* [PATCH 2/3] arm64: dts: qcom: lemans: Add Draco EVK SoM platform
2026-10-19 10:27 [PATCH 0/3] Add support for LeMans Draco EVK board Gopikishan Thawre
2026-10-19 10:27 ` [PATCH 1/3] dt-bindings: arm: qcom: Add " Gopikishan Thawre
@ 2026-10-19 10:27 ` Gopikishan Thawre
2026-10-20 10:28 ` sashiko-bot
2026-10-19 10:27 ` [PATCH 3/3] arm64: dts: qcom: lemans: Add Draco EVK board Gopikishan Thawre
2 siblings, 1 reply; 9+ messages in thread
From: Gopikishan Thawre @ 2026-10-19 10:27 UTC (permalink / raw)
To: Bjorn Andersson, Konrad Dybcio, Abel Vesa, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Gopikishan Thawre,
Richard Cochran
Cc: linux-arm-msm, devicetree, linux-kernel, netdev, Kishor Buchi
Introduce the device tree for the SA8775P/QCS9100-based LeMans Draco
EVK SoM. The LeMans Draco SoM is a compact compute module integrating
the SA8775P SoC, three PMM8654AU PMICs, and essential connectivity,
designed to mount on carrier boards.
The initial SoM device tree includes basic support for:
- RPMH regulators for three PMM8654AU PMICs
- QUP firmware paths (qupv3_id_0/1/2)
- Remoteproc instances (ADSP, CDSP0/1, GPDSP0/1) with firmware paths
- Debug UART (uart10) and board clocks
- UFS storage
- USB 0, USB 1 (host mode) and USB 2 with HSPHY and QMP PHY supplies
- GPU (Adreno 663) with ZAP shader firmware
- Video processing unit (iris)
Co-developed-by: Kishor Buchi <kbuchi@qti.qualcomm.com>
Signed-off-by: Kishor Buchi <kbuchi@qti.qualcomm.com>
Signed-off-by: Gopikishan Thawre <gopikishan.thawre@oss.qualcomm.com>
---
arch/arm64/boot/dts/qcom/lemans-draco-evk-som.dtsi | 401 +++++++++++++++++++++
1 file changed, 401 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/lemans-draco-evk-som.dtsi b/arch/arm64/boot/dts/qcom/lemans-draco-evk-som.dtsi
new file mode 100644
index 000000000000..6b7971bcdc93
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/lemans-draco-evk-som.dtsi
@@ -0,0 +1,401 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "lemans.dtsi"
+#include "lemans-pmics.dtsi"
+
+/ {
+ aliases {
+ serial0 = &uart10;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&apps_rsc {
+ regulators-0 {
+ compatible = "qcom,pmm8654au-rpmh-regulators";
+ qcom,pmic-id = "a";
+
+ vreg_s4a: smps4 {
+ regulator-name = "vreg_s4a";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1816000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_s5a: smps5 {
+ regulator-name = "vreg_s5a";
+ regulator-min-microvolt = <1850000>;
+ regulator-max-microvolt = <1996000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_s9a: smps9 {
+ regulator-name = "vreg_s9a";
+ regulator-min-microvolt = <535000>;
+ regulator-max-microvolt = <1120000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l4a: ldo4 {
+ regulator-name = "vreg_l4a";
+ regulator-min-microvolt = <788000>;
+ regulator-max-microvolt = <1050000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l5a: ldo5 {
+ regulator-name = "vreg_l5a";
+ regulator-min-microvolt = <870000>;
+ regulator-max-microvolt = <950000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l6a: ldo6 {
+ regulator-name = "vreg_l6a";
+ regulator-min-microvolt = <870000>;
+ regulator-max-microvolt = <970000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l7a: ldo7 {
+ regulator-name = "vreg_l7a";
+ regulator-min-microvolt = <720000>;
+ regulator-max-microvolt = <950000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l8a: ldo8 {
+ regulator-name = "vreg_l8a";
+ regulator-min-microvolt = <2504000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l9a: ldo9 {
+ regulator-name = "vreg_l9a";
+ regulator-min-microvolt = <2970000>;
+ regulator-max-microvolt = <3544000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-1 {
+ compatible = "qcom,pmm8654au-rpmh-regulators";
+ qcom,pmic-id = "c";
+
+ vreg_l1c: ldo1 {
+ regulator-name = "vreg_l1c";
+ regulator-min-microvolt = <1140000>;
+ regulator-max-microvolt = <1260000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2c: ldo2 {
+ regulator-name = "vreg_l2c";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3c: ldo3 {
+ regulator-name = "vreg_l3c";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l4c: ldo4 {
+ regulator-name = "vreg_l4c";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l5c: ldo5 {
+ regulator-name = "vreg_l5c";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l6c: ldo6 {
+ regulator-name = "vreg_l6c";
+ regulator-min-microvolt = <1620000>;
+ regulator-max-microvolt = <1980000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l7c: ldo7 {
+ regulator-name = "vreg_l7c";
+ regulator-min-microvolt = <1620000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l8c: ldo8 {
+ regulator-name = "vreg_l8c";
+ regulator-min-microvolt = <2400000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l9c: ldo9 {
+ regulator-name = "vreg_l9c";
+ regulator-min-microvolt = <1650000>;
+ regulator-max-microvolt = <2700000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-2 {
+ compatible = "qcom,pmm8654au-rpmh-regulators";
+ qcom,pmic-id = "e";
+
+ vreg_s4e: smps4 {
+ regulator-name = "vreg_s4e";
+ regulator-min-microvolt = <970000>;
+ regulator-max-microvolt = <1520000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_s7e: smps7 {
+ regulator-name = "vreg_s7e";
+ regulator-min-microvolt = <1010000>;
+ regulator-max-microvolt = <1170000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_s9e: smps9 {
+ regulator-name = "vreg_s9e";
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <570000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l6e: ldo6 {
+ regulator-name = "vreg_l6e";
+ regulator-min-microvolt = <1280000>;
+ regulator-max-microvolt = <1450000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l8e: ldo8 {
+ regulator-name = "vreg_l8e";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1950000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+};
+
+&gpu {
+ status = "okay";
+};
+
+&gpu_zap_shader {
+ firmware-name = "qcom/sa8775p/a663_zap.mbn";
+};
+
+&iris {
+ firmware-name = "qcom/vpu/vpu30_p4_s6_16mb.mbn";
+
+ status = "okay";
+};
+
+&pmm8654au_0_pon_resin {
+ linux,code = <KEY_VOLUMEDOWN>;
+
+ status = "okay";
+};
+
+&qupv3_id_0 {
+ firmware-name = "qcom/sa8775p/qupv3fw.elf";
+
+ status = "okay";
+};
+
+&qupv3_id_1 {
+ firmware-name = "qcom/sa8775p/qupv3fw.elf";
+
+ status = "okay";
+};
+
+&qupv3_id_2 {
+ firmware-name = "qcom/sa8775p/qupv3fw.elf";
+
+ status = "okay";
+};
+
+&remoteproc_adsp {
+ firmware-name = "qcom/sa8775p/adsp.mbn";
+
+ status = "okay";
+};
+
+&remoteproc_cdsp0 {
+ firmware-name = "qcom/sa8775p/cdsp0.mbn";
+
+ status = "okay";
+};
+
+&remoteproc_cdsp1 {
+ firmware-name = "qcom/sa8775p/cdsp1.mbn";
+
+ status = "okay";
+};
+
+&remoteproc_gpdsp0 {
+ firmware-name = "qcom/sa8775p/gpdsp0.mbn";
+
+ status = "okay";
+};
+
+&remoteproc_gpdsp1 {
+ firmware-name = "qcom/sa8775p/gpdsp1.mbn";
+
+ status = "okay";
+};
+
+&sleep_clk {
+ clock-frequency = <32768>;
+};
+
+&uart10 {
+ compatible = "qcom,geni-debug-uart";
+ pinctrl-0 = <&qup_uart10_default>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&ufs_mem_hc {
+ reset-gpios = <&tlmm 149 GPIO_ACTIVE_LOW>;
+ vcc-supply = <&vreg_l8a>;
+ vcc-max-microamp = <1100000>;
+ vccq-supply = <&vreg_l4c>;
+ vccq-max-microamp = <1200000>;
+
+ status = "okay";
+};
+
+&ufs_mem_phy {
+ vdda-phy-supply = <&vreg_l4a>;
+ vdda-pll-supply = <&vreg_l1c>;
+
+ status = "okay";
+};
+
+&usb_0 {
+ status = "okay";
+};
+
+&usb_0_hsphy {
+ vdda-pll-supply = <&vreg_l7a>;
+ vdda18-supply = <&vreg_l6c>;
+ vdda33-supply = <&vreg_l9a>;
+
+ status = "okay";
+};
+
+&usb_0_qmpphy {
+ vdda-phy-supply = <&vreg_l1c>;
+ vdda-pll-supply = <&vreg_l7a>;
+
+ status = "okay";
+};
+
+&usb_1 {
+ dr_mode = "host";
+
+ status = "okay";
+};
+
+&usb_1_hsphy {
+ vdda-pll-supply = <&vreg_l7a>;
+ vdda18-supply = <&vreg_l6c>;
+ vdda33-supply = <&vreg_l9a>;
+
+ status = "okay";
+};
+
+&usb_1_qmpphy {
+ vdda-phy-supply = <&vreg_l1c>;
+ vdda-pll-supply = <&vreg_l7a>;
+
+ status = "okay";
+};
+
+&usb_2 {
+ status = "okay";
+};
+
+&usb_2_hsphy {
+ vdda-pll-supply = <&vreg_l7a>;
+ vdda18-supply = <&vreg_l6c>;
+ vdda33-supply = <&vreg_l9a>;
+
+ status = "okay";
+};
+
+&xo_board_clk {
+ clock-frequency = <38400000>;
+};
--
2.43.0
^ permalink raw reply related [flat|nested] 9+ messages in thread* [PATCH 3/3] arm64: dts: qcom: lemans: Add Draco EVK board
2026-10-19 10:27 [PATCH 0/3] Add support for LeMans Draco EVK board Gopikishan Thawre
2026-10-19 10:27 ` [PATCH 1/3] dt-bindings: arm: qcom: Add " Gopikishan Thawre
2026-10-19 10:27 ` [PATCH 2/3] arm64: dts: qcom: lemans: Add Draco EVK SoM platform Gopikishan Thawre
@ 2026-10-19 10:27 ` Gopikishan Thawre
2026-10-19 12:05 ` Dmitry Baryshkov
` (2 more replies)
2 siblings, 3 replies; 9+ messages in thread
From: Gopikishan Thawre @ 2026-10-19 10:27 UTC (permalink / raw)
To: Bjorn Andersson, Konrad Dybcio, Abel Vesa, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Gopikishan Thawre,
Richard Cochran
Cc: linux-arm-msm, devicetree, linux-kernel, netdev, Vishnu Saini,
Khalid Faisal Ansari, Ajinkya Inchure, Anuj Tripathi
Add the device tree for the LeMans Draco EVK platform which combines
the LeMans Draco EVK SoM and Draco carrier board.
This device tree adds board-specific peripheral configuration on top
of the SoM, including:
- I2C GPIO expanders (TCA6416/PCA9534) on i2c2 and i2c18
- EEPROM with MAC address nvmem layout on i2c18
- Native DisplayPort output (DP0-DP3)
- Dual Ethernet (ethernet0/ethernet1) with HSGMII PHY over SerDes
- ST33HTPM TPM over SPI16
- AMC6821 fan controller on i2c4
Co-developed-by: Vishnu Saini <vishnu.saini@oss.qualcomm.com>
Signed-off-by: Vishnu Saini <vishnu.saini@oss.qualcomm.com>
Co-developed-by: Khalid Faisal Ansari <khalid.ansari@oss.qualcomm.com>
Signed-off-by: Khalid Faisal Ansari <khalid.ansari@oss.qualcomm.com>
Co-developed-by: Ajinkya Inchure <ainchure@qti.qualcomm.com>
Signed-off-by: Ajinkya Inchure <ainchure@qti.qualcomm.com>
Co-developed-by: Anuj Tripathi <anuj.tripathi@oss.qualcomm.com>
Signed-off-by: Anuj Tripathi <anuj.tripathi@oss.qualcomm.com>
Signed-off-by: Gopikishan Thawre <gopikishan.thawre@oss.qualcomm.com>
---
arch/arm64/boot/dts/qcom/Makefile | 5 +
arch/arm64/boot/dts/qcom/lemans-draco-evk.dts | 543 ++++++++++++++++++++++++++
2 files changed, 548 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 4e714251d5e6..f1713d53af5f 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -50,6 +50,11 @@ dtb-$(CONFIG_ARCH_QCOM) += ipq9650-rdp488.dtb
dtb-$(CONFIG_ARCH_QCOM) += kaanapali-mtp.dtb
dtb-$(CONFIG_ARCH_QCOM) += kaanapali-qrd.dtb
dtb-$(CONFIG_ARCH_QCOM) += lemans-evk.dtb
+dtb-$(CONFIG_ARCH_QCOM) += lemans-draco-evk.dtb
+
+lemans-draco-evk-el2-dtbs := lemans-draco-evk.dtb lemans-el2.dtbo
+
+dtb-$(CONFIG_ARCH_QCOM) += lemans-draco-evk-el2.dtb
lemans-evk-camera-csi1-imx577-dtbs := lemans-evk.dtb lemans-evk-camera-csi1-imx577.dtbo
lemans-evk-camera-dtbs := lemans-evk.dtb lemans-evk-camera.dtbo
diff --git a/arch/arm64/boot/dts/qcom/lemans-draco-evk.dts b/arch/arm64/boot/dts/qcom/lemans-draco-evk.dts
new file mode 100644
index 000000000000..5238157ad002
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/lemans-draco-evk.dts
@@ -0,0 +1,543 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
+ */
+/dts-v1/;
+
+#include <dt-bindings/pwm/pwm.h>
+#include "lemans-draco-evk-som.dtsi"
+
+/ {
+ model = "Qualcomm Technologies, Inc. Lemans Draco EVK";
+ compatible = "qcom,lemans-draco-evk", "qcom,qcs9100",
+ "qcom,sa8775p";
+ chassis-type = "embedded";
+
+ aliases {
+ ethernet0 = ðernet0;
+ ethernet1 = ðernet1;
+ };
+
+ dp0-connector {
+ compatible = "dp-connector";
+ label = "DP0";
+ type = "full-size";
+
+ dp-pwr-supply = <&vreg_dp0_pwr>;
+
+ port {
+ dp0_connector_in: endpoint {
+ remote-endpoint = <&mdss0_dp0_out>;
+ };
+ };
+ };
+
+ dp1-connector {
+ compatible = "dp-connector";
+ label = "DP1";
+ type = "full-size";
+
+ dp-pwr-supply = <&vreg_dp1_pwr>;
+
+ port {
+ dp1_connector_in: endpoint {
+ remote-endpoint = <&mdss0_dp1_out>;
+ };
+ };
+ };
+
+ dp2-connector {
+ compatible = "dp-connector";
+ label = "DP2";
+ type = "full-size";
+
+ dp-pwr-supply = <&vreg_dp2_pwr>;
+
+ port {
+ dp2_connector_in: endpoint {
+ remote-endpoint = <&mdss1_dp0_out>;
+ };
+ };
+ };
+
+ dp3-connector {
+ compatible = "dp-connector";
+ label = "DP3";
+ type = "full-size";
+
+ dp-pwr-supply = <&vreg_dp3_pwr>;
+
+ port {
+ dp3_connector_in: endpoint {
+ remote-endpoint = <&mdss1_dp1_out>;
+ };
+ };
+ };
+
+ vreg_dp0_pwr: regulator-dp0-pwr {
+ compatible = "regulator-fixed";
+ regulator-name = "VREG_DP0_PWR_3P3";
+
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&expander1 7 GPIO_ACTIVE_HIGH>;
+ };
+
+ vreg_dp1_pwr: regulator-dp1-pwr {
+ compatible = "regulator-fixed";
+ regulator-name = "VREG_DP1_PWR_3P3";
+
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&expander1 8 GPIO_ACTIVE_HIGH>;
+ };
+
+ vreg_dp2_pwr: regulator-dp2-pwr {
+ compatible = "regulator-fixed";
+ regulator-name = "VREG_DP2_PWR_3P3";
+
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&expander1 9 GPIO_ACTIVE_HIGH>;
+ };
+
+ vreg_dp3_pwr: regulator-dp3-pwr {
+ compatible = "regulator-fixed";
+ regulator-name = "VREG_DP3_PWR_3P3";
+
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&expander1 10 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+&i2c2 {
+ status = "okay";
+
+ expander0: gpio@20 {
+ compatible = "ti,tca6416";
+ reg = <0x20>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ };
+
+ expander1: gpio@21 {
+ compatible = "ti,tca6416";
+ reg = <0x21>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ };
+
+ expander2: gpio@22 {
+ compatible = "ti,tca6416";
+ reg = <0x22>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ };
+
+ expander3: gpio@23 {
+ compatible = "ti,tca6416";
+ reg = <0x23>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ };
+
+ expander4: gpio@38 {
+ compatible = "nxp,pca9534";
+ reg = <0x38>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ };
+};
+
+&tlmm {
+
+ dp2_hot_plug_det: dp2-hot-plug-det-state {
+ pins = "gpio104";
+ function = "edp2_hot";
+ bias-disable;
+ };
+
+ dp3_hot_plug_det: dp3-hot-plug-det-state {
+ pins = "gpio103";
+ function = "edp3_hot";
+ bias-disable;
+ };
+
+ ethernet0_default: ethernet0-default-state {
+ ethernet0_mdc: ethernet0-mdc-pins {
+ pins = "gpio8";
+ function = "emac0_mdc";
+ drive-strength = <16>;
+ bias-pull-up;
+ };
+
+ ethernet0_mdio: ethernet0-mdio-pins {
+ pins = "gpio9";
+ function = "emac0_mdio";
+ drive-strength = <16>;
+ bias-pull-up;
+ };
+ };
+
+ ethernet1_default: ethernet1-default-state {
+ ethernet1_mdc: ethernet1-mdc-pins {
+ pins = "gpio20";
+ function = "emac1_mdc";
+ drive-strength = <16>;
+ bias-pull-up;
+ };
+
+ ethernet1_mdio: ethernet1-mdio-pins {
+ pins = "gpio21";
+ function = "emac1_mdio";
+ drive-strength = <16>;
+ bias-pull-up;
+ };
+ };
+
+};
+
+&i2c18 {
+ status = "okay";
+
+ expander5: gpio@3c {
+ compatible = "nxp,pca9534";
+ reg = <0x3c>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ };
+
+ eeprom@50 {
+ compatible = "giantec,gt24c256c", "atmel,24c256";
+ reg = <0x50>;
+ pagesize = <64>;
+
+ nvmem-layout {
+ compatible = "fixed-layout";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ mac_addr0: mac-addr@0 {
+ reg = <0x0 0x6>;
+ };
+
+ mac_addr1: mac-addr@6 {
+ reg = <0x6 0x6>;
+ };
+ };
+ };
+};
+
+&i2c4 {
+ status = "okay";
+
+ fan_controller: fan@1a {
+ compatible = "ti,amc6821";
+ reg = <0x1a>;
+ #pwm-cells = <2>;
+
+ fan {
+ pwms = <&fan_controller 40000 PWM_POLARITY_INVERTED>;
+ };
+ };
+};
+
+&qup_i2c4_default {
+ drive-strength = <6>;
+ bias-pull-up;
+};
+
+&spi16 {
+ status = "okay";
+
+ tpm@0 {
+ compatible = "st,st33htpm-spi", "tcg,tpm_tis-spi";
+ reg = <0>;
+ spi-max-frequency = <20000000>;
+ };
+};
+
+&mdss0 {
+ status = "okay";
+};
+
+&mdss0_dp0 {
+ pinctrl-0 = <&dp0_hot_plug_det>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&mdss0_dp0_out {
+ data-lanes = <0 1 2 3>;
+ link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+
+ remote-endpoint = <&dp0_connector_in>;
+};
+
+&mdss0_dp0_phy {
+ vdda-phy-supply = <&vreg_l1c>;
+ vdda-pll-supply = <&vreg_l4a>;
+
+ status = "okay";
+};
+
+&mdss0_dp1 {
+ pinctrl-0 = <&dp1_hot_plug_det>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&mdss0_dp1_out {
+ data-lanes = <0 1 2 3>;
+ link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+
+ remote-endpoint = <&dp1_connector_in>;
+};
+
+&mdss0_dp1_phy {
+ vdda-phy-supply = <&vreg_l1c>;
+ vdda-pll-supply = <&vreg_l4a>;
+
+ status = "okay";
+};
+
+&mdss1 {
+ status = "okay";
+};
+
+&mdss1_dp0 {
+ pinctrl-0 = <&dp2_hot_plug_det>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&mdss1_dp0_out {
+ data-lanes = <0 1 2 3>;
+ link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+
+ remote-endpoint = <&dp2_connector_in>;
+};
+
+&mdss1_dp0_phy {
+ vdda-phy-supply = <&vreg_l1c>;
+ vdda-pll-supply = <&vreg_l4a>;
+
+ status = "okay";
+};
+
+&mdss1_dp1 {
+ pinctrl-0 = <&dp3_hot_plug_det>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&mdss1_dp1_out {
+ data-lanes = <0 1 2 3>;
+ link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+
+ remote-endpoint = <&dp3_connector_in>;
+};
+
+&mdss1_dp1_phy {
+ vdda-phy-supply = <&vreg_l1c>;
+ vdda-pll-supply = <&vreg_l4a>;
+
+ status = "okay";
+};
+
+ðernet0 {
+ phy-handle = <&hsgmii_phy0>;
+ phy-mode = "2500base-x";
+
+ pinctrl-0 = <ðernet0_default>;
+ pinctrl-names = "default";
+
+ snps,mtl-rx-config = <&mtl_rx_setup>;
+ snps,mtl-tx-config = <&mtl_tx_setup>;
+
+ nvmem-cells = <&mac_addr0>;
+ nvmem-cell-names = "mac-address";
+
+ status = "okay";
+
+ mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hsgmii_phy0: ethernet-phy {
+ compatible = "ethernet-phy-id004d.d101";
+ reg = <0x1c>;
+ reset-gpios = <&pmm8654au_2_gpios 8 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <11000>;
+ reset-deassert-us = <70000>;
+ };
+ };
+
+ mtl_rx_setup: rx-queues-config {
+ snps,rx-queues-to-use = <4>;
+ snps,rx-sched-sp;
+
+ queue0 {
+ snps,dcb-algorithm;
+ snps,map-to-dma-channel = <0x0>;
+ snps,route-up;
+ snps,priority = <0x1>;
+ };
+
+ queue1 {
+ snps,dcb-algorithm;
+ snps,map-to-dma-channel = <0x1>;
+ snps,route-ptp;
+ };
+
+ queue2 {
+ snps,avb-algorithm;
+ snps,map-to-dma-channel = <0x2>;
+ snps,route-avcp;
+ };
+
+ queue3 {
+ snps,avb-algorithm;
+ snps,map-to-dma-channel = <0x3>;
+ snps,priority = <0xc>;
+ };
+ };
+
+ mtl_tx_setup: tx-queues-config {
+ snps,tx-queues-to-use = <4>;
+
+ queue0 {
+ snps,dcb-algorithm;
+ };
+
+ queue1 {
+ snps,dcb-algorithm;
+ };
+
+ queue2 {
+ snps,avb-algorithm;
+ snps,send_slope = <0x1000>;
+ snps,idle_slope = <0x1000>;
+ snps,high_credit = <0x3e800>;
+ snps,low_credit = <0xffc18000>;
+ };
+
+ queue3 {
+ snps,avb-algorithm;
+ snps,send_slope = <0x1000>;
+ snps,idle_slope = <0x1000>;
+ snps,high_credit = <0x3e800>;
+ snps,low_credit = <0xffc18000>;
+ };
+ };
+};
+
+ðernet1 {
+ phy-handle = <&hsgmii_phy1>;
+ phy-mode = "2500base-x";
+
+ pinctrl-0 = <ðernet1_default>;
+ pinctrl-names = "default";
+
+ snps,mtl-rx-config = <&mtl_rx_setup1>;
+ snps,mtl-tx-config = <&mtl_tx_setup1>;
+
+ nvmem-cells = <&mac_addr1>;
+ nvmem-cell-names = "mac-address";
+
+ status = "okay";
+
+ mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hsgmii_phy1: ethernet-phy {
+ compatible = "ethernet-phy-id004d.d101";
+ reg = <0x1c>;
+ reset-gpios = <&pmm8654au_2_gpios 9 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <11000>;
+ reset-deassert-us = <70000>;
+ };
+ };
+
+ mtl_rx_setup1: rx-queues-config {
+ snps,rx-queues-to-use = <4>;
+ snps,rx-sched-sp;
+
+ queue0 {
+ snps,dcb-algorithm;
+ snps,map-to-dma-channel = <0x0>;
+ snps,route-up;
+ snps,priority = <0x1>;
+ };
+
+ queue1 {
+ snps,dcb-algorithm;
+ snps,map-to-dma-channel = <0x1>;
+ snps,route-ptp;
+ };
+
+ queue2 {
+ snps,avb-algorithm;
+ snps,map-to-dma-channel = <0x2>;
+ snps,route-avcp;
+ };
+
+ queue3 {
+ snps,avb-algorithm;
+ snps,map-to-dma-channel = <0x3>;
+ snps,priority = <0xc>;
+ };
+ };
+
+ mtl_tx_setup1: tx-queues-config {
+ snps,tx-queues-to-use = <4>;
+
+ queue0 {
+ snps,dcb-algorithm;
+ };
+
+ queue1 {
+ snps,dcb-algorithm;
+ };
+
+ queue2 {
+ snps,avb-algorithm;
+ snps,send_slope = <0x1000>;
+ snps,idle_slope = <0x1000>;
+ snps,high_credit = <0x3e800>;
+ snps,low_credit = <0xffc18000>;
+ };
+
+ queue3 {
+ snps,avb-algorithm;
+ snps,send_slope = <0x1000>;
+ snps,idle_slope = <0x1000>;
+ snps,high_credit = <0x3e800>;
+ snps,low_credit = <0xffc18000>;
+ };
+ };
+};
+
+&serdes0 {
+ phy-supply = <&vreg_l5a>;
+
+ status = "okay";
+};
+
+&serdes1 {
+ phy-supply = <&vreg_l5a>;
+
+ status = "okay";
+};
--
2.43.0
^ permalink raw reply related [flat|nested] 9+ messages in thread