[PATCH] phylib: make mdio-gpio work without OF (v3)

[PATCH] phylib: make mdio-gpio work without OF (v3)

[Paulius Zaleckas]

make mdio-gpio work with non OpenFirmware gpio implementation.

Aditional changes to mdio-gpio:
- use gpio_request() and gpio_free()
- place irq[] array in struct mdio_gpio_info
- add module description, author and license
- add note about compiling this driver as module
- rename mdc and mdio function (were ugly names)
- change MII to MDIO in bus name
- add __init __exit to module (un)loading functions
- probe fails if no phys added to the bus
- kzalloc bitbang with sizeof(*bitbang)

Changes since v2:
- more #ifdefs reduction
- platform driver will be registered on OF platforms also
- unified platform and OF bus_id to phy%i

Changes since v1:
- removed NO_IRQ
- reduced #idefs

Laurent, please test this driver under OF.

Signed-off-by: Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
Cc: Laurent Pinchart <laurent.pinchart@skynet.be>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Mike Frysinger <vapier.adi@gmail.com>
---

 drivers/net/phy/Kconfig     |    5 +
 drivers/net/phy/mdio-gpio.c |  232 ++++++++++++++++++++++++++++++-------------
 include/linux/mdio-gpio.h   |   25 +++++
 3 files changed, 191 insertions(+), 71 deletions(-)
 create mode 100644 include/linux/mdio-gpio.h


diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index 0318077..c4c5a2f 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -86,8 +86,11 @@ config MDIO_BITBANG
 
 config MDIO_GPIO
 	tristate "Support for GPIO lib-based bitbanged MDIO buses"
-	depends on MDIO_BITBANG && OF_GPIO
+	depends on MDIO_BITBANG && GENERIC_GPIO
 	---help---
 	  Supports GPIO lib-based MDIO busses.
 
+	  To compile this driver as a module, choose M here: the module
+	  will be called mdio-gpio.
+
 endif # PHYLIB
diff --git a/drivers/net/phy/mdio-gpio.c b/drivers/net/phy/mdio-gpio.c
index 2ff9775..1a889fa 100644
--- a/drivers/net/phy/mdio-gpio.c
+++ b/drivers/net/phy/mdio-gpio.c
@@ -1,9 +1,12 @@
 /*
- * OpenFirmware GPIO based MDIO bitbang driver.
+ * GPIO based MDIO bitbang driver.
+ * Supports OpenFirmware.
  *
  * Copyright (c) 2008 CSE Semaphore Belgium.
  *  by Laurent Pinchart <laurentp@cse-semaphore.com>
  *
+ * Copyright (C) 2008, Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
+ *
  * Based on earlier work by
  *
  * Copyright (c) 2003 Intracom S.A.
@@ -21,9 +24,14 @@
 #include <linux/slab.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
-#include <linux/mdio-bitbang.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/mdio-gpio.h>
+
+#ifdef CONFIG_OF_GPIO
 #include <linux/of_gpio.h>
 #include <linux/of_platform.h>
+#endif
 
 struct mdio_gpio_info {
 	struct mdiobb_ctrl ctrl;
@@ -41,7 +49,7 @@ static void mdio_dir(struct mdiobb_ctrl *ctrl, int dir)
 		gpio_direction_input(bitbang->mdio);
 }
 
-static int mdio_read(struct mdiobb_ctrl *ctrl)
+static int mdio_get(struct mdiobb_ctrl *ctrl)
 {
 	struct mdio_gpio_info *bitbang =
 		container_of(ctrl, struct mdio_gpio_info, ctrl);
@@ -49,7 +57,7 @@ static int mdio_read(struct mdiobb_ctrl *ctrl)
 	return gpio_get_value(bitbang->mdio);
 }
 
-static void mdio(struct mdiobb_ctrl *ctrl, int what)
+static void mdio_set(struct mdiobb_ctrl *ctrl, int what)
 {
 	struct mdio_gpio_info *bitbang =
 		container_of(ctrl, struct mdio_gpio_info, ctrl);
@@ -57,7 +65,7 @@ static void mdio(struct mdiobb_ctrl *ctrl, int what)
 	gpio_set_value(bitbang->mdio, what);
 }
 
-static void mdc(struct mdiobb_ctrl *ctrl, int what)
+static void mdc_set(struct mdiobb_ctrl *ctrl, int what)
 {
 	struct mdio_gpio_info *bitbang =
 		container_of(ctrl, struct mdio_gpio_info, ctrl);
@@ -67,93 +75,69 @@ static void mdc(struct mdiobb_ctrl *ctrl, int what)
 
 static struct mdiobb_ops mdio_gpio_ops = {
 	.owner = THIS_MODULE,
-	.set_mdc = mdc,
+	.set_mdc = mdc_set,
 	.set_mdio_dir = mdio_dir,
-	.set_mdio_data = mdio,
-	.get_mdio_data = mdio_read,
+	.set_mdio_data = mdio_set,
+	.get_mdio_data = mdio_get,
 };
 
-static int __devinit mdio_ofgpio_bitbang_init(struct mii_bus *bus,
-                                         struct device_node *np)
-{
-	struct mdio_gpio_info *bitbang = bus->priv;
-
-	bitbang->mdc = of_get_gpio(np, 0);
-	bitbang->mdio = of_get_gpio(np, 1);
-
-	if (bitbang->mdc < 0 || bitbang->mdio < 0)
-		return -ENODEV;
-
-	snprintf(bus->id, MII_BUS_ID_SIZE, "%x", bitbang->mdc);
-	return 0;
-}
-
-static void __devinit add_phy(struct mii_bus *bus, struct device_node *np)
+static int __devinit mdio_gpio_bus_init(struct device *dev,
+					struct mdio_gpio_platform_data *pdata,
+					int bus_id)
 {
-	const u32 *data;
-	int len, id, irq;
-
-	data = of_get_property(np, "reg", &len);
-	if (!data || len != 4)
-		return;
-
-	id = *data;
-	bus->phy_mask &= ~(1 << id);
-
-	irq = of_irq_to_resource(np, 0, NULL);
-	if (irq != NO_IRQ)
-		bus->irq[id] = irq;
-}
-
-static int __devinit mdio_ofgpio_probe(struct of_device *ofdev,
-                                        const struct of_device_id *match)
-{
-	struct device_node *np = NULL;
 	struct mii_bus *new_bus;
 	struct mdio_gpio_info *bitbang;
 	int ret = -ENOMEM;
 	int i;
 
-	bitbang = kzalloc(sizeof(struct mdio_gpio_info), GFP_KERNEL);
+	bitbang = kzalloc(sizeof(*bitbang), GFP_KERNEL);
 	if (!bitbang)
 		goto out;
 
 	bitbang->ctrl.ops = &mdio_gpio_ops;
+	bitbang->mdc = pdata->mdc;
+	bitbang->mdio = pdata->mdio;
 
 	new_bus = alloc_mdio_bitbang(&bitbang->ctrl);
 	if (!new_bus)
 		goto out_free_bitbang;
 
-	new_bus->name = "GPIO Bitbanged MII",
+	new_bus->name = "GPIO Bitbanged MDIO",
 
-	ret = mdio_ofgpio_bitbang_init(new_bus, ofdev->node);
-	if (ret)
-		goto out_free_bus;
+	ret = -ENODEV;
 
-	new_bus->phy_mask = ~0;
-	new_bus->irq = kmalloc(sizeof(int) * PHY_MAX_ADDR, GFP_KERNEL);
-	if (!new_bus->irq)
+	new_bus->phy_mask = pdata->phy_mask;
+	new_bus->irq = pdata->irqs;
+	new_bus->parent = dev;
+
+	if (new_bus->phy_mask == ~0)
 		goto out_free_bus;
 
 	for (i = 0; i < PHY_MAX_ADDR; i++)
-		new_bus->irq[i] = -1;
+		if (!new_bus->irq[i])
+			new_bus->irq[i] = PHY_POLL;
 
-	while ((np = of_get_next_child(ofdev->node, np)))
-		if (!strcmp(np->type, "ethernet-phy"))
-			add_phy(new_bus, np);
+	snprintf(new_bus->id, MII_BUS_ID_SIZE, "phy%i", bus_id);
+
+	if (gpio_request(bitbang->mdc, "mdc"))
+		goto out_free_bus;
 
-	new_bus->parent = &ofdev->dev;
-	dev_set_drvdata(&ofdev->dev, new_bus);
+	if (gpio_request(bitbang->mdio, "mdio"))
+		goto out_free_mdc;
+
+	dev_set_drvdata(dev, new_bus);
 
 	ret = mdiobus_register(new_bus);
 	if (ret)
-		goto out_free_irqs;
+		goto out_free_all;
 
 	return 0;
 
-out_free_irqs:
-	dev_set_drvdata(&ofdev->dev, NULL);
-	kfree(new_bus->irq);
+out_free_all:
+	dev_set_drvdata(dev, NULL);
+	gpio_free(bitbang->mdio);
+out_free_mdc:
+	gpio_free(bitbang->mdc);
 out_free_bus:
 	free_mdio_bitbang(new_bus);
 out_free_bitbang:
@@ -162,16 +146,86 @@ out:
 	return ret;
 }
 
-static int mdio_ofgpio_remove(struct of_device *ofdev)
+static void __devexit mdio_gpio_bus_destroy(struct device *dev)
 {
-	struct mii_bus *bus = dev_get_drvdata(&ofdev->dev);
+	struct mii_bus *bus = dev_get_drvdata(dev);
 	struct mdio_gpio_info *bitbang = bus->priv;
 
 	mdiobus_unregister(bus);
-	kfree(bus->irq);
 	free_mdio_bitbang(bus);
-	dev_set_drvdata(&ofdev->dev, NULL);
+	dev_set_drvdata(dev, NULL);
+	gpio_free(bitbang->mdc);
+	gpio_free(bitbang->mdio);
 	kfree(bitbang);
+}
+
+static int __devinit mdio_gpio_probe(struct platform_device *pdev)
+{
+	struct mdio_gpio_platform_data *pdata = pdev->dev.platform_data;
+
+	if (!pdata)
+		return -ENODEV;
+
+	return mdio_gpio_bus_init(&pdev->dev, pdata, pdev->id);
+}
+
+static int __devexit mdio_gpio_remove(struct platform_device *pdev)
+{
+	mdio_gpio_bus_destroy(&pdev->dev);
+
+	return 0;
+}
+
+#ifdef CONFIG_OF_GPIO
+static void __devinit add_phy(struct mdio_gpio_platform_data *pdata,
+			      struct device_node *np)
+{
+	const u32 *data;
+	int len, id, irq;
+
+	data = of_get_property(np, "reg", &len);
+	if (!data || len != 4)
+		return;
+
+	id = *data;
+	pdata->phy_mask &= ~(1 << id);
+
+	irq = of_irq_to_resource(np, 0, NULL);
+	if (irq)
+		pdata->irqs[id] = irq;
+}
+
+static int __devinit mdio_ofgpio_probe(struct of_device *ofdev,
+                                        const struct of_device_id *match)
+{
+	struct device_node *np = NULL;
+	struct mdio_gpio_platform_data *pdata;
+
+	pdata = kzalloc(sizeof(*pdata), GFP_KERNEL);
+	if (!pdata)
+		return -ENOMEM;
+
+	pdata->mdc = of_get_gpio(ofdev->node, 0);
+	pdata->mdio = of_get_gpio(ofdev->node, 1);
+
+	if (pdata->mdc < 0 || pdata->mdio < 0)
+		goto out_free;
+
+	while ((np = of_get_next_child(ofdev->node, np)))
+		if (!strcmp(np->type, "ethernet-phy"))
+			add_phy(pdata, np);
+
+	return mdio_gpio_bus_init(&ofdev->dev, pdata, pdata->mdc);
+
+out_free:
+	kfree(pdata);
+	return -ENODEV;
+}
+
+static int __devexit mdio_ofgpio_remove(struct of_device *ofdev)
+{
+	mdio_gpio_bus_destroy(&ofdev->dev);
+	kfree(ofdev->dev.platform_data);
 
 	return 0;
 }
@@ -187,18 +241,56 @@ static struct of_platform_driver mdio_ofgpio_driver = {
 	.name = "mdio-gpio",
 	.match_table = mdio_ofgpio_match,
 	.probe = mdio_ofgpio_probe,
-	.remove = mdio_ofgpio_remove,
+	.remove = __devexit_p(mdio_ofgpio_remove),
 };
 
-static int mdio_ofgpio_init(void)
+static inline int __init mdio_ofgpio_init(void)
 {
 	return of_register_platform_driver(&mdio_ofgpio_driver);
 }
 
-static void mdio_ofgpio_exit(void)
+static inline void __exit mdio_ofgpio_exit(void)
 {
 	of_unregister_platform_driver(&mdio_ofgpio_driver);
 }
+#else
+static inline int __init mdio_ofgpio_init(void) { return 0; }
+static inline void __exit mdio_ofgpio_exit(void) { }
+#endif /* CONFIG_OF_GPIO */
+
+static struct platform_driver mdio_gpio_driver = {
+	.probe = mdio_gpio_probe,
+	.remove = __devexit_p(mdio_gpio_remove),
+	.driver		= {
+		.name	= "mdio-gpio",
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int __init mdio_gpio_init(void)
+{
+	int ret;
+
+	ret = mdio_ofgpio_init();
+	if (ret)
+		return ret;
+
+	ret = platform_driver_register(&mdio_gpio_driver);
+	if (ret)
+		mdio_ofgpio_exit();
+
+	return ret;
+}
+module_init(mdio_gpio_init);
+
+static void __exit mdio_gpio_exit(void)
+{
+	platform_driver_unregister(&mdio_gpio_driver);
+	mdio_ofgpio_exit();
+}
+module_exit(mdio_gpio_exit);
 
-module_init(mdio_ofgpio_init);
-module_exit(mdio_ofgpio_exit);
+MODULE_ALIAS("platform:mdio-gpio");
+MODULE_AUTHOR("Laurent Pinchart, Paulius Zaleckas");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Generic driver for MDIO bus emulation using GPIO");
diff --git a/include/linux/mdio-gpio.h b/include/linux/mdio-gpio.h
new file mode 100644
index 0000000..e9d3fdf
--- /dev/null
+++ b/include/linux/mdio-gpio.h
@@ -0,0 +1,25 @@
+/*
+ * MDIO-GPIO bus platform data structures
+ *
+ * Copyright (C) 2008, Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#ifndef __LINUX_MDIO_GPIO_H
+#define __LINUX_MDIO_GPIO_H
+
+#include <linux/mdio-bitbang.h>
+
+struct mdio_gpio_platform_data {
+	/* GPIO numbers for bus pins */
+	unsigned int mdc;
+	unsigned int mdio;
+
+	unsigned int phy_mask;
+	int irqs[PHY_MAX_ADDR];
+};
+
+#endif /* __LINUX_MDIO_GPIO_H */

Re: [PATCH] phylib: make mdio-gpio work without OF (v3)

[Laurent Pinchart]

Hi Paulius,

sorry for the late reply. I've been busy at work with a release and had no 
time to test the patch. Comments follow.

On Monday 10 November 2008, Paulius Zaleckas wrote:
> make mdio-gpio work with non OpenFirmware gpio implementation.
>
> Aditional changes to mdio-gpio:
> - use gpio_request() and gpio_free()
> - place irq[] array in struct mdio_gpio_info
> - add module description, author and license
> - add note about compiling this driver as module
> - rename mdc and mdio function (were ugly names)
> - change MII to MDIO in bus name
> - add __init __exit to module (un)loading functions
> - probe fails if no phys added to the bus
> - kzalloc bitbang with sizeof(*bitbang)
>
> Changes since v2:
> - more #ifdefs reduction
> - platform driver will be registered on OF platforms also
> - unified platform and OF bus_id to phy%i
>
> Changes since v1:
> - removed NO_IRQ
> - reduced #idefs
>
> Laurent, please test this driver under OF.

Unfortunately this breaks on OF platforms (at least on mine):

~ # ifconfig eth0 up
[  258.886051] eb:01 not found
[  258.887409] eth0: Could not attach to phy

See below for an analysis.

> Signed-off-by: Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
> Cc: Laurent Pinchart <laurent.pinchart@skynet.be>
> Cc: Grant Likely <grant.likely@secretlab.ca>
> Cc: Mike Frysinger <vapier.adi@gmail.com>
> ---
>
>  drivers/net/phy/Kconfig     |    5 +
>  drivers/net/phy/mdio-gpio.c |  232
> ++++++++++++++++++++++++++++++------------- include/linux/mdio-gpio.h   |  
> 25 +++++
>  3 files changed, 191 insertions(+), 71 deletions(-)
>  create mode 100644 include/linux/mdio-gpio.h
>
>
> diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
> index 0318077..c4c5a2f 100644
> --- a/drivers/net/phy/Kconfig
> +++ b/drivers/net/phy/Kconfig
> @@ -86,8 +86,11 @@ config MDIO_BITBANG
>
>  config MDIO_GPIO
>  	tristate "Support for GPIO lib-based bitbanged MDIO buses"
> -	depends on MDIO_BITBANG && OF_GPIO
> +	depends on MDIO_BITBANG && GENERIC_GPIO
>  	---help---
>  	  Supports GPIO lib-based MDIO busses.
>
> +	  To compile this driver as a module, choose M here: the module
> +	  will be called mdio-gpio.
> +
>  endif # PHYLIB
> diff --git a/drivers/net/phy/mdio-gpio.c b/drivers/net/phy/mdio-gpio.c
> index 2ff9775..1a889fa 100644
> --- a/drivers/net/phy/mdio-gpio.c
> +++ b/drivers/net/phy/mdio-gpio.c
> @@ -1,9 +1,12 @@
>  /*
> - * OpenFirmware GPIO based MDIO bitbang driver.
> + * GPIO based MDIO bitbang driver.
> + * Supports OpenFirmware.
>   *
>   * Copyright (c) 2008 CSE Semaphore Belgium.
>   *  by Laurent Pinchart <laurentp@cse-semaphore.com>
>   *
> + * Copyright (C) 2008, Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
> + *
>   * Based on earlier work by
>   *
>   * Copyright (c) 2003 Intracom S.A.
> @@ -21,9 +24,14 @@
>  #include <linux/slab.h>
>  #include <linux/init.h>
>  #include <linux/interrupt.h>
> -#include <linux/mdio-bitbang.h>
> +#include <linux/platform_device.h>
> +#include <linux/gpio.h>
> +#include <linux/mdio-gpio.h>
> +
> +#ifdef CONFIG_OF_GPIO
>  #include <linux/of_gpio.h>
>  #include <linux/of_platform.h>
> +#endif
>
>  struct mdio_gpio_info {
>  	struct mdiobb_ctrl ctrl;
> @@ -41,7 +49,7 @@ static void mdio_dir(struct mdiobb_ctrl *ctrl, int dir)
>  		gpio_direction_input(bitbang->mdio);
>  }
>
> -static int mdio_read(struct mdiobb_ctrl *ctrl)
> +static int mdio_get(struct mdiobb_ctrl *ctrl)
>  {
>  	struct mdio_gpio_info *bitbang =
>  		container_of(ctrl, struct mdio_gpio_info, ctrl);
> @@ -49,7 +57,7 @@ static int mdio_read(struct mdiobb_ctrl *ctrl)
>  	return gpio_get_value(bitbang->mdio);
>  }
>
> -static void mdio(struct mdiobb_ctrl *ctrl, int what)
> +static void mdio_set(struct mdiobb_ctrl *ctrl, int what)
>  {
>  	struct mdio_gpio_info *bitbang =
>  		container_of(ctrl, struct mdio_gpio_info, ctrl);
> @@ -57,7 +65,7 @@ static void mdio(struct mdiobb_ctrl *ctrl, int what)
>  	gpio_set_value(bitbang->mdio, what);
>  }
>
> -static void mdc(struct mdiobb_ctrl *ctrl, int what)
> +static void mdc_set(struct mdiobb_ctrl *ctrl, int what)
>  {
>  	struct mdio_gpio_info *bitbang =
>  		container_of(ctrl, struct mdio_gpio_info, ctrl);
> @@ -67,93 +75,69 @@ static void mdc(struct mdiobb_ctrl *ctrl, int what)
>
>  static struct mdiobb_ops mdio_gpio_ops = {
>  	.owner = THIS_MODULE,
> -	.set_mdc = mdc,
> +	.set_mdc = mdc_set,
>  	.set_mdio_dir = mdio_dir,
> -	.set_mdio_data = mdio,
> -	.get_mdio_data = mdio_read,
> +	.set_mdio_data = mdio_set,
> +	.get_mdio_data = mdio_get,
>  };
>
> -static int __devinit mdio_ofgpio_bitbang_init(struct mii_bus *bus,
> -                                         struct device_node *np)
> -{
> -	struct mdio_gpio_info *bitbang = bus->priv;
> -
> -	bitbang->mdc = of_get_gpio(np, 0);
> -	bitbang->mdio = of_get_gpio(np, 1);
> -
> -	if (bitbang->mdc < 0 || bitbang->mdio < 0)
> -		return -ENODEV;
> -
> -	snprintf(bus->id, MII_BUS_ID_SIZE, "%x", bitbang->mdc);

The bus id was "%x"...

> -	return 0;
> -}
> -
> -static void __devinit add_phy(struct mii_bus *bus, struct device_node *np)
> +static int __devinit mdio_gpio_bus_init(struct device *dev,
> +					struct mdio_gpio_platform_data *pdata,
> +					int bus_id)
>  {
> -	const u32 *data;
> -	int len, id, irq;
> -
> -	data = of_get_property(np, "reg", &len);
> -	if (!data || len != 4)
> -		return;
> -
> -	id = *data;
> -	bus->phy_mask &= ~(1 << id);
> -
> -	irq = of_irq_to_resource(np, 0, NULL);
> -	if (irq != NO_IRQ)
> -		bus->irq[id] = irq;
> -}
> -
> -static int __devinit mdio_ofgpio_probe(struct of_device *ofdev,
> -                                        const struct of_device_id *match)
> -{
> -	struct device_node *np = NULL;
>  	struct mii_bus *new_bus;
>  	struct mdio_gpio_info *bitbang;
>  	int ret = -ENOMEM;
>  	int i;
>
> -	bitbang = kzalloc(sizeof(struct mdio_gpio_info), GFP_KERNEL);
> +	bitbang = kzalloc(sizeof(*bitbang), GFP_KERNEL);
>  	if (!bitbang)
>  		goto out;
>
>  	bitbang->ctrl.ops = &mdio_gpio_ops;
> +	bitbang->mdc = pdata->mdc;
> +	bitbang->mdio = pdata->mdio;
>
>  	new_bus = alloc_mdio_bitbang(&bitbang->ctrl);
>  	if (!new_bus)
>  		goto out_free_bitbang;
>
> -	new_bus->name = "GPIO Bitbanged MII",
> +	new_bus->name = "GPIO Bitbanged MDIO",
>
> -	ret = mdio_ofgpio_bitbang_init(new_bus, ofdev->node);
> -	if (ret)
> -		goto out_free_bus;
> +	ret = -ENODEV;
>
> -	new_bus->phy_mask = ~0;
> -	new_bus->irq = kmalloc(sizeof(int) * PHY_MAX_ADDR, GFP_KERNEL);
> -	if (!new_bus->irq)
> +	new_bus->phy_mask = pdata->phy_mask;
> +	new_bus->irq = pdata->irqs;
> +	new_bus->parent = dev;
> +
> +	if (new_bus->phy_mask == ~0)
>  		goto out_free_bus;
>
>  	for (i = 0; i < PHY_MAX_ADDR; i++)
> -		new_bus->irq[i] = -1;
> +		if (!new_bus->irq[i])
> +			new_bus->irq[i] = PHY_POLL;
>
> -	while ((np = of_get_next_child(ofdev->node, np)))
> -		if (!strcmp(np->type, "ethernet-phy"))
> -			add_phy(new_bus, np);
> +	snprintf(new_bus->id, MII_BUS_ID_SIZE, "phy%i", bus_id);

And you renamed it to phy%i. Ethernet drivers relying on the id should be 
updated as well.

Updating drivers/net/fs_enet/fs_enet-main.c (in find_phy) fixed the problem 
for my platform. Please not that this requires a change to 
drivers/net/fs_enet/mii-bitbang.c (in fs_mii_bitbang_init) as well.

> +
> +	if (gpio_request(bitbang->mdc, "mdc"))
> +		goto out_free_bus;
>
> -	new_bus->parent = &ofdev->dev;
> -	dev_set_drvdata(&ofdev->dev, new_bus);
> +	if (gpio_request(bitbang->mdio, "mdio"))
> +		goto out_free_mdc;
> +
> +	dev_set_drvdata(dev, new_bus);
>
>  	ret = mdiobus_register(new_bus);
>  	if (ret)
> -		goto out_free_irqs;
> +		goto out_free_all;
>
>  	return 0;
>
> -out_free_irqs:
> -	dev_set_drvdata(&ofdev->dev, NULL);
> -	kfree(new_bus->irq);
> +out_free_all:
> +	dev_set_drvdata(dev, NULL);
> +	gpio_free(bitbang->mdio);
> +out_free_mdc:
> +	gpio_free(bitbang->mdc);
>  out_free_bus:
>  	free_mdio_bitbang(new_bus);
>  out_free_bitbang:
> @@ -162,16 +146,86 @@ out:
>  	return ret;
>  }
>
> -static int mdio_ofgpio_remove(struct of_device *ofdev)
> +static void __devexit mdio_gpio_bus_destroy(struct device *dev)
>  {
> -	struct mii_bus *bus = dev_get_drvdata(&ofdev->dev);
> +	struct mii_bus *bus = dev_get_drvdata(dev);
>  	struct mdio_gpio_info *bitbang = bus->priv;
>
>  	mdiobus_unregister(bus);
> -	kfree(bus->irq);
>  	free_mdio_bitbang(bus);
> -	dev_set_drvdata(&ofdev->dev, NULL);
> +	dev_set_drvdata(dev, NULL);
> +	gpio_free(bitbang->mdc);
> +	gpio_free(bitbang->mdio);
>  	kfree(bitbang);
> +}
> +
> +static int __devinit mdio_gpio_probe(struct platform_device *pdev)
> +{
> +	struct mdio_gpio_platform_data *pdata = pdev->dev.platform_data;
> +
> +	if (!pdata)
> +		return -ENODEV;
> +
> +	return mdio_gpio_bus_init(&pdev->dev, pdata, pdev->id);
> +}
> +
> +static int __devexit mdio_gpio_remove(struct platform_device *pdev)
> +{
> +	mdio_gpio_bus_destroy(&pdev->dev);
> +
> +	return 0;
> +}
> +
> +#ifdef CONFIG_OF_GPIO
> +static void __devinit add_phy(struct mdio_gpio_platform_data *pdata,
> +			      struct device_node *np)
> +{
> +	const u32 *data;
> +	int len, id, irq;
> +
> +	data = of_get_property(np, "reg", &len);
> +	if (!data || len != 4)
> +		return;
> +
> +	id = *data;
> +	pdata->phy_mask &= ~(1 << id);
> +
> +	irq = of_irq_to_resource(np, 0, NULL);
> +	if (irq)
> +		pdata->irqs[id] = irq;
> +}
> +
> +static int __devinit mdio_ofgpio_probe(struct of_device *ofdev,
> +                                        const struct of_device_id *match)
> +{
> +	struct device_node *np = NULL;
> +	struct mdio_gpio_platform_data *pdata;
> +
> +	pdata = kzalloc(sizeof(*pdata), GFP_KERNEL);
> +	if (!pdata)
> +		return -ENOMEM;
> +
> +	pdata->mdc = of_get_gpio(ofdev->node, 0);
> +	pdata->mdio = of_get_gpio(ofdev->node, 1);
> +
> +	if (pdata->mdc < 0 || pdata->mdio < 0)
> +		goto out_free;
> +
> +	while ((np = of_get_next_child(ofdev->node, np)))
> +		if (!strcmp(np->type, "ethernet-phy"))
> +			add_phy(pdata, np);
> +
> +	return mdio_gpio_bus_init(&ofdev->dev, pdata, pdata->mdc);
> +
> +out_free:
> +	kfree(pdata);
> +	return -ENODEV;
> +}
> +
> +static int __devexit mdio_ofgpio_remove(struct of_device *ofdev)
> +{
> +	mdio_gpio_bus_destroy(&ofdev->dev);
> +	kfree(ofdev->dev.platform_data);
>
>  	return 0;
>  }
> @@ -187,18 +241,56 @@ static struct of_platform_driver mdio_ofgpio_driver =
> { .name = "mdio-gpio",
>  	.match_table = mdio_ofgpio_match,
>  	.probe = mdio_ofgpio_probe,
> -	.remove = mdio_ofgpio_remove,
> +	.remove = __devexit_p(mdio_ofgpio_remove),
>  };
>
> -static int mdio_ofgpio_init(void)
> +static inline int __init mdio_ofgpio_init(void)
>  {
>  	return of_register_platform_driver(&mdio_ofgpio_driver);
>  }
>
> -static void mdio_ofgpio_exit(void)
> +static inline void __exit mdio_ofgpio_exit(void)
>  {
>  	of_unregister_platform_driver(&mdio_ofgpio_driver);
>  }
> +#else
> +static inline int __init mdio_ofgpio_init(void) { return 0; }
> +static inline void __exit mdio_ofgpio_exit(void) { }
> +#endif /* CONFIG_OF_GPIO */
> +
> +static struct platform_driver mdio_gpio_driver = {
> +	.probe = mdio_gpio_probe,
> +	.remove = __devexit_p(mdio_gpio_remove),
> +	.driver		= {
> +		.name	= "mdio-gpio",
> +		.owner	= THIS_MODULE,
> +	},
> +};
> +
> +static int __init mdio_gpio_init(void)
> +{
> +	int ret;
> +
> +	ret = mdio_ofgpio_init();
> +	if (ret)
> +		return ret;
> +
> +	ret = platform_driver_register(&mdio_gpio_driver);
> +	if (ret)
> +		mdio_ofgpio_exit();
> +
> +	return ret;
> +}
> +module_init(mdio_gpio_init);
> +
> +static void __exit mdio_gpio_exit(void)
> +{
> +	platform_driver_unregister(&mdio_gpio_driver);
> +	mdio_ofgpio_exit();
> +}
> +module_exit(mdio_gpio_exit);
>
> -module_init(mdio_ofgpio_init);
> -module_exit(mdio_ofgpio_exit);
> +MODULE_ALIAS("platform:mdio-gpio");
> +MODULE_AUTHOR("Laurent Pinchart, Paulius Zaleckas");
> +MODULE_LICENSE("GPL");
> +MODULE_DESCRIPTION("Generic driver for MDIO bus emulation using GPIO");
> diff --git a/include/linux/mdio-gpio.h b/include/linux/mdio-gpio.h
> new file mode 100644
> index 0000000..e9d3fdf
> --- /dev/null
> +++ b/include/linux/mdio-gpio.h
> @@ -0,0 +1,25 @@
> +/*
> + * MDIO-GPIO bus platform data structures
> + *
> + * Copyright (C) 2008, Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
> + *
> + * This file is licensed under the terms of the GNU General Public License
> + * version 2. This program is licensed "as is" without any warranty of any
> + * kind, whether express or implied.
> + */
> +
> +#ifndef __LINUX_MDIO_GPIO_H
> +#define __LINUX_MDIO_GPIO_H
> +
> +#include <linux/mdio-bitbang.h>
> +
> +struct mdio_gpio_platform_data {
> +	/* GPIO numbers for bus pins */
> +	unsigned int mdc;
> +	unsigned int mdio;
> +
> +	unsigned int phy_mask;
> +	int irqs[PHY_MAX_ADDR];
> +};
> +
> +#endif /* __LINUX_MDIO_GPIO_H */

Best regards,

Laurent Pinchart

Re: [PATCH] phylib: make mdio-gpio work without OF (v3)

[Paulius Zaleckas]

Laurent Pinchart wrote:
> Hi Paulius,
> 
> sorry for the late reply. I've been busy at work with a release and had no 
> time to test the patch. Comments follow.
> 
> On Monday 10 November 2008, Paulius Zaleckas wrote:
>> make mdio-gpio work with non OpenFirmware gpio implementation.
>>
>> Aditional changes to mdio-gpio:
>> - use gpio_request() and gpio_free()
>> - place irq[] array in struct mdio_gpio_info
>> - add module description, author and license
>> - add note about compiling this driver as module
>> - rename mdc and mdio function (were ugly names)
>> - change MII to MDIO in bus name
>> - add __init __exit to module (un)loading functions
>> - probe fails if no phys added to the bus
>> - kzalloc bitbang with sizeof(*bitbang)
>>
>> Changes since v2:
>> - more #ifdefs reduction
>> - platform driver will be registered on OF platforms also
>> - unified platform and OF bus_id to phy%i
>>
>> Changes since v1:
>> - removed NO_IRQ
>> - reduced #idefs
>>
>> Laurent, please test this driver under OF.
> 
> Unfortunately this breaks on OF platforms (at least on mine):
> 
> ~ # ifconfig eth0 up
> [  258.886051] eb:01 not found
> [  258.887409] eth0: Could not attach to phy
> 
> The bus id was "%x"...
>
> And you renamed it to phy%i. Ethernet drivers relying on the id should be 
> updated as well.

I done this to be closer to what phylib documentation says...
I did search over drivers and found out that almost all of them uses "%x"...

> Updating drivers/net/fs_enet/fs_enet-main.c (in find_phy) fixed the problem 
> for my platform. Please not that this requires a change to 
> drivers/net/fs_enet/mii-bitbang.c (in fs_mii_bitbang_init) as well.

A lot more than that...
So actually it is better to just change it back to "%x".

Waiting for comments from other people and I will respin patch with this change.