[PATCH v4 0/2] ext4, jbd2: journal cycled record transactions between each mount

[PATCH v4 0/2] ext4, jbd2: journal cycled record transactions between each mount

[Zhang Yi]

From: Zhang Yi <yi.zhang@huawei.com>

v3->v4:
 - Remove journal_cycle_record mount option, always enable it on ext4.
v2->v3:
 - Prevent warning if mount old image with journal_cycle_record enabled.
 - Limit this mount option into ext4 iamge only.
v1->v2:
 - Fix the format type warning.
 - Add more check of journal_cycle_record mount options in remount.

Hello!

This patch set is the fourth edition of the journal_cycle_record mount
option. It save journal head for a clean unmounted file system in the
journal super block, which could let us record journal transactions
between each mount continuously. It could help us to do journal
backtrack and find root cause from a corrupted filesystem. Current
filesystem's corruption analysis is difficult and less useful
information, especially on the real products. It is useful to some
extent, especially for the cases of doing fuzzy tests and deploy in
some shout-runing products.

I will send out the corresponding e2fsprogs part v2 separately, all of
these have done below test cases and also passed xfstests in auto mode.
 - Mount a filesystem with empty journal.
 - Mount a filesystem with journal ended in an unrecovered complete
   transaction.
 - Mount a filesystem with journal ended in an incomplete transaction.
 - Mount a corrupted filesystem with out of bound journal s_head.
 - Mount old filesystem without journal s_head set.

Any comments are welcome.

Thanks!
Yi.

v3: https://lore.kernel.org/linux-ext4/20230314140522.3266591-1-yi.zhang@huaweicloud.com/
v2: https://lore.kernel.org/linux-ext4/20230202142224.3679549-1-yi.zhang@huawei.com/
v1: https://lore.kernel.org/linux-ext4/20230119034600.3431194-3-yi.zhang@huaweicloud.com/

Zhang Yi (2):
  jbd2: continue to record log between each mount
  ext4: add journal cycled recording support

 fs/ext4/super.c      |  5 +++++
 fs/jbd2/journal.c    | 18 ++++++++++++++++--
 fs/jbd2/recovery.c   | 22 +++++++++++++++++-----
 include/linux/jbd2.h |  9 +++++++--
 4 files changed, 45 insertions(+), 9 deletions(-)

-- 
2.31.1

[PATCH v4 1/2] jbd2: continue to record log between each mount

[Zhang Yi]

From: Zhang Yi <yi.zhang@huawei.com>

For a newly mounted file system, the journal committing thread always
record new transactions from the start of the journal area, no matter
whether the journal was clean or just has been recovered. So the logdump
code in debugfs cannot dump continuous logs between each mount, it is
disadvantageous to analysis corrupted file system image and locate the
file system inconsistency bugs.

If we get a corrupted file system in the running products and want to
find out what has happened, besides lookup the system log, one effective
way is to backtrack the journal log. But we may not always run e2fsck
before each mount and the default fsck -a mode also cannot always
checkout all inconsistencies, so it could left over some inconsistencies
into the next mount until we detect it. Finally, transactions in the
journal may probably discontinuous and some relatively new transactions
has been covered, it becomes hard to analyse. If we could record
transactions continuously between each mount, we could acquire more
useful info from the journal. Like this:

 |Previous mount checkpointed/recovered logs|Current mount logs         |
 |{------}{---}{--------} ... {------}| ... |{======}{========}...000000|

And yes the journal area is limited and cannot record everything, the
problematic transaction may also be covered even if we do this, but
this is still useful for fuzzy tests and short-running products.

This patch save the head blocknr in the superblock after flushing the
journal or unmounting the file system, let the next mount could continue
to record new transaction behind it. This change is backward compatible
because the old kernel does not care about the head blocknr of the
journal. It is also fine if we mount a clean old image without valid
head blocknr, we fail back to set it to s_first just like before.
Finally, for the case of mount an unclean file system, we could also get
the journal head easily after scanning/replaying the journal, it will
continue to record new transaction after the recovered transactions.

Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
---
 fs/jbd2/journal.c    | 18 ++++++++++++++++--
 fs/jbd2/recovery.c   | 22 +++++++++++++++++-----
 include/linux/jbd2.h |  9 +++++++--
 3 files changed, 40 insertions(+), 9 deletions(-)

diff --git a/fs/jbd2/journal.c b/fs/jbd2/journal.c
index e80c781731f8..c57ab466fc18 100644
--- a/fs/jbd2/journal.c
+++ b/fs/jbd2/journal.c
@@ -1556,8 +1556,21 @@ static int journal_reset(journal_t *journal)
 	journal->j_first = first;
 	journal->j_last = last;
 
-	journal->j_head = journal->j_first;
-	journal->j_tail = journal->j_first;
+	if (journal->j_head != 0 && journal->j_flags & JBD2_CYCLE_RECORD) {
+		/*
+		 * Disable the cycled recording mode if the journal head block
+		 * number is not correct.
+		 */
+		if (journal->j_head < first || journal->j_head >= last) {
+			printk(KERN_WARNING "JBD2: Incorrect Journal head block %lu, "
+			       "disable journal_cycle_record\n",
+			       journal->j_head);
+			journal->j_head = journal->j_first;
+		}
+	} else {
+		journal->j_head = journal->j_first;
+	}
+	journal->j_tail = journal->j_head;
 	journal->j_free = journal->j_last - journal->j_first;
 
 	journal->j_tail_sequence = journal->j_transaction_sequence;
@@ -1729,6 +1742,7 @@ static void jbd2_mark_journal_empty(journal_t *journal, blk_opf_t write_flags)
 
 	sb->s_sequence = cpu_to_be32(journal->j_tail_sequence);
 	sb->s_start    = cpu_to_be32(0);
+	sb->s_head     = cpu_to_be32(journal->j_head);
 	if (jbd2_has_feature_fast_commit(journal)) {
 		/*
 		 * When journal is clean, no need to commit fast commit flag and
diff --git a/fs/jbd2/recovery.c b/fs/jbd2/recovery.c
index 8286a9ec122f..0184931d47f7 100644
--- a/fs/jbd2/recovery.c
+++ b/fs/jbd2/recovery.c
@@ -29,6 +29,7 @@ struct recovery_info
 {
 	tid_t		start_transaction;
 	tid_t		end_transaction;
+	unsigned long	head_block;
 
 	int		nr_replays;
 	int		nr_revokes;
@@ -301,11 +302,11 @@ int jbd2_journal_recover(journal_t *journal)
 	 * is always zero if, and only if, the journal was cleanly
 	 * unmounted.
 	 */
-
 	if (!sb->s_start) {
-		jbd2_debug(1, "No recovery required, last transaction %d\n",
-			  be32_to_cpu(sb->s_sequence));
+		jbd2_debug(1, "No recovery required, last transaction %d, head block %u\n",
+			  be32_to_cpu(sb->s_sequence), be32_to_cpu(sb->s_head));
 		journal->j_transaction_sequence = be32_to_cpu(sb->s_sequence) + 1;
+		journal->j_head = be32_to_cpu(sb->s_head);
 		return 0;
 	}
 
@@ -324,6 +325,9 @@ int jbd2_journal_recover(journal_t *journal)
 	/* Restart the log at the next transaction ID, thus invalidating
 	 * any existing commit records in the log. */
 	journal->j_transaction_sequence = ++info.end_transaction;
+	journal->j_head = info.head_block;
+	jbd2_debug(1, "JBD2: last transaction %d, head block %lu\n",
+		  journal->j_transaction_sequence, journal->j_head);
 
 	jbd2_journal_clear_revoke(journal);
 	err2 = sync_blockdev(journal->j_fs_dev);
@@ -364,6 +368,7 @@ int jbd2_journal_skip_recovery(journal_t *journal)
 	if (err) {
 		printk(KERN_ERR "JBD2: error %d scanning journal\n", err);
 		++journal->j_transaction_sequence;
+		journal->j_head = journal->j_first;
 	} else {
 #ifdef CONFIG_JBD2_DEBUG
 		int dropped = info.end_transaction - 
@@ -373,6 +378,7 @@ int jbd2_journal_skip_recovery(journal_t *journal)
 			  dropped, (dropped == 1) ? "" : "s");
 #endif
 		journal->j_transaction_sequence = ++info.end_transaction;
+		journal->j_head = info.head_block;
 	}
 
 	journal->j_tail = 0;
@@ -462,7 +468,7 @@ static int do_one_pass(journal_t *journal,
 			struct recovery_info *info, enum passtype pass)
 {
 	unsigned int		first_commit_ID, next_commit_ID;
-	unsigned long		next_log_block;
+	unsigned long		next_log_block, head_block;
 	int			err, success = 0;
 	journal_superblock_t *	sb;
 	journal_header_t *	tmp;
@@ -485,6 +491,7 @@ static int do_one_pass(journal_t *journal,
 	sb = journal->j_superblock;
 	next_commit_ID = be32_to_cpu(sb->s_sequence);
 	next_log_block = be32_to_cpu(sb->s_start);
+	head_block = next_log_block;
 
 	first_commit_ID = next_commit_ID;
 	if (pass == PASS_SCAN)
@@ -809,6 +816,7 @@ static int do_one_pass(journal_t *journal,
 				if (commit_time < last_trans_commit_time)
 					goto ignore_crc_mismatch;
 				info->end_transaction = next_commit_ID;
+				info->head_block = head_block;
 
 				if (!jbd2_has_feature_async_commit(journal)) {
 					journal->j_failed_commit =
@@ -817,8 +825,10 @@ static int do_one_pass(journal_t *journal,
 					break;
 				}
 			}
-			if (pass == PASS_SCAN)
+			if (pass == PASS_SCAN) {
 				last_trans_commit_time = commit_time;
+				head_block = next_log_block;
+			}
 			brelse(bh);
 			next_commit_ID++;
 			continue;
@@ -868,6 +878,8 @@ static int do_one_pass(journal_t *journal,
 	if (pass == PASS_SCAN) {
 		if (!info->end_transaction)
 			info->end_transaction = next_commit_ID;
+		if (!info->head_block)
+			info->head_block = head_block;
 	} else {
 		/* It's really bad news if different passes end up at
 		 * different places (but possible due to IO errors). */
diff --git a/include/linux/jbd2.h b/include/linux/jbd2.h
index 5962072a4b19..475f135260c9 100644
--- a/include/linux/jbd2.h
+++ b/include/linux/jbd2.h
@@ -265,8 +265,10 @@ typedef struct journal_superblock_s
 	__u8	s_padding2[3];
 /* 0x0054 */
 	__be32	s_num_fc_blks;		/* Number of fast commit blocks */
-/* 0x0058 */
-	__u32	s_padding[41];
+	__be32	s_head;			/* blocknr of head of log, only uptodate
+					 * while the filesystem is clean */
+/* 0x005C */
+	__u32	s_padding[40];
 	__be32	s_checksum;		/* crc32c(superblock) */
 
 /* 0x0100 */
@@ -1392,6 +1394,9 @@ JBD2_FEATURE_INCOMPAT_FUNCS(fast_commit,	FAST_COMMIT)
 #define JBD2_ABORT_ON_SYNCDATA_ERR	0x040	/* Abort the journal on file
 						 * data write error in ordered
 						 * mode */
+#define JBD2_CYCLE_RECORD		0x080	/* Journal cycled record log on
+						 * clean and empty filesystem
+						 * logging area */
 #define JBD2_FAST_COMMIT_ONGOING	0x100	/* Fast commit is ongoing */
 #define JBD2_FULL_COMMIT_ONGOING	0x200	/* Full commit is ongoing */
 #define JBD2_JOURNAL_FLUSH_DISCARD	0x0001
-- 
2.31.1

Re: [PATCH v4 1/2] jbd2: continue to record log between each mount

[wangjianjian (C)]

Do we need update document/filesystems/ext4/journal.rst ?

On 2023/3/17 17:09, Zhang Yi wrote:
> -	__u32	s_padding[41];
> +	__be32	s_head;			/* blocknr of head of log, only uptodate
> +					 * while the filesystem is clean */
> +/* 0x005C */
> +	__u32	s_padding[40];
>   	__be32	s_checksum;		/* crc32c(superblock) */
>   

Re: [PATCH v4 1/2] jbd2: continue to record log between each mount

[Theodore Ts'o]

On Fri, Mar 17, 2023 at 06:33:50PM +0800, wangjianjian (C) wrote:
> Do we need update document/filesystems/ext4/journal.rst ?
> 
> On 2023/3/17 17:09, Zhang Yi wrote:
> > -	__u32	s_padding[41];
> > +	__be32	s_head;			/* blocknr of head of log, only uptodate
> > +					 * while the filesystem is clean */
> > +/* 0x005C */
> > +	__u32	s_padding[40];
> >   	__be32	s_checksum;		/* crc32c(superblock) */

Yes, please update journal.rst in the patch.

						- Ted

Re: [PATCH v4 1/2] jbd2: continue to record log between each mount

[Zhang Yi]

On 2023/3/17 23:25, Theodore Ts'o wrote:
> On Fri, Mar 17, 2023 at 06:33:50PM +0800, wangjianjian (C) wrote:
>> Do we need update document/filesystems/ext4/journal.rst ?
>>
>> On 2023/3/17 17:09, Zhang Yi wrote:
>>> -	__u32	s_padding[41];
>>> +	__be32	s_head;			/* blocknr of head of log, only uptodate
>>> +					 * while the filesystem is clean */
>>> +/* 0x005C */
>>> +	__u32	s_padding[40];
>>>   	__be32	s_checksum;		/* crc32c(superblock) */
> 
> Yes, please update journal.rst in the patch.
> 
Yes, thanks for pointing this out. I will update it in journal.rst

Thanks,
Yi.

Re: [PATCH v4 1/2] jbd2: continue to record log between each mount

[Jan Kara]

On Fri 17-03-23 17:09:25, Zhang Yi wrote:
> From: Zhang Yi <yi.zhang@huawei.com>
> 
> For a newly mounted file system, the journal committing thread always
> record new transactions from the start of the journal area, no matter
> whether the journal was clean or just has been recovered. So the logdump
> code in debugfs cannot dump continuous logs between each mount, it is
> disadvantageous to analysis corrupted file system image and locate the
> file system inconsistency bugs.
> 
> If we get a corrupted file system in the running products and want to
> find out what has happened, besides lookup the system log, one effective
> way is to backtrack the journal log. But we may not always run e2fsck
> before each mount and the default fsck -a mode also cannot always
> checkout all inconsistencies, so it could left over some inconsistencies
> into the next mount until we detect it. Finally, transactions in the
> journal may probably discontinuous and some relatively new transactions
> has been covered, it becomes hard to analyse. If we could record
> transactions continuously between each mount, we could acquire more
> useful info from the journal. Like this:
> 
>  |Previous mount checkpointed/recovered logs|Current mount logs         |
>  |{------}{---}{--------} ... {------}| ... |{======}{========}...000000|
> 
> And yes the journal area is limited and cannot record everything, the
> problematic transaction may also be covered even if we do this, but
> this is still useful for fuzzy tests and short-running products.
> 
> This patch save the head blocknr in the superblock after flushing the
> journal or unmounting the file system, let the next mount could continue
> to record new transaction behind it. This change is backward compatible
> because the old kernel does not care about the head blocknr of the
> journal. It is also fine if we mount a clean old image without valid
> head blocknr, we fail back to set it to s_first just like before.
> Finally, for the case of mount an unclean file system, we could also get
> the journal head easily after scanning/replaying the journal, it will
> continue to record new transaction after the recovered transactions.
> 
> Signed-off-by: Zhang Yi <yi.zhang@huawei.com>

Looks good to me. Feel free to add:

Reviewed-by: Jan Kara <jack@suse.cz>

								Honza

> ---
>  fs/jbd2/journal.c    | 18 ++++++++++++++++--
>  fs/jbd2/recovery.c   | 22 +++++++++++++++++-----
>  include/linux/jbd2.h |  9 +++++++--
>  3 files changed, 40 insertions(+), 9 deletions(-)
> 
> diff --git a/fs/jbd2/journal.c b/fs/jbd2/journal.c
> index e80c781731f8..c57ab466fc18 100644
> --- a/fs/jbd2/journal.c
> +++ b/fs/jbd2/journal.c
> @@ -1556,8 +1556,21 @@ static int journal_reset(journal_t *journal)
>  	journal->j_first = first;
>  	journal->j_last = last;
>  
> -	journal->j_head = journal->j_first;
> -	journal->j_tail = journal->j_first;
> +	if (journal->j_head != 0 && journal->j_flags & JBD2_CYCLE_RECORD) {
> +		/*
> +		 * Disable the cycled recording mode if the journal head block
> +		 * number is not correct.
> +		 */
> +		if (journal->j_head < first || journal->j_head >= last) {
> +			printk(KERN_WARNING "JBD2: Incorrect Journal head block %lu, "
> +			       "disable journal_cycle_record\n",
> +			       journal->j_head);
> +			journal->j_head = journal->j_first;
> +		}
> +	} else {
> +		journal->j_head = journal->j_first;
> +	}
> +	journal->j_tail = journal->j_head;
>  	journal->j_free = journal->j_last - journal->j_first;
>  
>  	journal->j_tail_sequence = journal->j_transaction_sequence;
> @@ -1729,6 +1742,7 @@ static void jbd2_mark_journal_empty(journal_t *journal, blk_opf_t write_flags)
>  
>  	sb->s_sequence = cpu_to_be32(journal->j_tail_sequence);
>  	sb->s_start    = cpu_to_be32(0);
> +	sb->s_head     = cpu_to_be32(journal->j_head);
>  	if (jbd2_has_feature_fast_commit(journal)) {
>  		/*
>  		 * When journal is clean, no need to commit fast commit flag and
> diff --git a/fs/jbd2/recovery.c b/fs/jbd2/recovery.c
> index 8286a9ec122f..0184931d47f7 100644
> --- a/fs/jbd2/recovery.c
> +++ b/fs/jbd2/recovery.c
> @@ -29,6 +29,7 @@ struct recovery_info
>  {
>  	tid_t		start_transaction;
>  	tid_t		end_transaction;
> +	unsigned long	head_block;
>  
>  	int		nr_replays;
>  	int		nr_revokes;
> @@ -301,11 +302,11 @@ int jbd2_journal_recover(journal_t *journal)
>  	 * is always zero if, and only if, the journal was cleanly
>  	 * unmounted.
>  	 */
> -
>  	if (!sb->s_start) {
> -		jbd2_debug(1, "No recovery required, last transaction %d\n",
> -			  be32_to_cpu(sb->s_sequence));
> +		jbd2_debug(1, "No recovery required, last transaction %d, head block %u\n",
> +			  be32_to_cpu(sb->s_sequence), be32_to_cpu(sb->s_head));
>  		journal->j_transaction_sequence = be32_to_cpu(sb->s_sequence) + 1;
> +		journal->j_head = be32_to_cpu(sb->s_head);
>  		return 0;
>  	}
>  
> @@ -324,6 +325,9 @@ int jbd2_journal_recover(journal_t *journal)
>  	/* Restart the log at the next transaction ID, thus invalidating
>  	 * any existing commit records in the log. */
>  	journal->j_transaction_sequence = ++info.end_transaction;
> +	journal->j_head = info.head_block;
> +	jbd2_debug(1, "JBD2: last transaction %d, head block %lu\n",
> +		  journal->j_transaction_sequence, journal->j_head);
>  
>  	jbd2_journal_clear_revoke(journal);
>  	err2 = sync_blockdev(journal->j_fs_dev);
> @@ -364,6 +368,7 @@ int jbd2_journal_skip_recovery(journal_t *journal)
>  	if (err) {
>  		printk(KERN_ERR "JBD2: error %d scanning journal\n", err);
>  		++journal->j_transaction_sequence;
> +		journal->j_head = journal->j_first;
>  	} else {
>  #ifdef CONFIG_JBD2_DEBUG
>  		int dropped = info.end_transaction - 
> @@ -373,6 +378,7 @@ int jbd2_journal_skip_recovery(journal_t *journal)
>  			  dropped, (dropped == 1) ? "" : "s");
>  #endif
>  		journal->j_transaction_sequence = ++info.end_transaction;
> +		journal->j_head = info.head_block;
>  	}
>  
>  	journal->j_tail = 0;
> @@ -462,7 +468,7 @@ static int do_one_pass(journal_t *journal,
>  			struct recovery_info *info, enum passtype pass)
>  {
>  	unsigned int		first_commit_ID, next_commit_ID;
> -	unsigned long		next_log_block;
> +	unsigned long		next_log_block, head_block;
>  	int			err, success = 0;
>  	journal_superblock_t *	sb;
>  	journal_header_t *	tmp;
> @@ -485,6 +491,7 @@ static int do_one_pass(journal_t *journal,
>  	sb = journal->j_superblock;
>  	next_commit_ID = be32_to_cpu(sb->s_sequence);
>  	next_log_block = be32_to_cpu(sb->s_start);
> +	head_block = next_log_block;
>  
>  	first_commit_ID = next_commit_ID;
>  	if (pass == PASS_SCAN)
> @@ -809,6 +816,7 @@ static int do_one_pass(journal_t *journal,
>  				if (commit_time < last_trans_commit_time)
>  					goto ignore_crc_mismatch;
>  				info->end_transaction = next_commit_ID;
> +				info->head_block = head_block;
>  
>  				if (!jbd2_has_feature_async_commit(journal)) {
>  					journal->j_failed_commit =
> @@ -817,8 +825,10 @@ static int do_one_pass(journal_t *journal,
>  					break;
>  				}
>  			}
> -			if (pass == PASS_SCAN)
> +			if (pass == PASS_SCAN) {
>  				last_trans_commit_time = commit_time;
> +				head_block = next_log_block;
> +			}
>  			brelse(bh);
>  			next_commit_ID++;
>  			continue;
> @@ -868,6 +878,8 @@ static int do_one_pass(journal_t *journal,
>  	if (pass == PASS_SCAN) {
>  		if (!info->end_transaction)
>  			info->end_transaction = next_commit_ID;
> +		if (!info->head_block)
> +			info->head_block = head_block;
>  	} else {
>  		/* It's really bad news if different passes end up at
>  		 * different places (but possible due to IO errors). */
> diff --git a/include/linux/jbd2.h b/include/linux/jbd2.h
> index 5962072a4b19..475f135260c9 100644
> --- a/include/linux/jbd2.h
> +++ b/include/linux/jbd2.h
> @@ -265,8 +265,10 @@ typedef struct journal_superblock_s
>  	__u8	s_padding2[3];
>  /* 0x0054 */
>  	__be32	s_num_fc_blks;		/* Number of fast commit blocks */
> -/* 0x0058 */
> -	__u32	s_padding[41];
> +	__be32	s_head;			/* blocknr of head of log, only uptodate
> +					 * while the filesystem is clean */
> +/* 0x005C */
> +	__u32	s_padding[40];
>  	__be32	s_checksum;		/* crc32c(superblock) */
>  
>  /* 0x0100 */
> @@ -1392,6 +1394,9 @@ JBD2_FEATURE_INCOMPAT_FUNCS(fast_commit,	FAST_COMMIT)
>  #define JBD2_ABORT_ON_SYNCDATA_ERR	0x040	/* Abort the journal on file
>  						 * data write error in ordered
>  						 * mode */
> +#define JBD2_CYCLE_RECORD		0x080	/* Journal cycled record log on
> +						 * clean and empty filesystem
> +						 * logging area */
>  #define JBD2_FAST_COMMIT_ONGOING	0x100	/* Fast commit is ongoing */
>  #define JBD2_FULL_COMMIT_ONGOING	0x200	/* Full commit is ongoing */
>  #define JBD2_JOURNAL_FLUSH_DISCARD	0x0001
> -- 
> 2.31.1
> 
-- 
Jan Kara <jack@suse.com>
SUSE Labs, CR

[PATCH v4 2/2] ext4: add journal cycled recording support

[Zhang Yi]

From: Zhang Yi <yi.zhang@huawei.com>

Always enable 'JBD2_CYCLE_RECORD' journal option on ext4, letting the
jbd2 continue to record new journal transactions from the recovered
journal head or the checkpointed transactions in the previous mount.

Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
---
 fs/ext4/super.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/fs/ext4/super.c b/fs/ext4/super.c
index 88f7b8a88c76..9b46adae241b 100644
--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -5691,6 +5691,11 @@ static void ext4_init_journal_params(struct super_block *sb, journal_t *journal)
 		journal->j_flags |= JBD2_ABORT_ON_SYNCDATA_ERR;
 	else
 		journal->j_flags &= ~JBD2_ABORT_ON_SYNCDATA_ERR;
+	/*
+	 * Always enable journal cycle record option, letting the journal
+	 * records log transactions continuously between each mount.
+	 */
+	journal->j_flags |= JBD2_CYCLE_RECORD;
 	write_unlock(&journal->j_state_lock);
 }
 
-- 
2.31.1

Re: [PATCH v4 2/2] ext4: add journal cycled recording support

[Jan Kara]

On Fri 17-03-23 17:09:26, Zhang Yi wrote:
> From: Zhang Yi <yi.zhang@huawei.com>
> 
> Always enable 'JBD2_CYCLE_RECORD' journal option on ext4, letting the
> jbd2 continue to record new journal transactions from the recovered
> journal head or the checkpointed transactions in the previous mount.
> 
> Signed-off-by: Zhang Yi <yi.zhang@huawei.com>

Looks good to me. Feel free to add:

Reviewed-by: Jan Kara <jack@suse.cz>

								Honza

> ---
>  fs/ext4/super.c | 5 +++++
>  1 file changed, 5 insertions(+)
> 
> diff --git a/fs/ext4/super.c b/fs/ext4/super.c
> index 88f7b8a88c76..9b46adae241b 100644
> --- a/fs/ext4/super.c
> +++ b/fs/ext4/super.c
> @@ -5691,6 +5691,11 @@ static void ext4_init_journal_params(struct super_block *sb, journal_t *journal)
>  		journal->j_flags |= JBD2_ABORT_ON_SYNCDATA_ERR;
>  	else
>  		journal->j_flags &= ~JBD2_ABORT_ON_SYNCDATA_ERR;
> +	/*
> +	 * Always enable journal cycle record option, letting the journal
> +	 * records log transactions continuously between each mount.
> +	 */
> +	journal->j_flags |= JBD2_CYCLE_RECORD;
>  	write_unlock(&journal->j_state_lock);
>  }
>  
> -- 
> 2.31.1
> 
-- 
Jan Kara <jack@suse.com>
SUSE Labs, CR