++ b/Documentation/devicetree/bindings/riscv/spacemit.yaml
> @@ -29,6 +29,7 @@ properties:
> - const: spacemit,k1
> - items:
> - enum:
> + - deepcomputing,fml13v05
> - spacemit,k3-pico-itx
> - const: spacemit,k3
>
> --
> 2.43.0
--
Yixun Lan (dlan)
^ permalink raw reply
* [PATCH v16 3/3] arm64: dts: qcom: talos-evk: Add support for QCS615 talos evk board
From: Sudarshan Shetty @ 2026-03-31 6:01 UTC (permalink / raw)
To: andersson, konradybcio
Cc: robh, krzk+dt, conor+dt, linux-arm-msm, devicetree, linux-kernel,
Sudarshan Shetty, Dmitry Baryshkov, Konrad Dybcio
In-Reply-To: <20260331060107.501561-1-tessolveupstream@gmail.com>
Add the device tree for the QCS615-based Talos EVK platform. The
platform is composed of a System-on-Module following the SMARC
standard, and a Carrier Board.
The Carrier Board supports several display configurations, HDMI and
LVDS. Both configurations use the same base hardware, with the display
selection controlled by a DIP switch.
Use a DTBO file, talos-evk-lvds-auo,g133han01.dtso, which defines an
overlay that disables HDMI and adds LVDS. The DTs file talos-evk
can describe the HDMI display configurations.
According to the hardware design and vendor guidance, the WiFi PA
supplies VDD_PA_A and VDD_PA_B only need to be enabled at the same time
as asserting WLAN_EN.
On this platform, WiFi enablement is controlled via the WLAN_EN GPIO
(GPIO84), which also drives the VDD_PA_A and VDD_PA_B power enables.
Remove the VDD_PA_A and VDD_PA_B regulator nodes from the device tree
and rely on WLAN_EN to enable WiFi functionality.
Add talos-evk-usb1-peripheral.dtso overlay to enable USB0 peripheral
(EDL) mode. The base DTS will keep USB0 host-only due to hardware
routing through the EDL DIP switch, and the overlay switches the
configuration for device-mode operation.
The LVDS backlight hardware has been updated to use a simplified
design. The backlight enable signal is now permanently pulled up
to 3.3V and is no longer controlled via GPIO59.
Remove the GPIO59 based backlight configuration from the device
tree, as it is no longer routed to the LVDS interface.
The initial device tree includes support for:
- CPU and memory
- UART
- GPIOs
- Regulators
- PMIC
- Early console
- AT24MAC602 EEPROM
- MCP2515 SPI to CAN
- ADV7535 DSI-to-HDMI bridge
- DisplayPort interface
- SN65DSI84ZXHR DSI-to-LVDS bridge
- Wi-Fi/BT
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Sudarshan Shetty <tessolveupstream@gmail.com>
---
arch/arm64/boot/dts/qcom/Makefile | 6 +
.../qcom/talos-evk-lvds-auo,g133han01.dtso | 127 ++++
arch/arm64/boot/dts/qcom/talos-evk-som.dtsi | 610 ++++++++++++++++++
.../dts/qcom/talos-evk-usb1-peripheral.dtso | 27 +
arch/arm64/boot/dts/qcom/talos-evk.dts | 139 ++++
5 files changed, 909 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/talos-evk-lvds-auo,g133han01.dtso
create mode 100644 arch/arm64/boot/dts/qcom/talos-evk-som.dtsi
create mode 100644 arch/arm64/boot/dts/qcom/talos-evk-usb1-peripheral.dtso
create mode 100644 arch/arm64/boot/dts/qcom/talos-evk.dts
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index c46d94bb6dd5..b23042ea965c 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -382,6 +382,12 @@ dtb-$(CONFIG_ARCH_QCOM) += sm8650-mtp.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8650-qrd.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8750-mtp.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8750-qrd.dtb
+dtb-$(CONFIG_ARCH_QCOM) += talos-evk.dtb
+talos-evk-usb1-peripheral-dtbs := talos-evk.dtb talos-evk-usb1-peripheral.dtbo
+dtb-$(CONFIG_ARCH_QCOM) += talos-evk-usb1-peripheral.dtb
+talos-evk-lvds-auo,g133han01-dtbs := \
+ talos-evk.dtb talos-evk-lvds-auo,g133han01.dtbo
+dtb-$(CONFIG_ARCH_QCOM) += talos-evk-lvds-auo,g133han01.dtb
x1e001de-devkit-el2-dtbs := x1e001de-devkit.dtb x1-el2.dtbo
dtb-$(CONFIG_ARCH_QCOM) += x1e001de-devkit.dtb x1e001de-devkit-el2.dtb
x1e78100-lenovo-thinkpad-t14s-el2-dtbs := x1e78100-lenovo-thinkpad-t14s.dtb x1-el2.dtbo
diff --git a/arch/arm64/boot/dts/qcom/talos-evk-lvds-auo,g133han01.dtso b/arch/arm64/boot/dts/qcom/talos-evk-lvds-auo,g133han01.dtso
new file mode 100644
index 000000000000..8d16ce4a61d2
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/talos-evk-lvds-auo,g133han01.dtso
@@ -0,0 +1,127 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
+ */
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+&{/} {
+ backlight: backlight {
+ compatible = "gpio-backlight";
+ gpios = <&tlmm 115 GPIO_ACTIVE_HIGH>;
+ default-on;
+ };
+
+ panel-lvds {
+ compatible = "auo,g133han01";
+ power-supply = <&vreg_v3p3>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* LVDS A (Odd pixels) */
+ port@0 {
+ reg = <0>;
+ dual-lvds-odd-pixels;
+
+ lvds_panel_out_a: endpoint {
+ remote-endpoint = <&sn65dsi84_out_a>;
+ };
+ };
+
+ /* LVDS B (Even pixels) */
+ port@1 {
+ reg = <1>;
+ dual-lvds-even-pixels;
+
+ lvds_panel_out_b: endpoint {
+ remote-endpoint = <&sn65dsi84_out_b>;
+ };
+ };
+ };
+ };
+
+ vreg_v3p3: regulator-v3p3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+};
+
+&hdmi_connector {
+ status = "disabled";
+};
+
+&i2c1 {
+ clock-frequency = <400000>;
+ status = "okay";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hdmi_bridge: bridge@3d {
+ reg = <0x3d>;
+ status = "disabled";
+ };
+
+ lvds_bridge: bridge@2c {
+ compatible = "ti,sn65dsi84";
+ reg = <0x2c>;
+ enable-gpios = <&tlmm 42 GPIO_ACTIVE_HIGH>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ sn65dsi84_in: endpoint {
+ data-lanes = <1 2 3 4>;
+ remote-endpoint = <&mdss_dsi0_out>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ sn65dsi84_out_a: endpoint {
+ data-lanes = <1 2 3 4>;
+ remote-endpoint = <&lvds_panel_out_a>;
+ };
+ };
+
+ port@3 {
+ reg = <3>;
+
+ sn65dsi84_out_b: endpoint {
+ data-lanes = <1 2 3 4>;
+ remote-endpoint = <&lvds_panel_out_b>;
+ };
+ };
+ };
+ };
+};
+
+&mdss_dsi0 {
+ vdda-supply = <&vreg_l11a>;
+
+ status = "okay";
+};
+
+&mdss_dsi0_out {
+ remote-endpoint = <&sn65dsi84_in>;
+ data-lanes = <0 1 2 3>;
+};
+
+&tlmm {
+ lcd_bklt_en: lcd-bklt-en-state {
+ pins = "gpio115";
+ function = "gpio";
+ bias-disable;
+ };
+};
diff --git a/arch/arm64/boot/dts/qcom/talos-evk-som.dtsi b/arch/arm64/boot/dts/qcom/talos-evk-som.dtsi
new file mode 100644
index 000000000000..1720f175719a
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/talos-evk-som.dtsi
@@ -0,0 +1,610 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
+ */
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "talos.dtsi"
+#include "pm8150.dtsi"
+/ {
+ aliases {
+ i2c1 = &i2c1;
+ i2c5 = &i2c5;
+ mmc0 = &sdhc_1;
+ serial0 = &uart0;
+ serial1 = &uart7;
+ spi6 = &spi6;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ clocks {
+ can_osc: can-oscillator {
+ compatible = "fixed-clock";
+ clock-frequency = <20000000>;
+ #clock-cells = <0>;
+ };
+
+ sleep_clk: sleep-clk {
+ compatible = "fixed-clock";
+ clock-frequency = <32764>;
+ #clock-cells = <0>;
+ };
+
+ xo_board_clk: xo-board-clk {
+ compatible = "fixed-clock";
+ clock-frequency = <38400000>;
+ #clock-cells = <0>;
+ };
+ };
+
+ vreg_conn_1p8: regulator-conn-1p8 {
+ compatible = "regulator-fixed";
+ regulator-name = "vreg_conn_1p8";
+ startup-delay-us = <4000>;
+ enable-active-high;
+ gpio = <&pm8150_gpios 1 GPIO_ACTIVE_HIGH>;
+ };
+
+ vreg_conn_pa: regulator-conn-pa {
+ compatible = "regulator-fixed";
+ regulator-name = "vreg_conn_pa";
+ startup-delay-us = <4000>;
+ enable-active-high;
+ gpio = <&pm8150_gpios 6 GPIO_ACTIVE_HIGH>;
+ };
+
+ regulator-usb2-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "USB2_VBUS";
+ gpio = <&pm8150_gpios 10 GPIO_ACTIVE_HIGH>;
+ pinctrl-0 = <&usb2_en>;
+ pinctrl-names = "default";
+ enable-active-high;
+ regulator-always-on;
+ };
+
+ vreg_v3p3_can: regulator-v3p3-can {
+ compatible = "regulator-fixed";
+ regulator-name = "vreg-v3p3-can";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vreg_v5p0_can: regulator-v5p0-can {
+ compatible = "regulator-fixed";
+ regulator-name = "vreg-v5p0-can";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ wcn6855-pmu {
+ compatible = "qcom,wcn6855-pmu";
+
+ pinctrl-0 = <&bt_en_state>, <&wlan_en_state>;
+ pinctrl-names = "default";
+
+ bt-enable-gpios = <&tlmm 85 GPIO_ACTIVE_HIGH>;
+ wlan-enable-gpios = <&tlmm 84 GPIO_ACTIVE_HIGH>;
+
+ vddio-supply = <&vreg_conn_pa>;
+ vddaon-supply = <&vreg_s5a>;
+ vddpmu-supply = <&vreg_conn_1p8>;
+ vddpmumx-supply = <&vreg_conn_1p8>;
+ vddpmucx-supply = <&vreg_conn_pa>;
+ vddrfa0p95-supply = <&vreg_s5a>;
+ vddrfa1p3-supply = <&vreg_s6a>;
+ vddrfa1p9-supply = <&vreg_l15a>;
+ vddpcie1p3-supply = <&vreg_s6a>;
+ vddpcie1p9-supply = <&vreg_l15a>;
+
+ regulators {
+ vreg_pmu_rfa_cmn: ldo0 {
+ regulator-name = "vreg_pmu_rfa_cmn";
+ };
+
+ vreg_pmu_aon_0p59: ldo1 {
+ regulator-name = "vreg_pmu_aon_0p59";
+ };
+
+ vreg_pmu_wlcx_0p8: ldo2 {
+ regulator-name = "vreg_pmu_wlcx_0p8";
+ };
+
+ vreg_pmu_wlmx_0p85: ldo3 {
+ regulator-name = "vreg_pmu_wlmx_0p85";
+ };
+
+ vreg_pmu_btcmx_0p85: ldo4 {
+ regulator-name = "vreg_pmu_btcmx_0p85";
+ };
+
+ vreg_pmu_rfa_0p8: ldo5 {
+ regulator-name = "vreg_pmu_rfa_0p8";
+ };
+
+ vreg_pmu_rfa_1p2: ldo6 {
+ regulator-name = "vreg_pmu_rfa_1p2";
+ };
+
+ vreg_pmu_rfa_1p7: ldo7 {
+ regulator-name = "vreg_pmu_rfa_1p7";
+ };
+
+ vreg_pmu_pcie_0p9: ldo8 {
+ regulator-name = "vreg_pmu_pcie_0p9";
+ };
+
+ vreg_pmu_pcie_1p8: ldo9 {
+ regulator-name = "vreg_pmu_pcie_1p8";
+ };
+ };
+ };
+};
+
+&apps_rsc {
+ regulators-0 {
+ compatible = "qcom,pm8150-rpmh-regulators";
+ qcom,pmic-id = "a";
+
+ vreg_s3a: smps3 {
+ regulator-name = "vreg_s3a";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <650000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_s4a: smps4 {
+ regulator-name = "vreg_s4a";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1829000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_s5a: smps5 {
+ regulator-name = "vreg_s5a";
+ regulator-min-microvolt = <1896000>;
+ regulator-max-microvolt = <2040000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_s6a: smps6 {
+ regulator-name = "vreg_s6a";
+ regulator-min-microvolt = <1304000>;
+ regulator-max-microvolt = <1404000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l1a: ldo1 {
+ regulator-name = "vreg_l1a";
+ regulator-min-microvolt = <488000>;
+ regulator-max-microvolt = <852000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2a: ldo2 {
+ regulator-name = "vreg_l2a";
+ regulator-min-microvolt = <1650000>;
+ regulator-max-microvolt = <3100000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3a: ldo3 {
+ regulator-name = "vreg_l3a";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1248000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l5a: ldo5 {
+ regulator-name = "vreg_l5a";
+ regulator-min-microvolt = <875000>;
+ regulator-max-microvolt = <975000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l7a: ldo7 {
+ regulator-name = "vreg_l7a";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1900000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l8a: ldo8 {
+ regulator-name = "vreg_l8a";
+ regulator-min-microvolt = <1150000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l10a: ldo10 {
+ regulator-name = "vreg_l10a";
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <3312000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l11a: ldo11 {
+ regulator-name = "vreg_l11a";
+ regulator-min-microvolt = <1232000>;
+ regulator-max-microvolt = <1260000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l12a: ldo12 {
+ regulator-name = "vreg_l12a";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1890000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l13a: ldo13 {
+ regulator-name = "vreg_l13a";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3230000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l15a: ldo15 {
+ regulator-name = "vreg_l15a";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1904000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l16a: ldo16 {
+ regulator-name = "vreg_l16a";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3312000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l17a: ldo17 {
+ regulator-name = "vreg_l17a";
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <3312000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+};
+
+&gpi_dma0 {
+ status = "okay";
+};
+
+&gpi_dma1 {
+ status = "okay";
+};
+
+&i2c5 {
+ clock-frequency = <400000>;
+ status = "okay";
+
+ eeprom@57 {
+ compatible = "atmel,24c02";
+ reg = <0x57>;
+ pagesize = <16>;
+ };
+
+ eeprom@5f {
+ compatible = "atmel,24mac602";
+ reg = <0x5f>;
+ pagesize = <16>;
+ };
+};
+
+&mdss {
+ status = "okay";
+};
+
+&mdss_dp0 {
+ status = "okay";
+};
+
+&mdss_dp0_out {
+ link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000>;
+ remote-endpoint = <&dp0_connector_in>;
+};
+
+&mdss_dsi0 {
+ vdda-supply = <&vreg_l11a>;
+ status = "okay";
+};
+
+&mdss_dsi0_phy {
+ vcca-supply = <&vreg_l5a>;
+ status = "okay";
+};
+
+&pcie {
+ perst-gpios = <&tlmm 89 GPIO_ACTIVE_LOW>;
+ wake-gpios = <&tlmm 100 GPIO_ACTIVE_HIGH>;
+
+ pinctrl-0 = <&pcie_default_state>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&pcie_phy {
+ vdda-phy-supply = <&vreg_l5a>;
+ vdda-pll-supply = <&vreg_l12a>;
+
+ status = "okay";
+};
+
+&pcie_port0 {
+ wifi@0 {
+ compatible = "pci17cb,1103";
+ reg = <0x10000 0x0 0x0 0x0 0x0>;
+
+ qcom,calibration-variant = "QC_QCS615_Ride";
+
+ vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+ vddaon-supply = <&vreg_pmu_aon_0p59>;
+ vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+ vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
+ vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+ vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+ vddrfa1p8-supply = <&vreg_pmu_rfa_1p7>;
+ vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>;
+ vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>;
+ };
+};
+
+&pm8150_gpios {
+ usb2_en: usb2-en-state {
+ pins = "gpio10";
+ function = "normal";
+ output-enable;
+ power-source = <0>;
+ };
+};
+
+&qupv3_id_0 {
+ status = "okay";
+};
+
+&qupv3_id_1 {
+ status = "okay";
+};
+
+&remoteproc_adsp {
+ firmware-name = "qcom/qcs615/adsp.mbn";
+
+ status = "okay";
+};
+
+&remoteproc_cdsp {
+ firmware-name = "qcom/qcs615/cdsp.mbn";
+
+ status = "okay";
+};
+
+&sdhc_1 {
+ pinctrl-0 = <&sdc1_state_on>;
+ pinctrl-1 = <&sdc1_state_off>;
+ pinctrl-names = "default", "sleep";
+
+ bus-width = <8>;
+ mmc-ddr-1_8v;
+ mmc-hs200-1_8v;
+ mmc-hs400-1_8v;
+ mmc-hs400-enhanced-strobe;
+ vmmc-supply = <&vreg_l17a>;
+ vqmmc-supply = <&vreg_s4a>;
+
+ non-removable;
+ no-sd;
+ no-sdio;
+
+ status = "okay";
+};
+
+&spi6 {
+ status = "okay";
+
+ can@0 {
+ compatible = "microchip,mcp2515";
+ reg = <0>;
+ clocks = <&can_osc>;
+ interrupts-extended = <&tlmm 87 IRQ_TYPE_LEVEL_LOW>;
+ spi-max-frequency = <10000000>;
+ vdd-supply = <&vreg_v3p3_can>;
+ xceiver-supply = <&vreg_v5p0_can>;
+ };
+};
+
+&tlmm {
+ bt_en_state: bt-en-state {
+ pins = "gpio85";
+ function = "gpio";
+ bias-pull-down;
+ };
+
+ pcie_default_state: pcie-default-state {
+ clkreq-pins {
+ pins = "gpio90";
+ function = "pcie_clk_req";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ perst-pins {
+ pins = "gpio89";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ wake-pins {
+ pins = "gpio100";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ wifi_reg_en_pins_state: wifi-reg-en-pins-state {
+ pins = "gpio91";
+ function = "gpio";
+ drive-strength = <8>;
+ output-high;
+ bias-pull-up;
+ };
+
+ wlan_en_state: wlan-en-state {
+ pins = "gpio84";
+ function = "gpio";
+ drive-strength = <16>;
+ bias-pull-up;
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&uart7 {
+ status = "okay";
+
+ bluetooth {
+ compatible = "qcom,wcn6855-bt";
+ firmware-name = "QCA6698/hpnv21", "QCA6698/hpbtfw21.tlv";
+
+ vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+ vddaon-supply = <&vreg_pmu_aon_0p59>;
+ vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+ vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
+ vddbtcmx-supply = <&vreg_pmu_btcmx_0p85>;
+ vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+ vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+ vddrfa1p8-supply = <&vreg_pmu_rfa_1p7>;
+ };
+};
+
+/*
+ * USB0 routing and EDL mode:
+ *
+ * The USB0 controller’s HS differential pair is switched (manually)
+ * between the Micro-USB port for EDL/ADB and the on-board USB 3.0 hub.
+ *
+ * During EDL (Emergency Download) mode, the HS lines are explicitly
+ * routed to the Micro-USB port to allow the SoC to enter device mode
+ * for flashing.
+ *
+ * After EDL the switch is normally toggled so the HS lines stay
+ * connected to the hub’s Type-A downstream ports, leaving no electrical
+ * path to the Micro-USB connector — therefore USB0 runs host-only in
+ * normal runtime and device mode must not be advertised.
+ *
+ * USB0 is configured host-only in the base device tree; a separate
+ * device-tree overlay enables the Micro-USB peripheral configuration for
+ * ADB. For ADB to work during normal runtime the DIP switch SW1 must be
+ * manually toggled to the off position (reconnecting the HS pair to the
+ * Micro-USB port).
