* [PATCH] ata: pata_legacy: remove documentation for removed module parameters
@ 2026-06-07 6:40 Ethan Nelson-Moore
2026-06-07 17:13 ` Randy Dunlap
2026-06-08 11:43 ` Damien Le Moal
0 siblings, 2 replies; 3+ messages in thread
From: Ethan Nelson-Moore @ 2026-06-07 6:40 UTC (permalink / raw)
To: linux-doc
Cc: Ethan Nelson-Moore, stable, Jonathan Corbet, Shuah Khan,
Damien Le Moal
Commit 3c4d783f6922 ("ata: pata_legacy: remove VLB support") removed
several module parameters from the pata_legacy driver, but neglected to
remove their documentation. Remove it.
Fixes: 3c4d783f6922 ("ata: pata_legacy: remove VLB support")
Cc: stable@vger.kernel.org # 7.0+
Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
---
.../admin-guide/kernel-parameters.txt | 37 -------------------
1 file changed, 37 deletions(-)
diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index 97007f4f69d4..47bccc148a54 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -4935,18 +4935,6 @@ Kernel parameters
Set to non-zero if a chip is present that snoops speed
changes. Disabled by default.
- pata_legacy.ht6560a= [HW,LIBATA]
- Format: <int>
- Set to 1, 2, or 3 for HT 6560A on the primary channel,
- the secondary channel, or both channels respectively.
- Disabled by default.
-
- pata_legacy.ht6560b= [HW,LIBATA]
- Format: <int>
- Set to 1, 2, or 3 for HT 6560B on the primary channel,
- the secondary channel, or both channels respectively.
- Disabled by default.
-
pata_legacy.iordy_mask= [HW,LIBATA]
Format: <int>
IORDY enable mask. Set individual bits to allow IORDY
@@ -4959,18 +4947,6 @@ Kernel parameters
with the sequence. By default IORDY is allowed across
all channels.
- pata_legacy.opti82c46x= [HW,LIBATA]
- Format: <int>
- Set to 1, 2, or 3 for Opti 82c611A on the primary
- channel, the secondary channel, or both channels
- respectively. Disabled by default.
-
- pata_legacy.opti82c611a= [HW,LIBATA]
- Format: <int>
- Set to 1, 2, or 3 for Opti 82c465MV on the primary
- channel, the secondary channel, or both channels
- respectively. Disabled by default.
-
pata_legacy.pio_mask= [HW,LIBATA]
Format: <int>
PIO mode mask for autospeed devices. Set individual
@@ -4994,19 +4970,6 @@ Kernel parameters
the first port in the list above (0x1f0), and so on.
By default all supported ports are probed.
- pata_legacy.qdi= [HW,LIBATA]
- Format: <int>
- Set to non-zero to probe QDI controllers. By default
- set to 1 if CONFIG_PATA_QDI_MODULE, 0 otherwise.
-
- pata_legacy.winbond= [HW,LIBATA]
- Format: <int>
- Set to non-zero to probe Winbond controllers. Use
- the standard I/O port (0x130) if 1, otherwise the
- value given is the I/O port to use (typically 0x1b0).
- By default set to 1 if CONFIG_PATA_WINBOND_VLB_MODULE,
- 0 otherwise.
-
pata_platform.pio_mask= [HW,LIBATA]
Format: <int>
Supported PIO mode mask. Set individual bits to allow
--
2.43.0
^ permalink raw reply related [flat|nested] 3+ messages in thread* Re: [PATCH] ata: pata_legacy: remove documentation for removed module parameters
2026-06-07 6:40 [PATCH] ata: pata_legacy: remove documentation for removed module parameters Ethan Nelson-Moore
@ 2026-06-07 17:13 ` Randy Dunlap
2026-06-08 11:43 ` Damien Le Moal
1 sibling, 0 replies; 3+ messages in thread
From: Randy Dunlap @ 2026-06-07 17:13 UTC (permalink / raw)
To: Ethan Nelson-Moore, linux-doc
Cc: stable, Jonathan Corbet, Shuah Khan, Damien Le Moal
On 6/6/26 11:40 PM, Ethan Nelson-Moore wrote:
> Commit 3c4d783f6922 ("ata: pata_legacy: remove VLB support") removed
> several module parameters from the pata_legacy driver, but neglected to
> remove their documentation. Remove it.
>
> Fixes: 3c4d783f6922 ("ata: pata_legacy: remove VLB support")
> Cc: stable@vger.kernel.org # 7.0+
> Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Thanks.
> ---
> .../admin-guide/kernel-parameters.txt | 37 -------------------
> 1 file changed, 37 deletions(-)
>
> diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
> index 97007f4f69d4..47bccc148a54 100644
> --- a/Documentation/admin-guide/kernel-parameters.txt
> +++ b/Documentation/admin-guide/kernel-parameters.txt
> @@ -4935,18 +4935,6 @@ Kernel parameters
> Set to non-zero if a chip is present that snoops speed
> changes. Disabled by default.
>
> - pata_legacy.ht6560a= [HW,LIBATA]
> - Format: <int>
> - Set to 1, 2, or 3 for HT 6560A on the primary channel,
> - the secondary channel, or both channels respectively.
> - Disabled by default.
> -
> - pata_legacy.ht6560b= [HW,LIBATA]
> - Format: <int>
> - Set to 1, 2, or 3 for HT 6560B on the primary channel,
> - the secondary channel, or both channels respectively.
> - Disabled by default.
> -
> pata_legacy.iordy_mask= [HW,LIBATA]
> Format: <int>
> IORDY enable mask. Set individual bits to allow IORDY
> @@ -4959,18 +4947,6 @@ Kernel parameters
> with the sequence. By default IORDY is allowed across
> all channels.
>
> - pata_legacy.opti82c46x= [HW,LIBATA]
> - Format: <int>
> - Set to 1, 2, or 3 for Opti 82c611A on the primary
> - channel, the secondary channel, or both channels
> - respectively. Disabled by default.
> -
> - pata_legacy.opti82c611a= [HW,LIBATA]
> - Format: <int>
> - Set to 1, 2, or 3 for Opti 82c465MV on the primary
> - channel, the secondary channel, or both channels
> - respectively. Disabled by default.
> -
> pata_legacy.pio_mask= [HW,LIBATA]
> Format: <int>
> PIO mode mask for autospeed devices. Set individual
> @@ -4994,19 +4970,6 @@ Kernel parameters
> the first port in the list above (0x1f0), and so on.
> By default all supported ports are probed.
>
> - pata_legacy.qdi= [HW,LIBATA]
> - Format: <int>
> - Set to non-zero to probe QDI controllers. By default
> - set to 1 if CONFIG_PATA_QDI_MODULE, 0 otherwise.
> -
> - pata_legacy.winbond= [HW,LIBATA]
> - Format: <int>
> - Set to non-zero to probe Winbond controllers. Use
> - the standard I/O port (0x130) if 1, otherwise the
> - value given is the I/O port to use (typically 0x1b0).
> - By default set to 1 if CONFIG_PATA_WINBOND_VLB_MODULE,
> - 0 otherwise.
> -
> pata_platform.pio_mask= [HW,LIBATA]
> Format: <int>
> Supported PIO mode mask. Set individual bits to allow
--
~Randy
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: [PATCH] ata: pata_legacy: remove documentation for removed module parameters
2026-06-07 6:40 [PATCH] ata: pata_legacy: remove documentation for removed module parameters Ethan Nelson-Moore
2026-06-07 17:13 ` Randy Dunlap
@ 2026-06-08 11:43 ` Damien Le Moal
1 sibling, 0 replies; 3+ messages in thread
From: Damien Le Moal @ 2026-06-08 11:43 UTC (permalink / raw)
To: Ethan Nelson-Moore, linux-doc; +Cc: stable, Jonathan Corbet, Shuah Khan
On 2026/06/07 14:40, Ethan Nelson-Moore wrote:
> Commit 3c4d783f6922 ("ata: pata_legacy: remove VLB support") removed
> several module parameters from the pata_legacy driver, but neglected to
> remove their documentation. Remove it.
>
> Fixes: 3c4d783f6922 ("ata: pata_legacy: remove VLB support")
> Cc: stable@vger.kernel.org # 7.0+
> Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
--
Damien Le Moal
Western Digital Research
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2026-06-08 11:43 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2026-06-07 6:40 [PATCH] ata: pata_legacy: remove documentation for removed module parameters Ethan Nelson-Moore
2026-06-07 17:13 ` Randy Dunlap
2026-06-08 11:43 ` Damien Le Moal
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox