[PATCH RESEND v6 02/18] EDAC/synopsys: Fix mci->scrub_cap field setting

[Serge Semin <fancer.lancer@gmail.com>]

The mem_ctl_info.scrub_cap field is supposed to be set with the ECC
scrub-related flags. Instead the driver erroneously initializes it with
the SCRUB_HW_SRC flag ID. It's definitely wrong, but it hasn't caused any
problem so far since the structure field isn't used by the EDAC core. Fix
it anyway by using the SCRUB_FLAG_HW_SRC macro to initialize the field.

Fixes: ae9b56e3996d ("EDAC, synps: Add EDAC support for zynq ddr ecc controller")
Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
---
 drivers/edac/synopsys_edac.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/edac/synopsys_edac.c b/drivers/edac/synopsys_edac.c
index b6bdbc1289f3..2b23d5ef9cff 100644
--- a/drivers/edac/synopsys_edac.c
+++ b/drivers/edac/synopsys_edac.c
@@ -855,7 +855,7 @@ static void mc_init(struct mem_ctl_info *mci, struct platform_device *pdev)
 	/* Initialize controller capabilities and configuration */
 	mci->mtype_cap = MEM_FLAG_DDR3 | MEM_FLAG_DDR2;
 	mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_SECDED;
-	mci->scrub_cap = SCRUB_HW_SRC;
+	mci->scrub_cap = SCRUB_FLAG_HW_SRC;
 	mci->scrub_mode = SCRUB_NONE;
 
 	mci->edac_cap = EDAC_FLAG_SECDED;
-- 
2.43.0