+ */
+
+&usb_1 {
+ dr_mode = "host";
+
+ status = "okay";
+};
+
+&usb_1_hsphy {
+ vdd-supply = <&vreg_l5a>;
+ vdda-pll-supply = <&vreg_l12a>;
+ vdda-phy-dpdm-supply = <&vreg_l13a>;
+
+ status = "okay";
+};
+
+&usb_2 {
+ dr_mode = "host";
+
+ status = "okay";
+};
+
+&usb_2_hsphy {
+ vdd-supply = <&vreg_l5a>;
+ vdda-pll-supply = <&vreg_l12a>;
+ vdda-phy-dpdm-supply = <&vreg_l13a>;
+
+ status = "okay";
+};
+
+&usb_qmpphy {
+ vdda-phy-supply = <&vreg_l5a>;
+ vdda-pll-supply = <&vreg_l12a>;
+
+ status = "okay";
+};
+
+&usb_qmpphy_2 {
+ vdda-phy-supply = <&vreg_l11a>;
+ vdda-pll-supply = <&vreg_l5a>;
+
+ status = "okay";
+};
+
+&ufs_mem_hc {
+ reset-gpios = <&tlmm 123 GPIO_ACTIVE_LOW>;
+ vcc-supply = <&vreg_l17a>;
+ vcc-max-microamp = <600000>;
+ vccq2-supply = <&vreg_s4a>;
+ vccq2-max-microamp = <600000>;
+
+ status = "okay";
+};
+
+&ufs_mem_phy {
+ vdda-phy-supply = <&vreg_l5a>;
+ vdda-pll-supply = <&vreg_l12a>;
+
+ status = "okay";
+};
+
+&venus {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/talos-evk-usb1-peripheral.dtso b/arch/arm64/boot/dts/qcom/talos-evk-usb1-peripheral.dtso
new file mode 100644
index 000000000000..7552ecf9d7ee
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/talos-evk-usb1-peripheral.dtso
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
+ */
+/dts-v1/;
+/plugin/;
+
+/*
+ * USB0 Peripheral Mode Overlay
+ *
+ * This overlay switches USB0 from host mode to peripheral mode
+ * by configuring the USB controller node.
+ *
+ * Hardware requirement:
+ * The DIP switch SW1 must be toggled to reconnect the USB0 HS
+ * differential pair to the Micro-USB connector instead of the
+ * on-board USB 3.0 hub.
+ *
+ * Without toggling SW1, there is no electrical path to the
+ * Micro-USB connector and device mode will not function.
+ */
+
+&usb_1 {
+ dr_mode = "peripheral";
+
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/talos-evk.dts b/arch/arm64/boot/dts/qcom/talos-evk.dts
new file mode 100644
index 000000000000..af100e22beee
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/talos-evk.dts
@@ -0,0 +1,139 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
+ */
+/dts-v1/;
+
+#include "talos-evk-som.dtsi"
+
+/ {
+ model = "Qualcomm QCS615 IQ 615 EVK";
+ compatible = "qcom,talos-evk", "qcom,qcs615", "qcom,sm6150";
+ chassis-type = "embedded";
+
+ aliases {
+ mmc1 = &sdhc_2;
+ };
+
+ dp0-connector {
+ compatible = "dp-connector";
+ label = "DP0";
+ type = "full-size";
+
+ hpd-gpios = <&tlmm 104 GPIO_ACTIVE_HIGH>;
+
+ port {
+ dp0_connector_in: endpoint {
+ remote-endpoint = <&mdss_dp0_out>;
+ };
+ };
+ };
+
+ hdmi_connector: hdmi-out {
+ compatible = "hdmi-connector";
+ type = "d";
+
+ port {
+ hdmi_con_out: endpoint {
+ remote-endpoint = <&adv7535_out>;
+ };
+ };
+ };
+
+ vreg_v1p8_out: regulator-v1p8-out {
+ compatible = "regulator-fixed";
+ regulator-name = "vreg-v1p8-out";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vreg_v5p0_out>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vreg_v3p3_out: regulator-v3p3-out {
+ compatible = "regulator-fixed";
+ regulator-name = "vreg-v3p3-out";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vreg_v5p0_out>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vreg_v5p0_out: regulator-v5p0-out {
+ compatible = "regulator-fixed";
+ regulator-name = "vreg-v5p0-out";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ /* Powered by system 20V rail (USBC_VBUS_IN) */
+ };
+};
+
+&i2c1 {
+ clock-frequency = <400000>;
+ status = "okay";
+
+ hdmi_bridge: bridge@3d {
+ compatible = "adi,adv7535";
+ reg = <0x3d>;
+ avdd-supply = <&vreg_v1p8_out>;
+ dvdd-supply = <&vreg_v1p8_out>;
+ pvdd-supply = <&vreg_v1p8_out>;
+ a2vdd-supply = <&vreg_v1p8_out>;
+ v3p3-supply = <&vreg_v3p3_out>;
+ interrupts-extended = <&tlmm 26 IRQ_TYPE_LEVEL_LOW>;
+ adi,dsi-lanes = <4>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ adv7535_in: endpoint {
+ remote-endpoint = <&mdss_dsi0_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ adv7535_out: endpoint {
+ remote-endpoint = <&hdmi_con_out>;
+ };
+ };
+ };
+ };
+};
+
+&mdss_dsi0_out {
+ remote-endpoint = <&adv7535_in>;
+ data-lanes = <0 1 2 3>;
+};
+
+&pon_pwrkey {
+ status = "okay";
+};
+
+&pon_resin {
+ linux,code = <KEY_VOLUMEDOWN>;
+
+ status = "okay";
+};
+
+&sdhc_2 {
+ pinctrl-0 = <&sdc2_state_on>;
+ pinctrl-1 = <&sdc2_state_off>;
+ pinctrl-names = "default", "sleep";
+
+ bus-width = <4>;
+ cd-gpios = <&tlmm 99 GPIO_ACTIVE_LOW>;
+
+ vmmc-supply = <&vreg_l10a>;
+ vqmmc-supply = <&vreg_s4a>;
+
+ status = "okay";
+};
--
2.34.1
^ permalink raw reply related
* [PATCH v16 2/3] arm64: dts: qcom: talos/qcs615-ride: Fix inconsistent USB PHY node naming
From: Sudarshan Shetty @ 2026-03-31 6:01 UTC (permalink / raw)
To: andersson, konradybcio
Cc: robh, krzk+dt, conor+dt, linux-arm-msm, devicetree, linux-kernel,
Sudarshan Shetty, Dmitry Baryshkov
In-Reply-To: <20260331060107.501561-1-tessolveupstream@gmail.com>
The USB PHY nodes has inconsistent labels as 'usb_1_hsphy'
and 'usb_hsphy_2' across talos.dtsi and qcs615-ride.dts.
This patch renames them to follow a consistent naming
scheme.
No functional changes, only label renaming.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Sudarshan Shetty <tessolveupstream@gmail.com>
---
arch/arm64/boot/dts/qcom/qcs615-ride.dts | 2 +-
arch/arm64/boot/dts/qcom/talos.dtsi | 4 ++--
2 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/qcs615-ride.dts b/arch/arm64/boot/dts/qcom/qcs615-ride.dts
index 5064ca4f1158..9f6cc31f1fc7 100644
--- a/arch/arm64/boot/dts/qcom/qcs615-ride.dts
+++ b/arch/arm64/boot/dts/qcom/qcs615-ride.dts
@@ -634,7 +634,7 @@ &usb_1 {
status = "okay";
};
-&usb_hsphy_2 {
+&usb_2_hsphy {
vdd-supply = <&vreg_l5a>;
vdda-pll-supply = <&vreg_l12a>;
vdda-phy-dpdm-supply = <&vreg_l13a>;
diff --git a/arch/arm64/boot/dts/qcom/talos.dtsi b/arch/arm64/boot/dts/qcom/talos.dtsi
index 9be1e523e9ce..32b7346f4548 100644
--- a/arch/arm64/boot/dts/qcom/talos.dtsi
+++ b/arch/arm64/boot/dts/qcom/talos.dtsi
@@ -4447,7 +4447,7 @@ usb_1_hsphy: phy@88e2000 {
status = "disabled";
};
- usb_hsphy_2: phy@88e3000 {
+ usb_2_hsphy: phy@88e3000 {
compatible = "qcom,qcs615-qusb2-phy";
reg = <0x0 0x088e3000 0x0 0x180>;
@@ -4608,7 +4608,7 @@ usb_2: usb@a800000 {
iommus = <&apps_smmu 0xe0 0x0>;
- phys = <&usb_hsphy_2>;
+ phys = <&usb_2_hsphy>;
phy-names = "usb2-phy";
power-domains = <&gcc USB20_SEC_GDSC>;
--
2.34.1
^ permalink raw reply related
* [PATCH v16 1/3] dt-bindings: arm: qcom: talos-evk: Add QCS615 Talos EVK SMARC platform
From: Sudarshan Shetty @ 2026-03-31 6:01 UTC (permalink / raw)
To: andersson, konradybcio
Cc: robh, krzk+dt, conor+dt, linux-arm-msm, devicetree, linux-kernel,
Sudarshan Shetty, Krzysztof Kozlowski
In-Reply-To: <20260331060107.501561-1-tessolveupstream@gmail.com>
Add binding support for the Qualcomm Technologies, Inc. Talos EVK
SMARC platform based on the QCS615 SoC.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sudarshan Shetty <tessolveupstream@gmail.com>
---
Documentation/devicetree/bindings/arm/qcom.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml
index ca880c105f3b..9e68402cb5dc 100644
--- a/Documentation/devicetree/bindings/arm/qcom.yaml
+++ b/Documentation/devicetree/bindings/arm/qcom.yaml
@@ -924,6 +924,7 @@ properties:
- items:
- enum:
- qcom,qcs615-ride
+ - qcom,talos-evk
- const: qcom,qcs615
- const: qcom,sm6150
--
2.34.1
^ permalink raw reply related
* [PATCH v16 0/3] Add Qualcomm Technologies, Inc. Talos EVK SMARC support
From: Sudarshan Shetty @ 2026-03-31 6:01 UTC (permalink / raw)
To: andersson, konradybcio
Cc: robh, krzk+dt, conor+dt, linux-arm-msm, devicetree, linux-kernel,
Sudarshan Shetty
Hi all,
This patch series adds device tree binding and board support for the
Qualcomm Technologies, Inc. Talos EVK SMARC platform based on the
QCS615 SoC.
The first patch introduces the DT binding entry for the Talos EVK
SMARC board, and the next patches adds the corresponding DTS
files for the platform.
Note:
USB0(usb_1) supports host-only mode based on the switch SW1 on
the SoM, which is purely a hardware controlled as USB-ID and USB-VBUS
is not connected and switching cannot be handled from SW.
USB0 is configured host-only in the base device tree, hence host-only
mode is supported on Linux boot up.
For ADB to work during normal runtime, a separate device-tree overlay
enables the Micro-USB peripheral configuration.
Changes in v16:
- Reordered device tree nodes.
- Added explanatory comments in talos-evk-usb1-peripheral.dtso.
- This patch series depends on the below url
https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/?h=next-20260330&id=c1e77b13457d20f14c70e623f7c0a6a3cefc1d67
- No functional change in bindings file.
Changes in v15:
- Simplified LVDS backlight implementation to use gpio-backlight with
GPIO115 only.
- Removed previously added extra GPIO(GPIO59) and related gpio-
backlight driver changes.
- Added #address-cells and #size-cells in &i2c1 to fix dtc warnings.
- Added missing reg property for bridge@3d to fix dtc warnings.
- This patch series depends on the below url
https://lore.kernel.org/linux-arm-msm/e025b1b4-8f5c-4fd2-853e-56b89f1f8e79@oss.qualcomm.com/
- Updated commit messages.
- No functional change in bindings file.
Changes in v14:
- Added DT aliases for i2c1, i2c5, and spi6.
- Dropped unrelated talos.dtsi and qcs615-ride.dtsi modifications
(handled in separate patches).
- Updated commit messages.
- Updated USB note in the cover letter for maintainers' awareness.
- Ignore v13 patch.
Changes in v13:
- The USB HS PHY node naming has been corrected to follow the
existing convention used across the tree (usb_x_hsphy instead of
usb_hsphy_x). (suggested by Konrad)
- Removed unnecessary output-low from the wlan_en_state node.
- Updated WiFi DT to control PA power through WLAN_EN, removing
separate regulator definitions.
- Added USB peripheral overlay allowing USB0 to operate in device
mode when required. (suggested by Dmitry)
- Updated commit messages.
- No functional change in bindings file.
Changes in v12:
- qcs615-ride.dts patch squashed with talos.dtsi patch.
(suggested by Konrad)
- Added static power supply node for lvds-panel.
- The ti,dsi-lanes, ti,lvds-format, and ti,lvds-bpp properties
dropped because they were redundant for the current
panel/bridge configuration.
- No functional change in bindings file.
Changes in v11:
- Fixed inconsistent USB PHY node naming in qcs615-ride.dts to
align with the expected naming convention. (suggested by
yuanjiey)
- Reordered properties in property-n and property-names for
consistency across DT files.
- Removed unnecessary output-low from the bt_en_state node.
- Used a &label_reference for hdmi_connector.
- Added pcieport0 device node, which is required for WLAN to
power on.
- No functional change in bindings file.
Changes in v10:
- This series extends the gpio-backlight driver and its DT bindings
to support multiple control GPIOs. (suggested by Dmitry)
- Addressed DT node labeling feedback.
- Polished overall device tree structure and minor formattings.
- Corrected pinctrl configuration for the active-low PERST# pin.
- Includes a fix for inconsistent USB PHY node naming in
talos.dtsi. (suggested by Dmitry)
- Enabled WiFi and Bluetooth functionality.
- Updated commit message.
- No functional change in bindings file.
Changes in v9:
- The updates in the following patch url is taken care in this
patch series.
https://lists.freedesktop.org/archives/dri-devel/2025-November/534473.html
- Ignore v8 patch
Changes in v8:
- This patch series depends on the below url
https://lists.freedesktop.org/archives/dri-devel/2025-November/534473.html
- Moved the contents of `talos-evk-cb.dtsi` to `talos-evk.dtsi`
which will describe all the standard configuration of the EVK.
- Introduced 'talos-evk-lvds-auo,g133han01.dtso' which has overlay
to disable HDMI and adds the LVDS-related on top of the base
dts file. (suggested by Bjorn)
- Ethernet and Wi-Fi/BT are not (yet) supported.
- Updated commit message.
- No functional change in bindings file.
Changes in v7:
- Added i2c clock frequency for i2c5 node.
- Moved adv7535 controller section to talos-evk.dts file.
- Reorder the usb nodes.
- GPI_DMA nodes added in the device tree files.
- No functional change in bindings file.
Changes in v6:
- Clarified description of `talos-evk-cb.dtsi` to explain that it
defines common carrier board interfaces shared between HDMI and
LVDS variants, And It’s a single carrier board. HDMI and LVDS
share the same DSI interface, and only one can be active at a
time depending on a DIP switch.
- Added missing newlines before 'status' and between the last property
and subnode (suggested by Konrad).
- Updated commit messages for clarity.
Changes in v5:
- Updated commit message. (suggested by Krzysztof)
- Introduced generic node name for can, dp, hdmi-bridge. (suggested by
Krzysztof)
- Introduced talos-evk-cb.dtsi, which has common carrier board
interfaces.
- No functional change in bindings file.
Changes in v4:
- Updated product name to full form per Krzysztof’s feedback in
dt-binding comment.
- Hook up the ADV7535 DSI-to-HDMI bridge to base DTS file.
- Add DP connector node and MDSS DisplayPort controller.
- Added USB note in the cover letter for maintainers' awareness.
Changes in v3:
- Addressed comments from Dmitry regarding USB1 `dr_mode` and
added a DTS comment.
- No functional change in bindings file.
Changes in v2:
- Renamed compatible to "qcom,talos-evk" (suggested by Dmitry/Bjorn)
- Merged enum entry with existing `qcs615-ride` block (Krzysztof)
- Fixed subject and commit message to use imperative mood.
Thanks,
Anusha
Sudarshan Shetty (3):
dt-bindings: arm: qcom: talos-evk: Add QCS615 Talos EVK SMARC platform
arm64: dts: qcom: talos/qcs615-ride: Fix inconsistent USB PHY node
naming
arm64: dts: qcom: talos-evk: Add support for QCS615 talos evk board
.../devicetree/bindings/arm/qcom.yaml | 1 +
arch/arm64/boot/dts/qcom/Makefile | 6 +
arch/arm64/boot/dts/qcom/qcs615-ride.dts | 2 +-
.../qcom/talos-evk-lvds-auo,g133han01.dtso | 127 ++++
arch/arm64/boot/dts/qcom/talos-evk-som.dtsi | 610 ++++++++++++++++++
.../dts/qcom/talos-evk-usb1-peripheral.dtso | 27 +
arch/arm64/boot/dts/qcom/talos-evk.dts | 139 ++++
arch/arm64/boot/dts/qcom/talos.dtsi | 4 +-
8 files changed, 913 insertions(+), 3 deletions(-)
create mode 100644 arch/arm64/boot/dts/qcom/talos-evk-lvds-auo,g133han01.dtso
create mode 100644 arch/arm64/boot/dts/qcom/talos-evk-som.dtsi
create mode 100644 arch/arm64/boot/dts/qcom/talos-evk-usb1-peripheral.dtso
create mode 100644 arch/arm64/boot/dts/qcom/talos-evk.dts
--
2.34.1
^ permalink raw reply
* Re: [PATCH RFC 08/19] RISC-V: QoS: add resctrl interface for CBQRI controllers
From: Drew Fustini @ 2026-03-31 5:57 UTC (permalink / raw)
To: guo.wenjia23
Cc: dave.martin, acpica-devel, alex, aou, aricciardi, atish.patra,
atishp, babu.moger, ben.horgan, conor+dt, cp0613, cuiyunhui,
devicetree, fenghua.yu, james.morse, krzk+dt, lenb, linux-acpi,
linux-kernel, linux-riscv, liu.qingtao2, liwei1518, mindal,
npitre, palmer, paul.walmsley, peternewman, pjw, rafael,
reinette.chatre, rkrcmar, robert.moore, robh, samuel.holland,
sunilvl, tony.luck, vasu, ved, x86, zhiwei_liu
In-Reply-To: <202603261113.62QBDn8T007047@mse-db.zte.com.cn>
On Thu, Mar 26, 2026 at 07:05:48PM +0800, guo.wenjia23@zte.com.cn wrote:
> Hi Drew,
>
> On Thu, Jan 29, 2026 at 4:28 AM Drew Fustini <fustini@kernel.org> wrote:>
> > Add interface for CBQRI controller drivers to make use of the resctrl
> > filesystem.
> >
> > Co-developed-by: Adrien Ricciardi <aricciardi@baylibre.com>
> > Signed-off-by: Adrien Ricciardi <aricciardi@baylibre.com>
> > Signed-off-by: Drew Fustini <fustini@kernel.org>
> > ---
> > arch/riscv/kernel/qos/qos_resctrl.c | 1192 +++++++++++++++++++++++++++++++++++
> > 1 file changed, 1192 insertions(+)
> >
> > ...
> >
> > +
> > +int resctrl_arch_update_one(struct rdt_resource *r, struct rdt_ctrl_domain *d,
> > + u32 closid, enum resctrl_conf_type t, u32 cfg_val)
> > +{
> > + struct cbqri_controller *ctrl;
> > + struct cbqri_resctrl_dom *dom;
> > + struct cbqri_config cfg;
> > + int err = 0;
> > +
> > + dom = container_of(d, struct cbqri_resctrl_dom, resctrl_ctrl_dom);
> > + ctrl = dom->hw_ctrl;
> > +
> > + if (!r->alloc_capable)
> > + return -EINVAL;
> > +
> > + switch (r->rid) {
> > + case RDT_RESOURCE_L2:
> > + case RDT_RESOURCE_L3:
> > + cfg.cbm = cfg_val;
> > + err = cbqri_apply_cache_config(dom, closid, t, &cfg);
> > + break;
> > + case RDT_RESOURCE_MBA:
> > + /* covert from percentage to bandwidth blocks */
> > + cfg.rbwb = cfg_val * ctrl->bc.nbwblks / 100;
>
> Should use bc.mrbwb to calculate rbwb?
> I think bc.nbwblks represent the available bw blks in the controller.
> It should should decrease as they are allocated.
The resctrl MBA resource is supposed to be the percentage of total
memory bandwidth. nbwblks is the total number of bandwidth blocks, so I
think the existing calucation is correct.
From the example SoC configuration, the number of bandwidth blocks is
1024, and mrbwb is meant to be 80% of nbwblks which is 819.
Setting MB to 80% in schemata would yield: 80 * 1024 / 100 = 819
Thanks,
Drew
^ permalink raw reply
* [PATCH v3 7/7] arm64: defconfig: Enable VIDEOCC and CAMCC drivers on Qualcomm X1P42100
From: Jagadeesh Kona @ 2026-03-31 5:24 UTC (permalink / raw)
To: Bjorn Andersson, Michael Turquette, Stephen Boyd, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Jagadeesh Kona,
Bryan O'Donoghue, Konrad Dybcio
Cc: Ajit Pandey, Imran Shaik, Taniya Das, linux-arm-msm, linux-clk,
devicetree, linux-kernel, Jagadeesh Kona, Krzysztof Kozlowski
In-Reply-To: <20260331-purwa-videocc-camcc-v3-0-6daca180a4b1@oss.qualcomm.com>
Enable video and camera clock controller drivers for their respective
functionalities on Qualcomm X1P42100-CRD and similar other platforms
with Snapdragon X1P42100 SoC.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Jagadeesh Kona <jagadeesh.kona@oss.qualcomm.com>
---
arch/arm64/configs/defconfig | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index e44e83bc57812aaed21bff1b12d36ae4a373ce11..44dc5da9805ef01b30c39ad2235f9d294515b360 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -1492,7 +1492,9 @@ CONFIG_CLK_X1E80100_DISPCC=m
CONFIG_CLK_X1E80100_GCC=y
CONFIG_CLK_X1E80100_GPUCC=m
CONFIG_CLK_X1E80100_TCSRCC=y
+CONFIG_CLK_X1P42100_CAMCC=m
CONFIG_CLK_X1P42100_GPUCC=m
+CONFIG_CLK_X1P42100_VIDEOCC=m
CONFIG_CLK_QCM2290_GPUCC=m
CONFIG_QCOM_A53PLL=y
CONFIG_QCOM_CLK_APCS_MSM8916=y
--
2.34.1
^ permalink raw reply related
* [PATCH v3 6/7] arm64: dts: qcom: x1e80100: Add CAMCC block definition
From: Jagadeesh Kona @ 2026-03-31 5:24 UTC (permalink / raw)
To: Bjorn Andersson, Michael Turquette, Stephen Boyd, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Jagadeesh Kona,
Bryan O'Donoghue, Konrad Dybcio
Cc: Ajit Pandey, Imran Shaik, Taniya Das, linux-arm-msm, linux-clk,
devicetree, linux-kernel, Jagadeesh Kona, Vladimir Zapolskiy,
Konrad Dybcio, Abel Vesa
In-Reply-To: <20260331-purwa-videocc-camcc-v3-0-6daca180a4b1@oss.qualcomm.com>
From: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Add the CAMCC block for x1e80100. The x1e80100 CAMCC block is an iteration
of previous CAMCC blocks with the exception of having two required
power-domains not just one. And update the compatible for camcc and
videocc nodes on Purwa to match with their respective Purwa (X1P42100)
specific drivers.
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Jagadeesh Kona <jagadeesh.kona@oss.qualcomm.com>
---
arch/arm64/boot/dts/qcom/hamoa.dtsi | 16 ++++++++++++++++
arch/arm64/boot/dts/qcom/purwa.dtsi | 10 ++++++++++
2 files changed, 26 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/hamoa.dtsi b/arch/arm64/boot/dts/qcom/hamoa.dtsi
index 051dee0764167338023c96342d895f2871a61c59..12d17ae6da6615876eb698cd7b677940eb1731c9 100644
--- a/arch/arm64/boot/dts/qcom/hamoa.dtsi
+++ b/arch/arm64/boot/dts/qcom/hamoa.dtsi
@@ -5550,6 +5550,22 @@ videocc: clock-controller@aaf0000 {
#power-domain-cells = <1>;
};
+ camcc: clock-controller@ade0000 {
+ compatible = "qcom,x1e80100-camcc";
+ reg = <0 0x0ade0000 0 0x20000>;
+ clocks = <&gcc GCC_CAMERA_AHB_CLK>,
+ <&bi_tcxo_div2>,
+ <&bi_tcxo_ao_div2>,
+ <&sleep_clk>;
+ power-domains = <&rpmhpd RPMHPD_MXC>,
+ <&rpmhpd RPMHPD_MMCX>;
+ required-opps = <&rpmhpd_opp_low_svs>,
+ <&rpmhpd_opp_low_svs>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ };
+
mdss: display-subsystem@ae00000 {
compatible = "qcom,x1e80100-mdss";
reg = <0 0x0ae00000 0 0x1000>;
diff --git a/arch/arm64/boot/dts/qcom/purwa.dtsi b/arch/arm64/boot/dts/qcom/purwa.dtsi
index 9ab4f26b35f298ad7c6c361b3e232edf07baf223..ea65b8448836ead83f837e973ed536e8ea0ed8ef 100644
--- a/arch/arm64/boot/dts/qcom/purwa.dtsi
+++ b/arch/arm64/boot/dts/qcom/purwa.dtsi
@@ -6,6 +6,8 @@
/* X1P42100 is heavily based on hamoa, with some meaningful differences */
#include "hamoa.dtsi"
+#include <dt-bindings/clock/qcom,x1p42100-videocc.h>
+
/delete-node/ &bwmon_cluster0;
/delete-node/ &cluster_pd2;
/delete-node/ &cpu_map_cluster2;
@@ -36,10 +38,18 @@
/delete-node/ &thermal_gpuss_6;
/delete-node/ &thermal_gpuss_7;
+&camcc {
+ compatible = "qcom,x1p42100-camcc";
+};
+
&gcc {
compatible = "qcom,x1p42100-gcc", "qcom,x1e80100-gcc";
};
+&videocc {
+ compatible = "qcom,x1p42100-videocc";
+};
+
&gmu {
compatible = "qcom,adreno-gmu-x145.0", "qcom,adreno-gmu";
};
--
2.34.1
^ permalink raw reply related
* [PATCH v3 5/7] clk: qcom: camcc-x1p42100: Add support for camera clock controller
From: Jagadeesh Kona @ 2026-03-31 5:24 UTC (permalink / raw)
To: Bjorn Andersson, Michael Turquette, Stephen Boyd, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Jagadeesh Kona,
Bryan O'Donoghue, Konrad Dybcio
Cc: Ajit Pandey, Imran Shaik, Taniya Das, linux-arm-msm, linux-clk,
devicetree, linux-kernel, Jagadeesh Kona, Konrad Dybcio
In-Reply-To: <20260331-purwa-videocc-camcc-v3-0-6daca180a4b1@oss.qualcomm.com>
Add support for the camera clock controller for camera clients to
be able to request for camcc clocks on X1P42100 platform. Although
X1P42100 is derived from X1E80100, the camera clock controller driver
differs significantly. Few PLLs, clocks and GDSC's are removed, there
is delta in frequency tables for most RCG's and parent data structures
also changed for few RCG's. Hence introduce a separate camcc driver
for X1P42100 platform.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Taniya Das <taniya.das@oss.qualcomm.com>
Signed-off-by: Jagadeesh Kona <jagadeesh.kona@oss.qualcomm.com>
---
drivers/clk/qcom/Kconfig | 10 +
drivers/clk/qcom/Makefile | 1 +
drivers/clk/qcom/camcc-x1p42100.c | 2223 +++++++++++++++++++++++++++++++++++++
3 files changed, 2234 insertions(+)
diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
index 920d5e78e57d1ac62b59eb1c39d1f79c0718abb8..01778a82ffa294fe3f3e2d0a8101a4af04a355f0 100644
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
@@ -190,6 +190,16 @@ config CLK_X1E80100_TCSRCC
Support for the TCSR clock controller on X1E80100 devices.
Say Y if you want to use peripheral devices such as SD/UFS.
+config CLK_X1P42100_CAMCC
+ tristate "X1P42100 Camera Clock Controller"
+ depends on ARM64 || COMPILE_TEST
+ select CLK_X1E80100_GCC
+ help
+ Support for the camera clock controller on Qualcomm Technologies, Inc.
+ X1P42100 devices.
+ Say Y if you want to support camera devices and camera functionality
+ such as capturing pictures.
+
config CLK_X1P42100_GPUCC
tristate "X1P42100 Graphics Clock Controller"
depends on ARM64 || COMPILE_TEST
diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
index ae1f3207a20be4c9163a6f7ce9f309f36e80fc6f..93a617580b10d6314f34d54d08ae107c1437d973 100644
--- a/drivers/clk/qcom/Makefile
+++ b/drivers/clk/qcom/Makefile
@@ -40,6 +40,7 @@ obj-$(CONFIG_CLK_X1E80100_DISPCC) += dispcc-x1e80100.o
obj-$(CONFIG_CLK_X1E80100_GCC) += gcc-x1e80100.o
obj-$(CONFIG_CLK_X1E80100_GPUCC) += gpucc-x1e80100.o
obj-$(CONFIG_CLK_X1E80100_TCSRCC) += tcsrcc-x1e80100.o
+obj-$(CONFIG_CLK_X1P42100_CAMCC) += camcc-x1p42100.o
obj-$(CONFIG_CLK_X1P42100_GPUCC) += gpucc-x1p42100.o
obj-$(CONFIG_CLK_X1P42100_VIDEOCC) += videocc-x1p42100.o
obj-$(CONFIG_CLK_QCM2290_GPUCC) += gpucc-qcm2290.o
diff --git a/drivers/clk/qcom/camcc-x1p42100.c b/drivers/clk/qcom/camcc-x1p42100.c
new file mode 100644
index 0000000000000000000000000000000000000000..c1a61c267919976d2d869fef4cd3659433ad2993
--- /dev/null
+++ b/drivers/clk/qcom/camcc-x1p42100.c
@@ -0,0 +1,2223 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#include <dt-bindings/clock/qcom,x1e80100-camcc.h>
+
+#include "clk-alpha-pll.h"
+#include "clk-branch.h"
+#include "clk-rcg.h"
+#include "clk-regmap.h"
+#include "common.h"
+#include "gdsc.h"
+#include "reset.h"
+
+enum {
+ DT_IFACE,
+ DT_BI_TCXO,
+ DT_BI_TCXO_AO,
+ DT_SLEEP_CLK,
+};
+
+enum {
+ P_BI_TCXO,
+ P_BI_TCXO_AO,
+ P_CAM_CC_PLL0_OUT_EVEN,
+ P_CAM_CC_PLL0_OUT_MAIN,
+ P_CAM_CC_PLL0_OUT_ODD,
+ P_CAM_CC_PLL1_OUT_EVEN,
+ P_CAM_CC_PLL2_OUT_EVEN,
+ P_CAM_CC_PLL2_OUT_MAIN,
+ P_CAM_CC_PLL3_OUT_EVEN,
+ P_CAM_CC_PLL6_OUT_EVEN,
+ P_SLEEP_CLK,
+};
+
+static const struct pll_vco lucid_ole_vco[] = {
+ { 249600000, 2300000000, 0 },
+};
+
+static const struct pll_vco rivian_ole_vco[] = {
+ { 777000000, 1285000000, 0 },
+};
+
+/* 1200.0 MHz Configuration */
+static const struct alpha_pll_config cam_cc_pll0_config = {
+ .l = 0x3e,
+ .alpha = 0x8000,
+ .config_ctl_val = 0x20485699,
+ .config_ctl_hi_val = 0x00182261,
+ .config_ctl_hi1_val = 0x82aa299c,
+ .test_ctl_val = 0x00000000,
+ .test_ctl_hi_val = 0x00000003,
+ .test_ctl_hi1_val = 0x00009000,
+ .test_ctl_hi2_val = 0x00000034,
+ .user_ctl_val = 0x00008400,
+ .user_ctl_hi_val = 0x00000005,
+};
+
+static struct clk_alpha_pll cam_cc_pll0 = {
+ .offset = 0x0,
+ .config = &cam_cc_pll0_config,
+ .vco_table = lucid_ole_vco,
+ .num_vco = ARRAY_SIZE(lucid_ole_vco),
+ .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_LUCID_OLE],
+ .clkr = {
+ .hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_pll0",
+ .parent_data = &(const struct clk_parent_data) {
+ .index = DT_BI_TCXO,
+ },
+ .num_parents = 1,
+ .ops = &clk_alpha_pll_lucid_evo_ops,
+ },
+ },
+};
+
+static const struct clk_div_table post_div_table_cam_cc_pll0_out_even[] = {
+ { 0x1, 2 },
+ { }
+};
+
+static struct clk_alpha_pll_postdiv cam_cc_pll0_out_even = {
+ .offset = 0x0,
+ .post_div_shift = 10,
+ .post_div_table = post_div_table_cam_cc_pll0_out_even,
+ .num_post_div = ARRAY_SIZE(post_div_table_cam_cc_pll0_out_even),
+ .width = 4,
+ .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_LUCID_OLE],
+ .clkr.hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_pll0_out_even",
+ .parent_hws = (const struct clk_hw*[]) {
+ &cam_cc_pll0.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_alpha_pll_postdiv_lucid_ole_ops,
+ },
+};
+
+static const struct clk_div_table post_div_table_cam_cc_pll0_out_odd[] = {
+ { 0x2, 3 },
+ { }
+};
+
+static struct clk_alpha_pll_postdiv cam_cc_pll0_out_odd = {
+ .offset = 0x0,
+ .post_div_shift = 14,
+ .post_div_table = post_div_table_cam_cc_pll0_out_odd,
+ .num_post_div = ARRAY_SIZE(post_div_table_cam_cc_pll0_out_odd),
+ .width = 4,
+ .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_LUCID_OLE],
+ .clkr.hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_pll0_out_odd",
+ .parent_hws = (const struct clk_hw*[]) {
+ &cam_cc_pll0.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_alpha_pll_postdiv_lucid_ole_ops,
+ },
+};
+
+/* 728.0 MHz Configuration */
+static const struct alpha_pll_config cam_cc_pll1_config = {
+ .l = 0x25,
+ .alpha = 0xeaaa,
+ .config_ctl_val = 0x20485699,
+ .config_ctl_hi_val = 0x00182261,
+ .config_ctl_hi1_val = 0x82aa299c,
+ .test_ctl_val = 0x00000000,
+ .test_ctl_hi_val = 0x00000003,
+ .test_ctl_hi1_val = 0x00009000,
+ .test_ctl_hi2_val = 0x00000034,
+ .user_ctl_val = 0x00000400,
+ .user_ctl_hi_val = 0x00000005,
+};
+
+static struct clk_alpha_pll cam_cc_pll1 = {
+ .offset = 0x1000,
+ .config = &cam_cc_pll1_config,
+ .vco_table = lucid_ole_vco,
+ .num_vco = ARRAY_SIZE(lucid_ole_vco),
+ .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_LUCID_OLE],
+ .clkr = {
+ .hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_pll1",
+ .parent_data = &(const struct clk_parent_data) {
+ .index = DT_BI_TCXO,
+ },
+ .num_parents = 1,
+ .ops = &clk_alpha_pll_lucid_evo_ops,
+ },
+ },
+};
+
+static const struct clk_div_table post_div_table_cam_cc_pll1_out_even[] = {
+ { 0x1, 2 },
+ { }
+};
+
+static struct clk_alpha_pll_postdiv cam_cc_pll1_out_even = {
+ .offset = 0x1000,
+ .post_div_shift = 10,
+ .post_div_table = post_div_table_cam_cc_pll1_out_even,
+ .num_post_div = ARRAY_SIZE(post_div_table_cam_cc_pll1_out_even),
+ .width = 4,
+ .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_LUCID_OLE],
+ .clkr.hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_pll1_out_even",
+ .parent_hws = (const struct clk_hw*[]) {
+ &cam_cc_pll1.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_alpha_pll_postdiv_lucid_ole_ops,
+ },
+};
+
+/* 960.0 MHz Configuration */
+static const struct alpha_pll_config cam_cc_pll2_config = {
+ .l = 0x32,
+ .alpha = 0x0,
+ .config_ctl_val = 0x10000030,
+ .config_ctl_hi_val = 0x80890263,
+ .config_ctl_hi1_val = 0x00000217,
+ .user_ctl_val = 0x00000000,
+ .user_ctl_hi_val = 0x00100000,
+};
+
+static struct clk_alpha_pll cam_cc_pll2 = {
+ .offset = 0x2000,
+ .config = &cam_cc_pll2_config,
+ .vco_table = rivian_ole_vco,
+ .num_vco = ARRAY_SIZE(rivian_ole_vco),
+ .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_RIVIAN_EVO],
+ .clkr = {
+ .hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_pll2",
+ .parent_data = &(const struct clk_parent_data) {
+ .index = DT_BI_TCXO,
+ },
+ .num_parents = 1,
+ .ops = &clk_alpha_pll_rivian_evo_ops,
+ },
+ },
+};
+
+/* 864.0 MHz Configuration */
+static const struct alpha_pll_config cam_cc_pll3_config = {
+ .l = 0x2d,
+ .alpha = 0x0,
+ .config_ctl_val = 0x20485699,
+ .config_ctl_hi_val = 0x00182261,
+ .config_ctl_hi1_val = 0x82aa299c,
+ .test_ctl_val = 0x00000000,
+ .test_ctl_hi_val = 0x00000003,
+ .test_ctl_hi1_val = 0x00009000,
+ .test_ctl_hi2_val = 0x00000034,
+ .user_ctl_val = 0x00000400,
+ .user_ctl_hi_val = 0x00000005,
+};
+
+static struct clk_alpha_pll cam_cc_pll3 = {
+ .offset = 0x3000,
+ .config = &cam_cc_pll3_config,
+ .vco_table = lucid_ole_vco,
+ .num_vco = ARRAY_SIZE(lucid_ole_vco),
+ .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_LUCID_OLE],
+ .clkr = {
+ .hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_pll3",
+ .parent_data = &(const struct clk_parent_data) {
+ .index = DT_BI_TCXO,
+ },
+ .num_parents = 1,
+ .ops = &clk_alpha_pll_lucid_evo_ops,
+ },
+ },
+};
+
+static const struct clk_div_table post_div_table_cam_cc_pll3_out_even[] = {
+ { 0x1, 2 },
+ { }
+};
+
+static struct clk_alpha_pll_postdiv cam_cc_pll3_out_even = {
+ .offset = 0x3000,
+ .post_div_shift = 10,
+ .post_div_table = post_div_table_cam_cc_pll3_out_even,
+ .num_post_div = ARRAY_SIZE(post_div_table_cam_cc_pll3_out_even),
+ .width = 4,
+ .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_LUCID_OLE],
+ .clkr.hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_pll3_out_even",
+ .parent_hws = (const struct clk_hw*[]) {
+ &cam_cc_pll3.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_alpha_pll_postdiv_lucid_ole_ops,
+ },
+};
+
+/* 960.0 MHz Configuration */
+static const struct alpha_pll_config cam_cc_pll6_config = {
+ .l = 0x32,
+ .alpha = 0x0,
+ .config_ctl_val = 0x20485699,
+ .config_ctl_hi_val = 0x00182261,
+ .config_ctl_hi1_val = 0x82aa299c,
+ .test_ctl_val = 0x00000000,
+ .test_ctl_hi_val = 0x00000003,
+ .test_ctl_hi1_val = 0x00009000,
+ .test_ctl_hi2_val = 0x00000034,
+ .user_ctl_val = 0x00000400,
+ .user_ctl_hi_val = 0x00000005,
+};
+
+static struct clk_alpha_pll cam_cc_pll6 = {
+ .offset = 0x6000,
+ .config = &cam_cc_pll6_config,
+ .vco_table = lucid_ole_vco,
+ .num_vco = ARRAY_SIZE(lucid_ole_vco),
+ .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_LUCID_OLE],
+ .clkr = {
+ .hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_pll6",
+ .parent_data = &(const struct clk_parent_data) {
+ .index = DT_BI_TCXO,
+ },
+ .num_parents = 1,
+ .ops = &clk_alpha_pll_lucid_evo_ops,
+ },
+ },
+};
+
+static const struct clk_div_table post_div_table_cam_cc_pll6_out_even[] = {
+ { 0x1, 2 },
+ { }
+};
+
+static struct clk_alpha_pll_postdiv cam_cc_pll6_out_even = {
+ .offset = 0x6000,
+ .post_div_shift = 10,
+ .post_div_table = post_div_table_cam_cc_pll6_out_even,
+ .num_post_div = ARRAY_SIZE(post_div_table_cam_cc_pll6_out_even),
+ .width = 4,
+ .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_LUCID_OLE],
+ .clkr.hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_pll6_out_even",
+ .parent_hws = (const struct clk_hw*[]) {
+ &cam_cc_pll6.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_alpha_pll_postdiv_lucid_ole_ops,
+ },
+};
+
+static const struct parent_map cam_cc_parent_map_0[] = {
+ { P_BI_TCXO, 0 },
+ { P_CAM_CC_PLL0_OUT_MAIN, 1 },
+ { P_CAM_CC_PLL0_OUT_EVEN, 2 },
+ { P_CAM_CC_PLL0_OUT_ODD, 3 },
+ { P_CAM_CC_PLL6_OUT_EVEN, 5 },
+};
+
+static const struct clk_parent_data cam_cc_parent_data_0[] = {
+ { .index = DT_BI_TCXO },
+ { .hw = &cam_cc_pll0.clkr.hw },
+ { .hw = &cam_cc_pll0_out_even.clkr.hw },
+ { .hw = &cam_cc_pll0_out_odd.clkr.hw },
+ { .hw = &cam_cc_pll6_out_even.clkr.hw },
+};
+
+static const struct parent_map cam_cc_parent_map_1[] = {
+ { P_BI_TCXO, 0 },
+ { P_CAM_CC_PLL2_OUT_EVEN, 3 },
+ { P_CAM_CC_PLL2_OUT_MAIN, 5 },
+};
+
+static const struct clk_parent_data cam_cc_parent_data_1[] = {
+ { .index = DT_BI_TCXO },
+ { .hw = &cam_cc_pll2.clkr.hw },
+ { .hw = &cam_cc_pll2.clkr.hw },
+};
+
+static const struct parent_map cam_cc_parent_map_2[] = {
+ { P_BI_TCXO, 0 },
+ { P_CAM_CC_PLL3_OUT_EVEN, 6 },
+};
+
+static const struct clk_parent_data cam_cc_parent_data_2[] = {
+ { .index = DT_BI_TCXO },
+ { .hw = &cam_cc_pll3_out_even.clkr.hw },
+};
+
+static const struct parent_map cam_cc_parent_map_3[] = {
+ { P_BI_TCXO, 0 },
+ { P_CAM_CC_PLL1_OUT_EVEN, 4 },
+};
+
+static const struct clk_parent_data cam_cc_parent_data_3[] = {
+ { .index = DT_BI_TCXO },
+ { .hw = &cam_cc_pll1_out_even.clkr.hw },
+};
+
+static const struct parent_map cam_cc_parent_map_4[] = {
+ { P_SLEEP_CLK, 0 },
+};
+
+static const struct clk_parent_data cam_cc_parent_data_4[] = {
+ { .index = DT_SLEEP_CLK },
+};
+
+static const struct parent_map cam_cc_parent_map_5[] = {
+ { P_BI_TCXO, 0 },
+};
+
+static const struct clk_parent_data cam_cc_parent_data_5[] = {
+ { .index = DT_BI_TCXO },
+};
+
+static const struct freq_tbl ftbl_cam_cc_bps_clk_src[] = {
+ F(19200000, P_BI_TCXO, 1, 0, 0),
+ F(200000000, P_CAM_CC_PLL0_OUT_ODD, 2, 0, 0),
+ F(400000000, P_CAM_CC_PLL0_OUT_ODD, 1, 0, 0),
+ F(600000000, P_CAM_CC_PLL0_OUT_EVEN, 1, 0, 0),
+ { }
+};
+
+static struct clk_rcg2 cam_cc_bps_clk_src = {
+ .cmd_rcgr = 0x10278,
+ .mnd_width = 0,
+ .hid_width = 5,
+ .parent_map = cam_cc_parent_map_0,
+ .freq_tbl = ftbl_cam_cc_bps_clk_src,
+ .hw_clk_ctrl = true,
+ .clkr.hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_bps_clk_src",
+ .parent_data = cam_cc_parent_data_0,
+ .num_parents = ARRAY_SIZE(cam_cc_parent_data_0),
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_shared_ops,
+ },
+};
+
+static const struct freq_tbl ftbl_cam_cc_camnoc_axi_rt_clk_src[] = {
+ F(300000000, P_CAM_CC_PLL0_OUT_EVEN, 2, 0, 0),
+ F(400000000, P_CAM_CC_PLL0_OUT_ODD, 1, 0, 0),
+ { }
+};
+
+static struct clk_rcg2 cam_cc_camnoc_axi_rt_clk_src = {
+ .cmd_rcgr = 0x138f8,
+ .mnd_width = 0,
+ .hid_width = 5,
+ .parent_map = cam_cc_parent_map_0,
+ .freq_tbl = ftbl_cam_cc_camnoc_axi_rt_clk_src,
+ .hw_clk_ctrl = true,
+ .clkr.hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_camnoc_axi_rt_clk_src",
+ .parent_data = cam_cc_parent_data_0,
+ .num_parents = ARRAY_SIZE(cam_cc_parent_data_0),
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_shared_ops,
+ },
+};
+
+static const struct freq_tbl ftbl_cam_cc_cci_0_clk_src[] = {
+ F(19200000, P_BI_TCXO, 1, 0, 0),
+ F(37500000, P_CAM_CC_PLL0_OUT_EVEN, 16, 0, 0),
+ { }
+};
+
+static struct clk_rcg2 cam_cc_cci_0_clk_src = {
+ .cmd_rcgr = 0x1365c,
+ .mnd_width = 8,
+ .hid_width = 5,
+ .parent_map = cam_cc_parent_map_0,
+ .freq_tbl = ftbl_cam_cc_cci_0_clk_src,
+ .hw_clk_ctrl = true,
+ .clkr.hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_cci_0_clk_src",
+ .parent_data = cam_cc_parent_data_0,
+ .num_parents = ARRAY_SIZE(cam_cc_parent_data_0),
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_shared_ops,
+ },
+};
+
+static struct clk_rcg2 cam_cc_cci_1_clk_src = {
+ .cmd_rcgr = 0x1378c,
+ .mnd_width = 8,
+ .hid_width = 5,
+ .parent_map = cam_cc_parent_map_0,
+ .freq_tbl = ftbl_cam_cc_cci_0_clk_src,
+ .hw_clk_ctrl = true,
+ .clkr.hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_cci_1_clk_src",
+ .parent_data = cam_cc_parent_data_0,
+ .num_parents = ARRAY_SIZE(cam_cc_parent_data_0),
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_shared_ops,
+ },
+};
+
+static const struct freq_tbl ftbl_cam_cc_cphy_rx_clk_src[] = {
+ F(19200000, P_BI_TCXO, 1, 0, 0),
+ F(400000000, P_CAM_CC_PLL0_OUT_MAIN, 3, 0, 0),
+ F(480000000, P_CAM_CC_PLL0_OUT_MAIN, 2.5, 0, 0),
+ { }
+};
+
+static struct clk_rcg2 cam_cc_cphy_rx_clk_src = {
+ .cmd_rcgr = 0x11164,
+ .mnd_width = 0,
+ .hid_width = 5,
+ .parent_map = cam_cc_parent_map_0,
+ .freq_tbl = ftbl_cam_cc_cphy_rx_clk_src,
+ .hw_clk_ctrl = true,
+ .clkr.hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_cphy_rx_clk_src",
+ .parent_data = cam_cc_parent_data_0,
+ .num_parents = ARRAY_SIZE(cam_cc_parent_data_0),
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_shared_ops,
+ },
+};
+
+static const struct freq_tbl ftbl_cam_cc_csi0phytimer_clk_src[] = {
+ F(19200000, P_BI_TCXO, 1, 0, 0),
+ F(400000000, P_CAM_CC_PLL0_OUT_ODD, 1, 0, 0),
+ { }
+};
+
+static struct clk_rcg2 cam_cc_csi0phytimer_clk_src = {
+ .cmd_rcgr = 0x150e0,
+ .mnd_width = 0,
+ .hid_width = 5,
+ .parent_map = cam_cc_parent_map_0,
+ .freq_tbl = ftbl_cam_cc_csi0phytimer_clk_src,
+ .hw_clk_ctrl = true,
+ .clkr.hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_csi0phytimer_clk_src",
+ .parent_data = cam_cc_parent_data_0,
+ .num_parents = ARRAY_SIZE(cam_cc_parent_data_0),
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_shared_ops,
+ },
+};
+
+static struct clk_rcg2 cam_cc_csi1phytimer_clk_src = {
+ .cmd_rcgr = 0x15104,
+ .mnd_width = 0,
+ .hid_width = 5,
+ .parent_map = cam_cc_parent_map_0,
+ .freq_tbl = ftbl_cam_cc_csi0phytimer_clk_src,
+ .hw_clk_ctrl = true,
+ .clkr.hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_csi1phytimer_clk_src",
+ .parent_data = cam_cc_parent_data_0,
+ .num_parents = ARRAY_SIZE(cam_cc_parent_data_0),
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_shared_ops,
+ },
+};
+
+static struct clk_rcg2 cam_cc_csi2phytimer_clk_src = {
+ .cmd_rcgr = 0x15124,
+ .mnd_width = 0,
+ .hid_width = 5,
+ .parent_map = cam_cc_parent_map_0,
+ .freq_tbl = ftbl_cam_cc_csi0phytimer_clk_src,
+ .hw_clk_ctrl = true,
+ .clkr.hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_csi2phytimer_clk_src",
+ .parent_data = cam_cc_parent_data_0,
+ .num_parents = ARRAY_SIZE(cam_cc_parent_data_0),
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_shared_ops,
+ },
+};
+
+static struct clk_rcg2 cam_cc_csi3phytimer_clk_src = {
+ .cmd_rcgr = 0x15258,
+ .mnd_width = 0,
+ .hid_width = 5,
+ .parent_map = cam_cc_parent_map_0,
+ .freq_tbl = ftbl_cam_cc_csi0phytimer_clk_src,
+ .hw_clk_ctrl = true,
+ .clkr.hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_csi3phytimer_clk_src",
+ .parent_data = cam_cc_parent_data_0,
+ .num_parents = ARRAY_SIZE(cam_cc_parent_data_0),
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_shared_ops,
+ },
+};
+
+static struct clk_rcg2 cam_cc_csi4phytimer_clk_src = {
+ .cmd_rcgr = 0x1538c,
+ .mnd_width = 0,
+ .hid_width = 5,
+ .parent_map = cam_cc_parent_map_0,
+ .freq_tbl = ftbl_cam_cc_csi0phytimer_clk_src,
+ .hw_clk_ctrl = true,
+ .clkr.hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_csi4phytimer_clk_src",
+ .parent_data = cam_cc_parent_data_0,
+ .num_parents = ARRAY_SIZE(cam_cc_parent_data_0),
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_shared_ops,
+ },
+};
+
+static struct clk_rcg2 cam_cc_csi5phytimer_clk_src = {
+ .cmd_rcgr = 0x154c0,
+ .mnd_width = 0,
+ .hid_width = 5,
+ .parent_map = cam_cc_parent_map_0,
+ .freq_tbl = ftbl_cam_cc_csi0phytimer_clk_src,
+ .hw_clk_ctrl = true,
+ .clkr.hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_csi5phytimer_clk_src",
+ .parent_data = cam_cc_parent_data_0,
+ .num_parents = ARRAY_SIZE(cam_cc_parent_data_0),
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_shared_ops,
+ },
+};
+
+static const struct freq_tbl ftbl_cam_cc_csid_clk_src[] = {
+ F(400000000, P_CAM_CC_PLL0_OUT_MAIN, 3, 0, 0),
+ F(480000000, P_CAM_CC_PLL0_OUT_MAIN, 2.5, 0, 0),
+ { }
+};
+
+static struct clk_rcg2 cam_cc_csid_clk_src = {
+ .cmd_rcgr = 0x138d4,
+ .mnd_width = 0,
+ .hid_width = 5,
+ .parent_map = cam_cc_parent_map_0,
+ .freq_tbl = ftbl_cam_cc_csid_clk_src,
+ .hw_clk_ctrl = true,
+ .clkr.hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_csid_clk_src",
+ .parent_data = cam_cc_parent_data_0,
+ .num_parents = ARRAY_SIZE(cam_cc_parent_data_0),
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_shared_ops,
+ },
+};
+
+static const struct freq_tbl ftbl_cam_cc_fast_ahb_clk_src[] = {
+ F(19200000, P_BI_TCXO, 1, 0, 0),
+ F(100000000, P_CAM_CC_PLL0_OUT_EVEN, 6, 0, 0),
+ F(200000000, P_CAM_CC_PLL0_OUT_EVEN, 3, 0, 0),
+ F(300000000, P_CAM_CC_PLL0_OUT_MAIN, 4, 0, 0),
+ F(400000000, P_CAM_CC_PLL0_OUT_MAIN, 3, 0, 0),
+ { }
+};
+
+static struct clk_rcg2 cam_cc_fast_ahb_clk_src = {
+ .cmd_rcgr = 0x10018,
+ .mnd_width = 0,
+ .hid_width = 5,
+ .parent_map = cam_cc_parent_map_0,
+ .freq_tbl = ftbl_cam_cc_fast_ahb_clk_src,
+ .hw_clk_ctrl = true,
+ .clkr.hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_fast_ahb_clk_src",
+ .parent_data = cam_cc_parent_data_0,
+ .num_parents = ARRAY_SIZE(cam_cc_parent_data_0),
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_shared_ops,
+ },
+};
+
+static const struct freq_tbl ftbl_cam_cc_icp_clk_src[] = {
+ F(19200000, P_BI_TCXO, 1, 0, 0),
+ F(400000000, P_CAM_CC_PLL0_OUT_ODD, 1, 0, 0),
+ F(480000000, P_CAM_CC_PLL6_OUT_EVEN, 1, 0, 0),
+ F(600000000, P_CAM_CC_PLL0_OUT_MAIN, 2, 0, 0),
+ { }
+};
+
+static struct clk_rcg2 cam_cc_icp_clk_src = {
+ .cmd_rcgr = 0x13520,
+ .mnd_width = 0,
+ .hid_width = 5,
+ .parent_map = cam_cc_parent_map_0,
+ .freq_tbl = ftbl_cam_cc_icp_clk_src,
+ .hw_clk_ctrl = true,
+ .clkr.hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_icp_clk_src",
+ .parent_data = cam_cc_parent_data_0,
+ .num_parents = ARRAY_SIZE(cam_cc_parent_data_0),
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_shared_ops,
+ },
+};
+
+static const struct freq_tbl ftbl_cam_cc_ife_0_clk_src[] = {
+ F(19200000, P_BI_TCXO, 1, 0, 0),
+ F(432000000, P_CAM_CC_PLL3_OUT_EVEN, 1, 0, 0),
+ F(594000000, P_CAM_CC_PLL3_OUT_EVEN, 1, 0, 0),
+ F(675000000, P_CAM_CC_PLL3_OUT_EVEN, 1, 0, 0),
+ F(727000000, P_CAM_CC_PLL3_OUT_EVEN, 1, 0, 0),
+ { }
+};
+
+static struct clk_rcg2 cam_cc_ife_0_clk_src = {
+ .cmd_rcgr = 0x11018,
+ .mnd_width = 0,
+ .hid_width = 5,
+ .parent_map = cam_cc_parent_map_2,
+ .freq_tbl = ftbl_cam_cc_ife_0_clk_src,
+ .hw_clk_ctrl = true,
+ .clkr.hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_ife_0_clk_src",
+ .parent_data = cam_cc_parent_data_2,
+ .num_parents = ARRAY_SIZE(cam_cc_parent_data_2),
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_shared_ops,
+ },
+};
+
+static const struct freq_tbl ftbl_cam_cc_ife_lite_clk_src[] = {
+ F(400000000, P_CAM_CC_PLL0_OUT_ODD, 1, 0, 0),
+ F(480000000, P_CAM_CC_PLL6_OUT_EVEN, 1, 0, 0),
+ { }
+};
+
+static struct clk_rcg2 cam_cc_ife_lite_clk_src = {
+ .cmd_rcgr = 0x13000,
+ .mnd_width = 0,
+ .hid_width = 5,
+ .parent_map = cam_cc_parent_map_0,
+ .freq_tbl = ftbl_cam_cc_ife_lite_clk_src,
+ .hw_clk_ctrl = true,
+ .clkr.hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_ife_lite_clk_src",
+ .parent_data = cam_cc_parent_data_0,
+ .num_parents = ARRAY_SIZE(cam_cc_parent_data_0),
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_shared_ops,
+ },
+};
+
+static struct clk_rcg2 cam_cc_ife_lite_csid_clk_src = {
+ .cmd_rcgr = 0x1313c,
+ .mnd_width = 0,
+ .hid_width = 5,
+ .parent_map = cam_cc_parent_map_0,
+ .freq_tbl = ftbl_cam_cc_ife_lite_clk_src,
+ .hw_clk_ctrl = true,
+ .clkr.hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_ife_lite_csid_clk_src",
+ .parent_data = cam_cc_parent_data_0,
+ .num_parents = ARRAY_SIZE(cam_cc_parent_data_0),
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_shared_ops,
+ },
+};
+
+static const struct freq_tbl ftbl_cam_cc_ipe_nps_clk_src[] = {
+ F(364000000, P_CAM_CC_PLL1_OUT_EVEN, 1, 0, 0),
+ F(500000000, P_CAM_CC_PLL1_OUT_EVEN, 1, 0, 0),
+ F(600000000, P_CAM_CC_PLL1_OUT_EVEN, 1, 0, 0),
+ F(700000000, P_CAM_CC_PLL1_OUT_EVEN, 1, 0, 0),
+ { }
+};
+
+static struct clk_rcg2 cam_cc_ipe_nps_clk_src = {
+ .cmd_rcgr = 0x103cc,
+ .mnd_width = 0,
+ .hid_width = 5,
+ .parent_map = cam_cc_parent_map_3,
+ .freq_tbl = ftbl_cam_cc_ipe_nps_clk_src,
+ .hw_clk_ctrl = true,
+ .clkr.hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_ipe_nps_clk_src",
+ .parent_data = cam_cc_parent_data_3,
+ .num_parents = ARRAY_SIZE(cam_cc_parent_data_3),
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_shared_ops,
+ },
+};
+
+static const struct freq_tbl ftbl_cam_cc_jpeg_clk_src[] = {
+ F(19200000, P_BI_TCXO, 1, 0, 0),
+ F(200000000, P_CAM_CC_PLL0_OUT_ODD, 2, 0, 0),
+ F(400000000, P_CAM_CC_PLL0_OUT_ODD, 1, 0, 0),
+ F(480000000, P_CAM_CC_PLL6_OUT_EVEN, 1, 0, 0),
+ F(600000000, P_CAM_CC_PLL0_OUT_EVEN, 1, 0, 0),
+ { }
+};
+
+static struct clk_rcg2 cam_cc_jpeg_clk_src = {
+ .cmd_rcgr = 0x133dc,
+ .mnd_width = 0,
+ .hid_width = 5,
+ .parent_map = cam_cc_parent_map_0,
+ .freq_tbl = ftbl_cam_cc_jpeg_clk_src,
+ .hw_clk_ctrl = true,
+ .clkr.hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_jpeg_clk_src",
+ .parent_data = cam_cc_parent_data_0,
+ .num_parents = ARRAY_SIZE(cam_cc_parent_data_0),
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_shared_ops,
+ },
+};
+
+static const struct freq_tbl ftbl_cam_cc_mclk0_clk_src[] = {
+ F(19200000, P_BI_TCXO, 1, 0, 0),
+ F(24000000, P_CAM_CC_PLL2_OUT_MAIN, 10, 1, 4),
+ F(68571429, P_CAM_CC_PLL2_OUT_MAIN, 14, 0, 0),
+ { }
+};
+
+static struct clk_rcg2 cam_cc_mclk0_clk_src = {
+ .cmd_rcgr = 0x15000,
+ .mnd_width = 8,
+ .hid_width = 5,
+ .parent_map = cam_cc_parent_map_1,
+ .freq_tbl = ftbl_cam_cc_mclk0_clk_src,
+ .hw_clk_ctrl = true,
+ .clkr.hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_mclk0_clk_src",
+ .parent_data = cam_cc_parent_data_1,
+ .num_parents = ARRAY_SIZE(cam_cc_parent_data_1),
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_shared_ops,
+ },
+};
+
+static struct clk_rcg2 cam_cc_mclk1_clk_src = {
+ .cmd_rcgr = 0x1501c,
+ .mnd_width = 8,
+ .hid_width = 5,
+ .parent_map = cam_cc_parent_map_1,
+ .freq_tbl = ftbl_cam_cc_mclk0_clk_src,
+ .hw_clk_ctrl = true,
+ .clkr.hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_mclk1_clk_src",
+ .parent_data = cam_cc_parent_data_1,
+ .num_parents = ARRAY_SIZE(cam_cc_parent_data_1),
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_shared_ops,
+ },
+};
+
+static struct clk_rcg2 cam_cc_mclk2_clk_src = {
+ .cmd_rcgr = 0x15038,
+ .mnd_width = 8,
+ .hid_width = 5,
+ .parent_map = cam_cc_parent_map_1,
+ .freq_tbl = ftbl_cam_cc_mclk0_clk_src,
+ .hw_clk_ctrl = true,
+ .clkr.hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_mclk2_clk_src",
+ .parent_data = cam_cc_parent_data_1,
+ .num_parents = ARRAY_SIZE(cam_cc_parent_data_1),
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_shared_ops,
+ },
+};
+
+static struct clk_rcg2 cam_cc_mclk3_clk_src = {
+ .cmd_rcgr = 0x15054,
+ .mnd_width = 8,
+ .hid_width = 5,
+ .parent_map = cam_cc_parent_map_1,
+ .freq_tbl = ftbl_cam_cc_mclk0_clk_src,
+ .hw_clk_ctrl = true,
+ .clkr.hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_mclk3_clk_src",
+ .parent_data = cam_cc_parent_data_1,
+ .num_parents = ARRAY_SIZE(cam_cc_parent_data_1),
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_shared_ops,
+ },
+};
+
+static struct clk_rcg2 cam_cc_mclk4_clk_src = {
+ .cmd_rcgr = 0x15070,
+ .mnd_width = 8,
+ .hid_width = 5,
+ .parent_map = cam_cc_parent_map_1,
+ .freq_tbl = ftbl_cam_cc_mclk0_clk_src,
+ .hw_clk_ctrl = true,
+ .clkr.hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_mclk4_clk_src",
+ .parent_data = cam_cc_parent_data_1,
+ .num_parents = ARRAY_SIZE(cam_cc_parent_data_1),
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_shared_ops,
+ },
+};
+
+static struct clk_rcg2 cam_cc_mclk5_clk_src = {
+ .cmd_rcgr = 0x1508c,
+ .mnd_width = 8,
+ .hid_width = 5,
+ .parent_map = cam_cc_parent_map_1,
+ .freq_tbl = ftbl_cam_cc_mclk0_clk_src,
+ .hw_clk_ctrl = true,
+ .clkr.hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_mclk5_clk_src",
+ .parent_data = cam_cc_parent_data_1,
+ .num_parents = ARRAY_SIZE(cam_cc_parent_data_1),
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_shared_ops,
+ },
+};
+
+static struct clk_rcg2 cam_cc_mclk6_clk_src = {
+ .cmd_rcgr = 0x150a8,
+ .mnd_width = 8,
+ .hid_width = 5,
+ .parent_map = cam_cc_parent_map_1,
+ .freq_tbl = ftbl_cam_cc_mclk0_clk_src,
+ .hw_clk_ctrl = true,
+ .clkr.hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_mclk6_clk_src",
+ .parent_data = cam_cc_parent_data_1,
+ .num_parents = ARRAY_SIZE(cam_cc_parent_data_1),
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_shared_ops,
+ },
+};
+
+static struct clk_rcg2 cam_cc_mclk7_clk_src = {
+ .cmd_rcgr = 0x150c4,
+ .mnd_width = 8,
+ .hid_width = 5,
+ .parent_map = cam_cc_parent_map_1,
+ .freq_tbl = ftbl_cam_cc_mclk0_clk_src,
+ .hw_clk_ctrl = true,
+ .clkr.hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_mclk7_clk_src",
+ .parent_data = cam_cc_parent_data_1,
+ .num_parents = ARRAY_SIZE(cam_cc_parent_data_1),
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_shared_ops,
+ },
+};
+
+static const struct freq_tbl ftbl_cam_cc_qdss_debug_clk_src[] = {
+ F(19200000, P_BI_TCXO, 1, 0, 0),
+ F(75000000, P_CAM_CC_PLL0_OUT_EVEN, 8, 0, 0),
+ F(150000000, P_CAM_CC_PLL0_OUT_EVEN, 4, 0, 0),
+ F(300000000, P_CAM_CC_PLL0_OUT_MAIN, 4, 0, 0),
+ { }
+};
+
+static struct clk_rcg2 cam_cc_qdss_debug_clk_src = {
+ .cmd_rcgr = 0x13938,
+ .mnd_width = 0,
+ .hid_width = 5,
+ .parent_map = cam_cc_parent_map_0,
+ .freq_tbl = ftbl_cam_cc_qdss_debug_clk_src,
+ .hw_clk_ctrl = true,
+ .clkr.hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_qdss_debug_clk_src",
+ .parent_data = cam_cc_parent_data_0,
+ .num_parents = ARRAY_SIZE(cam_cc_parent_data_0),
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_shared_ops,
+ },
+};
+
+static const struct freq_tbl ftbl_cam_cc_sleep_clk_src[] = {
+ F(32000, P_SLEEP_CLK, 1, 0, 0),
+ { }
+};
+
+static struct clk_rcg2 cam_cc_sleep_clk_src = {
+ .cmd_rcgr = 0x13aa0,
+ .mnd_width = 0,
+ .hid_width = 5,
+ .parent_map = cam_cc_parent_map_4,
+ .freq_tbl = ftbl_cam_cc_sleep_clk_src,
+ .clkr.hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_sleep_clk_src",
+ .parent_data = cam_cc_parent_data_4,
+ .num_parents = ARRAY_SIZE(cam_cc_parent_data_4),
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_shared_ops,
+ },
+};
+
+static const struct freq_tbl ftbl_cam_cc_slow_ahb_clk_src[] = {
+ F(19200000, P_BI_TCXO, 1, 0, 0),
+ F(80000000, P_CAM_CC_PLL0_OUT_EVEN, 7.5, 0, 0),
+ { }
+};
+
+static struct clk_rcg2 cam_cc_slow_ahb_clk_src = {
+ .cmd_rcgr = 0x10148,
+ .mnd_width = 8,
+ .hid_width = 5,
+ .parent_map = cam_cc_parent_map_0,
+ .freq_tbl = ftbl_cam_cc_slow_ahb_clk_src,
+ .hw_clk_ctrl = true,
+ .clkr.hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_slow_ahb_clk_src",
+ .parent_data = cam_cc_parent_data_0,
+ .num_parents = ARRAY_SIZE(cam_cc_parent_data_0),
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_shared_ops,
+ },
+};
+
+static const struct freq_tbl ftbl_cam_cc_xo_clk_src[] = {
+ F(19200000, P_BI_TCXO, 1, 0, 0),
+ { }
+};
+
+static struct clk_rcg2 cam_cc_xo_clk_src = {
+ .cmd_rcgr = 0x13a84,
+ .mnd_width = 0,
+ .hid_width = 5,
+ .parent_map = cam_cc_parent_map_5,
+ .freq_tbl = ftbl_cam_cc_xo_clk_src,
+ .hw_clk_ctrl = true,
+ .clkr.hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_xo_clk_src",
+ .parent_data = cam_cc_parent_data_5,
+ .num_parents = ARRAY_SIZE(cam_cc_parent_data_5),
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_shared_ops,
+ },
+};
+
+static struct clk_branch cam_cc_bps_ahb_clk = {
+ .halt_reg = 0x10274,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x10274,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_bps_ahb_clk",
+ .parent_hws = (const struct clk_hw*[]) {
+ &cam_cc_slow_ahb_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_bps_clk = {
+ .halt_reg = 0x103a4,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x103a4,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_bps_clk",
+ .parent_hws = (const struct clk_hw*[]) {
+ &cam_cc_bps_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_bps_fast_ahb_clk = {
+ .halt_reg = 0x10144,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x10144,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_bps_fast_ahb_clk",
+ .parent_hws = (const struct clk_hw*[]) {
+ &cam_cc_fast_ahb_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_camnoc_axi_nrt_clk = {
+ .halt_reg = 0x13920,
+ .halt_check = BRANCH_HALT_VOTED,
+ .hwcg_reg = 0x13920,
+ .hwcg_bit = 1,
+ .clkr = {
+ .enable_reg = 0x13920,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_camnoc_axi_nrt_clk",
+ .parent_hws = (const struct clk_hw*[]) {
+ &cam_cc_camnoc_axi_rt_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_camnoc_axi_rt_clk = {
+ .halt_reg = 0x13910,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x13910,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_camnoc_axi_rt_clk",
+ .parent_hws = (const struct clk_hw*[]) {
+ &cam_cc_camnoc_axi_rt_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_camnoc_dcd_xo_clk = {
+ .halt_reg = 0x1392c,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x1392c,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_camnoc_dcd_xo_clk",
+ .parent_hws = (const struct clk_hw*[]) {
+ &cam_cc_xo_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_camnoc_xo_clk = {
+ .halt_reg = 0x13930,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x13930,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_camnoc_xo_clk",
+ .parent_hws = (const struct clk_hw*[]) {
+ &cam_cc_xo_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_cci_0_clk = {
+ .halt_reg = 0x13788,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x13788,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_cci_0_clk",
+ .parent_hws = (const struct clk_hw*[]) {
+ &cam_cc_cci_0_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_cci_1_clk = {
+ .halt_reg = 0x138b8,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x138b8,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_cci_1_clk",
+ .parent_hws = (const struct clk_hw*[]) {
+ &cam_cc_cci_1_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_core_ahb_clk = {
+ .halt_reg = 0x13a80,
+ .halt_check = BRANCH_HALT_VOTED,
+ .clkr = {
+ .enable_reg = 0x13a80,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_core_ahb_clk",
+ .parent_hws = (const struct clk_hw*[]) {
+ &cam_cc_slow_ahb_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_cpas_ahb_clk = {
+ .halt_reg = 0x138bc,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x138bc,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_cpas_ahb_clk",
+ .parent_hws = (const struct clk_hw*[]) {
+ &cam_cc_slow_ahb_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_cpas_bps_clk = {
+ .halt_reg = 0x103b0,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x103b0,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_cpas_bps_clk",
+ .parent_hws = (const struct clk_hw*[]) {
+ &cam_cc_bps_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_cpas_fast_ahb_clk = {
+ .halt_reg = 0x138c8,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x138c8,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_cpas_fast_ahb_clk",
+ .parent_hws = (const struct clk_hw*[]) {
+ &cam_cc_fast_ahb_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_cpas_ife_0_clk = {
+ .halt_reg = 0x11150,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x11150,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_cpas_ife_0_clk",
+ .parent_hws = (const struct clk_hw*[]) {
+ &cam_cc_ife_0_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_cpas_ife_lite_clk = {
+ .halt_reg = 0x13138,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x13138,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_cpas_ife_lite_clk",
+ .parent_hws = (const struct clk_hw*[]) {
+ &cam_cc_ife_lite_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_cpas_ipe_nps_clk = {
+ .halt_reg = 0x10504,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x10504,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_cpas_ipe_nps_clk",
+ .parent_hws = (const struct clk_hw*[]) {
+ &cam_cc_ipe_nps_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_csi0phytimer_clk = {
+ .halt_reg = 0x150f8,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x150f8,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_csi0phytimer_clk",
+ .parent_hws = (const struct clk_hw*[]) {
+ &cam_cc_csi0phytimer_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_csi1phytimer_clk = {
+ .halt_reg = 0x1511c,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x1511c,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_csi1phytimer_clk",
+ .parent_hws = (const struct clk_hw*[]) {
+ &cam_cc_csi1phytimer_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_csi2phytimer_clk = {
+ .halt_reg = 0x15250,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x15250,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_csi2phytimer_clk",
+ .parent_hws = (const struct clk_hw*[]) {
+ &cam_cc_csi2phytimer_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_csi3phytimer_clk = {
+ .halt_reg = 0x15384,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x15384,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_csi3phytimer_clk",
+ .parent_hws = (const struct clk_hw*[]) {
+ &cam_cc_csi3phytimer_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_csi4phytimer_clk = {
+ .halt_reg = 0x154b8,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x154b8,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_csi4phytimer_clk",
+ .parent_hws = (const struct clk_hw*[]) {
+ &cam_cc_csi4phytimer_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_csi5phytimer_clk = {
+ .halt_reg = 0x155ec,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x155ec,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_csi5phytimer_clk",
+ .parent_hws = (const struct clk_hw*[]) {
+ &cam_cc_csi5phytimer_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_csid_clk = {
+ .halt_reg = 0x138ec,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x138ec,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_csid_clk",
+ .parent_hws = (const struct clk_hw*[]) {
+ &cam_cc_csid_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_csid_csiphy_rx_clk = {
+ .halt_reg = 0x15100,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x15100,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_csid_csiphy_rx_clk",
+ .parent_hws = (const struct clk_hw*[]) {
+ &cam_cc_cphy_rx_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_csiphy0_clk = {
+ .halt_reg = 0x150fc,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x150fc,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_csiphy0_clk",
+ .parent_hws = (const struct clk_hw*[]) {
+ &cam_cc_cphy_rx_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_csiphy1_clk = {
+ .halt_reg = 0x15120,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x15120,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_csiphy1_clk",
+ .parent_hws = (const struct clk_hw*[]) {
+ &cam_cc_cphy_rx_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_csiphy2_clk = {
+ .halt_reg = 0x15254,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x15254,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_csiphy2_clk",
+ .parent_hws = (const struct clk_hw*[]) {
+ &cam_cc_cphy_rx_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_csiphy3_clk = {
+ .halt_reg = 0x15388,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x15388,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_csiphy3_clk",
+ .parent_hws = (const struct clk_hw*[]) {
+ &cam_cc_cphy_rx_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_csiphy4_clk = {
+ .halt_reg = 0x154bc,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x154bc,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_csiphy4_clk",
+ .parent_hws = (const struct clk_hw*[]) {
+ &cam_cc_cphy_rx_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_csiphy5_clk = {
+ .halt_reg = 0x155f0,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x155f0,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_csiphy5_clk",
+ .parent_hws = (const struct clk_hw*[]) {
+ &cam_cc_cphy_rx_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_icp_ahb_clk = {
+ .halt_reg = 0x13658,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x13658,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_icp_ahb_clk",
+ .parent_hws = (const struct clk_hw*[]) {
+ &cam_cc_slow_ahb_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_icp_clk = {
+ .halt_reg = 0x1364c,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x1364c,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_icp_clk",
+ .parent_hws = (const struct clk_hw*[]) {
+ &cam_cc_icp_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_ife_0_clk = {
+ .halt_reg = 0x11144,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x11144,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_ife_0_clk",
+ .parent_hws = (const struct clk_hw*[]) {
+ &cam_cc_ife_0_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_ife_0_dsp_clk = {
+ .halt_reg = 0x11154,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x11154,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_ife_0_dsp_clk",
+ .parent_hws = (const struct clk_hw*[]) {
+ &cam_cc_ife_0_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_ife_0_fast_ahb_clk = {
+ .halt_reg = 0x11160,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x11160,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_ife_0_fast_ahb_clk",
+ .parent_hws = (const struct clk_hw*[]) {
+ &cam_cc_fast_ahb_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_ife_lite_ahb_clk = {
+ .halt_reg = 0x13278,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x13278,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_ife_lite_ahb_clk",
+ .parent_hws = (const struct clk_hw*[]) {
+ &cam_cc_slow_ahb_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_ife_lite_clk = {
+ .halt_reg = 0x1312c,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x1312c,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_ife_lite_clk",
+ .parent_hws = (const struct clk_hw*[]) {
+ &cam_cc_ife_lite_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_ife_lite_cphy_rx_clk = {
+ .halt_reg = 0x13274,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x13274,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_ife_lite_cphy_rx_clk",
+ .parent_hws = (const struct clk_hw*[]) {
+ &cam_cc_cphy_rx_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_ife_lite_csid_clk = {
+ .halt_reg = 0x13268,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x13268,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_ife_lite_csid_clk",
+ .parent_hws = (const struct clk_hw*[]) {
+ &cam_cc_ife_lite_csid_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_ipe_nps_ahb_clk = {
+ .halt_reg = 0x1051c,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x1051c,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_ipe_nps_ahb_clk",
+ .parent_hws = (const struct clk_hw*[]) {
+ &cam_cc_slow_ahb_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_ipe_nps_clk = {
+ .halt_reg = 0x104f8,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x104f8,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_ipe_nps_clk",
+ .parent_hws = (const struct clk_hw*[]) {
+ &cam_cc_ipe_nps_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_ipe_nps_fast_ahb_clk = {
+ .halt_reg = 0x10520,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x10520,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_ipe_nps_fast_ahb_clk",
+ .parent_hws = (const struct clk_hw*[]) {
+ &cam_cc_fast_ahb_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_ipe_pps_clk = {
+ .halt_reg = 0x10508,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x10508,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_ipe_pps_clk",
+ .parent_hws = (const struct clk_hw*[]) {
+ &cam_cc_ipe_nps_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_ipe_pps_fast_ahb_clk = {
+ .halt_reg = 0x10524,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x10524,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_ipe_pps_fast_ahb_clk",
+ .parent_hws = (const struct clk_hw*[]) {
+ &cam_cc_fast_ahb_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_jpeg_clk = {
+ .halt_reg = 0x13508,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x13508,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_jpeg_clk",
+ .parent_hws = (const struct clk_hw*[]) {
+ &cam_cc_jpeg_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_mclk0_clk = {
+ .halt_reg = 0x15018,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x15018,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_mclk0_clk",
