[PATCH 4/7] iio: imu: adis: Add DIAG_STAT register size

[Robert Budai <robert.budai@analog.com>]

Some devices may have more than 16 bits of status. This patch allows the
user to specify the size of the DIAG_STAT register. It defaults to 2 if
not specified. This is mainly for backward compatibility.

Co-developed-by: Ramona Gradinariu <ramona.gradinariu@analog.com>
Signed-off-by: Ramona Gradinariu <ramona.gradinariu@analog.com>
Co-developed-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Robert Budai <robert.budai@analog.com>
---

v2:
- removed default 2 byte STAT_REG length
- used already defined MACROS
- signed of by submitter

 drivers/iio/imu/adis.c       | 11 ++++++++---
 include/linux/iio/imu/adis.h |  2 ++
 2 files changed, 10 insertions(+), 3 deletions(-)

diff --git a/drivers/iio/imu/adis.c b/drivers/iio/imu/adis.c
index 865f7c56717a..29998f3b29f4 100644
--- a/drivers/iio/imu/adis.c
+++ b/drivers/iio/imu/adis.c
@@ -304,11 +304,15 @@ EXPORT_SYMBOL_NS(__adis_enable_irq, IIO_ADISLIB);
  */
 int __adis_check_status(struct adis *adis)
 {
-	u16 status;
+	unsigned int status;
 	int ret;
 	int i;
 
-	ret = __adis_read_reg_16(adis, adis->data->diag_stat_reg, &status);
+	if (adis->data->diag_stat_size)
+		ret = adis->ops->read(adis, adis->data->diag_stat_reg, &status,
+				      adis->data->diag_stat_size);
+	else
+		ret = __adis_read_reg_16(adis, adis->data->diag_stat_reg, (u16 *)&status);
 	if (ret)
 		return ret;
 
@@ -317,7 +321,8 @@ int __adis_check_status(struct adis *adis)
 	if (status == 0)
 		return 0;
 
-	for (i = 0; i < 16; ++i) {
+	for (i = 0; i < BITS_PER_BYTE * ((adis->data->diag_stat_size) ?
+					 adis->data->diag_stat_size : 2); ++i) {
 		if (status & BIT(i)) {
 			dev_err(&adis->spi->dev, "%s.\n",
 				adis->data->status_error_msgs[i]);
diff --git a/include/linux/iio/imu/adis.h b/include/linux/iio/imu/adis.h
index 52652f51db2e..b888b22f5c8c 100644
--- a/include/linux/iio/imu/adis.h
+++ b/include/linux/iio/imu/adis.h
@@ -44,6 +44,7 @@ struct adis_timeout {
  * @glob_cmd_reg: Register address of the GLOB_CMD register
  * @msc_ctrl_reg: Register address of the MSC_CTRL register
  * @diag_stat_reg: Register address of the DIAG_STAT register
+ * @diag_stat_size: Length (in bytes) of the DIAG_STAT register.
  * @prod_id_reg: Register address of the PROD_ID register
  * @prod_id: Product ID code that should be expected when reading @prod_id_reg
  * @self_test_mask: Bitmask of supported self-test operations
@@ -70,6 +71,7 @@ struct adis_data {
 	unsigned int glob_cmd_reg;
 	unsigned int msc_ctrl_reg;
 	unsigned int diag_stat_reg;
+	unsigned int diag_stat_size;
 	unsigned int prod_id_reg;
 
 	unsigned int prod_id;
-- 
2.34.1