[PATCH v3 3/4] Documentation: rs485: Mention uart_get_rs485_mode()

["Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>]

Add to rs485 documentation that serial core prepares the struct
serial_rs485 when uart_get_rs485_mode() is called. Remove the wrong
claim that driver must fill it by itself.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
---
 Documentation/driver-api/serial/serial-rs485.rst | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/Documentation/driver-api/serial/serial-rs485.rst b/Documentation/driver-api/serial/serial-rs485.rst
index 513758a702a6..2951dacfb9eb 100644
--- a/Documentation/driver-api/serial/serial-rs485.rst
+++ b/Documentation/driver-api/serial/serial-rs485.rst
@@ -34,8 +34,8 @@ RS485 Serial Communications
    parameters in the platform data and in ioctls.
 
    The device tree can also provide RS485 boot time parameters
-   [#DT-bindings]_. The driver is in charge of filling this data structure
-   from the values given by the device tree.
+   [#DT-bindings]_. The serial core fills the struct serial_rs485 from the
+   values given by the device tree when driver calls uart_get_rs485_mode().
 
    Any driver for devices capable of working both as RS232 and RS485 should
    implement the rs485_config callback and provide rs485_supported in the
@@ -48,7 +48,7 @@ RS485 Serial Communications
    serial_rs485 structure matching to the current configuration.
 
 .. kernel-doc:: include/uapi/linux/serial.h
-   :identifiers: serial_rs485
+   :identifiers: serial_rs485 uart_get_rs485_mode
 
 4. Usage from user-level
 ========================
-- 
2.30.2