+ .parent_hws = (const struct clk_hw*[]) {
+ &cam_cc_mclk0_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_mclk1_clk = {
+ .halt_reg = 0x15034,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x15034,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_mclk1_clk",
+ .parent_hws = (const struct clk_hw*[]) {
+ &cam_cc_mclk1_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_mclk2_clk = {
+ .halt_reg = 0x15050,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x15050,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_mclk2_clk",
+ .parent_hws = (const struct clk_hw*[]) {
+ &cam_cc_mclk2_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_mclk3_clk = {
+ .halt_reg = 0x1506c,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x1506c,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_mclk3_clk",
+ .parent_hws = (const struct clk_hw*[]) {
+ &cam_cc_mclk3_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_mclk4_clk = {
+ .halt_reg = 0x15088,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x15088,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_mclk4_clk",
+ .parent_hws = (const struct clk_hw*[]) {
+ &cam_cc_mclk4_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_mclk5_clk = {
+ .halt_reg = 0x150a4,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x150a4,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_mclk5_clk",
+ .parent_hws = (const struct clk_hw*[]) {
+ &cam_cc_mclk5_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_mclk6_clk = {
+ .halt_reg = 0x150c0,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x150c0,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_mclk6_clk",
+ .parent_hws = (const struct clk_hw*[]) {
+ &cam_cc_mclk6_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_mclk7_clk = {
+ .halt_reg = 0x150dc,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x150dc,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_mclk7_clk",
+ .parent_hws = (const struct clk_hw*[]) {
+ &cam_cc_mclk7_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_qdss_debug_clk = {
+ .halt_reg = 0x13a64,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x13a64,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_qdss_debug_clk",
+ .parent_hws = (const struct clk_hw*[]) {
+ &cam_cc_qdss_debug_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_qdss_debug_xo_clk = {
+ .halt_reg = 0x13a68,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x13a68,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_qdss_debug_xo_clk",
+ .parent_hws = (const struct clk_hw*[]) {
+ &cam_cc_xo_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct gdsc cam_cc_titan_top_gdsc = {
+ .gdscr = 0x13a6c,
+ .en_rest_wait_val = 0x2,
+ .en_few_wait_val = 0x2,
+ .clk_dis_wait_val = 0xf,
+ .pd = {
+ .name = "cam_cc_titan_top_gdsc",
+ },
+ .pwrsts = PWRSTS_OFF_ON,
+ .flags = POLL_CFG_GDSCR | RETAIN_FF_ENABLE,
+};
+
+static struct gdsc cam_cc_bps_gdsc = {
+ .gdscr = 0x10004,
+ .en_rest_wait_val = 0x2,
+ .en_few_wait_val = 0x2,
+ .clk_dis_wait_val = 0xf,
+ .pd = {
+ .name = "cam_cc_bps_gdsc",
+ },
+ .pwrsts = PWRSTS_OFF_ON,
+ .parent = &cam_cc_titan_top_gdsc.pd,
+ .flags = HW_CTRL_TRIGGER | POLL_CFG_GDSCR | RETAIN_FF_ENABLE,
+};
+
+static struct gdsc cam_cc_ife_0_gdsc = {
+ .gdscr = 0x11004,
+ .en_rest_wait_val = 0x2,
+ .en_few_wait_val = 0x2,
+ .clk_dis_wait_val = 0xf,
+ .pd = {
+ .name = "cam_cc_ife_0_gdsc",
+ },
+ .pwrsts = PWRSTS_OFF_ON,
+ .parent = &cam_cc_titan_top_gdsc.pd,
+ .flags = POLL_CFG_GDSCR | RETAIN_FF_ENABLE,
+};
+
+static struct gdsc cam_cc_ipe_0_gdsc = {
+ .gdscr = 0x103b8,
+ .en_rest_wait_val = 0x2,
+ .en_few_wait_val = 0x2,
+ .clk_dis_wait_val = 0xf,
+ .pd = {
+ .name = "cam_cc_ipe_0_gdsc",
+ },
+ .pwrsts = PWRSTS_OFF_ON,
+ .parent = &cam_cc_titan_top_gdsc.pd,
+ .flags = HW_CTRL_TRIGGER | POLL_CFG_GDSCR | RETAIN_FF_ENABLE,
+};
+
+static struct clk_regmap *cam_cc_x1p42100_clocks[] = {
+ [CAM_CC_BPS_AHB_CLK] = &cam_cc_bps_ahb_clk.clkr,
+ [CAM_CC_BPS_CLK] = &cam_cc_bps_clk.clkr,
+ [CAM_CC_BPS_CLK_SRC] = &cam_cc_bps_clk_src.clkr,
+ [CAM_CC_BPS_FAST_AHB_CLK] = &cam_cc_bps_fast_ahb_clk.clkr,
+ [CAM_CC_CAMNOC_AXI_NRT_CLK] = &cam_cc_camnoc_axi_nrt_clk.clkr,
+ [CAM_CC_CAMNOC_AXI_RT_CLK] = &cam_cc_camnoc_axi_rt_clk.clkr,
+ [CAM_CC_CAMNOC_AXI_RT_CLK_SRC] = &cam_cc_camnoc_axi_rt_clk_src.clkr,
+ [CAM_CC_CAMNOC_DCD_XO_CLK] = &cam_cc_camnoc_dcd_xo_clk.clkr,
+ [CAM_CC_CAMNOC_XO_CLK] = &cam_cc_camnoc_xo_clk.clkr,
+ [CAM_CC_CCI_0_CLK] = &cam_cc_cci_0_clk.clkr,
+ [CAM_CC_CCI_0_CLK_SRC] = &cam_cc_cci_0_clk_src.clkr,
+ [CAM_CC_CCI_1_CLK] = &cam_cc_cci_1_clk.clkr,
+ [CAM_CC_CCI_1_CLK_SRC] = &cam_cc_cci_1_clk_src.clkr,
+ [CAM_CC_CORE_AHB_CLK] = &cam_cc_core_ahb_clk.clkr,
+ [CAM_CC_CPAS_AHB_CLK] = &cam_cc_cpas_ahb_clk.clkr,
+ [CAM_CC_CPAS_BPS_CLK] = &cam_cc_cpas_bps_clk.clkr,
+ [CAM_CC_CPAS_FAST_AHB_CLK] = &cam_cc_cpas_fast_ahb_clk.clkr,
+ [CAM_CC_CPAS_IFE_0_CLK] = &cam_cc_cpas_ife_0_clk.clkr,
+ [CAM_CC_CPAS_IFE_LITE_CLK] = &cam_cc_cpas_ife_lite_clk.clkr,
+ [CAM_CC_CPAS_IPE_NPS_CLK] = &cam_cc_cpas_ipe_nps_clk.clkr,
+ [CAM_CC_CPHY_RX_CLK_SRC] = &cam_cc_cphy_rx_clk_src.clkr,
+ [CAM_CC_CSI0PHYTIMER_CLK] = &cam_cc_csi0phytimer_clk.clkr,
+ [CAM_CC_CSI0PHYTIMER_CLK_SRC] = &cam_cc_csi0phytimer_clk_src.clkr,
+ [CAM_CC_CSI1PHYTIMER_CLK] = &cam_cc_csi1phytimer_clk.clkr,
+ [CAM_CC_CSI1PHYTIMER_CLK_SRC] = &cam_cc_csi1phytimer_clk_src.clkr,
+ [CAM_CC_CSI2PHYTIMER_CLK] = &cam_cc_csi2phytimer_clk.clkr,
+ [CAM_CC_CSI2PHYTIMER_CLK_SRC] = &cam_cc_csi2phytimer_clk_src.clkr,
+ [CAM_CC_CSI3PHYTIMER_CLK] = &cam_cc_csi3phytimer_clk.clkr,
+ [CAM_CC_CSI3PHYTIMER_CLK_SRC] = &cam_cc_csi3phytimer_clk_src.clkr,
+ [CAM_CC_CSI4PHYTIMER_CLK] = &cam_cc_csi4phytimer_clk.clkr,
+ [CAM_CC_CSI4PHYTIMER_CLK_SRC] = &cam_cc_csi4phytimer_clk_src.clkr,
+ [CAM_CC_CSI5PHYTIMER_CLK] = &cam_cc_csi5phytimer_clk.clkr,
+ [CAM_CC_CSI5PHYTIMER_CLK_SRC] = &cam_cc_csi5phytimer_clk_src.clkr,
+ [CAM_CC_CSID_CLK] = &cam_cc_csid_clk.clkr,
+ [CAM_CC_CSID_CLK_SRC] = &cam_cc_csid_clk_src.clkr,
+ [CAM_CC_CSID_CSIPHY_RX_CLK] = &cam_cc_csid_csiphy_rx_clk.clkr,
+ [CAM_CC_CSIPHY0_CLK] = &cam_cc_csiphy0_clk.clkr,
+ [CAM_CC_CSIPHY1_CLK] = &cam_cc_csiphy1_clk.clkr,
+ [CAM_CC_CSIPHY2_CLK] = &cam_cc_csiphy2_clk.clkr,
+ [CAM_CC_CSIPHY3_CLK] = &cam_cc_csiphy3_clk.clkr,
+ [CAM_CC_CSIPHY4_CLK] = &cam_cc_csiphy4_clk.clkr,
+ [CAM_CC_CSIPHY5_CLK] = &cam_cc_csiphy5_clk.clkr,
+ [CAM_CC_FAST_AHB_CLK_SRC] = &cam_cc_fast_ahb_clk_src.clkr,
+ [CAM_CC_ICP_AHB_CLK] = &cam_cc_icp_ahb_clk.clkr,
+ [CAM_CC_ICP_CLK] = &cam_cc_icp_clk.clkr,
+ [CAM_CC_ICP_CLK_SRC] = &cam_cc_icp_clk_src.clkr,
+ [CAM_CC_IFE_0_CLK] = &cam_cc_ife_0_clk.clkr,
+ [CAM_CC_IFE_0_CLK_SRC] = &cam_cc_ife_0_clk_src.clkr,
+ [CAM_CC_IFE_0_DSP_CLK] = &cam_cc_ife_0_dsp_clk.clkr,
+ [CAM_CC_IFE_0_FAST_AHB_CLK] = &cam_cc_ife_0_fast_ahb_clk.clkr,
+ [CAM_CC_IFE_LITE_AHB_CLK] = &cam_cc_ife_lite_ahb_clk.clkr,
+ [CAM_CC_IFE_LITE_CLK] = &cam_cc_ife_lite_clk.clkr,
+ [CAM_CC_IFE_LITE_CLK_SRC] = &cam_cc_ife_lite_clk_src.clkr,
+ [CAM_CC_IFE_LITE_CPHY_RX_CLK] = &cam_cc_ife_lite_cphy_rx_clk.clkr,
+ [CAM_CC_IFE_LITE_CSID_CLK] = &cam_cc_ife_lite_csid_clk.clkr,
+ [CAM_CC_IFE_LITE_CSID_CLK_SRC] = &cam_cc_ife_lite_csid_clk_src.clkr,
+ [CAM_CC_IPE_NPS_AHB_CLK] = &cam_cc_ipe_nps_ahb_clk.clkr,
+ [CAM_CC_IPE_NPS_CLK] = &cam_cc_ipe_nps_clk.clkr,
+ [CAM_CC_IPE_NPS_CLK_SRC] = &cam_cc_ipe_nps_clk_src.clkr,
+ [CAM_CC_IPE_NPS_FAST_AHB_CLK] = &cam_cc_ipe_nps_fast_ahb_clk.clkr,
+ [CAM_CC_IPE_PPS_CLK] = &cam_cc_ipe_pps_clk.clkr,
+ [CAM_CC_IPE_PPS_FAST_AHB_CLK] = &cam_cc_ipe_pps_fast_ahb_clk.clkr,
+ [CAM_CC_JPEG_CLK] = &cam_cc_jpeg_clk.clkr,
+ [CAM_CC_JPEG_CLK_SRC] = &cam_cc_jpeg_clk_src.clkr,
+ [CAM_CC_MCLK0_CLK] = &cam_cc_mclk0_clk.clkr,
+ [CAM_CC_MCLK0_CLK_SRC] = &cam_cc_mclk0_clk_src.clkr,
+ [CAM_CC_MCLK1_CLK] = &cam_cc_mclk1_clk.clkr,
+ [CAM_CC_MCLK1_CLK_SRC] = &cam_cc_mclk1_clk_src.clkr,
+ [CAM_CC_MCLK2_CLK] = &cam_cc_mclk2_clk.clkr,
+ [CAM_CC_MCLK2_CLK_SRC] = &cam_cc_mclk2_clk_src.clkr,
+ [CAM_CC_MCLK3_CLK] = &cam_cc_mclk3_clk.clkr,
+ [CAM_CC_MCLK3_CLK_SRC] = &cam_cc_mclk3_clk_src.clkr,
+ [CAM_CC_MCLK4_CLK] = &cam_cc_mclk4_clk.clkr,
+ [CAM_CC_MCLK4_CLK_SRC] = &cam_cc_mclk4_clk_src.clkr,
+ [CAM_CC_MCLK5_CLK] = &cam_cc_mclk5_clk.clkr,
+ [CAM_CC_MCLK5_CLK_SRC] = &cam_cc_mclk5_clk_src.clkr,
+ [CAM_CC_MCLK6_CLK] = &cam_cc_mclk6_clk.clkr,
+ [CAM_CC_MCLK6_CLK_SRC] = &cam_cc_mclk6_clk_src.clkr,
+ [CAM_CC_MCLK7_CLK] = &cam_cc_mclk7_clk.clkr,
+ [CAM_CC_MCLK7_CLK_SRC] = &cam_cc_mclk7_clk_src.clkr,
+ [CAM_CC_PLL0] = &cam_cc_pll0.clkr,
+ [CAM_CC_PLL0_OUT_EVEN] = &cam_cc_pll0_out_even.clkr,
+ [CAM_CC_PLL0_OUT_ODD] = &cam_cc_pll0_out_odd.clkr,
+ [CAM_CC_PLL1] = &cam_cc_pll1.clkr,
+ [CAM_CC_PLL1_OUT_EVEN] = &cam_cc_pll1_out_even.clkr,
+ [CAM_CC_PLL2] = &cam_cc_pll2.clkr,
+ [CAM_CC_PLL3] = &cam_cc_pll3.clkr,
+ [CAM_CC_PLL3_OUT_EVEN] = &cam_cc_pll3_out_even.clkr,
+ [CAM_CC_PLL6] = &cam_cc_pll6.clkr,
+ [CAM_CC_PLL6_OUT_EVEN] = &cam_cc_pll6_out_even.clkr,
+ [CAM_CC_QDSS_DEBUG_CLK] = &cam_cc_qdss_debug_clk.clkr,
+ [CAM_CC_QDSS_DEBUG_CLK_SRC] = &cam_cc_qdss_debug_clk_src.clkr,
+ [CAM_CC_QDSS_DEBUG_XO_CLK] = &cam_cc_qdss_debug_xo_clk.clkr,
+ [CAM_CC_SLEEP_CLK_SRC] = &cam_cc_sleep_clk_src.clkr,
+ [CAM_CC_SLOW_AHB_CLK_SRC] = &cam_cc_slow_ahb_clk_src.clkr,
+ [CAM_CC_XO_CLK_SRC] = &cam_cc_xo_clk_src.clkr,
+};
+
+static struct gdsc *cam_cc_x1p42100_gdscs[] = {
+ [CAM_CC_BPS_GDSC] = &cam_cc_bps_gdsc,
+ [CAM_CC_IFE_0_GDSC] = &cam_cc_ife_0_gdsc,
+ [CAM_CC_IPE_0_GDSC] = &cam_cc_ipe_0_gdsc,
+ [CAM_CC_TITAN_TOP_GDSC] = &cam_cc_titan_top_gdsc,
+};
+
+static const struct qcom_reset_map cam_cc_x1p42100_resets[] = {
+ [CAM_CC_BPS_BCR] = { 0x10000 },
+ [CAM_CC_ICP_BCR] = { 0x1351c },
+ [CAM_CC_IFE_0_BCR] = { 0x11000 },
+ [CAM_CC_IPE_0_BCR] = { 0x103b4 },
+};
+
+static struct clk_alpha_pll *cam_cc_x1p42100_plls[] = {
+ &cam_cc_pll0,
+ &cam_cc_pll1,
+ &cam_cc_pll2,
+ &cam_cc_pll3,
+ &cam_cc_pll6,
+};
+
+static u32 cam_cc_x1p42100_critical_cbcrs[] = {
+ 0x13a9c, /* CAM_CC_GDSC_CLK */
+ 0x13ab8, /* CAM_CC_SLEEP_CLK */
+};
+
+static const struct regmap_config cam_cc_x1p42100_regmap_config = {
+ .reg_bits = 32,
+ .reg_stride = 4,
+ .val_bits = 32,
+ .max_register = 0x1603c,
+ .fast_io = true,
+};
+
+static struct qcom_cc_driver_data cam_cc_x1p42100_driver_data = {
+ .alpha_plls = cam_cc_x1p42100_plls,
+ .num_alpha_plls = ARRAY_SIZE(cam_cc_x1p42100_plls),
+ .clk_cbcrs = cam_cc_x1p42100_critical_cbcrs,
+ .num_clk_cbcrs = ARRAY_SIZE(cam_cc_x1p42100_critical_cbcrs),
+};
+
+static struct qcom_cc_desc cam_cc_x1p42100_desc = {
+ .config = &cam_cc_x1p42100_regmap_config,
+ .clks = cam_cc_x1p42100_clocks,
+ .num_clks = ARRAY_SIZE(cam_cc_x1p42100_clocks),
+ .resets = cam_cc_x1p42100_resets,
+ .num_resets = ARRAY_SIZE(cam_cc_x1p42100_resets),
+ .gdscs = cam_cc_x1p42100_gdscs,
+ .num_gdscs = ARRAY_SIZE(cam_cc_x1p42100_gdscs),
+ .use_rpm = true,
+ .driver_data = &cam_cc_x1p42100_driver_data,
+};
+
+static const struct of_device_id cam_cc_x1p42100_match_table[] = {
+ { .compatible = "qcom,x1p42100-camcc" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, cam_cc_x1p42100_match_table);
+
+static int cam_cc_x1p42100_probe(struct platform_device *pdev)
+{
+ return qcom_cc_probe(pdev, &cam_cc_x1p42100_desc);
+}
+
+static struct platform_driver cam_cc_x1p42100_driver = {
+ .probe = cam_cc_x1p42100_probe,
+ .driver = {
+ .name = "camcc-x1p42100",
+ .of_match_table = cam_cc_x1p42100_match_table,
+ },
+};
+
+module_platform_driver(cam_cc_x1p42100_driver);
+
+MODULE_DESCRIPTION("QTI CAMCC X1P42100 Driver");
+MODULE_LICENSE("GPL");
--
2.34.1
^ permalink raw reply related
* [PATCH v3 4/7] clk: qcom: camcc-x1e80100: Add support for camera QDSS debug clocks
From: Jagadeesh Kona @ 2026-03-31 5:24 UTC (permalink / raw)
To: Bjorn Andersson, Michael Turquette, Stephen Boyd, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Jagadeesh Kona,
Bryan O'Donoghue, Konrad Dybcio
Cc: Ajit Pandey, Imran Shaik, Taniya Das, linux-arm-msm, linux-clk,
devicetree, linux-kernel, Jagadeesh Kona, Konrad Dybcio
In-Reply-To: <20260331-purwa-videocc-camcc-v3-0-6daca180a4b1@oss.qualcomm.com>
Add support for camera QDSS debug clocks on X1E80100 platform which
are required to be voted for camera icp and cpas usecases. This change
aligns the camcc driver to the new ABI exposed from X1E80100 camcc
bindings that supports these camcc QDSS debug clocks.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Jagadeesh Kona <jagadeesh.kona@oss.qualcomm.com>
---
drivers/clk/qcom/camcc-x1e80100.c | 64 +++++++++++++++++++++++++++++++++++++++
1 file changed, 64 insertions(+)
diff --git a/drivers/clk/qcom/camcc-x1e80100.c b/drivers/clk/qcom/camcc-x1e80100.c
index cbcc1c9fcb341e51272f5595f574f9cb7ef2b52e..7e3fc7aee854eee841176a1330f97dc91af91670 100644
--- a/drivers/clk/qcom/camcc-x1e80100.c
+++ b/drivers/clk/qcom/camcc-x1e80100.c
@@ -1052,6 +1052,31 @@ static struct clk_rcg2 cam_cc_mclk7_clk_src = {
},
};
+static const struct freq_tbl ftbl_cam_cc_qdss_debug_clk_src[] = {
+ F(19200000, P_BI_TCXO, 1, 0, 0),
+ F(60000000, P_CAM_CC_PLL8_OUT_EVEN, 8, 0, 0),
+ F(75000000, P_CAM_CC_PLL0_OUT_EVEN, 8, 0, 0),
+ F(150000000, P_CAM_CC_PLL0_OUT_EVEN, 4, 0, 0),
+ F(300000000, P_CAM_CC_PLL0_OUT_MAIN, 4, 0, 0),
+ { }
+};
+
+static struct clk_rcg2 cam_cc_qdss_debug_clk_src = {
+ .cmd_rcgr = 0x13938,
+ .mnd_width = 0,
+ .hid_width = 5,
+ .parent_map = cam_cc_parent_map_0,
+ .freq_tbl = ftbl_cam_cc_qdss_debug_clk_src,
+ .hw_clk_ctrl = true,
+ .clkr.hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_qdss_debug_clk_src",
+ .parent_data = cam_cc_parent_data_0,
+ .num_parents = ARRAY_SIZE(cam_cc_parent_data_0),
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_shared_ops,
+ },
+};
+
static const struct freq_tbl ftbl_cam_cc_sfe_0_clk_src[] = {
F(345600000, P_CAM_CC_PLL6_OUT_EVEN, 1, 0, 0),
F(432000000, P_CAM_CC_PLL6_OUT_EVEN, 1, 0, 0),
@@ -2182,6 +2207,42 @@ static struct clk_branch cam_cc_mclk7_clk = {
},
};
+static struct clk_branch cam_cc_qdss_debug_clk = {
+ .halt_reg = 0x13a64,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x13a64,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_qdss_debug_clk",
+ .parent_hws = (const struct clk_hw*[]) {
+ &cam_cc_qdss_debug_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_qdss_debug_xo_clk = {
+ .halt_reg = 0x13a68,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x13a68,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "cam_cc_qdss_debug_xo_clk",
+ .parent_hws = (const struct clk_hw*[]) {
+ &cam_cc_xo_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
static struct clk_branch cam_cc_sfe_0_clk = {
.halt_reg = 0x133c0,
.halt_check = BRANCH_HALT,
@@ -2398,6 +2459,9 @@ static struct clk_regmap *cam_cc_x1e80100_clocks[] = {
[CAM_CC_PLL6_OUT_EVEN] = &cam_cc_pll6_out_even.clkr,
[CAM_CC_PLL8] = &cam_cc_pll8.clkr,
[CAM_CC_PLL8_OUT_EVEN] = &cam_cc_pll8_out_even.clkr,
+ [CAM_CC_QDSS_DEBUG_CLK] = &cam_cc_qdss_debug_clk.clkr,
+ [CAM_CC_QDSS_DEBUG_CLK_SRC] = &cam_cc_qdss_debug_clk_src.clkr,
+ [CAM_CC_QDSS_DEBUG_XO_CLK] = &cam_cc_qdss_debug_xo_clk.clkr,
[CAM_CC_SFE_0_CLK] = &cam_cc_sfe_0_clk.clkr,
[CAM_CC_SFE_0_CLK_SRC] = &cam_cc_sfe_0_clk_src.clkr,
[CAM_CC_SFE_0_FAST_AHB_CLK] = &cam_cc_sfe_0_fast_ahb_clk.clkr,
--
2.34.1
^ permalink raw reply related
* [PATCH v3 3/7] clk: qcom: videocc-x1p42100: Add support for video clock controller
From: Jagadeesh Kona @ 2026-03-31 5:24 UTC (permalink / raw)
To: Bjorn Andersson, Michael Turquette, Stephen Boyd, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Jagadeesh Kona,
Bryan O'Donoghue, Konrad Dybcio
Cc: Ajit Pandey, Imran Shaik, Taniya Das, linux-arm-msm, linux-clk,
devicetree, linux-kernel, Jagadeesh Kona, Konrad Dybcio
In-Reply-To: <20260331-purwa-videocc-camcc-v3-0-6daca180a4b1@oss.qualcomm.com>
Add support for the video clock controller for video clients to be
able to request for videocc clocks on X1P42100 platform. Although
X1P42100 is derived from X1E80100, the video clock controller differs
significantly. The BSE clocks are newly added, several cdiv clocks have
been removed, and most RCG frequency tables have been updated. Initial
PLL configurations also require changes, hence introduce a separate
videocc driver for X1P42100 platform.
Reviewed-by: Taniya Das <taniya.das@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Jagadeesh Kona <jagadeesh.kona@oss.qualcomm.com>
---
drivers/clk/qcom/Kconfig | 10 +
drivers/clk/qcom/Makefile | 1 +
drivers/clk/qcom/videocc-x1p42100.c | 585 ++++++++++++++++++++++++++++++++++++
3 files changed, 596 insertions(+)
diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
index 8f55f10261ec2dd4add61101c5619cc4516f7d66..920d5e78e57d1ac62b59eb1c39d1f79c0718abb8 100644
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
@@ -199,6 +199,16 @@ config CLK_X1P42100_GPUCC
Say Y if you want to support graphics controller devices and
functionality such as 3D graphics.
+config CLK_X1P42100_VIDEOCC
+ tristate "X1P42100 Video Clock Controller"
+ depends on ARM64 || COMPILE_TEST
+ select CLK_X1E80100_GCC
+ help
+ Support for the video clock controller on Qualcomm Technologies, Inc.
+ X1P42100 devices.
+ Say Y if you want to support video devices and functionality such as
+ video encode/decode.
+
config CLK_QCM2290_GPUCC
tristate "QCM2290 Graphics Clock Controller"
depends on ARM64 || COMPILE_TEST
diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
index 103d6c4b860ccbc6b4ad552e9e6af43298a4474d..ae1f3207a20be4c9163a6f7ce9f309f36e80fc6f 100644
--- a/drivers/clk/qcom/Makefile
+++ b/drivers/clk/qcom/Makefile
@@ -41,6 +41,7 @@ obj-$(CONFIG_CLK_X1E80100_GCC) += gcc-x1e80100.o
obj-$(CONFIG_CLK_X1E80100_GPUCC) += gpucc-x1e80100.o
obj-$(CONFIG_CLK_X1E80100_TCSRCC) += tcsrcc-x1e80100.o
obj-$(CONFIG_CLK_X1P42100_GPUCC) += gpucc-x1p42100.o
+obj-$(CONFIG_CLK_X1P42100_VIDEOCC) += videocc-x1p42100.o
obj-$(CONFIG_CLK_QCM2290_GPUCC) += gpucc-qcm2290.o
obj-$(CONFIG_IPQ_APSS_PLL) += apss-ipq-pll.o
obj-$(CONFIG_IPQ_APSS_5424) += apss-ipq5424.o
diff --git a/drivers/clk/qcom/videocc-x1p42100.c b/drivers/clk/qcom/videocc-x1p42100.c
new file mode 100644
index 0000000000000000000000000000000000000000..2bb40ac6fcc57e817ce8f0b6727a571c7c072ffa
--- /dev/null
+++ b/drivers/clk/qcom/videocc-x1p42100.c
@@ -0,0 +1,585 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#include <dt-bindings/clock/qcom,x1p42100-videocc.h>
+
+#include "clk-alpha-pll.h"
+#include "clk-branch.h"
+#include "clk-rcg.h"
+#include "clk-regmap.h"
+#include "clk-regmap-divider.h"
+#include "common.h"
+#include "gdsc.h"
+#include "reset.h"
+
+enum {
+ DT_BI_TCXO,
+};
+
+enum {
+ P_BI_TCXO,
+ P_VIDEO_CC_PLL0_OUT_MAIN,
+ P_VIDEO_CC_PLL1_OUT_MAIN,
+};
+
+static const struct pll_vco lucid_ole_vco[] = {
+ { 249600000, 2300000000, 0 },
+};
+
+/* 420.0 MHz Configuration */
+static const struct alpha_pll_config video_cc_pll0_config = {
+ .l = 0x15,
+ .alpha = 0xe000,
+ .config_ctl_val = 0x20485699,
+ .config_ctl_hi_val = 0x00182261,
+ .config_ctl_hi1_val = 0x82aa299c,
+ .test_ctl_val = 0x00000000,
+ .test_ctl_hi_val = 0x00000003,
+ .test_ctl_hi1_val = 0x00009000,
+ .test_ctl_hi2_val = 0x00000034,
+ .user_ctl_val = 0x00000000,
+ .user_ctl_hi_val = 0x00000005,
+};
+
+static struct clk_alpha_pll video_cc_pll0 = {
+ .offset = 0x0,
+ .config = &video_cc_pll0_config,
+ .vco_table = lucid_ole_vco,
+ .num_vco = ARRAY_SIZE(lucid_ole_vco),
+ .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_LUCID_OLE],
+ .clkr = {
+ .hw.init = &(const struct clk_init_data) {
+ .name = "video_cc_pll0",
+ .parent_data = &(const struct clk_parent_data) {
+ .index = DT_BI_TCXO,
+ },
+ .num_parents = 1,
+ .ops = &clk_alpha_pll_lucid_evo_ops,
+ },
+ },
+};
+
+/* 1050.0 MHz Configuration */
+static const struct alpha_pll_config video_cc_pll1_config = {
+ .l = 0x36,
+ .alpha = 0xb000,
+ .config_ctl_val = 0x20485699,
+ .config_ctl_hi_val = 0x00182261,
+ .config_ctl_hi1_val = 0x82aa299c,
+ .test_ctl_val = 0x00000000,
+ .test_ctl_hi_val = 0x00000003,
+ .test_ctl_hi1_val = 0x00009000,
+ .test_ctl_hi2_val = 0x00000034,
+ .user_ctl_val = 0x00000000,
+ .user_ctl_hi_val = 0x00000005,
+};
+
+static struct clk_alpha_pll video_cc_pll1 = {
+ .offset = 0x1000,
+ .config = &video_cc_pll1_config,
+ .vco_table = lucid_ole_vco,
+ .num_vco = ARRAY_SIZE(lucid_ole_vco),
+ .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_LUCID_OLE],
+ .clkr = {
+ .hw.init = &(const struct clk_init_data) {
+ .name = "video_cc_pll1",
+ .parent_data = &(const struct clk_parent_data) {
+ .index = DT_BI_TCXO,
+ },
+ .num_parents = 1,
+ .ops = &clk_alpha_pll_lucid_evo_ops,
+ },
+ },
+};
+
+static const struct parent_map video_cc_parent_map_0[] = {
+ { P_BI_TCXO, 0 },
+};
+
+static const struct clk_parent_data video_cc_parent_data_0[] = {
+ { .index = DT_BI_TCXO },
+};
+
+static const struct parent_map video_cc_parent_map_1[] = {
+ { P_BI_TCXO, 0 },
+ { P_VIDEO_CC_PLL0_OUT_MAIN, 1 },
+};
+
+static const struct clk_parent_data video_cc_parent_data_1[] = {
+ { .index = DT_BI_TCXO },
+ { .hw = &video_cc_pll0.clkr.hw },
+};
+
+static const struct parent_map video_cc_parent_map_2[] = {
+ { P_BI_TCXO, 0 },
+ { P_VIDEO_CC_PLL1_OUT_MAIN, 1 },
+};
+
+static const struct clk_parent_data video_cc_parent_data_2[] = {
+ { .index = DT_BI_TCXO },
+ { .hw = &video_cc_pll1.clkr.hw },
+};
+
+static const struct freq_tbl ftbl_video_cc_mvs0_bse_clk_src[] = {
+ F(420000000, P_VIDEO_CC_PLL0_OUT_MAIN, 1, 0, 0),
+ F(600000000, P_VIDEO_CC_PLL0_OUT_MAIN, 1, 0, 0),
+ F(670000000, P_VIDEO_CC_PLL0_OUT_MAIN, 1, 0, 0),
+ F(848000000, P_VIDEO_CC_PLL0_OUT_MAIN, 1, 0, 0),
+ F(920000000, P_VIDEO_CC_PLL0_OUT_MAIN, 1, 0, 0),
+ { }
+};
+
+static struct clk_rcg2 video_cc_mvs0_bse_clk_src = {
+ .cmd_rcgr = 0x8154,
+ .mnd_width = 0,
+ .hid_width = 5,
+ .parent_map = video_cc_parent_map_1,
+ .freq_tbl = ftbl_video_cc_mvs0_bse_clk_src,
+ .hw_clk_ctrl = true,
+ .clkr.hw.init = &(const struct clk_init_data) {
+ .name = "video_cc_mvs0_bse_clk_src",
+ .parent_data = video_cc_parent_data_1,
+ .num_parents = ARRAY_SIZE(video_cc_parent_data_1),
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_shared_ops,
+ },
+};
+
+static const struct freq_tbl ftbl_video_cc_mvs0_clk_src[] = {
+ F(210000000, P_VIDEO_CC_PLL0_OUT_MAIN, 2, 0, 0),
+ F(300000000, P_VIDEO_CC_PLL0_OUT_MAIN, 2, 0, 0),
+ F(335000000, P_VIDEO_CC_PLL0_OUT_MAIN, 2, 0, 0),
+ F(424000000, P_VIDEO_CC_PLL0_OUT_MAIN, 2, 0, 0),
+ F(460000000, P_VIDEO_CC_PLL0_OUT_MAIN, 2, 0, 0),
+ { }
+};
+
+static struct clk_rcg2 video_cc_mvs0_clk_src = {
+ .cmd_rcgr = 0x8000,
+ .mnd_width = 0,
+ .hid_width = 5,
+ .parent_map = video_cc_parent_map_1,
+ .freq_tbl = ftbl_video_cc_mvs0_clk_src,
+ .hw_clk_ctrl = true,
+ .clkr.hw.init = &(const struct clk_init_data) {
+ .name = "video_cc_mvs0_clk_src",
+ .parent_data = video_cc_parent_data_1,
+ .num_parents = ARRAY_SIZE(video_cc_parent_data_1),
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_shared_ops,
+ },
+};
+
+static const struct freq_tbl ftbl_video_cc_mvs1_clk_src[] = {
+ F(1050000000, P_VIDEO_CC_PLL1_OUT_MAIN, 1, 0, 0),
+ F(1350000000, P_VIDEO_CC_PLL1_OUT_MAIN, 1, 0, 0),
+ F(1650000000, P_VIDEO_CC_PLL1_OUT_MAIN, 1, 0, 0),
+ { }
+};
+
+static struct clk_rcg2 video_cc_mvs1_clk_src = {
+ .cmd_rcgr = 0x8018,
+ .mnd_width = 0,
+ .hid_width = 5,
+ .parent_map = video_cc_parent_map_2,
+ .freq_tbl = ftbl_video_cc_mvs1_clk_src,
+ .hw_clk_ctrl = true,
+ .clkr.hw.init = &(const struct clk_init_data) {
+ .name = "video_cc_mvs1_clk_src",
+ .parent_data = video_cc_parent_data_2,
+ .num_parents = ARRAY_SIZE(video_cc_parent_data_2),
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_shared_ops,
+ },
+};
+
+static const struct freq_tbl ftbl_video_cc_xo_clk_src[] = {
+ F(19200000, P_BI_TCXO, 1, 0, 0),
+ { }
+};
+
+static struct clk_rcg2 video_cc_xo_clk_src = {
+ .cmd_rcgr = 0x810c,
+ .mnd_width = 0,
+ .hid_width = 5,
+ .parent_map = video_cc_parent_map_0,
+ .freq_tbl = ftbl_video_cc_xo_clk_src,
+ .clkr.hw.init = &(const struct clk_init_data) {
+ .name = "video_cc_xo_clk_src",
+ .parent_data = video_cc_parent_data_0,
+ .num_parents = ARRAY_SIZE(video_cc_parent_data_0),
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_shared_ops,
+ },
+};
+
+static struct clk_regmap_div video_cc_mvs0_bse_div4_div_clk_src = {
+ .reg = 0x817c,
+ .shift = 0,
+ .width = 4,
+ .clkr.hw.init = &(const struct clk_init_data) {
+ .name = "video_cc_mvs0_bse_div4_div_clk_src",
+ .parent_hws = (const struct clk_hw*[]) {
+ &video_cc_mvs0_bse_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_regmap_div_ro_ops,
+ },
+};
+
+static struct clk_regmap_div video_cc_mvs1_div_clk_src = {
+ .reg = 0x80ec,
+ .shift = 0,
+ .width = 4,
+ .clkr.hw.init = &(const struct clk_init_data) {
+ .name = "video_cc_mvs1_div_clk_src",
+ .parent_hws = (const struct clk_hw*[]) {
+ &video_cc_mvs1_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_regmap_div_ro_ops,
+ },
+};
+
+static struct clk_regmap_div video_cc_mvs1c_div2_div_clk_src = {
+ .reg = 0x809c,
+ .shift = 0,
+ .width = 4,
+ .clkr.hw.init = &(const struct clk_init_data) {
+ .name = "video_cc_mvs1c_div2_div_clk_src",
+ .parent_hws = (const struct clk_hw*[]) {
+ &video_cc_mvs1_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_regmap_div_ro_ops,
+ },
+};
+
+static struct clk_branch video_cc_mvs0_bse_clk = {
+ .halt_reg = 0x8170,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x8170,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "video_cc_mvs0_bse_clk",
+ .parent_hws = (const struct clk_hw*[]) {
+ &video_cc_mvs0_bse_div4_div_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch video_cc_mvs0_clk = {
+ .halt_reg = 0x80b8,
+ .halt_check = BRANCH_HALT_VOTED,
+ .hwcg_reg = 0x80b8,
+ .hwcg_bit = 1,
+ .clkr = {
+ .enable_reg = 0x80b8,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "video_cc_mvs0_clk",
+ .parent_hws = (const struct clk_hw*[]) {
+ &video_cc_mvs0_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch video_cc_mvs0_shift_clk = {
+ .halt_reg = 0x8128,
+ .halt_check = BRANCH_HALT_VOTED,
+ .clkr = {
+ .enable_reg = 0x8128,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "video_cc_mvs0_shift_clk",
+ .parent_hws = (const struct clk_hw*[]) {
+ &video_cc_xo_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch video_cc_mvs0c_clk = {
+ .halt_reg = 0x8064,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x8064,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "video_cc_mvs0c_clk",
+ .parent_hws = (const struct clk_hw*[]) {
+ &video_cc_mvs0_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch video_cc_mvs0c_shift_clk = {
+ .halt_reg = 0x812c,
+ .halt_check = BRANCH_HALT_VOTED,
+ .clkr = {
+ .enable_reg = 0x812c,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "video_cc_mvs0c_shift_clk",
+ .parent_hws = (const struct clk_hw*[]) {
+ &video_cc_xo_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch video_cc_mvs1_clk = {
+ .halt_reg = 0x80e0,
+ .halt_check = BRANCH_HALT_VOTED,
+ .hwcg_reg = 0x80e0,
+ .hwcg_bit = 1,
+ .clkr = {
+ .enable_reg = 0x80e0,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "video_cc_mvs1_clk",
+ .parent_hws = (const struct clk_hw*[]) {
+ &video_cc_mvs1_div_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch video_cc_mvs1_shift_clk = {
+ .halt_reg = 0x8130,
+ .halt_check = BRANCH_HALT_VOTED,
+ .clkr = {
+ .enable_reg = 0x8130,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "video_cc_mvs1_shift_clk",
+ .parent_hws = (const struct clk_hw*[]) {
+ &video_cc_xo_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch video_cc_mvs1c_clk = {
+ .halt_reg = 0x8090,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x8090,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "video_cc_mvs1c_clk",
+ .parent_hws = (const struct clk_hw*[]) {
+ &video_cc_mvs1c_div2_div_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch video_cc_mvs1c_shift_clk = {
+ .halt_reg = 0x8134,
+ .halt_check = BRANCH_HALT_VOTED,
+ .clkr = {
+ .enable_reg = 0x8134,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "video_cc_mvs1c_shift_clk",
+ .parent_hws = (const struct clk_hw*[]) {
+ &video_cc_xo_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct gdsc video_cc_mvs0c_gdsc = {
+ .gdscr = 0x804c,
+ .en_rest_wait_val = 0x2,
+ .en_few_wait_val = 0x2,
+ .clk_dis_wait_val = 0x6,
+ .pd = {
+ .name = "video_cc_mvs0c_gdsc",
+ },
+ .pwrsts = PWRSTS_OFF_ON,
+ .flags = POLL_CFG_GDSCR | RETAIN_FF_ENABLE,
+};
+
+static struct gdsc video_cc_mvs0_gdsc = {
+ .gdscr = 0x80a4,
+ .en_rest_wait_val = 0x2,
+ .en_few_wait_val = 0x2,
+ .clk_dis_wait_val = 0x6,
+ .pd = {
+ .name = "video_cc_mvs0_gdsc",
+ },
+ .pwrsts = PWRSTS_OFF_ON,
+ .parent = &video_cc_mvs0c_gdsc.pd,
+ .flags = HW_CTRL_TRIGGER | POLL_CFG_GDSCR | RETAIN_FF_ENABLE,
+};
+
+static struct gdsc video_cc_mvs1c_gdsc = {
+ .gdscr = 0x8078,
+ .en_rest_wait_val = 0x2,
+ .en_few_wait_val = 0x2,
+ .clk_dis_wait_val = 0xf,
+ .pd = {
+ .name = "video_cc_mvs1c_gdsc",
+ },
+ .pwrsts = PWRSTS_OFF_ON,
+ .flags = POLL_CFG_GDSCR | RETAIN_FF_ENABLE,
+};
+
+static struct gdsc video_cc_mvs1_gdsc = {
+ .gdscr = 0x80cc,
+ .en_rest_wait_val = 0x2,
+ .en_few_wait_val = 0x2,
+ .clk_dis_wait_val = 0xf,
+ .pd = {
+ .name = "video_cc_mvs1_gdsc",
+ },
+ .pwrsts = PWRSTS_OFF_ON,
+ .parent = &video_cc_mvs1c_gdsc.pd,
+ .flags = HW_CTRL_TRIGGER | POLL_CFG_GDSCR | RETAIN_FF_ENABLE,
+};
+
+static struct clk_regmap *video_cc_x1p42100_clocks[] = {
+ [VIDEO_CC_MVS0_BSE_CLK] = &video_cc_mvs0_bse_clk.clkr,
+ [VIDEO_CC_MVS0_BSE_CLK_SRC] = &video_cc_mvs0_bse_clk_src.clkr,
+ [VIDEO_CC_MVS0_BSE_DIV4_DIV_CLK_SRC] = &video_cc_mvs0_bse_div4_div_clk_src.clkr,
+ [VIDEO_CC_MVS0_CLK] = &video_cc_mvs0_clk.clkr,
+ [VIDEO_CC_MVS0_CLK_SRC] = &video_cc_mvs0_clk_src.clkr,
+ [VIDEO_CC_MVS0_SHIFT_CLK] = &video_cc_mvs0_shift_clk.clkr,
+ [VIDEO_CC_MVS0C_CLK] = &video_cc_mvs0c_clk.clkr,
+ [VIDEO_CC_MVS0C_SHIFT_CLK] = &video_cc_mvs0c_shift_clk.clkr,
+ [VIDEO_CC_MVS1_CLK] = &video_cc_mvs1_clk.clkr,
+ [VIDEO_CC_MVS1_CLK_SRC] = &video_cc_mvs1_clk_src.clkr,
+ [VIDEO_CC_MVS1_DIV_CLK_SRC] = &video_cc_mvs1_div_clk_src.clkr,
+ [VIDEO_CC_MVS1_SHIFT_CLK] = &video_cc_mvs1_shift_clk.clkr,
+ [VIDEO_CC_MVS1C_CLK] = &video_cc_mvs1c_clk.clkr,
+ [VIDEO_CC_MVS1C_DIV2_DIV_CLK_SRC] = &video_cc_mvs1c_div2_div_clk_src.clkr,
+ [VIDEO_CC_MVS1C_SHIFT_CLK] = &video_cc_mvs1c_shift_clk.clkr,
+ [VIDEO_CC_PLL0] = &video_cc_pll0.clkr,
+ [VIDEO_CC_PLL1] = &video_cc_pll1.clkr,
+ [VIDEO_CC_XO_CLK_SRC] = &video_cc_xo_clk_src.clkr,
+};
+
+static struct gdsc *video_cc_x1p42100_gdscs[] = {
+ [VIDEO_CC_MVS0_GDSC] = &video_cc_mvs0_gdsc,
+ [VIDEO_CC_MVS0C_GDSC] = &video_cc_mvs0c_gdsc,
+ [VIDEO_CC_MVS1_GDSC] = &video_cc_mvs1_gdsc,
+ [VIDEO_CC_MVS1C_GDSC] = &video_cc_mvs1c_gdsc,
+};
+
+static const struct qcom_reset_map video_cc_x1p42100_resets[] = {
+ [CVP_VIDEO_CC_INTERFACE_BCR] = { 0x80f0 },
+ [CVP_VIDEO_CC_MVS0_BCR] = { 0x80a0 },
+ [CVP_VIDEO_CC_MVS0C_BCR] = { 0x8048 },
+ [CVP_VIDEO_CC_MVS1_BCR] = { 0x80c8 },
+ [CVP_VIDEO_CC_MVS1C_BCR] = { 0x8074 },
+ [VIDEO_CC_MVS0_BSE_BCR] = { 0x816c },
+ [VIDEO_CC_MVS0C_CLK_ARES] = { 0x8064, 2 },
+ [VIDEO_CC_MVS1C_CLK_ARES] = { 0x8090, 2 },
+ [VIDEO_CC_XO_CLK_ARES] = { 0x8124, 2 },
+};
+
+static struct clk_alpha_pll *video_cc_x1p42100_plls[] = {
+ &video_cc_pll0,
+ &video_cc_pll1,
+};
+
+static u32 video_cc_x1p42100_critical_cbcrs[] = {
+ 0x80f4, /* VIDEO_CC_AHB_CLK */
+ 0x8150, /* VIDEO_CC_SLEEP_CLK */
+ 0x8124, /* VIDEO_CC_XO_CLK */
+};
+
+static const struct regmap_config video_cc_x1p42100_regmap_config = {
+ .reg_bits = 32,
+ .reg_stride = 4,
+ .val_bits = 32,
+ .max_register = 0x9f54,
+ .fast_io = true,
+};
+
+static struct qcom_cc_driver_data video_cc_x1p42100_driver_data = {
+ .alpha_plls = video_cc_x1p42100_plls,
+ .num_alpha_plls = ARRAY_SIZE(video_cc_x1p42100_plls),
+ .clk_cbcrs = video_cc_x1p42100_critical_cbcrs,
+ .num_clk_cbcrs = ARRAY_SIZE(video_cc_x1p42100_critical_cbcrs),
+};
+
+static const struct qcom_cc_desc video_cc_x1p42100_desc = {
+ .config = &video_cc_x1p42100_regmap_config,
+ .clks = video_cc_x1p42100_clocks,
+ .num_clks = ARRAY_SIZE(video_cc_x1p42100_clocks),
+ .resets = video_cc_x1p42100_resets,
+ .num_resets = ARRAY_SIZE(video_cc_x1p42100_resets),
+ .gdscs = video_cc_x1p42100_gdscs,
+ .num_gdscs = ARRAY_SIZE(video_cc_x1p42100_gdscs),
+ .use_rpm = true,
+ .driver_data = &video_cc_x1p42100_driver_data,
+};
+
+static const struct of_device_id video_cc_x1p42100_match_table[] = {
+ { .compatible = "qcom,x1p42100-videocc" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, video_cc_x1p42100_match_table);
+
+static int video_cc_x1p42100_probe(struct platform_device *pdev)
+{
+ return qcom_cc_probe(pdev, &video_cc_x1p42100_desc);
+}
+
+static struct platform_driver video_cc_x1p42100_driver = {
+ .probe = video_cc_x1p42100_probe,
+ .driver = {
+ .name = "videocc-x1p42100",
+ .of_match_table = video_cc_x1p42100_match_table,
+ },
+};
+
+module_platform_driver(video_cc_x1p42100_driver);
+
+MODULE_DESCRIPTION("QTI VIDEOCC X1P42100 Driver");
+MODULE_LICENSE("GPL");
--
2.34.1
^ permalink raw reply related
* [PATCH v3 2/7] dt-bindings: clock: qcom: Add X1P42100 camera clock controller
From: Jagadeesh Kona @ 2026-03-31 5:24 UTC (permalink / raw)
To: Bjorn Andersson, Michael Turquette, Stephen Boyd, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Jagadeesh Kona,
Bryan O'Donoghue, Konrad Dybcio
Cc: Ajit Pandey, Imran Shaik, Taniya Das, linux-arm-msm, linux-clk,
devicetree, linux-kernel, Jagadeesh Kona, Krzysztof Kozlowski
In-Reply-To: <20260331-purwa-videocc-camcc-v3-0-6daca180a4b1@oss.qualcomm.com>
Add X1P42100 camera clock controller support and clock bindings
for camera QDSS debug clocks which are applicable for both X1E80100
and X1P42100 platforms.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Jagadeesh Kona <jagadeesh.kona@oss.qualcomm.com>
---
Documentation/devicetree/bindings/clock/qcom,x1e80100-camcc.yaml | 1 +
include/dt-bindings/clock/qcom,x1e80100-camcc.h | 3 +++
2 files changed, 4 insertions(+)
diff --git a/Documentation/devicetree/bindings/clock/qcom,x1e80100-camcc.yaml b/Documentation/devicetree/bindings/clock/qcom,x1e80100-camcc.yaml
index 938a2f1ff3fca899b5708101df7f8aa07e943336..b28614186cc098268ab0d8c32b21d9dd9508c9f9 100644
--- a/Documentation/devicetree/bindings/clock/qcom,x1e80100-camcc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,x1e80100-camcc.yaml
@@ -23,6 +23,7 @@ properties:
compatible:
enum:
- qcom,x1e80100-camcc
+ - qcom,x1p42100-camcc
reg:
maxItems: 1
diff --git a/include/dt-bindings/clock/qcom,x1e80100-camcc.h b/include/dt-bindings/clock/qcom,x1e80100-camcc.h
index d72fdfb06a7c716ed2ec376e061e4f0ca35f42c5..06c316022fb0d26ec6243b28477564d97f228c8e 100644
--- a/include/dt-bindings/clock/qcom,x1e80100-camcc.h
+++ b/include/dt-bindings/clock/qcom,x1e80100-camcc.h
@@ -115,6 +115,9 @@
#define CAM_CC_SLEEP_CLK_SRC 105
#define CAM_CC_SLOW_AHB_CLK_SRC 106
#define CAM_CC_XO_CLK_SRC 107
+#define CAM_CC_QDSS_DEBUG_CLK 108
+#define CAM_CC_QDSS_DEBUG_CLK_SRC 109
+#define CAM_CC_QDSS_DEBUG_XO_CLK 110
/* CAM_CC power domains */
#define CAM_CC_BPS_GDSC 0
--
2.34.1
^ permalink raw reply related
* [PATCH v3 1/7] dt-bindings: clock: qcom: Add X1P42100 video clock controller
From: Jagadeesh Kona @ 2026-03-31 5:24 UTC (permalink / raw)
To: Bjorn Andersson, Michael Turquette, Stephen Boyd, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Jagadeesh Kona,
Bryan O'Donoghue, Konrad Dybcio
Cc: Ajit Pandey, Imran Shaik, Taniya Das, linux-arm-msm, linux-clk,
devicetree, linux-kernel, Jagadeesh Kona
In-Reply-To: <20260331-purwa-videocc-camcc-v3-0-6daca180a4b1@oss.qualcomm.com>
Add device tree bindings for the video clock controller on Qualcomm
X1P42100 (Purwa) SoC.
Signed-off-by: Jagadeesh Kona <jagadeesh.kona@oss.qualcomm.com>
---
.../bindings/clock/qcom,sm8450-videocc.yaml | 3 ++
include/dt-bindings/clock/qcom,x1p42100-videocc.h | 48 ++++++++++++++++++++++
2 files changed, 51 insertions(+)
diff --git a/Documentation/devicetree/bindings/clock/qcom,sm8450-videocc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm8450-videocc.yaml
index 7bbf120d928cc506a4f7aaeaa1c24e5da760e450..5d77029bfaf8830e2bc0c3b8f323c818ee48dba2 100644
--- a/Documentation/devicetree/bindings/clock/qcom,sm8450-videocc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,sm8450-videocc.yaml
@@ -20,6 +20,7 @@ description: |
include/dt-bindings/clock/qcom,sm8450-videocc.h
include/dt-bindings/clock/qcom,sm8650-videocc.h
include/dt-bindings/clock/qcom,sm8750-videocc.h
+ include/dt-bindings/clock/qcom,x1p42100-videocc.h
properties:
compatible:
@@ -32,6 +33,7 @@ properties:
- qcom,sm8650-videocc
- qcom,sm8750-videocc
- qcom,x1e80100-videocc
+ - qcom,x1p42100-videocc
clocks:
items:
@@ -70,6 +72,7 @@ allOf:
- qcom,sm8450-videocc
- qcom,sm8550-videocc
- qcom,sm8750-videocc
+ - qcom,x1p42100-videocc
then:
required:
- required-opps
diff --git a/include/dt-bindings/clock/qcom,x1p42100-videocc.h b/include/dt-bindings/clock/qcom,x1p42100-videocc.h
new file mode 100644
index 0000000000000000000000000000000000000000..996408d1a0c32e175e5d4dd65c09bdc8dd47dacf
--- /dev/null
+++ b/include/dt-bindings/clock/qcom,x1p42100-videocc.h
@@ -0,0 +1,48 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
+ */
+
+#ifndef _DT_BINDINGS_CLK_QCOM_VIDEO_CC_X1P42100_H
+#define _DT_BINDINGS_CLK_QCOM_VIDEO_CC_X1P42100_H
+
+/* VIDEO_CC clocks */
+#define VIDEO_CC_MVS0_CLK 0
+#define VIDEO_CC_MVS0_CLK_SRC 1
+#define VIDEO_CC_MVS0_DIV_CLK_SRC 2
+#define VIDEO_CC_MVS0C_CLK 3
+#define VIDEO_CC_MVS0C_DIV2_DIV_CLK_SRC 4
+#define VIDEO_CC_MVS1_CLK 5
+#define VIDEO_CC_MVS1_CLK_SRC 6
+#define VIDEO_CC_MVS1_DIV_CLK_SRC 7
+#define VIDEO_CC_MVS1C_CLK 8
+#define VIDEO_CC_MVS1C_DIV2_DIV_CLK_SRC 9
+#define VIDEO_CC_PLL0 10
+#define VIDEO_CC_PLL1 11
+#define VIDEO_CC_MVS0_SHIFT_CLK 12
+#define VIDEO_CC_MVS0C_SHIFT_CLK 13
+#define VIDEO_CC_MVS1_SHIFT_CLK 14
+#define VIDEO_CC_MVS1C_SHIFT_CLK 15
+#define VIDEO_CC_XO_CLK_SRC 16
+#define VIDEO_CC_MVS0_BSE_CLK 17
+#define VIDEO_CC_MVS0_BSE_CLK_SRC 18
+#define VIDEO_CC_MVS0_BSE_DIV4_DIV_CLK_SRC 19
+
+/* VIDEO_CC power domains */
+#define VIDEO_CC_MVS0C_GDSC 0
+#define VIDEO_CC_MVS0_GDSC 1
+#define VIDEO_CC_MVS1C_GDSC 2
+#define VIDEO_CC_MVS1_GDSC 3
+
+/* VIDEO_CC resets */
+#define CVP_VIDEO_CC_INTERFACE_BCR 0
+#define CVP_VIDEO_CC_MVS0_BCR 1
+#define CVP_VIDEO_CC_MVS0C_BCR 2
+#define CVP_VIDEO_CC_MVS1_BCR 3
+#define CVP_VIDEO_CC_MVS1C_BCR 4
+#define VIDEO_CC_MVS0C_CLK_ARES 5
+#define VIDEO_CC_MVS1C_CLK_ARES 6
+#define VIDEO_CC_XO_CLK_ARES 7
+#define VIDEO_CC_MVS0_BSE_BCR 8
+
+#endif
--
2.34.1
^ permalink raw reply related
* [PATCH v3 0/7] Add support for videocc and camcc on X1P42100 platform
From: Jagadeesh Kona @ 2026-03-31 5:24 UTC (permalink / raw)
To: Bjorn Andersson, Michael Turquette, Stephen Boyd, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Jagadeesh Kona,
Bryan O'Donoghue, Konrad Dybcio
Cc: Ajit Pandey, Imran Shaik, Taniya Das, linux-arm-msm, linux-clk,
devicetree, linux-kernel, Jagadeesh Kona, Krzysztof Kozlowski,
Konrad Dybcio, Vladimir Zapolskiy, Abel Vesa
Add support for video and camera clock controllers on
X1P42100 platform.
The purwa(X1P42100) platform includes the hamoa dtsi file
and camcc node is already posted upstream on hamoa(X1E80100)
platform in Bryan's series[1]. Hence included the camcc node
patch[PATCH 06/15] from Bryan's series[1] and extended it for
purwa(X1P42100).
[1]: https://lore.kernel.org/all/20250711-b4-linux-next-25-03-13-dtsi-x1e80100-camss-v7-6-0bc5da82f526@linaro.org/
The camcc node was added in x1e80100.dtsi in above Bryan's series
but moved it to hamoa.dtsi in this series to align as per the latest
changes.
The series also adds the camera QDSS debug clocks support for X1E80100.
This change updates the X1E80100 camcc ABI, so X1E80100 camcc bindings
and driver changes need to be picked together.
Signed-off-by: Jagadeesh Kona <jagadeesh.kona@oss.qualcomm.com>
---
Changes in v3:
- Added a sepearate new header for Purwa videocc
- Dropped the fixes tags added in v2, since no user observable bug
- Updated the commit text for few patches
- Added R-By tags recieved on v2
- Link to v2: https://lore.kernel.org/r/20260304-purwa-videocc-camcc-v2-0-dbbd2d258bd6@oss.qualcomm.com
Changes in v2:
- Dropped new header file for X1P42100 videocc and included
additional clocks and resets in SM8650 videocc header file
- Updated commit text for videocc and camcc driver patches
- Squashed Purwa videocc & camcc DT compatible update into previous
camcc node patch based on review comments
- Added R-By tags received on v1
- Added Fixes tags based on review comments
- Link to v1: https://lore.kernel.org/r/20260128-purwa-videocc-camcc-v1-0-b23de57df5ba@oss.qualcomm.com
---
Bryan O'Donoghue (1):
arm64: dts: qcom: x1e80100: Add CAMCC block definition
Jagadeesh Kona (6):
dt-bindings: clock: qcom: Add X1P42100 video clock controller
dt-bindings: clock: qcom: Add X1P42100 camera clock controller
clk: qcom: videocc-x1p42100: Add support for video clock controller
clk: qcom: camcc-x1e80100: Add support for camera QDSS debug clocks
clk: qcom: camcc-x1p42100: Add support for camera clock controller
arm64: defconfig: Enable VIDEOCC and CAMCC drivers on Qualcomm X1P42100
.../bindings/clock/qcom,sm8450-videocc.yaml | 3 +
.../bindings/clock/qcom,x1e80100-camcc.yaml | 1 +
arch/arm64/boot/dts/qcom/hamoa.dtsi | 16 +
arch/arm64/boot/dts/qcom/purwa.dtsi | 10 +
arch/arm64/configs/defconfig | 2 +
drivers/clk/qcom/Kconfig | 20 +
drivers/clk/qcom/Makefile | 2 +
drivers/clk/qcom/camcc-x1e80100.c | 64 +
drivers/clk/qcom/camcc-x1p42100.c | 2223 ++++++++++++++++++++
drivers/clk/qcom/videocc-x1p42100.c | 585 ++++++
include/dt-bindings/clock/qcom,x1e80100-camcc.h | 3 +
include/dt-bindings/clock/qcom,x1p42100-videocc.h | 48 +
12 files changed, 2977 insertions(+)
---
base-commit: cf7c3c02fdd0dfccf4d6611714273dcb538af2cb
change-id: 20260331-purwa-videocc-camcc-d9700d0f797d
Best regards,
--
Jagadeesh Kona <jagadeesh.kona@oss.qualcomm.com>
^ permalink raw reply
* [PATCH v1 1/2] dt-bindings: riscv: spacemit: add deepcomputing,fml13v05
From: Sandie Cao @ 2026-03-31 3:45 UTC (permalink / raw)
To: Conor Dooley
Cc: Emil Renner Berthing, Rob Herring, Krzysztof Kozlowski, Yixun Lan,
Paul Walmsley, Palmer Dabbelt, Albert Ou, Heinrich Schuchardt,
Troy Mitchell, Michael Opdenacker, Guodong Xu, Hendrik Hamerlinck,
Yangyu Chen, spacemit, linux-riscv, devicetree, linux-kernel,
sandiecao
In-Reply-To: <20260331034423.67142-1-sandie.cao@deepcomputing.io>
From: sandiecao <sandie.cao@deepcomputing.io>
Document the compatible string for the Deepcomputing fml13v05.
It's based on the SpacemiT K3 RISC-V SoC and is designed for the Framework
Laptop 13 Chassis, which has (Framework) SKU FRANHQ0001.
Signed-off-by: sandiecao <sandie.cao@deepcomputing.io>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
---
Documentation/devicetree/bindings/riscv/spacemit.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/riscv/spacemit.yaml b/Documentation/devicetree/bindings/riscv/spacemit.yaml
index b958b94a924d..af8030242bdc 100644
--- a/Documentation/devicetree/bindings/riscv/spacemit.yaml
+++ b/Documentation/devicetree/bindings/riscv/spacemit.yaml
@@ -29,6 +29,7 @@ properties:
- const: spacemit,k1
- items:
- enum:
+ - deepcomputing,fml13v05
- spacemit,k3-pico-itx
- const: spacemit,k3
--
2.43.0
^ permalink raw reply related
* Re: [PATCH v1 2/2] riscv: dts: spacemit: add DeepComputing FML13V05 board device tree
From: Troy Mitchell @ 2026-03-31 3:50 UTC (permalink / raw)
To: Sandie Cao, Conor Dooley
Cc: Emil Renner Berthing, Rob Herring, Krzysztof Kozlowski, Yixun Lan,
Paul Walmsley, Palmer Dabbelt, Albert Ou, Heinrich Schuchardt,
Troy Mitchell, Michael Opdenacker, Guodong Xu, Hendrik Hamerlinck,
Yangyu Chen, spacemit, linux-riscv, devicetree, linux-kernel
In-Reply-To: <20260331034616.67183-1-sandie.cao@deepcomputing.io>
On Tue Mar 31, 2026 at 11:46 AM CST, Sandie Cao wrote:
> From: sandiecao <sandie.cao@deepcomputing.io>
>
> The FML13V05 board from DeepComputing incorporates a SpacemiT K3 RISC-V
> SoC.It is a mainboard designed for the Framework Laptop 13 Chassis,
> which has (Framework) SKU FRANHQ0001.
>
> The FML13V05 board features:
> - SpacemiT K3 RISC-V SoC
> - LPDDR5 16GB or 32GB
> - eMMC 32GB ~128GB (Optional)
> - UFS 3.1 256G (Optional)
> - QSPI Flash
> - MicroSD Slot
> - PCIe-based Wi-Fi
> - 4 USB-C Ports
> - Port 1: PD 3.0 (65W Max), USB 3.2 Gen 1
> - Port 2: PD 3.0 (65W Max), USB 3.2 Gen 1, DP 1.4 (4K@60Hz)
> - Port 3 & 4: USB 3.2 Gen 1
>
> This minimal device tree enables booting into a serial console with UART
> output.
>
> Signed-off-by: sandiecao <sandie.cao@deepcomputing.io>
> Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Troy Mitchell <troy.mitchell@linux.spacemit.com>
^ permalink raw reply
* [PATCH v1 0/2] Add DeepComputing FML13V05 board dts
From: Sandie Cao @ 2026-03-31 3:44 UTC (permalink / raw)
To: Conor Dooley
Cc: Emil Renner Berthing, Rob Herring, Krzysztof Kozlowski, Yixun Lan,
Paul Walmsley, Palmer Dabbelt, Albert Ou, Heinrich Schuchardt,
Troy Mitchell, Michael Opdenacker, Guodong Xu, Hendrik Hamerlinck,
Yangyu Chen, spacemit, linux-riscv, devicetree, linux-kernel,
Sandie Cao
This series updates Device Tree related files to introduce the
FML13V05 board from DeepComputing, which incorporates a Spacemit
K3 SoC. This board is designed for use on the Framework Laptop 13
Chassis, which has (Framework) SKU FRANHQ0001.
The series is based on riscv-dt-for-next.
sandiecao (2):
dt-bindings: riscv: spacemit: add deepcomputing,fml13v05
riscv: dts: spacemit: add DeepComputing FML13V05 board device tree
.../devicetree/bindings/riscv/spacemit.yaml | 1 +
arch/riscv/boot/dts/spacemit/Makefile | 1 +
.../spacemit/k3-deepcomputing-fml13v05.dts | 28 +++++++++++++++++++
3 files changed, 30 insertions(+)
create mode 100644 arch/riscv/boot/dts/spacemit/k3-deepcomputing-fml13v05.dts
base-commit: 4a1739c30fc66a59450c1f78923f94607e786882
--
2.43.0
^ permalink raw reply
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox