Linux EXT4 FS development
 help / color / mirror / Atom feed
From: sashiko-bot@kernel.org
To: "Zhang Yi" <yi.zhang@huaweicloud.com>
Cc: linux-ext4@vger.kernel.org, tytso@mit.edu
Subject: Re: [PATCH -next v5 15/32] ext4: implement buffered write path using iomap
Date: Fri, 14 Aug 2026 10:40:55 +0000	[thread overview]
Message-ID: <20260814104055.7F2C21F000E9@smtp.kernel.org> (raw)
In-Reply-To: <20260814093331.1703882-16-yi.zhang@huaweicloud.com>

Thank you for your contribution! Sashiko AI review found 2 potential issue(s) to consider:
- [Critical] Extending a file within an already-allocated block does not update the on-disk `i_disksize` or mark the inode dirty, causing appended data to be lost on a crash or unmount.
- [High] The iomap non-delalloc buffered write path permanently leaks unwritten extents past `i_size` when a short write or failure occurs.
--

--- Patch [15]: [PATCH -next v5 15/32] ext4: implement buffered write path using iomap ---
commit 7a553e37ec457f0a485aa7c6fc378e68d6d66bfb
Author: Zhang Yi <yi.zhang@huawei.com>

ext4: implement buffered write path using iomap

This commit introduces two new iomap_ops instances for ext4 buffered writes:
one for delayed allocation mode and another for non-delayed allocation mode.
It also updates the folio lock and transaction start ordering for the new
iomap buffered write path.

> diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
> index 9098d9a5fc05b..d831d1911a6ff 100644
> --- a/fs/ext4/inode.c
> +++ b/fs/ext4/inode.c

[ ... ]

> @@ -3994,6 +4009,113 @@ static int ext4_iomap_buffered_read_begin(struct inode *inode, loff_t offset,
>  	return 0;
>  }
>  
> +static int ext4_iomap_buffered_do_write_begin(struct inode *inode,
> +		loff_t offset, loff_t length, unsigned int flags,
> +		struct iomap *iomap, struct iomap *srcmap, bool delalloc)
> +{
> +	int ret, retries = 0;
> +	struct ext4_map_blocks map;
> +	int map_flags;
> +
> +	ret = ext4_emergency_state(inode->i_sb);
> +	if (unlikely(ret))
> +		return ret;
> +
> +	/* Inline data and non-extent are not supported. */
> +	if (WARN_ON_ONCE(ext4_has_inline_data(inode)))
> +		return -ERANGE;
> +	if (WARN_ON_ONCE(!ext4_test_inode_flag(inode, EXT4_INODE_EXTENTS)))
> +		return -EINVAL;
> +	if (WARN_ON_ONCE(!(flags & IOMAP_WRITE)))
> +		return -EINVAL;
> +
> +	map_flags = delalloc ? EXT4_GET_BLOCKS_DELALLOC_RESERVE :
> +			       EXT4_GET_BLOCKS_CREATE_UNWRIT_EXT;
> +retry:
> +	ret = ext4_iomap_map_blocks(inode, offset, length, &map, map_flags);

[Severity: High]
Does this code permanently leak unwritten extents past i_size if a short
write or write failure occurs?

If the user memory copy subsequently fails (e.g. fault_in_iov_iter_readable()
returns -EFAULT), it results in a short write.

In the non-delalloc path, ext4_iomap_buffered_write_ops lacks an iomap_end
callback to clean up the allocated on-disk blocks, which could exhaust
disk space or quota.

> +	if (ret == -ENOSPC && ext4_should_retry_alloc(inode->i_sb, &retries))
> +		goto retry;
> +	if (ret < 0)
> +		return ret;
> +
> +	ext4_set_iomap(inode, iomap, &map, offset, length, flags);
> +	return 0;
> +}

[ ... ]

> +static int ext4_iomap_buffered_da_write_end(struct inode *inode, loff_t offset,
> +					    loff_t length, ssize_t written,
> +					    unsigned int flags,
> +					    struct iomap *iomap)
> +{
> +	loff_t start_byte, end_byte;
> +
> +	/* If we didn't reserve the blocks, we're not allowed to punch them. */
> +	if (iomap->type != IOMAP_DELALLOC || !(iomap->flags & IOMAP_F_NEW))
> +		return 0;

[Severity: Critical]
Will this silently lose data for extending writes within already-allocated
blocks?

If a buffered write appends data to a file within an extent that was already
allocated, iomap_write_iter() will update the in-memory i_size and set
IOMAP_F_SIZE_CHANGED.

However, this early return skips checking IOMAP_F_SIZE_CHANGED.

Without updating EXT4_I(inode)->i_disksize and calling ext4_mark_inode_dirty()
to persist the size change, appended data can be lost on a crash.

> +
> +	/* Nothing to do if we've written the entire delalloc extent */
> +	start_byte = iomap_last_written_block(inode, offset, written);
> +	end_byte = round_up(offset + length, i_blocksize(inode));
> +	if (start_byte >= end_byte)
> +		return 0;
> +
> +	filemap_invalidate_lock(inode->i_mapping);
> +	iomap_write_delalloc_release(inode, start_byte, end_byte, flags,
> +				     iomap, ext4_iomap_punch_delalloc);
> +	filemap_invalidate_unlock(inode->i_mapping);
> +	return 0;
> +}
> +
> +/*
> + * Since we always allocate unwritten extents, there is no need for
> + * iomap_end to clean up allocated blocks on a short write.
> + */
> +static DEFINE_IOMAP_ITER_NEXT(ext4_iomap_buffered_write_next,
> +			      ext4_iomap_buffered_write_begin);
> +
> +const struct iomap_ops ext4_iomap_buffered_write_ops = {
> +	.iomap_next = ext4_iomap_buffered_write_next,
> +};

[Severity: High]
Is it safe to omit an iomap_end callback here?

Without an iomap_end callback for the non-delalloc path, two issues appear
to occur:

1) Allocated unwritten extents past i_size are leaked if a write fails,
exhausting disk space or quota.

2) Extending writes into an already-allocated extent set IOMAP_F_SIZE_CHANGED
in the core iomap code, but without an iomap_end callback to update i_disksize
and mark the inode dirty, this size update is never persisted to disk.

> +
> +static DEFINE_IOMAP_ITER_NEXT_END(ext4_iomap_buffered_da_write_next,
> +				  ext4_iomap_buffered_da_write_begin,
> +				  ext4_iomap_buffered_da_write_end);

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20260814093331.1703882-1-yi.zhang@huaweicloud.com?part=15

  reply	other threads:[~2026-08-14 10:40 UTC|newest]

Thread overview: 65+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-08-14  9:32 [PATCH -next v5 00/32] ext4: use iomap for regular file's buffered I/O path Zhang Yi
2026-08-14  9:33 ` [PATCH -next v5 01/32] ext4: simplify size updating in ext4_setattr() Zhang Yi
2026-08-14 10:02   ` sashiko-bot
2026-08-14  9:33 ` [PATCH -next v5 02/32] ext4: factor out ext4_truncate_[up|down]() Zhang Yi
2026-08-14 10:04   ` sashiko-bot
2026-08-14  9:33 ` [PATCH -next v5 03/32] ext4: simplify error handling in ext4_setattr() Zhang Yi
2026-08-14 10:12   ` sashiko-bot
2026-08-14  9:33 ` [PATCH -next v5 04/32] ext4: skip ordered I/O wait when zeroing beyond i_disksize block Zhang Yi
2026-08-14 10:14   ` sashiko-bot
2026-08-14  9:33 ` [PATCH -next v5 05/32] ext4: set EXT4_MAP_NEW flag for delayed allocated blocks Zhang Yi
2026-08-14 10:08   ` sashiko-bot
2026-08-14  9:33 ` [PATCH -next v5 06/32] ext4: recheck extent status tree before block allocation Zhang Yi
2026-08-14 10:15   ` sashiko-bot
2026-08-14  9:33 ` [PATCH -next v5 07/32] ext4: fix orig_mlen initialization in ext4_map_blocks() Zhang Yi
2026-08-14 10:08   ` sashiko-bot
2026-08-14  9:33 ` [PATCH -next v5 08/32] ext4: allow ext4_map_blocks() to start its own transaction handle Zhang Yi
2026-08-14 10:00   ` sashiko-bot
2026-08-14  9:33 ` [PATCH -next v5 09/32] ext4: avoid unnecessary transaction in ext4_map_blocks() for unwritten extents Zhang Yi
2026-08-14 10:15   ` sashiko-bot
2026-08-14  9:33 ` [PATCH -next v5 10/32] ext4: skip block allocation for holes in the data submission path Zhang Yi
2026-08-14 10:15   ` sashiko-bot
2026-08-14  9:33 ` [PATCH -next v5 11/32] ext4: add iomap address space operations for buffered I/O Zhang Yi
2026-08-14 10:04   ` sashiko-bot
2026-08-14  9:33 ` [PATCH -next v5 12/32] ext4: implement buffered read path using iomap Zhang Yi
2026-08-14 10:15   ` sashiko-bot
2026-08-14  9:33 ` [PATCH -next v5 13/32] ext4: pass out extent seq counter when mapping da blocks Zhang Yi
2026-08-14 10:12   ` sashiko-bot
2026-08-14  9:33 ` [PATCH -next v5 14/32] ext4: do not use data=ordered mode for inodes using buffered iomap path Zhang Yi
2026-08-14 10:12   ` sashiko-bot
2026-08-14  9:33 ` [PATCH -next v5 15/32] ext4: implement buffered write path using iomap Zhang Yi
2026-08-14 10:40   ` sashiko-bot [this message]
2026-08-14  9:33 ` [PATCH -next v5 16/32] ext4: implement writeback " Zhang Yi
2026-08-14 10:19   ` sashiko-bot
2026-08-14  9:33 ` [PATCH -next v5 17/32] ext4: implement mmap " Zhang Yi
2026-08-14 10:35   ` sashiko-bot
2026-08-14  9:33 ` [PATCH -next v5 18/32] ext4: implement partial block zero range " Zhang Yi
2026-08-14 10:25   ` sashiko-bot
2026-08-14  9:33 ` [PATCH -next v5 19/32] ext4: tolerate unexpected holes in ext4_convert_unwritten_extents() Zhang Yi
2026-08-14 10:09   ` sashiko-bot
2026-08-14  9:33 ` [PATCH -next v5 20/32] ext4: add block mapping tracepoints for iomap buffered I/O path Zhang Yi
2026-08-14 10:08   ` sashiko-bot
2026-08-14  9:33 ` [PATCH -next v5 21/32] ext4: disable online defrag when inode using " Zhang Yi
2026-08-14 10:08   ` sashiko-bot
2026-08-14  9:33 ` [PATCH -next v5 22/32] ext4: add EXT4_STATE_DISKSIZE_GROW_PENDING state bit and helpers Zhang Yi
2026-08-14 10:09   ` sashiko-bot
2026-08-14  9:33 ` [PATCH -next v5 23/32] ext4: submit and wait for pending disksize-grow I/O on writeback Zhang Yi
2026-08-14 10:25   ` sashiko-bot
2026-08-14  9:33 ` [PATCH -next v5 24/32] ext4: advance i_disksize to i_size upon disksize-grow I/O completion Zhang Yi
2026-08-14 10:25   ` sashiko-bot
2026-08-14  9:33 ` [PATCH -next v5 25/32] ext4: defer i_disksize update while DISKSIZE_GROW_PENDING is set Zhang Yi
2026-08-14 10:31   ` sashiko-bot
2026-08-14  9:33 ` [PATCH -next v5 26/32] ext4: submit and wait for disksize-grow I/O in fallocate paths Zhang Yi
2026-08-14 10:28   ` sashiko-bot
2026-08-14  9:33 ` [PATCH -next v5 27/32] ext4: clear DISKSIZE_GROW_PENDING on truncate or error Zhang Yi
2026-08-14 10:31   ` sashiko-bot
2026-08-14  9:33 ` [PATCH -next v5 28/32] ext4: set DISKSIZE_GROW_PENDING after zeroing unaligned EOF block Zhang Yi
2026-08-14 10:18   ` sashiko-bot
2026-08-14  9:33 ` [PATCH -next v5 29/32] ext4: add tracepoints for DISKSIZE_GROW_PENDING set, clear, and wait Zhang Yi
2026-08-14 10:18   ` sashiko-bot
2026-08-14  9:33 ` [PATCH -next v5 30/32] ext4: add tracepoints for EOF block zeroing and disksize-grow I/O Zhang Yi
2026-08-14 10:19   ` sashiko-bot
2026-08-14  9:46 ` [PATCH -next v5 31/32] ext4: partially enable iomap for the buffered I/O path of regular files Zhang Yi
2026-08-14 10:39   ` sashiko-bot
2026-08-14  9:46 ` [PATCH -next v5 32/32] ext4: introduce a mount option for iomap buffered I/O path Zhang Yi
2026-08-14 10:25   ` sashiko-bot

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260814104055.7F2C21F000E9@smtp.kernel.org \
    --to=sashiko-bot@kernel.org \
    --cc=linux-ext4@vger.kernel.org \
    --cc=sashiko-reviews@lists.linux.dev \
    --cc=tytso@mit.edu \
    --cc=yi.zhang@huaweicloud.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox