From: Robert Budai <robert.budai@analog.com>
To: Lars-Peter Clausen <lars@metafoo.de>,
Michael Hennerich <Michael.Hennerich@analog.com>,
Nuno Sa <nuno.sa@analog.com>,
"Ramona Gradinariu" <ramona.gradinariu@analog.com>,
Antoniu Miclaus <antoniu.miclaus@analog.com>,
Jonathan Cameron <jic23@kernel.org>,
"Rob Herring" <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
"Conor Dooley" <conor+dt@kernel.org>,
Jonathan Corbet <corbet@lwn.net>,
Robert Budai <robert.budai@analog.com>,
<linux-iio@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-kernel@vger.kernel.org>, <linux-doc@vger.kernel.org>
Subject: [PATCH 5/7] dt-bindings: iio: Add adis16550 bindings
Date: Mon, 25 Nov 2024 15:35:12 +0200 [thread overview]
Message-ID: <20241125133520.24328-6-robert.budai@analog.com> (raw)
In-Reply-To: <20241125133520.24328-1-robert.budai@analog.com>
Document the ADIS16550 device devicetree bindings.
Co-developed-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Signed-off-by: Ramona Gradinariu <ramona.gradinariu@analog.com>
Signed-off-by: Robert Budai <robert.budai@analog.com>
---
v2:
- signed of by submitter
.../bindings/iio/imu/adi,adis16550.yaml | 97 +++++++++++++++++++
MAINTAINERS | 9 ++
2 files changed, 106 insertions(+)
create mode 100644 Documentation/devicetree/bindings/iio/imu/adi,adis16550.yaml
diff --git a/Documentation/devicetree/bindings/iio/imu/adi,adis16550.yaml b/Documentation/devicetree/bindings/iio/imu/adi,adis16550.yaml
new file mode 100644
index 000000000000..767b500afbaa
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/imu/adi,adis16550.yaml
@@ -0,0 +1,97 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/imu/adi,adis16550.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices ADIS16550 and similar IMUs
+
+maintainers:
+ - Nuno Sa <nuno.sa@analog.com>
+ - Ramona Gradinariu <ramona.gradinariu@analog.com>
+ - Antoniu Miclaus <antoniu.miclaus@analog.com>
+
+properties:
+ compatible:
+ enum:
+ - adi,adis16550
+ - adi,adis16550w
+
+ reg:
+ maxItems: 1
+
+ spi-cpha: true
+
+ spi-cpol: true
+
+ spi-max-frequency:
+ maximum: 15000000
+
+ vdd-supply: true
+
+ interrupts:
+ maxItems: 1
+
+ reset-gpios:
+ description:
+ Must be the device tree identifier of the RESET pin. If specified,
+ it will be asserted during driver probe. As the line is active low,
+ it should be marked GPIO_ACTIVE_LOW.
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+ description: If not provided, then the internal clock is used.
+
+ adi,sync-mode:
+ $ref: /schemas/types.yaml#/definitions/string
+ description: |
+ Configures the device SYNC pin.
+ scaled_sync: Device handles internally custom scaled
+ sync mode. It is stored in a designated register.
+ enum:
+ - direct_sync
+ - scaled_sync
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - spi-cpha
+ - spi-cpol
+ - spi-max-frequency
+ - vdd-supply
+
+allOf:
+ - if:
+ properties:
+ adi,sync-mode:
+ enum: [direct_sync, scaled_sync]
+
+ then:
+ dependencies:
+ adi,sync-mode: [ clocks ]
+
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ imu@0 {
+ compatible = "adi,adis16550";
+ reg = <0>;
+ spi-max-frequency = <15000000>;
+ spi-cpol;
+ spi-cpha;
+ vdd-supply = <&vdd>;
+ interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-parent = <&gpio>;
+ };
+ };
+...
diff --git a/MAINTAINERS b/MAINTAINERS
index a4628d566e98..b8ea8c9af74a 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1412,6 +1412,15 @@ W: https://ez.analog.com/linux-software-drivers
F: Documentation/devicetree/bindings/iio/imu/adi,adis16475.yaml
F: drivers/iio/imu/adis16475.c
+ANALOG DEVICES INC ADIS16550 DRIVER
+M: Nuno Sa <nuno.sa@analog.com>
+M: Ramona Gradinariu <ramona.gradinariu@analog.com>
+M: Antoniu Miclaus <antoniu.miclaus@analog.com>
+L: linux-iio@vger.kernel.org
+S: Supported
+W: https://ez.analog.com/linux-software-drivers
+F: Documentation/devicetree/bindings/iio/imu/adi,adis16550.yaml
+
ANALOG DEVICES INC ADM1177 DRIVER
M: Michael Hennerich <Michael.Hennerich@analog.com>
L: linux-hwmon@vger.kernel.org
--
2.34.1
next prev parent reply other threads:[~2024-11-25 13:36 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-11-25 13:35 [PATCH 0/7] adis16550-v2 Robert Budai
2024-11-25 13:35 ` [PATCH 1/7] iio: imu: adis: Remove documented not used elements Robert Budai
2024-11-30 17:08 ` Jonathan Cameron
2024-11-25 13:35 ` [PATCH 2/7] iio: imu: adis: Add custom ops struct Robert Budai
2024-11-30 17:13 ` Jonathan Cameron
2024-11-25 13:35 ` [PATCH 3/7] iio: imu: adis: Add reset to custom ops Robert Budai
2024-11-30 17:12 ` Jonathan Cameron
2024-11-25 13:35 ` [PATCH 4/7] iio: imu: adis: Add DIAG_STAT register size Robert Budai
2024-11-25 13:35 ` Robert Budai [this message]
2024-11-25 13:46 ` [PATCH 5/7] dt-bindings: iio: Add adis16550 bindings Krzysztof Kozlowski
2024-11-25 13:35 ` [PATCH 6/7] iio: imu: adis16550: add adis16550 support Robert Budai
2024-11-25 13:47 ` Krzysztof Kozlowski
2024-11-30 17:31 ` Jonathan Cameron
2024-11-25 13:35 ` [PATCH 7/7] docs: iio: add documentation for adis16550 driver Robert Budai
2024-11-25 14:22 ` [PATCH 0/7] adis16550-v2 Budai, Robert
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241125133520.24328-6-robert.budai@analog.com \
--to=robert.budai@analog.com \
--cc=Michael.Hennerich@analog.com \
--cc=antoniu.miclaus@analog.com \
--cc=conor+dt@kernel.org \
--cc=corbet@lwn.net \
--cc=devicetree@vger.kernel.org \
--cc=jic23@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=lars@metafoo.de \
--cc=linux-doc@vger.kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nuno.sa@analog.com \
--cc=ramona.gradinariu@analog.com \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox