* [PATCH v3 2/2] mmc: dw_mmc: exynos: increase DMA threshold value for exynos7870
From: Kaustabh Chakraborty @ 2026-04-15 15:02 UTC (permalink / raw)
To: Ulf Hansson, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Jaehoon Chung, Shawn Lin, Krzysztof Kozlowski, Alim Akhtar
Cc: linux-mmc, devicetree, linux-kernel, linux-arm-kernel,
linux-samsung-soc, Kaustabh Chakraborty
In-Reply-To: <20260415-dwmmc-dma-thr-v3-0-31014d36b6ee@disroot.org>
Exynos 7870 compatible controllers, such as SDIO ones are not able to
perform DMA transfers for small sizes of data (~16 to ~512 bytes),
resulting in cache issues in subsequent transfers. Increase the DMA
transfer threshold to 512 to allow the shorter transfers to take place,
bypassing DMA.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
---
drivers/mmc/host/dw_mmc-exynos.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/mmc/host/dw_mmc-exynos.c b/drivers/mmc/host/dw_mmc-exynos.c
index 261344d3a8cfe..4b76b997ddc15 100644
--- a/drivers/mmc/host/dw_mmc-exynos.c
+++ b/drivers/mmc/host/dw_mmc-exynos.c
@@ -141,6 +141,7 @@ static int dw_mci_exynos_priv_init(struct dw_mci *host)
priv->ctrl_type == DW_MCI_TYPE_EXYNOS7870_SMU) {
/* Quirk needed for certain Exynos SoCs */
host->quirks |= DW_MMC_QUIRK_FIFO64_32;
+ host->dma_threshold = 512;
}
if (priv->ctrl_type == DW_MCI_TYPE_ARTPEC8) {
--
2.53.0
^ permalink raw reply related
* Re: [PATCH RFC 4/4] arm64: dts: qcom: Enable GPU & GMU on Glymur CRD
From: Rob Clark @ 2026-04-15 15:04 UTC (permalink / raw)
To: Konrad Dybcio
Cc: Akhil P Oommen, Bjorn Andersson, Konrad Dybcio, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Sean Paul, Dmitry Baryshkov,
Abhinav Kumar, Jessica Zhang, Marijn Suijten, David Airlie,
Simona Vetter, Maarten Lankhorst, Maxime Ripard,
Thomas Zimmermann, linux-arm-msm, devicetree, linux-kernel,
dri-devel, freedreno
In-Reply-To: <17b2ff60-d2e7-4f88-b2ae-f4dcad44fc33@oss.qualcomm.com>
On Wed, Apr 15, 2026 at 2:12 AM Konrad Dybcio
<konrad.dybcio@oss.qualcomm.com> wrote:
>
> On 4/4/26 11:03 PM, Akhil P Oommen wrote:
> > Enable the necessary DT nodes to add support for GPU on the Glymur CRD.
> > The Glymur CRD boots Linux at EL2, which means it doesn't require the
> > secure GPU firmware (zap fw).
> >
> > Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
> > ---
>
> This isn't a blocker per se, but since there is no more zap, do you
> think we can just enable the GPU and GMU by default (i.e. no status=
> "disabled" in SoC DTSI)?
Agreed.. I'm pretty sure zap was the only reason for disabling by default.
BR,
-R
> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
>
> Konrad
^ permalink raw reply
* Re: [PATCH v4 1/2] dt-bindings: pwm: dwc: add reset optional
From: Conor Dooley @ 2026-04-15 15:09 UTC (permalink / raw)
To: dongxuyang
Cc: ukleinek, robh, krzk+dt, conor+dt, ben-linux, ben.dooks, p.zabel,
linux-pwm, devicetree, linux-kernel, ningyu, linmin, xuxiang,
wangguosheng, pinkesh.vaghela
In-Reply-To: <20260415095020.1597-1-dongxuyang@eswincomputing.com>
[-- Attachment #1: Type: text/plain, Size: 1340 bytes --]
On Wed, Apr 15, 2026 at 05:50:20PM +0800, dongxuyang@eswincomputing.com wrote:
> From: Xuyang Dong <dongxuyang@eswincomputing.com>
>
> The DesignWare PWM includes separate reset signals dedicated to each clock
> domain:
> The presetn signal resets logic in pclk domain.
> The timer_N_resetn signal resets logic in the timer_N_clk domain.
> The resets are active-low.
>
> Signed-off-by: Xuyang Dong <dongxuyang@eswincomputing.com>
This commit implies that your hardware differs from existing devices,
I think you should add a device-specific compatible.
> ---
> .../devicetree/bindings/pwm/snps,dw-apb-timers-pwm2.yaml | 3 +++
> 1 file changed, 3 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/pwm/snps,dw-apb-timers-pwm2.yaml b/Documentation/devicetree/bindings/pwm/snps,dw-apb-timers-pwm2.yaml
> index 7523a89a1773..a8bbad0360f8 100644
> --- a/Documentation/devicetree/bindings/pwm/snps,dw-apb-timers-pwm2.yaml
> +++ b/Documentation/devicetree/bindings/pwm/snps,dw-apb-timers-pwm2.yaml
> @@ -43,6 +43,9 @@ properties:
> - const: bus
> - const: timer
>
> + resets:
> + maxItems: 2
> +
> snps,pwm-number:
> $ref: /schemas/types.yaml#/definitions/uint32
> description: The number of PWM channels configured for this instance
> --
> 2.34.1
>
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]
^ permalink raw reply
* Re: [PATCH v2 1/4] dt-bindings: soc: amlogic: clk-measure: Add A1 and T7 compatible
From: Conor Dooley @ 2026-04-15 15:10 UTC (permalink / raw)
To: jian.hu
Cc: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Neil Armstrong,
Kevin Hilman, Jerome Brunet, Martin Blumenstingl, devicetree,
linux-arm-kernel, linux-amlogic, linux-kernel
In-Reply-To: <20260415-clkmsr_a1_t7-v2-1-02b6314427e6@amlogic.com>
[-- Attachment #1: Type: text/plain, Size: 1212 bytes --]
On Wed, Apr 15, 2026 at 04:33:41PM +0800, Jian Hu via B4 Relay wrote:
> From: Jian Hu <jian.hu@amlogic.com>
>
> Add the Amlogic A1 and T7 compatible for the clk-measurer IP.
>
> Signed-off-by: Jian Hu <jian.hu@amlogic.com>
In the future, please note why fallback compatibles are not suitable in
patches like this.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
pw-bot: not-applicable
> ---
> .../devicetree/bindings/soc/amlogic/amlogic,meson-gx-clk-measure.yaml | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/soc/amlogic/amlogic,meson-gx-clk-measure.yaml b/Documentation/devicetree/bindings/soc/amlogic/amlogic,meson-gx-clk-measure.yaml
> index 39d4637c2d08..b1200e6940ac 100644
> --- a/Documentation/devicetree/bindings/soc/amlogic/amlogic,meson-gx-clk-measure.yaml
> +++ b/Documentation/devicetree/bindings/soc/amlogic/amlogic,meson-gx-clk-measure.yaml
> @@ -24,6 +24,8 @@ properties:
> - amlogic,meson-sm1-clk-measure
> - amlogic,c3-clk-measure
> - amlogic,s4-clk-measure
> + - amlogic,a1-clk-measure
> + - amlogic,t7-clk-measure
>
> reg:
> maxItems: 1
>
> --
> 2.47.1
>
>
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]
^ permalink raw reply
* Re: [PATCH v29 1/4] dt-bindings: i2c: Split AST2600 binding into a new YAML
From: Conor Dooley @ 2026-04-15 15:16 UTC (permalink / raw)
To: Ryan Chen
Cc: jk, andriy.shevchenko, Andi Shyti, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Joel Stanley, Andrew Jeffery,
Benjamin Herrenschmidt, Rayn Chen, Philipp Zabel, linux-i2c,
devicetree, linux-arm-kernel, linux-aspeed, linux-kernel, openbmc
In-Reply-To: <20260415-upstream_i2c-v29-1-317c1a905ae1@aspeedtech.com>
[-- Attachment #1: Type: text/plain, Size: 821 bytes --]
On Wed, Apr 15, 2026 at 01:14:02PM +0800, Ryan Chen wrote:
> The AST2600 I2C controller introduces a completely new register layout
> with separate controller and target register blocks, unlike the mixed
> register layout used by AST2400/AST2500.
>
> Move AST2600 I2C binding from aspeed,i2c.yaml to a dedicated
> aspeed,ast2600-i2c.yaml schema.
>
> Besides the split, this also adjusts for AST2600-specific requirements.
> - require two reg regions (controller register block + buffer block)
> - use clock-frequency for bus speed description
> - interrupts are required on AST2600
> - use correct DTS coding style in example
>
> No compatible strings are changed.
>
> Signed-off-by: Ryan Chen <ryan_chen@aspeedtech.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
pw-bot: not-applicable
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]
^ permalink raw reply
* Re: [PATCH v29 2/4] dt-bindings: i2c: ast2600-i2c.yaml: Add global-regs properties
From: Conor Dooley @ 2026-04-15 15:19 UTC (permalink / raw)
To: Ryan Chen
Cc: jk, andriy.shevchenko, Andi Shyti, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Joel Stanley, Andrew Jeffery,
Benjamin Herrenschmidt, Rayn Chen, Philipp Zabel, linux-i2c,
devicetree, linux-arm-kernel, linux-aspeed, linux-kernel, openbmc
In-Reply-To: <20260415-upstream_i2c-v29-2-317c1a905ae1@aspeedtech.com>
[-- Attachment #1: Type: text/plain, Size: 2088 bytes --]
On Wed, Apr 15, 2026 at 01:14:03PM +0800, Ryan Chen wrote:
> Add the aspeed,global-regs phandle to reference the AST2600 global
> registers syscon node, containing the SoC-common I2C register set.
>
> These properties apply only to the AST2600 binding. Legacy DTs remain
> unchanged.
>
> Signed-off-by: Ryan Chen <ryan_chen@aspeedtech.com>
I hate to do it to you on v29, but can you please explain what this
"soc-common i2c register set" actually is/does in your commit message.
The patch seems fine, so with that
Acked-by: Conor Dooley <conor.dooley@microchip.com>
pw-bot: not-applicable
> ---
> Changes in v29:
> - remove aspeed,enable-dma properties.
>
> Changes in v28:
> - update commit message correspond with aspeed,enable-dma.
> - remove aspeed,transfer-mode and add aspeed,enable-dma property and
> description.
> - Fix aspeed,enable-dma description to reflect hardware capability rather
> than software behavior
>
> Changes in v27:
> - change aspeed,transfer-mode to aspeed,enable-dma.
> ---
> Documentation/devicetree/bindings/i2c/aspeed,ast2600-i2c.yaml | 7 +++++++
> 1 file changed, 7 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/i2c/aspeed,ast2600-i2c.yaml b/Documentation/devicetree/bindings/i2c/aspeed,ast2600-i2c.yaml
> index de2c359037da..0c769efb76a5 100644
> --- a/Documentation/devicetree/bindings/i2c/aspeed,ast2600-i2c.yaml
> +++ b/Documentation/devicetree/bindings/i2c/aspeed,ast2600-i2c.yaml
> @@ -37,6 +37,12 @@ properties:
> resets:
> maxItems: 1
>
> + aspeed,global-regs:
> + $ref: /schemas/types.yaml#/definitions/phandle
> + description:
> + Phandle reference to the i2c global syscon node, containing the
> + SoC-common i2c register set.
> +
> required:
> - reg
> - compatible
> @@ -59,4 +65,5 @@ examples:
> resets = <&syscon ASPEED_RESET_I2C>;
> clock-frequency = <100000>;
> interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
> + aspeed,global-regs = <&i2c_global>;
> };
>
> --
> 2.34.1
>
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]
^ permalink raw reply
* [PATCH 0/9] ASoC: mediatek: mt2701: HDMI audio support
From: Daniel Golle @ 2026-04-15 15:23 UTC (permalink / raw)
To: Liam Girdwood, Mark Brown, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, Matthias Brugger, AngeloGioacchino Del Regno,
Jaroslav Kysela, Takashi Iwai, Cyril Chao, Arnd Bergmann,
Kuninori Morimoto, Daniel Golle, Nícolas F. R. A. Prado,
Eugen Hristev, linux-sound, devicetree, linux-kernel,
linux-arm-kernel, linux-mediatek
This series wires up on-chip HDMI audio on MT2701 and MT7623, from the
DRM bridge down through the AFE into a small machine driver that binds
the AFE HDMI BE to the HDMI TX codec already exposed by the
mediatek-drm-hdmi driver. Bindings, DT and a BananaPi R2 board node
are included.
In order to survive vblank or late hotplug of the monitor, the fix
submitted separately [1] is required as well.
Everything here was developed for and tested on a BananaPi R2
(MT7623N), which turns ten years old this year -- a nice occasion to
finally land native HDMI audio for a SoC which was truly ahead of its
time.
[1]: https://patchwork.kernel.org/project/linux-mediatek/patch/a3e22cbae528c9a38d854a586d1736b860998d41.1776265222.git.daniel@makrotopia.org/
Daniel Golle (9):
dt-bindings: sound: mt2701-afe-pcm: add HDMI audio path clocks
dt-bindings: sound: add mediatek,mt2701-hdmi-audio machine binding
ASoC: mediatek: mt2701: add AFE HDMI register definitions
ASoC: mediatek: mt2701: add optional HDMI audio path clocks
ASoC: mediatek: mt2701: add HDMI audio memif, FE and BE DAIs
ASoC: mediatek: mt2701: add machine driver for on-chip HDMI codec
ARM: dts: mediatek: mt2701: wire HDMI audio path clocks into AFE
ARM: dts: mediatek: mt7623: wire HDMI audio path clocks into AFE
ARM: dts: mediatek: mt7623n-bananapi-bpi-r2: add HDMI audio machine
node
.../bindings/sound/mediatek,mt2701-audio.yaml | 10 +
.../sound/mediatek,mt2701-hdmi-audio.yaml | 47 +++
arch/arm/boot/dts/mediatek/mt2701.dtsi | 21 +-
arch/arm/boot/dts/mediatek/mt7623.dtsi | 21 +-
.../dts/mediatek/mt7623n-bananapi-bpi-r2.dts | 7 +
sound/soc/mediatek/Kconfig | 10 +
sound/soc/mediatek/mt2701/Makefile | 1 +
.../mediatek/mt2701/mt2701-afe-clock-ctrl.c | 22 ++
sound/soc/mediatek/mt2701/mt2701-afe-common.h | 6 +
sound/soc/mediatek/mt2701/mt2701-afe-pcm.c | 281 +++++++++++++++++-
sound/soc/mediatek/mt2701/mt2701-hdmi.c | 114 +++++++
sound/soc/mediatek/mt2701/mt2701-reg.h | 35 +++
12 files changed, 564 insertions(+), 11 deletions(-)
create mode 100644 Documentation/devicetree/bindings/sound/mediatek,mt2701-hdmi-audio.yaml
create mode 100644 sound/soc/mediatek/mt2701/mt2701-hdmi.c
--
2.53.0
^ permalink raw reply
* [PATCH 1/9] dt-bindings: sound: mt2701-afe-pcm: add HDMI audio path clocks
From: Daniel Golle @ 2026-04-15 15:23 UTC (permalink / raw)
To: Liam Girdwood, Mark Brown, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, Matthias Brugger, AngeloGioacchino Del Regno,
Jaroslav Kysela, Takashi Iwai, Cyril Chao, Arnd Bergmann,
Kuninori Morimoto, Daniel Golle, Nícolas F. R. A. Prado,
Eugen Hristev, linux-sound, devicetree, linux-kernel,
linux-arm-kernel, linux-mediatek
In-Reply-To: <cover.1776265610.git.daniel@makrotopia.org>
Document four additional optional clocks feeding the HDMI audio
output path on MT2701 and MT7623N: the HADDS2 PLL (root of the
HDMI audio clock tree), the HDMI audio and S/PDIF interface power
gates, and the audio APLL root gate. Older device trees that do
not wire these up remain valid via minItems.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
---
.../bindings/sound/mediatek,mt2701-audio.yaml | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/Documentation/devicetree/bindings/sound/mediatek,mt2701-audio.yaml b/Documentation/devicetree/bindings/sound/mediatek,mt2701-audio.yaml
index 45382c4d86aa3..9d4fc542cd72c 100644
--- a/Documentation/devicetree/bindings/sound/mediatek,mt2701-audio.yaml
+++ b/Documentation/devicetree/bindings/sound/mediatek,mt2701-audio.yaml
@@ -32,6 +32,7 @@ properties:
maxItems: 1
clocks:
+ minItems: 34
items:
- description: audio infra sys clock
- description: top audio mux 1
@@ -67,8 +68,13 @@ properties:
- description: top audio a1 sys pd
- description: top audio a2 sys pd
- description: audio merge interface pd
+ - description: HADDS2 PLL 294 MHz (HDMI audio path root)
+ - description: HDMI audio interface pd
+ - description: S/PDIF interface pd
+ - description: audio APLL root pd
clock-names:
+ minItems: 34
items:
- const: infra_sys_audio_clk
- const: top_audio_mux1_sel
@@ -104,6 +110,10 @@ properties:
- const: audio_a1sys_pd
- const: audio_a2sys_pd
- const: audio_mrgif_pd
+ - const: hadds2pll_294m
+ - const: audio_hdmi_pd
+ - const: audio_spdf_pd
+ - const: audio_apll_pd
required:
- compatible
--
2.53.0
^ permalink raw reply related
* [PATCH 2/9] dt-bindings: sound: add mediatek,mt2701-hdmi-audio machine binding
From: Daniel Golle @ 2026-04-15 15:23 UTC (permalink / raw)
To: Liam Girdwood, Mark Brown, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, Matthias Brugger, AngeloGioacchino Del Regno,
Jaroslav Kysela, Takashi Iwai, Cyril Chao, Arnd Bergmann,
Kuninori Morimoto, Daniel Golle, Nícolas F. R. A. Prado,
Eugen Hristev, linux-sound, devicetree, linux-kernel,
linux-arm-kernel, linux-mediatek
In-Reply-To: <cover.1776265610.git.daniel@makrotopia.org>
Describe the ASoC machine compatible used to wire the MT2701/MT7623N
AFE HDMI playback path to the on-chip HDMI transmitter acting as the
generic HDMI audio codec. MT7623N boards carry the same IP and use
the mt7623n- compatible as a fallback to mt2701-.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
---
.../sound/mediatek,mt2701-hdmi-audio.yaml | 47 +++++++++++++++++++
1 file changed, 47 insertions(+)
create mode 100644 Documentation/devicetree/bindings/sound/mediatek,mt2701-hdmi-audio.yaml
diff --git a/Documentation/devicetree/bindings/sound/mediatek,mt2701-hdmi-audio.yaml b/Documentation/devicetree/bindings/sound/mediatek,mt2701-hdmi-audio.yaml
new file mode 100644
index 0000000000000..d08aee447b471
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/mediatek,mt2701-hdmi-audio.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/mediatek,mt2701-hdmi-audio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek MT2701 HDMI audio machine driver
+
+maintainers:
+ - Daniel Golle <daniel@makrotopia.org>
+
+description:
+ ASoC machine driver binding the MT2701 AFE HDMI playback path to
+ the on-chip HDMI transmitter via the generic HDMI audio codec.
+ The same HDMI audio IP is present on MT7623N.
+
+properties:
+ compatible:
+ oneOf:
+ - const: mediatek,mt2701-hdmi-audio
+ - items:
+ - const: mediatek,mt7623n-hdmi-audio
+ - const: mediatek,mt2701-hdmi-audio
+
+ mediatek,platform:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: Phandle of the MT2701/MT7623N AFE platform node.
+
+ mediatek,audio-codec:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: Phandle of the HDMI transmitter acting as audio codec.
+
+required:
+ - compatible
+ - mediatek,platform
+ - mediatek,audio-codec
+
+additionalProperties: false
+
+examples:
+ - |
+ sound-hdmi {
+ compatible = "mediatek,mt7623n-hdmi-audio",
+ "mediatek,mt2701-hdmi-audio";
+ mediatek,platform = <&afe>;
+ mediatek,audio-codec = <&hdmi0>;
+ };
--
2.53.0
^ permalink raw reply related
* [PATCH 3/9] ASoC: mediatek: mt2701: add AFE HDMI register definitions
From: Daniel Golle @ 2026-04-15 15:23 UTC (permalink / raw)
To: Liam Girdwood, Mark Brown, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, Matthias Brugger, AngeloGioacchino Del Regno,
Jaroslav Kysela, Takashi Iwai, Cyril Chao, Arnd Bergmann,
Kuninori Morimoto, Daniel Golle, Nícolas F. R. A. Prado,
Eugen Hristev, linux-sound, devicetree, linux-kernel,
linux-arm-kernel, linux-mediatek
In-Reply-To: <cover.1776265610.git.daniel@makrotopia.org>
Add register offsets and bit defines for the MT2701/MT7623N AFE
HDMI audio output path: the HDMI BCK divider in AUDIO_TOP_CON3,
the HDMI output memif control and descriptor registers, the 8-bit
AFE_HDMI_CONN0 interconnect, and the AFE_8CH_I2S_OUT_CON engine
that drives the HDMI TX serial link. These are a prerequisite for
adding an HDMI playback path to the mt2701 AFE driver and have no
behavioural effect on their own.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
---
sound/soc/mediatek/mt2701/mt2701-reg.h | 35 ++++++++++++++++++++++++++
1 file changed, 35 insertions(+)
diff --git a/sound/soc/mediatek/mt2701/mt2701-reg.h b/sound/soc/mediatek/mt2701/mt2701-reg.h
index c84d14cdd7ae8..b7a25bfb58662 100644
--- a/sound/soc/mediatek/mt2701/mt2701-reg.h
+++ b/sound/soc/mediatek/mt2701/mt2701-reg.h
@@ -10,10 +10,17 @@
#define _MT2701_REG_H_
#define AUDIO_TOP_CON0 0x0000
+#define AUDIO_TOP_CON3 0x000c
#define AUDIO_TOP_CON4 0x0010
#define AUDIO_TOP_CON5 0x0014
#define AFE_DAIBT_CON0 0x001c
#define AFE_MRGIF_CON 0x003c
+#define AFE_HDMI_OUT_CON0 0x0370
+#define AFE_HDMI_OUT_BASE 0x0374
+#define AFE_HDMI_OUT_CUR 0x0378
+#define AFE_HDMI_OUT_END 0x037c
+#define AFE_HDMI_CONN0 0x0390
+#define AFE_8CH_I2S_OUT_CON 0x0394
#define ASMI_TIMING_CON1 0x0100
#define ASMO_TIMING_CON1 0x0104
#define PWR1_ASM_CON1 0x0108
@@ -125,6 +132,34 @@
#define AFE_MEMIF_PBUF_SIZE_DLM_BYTE_MASK (0x3 << 12)
#define AFE_MEMIF_PBUF_SIZE_DLM_32BYTES (0x1 << 12)
+/* AUDIO_TOP_CON0 (0x0000) -- HDMI audio clock gating */
+#define AUDIO_TOP_CON0_PDN_HDMI_CK (0x1 << 20)
+#define AUDIO_TOP_CON0_PDN_SPDIF_CK (0x1 << 21)
+#define AUDIO_TOP_CON0_PDN_SPDIF2_CK (0x1 << 22)
+#define AUDIO_TOP_CON0_PDN_APLL_CK (0x1 << 23)
+
+/* AUDIO_TOP_CON3 (0x000c) -- HDMI BCK divider */
+#define AUDIO_TOP_CON3_HDMI_BCK_DIV_MASK (0x3f << 8)
+#define AUDIO_TOP_CON3_HDMI_BCK_DIV(x) (((x) & 0x3f) << 8)
+
+/* AFE_HDMI_OUT_CON0 (0x0370) */
+#define AFE_HDMI_OUT_CON0_OUT_ON (0x1 << 0)
+#define AFE_HDMI_OUT_CON0_BIT_WIDTH_MASK (0x1 << 1)
+#define AFE_HDMI_OUT_CON0_BIT_WIDTH_16 (0x0 << 1)
+#define AFE_HDMI_OUT_CON0_BIT_WIDTH_32 (0x1 << 1)
+#define AFE_HDMI_OUT_CON0_CH_NUM_MASK (0xf << 4)
+#define AFE_HDMI_OUT_CON0_CH_NUM(x) (((x) & 0xf) << 4)
+
+/* AFE_8CH_I2S_OUT_CON (0x0394) -- on-SoC 8-channel I2S that feeds HDMI TX */
+#define AFE_8CH_I2S_OUT_CON_EN (0x1 << 0)
+#define AFE_8CH_I2S_OUT_CON_BCK_INV (0x1 << 1)
+#define AFE_8CH_I2S_OUT_CON_LRCK_INV (0x1 << 2)
+#define AFE_8CH_I2S_OUT_CON_I2S_DELAY (0x1 << 3)
+#define AFE_8CH_I2S_OUT_CON_WLEN_MASK (0x3 << 4)
+#define AFE_8CH_I2S_OUT_CON_WLEN_16BIT (0x1 << 4)
+#define AFE_8CH_I2S_OUT_CON_WLEN_24BIT (0x2 << 4)
+#define AFE_8CH_I2S_OUT_CON_WLEN_32BIT (0x3 << 4)
+
/* I2S in/out register bit control */
#define ASYS_I2S_CON_FS (0x1f << 8)
#define ASYS_I2S_CON_FS_SET(x) ((x) << 8)
--
2.53.0
^ permalink raw reply related
* [PATCH 4/9] ASoC: mediatek: mt2701: add optional HDMI audio path clocks
From: Daniel Golle @ 2026-04-15 15:23 UTC (permalink / raw)
To: Liam Girdwood, Mark Brown, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, Matthias Brugger, AngeloGioacchino Del Regno,
Jaroslav Kysela, Takashi Iwai, Cyril Chao, Arnd Bergmann,
Kuninori Morimoto, Daniel Golle, Nícolas F. R. A. Prado,
Eugen Hristev, linux-sound, devicetree, linux-kernel,
linux-arm-kernel, linux-mediatek
In-Reply-To: <cover.1776265610.git.daniel@makrotopia.org>
The HDMI audio output path on MT2701/MT7623N is rooted in HADDS2PLL
and gated by the audio_hdmi, audio_spdf and audio_apll power gates.
Acquire these four clocks from device tree using devm_clk_get_optional
so that existing platforms which do not wire up HDMI audio keep
probing unchanged. Actual clock enable/prepare is deferred to the
upcoming HDMI DAI startup path.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
---
.../mediatek/mt2701/mt2701-afe-clock-ctrl.c | 22 +++++++++++++++++++
sound/soc/mediatek/mt2701/mt2701-afe-common.h | 4 ++++
2 files changed, 26 insertions(+)
diff --git a/sound/soc/mediatek/mt2701/mt2701-afe-clock-ctrl.c b/sound/soc/mediatek/mt2701/mt2701-afe-clock-ctrl.c
index ae620890bb3ac..5a2bcf027b4fb 100644
--- a/sound/soc/mediatek/mt2701/mt2701-afe-clock-ctrl.c
+++ b/sound/soc/mediatek/mt2701/mt2701-afe-clock-ctrl.c
@@ -95,6 +95,28 @@ int mt2701_init_clock(struct mtk_base_afe *afe)
afe_priv->mrgif_ck = NULL;
}
+ /*
+ * Optional HDMI audio clocks. Platforms that do not wire up the
+ * HDMI output (e.g. MT2701 devkits using only the I2S BE DAIs)
+ * may omit these; in that case the HDMI BE DAI simply cannot be
+ * enabled, but the rest of the AFE still probes.
+ */
+ afe_priv->hadds2pll_ck = devm_clk_get_optional(afe->dev, "hadds2pll_294m");
+ if (IS_ERR(afe_priv->hadds2pll_ck))
+ return PTR_ERR(afe_priv->hadds2pll_ck);
+
+ afe_priv->audio_hdmi_ck = devm_clk_get_optional(afe->dev, "audio_hdmi_pd");
+ if (IS_ERR(afe_priv->audio_hdmi_ck))
+ return PTR_ERR(afe_priv->audio_hdmi_ck);
+
+ afe_priv->audio_spdf_ck = devm_clk_get_optional(afe->dev, "audio_spdf_pd");
+ if (IS_ERR(afe_priv->audio_spdf_ck))
+ return PTR_ERR(afe_priv->audio_spdf_ck);
+
+ afe_priv->audio_apll_ck = devm_clk_get_optional(afe->dev, "audio_apll_pd");
+ if (IS_ERR(afe_priv->audio_apll_ck))
+ return PTR_ERR(afe_priv->audio_apll_ck);
+
return 0;
}
diff --git a/sound/soc/mediatek/mt2701/mt2701-afe-common.h b/sound/soc/mediatek/mt2701/mt2701-afe-common.h
index 32bef5e2a56d9..7b15283d6351e 100644
--- a/sound/soc/mediatek/mt2701/mt2701-afe-common.h
+++ b/sound/soc/mediatek/mt2701/mt2701-afe-common.h
@@ -90,6 +90,10 @@ struct mt2701_afe_private {
struct mt2701_i2s_path *i2s_path;
struct clk *base_ck[MT2701_BASE_CLK_NUM];
struct clk *mrgif_ck;
+ struct clk *hadds2pll_ck;
+ struct clk *audio_hdmi_ck;
+ struct clk *audio_spdf_ck;
+ struct clk *audio_apll_ck;
bool mrg_enable[MTK_STREAM_NUM];
const struct mt2701_soc_variants *soc;
--
2.53.0
^ permalink raw reply related
* [PATCH 5/9] ASoC: mediatek: mt2701: add HDMI audio memif, FE and BE DAIs
From: Daniel Golle @ 2026-04-15 15:23 UTC (permalink / raw)
To: Liam Girdwood, Mark Brown, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, Matthias Brugger, AngeloGioacchino Del Regno,
Jaroslav Kysela, Takashi Iwai, Cyril Chao, Arnd Bergmann,
Kuninori Morimoto, Daniel Golle, Nícolas F. R. A. Prado,
Eugen Hristev, linux-sound, devicetree, linux-kernel,
linux-arm-kernel, linux-mediatek
In-Reply-To: <cover.1776265610.git.daniel@makrotopia.org>
Extend the MT2701/MT7623N AFE driver with the HDMI playback path:
- a new HDMI DMA memif (MT2701_MEMIF_HDMI) mapped to the
AFE_HDMI_OUT_{CON0,BASE,CUR,END} registers;
- a PCM_HDMI front-end DAI (S16_LE only, 44.1k/48k) which feeds
the memif via DPCM;
- an HDMI BE DAI wrapping the AFE_8CH_I2S_OUT_CON engine that
serialises L/R samples towards the on-chip HDMI transmitter.
Sample-rate programming uses the empirically determined
HDMI_BCK_DIV = 45 * 48000 / rate - 1 formula in AUDIO_TOP_CON3,
which covers 44.1 kHz and 48 kHz within the 6-bit divider range.
The AFE_HDMI_CONN0 interconnect is programmed to route memif
output pairs to the serializer inputs with L/R in the right order
for hdmi-audio-codec.
The existing I2S engine helpers (mt2701_mclk_configuration,
mt2701_i2s_path_enable, mt2701_afe_i2s_path_disable) are reused
for the HDMI BE so that MCLK at 128*fs and the ASYS I2S3 FS field
are programmed and cleanly released across open/close cycles.
Only S16_LE and 44.1k/48k are exposed to userspace. Other rates
fall outside the 6-bit BCK divider range, and wider sample
formats require DMA BIT_WIDTH programming that the current memif
setup does not handle. These limits match what the MT8173 AFE
driver exposes for its HDMI path.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
---
sound/soc/mediatek/mt2701/mt2701-afe-common.h | 2 +
sound/soc/mediatek/mt2701/mt2701-afe-pcm.c | 281 +++++++++++++++++-
2 files changed, 282 insertions(+), 1 deletion(-)
diff --git a/sound/soc/mediatek/mt2701/mt2701-afe-common.h b/sound/soc/mediatek/mt2701/mt2701-afe-common.h
index 7b15283d6351e..8b6f3a200048a 100644
--- a/sound/soc/mediatek/mt2701/mt2701-afe-common.h
+++ b/sound/soc/mediatek/mt2701/mt2701-afe-common.h
@@ -33,6 +33,7 @@ enum {
MT2701_MEMIF_UL5,
MT2701_MEMIF_DLBT,
MT2701_MEMIF_ULBT,
+ MT2701_MEMIF_HDMI,
MT2701_MEMIF_NUM,
MT2701_IO_I2S = MT2701_MEMIF_NUM,
MT2701_IO_2ND_I2S,
@@ -41,6 +42,7 @@ enum {
MT2701_IO_5TH_I2S,
MT2701_IO_6TH_I2S,
MT2701_IO_MRG,
+ MT2701_IO_HDMI,
};
enum {
diff --git a/sound/soc/mediatek/mt2701/mt2701-afe-pcm.c b/sound/soc/mediatek/mt2701/mt2701-afe-pcm.c
index fcae38135d93f..61b4fb512be35 100644
--- a/sound/soc/mediatek/mt2701/mt2701-afe-pcm.c
+++ b/sound/soc/mediatek/mt2701/mt2701-afe-pcm.c
@@ -13,6 +13,7 @@
#include <linux/mfd/syscon.h>
#include <linux/of.h>
#include <linux/pm_runtime.h>
+#include <sound/pcm_params.h>
#include "mt2701-afe-common.h"
#include "mt2701-afe-clock-ctrl.h"
@@ -542,6 +543,221 @@ static const struct snd_soc_dai_ops mt2701_btmrg_ops = {
.hw_params = mt2701_btmrg_hw_params,
};
+/*
+ * HDMI BE DAI -- drives the on-SoC 8-channel I2S engine whose output
+ * feeds the HDMI transmitter audio port.
+ *
+ * The HDMI audio hardware path is:
+ * HDMI memif DMA (AFE_HDMI_OUT_*) -> interconnect mux (AFE_HDMI_CONN0)
+ * -> 8-channel I2S engine (AFE_8CH_I2S_OUT_CON) -> HDMI TX audio port
+ *
+ * The I2S3 clock tree provides the bit/master clocks; we set its
+ * mclk_rate to 128*fs (matching HDMI_AUD_MCLK_128FS) and let
+ * mt2701_mclk_configuration program the PLL/divider path.
+ */
+#define MT2701_HDMI_I2S_PATH 3
+
+static int mt2701_afe_hdmi_startup(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *dai)
+{
+ struct mtk_base_afe *afe = snd_soc_dai_get_drvdata(dai);
+ struct mt2701_afe_private *afe_priv = afe->platform_priv;
+ int ret;
+
+ if (!afe_priv->hadds2pll_ck || !afe_priv->audio_hdmi_ck) {
+ dev_err(afe->dev, "HDMI audio clocks not available\n");
+ return -ENODEV;
+ }
+
+ ret = clk_prepare_enable(afe_priv->hadds2pll_ck);
+ if (ret)
+ return ret;
+
+ ret = clk_prepare_enable(afe_priv->audio_hdmi_ck);
+ if (ret)
+ goto err_hdmi;
+
+ if (afe_priv->audio_spdf_ck) {
+ ret = clk_prepare_enable(afe_priv->audio_spdf_ck);
+ if (ret)
+ goto err_spdf;
+ }
+
+ if (afe_priv->audio_apll_ck) {
+ ret = clk_prepare_enable(afe_priv->audio_apll_ck);
+ if (ret)
+ goto err_apll;
+ }
+
+ ret = mt2701_afe_enable_mclk(afe, MT2701_HDMI_I2S_PATH);
+ if (ret)
+ goto err_mclk;
+
+ return 0;
+
+err_mclk:
+ if (afe_priv->audio_apll_ck)
+ clk_disable_unprepare(afe_priv->audio_apll_ck);
+err_apll:
+ if (afe_priv->audio_spdf_ck)
+ clk_disable_unprepare(afe_priv->audio_spdf_ck);
+err_spdf:
+ clk_disable_unprepare(afe_priv->audio_hdmi_ck);
+err_hdmi:
+ clk_disable_unprepare(afe_priv->hadds2pll_ck);
+ return ret;
+}
+
+static void mt2701_afe_hdmi_shutdown(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *dai)
+{
+ struct mtk_base_afe *afe = snd_soc_dai_get_drvdata(dai);
+ struct mt2701_afe_private *afe_priv = afe->platform_priv;
+
+ mt2701_afe_disable_mclk(afe, MT2701_HDMI_I2S_PATH);
+ if (afe_priv->audio_apll_ck)
+ clk_disable_unprepare(afe_priv->audio_apll_ck);
+ if (afe_priv->audio_spdf_ck)
+ clk_disable_unprepare(afe_priv->audio_spdf_ck);
+ clk_disable_unprepare(afe_priv->audio_hdmi_ck);
+ clk_disable_unprepare(afe_priv->hadds2pll_ck);
+}
+
+static int mt2701_afe_hdmi_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params,
+ struct snd_soc_dai *dai)
+{
+ struct mtk_base_afe *afe = snd_soc_dai_get_drvdata(dai);
+ struct mt2701_afe_private *afe_priv = afe->platform_priv;
+ unsigned int channels = params_channels(params);
+ unsigned int rate = params_rate(params);
+ unsigned int divp1;
+ unsigned int val;
+ unsigned int i;
+ int ret;
+
+ /*
+ * Compute AUDIO_TOP_CON3.HDMI_BCK_DIV up front. The divider
+ * drives an internal reference for the HDMI transmitter's
+ * audio packet engine; it must scale with the sample rate so
+ * that the packet engine's timing matches the data flowing in
+ * from the AFE memif/I2S3 side. Empirically, with audpll_sel
+ * parented to hadds2pll_98m (98.304 MHz), the correct value at
+ * 48 kHz is div = 44 (i.e. (div+1) = 45), giving 1.0923 MHz.
+ * Scaling inversely with rate: (div + 1) = 45 * 48000 / rate.
+ * Integer rounding introduces small (<1%) errors at 32 kHz;
+ * 44.1 kHz is nearly exact via round-to-nearest. Reject rates
+ * that fall outside the 6-bit divider range before touching
+ * any hardware so no side effects are left behind on error.
+ */
+ divp1 = (45U * 48000U + rate / 2) / rate;
+ if (divp1 == 0 || divp1 > 64)
+ return -EINVAL;
+
+ /*
+ * Park the I2S3 clock tree at 128*fs -- this is the MCLK that
+ * the ASYS I2S3 engine uses to derive its BCK/LRCK. The engine
+ * outputs BCK = 64*fs (stereo, 32-bit word length).
+ */
+ afe_priv->i2s_path[MT2701_HDMI_I2S_PATH].mclk_rate = rate * 128;
+ ret = mt2701_mclk_configuration(afe, MT2701_HDMI_I2S_PATH);
+ if (ret)
+ return ret;
+
+ /* Program and start the ASYS I2S3 engine (FS, I2S mode, enable). */
+ mt2701_i2s_path_enable(afe,
+ &afe_priv->i2s_path[MT2701_HDMI_I2S_PATH],
+ SNDRV_PCM_STREAM_PLAYBACK, rate);
+
+ regmap_update_bits(afe->regmap, AUDIO_TOP_CON3,
+ AUDIO_TOP_CON3_HDMI_BCK_DIV_MASK,
+ AUDIO_TOP_CON3_HDMI_BCK_DIV(divp1 - 1));
+
+ /* Channel count into the HDMI output memif (bits [7:4]). */
+ regmap_update_bits(afe->regmap, AFE_HDMI_OUT_CON0,
+ 0x000000f0, channels << 4);
+
+ /*
+ * Interconnect mux -- map DMA input slots to HDMI output slots.
+ * Each output takes a 3-bit field at shift (i*3). Swap the first
+ * two inputs so that the DMA's interleaved L/R pair lands on the
+ * correct HDMI L/R output slots. Remaining slots are identity.
+ */
+ val = (1 << 0) | (0 << 3); /* O20 <- I21, O21 <- I20 */
+ for (i = 2; i < 8; i++)
+ val |= ((i & 0x7) << (i * 3));
+ regmap_write(afe->regmap, AFE_HDMI_CONN0, val);
+
+ /*
+ * 8-channel I2S framing: standard I2S, 32-bit slots,
+ * LRCK/BCK inverted. The wire protocol is fixed.
+ */
+ regmap_update_bits(afe->regmap, AFE_8CH_I2S_OUT_CON,
+ AFE_8CH_I2S_OUT_CON_WLEN_MASK |
+ AFE_8CH_I2S_OUT_CON_I2S_DELAY |
+ AFE_8CH_I2S_OUT_CON_LRCK_INV |
+ AFE_8CH_I2S_OUT_CON_BCK_INV,
+ AFE_8CH_I2S_OUT_CON_WLEN_32BIT |
+ AFE_8CH_I2S_OUT_CON_I2S_DELAY |
+ AFE_8CH_I2S_OUT_CON_LRCK_INV |
+ AFE_8CH_I2S_OUT_CON_BCK_INV);
+ return 0;
+}
+
+static int mt2701_afe_hdmi_trigger(struct snd_pcm_substream *substream, int cmd,
+ struct snd_soc_dai *dai)
+{
+ struct mtk_base_afe *afe = snd_soc_dai_get_drvdata(dai);
+
+ switch (cmd) {
+ case SNDRV_PCM_TRIGGER_START:
+ case SNDRV_PCM_TRIGGER_RESUME:
+ /* Ungate HDMI and SPDIF power islands. */
+ regmap_update_bits(afe->regmap, AUDIO_TOP_CON0,
+ AUDIO_TOP_CON0_PDN_HDMI_CK |
+ AUDIO_TOP_CON0_PDN_SPDIF_CK, 0);
+ /* Enable HDMI output memif. */
+ regmap_update_bits(afe->regmap, AFE_HDMI_OUT_CON0, 0x1, 0x1);
+ /* Enable 8-channel I2S engine. */
+ regmap_update_bits(afe->regmap, AFE_8CH_I2S_OUT_CON,
+ AFE_8CH_I2S_OUT_CON_EN,
+ AFE_8CH_I2S_OUT_CON_EN);
+ return 0;
+ case SNDRV_PCM_TRIGGER_STOP:
+ case SNDRV_PCM_TRIGGER_SUSPEND:
+ regmap_update_bits(afe->regmap, AFE_8CH_I2S_OUT_CON,
+ AFE_8CH_I2S_OUT_CON_EN, 0);
+ regmap_update_bits(afe->regmap, AFE_HDMI_OUT_CON0, 0x1, 0);
+ regmap_update_bits(afe->regmap, AUDIO_TOP_CON0,
+ AUDIO_TOP_CON0_PDN_HDMI_CK |
+ AUDIO_TOP_CON0_PDN_SPDIF_CK,
+ AUDIO_TOP_CON0_PDN_HDMI_CK |
+ AUDIO_TOP_CON0_PDN_SPDIF_CK);
+ return 0;
+ }
+ return -EINVAL;
+}
+
+static int mt2701_afe_hdmi_hw_free(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *dai)
+{
+ struct mtk_base_afe *afe = snd_soc_dai_get_drvdata(dai);
+ struct mt2701_afe_private *afe_priv = afe->platform_priv;
+
+ mt2701_afe_i2s_path_disable(afe,
+ &afe_priv->i2s_path[MT2701_HDMI_I2S_PATH],
+ SNDRV_PCM_STREAM_PLAYBACK);
+ return 0;
+}
+
+static const struct snd_soc_dai_ops mt2701_afe_hdmi_ops = {
+ .startup = mt2701_afe_hdmi_startup,
+ .shutdown = mt2701_afe_hdmi_shutdown,
+ .hw_params = mt2701_afe_hdmi_hw_params,
+ .hw_free = mt2701_afe_hdmi_hw_free,
+ .trigger = mt2701_afe_hdmi_trigger,
+};
+
static struct snd_soc_dai_driver mt2701_afe_pcm_dais[] = {
/* FE DAIs: memory intefaces to CPU */
{
@@ -628,6 +844,19 @@ static struct snd_soc_dai_driver mt2701_afe_pcm_dais[] = {
},
.ops = &mt2701_single_memif_dai_ops,
},
+ {
+ .name = "PCM_HDMI",
+ .id = MT2701_MEMIF_HDMI,
+ .playback = {
+ .stream_name = "HDMI Multich",
+ .channels_min = 2,
+ .channels_max = 8,
+ .rates = (SNDRV_PCM_RATE_44100 |
+ SNDRV_PCM_RATE_48000),
+ .formats = SNDRV_PCM_FMTBIT_S16_LE,
+ },
+ .ops = &mt2701_single_memif_dai_ops,
+ },
/* BE DAIs */
{
.name = "I2S0",
@@ -748,7 +977,20 @@ static struct snd_soc_dai_driver mt2701_afe_pcm_dais[] = {
},
.ops = &mt2701_btmrg_ops,
.symmetric_rate = 1,
- }
+ },
+ {
+ .name = "HDMI I2S",
+ .id = MT2701_IO_HDMI,
+ .playback = {
+ .stream_name = "HDMI 8CH I2S Playback",
+ .channels_min = 2,
+ .channels_max = 8,
+ .rates = (SNDRV_PCM_RATE_44100 |
+ SNDRV_PCM_RATE_48000),
+ .formats = SNDRV_PCM_FMTBIT_S16_LE,
+ },
+ .ops = &mt2701_afe_hdmi_ops,
+ },
};
static const struct snd_kcontrol_new mt2701_afe_o00_mix[] = {
@@ -927,6 +1169,14 @@ static const struct snd_soc_dapm_route mt2701_afe_pcm_routes[] = {
{"I16I17", "Multich I2S2 Out Switch", "DLM"},
{"I18I19", "Multich I2S3 Out Switch", "DLM"},
+ /*
+ * HDMI FE -> BE direct route. The HDMI memif has its own DMA
+ * path that feeds the 8-channel internal I2S straight into the
+ * HDMI transmitter; no mixer/interconnect selection is exposed
+ * to the user.
+ */
+ {"HDMI 8CH I2S Playback", NULL, "HDMI Multich"},
+
{ "I12", NULL, "I12I13" },
{ "I13", NULL, "I12I13" },
{ "I14", NULL, "I14I15" },
@@ -1207,6 +1457,35 @@ static const struct mtk_base_memif_data memif_data_array[MT2701_MEMIF_NUM] = {
.agent_disable_shift = 16,
.msb_reg = -1,
},
+ {
+ /*
+ * HDMI memif feeds the on-SoC 8-channel internal I2S that
+ * drives the HDMI transmitter audio port. Unlike the
+ * standard memifs, the enable bit, channel count and bit
+ * width all live in AFE_HDMI_OUT_CON0, so mono/fs/hd/agent
+ * fields are left at -1 and programmed from the BE DAI ops
+ * instead.
+ */
+ .name = "HDMI",
+ .id = MT2701_MEMIF_HDMI,
+ .reg_ofs_base = AFE_HDMI_OUT_BASE,
+ .reg_ofs_cur = AFE_HDMI_OUT_CUR,
+ .reg_ofs_end = AFE_HDMI_OUT_END,
+ .fs_reg = -1,
+ .fs_shift = -1,
+ .fs_maskbit = 0,
+ .mono_reg = -1,
+ .mono_shift = -1,
+ .enable_reg = AFE_HDMI_OUT_CON0,
+ .enable_shift = 0,
+ .hd_reg = -1,
+ .hd_shift = -1,
+ .hd_align_reg = -1,
+ .hd_align_mshift = 0,
+ .agent_disable_reg = -1,
+ .agent_disable_shift = 0,
+ .msb_reg = -1,
+ },
};
static const struct mtk_base_irq_data irq_data[MT2701_IRQ_ASYS_END] = {
--
2.53.0
^ permalink raw reply related
* [PATCH 6/9] ASoC: mediatek: mt2701: add machine driver for on-chip HDMI codec
From: Daniel Golle @ 2026-04-15 15:24 UTC (permalink / raw)
To: Liam Girdwood, Mark Brown, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, Matthias Brugger, AngeloGioacchino Del Regno,
Jaroslav Kysela, Takashi Iwai, Cyril Chao, Arnd Bergmann,
Kuninori Morimoto, Daniel Golle, Nícolas F. R. A. Prado,
Eugen Hristev, linux-sound, devicetree, linux-kernel,
linux-arm-kernel, linux-mediatek
In-Reply-To: <cover.1776265610.git.daniel@makrotopia.org>
Add a simple ASoC machine driver that wires the MT2701/MT7623N
AFE HDMI playback path to the on-chip HDMI transmitter exposed
as a generic hdmi-audio-codec "i2s-hifi" DAI.
The driver binds to "mediatek,mt2701-hdmi-audio". MT7623N device
trees carry "mediatek,mt7623n-hdmi-audio" as a board-specific
fallback, matching the dt-binding.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
---
sound/soc/mediatek/Kconfig | 10 +++
sound/soc/mediatek/mt2701/Makefile | 1 +
sound/soc/mediatek/mt2701/mt2701-hdmi.c | 114 ++++++++++++++++++++++++
3 files changed, 125 insertions(+)
create mode 100644 sound/soc/mediatek/mt2701/mt2701-hdmi.c
diff --git a/sound/soc/mediatek/Kconfig b/sound/soc/mediatek/Kconfig
index 3a1e1fa3fe5cc..fa076e7854adc 100644
--- a/sound/soc/mediatek/Kconfig
+++ b/sound/soc/mediatek/Kconfig
@@ -26,6 +26,16 @@ config SND_SOC_MT2701_CS42448
Select Y if you have such device.
If unsure select "N".
+config SND_SOC_MT2701_HDMI
+ tristate "ASoC Audio driver for MT2701 with on-chip HDMI codec"
+ depends on SND_SOC_MT2701
+ select SND_SOC_HDMI_CODEC
+ help
+ This adds the ASoC machine driver for MediaTek MT2701 and
+ MT7623N boards routing the AFE I2S back-end to the on-chip
+ HDMI transmitter via the generic HDMI codec.
+ If unsure select "N".
+
config SND_SOC_MT2701_WM8960
tristate "ASoc Audio driver for MT2701 with WM8960 codec"
depends on SND_SOC_MT2701 && I2C
diff --git a/sound/soc/mediatek/mt2701/Makefile b/sound/soc/mediatek/mt2701/Makefile
index 507fa26c39452..59623d3d3a038 100644
--- a/sound/soc/mediatek/mt2701/Makefile
+++ b/sound/soc/mediatek/mt2701/Makefile
@@ -5,4 +5,5 @@ obj-$(CONFIG_SND_SOC_MT2701) += snd-soc-mt2701-afe.o
# machine driver
obj-$(CONFIG_SND_SOC_MT2701_CS42448) += mt2701-cs42448.o
+obj-$(CONFIG_SND_SOC_MT2701_HDMI) += mt2701-hdmi.o
obj-$(CONFIG_SND_SOC_MT2701_WM8960) += mt2701-wm8960.o
diff --git a/sound/soc/mediatek/mt2701/mt2701-hdmi.c b/sound/soc/mediatek/mt2701/mt2701-hdmi.c
new file mode 100644
index 0000000000000..a84907879c04e
--- /dev/null
+++ b/sound/soc/mediatek/mt2701/mt2701-hdmi.c
@@ -0,0 +1,114 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * mt2701-hdmi.c -- MT2701 HDMI ALSA SoC machine driver
+ *
+ * Copyright (c) 2026 Daniel Golle <daniel@makrotopia.org>
+ *
+ * Based on mt2701-cs42448.c
+ */
+
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <sound/soc.h>
+
+enum {
+ DAI_LINK_FE_HDMI_OUT,
+ DAI_LINK_BE_HDMI_I2S,
+};
+
+SND_SOC_DAILINK_DEFS(fe_hdmi_out,
+ DAILINK_COMP_ARRAY(COMP_CPU("PCM_HDMI")),
+ DAILINK_COMP_ARRAY(COMP_DUMMY()),
+ DAILINK_COMP_ARRAY(COMP_EMPTY()));
+
+SND_SOC_DAILINK_DEFS(be_hdmi_i2s,
+ DAILINK_COMP_ARRAY(COMP_CPU("HDMI I2S")),
+ DAILINK_COMP_ARRAY(COMP_CODEC(NULL, "i2s-hifi")),
+ DAILINK_COMP_ARRAY(COMP_EMPTY()));
+
+static struct snd_soc_dai_link mt2701_hdmi_dai_links[] = {
+ [DAI_LINK_FE_HDMI_OUT] = {
+ .name = "HDMI Playback",
+ .stream_name = "HDMI Playback",
+ .trigger = { SND_SOC_DPCM_TRIGGER_POST,
+ SND_SOC_DPCM_TRIGGER_POST },
+ .dynamic = 1,
+ .playback_only = 1,
+ SND_SOC_DAILINK_REG(fe_hdmi_out),
+ },
+ [DAI_LINK_BE_HDMI_I2S] = {
+ .name = "HDMI BE",
+ .no_pcm = 1,
+ .playback_only = 1,
+ .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF |
+ SND_SOC_DAIFMT_CBC_CFC,
+ SND_SOC_DAILINK_REG(be_hdmi_i2s),
+ },
+};
+
+static struct snd_soc_card mt2701_hdmi_soc_card = {
+ .name = "mt2701-hdmi",
+ .owner = THIS_MODULE,
+ .dai_link = mt2701_hdmi_dai_links,
+ .num_links = ARRAY_SIZE(mt2701_hdmi_dai_links),
+};
+
+static int mt2701_hdmi_machine_probe(struct platform_device *pdev)
+{
+ struct snd_soc_card *card = &mt2701_hdmi_soc_card;
+ struct device *dev = &pdev->dev;
+ struct device_node *platform_node;
+ struct device_node *codec_node;
+ struct snd_soc_dai_link *dai_link;
+ int ret;
+ int i;
+
+ platform_node = of_parse_phandle(dev->of_node, "mediatek,platform", 0);
+ if (!platform_node)
+ return dev_err_probe(dev, -EINVAL,
+ "Property 'mediatek,platform' missing\n");
+
+ for_each_card_prelinks(card, i, dai_link) {
+ if (dai_link->platforms->name)
+ continue;
+ dai_link->platforms->of_node = platform_node;
+ }
+
+ codec_node = of_parse_phandle(dev->of_node, "mediatek,audio-codec", 0);
+ if (!codec_node) {
+ of_node_put(platform_node);
+ return dev_err_probe(dev, -EINVAL,
+ "Property 'mediatek,audio-codec' missing\n");
+ }
+ mt2701_hdmi_dai_links[DAI_LINK_BE_HDMI_I2S].codecs->of_node = codec_node;
+
+ card->dev = dev;
+
+ ret = devm_snd_soc_register_card(dev, card);
+
+ of_node_put(platform_node);
+ of_node_put(codec_node);
+ return ret;
+}
+
+static const struct of_device_id mt2701_hdmi_machine_dt_match[] = {
+ { .compatible = "mediatek,mt2701-hdmi-audio" },
+ { .compatible = "mediatek,mt7623n-hdmi-audio" },
+ {}
+};
+MODULE_DEVICE_TABLE(of, mt2701_hdmi_machine_dt_match);
+
+static struct platform_driver mt2701_hdmi_machine = {
+ .driver = {
+ .name = "mt2701-hdmi",
+ .of_match_table = mt2701_hdmi_machine_dt_match,
+ },
+ .probe = mt2701_hdmi_machine_probe,
+};
+module_platform_driver(mt2701_hdmi_machine);
+
+MODULE_DESCRIPTION("MT2701 HDMI ALSA SoC machine driver");
+MODULE_AUTHOR("Daniel Golle <daniel@makrotopia.org>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:mt2701-hdmi");
--
2.53.0
^ permalink raw reply related
* [PATCH 7/9] ARM: dts: mediatek: mt2701: wire HDMI audio path clocks into AFE
From: Daniel Golle @ 2026-04-15 15:24 UTC (permalink / raw)
To: Liam Girdwood, Mark Brown, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, Matthias Brugger, AngeloGioacchino Del Regno,
Jaroslav Kysela, Takashi Iwai, Cyril Chao, Arnd Bergmann,
Kuninori Morimoto, Daniel Golle, Nícolas F. R. A. Prado,
Eugen Hristev, linux-sound, devicetree, linux-kernel,
linux-arm-kernel, linux-mediatek
In-Reply-To: <cover.1776265610.git.daniel@makrotopia.org>
Add the HADDS2 PLL 294 MHz root, the audio_hdmi and audio_spdf
interface gates and the audio_apll gate to the MT2701 AFE node,
and reparent the AUDPLL mux to HADDS2PLL_98M so the HDMI audio
serial clock path has a stable 294.912 MHz source. The clock
names match the updated mediatek,mt2701-audio binding.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
---
arch/arm/boot/dts/mediatek/mt2701.dtsi | 21 ++++++++++++++++-----
1 file changed, 16 insertions(+), 5 deletions(-)
diff --git a/arch/arm/boot/dts/mediatek/mt2701.dtsi b/arch/arm/boot/dts/mediatek/mt2701.dtsi
index 128b87229f3d5..80c8c7e6a422a 100644
--- a/arch/arm/boot/dts/mediatek/mt2701.dtsi
+++ b/arch/arm/boot/dts/mediatek/mt2701.dtsi
@@ -464,7 +464,11 @@ afe: audio-controller {
<&audsys CLK_AUD_AFE_CONN>,
<&audsys CLK_AUD_A1SYS>,
<&audsys CLK_AUD_A2SYS>,
- <&audsys CLK_AUD_AFE_MRGIF>;
+ <&audsys CLK_AUD_AFE_MRGIF>,
+ <&topckgen CLK_TOP_HADDS2PLL_294M>,
+ <&audsys CLK_AUD_HDMI>,
+ <&audsys CLK_AUD_SPDF>,
+ <&audsys CLK_AUD_APLL>;
clock-names = "infra_sys_audio_clk",
"top_audio_mux1_sel",
@@ -499,15 +503,22 @@ afe: audio-controller {
"audio_afe_conn_pd",
"audio_a1sys_pd",
"audio_a2sys_pd",
- "audio_mrgif_pd";
+ "audio_mrgif_pd",
+ "hadds2pll_294m",
+ "audio_hdmi_pd",
+ "audio_spdf_pd",
+ "audio_apll_pd";
assigned-clocks = <&topckgen CLK_TOP_AUD_MUX1_SEL>,
<&topckgen CLK_TOP_AUD_MUX2_SEL>,
<&topckgen CLK_TOP_AUD_MUX1_DIV>,
- <&topckgen CLK_TOP_AUD_MUX2_DIV>;
+ <&topckgen CLK_TOP_AUD_MUX2_DIV>,
+ <&topckgen CLK_TOP_AUDPLL_MUX_SEL>;
assigned-clock-parents = <&topckgen CLK_TOP_AUD1PLL_98M>,
- <&topckgen CLK_TOP_AUD2PLL_90M>;
- assigned-clock-rates = <0>, <0>, <49152000>, <45158400>;
+ <&topckgen CLK_TOP_AUD2PLL_90M>,
+ <0>, <0>,
+ <&topckgen CLK_TOP_HADDS2PLL_98M>;
+ assigned-clock-rates = <0>, <0>, <49152000>, <45158400>, <0>;
};
};
--
2.53.0
^ permalink raw reply related
* [PATCH 8/9] ARM: dts: mediatek: mt7623: wire HDMI audio path clocks into AFE
From: Daniel Golle @ 2026-04-15 15:24 UTC (permalink / raw)
To: Liam Girdwood, Mark Brown, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, Matthias Brugger, AngeloGioacchino Del Regno,
Jaroslav Kysela, Takashi Iwai, Cyril Chao, Arnd Bergmann,
Kuninori Morimoto, Daniel Golle, Nícolas F. R. A. Prado,
Eugen Hristev, linux-sound, devicetree, linux-kernel,
linux-arm-kernel, linux-mediatek
In-Reply-To: <cover.1776265610.git.daniel@makrotopia.org>
Mirror the MT2701 change for the MT7623 SoC dtsi: add HADDS2PLL,
audio_hdmi, audio_spdf and audio_apll to the AFE clocks list and
reparent the AUDPLL mux to HADDS2PLL_98M. Required for HDMI audio
on MT7623N boards via the shared mt2701 AFE driver.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
---
arch/arm/boot/dts/mediatek/mt7623.dtsi | 21 ++++++++++++++++-----
1 file changed, 16 insertions(+), 5 deletions(-)
diff --git a/arch/arm/boot/dts/mediatek/mt7623.dtsi b/arch/arm/boot/dts/mediatek/mt7623.dtsi
index 71ac2b94c6ba3..4eb028ffee6f5 100644
--- a/arch/arm/boot/dts/mediatek/mt7623.dtsi
+++ b/arch/arm/boot/dts/mediatek/mt7623.dtsi
@@ -665,7 +665,11 @@ afe: audio-controller {
<&audsys CLK_AUD_AFE_CONN>,
<&audsys CLK_AUD_A1SYS>,
<&audsys CLK_AUD_A2SYS>,
- <&audsys CLK_AUD_AFE_MRGIF>;
+ <&audsys CLK_AUD_AFE_MRGIF>,
+ <&topckgen CLK_TOP_HADDS2PLL_294M>,
+ <&audsys CLK_AUD_HDMI>,
+ <&audsys CLK_AUD_SPDF>,
+ <&audsys CLK_AUD_APLL>;
clock-names = "infra_sys_audio_clk",
"top_audio_mux1_sel",
@@ -700,15 +704,22 @@ afe: audio-controller {
"audio_afe_conn_pd",
"audio_a1sys_pd",
"audio_a2sys_pd",
- "audio_mrgif_pd";
+ "audio_mrgif_pd",
+ "hadds2pll_294m",
+ "audio_hdmi_pd",
+ "audio_spdf_pd",
+ "audio_apll_pd";
assigned-clocks = <&topckgen CLK_TOP_AUD_MUX1_SEL>,
<&topckgen CLK_TOP_AUD_MUX2_SEL>,
<&topckgen CLK_TOP_AUD_MUX1_DIV>,
- <&topckgen CLK_TOP_AUD_MUX2_DIV>;
+ <&topckgen CLK_TOP_AUD_MUX2_DIV>,
+ <&topckgen CLK_TOP_AUDPLL_MUX_SEL>;
assigned-clock-parents = <&topckgen CLK_TOP_AUD1PLL_98M>,
- <&topckgen CLK_TOP_AUD2PLL_90M>;
- assigned-clock-rates = <0>, <0>, <49152000>, <45158400>;
+ <&topckgen CLK_TOP_AUD2PLL_90M>,
+ <0>, <0>,
+ <&topckgen CLK_TOP_HADDS2PLL_98M>;
+ assigned-clock-rates = <0>, <0>, <49152000>, <45158400>, <0>;
};
};
--
2.53.0
^ permalink raw reply related
* [PATCH 9/9] ARM: dts: mediatek: mt7623n-bananapi-bpi-r2: add HDMI audio machine node
From: Daniel Golle @ 2026-04-15 15:24 UTC (permalink / raw)
To: Liam Girdwood, Mark Brown, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, Matthias Brugger, AngeloGioacchino Del Regno,
Jaroslav Kysela, Takashi Iwai, Cyril Chao, Arnd Bergmann,
Kuninori Morimoto, Daniel Golle, Nícolas F. R. A. Prado,
Eugen Hristev, linux-sound, devicetree, linux-kernel,
linux-arm-kernel, linux-mediatek
In-Reply-To: <cover.1776265610.git.daniel@makrotopia.org>
Instantiate the mediatek,mt2701-hdmi-audio machine on the
BananaPi BPI-R2, binding the AFE HDMI playback path to the
on-chip HDMI transmitter acting as the generic HDMI codec.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
---
arch/arm/boot/dts/mediatek/mt7623n-bananapi-bpi-r2.dts | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/arch/arm/boot/dts/mediatek/mt7623n-bananapi-bpi-r2.dts b/arch/arm/boot/dts/mediatek/mt7623n-bananapi-bpi-r2.dts
index a37f3fa223c72..139a76764faa0 100644
--- a/arch/arm/boot/dts/mediatek/mt7623n-bananapi-bpi-r2.dts
+++ b/arch/arm/boot/dts/mediatek/mt7623n-bananapi-bpi-r2.dts
@@ -132,6 +132,13 @@ memory@80000000 {
device_type = "memory";
reg = <0 0x80000000 0 0x80000000>;
};
+
+ sound-hdmi {
+ compatible = "mediatek,mt7623n-hdmi-audio",
+ "mediatek,mt2701-hdmi-audio";
+ mediatek,platform = <&afe>;
+ mediatek,audio-codec = <&hdmi0>;
+ };
};
&bls {
--
2.53.0
^ permalink raw reply related
* [PATCH] dt-bindings: iio: gyroscope: add mount-matrix for bmg160
From: Vishwas Rajashekar via B4 Relay @ 2026-04-15 15:43 UTC (permalink / raw)
To: Jonathan Cameron, David Lechner, Nuno Sá, Andy Shevchenko,
Rob Herring, Krzysztof Kozlowski, Conor Dooley,
H. Nikolaus Schaller
Cc: linux-iio, devicetree, linux-kernel, luca, Vishwas Rajashekar
From: Vishwas Rajashekar <vishwas.dev@vrajashkr.com>
Adds mount-matrix as an optional property to dt-bindings
for the bmg160 gyroscope as the driver reads this optional
property during probe.
Signed-off-by: Vishwas Rajashekar <vishwas.dev@vrajashkr.com>
---
The bmg160 driver reads an optional mount-matrix using
"iio_read_mount_matrix" in "bmg160_core_probe" and stores
this orientation data in "struct bmg160_data". As the "mount-matrix"
property is used by the driver, this change proposes to add it to
the corresponding dt-bindings.
---
Documentation/devicetree/bindings/iio/gyroscope/bosch,bmg160.yaml | 3 +++
1 file changed, 3 insertions(+)
diff --git a/Documentation/devicetree/bindings/iio/gyroscope/bosch,bmg160.yaml b/Documentation/devicetree/bindings/iio/gyroscope/bosch,bmg160.yaml
index 3c6fe74af0b8..ea8689660adf 100644
--- a/Documentation/devicetree/bindings/iio/gyroscope/bosch,bmg160.yaml
+++ b/Documentation/devicetree/bindings/iio/gyroscope/bosch,bmg160.yaml
@@ -22,6 +22,9 @@ properties:
vdd-supply: true
vddio-supply: true
+ mount-matrix:
+ description: an optional 3x3 mounting rotation matrix.
+
spi-max-frequency:
maximum: 10000000
---
base-commit: 591cd656a1bf5ea94a222af5ef2ee76df029c1d2
change-id: 20260414-bmg160-mount-matrix-dt-binding-e76ddde94866
Best regards,
--
Vishwas Rajashekar <vishwas.dev@vrajashkr.com>
^ permalink raw reply related
* Re: [PATCH RFC v2 00/11] Add support for AUDIN driver in Amlogic GXBB
From: Krzysztof Kozlowski @ 2026-04-15 15:53 UTC (permalink / raw)
To: Jerome Brunet, Valerio Setti
Cc: Liam Girdwood, Mark Brown, Jaroslav Kysela, Takashi Iwai,
Neil Armstrong, Kevin Hilman, Martin Blumenstingl, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, linux-kernel, linux-sound,
linux-arm-kernel, linux-amlogic, devicetree
In-Reply-To: <1jh5pcs2gw.fsf@starbuckisacylon.baylibre.com>
On 15/04/2026 16:49, Jerome Brunet wrote:
> On sam. 11 avril 2026 at 16:57, Valerio Setti <vsetti@baylibre.com> wrote:
>
>> This series adds support for I2S audio input (AUDIN) on the Amlogic GXBB
>> platform.
>>
>> It has been largely reshaped compared to what proposed in v1. Instead of
>> adding an HACK commit to allow AIU to export its clock so that also
>> AUDIN can control it, now the design closely follows what was implemented
>> in the Meson AXG platform. "aiu-encoder-i2s" becomes the shared interface
>> for playback/capture and it controls pins and clocks; data formatting
>> is implemented in formatters which are named "aiu-formatter-i2s" and
>> "audin-decoder-i2s" [1].
>> Formatters are DAPM widgets which are dynamically attached/detached to
>> the streams when the latters starts/stop, respectively.
>>
>> As of now only I2S input is supported, because it's the only one
>> I could physically test in my setup, but other input sources (ex: SPDIF)
>> are also allowed according to the SOC's manual and can be added in the
>> future.
>> This series was tested on an OdroidC2 board (Amlogic S905 SOC) with an
>> NXP SGTL5000 codec connected to its I2S input port.
>>
>> Since this work brings GX platform very close to the AXG one, once this
>> series is accepted, follow up work will be done in order to unify
>> GX and AXG formatters so as to minimize the number of implementations.
>>
>> The series a bit long and it includes changes to drivers, dt-bindings and
>> device-tree. Of course this only happens because this is an RFC and I
>> wanted to give a full overview of what will be the final design. If no
>> objection is raised, this patch series will be split into 3: one for
>> reshaping AIU and introducing formatters, one to add AUDIN driver and its
>> dt-bindings, one for the device-tree changes.
>>
>> [1]: Different naming for the aiu part is related to the fact that
>> "aiu-encoder-i2s" is already used for the interface and the goal
>> of this series was to introduce the minimum amount of changes that allow
>> I2S capture to work. Renaming can be implemented in the future as follow up
>> activity.
>
> Thanks a lot for this awesome work Valerio. I know this was a lot of
> effort. With Mark and Krzysztof comments addressed
>
My comments are still unanswered. One of the devices looks like
artificially split from some other, because one word register is not a
device.
Best regards,
Krzysztof
^ permalink raw reply
* Re: [PATCH 2/3] arm64: dts: amlogic: t7: Add UART controllers nodes
From: Ronald Claveau @ 2026-04-15 14:32 UTC (permalink / raw)
To: Xianwei Zhao
Cc: linux-arm-kernel, linux-amlogic, devicetree, linux-kernel,
Neil Armstrong, Kevin Hilman, Jerome Brunet, Martin Blumenstingl,
Rob Herring, Krzysztof Kozlowski, Conor Dooley
In-Reply-To: <68577e42-2fdb-4b66-84a4-610acb8b975b@amlogic.com>
Hi Xianwei,
On 4/15/26 1:38 PM, Xianwei Zhao wrote:
> Hi Ronald,
>
> On 2026/4/15 19:16, Ronald Claveau wrote:
>> Add device tree nodes for UART B through F (serial@7a000 to
>> serial@82000), completing the UART controller description for the T7
>> SoC. Each node includes the peripheral clock.
>>
>> While at it, move the uart_a node to its correct position in the
>> bus address order (0x78000) to comply with the DT requirement that
>> nodes be sorted by their reg address. Complete the
>> uart_a node with its peripheral clock (CLKID_SYS_UART_A) and the
>> associated clock-names, matching the vendor default clock assignment,
>> consistent with the other UART nodes.
>>
>> Signed-off-by: Ronald Claveau<linux-kernel-dev@aliel.fr>
>> ---
>> arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi | 61 +++++++++++++++++++
>> ++++++----
>> 1 file changed, 54 insertions(+), 7 deletions(-)
>>
>> diff --git a/arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi b/arch/arm64/
>> boot/dts/amlogic/amlogic-t7.dtsi
>> index 531931cc1437c..56b015cfbd6d1 100644
>> --- a/arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi
>> +++ b/arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi
>> @@ -577,13 +577,6 @@ gpio_intc: interrupt-controller@4080 {
>> <10 11 12 13 14 15 16 17 18
>> 19 20 21>;
>> };
>>
>> - uart_a: serial@78000 {
>> - compatible = "amlogic,t7-uart",
>> "amlogic,meson-s4-uart";
>> - reg = <0x0 0x78000 0x0 0x18>;
>> - interrupts = <GIC_SPI 168
>> IRQ_TYPE_EDGE_RISING>;
>> - status = "disabled";
>> - };
>> -
>> gp0: clock-controller@8080 {
>> compatible = "amlogic,t7-gp0-pll";
>> reg = <0x0 0x8080 0x0 0x20>;
>> @@ -713,6 +706,60 @@ pwm_ao_cd: pwm@60000 {
>> status = "disabled";
>> };
>>
>> + uart_a: serial@78000 {
>> + compatible = "amlogic,t7-uart",
>> "amlogic,meson-s4-uart";
>> + reg = <0x0 0x78000 0x0 0x18>;
>> + interrupts = <GIC_SPI 168
>> IRQ_TYPE_EDGE_RISING>;
>> + clocks = <&xtal>, <&clkc_periphs
>> CLKID_SYS_UART_A>, <&xtal>;
>> + clock-names = "xtal", "pclk", "baud";
>
> The xtal clock is defined in the board-level DTS file, while it is
> referenced in the DTSI file, which seems a bit unusual.
>
> On other chips, the xtal clock is usually defined directly in the DTSI
> file.
>
Thanks for your feedback.
I have tested with clock removed in the DTS, and it is ok.
I will send the modification in V2.
>> + status = "disabled";
>> + };
>> +
>> + uart_b: serial@7a000 {
>> + compatible = "amlogic,t7-uart",
>> "amlogic,meson-s4-uart";
>> + reg = <0x0 0x7a000 0x0 0x18>;
>> + interrupts = <GIC_SPI 169
>> IRQ_TYPE_EDGE_RISING>;
>> + clocks = <&xtal>, <&clkc_periphs
>> CLKID_SYS_UART_B>, <&xtal>;
>> + clock-names = "xtal", "pclk", "baud";
>> + status = "disabled";
>> + };
>> +
>> + uart_c: serial@7c000 {
>> + compatible = "amlogic,t7-uart",
>> "amlogic,meson-s4-uart";
>> + reg = <0x0 0x7c000 0x0 0x18>;
>> + interrupts = <GIC_SPI 170
>> IRQ_TYPE_EDGE_RISING>;
>> + clocks = <&xtal>, <&clkc_periphs
>> CLKID_SYS_UART_C>, <&xtal>;
>> + clock-names = "xtal", "pclk", "baud";
>> + status = "disabled";
>> + };
>> +
>> + uart_d: serial@7e000 {
>> + compatible = "amlogic,t7-uart",
>> "amlogic,meson-s4-uart";
>> + reg = <0x0 0x7e000 0x0 0x18>;
>> + interrupts = <GIC_SPI 171
>> IRQ_TYPE_EDGE_RISING>;
>> + clocks = <&xtal>, <&clkc_periphs
>> CLKID_SYS_UART_D>, <&xtal>;
>> + clock-names = "xtal", "pclk", "baud";
>> + status = "disabled";
>> + };
>> +
>> + uart_e: serial@80000 {
>> + compatible = "amlogic,t7-uart",
>> "amlogic,meson-s4-uart";
>> + reg = <0x0 0x80000 0x0 0x18>;
>> + interrupts = <GIC_SPI 172
>> IRQ_TYPE_EDGE_RISING>;
>> + clocks = <&xtal>, <&clkc_periphs
>> CLKID_SYS_UART_E>, <&xtal>;
>> + clock-names = "xtal", "pclk", "baud";
>> + status = "disabled";
>> + };
>> +
>> + uart_f: serial@82000 {
>> + compatible = "amlogic,t7-uart",
>> "amlogic,meson-s4-uart";
>> + reg = <0x0 0x82000 0x0 0x18>;
>> + interrupts = <GIC_SPI 173
>> IRQ_TYPE_EDGE_RISING>;
>> + clocks = <&xtal>, <&clkc_periphs
>> CLKID_SYS_UART_F>, <&xtal>;
>> + clock-names = "xtal", "pclk", "baud";
>> + status = "disabled";
>> + };
>> +
>> sd_emmc_a: mmc@88000 {
>> compatible = "amlogic,t7-mmc",
>> "amlogic,meson-axg-mmc";
>> reg = <0x0 0x88000 0x0 0x800>;
--
Best regards,
Ronald
^ permalink raw reply
* Re: [PATCH RFC v2 02/11] ASoC: meson: aiu-encoder-i2s: use gx_iface and gx_stream structures
From: Mark Brown @ 2026-04-15 16:26 UTC (permalink / raw)
To: Jerome Brunet
Cc: Valerio Setti, Liam Girdwood, Jaroslav Kysela, Takashi Iwai,
Neil Armstrong, Kevin Hilman, Martin Blumenstingl, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, linux-kernel, linux-sound,
linux-arm-kernel, linux-amlogic, devicetree
In-Reply-To: <1jy0ios3f9.fsf@starbuckisacylon.baylibre.com>
[-- Attachment #1: Type: text/plain, Size: 298 bytes --]
On Wed, Apr 15, 2026 at 04:28:58PM +0200, Jerome Brunet wrote:
> Valerio maybe you could keep function above just to set the rate, but
> enabling the clocks through a DAPM supply widget ? This is kind of what
> the AXG is doing.
> what do you think ?
FWIW this seems like a sensible plan to me.
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]
^ permalink raw reply
* Re: [PATCH 03/10] mfd: qcom_rpm: add msm8960 QDSS clock resource
From: Antony Kurniawan Soemardi @ 2026-04-15 15:20 UTC (permalink / raw)
To: Konrad Dybcio, Bjorn Andersson, Michael Turquette, Stephen Boyd,
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Lee Jones,
Konrad Dybcio
Cc: Krzysztof Kozlowski, linux-arm-msm, linux-clk, devicetree,
linux-kernel, phone-devel, Rudraksha Gupta
In-Reply-To: <caa589af-f026-4664-8fb9-6b23b0e087f9@oss.qualcomm.com>
On 4/14/2026 3:07 PM, Konrad Dybcio wrote:
> On 4/14/26 10:06 AM, Konrad Dybcio wrote:
>> On 4/13/26 8:55 PM, Antony Kurniawan Soemardi via B4 Relay wrote:
>>> From: Antony Kurniawan Soemardi <linux@smankusors.com>
>>>
>>> msm8960 uses the same clock descriptor as apq8064 but lacked the
>>
>> This doesn't quite seem to be the case, some fields differ and
>> apq8064 additionally has:
>>
>> QCOM_RPM_PM8821_SMPS1
>> QCOM_RPM_PM8821_SMPS2
>> QCOM_RPM_PM8821_LDO1
>> QCOM_RPM_VDDMIN_GPIO
>
> Ah hmm, the MFD driver seems to provide *all* RPM resources..
What I meant by "clock descriptor" in the commit message was
specifically the subset corresponding to RPM managed clocks. From what I
can tell based on downstream code, msm8960 and apq8064 seem to share the
same set of RPM clocks, even though the overall resource lists differ.
Is that understanding correct?
--
Thanks,
Antony K. S.
^ permalink raw reply
* Re: [PATCH] arm64: dts: st: Fix SAI addresses on stm32mp251
From: Olivier MOYSAN @ 2026-04-15 17:00 UTC (permalink / raw)
To: Marek Vasut, linux-arm-kernel
Cc: Alexandre Torgue, Conor Dooley, Krzysztof Kozlowski,
Maxime Coquelin, Rob Herring, devicetree, linux-kernel,
linux-stm32
In-Reply-To: <20260411130300.19603-1-marex@nabladev.com>
Hi Marek,
On 4/11/26 15:02, Marek Vasut wrote:
> The second field of SAI register addresses should be within 0x3f0 bytes
> from the start of the SAI register addresses, the second field describes
> the ID registers which are at that addrses. Currently, the second field
> does not match RM, fix it.
>
> Fixes: bf26d75a95f1 ("arm64: dts: st: add sai support on stm32mp251")
> Signed-off-by: Marek Vasut <marex@nabladev.com>
> ---
> Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
> Cc: Conor Dooley <conor+dt@kernel.org>
> Cc: Krzysztof Kozlowski <krzk+dt@kernel.org>
> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
> Cc: Olivier Moysan <olivier.moysan@foss.st.com>
> Cc: Rob Herring <robh@kernel.org>
> Cc: devicetree@vger.kernel.org
> Cc: linux-arm-kernel@lists.infradead.org
> Cc: linux-kernel@vger.kernel.org
> Cc: linux-stm32@st-md-mailman.stormreply.com
> ---
> arch/arm64/boot/dts/st/stm32mp251.dtsi | 8 ++++----
> 1 file changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/st/stm32mp251.dtsi b/arch/arm64/boot/dts/st/stm32mp251.dtsi
> index 673fbc5632e69..9c63fdb5a885a 100644
> --- a/arch/arm64/boot/dts/st/stm32mp251.dtsi
> +++ b/arch/arm64/boot/dts/st/stm32mp251.dtsi
> @@ -1202,7 +1202,7 @@ spi5: spi@40280000 {
>
> sai1: sai@40290000 {
> compatible = "st,stm32mp25-sai";
> - reg = <0x40290000 0x4>, <0x4029a3f0 0x10>;
> + reg = <0x40290000 0x4>, <0x402903f0 0x10>;
> ranges = <0 0x40290000 0x400>;
> #address-cells = <1>;
> #size-cells = <1>;
> @@ -1236,7 +1236,7 @@ sai1b: audio-controller@40290024 {
>
> sai2: sai@402a0000 {
> compatible = "st,stm32mp25-sai";
> - reg = <0x402a0000 0x4>, <0x402aa3f0 0x10>;
> + reg = <0x402a0000 0x4>, <0x402a03f0 0x10>;
> ranges = <0 0x402a0000 0x400>;
> #address-cells = <1>;
> #size-cells = <1>;
> @@ -1270,7 +1270,7 @@ sai2b: audio-controller@402a0024 {
>
> sai3: sai@402b0000 {
> compatible = "st,stm32mp25-sai";
> - reg = <0x402b0000 0x4>, <0x402ba3f0 0x10>;
> + reg = <0x402b0000 0x4>, <0x402b03f0 0x10>;
> ranges = <0 0x402b0000 0x400>;
> #address-cells = <1>;
> #size-cells = <1>;
> @@ -1362,7 +1362,7 @@ usart1: serial@40330000 {
>
> sai4: sai@40340000 {
> compatible = "st,stm32mp25-sai";
> - reg = <0x40340000 0x4>, <0x4034a3f0 0x10>;
> + reg = <0x40340000 0x4>, <0x403403f0 0x10>;
> ranges = <0 0x40340000 0x400>;
> #address-cells = <1>;
> #size-cells = <1>;
Reviewed-by: Olivier Moysan <olivier.moysan@foss.st.com>
Thanks for your patch
BRs
Olivier
^ permalink raw reply
* Re: [PATCH v4 02/13] dt-bindings: leds: document Samsung S2M series PMIC RGB LED device
From: Kaustabh Chakraborty @ 2026-04-15 17:30 UTC (permalink / raw)
To: Krzysztof Kozlowski, Kaustabh Chakraborty
Cc: Lee Jones, Pavel Machek, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, MyungJoo Ham, Chanwoo Choi, Sebastian Reichel,
André Draszik, Alexandre Belloni, Jonathan Corbet,
Shuah Khan, Nam Tran, Łukasz Lebiedziński, linux-leds,
devicetree, linux-kernel, linux-pm, linux-samsung-soc, linux-rtc,
linux-doc
In-Reply-To: <20260415-sensible-kiwi-of-argument-44d6ed@quoll>
On 2026-04-15 09:03 +02:00, Krzysztof Kozlowski wrote:
> On Tue, Apr 14, 2026 at 12:02:54PM +0530, Kaustabh Chakraborty wrote:
>> +description: |
>> + The Samsung S2M series PMIC RGB LED is a three-channel LED device with
>> + 8-bit brightness control for each channel, typically used as status
>> + indicators in mobile phones.
>> +
>> + This is a part of device tree bindings for S2M and S5M family of Power
>> + Management IC (PMIC).
>> +
>> + See also Documentation/devicetree/bindings/mfd/samsung,s2mps11.yaml for
>> + additional information and example.
>> +
>> +allOf:
>> + - $ref: common.yaml#
>
> Rob's comment is still valid:
> 1. How do you address one of three LEDs in non-RGB case?
> 2. Where is multi-color?
Yes, multi-color should have been added here.
>
> And based on this alone without other properties, I say this should be
> part of top-level schema. Separate node is fine, but no need for
> separate binding.
BTW, for loading the sub-device driver via platform (as it won't be a
separate binding) the driver *must* be built-in. Although not related to
bindings, this seems counter-intuitive. I see the same problem with the
PMIC charger.
>
> Best regards,
> Krzysztof
^ permalink raw reply
* Re: [PATCH v3 3/3] dt-bindings: i3c: Add AST2600 I3C global registers
From: Dawid Glazik @ 2026-04-15 18:21 UTC (permalink / raw)
To: Krzysztof Kozlowski
Cc: Alexandre Belloni, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Joel Stanley, Andrew Jeffery, linux-aspeed, linux-i3c, devicetree,
linux-arm-kernel, Frank Li, Maciej Lawniczak
In-Reply-To: <d74e7aa8-1110-469a-ac7e-3829c2458852@kernel.org>
On 4/9/2026 9:30 AM, Krzysztof Kozlowski wrote:
> On 09/04/2026 09:28, Krzysztof Kozlowski wrote:
>> On Wed, Apr 08, 2026 at 10:34:35PM +0200, Dawid Glazik wrote:
>>> Introduce the device-tree bindings for I3C global registers found on
>>> AST2600 SoCs.
>>>
>>> Signed-off-by: Dawid Glazik <dawid.glazik@linux.intel.com>
>>> ---
>>> I wasn't sure if I should add newline at the end of the
>>> file or not so I took
>>> https://github.com/torvalds/linux/tree/master/Documentation/devicetree/bindings/i3c
>>> as an example.
>>
>> Answer is: you cannot have patch warnings.
>>
>> Documentation/devicetree/bindings/i3c does not have patch warning, does
>> it?
>
> And if you tested this code with standard tools, you would see that...
>
> Best regards,
> Krzysztof
Thank you for the review and feedback. This is my first contribution to
Linux kernel so I'm still learning the process and toolchain. I
apologize for the rookie mistakes. I will address all the issues you've
pointed out and resubmit the series.
Best regards,
Dawid
^ permalink raw reply
* Re: [PATCH] dt-bindings: firmware: qcom,scm: Document SCM on Hawi SoC
From: Rob Herring (Arm) @ 2026-04-15 20:30 UTC (permalink / raw)
To: Mukesh Ojha
Cc: Guru Das Srinagesh, linux-kernel, Konrad Dybcio, linux-arm-msm,
devicetree, Krzysztof Kozlowski, Bjorn Andersson, Robert Marko,
Conor Dooley
In-Reply-To: <20260401123825.589452-1-mukesh.ojha@oss.qualcomm.com>
On Wed, 01 Apr 2026 18:08:25 +0530, Mukesh Ojha wrote:
> Document SCM compatible for the Qualcomm Hawi SoC.
>
> Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
> ---
> Documentation/devicetree/bindings/firmware/qcom,scm.yaml | 2 ++
> 1 file changed, 2 insertions(+)
>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
^ permalink raw reply
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox