[PATCH RESEND v6 08/18] EDAC/synopsys: Drop struct ecc_error_info.blknr field

[Serge Semin <fancer.lancer@gmail.com>]

Even though the ECC(C|U)ADDR1 CSR description indeed says it's a "Block
number" in the DW uMCTL2 DDRC IP-core databooks, the corresponding
register field is named as ECC(C|U)ADDR1.ecc_(un)corr_col (which means ECC
(un)corrected column) and in the rest of the document it's referred as the
SDRAM address column. Thus use the already available ecc_error_info.col
field to read the column number to and drop the questionable
ecc_error_info.blknr field for good.

Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Shubhrajyoti Datta <shubhrajyoti.datta@amd.com>
---
 drivers/edac/synopsys_edac.c | 21 +++++++++------------
 1 file changed, 9 insertions(+), 12 deletions(-)

diff --git a/drivers/edac/synopsys_edac.c b/drivers/edac/synopsys_edac.c
index 230818a3969e..a874f6e4130d 100644
--- a/drivers/edac/synopsys_edac.c
+++ b/drivers/edac/synopsys_edac.c
@@ -173,7 +173,7 @@
 #define ECC_CEADDR0_RNK_MASK		BIT(24)
 #define ECC_CEADDR1_BNKGRP_MASK		0x3000000
 #define ECC_CEADDR1_BNKNR_MASK		0x70000
-#define ECC_CEADDR1_BLKNR_MASK		0xFFF
+#define ECC_CEADDR1_COL_MASK		0xFFF
 #define ECC_CEADDR1_BNKGRP_SHIFT	24
 #define ECC_CEADDR1_BNKNR_SHIFT		16
 
@@ -271,7 +271,6 @@
  * @bitpos:	Bit position.
  * @data:	Data causing the error.
  * @bankgrpnr:	Bank group number.
- * @blknr:	Block number.
  */
 struct ecc_error_info {
 	u32 row;
@@ -280,7 +279,6 @@ struct ecc_error_info {
 	u32 bitpos;
 	u32 data;
 	u32 bankgrpnr;
-	u32 blknr;
 };
 
 /**
@@ -433,7 +431,7 @@ static int zynqmp_get_error_info(struct synps_edac_priv *priv)
 					ECC_CEADDR1_BNKNR_SHIFT;
 	p->ceinfo.bankgrpnr = (regval &	ECC_CEADDR1_BNKGRP_MASK) >>
 					ECC_CEADDR1_BNKGRP_SHIFT;
-	p->ceinfo.blknr = (regval & ECC_CEADDR1_BLKNR_MASK);
+	p->ceinfo.col = (regval & ECC_CEADDR1_COL_MASK);
 	p->ceinfo.data = readl(base + ECC_CSYND0_OFST);
 	edac_dbg(2, "ECCCSYN0: 0x%08X ECCCSYN1: 0x%08X ECCCSYN2: 0x%08X\n",
 		 readl(base + ECC_CSYND0_OFST), readl(base + ECC_CSYND1_OFST),
@@ -449,7 +447,7 @@ static int zynqmp_get_error_info(struct synps_edac_priv *priv)
 					ECC_CEADDR1_BNKGRP_SHIFT;
 	p->ueinfo.bank = (regval & ECC_CEADDR1_BNKNR_MASK) >>
 					ECC_CEADDR1_BNKNR_SHIFT;
-	p->ueinfo.blknr = (regval & ECC_CEADDR1_BLKNR_MASK);
+	p->ueinfo.col = (regval & ECC_CEADDR1_COL_MASK);
 	p->ueinfo.data = readl(base + ECC_UESYND0_OFST);
 out:
 	spin_lock_irqsave(&priv->reglock, flags);
@@ -480,10 +478,9 @@ static void handle_error(struct mem_ctl_info *mci, struct synps_ecc_status *p)
 		pinf = &p->ceinfo;
 		if (priv->p_data->quirks & DDR_ECC_INTR_SUPPORT) {
 			snprintf(priv->message, SYNPS_EDAC_MSG_SIZE,
-				 "DDR ECC error type:%s Row %d Bank %d BankGroup Number %d Block Number %d Bit Position: %d Data: 0x%08x",
-				 "CE", pinf->row, pinf->bank,
-				 pinf->bankgrpnr, pinf->blknr,
-				 pinf->bitpos, pinf->data);
+				 "DDR ECC error type:%s Row %d Col %d Bank %d BankGroup Number %d Bit Position: %d Data: 0x%08x",
+				 "CE", pinf->row, pinf->col, pinf->bank,
+				 pinf->bankgrpnr, pinf->bitpos, pinf->data);
 		} else {
 			snprintf(priv->message, SYNPS_EDAC_MSG_SIZE,
 				 "DDR ECC error type:%s Row %d Bank %d Col %d Bit Position: %d Data: 0x%08x",
@@ -500,9 +497,9 @@ static void handle_error(struct mem_ctl_info *mci, struct synps_ecc_status *p)
 		pinf = &p->ueinfo;
 		if (priv->p_data->quirks & DDR_ECC_INTR_SUPPORT) {
 			snprintf(priv->message, SYNPS_EDAC_MSG_SIZE,
-				 "DDR ECC error type :%s Row %d Bank %d BankGroup Number %d Block Number %d",
-				 "UE", pinf->row, pinf->bank,
-				 pinf->bankgrpnr, pinf->blknr);
+				 "DDR ECC error type :%s Row %d Col %d Bank %d BankGroup Number %d",
+				 "UE", pinf->row, pinf->col, pinf->bank,
+				 pinf->bankgrpnr);
 		} else {
 			snprintf(priv->message, SYNPS_EDAC_MSG_SIZE,
 				 "DDR ECC error type :%s Row %d Bank %d Col %d ",
-- 
2.43.0