[PATCH v5 00/14] mfd: lm3533: convert to OF bindings, improve support

[PATCH v5 00/14] mfd: lm3533: convert to OF bindings, improve support

[Svyatoslav Ryhel]

Convert LM3533 to OF bindings, add missing VIN supply, add support for
setting mapping mode and LED sources based on device tree. 

---
Changes in v2:

schema
- maximum led sources for leds set to 4
- anyOf > oneOf in ALS
- improved ALS descriptions
- adjusted example
drivers
- dropped devm convertion of irq and mfd helpers
- all als configuration moved into lm3533_als_setup
- added regulator/consumer.h
- lm3533_bl_setup set before sysfs_create_group in backlight
- added check if LVLED is valid
- LM3533_REG_OUTPUT_CONF1 > LM3533_REG_OUTPUT_CONF2 for LVLED4 and LVLED5

Changes in v3:

- ohm -> ohms
- added default PWM mask to schema
- added commit removing driver regmap wrappers
- added commits which flatten pdata helpers
- adjusted check if als->irq > 0 since als->irq can be negative if error/missing
- added count for children defined in device tree and mfd_cell is allocated
  via devm_kcalloc to be able to contain all of them
- fixed backlight boundary check
- fixed count increased unconditionally
- dev_err returns node name instead of reg value
- LM3533_MAX_CURRENT_* defines moved to common header since they are used to clamp
  current values read from the tree
- mapping mode commit splitted into 2 (sysfs logic improvement > mode from DT)
- backlight mode configuration set before sysfs group is created
- fixed LVLED check on LEDs setup
- added check if HVLED is valid
- fixed wrong err_sysfs_remove goto in lm3533_bl
- added commit implementing backlight_scale property

Changes in v4:

- fixed regmap_update_bits val and mask swap in lm3533_als_set_int_mode
- fixed als->irq check in store_thresh_either_en
- removed clamping of r_select in als driver
- added use_of_reg and of_reg for backlight and leds registration
- added intermediate step in asigning props.brightness
- fixed HVLED/LVLED configuration overwriting
- added bounds check for num_leds in leds and backlight driver
- switched to regmap_clean/set/assign/test_bits helpers where appropriate
- dropped extern from header function declartions
- switched lm3533 pointer in cell structures to regmap
- sysfs_create_group > device_add_group
- changes in backlight sysfs were expanded to all properties

Changes in v5:

- aligned driver helpers to use u32
- child nodes parsing linked with 'else if' to ensure there is one call per node
- removed redundant pwm var init for leds
- fixed regmap_test_bits return check
- fixed leds and backlight counting handling
- iterator variables made scoped
- lm3533_als_setup() set to exit after mode set if m0de is pwm
---

Svyatoslav Ryhel (14):
  dt-bindings: leds: Document TI LM3533 LED controller
  mfd: lm3533: Remove driver specific regmap wrappers
  mfd: lm3533: Remove extern from shared functions in the header
  mfd: lm3533: Pass only regmap and light sensor presence to child
    devices
  iio: light: lm3533-als: Remove redundant pdata helpers
  mfd: lm3533-core: Remove redundant pdata helpers
  mfd: lm3533: Use dev_groups in struct device_driver
  mfd: lm3533: Convert to use OF bindings
  mfd: lm3533: Add support for VIN power supply
  mfd: lm3533: Set DMA mask
  video: backlight: lm3533_bl: Improve logic of sysfs functions
  video: backlight: lm3533_bl: Set initial mapping mode from DT
  video: backlight: lm3533_bl: Implement backlight_scale property
  video: leds: backlight: lm3533: Support getting LED sources from DT

 .../leds/backlight/ti,lm3533-backlight.yaml   |  69 ++++
 .../bindings/leds/ti,lm3533-leds.yaml         |  67 ++++
 .../devicetree/bindings/leds/ti,lm3533.yaml   | 169 ++++++++
 drivers/iio/light/lm3533-als.c                | 180 ++++-----
 drivers/leds/leds-lm3533.c                    | 184 ++++++---
 drivers/mfd/lm3533-core.c                     | 375 +++++++-----------
 drivers/mfd/lm3533-ctrlbank.c                 |  33 +-
 drivers/video/backlight/lm3533_bl.c           | 232 ++++++-----
 include/linux/mfd/lm3533.h                    |  75 +---
 9 files changed, 821 insertions(+), 563 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/leds/backlight/ti,lm3533-backlight.yaml
 create mode 100644 Documentation/devicetree/bindings/leds/ti,lm3533-leds.yaml
 create mode 100644 Documentation/devicetree/bindings/leds/ti,lm3533.yaml

-- 
2.53.0

[PATCH v5 01/14] dt-bindings: leds: Document TI LM3533 LED controller

[Svyatoslav Ryhel]

Document the LM3533 - a complete power source for backlight, keypad and
indicator LEDs in smartphone handsets. The high-voltage inductive boost
converter provides the power for two series LED strings display backlight
and keypad functions.

Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Jonathan Cameron <jic23@kernel.org> #for light sensor
Reviewed-by: Daniel Thompson (RISCstar) <danielt@kernel.org> #for backlight
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
---
 .../leds/backlight/ti,lm3533-backlight.yaml   |  69 +++++++
 .../bindings/leds/ti,lm3533-leds.yaml         |  67 +++++++
 .../devicetree/bindings/leds/ti,lm3533.yaml   | 169 ++++++++++++++++++
 3 files changed, 305 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/leds/backlight/ti,lm3533-backlight.yaml
 create mode 100644 Documentation/devicetree/bindings/leds/ti,lm3533-leds.yaml
 create mode 100644 Documentation/devicetree/bindings/leds/ti,lm3533.yaml

diff --git a/Documentation/devicetree/bindings/leds/backlight/ti,lm3533-backlight.yaml b/Documentation/devicetree/bindings/leds/backlight/ti,lm3533-backlight.yaml
new file mode 100644
index 000000000000..a25846e9b375
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/backlight/ti,lm3533-backlight.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/backlight/ti,lm3533-backlight.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI LM3533 high voltage series LED strings
+
+description:
+  This is part of the TI LM3533 MFD device. It represents two high voltage series
+  LED strings for display backlight controlled by the TI LM3533.
+
+maintainers:
+  - Svyatoslav Ryhel <clamor95@gmail.com>
+
+allOf:
+  - $ref: /schemas/leds/backlight/common.yaml#
+
+properties:
+  compatible:
+    const: ti,lm3533-backlight
+
+  reg:
+    description: Control bank selection (0 = bank A, 1 = bank B).
+    maximum: 1
+
+  led-max-microamp:
+    description: maximum current in uA with a 800 uA step.
+    minimum: 5000
+    maximum: 29800
+    default: 5000
+
+  led-sources:
+    description: |
+      HVLED strings associated with this control bank:
+        0 - HVLED1
+        1 - HVLED2
+    minItems: 1
+    maxItems: 2
+    items:
+      maximum: 1
+
+  ti,pwm-config-mask:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Control Bank PWM Configuration Register mask that allows to configure
+      PWM input in Zones 0-4
+      BIT(0) - PWM Input is enabled
+      BIT(1) - PWM Input is enabled in Zone 0
+      BIT(2) - PWM Input is enabled in Zone 1
+      BIT(3) - PWM Input is enabled in Zone 2
+      BIT(4) - PWM Input is enabled in Zone 3
+      BIT(5) - PWM Input is enabled in Zone 4
+    default: 0
+
+  ti,linear-mapping-mode:
+    description:
+      Enable linear mapping mode. If disabled, then it will use exponential
+      mapping mode in which the ramp up/down appears to have a more uniform
+      transition to the human eye.
+    type: boolean
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+# see ti,lm3533.yaml for an example
diff --git a/Documentation/devicetree/bindings/leds/ti,lm3533-leds.yaml b/Documentation/devicetree/bindings/leds/ti,lm3533-leds.yaml
new file mode 100644
index 000000000000..d8dbefef3323
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/ti,lm3533-leds.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/ti,lm3533-leds.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI LM3533 low voltage control banks for individual LEDs
+
+description:
+  This is part of the TI LM3533 MFD device. It represents four low voltage
+  control banks for individual LEDs provided by the TI LM3533.
+
+maintainers:
+  - Svyatoslav Ryhel <clamor95@gmail.com>
+
+allOf:
+  - $ref: /schemas/leds/common.yaml#
+
+properties:
+  compatible:
+    const: ti,lm3533-leds
+
+  reg:
+    description:
+      Control bank selection (2 = bank C, 3 = bank D, 4 = bank E, 5 = bank F).
+    minimum: 2
+    maximum: 5
+
+  led-max-microamp:
+    description: maximum current in uA with a 800 uA step.
+    minimum: 5000
+    maximum: 29800
+    default: 5000
+
+  led-sources:
+    description: |
+      LVLED associated with this control bank. May be more than 1 source per bank.
+        0 - LVLED1
+        1 - LVLED2
+        2 - LVLED3
+        3 - LVLED4
+        4 - LVLED5
+    minItems: 1
+    maxItems: 5
+    items:
+      maximum: 4
+
+  ti,pwm-config-mask:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Control Bank PWM Configuration Register mask that allows to configure
+      PWM input in Zones 0-4
+      BIT(0) - PWM Input is enabled
+      BIT(1) - PWM Input is enabled in Zone 0
+      BIT(2) - PWM Input is enabled in Zone 1
+      BIT(3) - PWM Input is enabled in Zone 2
+      BIT(4) - PWM Input is enabled in Zone 3
+      BIT(5) - PWM Input is enabled in Zone 4
+    default: 0
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+# see ti,lm3533.yaml for an example
diff --git a/Documentation/devicetree/bindings/leds/ti,lm3533.yaml b/Documentation/devicetree/bindings/leds/ti,lm3533.yaml
new file mode 100644
index 000000000000..bdc05a9f3d66
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/ti,lm3533.yaml
@@ -0,0 +1,169 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/ti,lm3533.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI LM3533 Complete Lighting Power Solution
+
+description: >
+  The LM3533 is a complete power source for backlight, keypad, and indicator LEDs
+  in smartphone handsets. The high-voltage inductive boost converter provides the
+  power for two high voltage series LED strings for display backlight and four low
+  voltage control banks for individual LEDs. Additionally, LM3533 features an
+  interface for an external light sensor.
+
+  https://www.ti.com/product/LM3533
+
+maintainers:
+  - Svyatoslav Ryhel <clamor95@gmail.com>
+
+properties:
+  compatible:
+    const: ti,lm3533
+
+  reg:
+    maxItems: 1
+
+  enable-gpios:
+    description: GPIO connected to the HWEN pin.
+    maxItems: 1
+
+  vin-supply:
+    description: Supply connected to the IN line (2.7 V to 5.5 V).
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  ti,boost-ovp-microvolt:
+    description: boost OVP select (16V, 24V, 32V, 40V)
+    enum: [ 16000000, 24000000, 32000000, 40000000 ]
+    default: 16000000
+
+  ti,boost-freq-hz:
+    description: boost frequency select (500KHz or 1MHz)
+    enum: [ 500000, 1000000 ]
+    default: 500000
+
+  light-sensor:
+    type: object
+    additionalProperties: false
+
+    properties:
+      compatible:
+        const: ti,lm3533-als
+
+      interrupts:
+        maxItems: 1
+
+      ti,resistor-ohms:
+        description:
+          Internal configuration resistor value when light sensor is in
+          Analog Sensor mode and PWM mode is disabled. The expectation is
+          the input is a current from the external analog light sensor and
+          this is used to convert it to a voltage within the target range.
+        minimum: 1575
+        maximum: 200000
+
+      ti,pwm-mode:
+        type: boolean
+        description:
+          Switch for mode in which light sensor interface is running. If
+          this property is set then the light sensor interface is running
+          in PWM mode, internal resistor value is set to high-impedance (0)
+          and ti,resistor-ohms property is ignored.
+
+    required:
+      - compatible
+
+    oneOf:
+      - required:
+          - ti,resistor-ohms
+      - required:
+          - ti,pwm-mode
+
+patternProperties:
+  "^backlight@[01]$":
+    $ref: /schemas/leds/backlight/ti,lm3533-backlight.yaml#
+
+  "^led@[2-5]$":
+    $ref: /schemas/leds/ti,lm3533-leds.yaml#
+
+required:
+  - compatible
+  - reg
+  - '#address-cells'
+  - '#size-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        led-controller@36 {
+            compatible = "ti,lm3533";
+            reg = <0x36>;
+
+            enable-gpios = <&gpio 110 GPIO_ACTIVE_HIGH>;
+            vin-supply = <&vdd_3v3_bat>;
+
+            ti,boost-ovp-microvolt = <24000000>;
+            ti,boost-freq-hz = <500000>;
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            backlight@0 {
+                compatible = "ti,lm3533-backlight";
+                reg = <0>;
+
+                default-brightness = <113>;
+
+                led-max-microamp = <23400>;
+                led-sources = <0 1>;
+            };
+
+            led@2 {
+                compatible = "ti,lm3533-leds";
+                reg = <2>;
+
+                led-max-microamp = <23400>;
+                led-sources = <0 1>;
+            };
+
+            led@4 {
+                compatible = "ti,lm3533-leds";
+                reg = <4>;
+
+                led-max-microamp = <23400>;
+                led-sources = <2>;
+            };
+
+            led@5 {
+                compatible = "ti,lm3533-leds";
+                reg = <5>;
+
+                led-max-microamp = <23400>;
+                led-sources = <3 4>;
+            };
+
+            light-sensor {
+                compatible = "ti,lm3533-als";
+
+                interrupt-parent = <&gpio>;
+                interrupts = <80 IRQ_TYPE_LEVEL_LOW>;
+
+                ti,pwm-mode;
+            };
+        };
+    };
+...
-- 
2.53.0

[PATCH v5 02/14] mfd: lm3533: Remove driver specific regmap wrappers

[Svyatoslav Ryhel]

Remove driver-specific regmap wrappers in favor of using regmap helpers
directly.

Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
---
 drivers/iio/light/lm3533-als.c      | 79 +++++++++++++----------------
 drivers/leds/leds-lm3533.c          | 62 ++++++++--------------
 drivers/mfd/lm3533-core.c           | 73 ++++----------------------
 drivers/mfd/lm3533-ctrlbank.c       | 28 +++++-----
 drivers/video/backlight/lm3533_bl.c | 37 +++++---------
 include/linux/mfd/lm3533.h          | 15 ++----
 6 files changed, 100 insertions(+), 194 deletions(-)

diff --git a/drivers/iio/light/lm3533-als.c b/drivers/iio/light/lm3533-als.c
index 99f0b903018c..44b104c2d77f 100644
--- a/drivers/iio/light/lm3533-als.c
+++ b/drivers/iio/light/lm3533-als.c
@@ -17,6 +17,7 @@
 #include <linux/mutex.h>
 #include <linux/mfd/core.h>
 #include <linux/platform_device.h>
+#include <linux/regmap.h>
 #include <linux/slab.h>
 #include <linux/uaccess.h>
 
@@ -64,7 +65,7 @@ static int lm3533_als_get_adc(struct iio_dev *indio_dev, bool average,
 {
 	struct lm3533_als *als = iio_priv(indio_dev);
 	u8 reg;
-	u8 val;
+	u32 val;
 	int ret;
 
 	if (average)
@@ -72,7 +73,7 @@ static int lm3533_als_get_adc(struct iio_dev *indio_dev, bool average,
 	else
 		reg = LM3533_REG_ALS_READ_ADC_RAW;
 
-	ret = lm3533_read(als->lm3533, reg, &val);
+	ret = regmap_read(als->lm3533->regmap, reg, &val);
 	if (ret) {
 		dev_err(&indio_dev->dev, "failed to read adc\n");
 		return ret;
@@ -86,10 +87,10 @@ static int lm3533_als_get_adc(struct iio_dev *indio_dev, bool average,
 static int _lm3533_als_get_zone(struct iio_dev *indio_dev, u8 *zone)
 {
 	struct lm3533_als *als = iio_priv(indio_dev);
-	u8 val;
+	u32 val;
 	int ret;
 
-	ret = lm3533_read(als->lm3533, LM3533_REG_ALS_ZONE_INFO, &val);
+	ret = regmap_read(als->lm3533->regmap, LM3533_REG_ALS_ZONE_INFO, &val);
 	if (ret) {
 		dev_err(&indio_dev->dev, "failed to read zone\n");
 		return ret;
@@ -127,7 +128,7 @@ static inline u8 lm3533_als_get_target_reg(unsigned channel, unsigned zone)
 }
 
 static int lm3533_als_get_target(struct iio_dev *indio_dev, unsigned channel,
-							unsigned zone, u8 *val)
+				 unsigned zone, u32 *val)
 {
 	struct lm3533_als *als = iio_priv(indio_dev);
 	u8 reg;
@@ -140,7 +141,7 @@ static int lm3533_als_get_target(struct iio_dev *indio_dev, unsigned channel,
 		return -EINVAL;
 
 	reg = lm3533_als_get_target_reg(channel, zone);
-	ret = lm3533_read(als->lm3533, reg, val);
+	ret = regmap_read(als->lm3533->regmap, reg, val);
 	if (ret)
 		dev_err(&indio_dev->dev, "failed to get target current\n");
 
@@ -161,7 +162,7 @@ static int lm3533_als_set_target(struct iio_dev *indio_dev, unsigned channel,
 		return -EINVAL;
 
 	reg = lm3533_als_get_target_reg(channel, zone);
-	ret = lm3533_write(als->lm3533, reg, val);
+	ret = regmap_write(als->lm3533->regmap, reg, val);
 	if (ret)
 		dev_err(&indio_dev->dev, "failed to set target current\n");
 
@@ -171,8 +172,8 @@ static int lm3533_als_set_target(struct iio_dev *indio_dev, unsigned channel,
 static int lm3533_als_get_current(struct iio_dev *indio_dev, unsigned channel,
 								int *val)
 {
+	u32 target;
 	u8 zone;
-	u8 target;
 	int ret;
 
 	ret = lm3533_als_get_zone(indio_dev, &zone);
@@ -271,16 +272,10 @@ static irqreturn_t lm3533_als_isr(int irq, void *dev_id)
 static int lm3533_als_set_int_mode(struct iio_dev *indio_dev, int enable)
 {
 	struct lm3533_als *als = iio_priv(indio_dev);
-	u8 mask = LM3533_ALS_INT_ENABLE_MASK;
-	u8 val;
 	int ret;
 
-	if (enable)
-		val = mask;
-	else
-		val = 0;
-
-	ret = lm3533_update(als->lm3533, LM3533_REG_ALS_ZONE_INFO, val, mask);
+	ret = regmap_assign_bits(als->lm3533->regmap, LM3533_REG_ALS_ZONE_INFO,
+				 LM3533_ALS_INT_ENABLE_MASK, enable);
 	if (ret) {
 		dev_err(&indio_dev->dev, "failed to set int mode %d\n",
 								enable);
@@ -293,17 +288,16 @@ static int lm3533_als_set_int_mode(struct iio_dev *indio_dev, int enable)
 static int lm3533_als_get_int_mode(struct iio_dev *indio_dev, int *enable)
 {
 	struct lm3533_als *als = iio_priv(indio_dev);
-	u8 mask = LM3533_ALS_INT_ENABLE_MASK;
-	u8 val;
 	int ret;
 
-	ret = lm3533_read(als->lm3533, LM3533_REG_ALS_ZONE_INFO, &val);
-	if (ret) {
+	ret = regmap_test_bits(als->lm3533->regmap, LM3533_REG_ALS_ZONE_INFO,
+			       LM3533_ALS_INT_ENABLE_MASK);
+	if (ret < 0) {
 		dev_err(&indio_dev->dev, "failed to get int mode\n");
 		return ret;
 	}
 
-	*enable = !!(val & mask);
+	*enable = ret;
 
 	return 0;
 }
@@ -316,7 +310,7 @@ static inline u8 lm3533_als_get_threshold_reg(unsigned nr, bool raising)
 }
 
 static int lm3533_als_get_threshold(struct iio_dev *indio_dev, unsigned nr,
-							bool raising, u8 *val)
+				    bool raising, u32 *val)
 {
 	struct lm3533_als *als = iio_priv(indio_dev);
 	u8 reg;
@@ -326,7 +320,7 @@ static int lm3533_als_get_threshold(struct iio_dev *indio_dev, unsigned nr,
 		return -EINVAL;
 
 	reg = lm3533_als_get_threshold_reg(nr, raising);
-	ret = lm3533_read(als->lm3533, reg, val);
+	ret = regmap_read(als->lm3533->regmap, reg, val);
 	if (ret)
 		dev_err(&indio_dev->dev, "failed to get threshold\n");
 
@@ -337,8 +331,8 @@ static int lm3533_als_set_threshold(struct iio_dev *indio_dev, unsigned nr,
 							bool raising, u8 val)
 {
 	struct lm3533_als *als = iio_priv(indio_dev);
-	u8 val2;
 	u8 reg, reg2;
+	u32 val2;
 	int ret;
 
 	if (nr > LM3533_ALS_THRESH_MAX)
@@ -348,7 +342,7 @@ static int lm3533_als_set_threshold(struct iio_dev *indio_dev, unsigned nr,
 	reg2 = lm3533_als_get_threshold_reg(nr, !raising);
 
 	mutex_lock(&als->thresh_mutex);
-	ret = lm3533_read(als->lm3533, reg2, &val2);
+	ret = regmap_read(als->lm3533->regmap, reg2, &val2);
 	if (ret) {
 		dev_err(&indio_dev->dev, "failed to get threshold\n");
 		goto out;
@@ -363,7 +357,7 @@ static int lm3533_als_set_threshold(struct iio_dev *indio_dev, unsigned nr,
 		goto out;
 	}
 
-	ret = lm3533_write(als->lm3533, reg, val);
+	ret = regmap_write(als->lm3533->regmap, reg, val);
 	if (ret) {
 		dev_err(&indio_dev->dev, "failed to set threshold\n");
 		goto out;
@@ -375,11 +369,11 @@ static int lm3533_als_set_threshold(struct iio_dev *indio_dev, unsigned nr,
 }
 
 static int lm3533_als_get_hysteresis(struct iio_dev *indio_dev, unsigned nr,
-								u8 *val)
+				     u32 *val)
 {
 	struct lm3533_als *als = iio_priv(indio_dev);
-	u8 falling;
-	u8 raising;
+	u32 falling;
+	u32 raising;
 	int ret;
 
 	if (nr > LM3533_ALS_THRESH_MAX)
@@ -503,7 +497,7 @@ static ssize_t show_als_attr(struct device *dev,
 {
 	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct lm3533_als_attribute *als_attr = to_lm3533_als_attr(attr);
-	u8 val;
+	u32 val;
 	int ret;
 
 	switch (als_attr->type) {
@@ -716,16 +710,10 @@ static const struct attribute_group lm3533_als_attribute_group = {
 
 static int lm3533_als_set_input_mode(struct lm3533_als *als, bool pwm_mode)
 {
-	u8 mask = LM3533_ALS_INPUT_MODE_MASK;
-	u8 val;
 	int ret;
 
-	if (pwm_mode)
-		val = mask;	/* pwm input */
-	else
-		val = 0;	/* analog input */
-
-	ret = lm3533_update(als->lm3533, LM3533_REG_ALS_CONF, val, mask);
+	ret = regmap_assign_bits(als->lm3533->regmap, LM3533_REG_ALS_CONF,
+				 LM3533_ALS_INPUT_MODE_MASK, pwm_mode);
 	if (ret) {
 		dev_err(&als->pdev->dev, "failed to set input mode %d\n",
 								pwm_mode);
@@ -744,7 +732,8 @@ static int lm3533_als_set_resistor(struct lm3533_als *als, u8 val)
 		return -EINVAL;
 	}
 
-	ret = lm3533_write(als->lm3533, LM3533_REG_ALS_RESISTOR_SELECT, val);
+	ret = regmap_write(als->lm3533->regmap, LM3533_REG_ALS_RESISTOR_SELECT,
+			   val);
 	if (ret) {
 		dev_err(&als->pdev->dev, "failed to set resistor\n");
 		return ret;
@@ -774,11 +763,11 @@ static int lm3533_als_setup(struct lm3533_als *als,
 
 static int lm3533_als_setup_irq(struct lm3533_als *als, void *dev)
 {
-	u8 mask = LM3533_ALS_INT_ENABLE_MASK;
 	int ret;
 
 	/* Make sure interrupts are disabled. */
-	ret = lm3533_update(als->lm3533, LM3533_REG_ALS_ZONE_INFO, 0, mask);
+	ret = regmap_clear_bits(als->lm3533->regmap, LM3533_REG_ALS_ZONE_INFO,
+				LM3533_ALS_INT_ENABLE_MASK);
 	if (ret) {
 		dev_err(&als->pdev->dev, "failed to disable interrupts\n");
 		return ret;
@@ -798,10 +787,10 @@ static int lm3533_als_setup_irq(struct lm3533_als *als, void *dev)
 
 static int lm3533_als_enable(struct lm3533_als *als)
 {
-	u8 mask = LM3533_ALS_ENABLE_MASK;
 	int ret;
 
-	ret = lm3533_update(als->lm3533, LM3533_REG_ALS_CONF, mask, mask);
+	ret = regmap_set_bits(als->lm3533->regmap, LM3533_REG_ALS_CONF,
+			      LM3533_ALS_ENABLE_MASK);
 	if (ret)
 		dev_err(&als->pdev->dev, "failed to enable ALS\n");
 
@@ -810,10 +799,10 @@ static int lm3533_als_enable(struct lm3533_als *als)
 
 static int lm3533_als_disable(struct lm3533_als *als)
 {
-	u8 mask = LM3533_ALS_ENABLE_MASK;
 	int ret;
 
-	ret = lm3533_update(als->lm3533, LM3533_REG_ALS_CONF, 0, mask);
+	ret = regmap_clear_bits(als->lm3533->regmap, LM3533_REG_ALS_CONF,
+				LM3533_ALS_ENABLE_MASK);
 	if (ret)
 		dev_err(&als->pdev->dev, "failed to disable ALS\n");
 
diff --git a/drivers/leds/leds-lm3533.c b/drivers/leds/leds-lm3533.c
index 45795f2a1042..335c758071f3 100644
--- a/drivers/leds/leds-lm3533.c
+++ b/drivers/leds/leds-lm3533.c
@@ -12,6 +12,7 @@
 #include <linux/mfd/core.h>
 #include <linux/mutex.h>
 #include <linux/platform_device.h>
+#include <linux/regmap.h>
 #include <linux/slab.h>
 
 #include <linux/mfd/lm3533.h>
@@ -80,7 +81,6 @@ static inline u8 lm3533_led_get_pattern_reg(struct lm3533_led *led,
 static int lm3533_led_pattern_enable(struct lm3533_led *led, int enable)
 {
 	u8 mask;
-	u8 val;
 	int pattern;
 	int state;
 	int ret = 0;
@@ -96,12 +96,8 @@ static int lm3533_led_pattern_enable(struct lm3533_led *led, int enable)
 	pattern = lm3533_led_get_pattern(led);
 	mask = 1 << (2 * pattern);
 
-	if (enable)
-		val = mask;
-	else
-		val = 0;
-
-	ret = lm3533_update(led->lm3533, LM3533_REG_PATTERN_ENABLE, val, mask);
+	ret = regmap_assign_bits(led->lm3533->regmap,
+				 LM3533_REG_PATTERN_ENABLE, mask, enable);
 	if (ret) {
 		dev_err(led->cdev.dev, "failed to enable pattern %d (%d)\n",
 							pattern, enable);
@@ -131,7 +127,7 @@ static int lm3533_led_set(struct led_classdev *cdev,
 static enum led_brightness lm3533_led_get(struct led_classdev *cdev)
 {
 	struct lm3533_led *led = to_lm3533_led(cdev);
-	u8 val;
+	u32 val;
 	int ret;
 
 	ret = lm3533_ctrlbank_get_brightness(&led->cb, &val);
@@ -259,7 +255,7 @@ static u8 lm3533_led_delay_set(struct lm3533_led *led, u8 base,
 	dev_dbg(led->cdev.dev, "%s - %lu: %u (0x%02x)\n", __func__,
 							*delay, t, val);
 	reg = lm3533_led_get_pattern_reg(led, base);
-	ret = lm3533_write(led->lm3533, reg, val);
+	ret = regmap_write(led->lm3533->regmap, reg, val);
 	if (ret)
 		dev_err(led->cdev.dev, "failed to set delay (%02x)\n", reg);
 
@@ -337,10 +333,10 @@ static ssize_t show_risefalltime(struct device *dev,
 	struct lm3533_led *led = to_lm3533_led(led_cdev);
 	ssize_t ret;
 	u8 reg;
-	u8 val;
+	u32 val;
 
 	reg = lm3533_led_get_pattern_reg(led, base);
-	ret = lm3533_read(led->lm3533, reg, &val);
+	ret = regmap_read(led->lm3533->regmap, reg, &val);
 	if (ret)
 		return ret;
 
@@ -375,7 +371,7 @@ static ssize_t store_risefalltime(struct device *dev,
 		return -EINVAL;
 
 	reg = lm3533_led_get_pattern_reg(led, base);
-	ret = lm3533_write(led->lm3533, reg, val);
+	ret = regmap_write(led->lm3533->regmap, reg, val);
 	if (ret)
 		return ret;
 
@@ -405,11 +401,11 @@ static ssize_t show_als_channel(struct device *dev,
 	struct lm3533_led *led = to_lm3533_led(led_cdev);
 	unsigned channel;
 	u8 reg;
-	u8 val;
+	u32 val;
 	int ret;
 
 	reg = lm3533_led_get_lv_reg(led, LM3533_REG_CTRLBANK_BCONF_BASE);
-	ret = lm3533_read(led->lm3533, reg, &val);
+	ret = regmap_read(led->lm3533->regmap, reg, &val);
 	if (ret)
 		return ret;
 
@@ -441,7 +437,7 @@ static ssize_t store_als_channel(struct device *dev,
 	mask = LM3533_REG_CTRLBANK_BCONF_ALS_CHANNEL_MASK;
 	val = channel - 1;
 
-	ret = lm3533_update(led->lm3533, reg, val, mask);
+	ret = regmap_update_bits(led->lm3533->regmap, reg, mask, val);
 	if (ret)
 		return ret;
 
@@ -455,11 +451,11 @@ static ssize_t show_als_en(struct device *dev,
 	struct lm3533_led *led = to_lm3533_led(led_cdev);
 	bool enable;
 	u8 reg;
-	u8 val;
+	u32 val;
 	int ret;
 
 	reg = lm3533_led_get_lv_reg(led, LM3533_REG_CTRLBANK_BCONF_BASE);
-	ret = lm3533_read(led->lm3533, reg, &val);
+	ret = regmap_read(led->lm3533->regmap, reg, &val);
 	if (ret)
 		return ret;
 
@@ -476,22 +472,15 @@ static ssize_t store_als_en(struct device *dev,
 	struct lm3533_led *led = to_lm3533_led(led_cdev);
 	unsigned enable;
 	u8 reg;
-	u8 mask;
-	u8 val;
 	int ret;
 
 	if (kstrtouint(buf, 0, &enable))
 		return -EINVAL;
 
 	reg = lm3533_led_get_lv_reg(led, LM3533_REG_CTRLBANK_BCONF_BASE);
-	mask = LM3533_REG_CTRLBANK_BCONF_ALS_EN_MASK;
 
-	if (enable)
-		val = mask;
-	else
-		val = 0;
-
-	ret = lm3533_update(led->lm3533, reg, val, mask);
+	ret = regmap_assign_bits(led->lm3533->regmap, reg,
+				 LM3533_REG_CTRLBANK_BCONF_ALS_EN_MASK, enable);
 	if (ret)
 		return ret;
 
@@ -504,12 +493,12 @@ static ssize_t show_linear(struct device *dev,
 	struct led_classdev *led_cdev = dev_get_drvdata(dev);
 	struct lm3533_led *led = to_lm3533_led(led_cdev);
 	u8 reg;
-	u8 val;
+	u32 val;
 	int linear;
 	int ret;
 
 	reg = lm3533_led_get_lv_reg(led, LM3533_REG_CTRLBANK_BCONF_BASE);
-	ret = lm3533_read(led->lm3533, reg, &val);
+	ret = regmap_read(led->lm3533->regmap, reg, &val);
 	if (ret)
 		return ret;
 
@@ -529,22 +518,15 @@ static ssize_t store_linear(struct device *dev,
 	struct lm3533_led *led = to_lm3533_led(led_cdev);
 	unsigned long linear;
 	u8 reg;
-	u8 mask;
-	u8 val;
 	int ret;
 
 	if (kstrtoul(buf, 0, &linear))
 		return -EINVAL;
 
 	reg = lm3533_led_get_lv_reg(led, LM3533_REG_CTRLBANK_BCONF_BASE);
-	mask = LM3533_REG_CTRLBANK_BCONF_MAPPING_MASK;
 
-	if (linear)
-		val = mask;
-	else
-		val = 0;
-
-	ret = lm3533_update(led->lm3533, reg, val, mask);
+	ret = regmap_assign_bits(led->lm3533->regmap, reg,
+				 LM3533_REG_CTRLBANK_BCONF_MAPPING_MASK, linear);
 	if (ret)
 		return ret;
 
@@ -557,7 +539,7 @@ static ssize_t show_pwm(struct device *dev,
 {
 	struct led_classdev *led_cdev = dev_get_drvdata(dev);
 	struct lm3533_led *led = to_lm3533_led(led_cdev);
-	u8 val;
+	u32 val;
 	int ret;
 
 	ret = lm3533_ctrlbank_get_pwm(&led->cb, &val);
@@ -573,10 +555,10 @@ static ssize_t store_pwm(struct device *dev,
 {
 	struct led_classdev *led_cdev = dev_get_drvdata(dev);
 	struct lm3533_led *led = to_lm3533_led(led_cdev);
-	u8 val;
+	u32 val;
 	int ret;
 
-	if (kstrtou8(buf, 0, &val))
+	if (kstrtou32(buf, 0, &val))
 		return -EINVAL;
 
 	ret = lm3533_ctrlbank_set_pwm(&led->cb, val);
diff --git a/drivers/mfd/lm3533-core.c b/drivers/mfd/lm3533-core.c
index 0a2409d00b2e..f9bdc0a1d9be 100644
--- a/drivers/mfd/lm3533-core.c
+++ b/drivers/mfd/lm3533-core.c
@@ -80,66 +80,14 @@ static struct mfd_cell lm3533_led_devs[] = {
 	},
 };
 
-int lm3533_read(struct lm3533 *lm3533, u8 reg, u8 *val)
-{
-	int tmp;
-	int ret;
-
-	ret = regmap_read(lm3533->regmap, reg, &tmp);
-	if (ret < 0) {
-		dev_err(lm3533->dev, "failed to read register %02x: %d\n",
-								reg, ret);
-		return ret;
-	}
-
-	*val = tmp;
-
-	dev_dbg(lm3533->dev, "read [%02x]: %02x\n", reg, *val);
-
-	return ret;
-}
-EXPORT_SYMBOL_GPL(lm3533_read);
-
-int lm3533_write(struct lm3533 *lm3533, u8 reg, u8 val)
-{
-	int ret;
-
-	dev_dbg(lm3533->dev, "write [%02x]: %02x\n", reg, val);
-
-	ret = regmap_write(lm3533->regmap, reg, val);
-	if (ret < 0) {
-		dev_err(lm3533->dev, "failed to write register %02x: %d\n",
-								reg, ret);
-	}
-
-	return ret;
-}
-EXPORT_SYMBOL_GPL(lm3533_write);
-
-int lm3533_update(struct lm3533 *lm3533, u8 reg, u8 val, u8 mask)
-{
-	int ret;
-
-	dev_dbg(lm3533->dev, "update [%02x]: %02x/%02x\n", reg, val, mask);
-
-	ret = regmap_update_bits(lm3533->regmap, reg, mask, val);
-	if (ret < 0) {
-		dev_err(lm3533->dev, "failed to update register %02x: %d\n",
-								reg, ret);
-	}
-
-	return ret;
-}
-EXPORT_SYMBOL_GPL(lm3533_update);
-
 static int lm3533_set_boost_freq(struct lm3533 *lm3533,
 						enum lm3533_boost_freq freq)
 {
 	int ret;
 
-	ret = lm3533_update(lm3533, LM3533_REG_BOOST_PWM,
-					freq << LM3533_BOOST_FREQ_SHIFT,
-					LM3533_BOOST_FREQ_MASK);
+	ret = regmap_update_bits(lm3533->regmap, LM3533_REG_BOOST_PWM,
+				 LM3533_BOOST_FREQ_MASK,
+				 freq << LM3533_BOOST_FREQ_SHIFT);
 	if (ret)
 		dev_err(lm3533->dev, "failed to set boost frequency\n");
 
@@ -152,9 +100,9 @@ static int lm3533_set_boost_ovp(struct lm3533 *lm3533,
 {
 	int ret;
 
-	ret = lm3533_update(lm3533, LM3533_REG_BOOST_PWM,
-					ovp << LM3533_BOOST_OVP_SHIFT,
-					LM3533_BOOST_OVP_MASK);
+	ret = regmap_update_bits(lm3533->regmap, LM3533_REG_BOOST_PWM,
+				 LM3533_BOOST_OVP_MASK,
+				 ovp << LM3533_BOOST_OVP_SHIFT);
 	if (ret)
 		dev_err(lm3533->dev, "failed to set boost ovp\n");
 
@@ -181,7 +129,8 @@ static int lm3533_set_hvled_config(struct lm3533 *lm3533, u8 hvled, u8 bl)
 	mask = LM3533_BL_ID_MASK << shift;
 	val = bl << shift;
 
-	ret = lm3533_update(lm3533, LM3533_REG_OUTPUT_CONF1, val, mask);
+	ret = regmap_update_bits(lm3533->regmap, LM3533_REG_OUTPUT_CONF1,
+				 mask, val);
 	if (ret)
 		dev_err(lm3533->dev, "failed to set hvled config\n");
 
@@ -216,7 +165,7 @@ static int lm3533_set_lvled_config(struct lm3533 *lm3533, u8 lvled, u8 led)
 	mask = LM3533_LED_ID_MASK << shift;
 	val = led << shift;
 
-	ret = lm3533_update(lm3533, reg, val, mask);
+	ret = regmap_update_bits(lm3533->regmap, reg, mask, val);
 	if (ret)
 		dev_err(lm3533->dev, "failed to set lvled config\n");
 
@@ -258,7 +207,7 @@ static ssize_t show_output(struct device *dev,
 	struct lm3533_device_attribute *lattr = to_lm3533_dev_attr(attr);
 	int id = lattr->u.output.id;
 	u8 reg;
-	u8 val;
+	u32 val;
 	u8 mask;
 	int shift;
 	int ret;
@@ -278,7 +227,7 @@ static ssize_t show_output(struct device *dev,
 		mask = LM3533_LED_ID_MASK << shift;
 	}
 
-	ret = lm3533_read(lm3533, reg, &val);
+	ret = regmap_read(lm3533->regmap, reg, &val);
 	if (ret)
 		return ret;
 
diff --git a/drivers/mfd/lm3533-ctrlbank.c b/drivers/mfd/lm3533-ctrlbank.c
index 2537dfade51c..c2b5fd38b81d 100644
--- a/drivers/mfd/lm3533-ctrlbank.c
+++ b/drivers/mfd/lm3533-ctrlbank.c
@@ -9,6 +9,7 @@
 
 #include <linux/device.h>
 #include <linux/module.h>
+#include <linux/regmap.h>
 
 #include <linux/mfd/lm3533.h>
 
@@ -38,8 +39,8 @@ int lm3533_ctrlbank_enable(struct lm3533_ctrlbank *cb)
 	dev_dbg(cb->dev, "%s - %d\n", __func__, cb->id);
 
 	mask = 1 << cb->id;
-	ret = lm3533_update(cb->lm3533, LM3533_REG_CTRLBANK_ENABLE,
-								mask, mask);
+	ret = regmap_set_bits(cb->lm3533->regmap, LM3533_REG_CTRLBANK_ENABLE,
+			      mask);
 	if (ret)
 		dev_err(cb->dev, "failed to enable ctrlbank %d\n", cb->id);
 
@@ -55,7 +56,8 @@ int lm3533_ctrlbank_disable(struct lm3533_ctrlbank *cb)
 	dev_dbg(cb->dev, "%s - %d\n", __func__, cb->id);
 
 	mask = 1 << cb->id;
-	ret = lm3533_update(cb->lm3533, LM3533_REG_CTRLBANK_ENABLE, 0, mask);
+	ret = regmap_clear_bits(cb->lm3533->regmap, LM3533_REG_CTRLBANK_ENABLE,
+				mask);
 	if (ret)
 		dev_err(cb->dev, "failed to disable ctrlbank %d\n", cb->id);
 
@@ -68,7 +70,7 @@ EXPORT_SYMBOL_GPL(lm3533_ctrlbank_disable);
  *
  * imax		5000 - 29800 uA (800 uA step)
  */
-int lm3533_ctrlbank_set_max_current(struct lm3533_ctrlbank *cb, u16 imax)
+int lm3533_ctrlbank_set_max_current(struct lm3533_ctrlbank *cb, u32 imax)
 {
 	u8 reg;
 	u8 val;
@@ -80,7 +82,7 @@ int lm3533_ctrlbank_set_max_current(struct lm3533_ctrlbank *cb, u16 imax)
 	val = (imax - LM3533_MAX_CURRENT_MIN) / LM3533_MAX_CURRENT_STEP;
 
 	reg = lm3533_ctrlbank_get_reg(cb, LM3533_REG_MAX_CURRENT_BASE);
-	ret = lm3533_write(cb->lm3533, reg, val);
+	ret = regmap_write(cb->lm3533->regmap, reg, val);
 	if (ret)
 		dev_err(cb->dev, "failed to set max current\n");
 
@@ -88,13 +90,13 @@ int lm3533_ctrlbank_set_max_current(struct lm3533_ctrlbank *cb, u16 imax)
 }
 EXPORT_SYMBOL_GPL(lm3533_ctrlbank_set_max_current);
 
-int lm3533_ctrlbank_set_brightness(struct lm3533_ctrlbank *cb, u8 val)
+int lm3533_ctrlbank_set_brightness(struct lm3533_ctrlbank *cb, u32 val)
 {
 	u8 reg;
 	int ret;
 
 	reg = lm3533_ctrlbank_get_reg(cb, LM3533_REG_BRIGHTNESS_BASE);
-	ret = lm3533_write(cb->lm3533, reg, val);
+	ret = regmap_write(cb->lm3533->regmap, reg, val);
 	if (ret)
 		dev_err(cb->dev, "failed to set brightness\n");
 
@@ -102,13 +104,13 @@ int lm3533_ctrlbank_set_brightness(struct lm3533_ctrlbank *cb, u8 val)
 }
 EXPORT_SYMBOL_GPL(lm3533_ctrlbank_set_brightness);
 
-int lm3533_ctrlbank_get_brightness(struct lm3533_ctrlbank *cb, u8 *val)
+int lm3533_ctrlbank_get_brightness(struct lm3533_ctrlbank *cb, u32 *val)
 {
 	u8 reg;
 	int ret;
 
 	reg = lm3533_ctrlbank_get_reg(cb, LM3533_REG_BRIGHTNESS_BASE);
-	ret = lm3533_read(cb->lm3533, reg, val);
+	ret = regmap_read(cb->lm3533->regmap, reg, val);
 	if (ret)
 		dev_err(cb->dev, "failed to get brightness\n");
 
@@ -126,7 +128,7 @@ EXPORT_SYMBOL_GPL(lm3533_ctrlbank_get_brightness);
  *   bit 1 - PWM-input enabled in Zone 0
  *   bit 0 - PWM-input enabled
  */
-int lm3533_ctrlbank_set_pwm(struct lm3533_ctrlbank *cb, u8 val)
+int lm3533_ctrlbank_set_pwm(struct lm3533_ctrlbank *cb, u32 val)
 {
 	u8 reg;
 	int ret;
@@ -135,7 +137,7 @@ int lm3533_ctrlbank_set_pwm(struct lm3533_ctrlbank *cb, u8 val)
 		return -EINVAL;
 
 	reg = lm3533_ctrlbank_get_reg(cb, LM3533_REG_PWM_BASE);
-	ret = lm3533_write(cb->lm3533, reg, val);
+	ret = regmap_write(cb->lm3533->regmap, reg, val);
 	if (ret)
 		dev_err(cb->dev, "failed to set PWM mask\n");
 
@@ -143,13 +145,13 @@ int lm3533_ctrlbank_set_pwm(struct lm3533_ctrlbank *cb, u8 val)
 }
 EXPORT_SYMBOL_GPL(lm3533_ctrlbank_set_pwm);
 
-int lm3533_ctrlbank_get_pwm(struct lm3533_ctrlbank *cb, u8 *val)
+int lm3533_ctrlbank_get_pwm(struct lm3533_ctrlbank *cb, u32 *val)
 {
 	u8 reg;
 	int ret;
 
 	reg = lm3533_ctrlbank_get_reg(cb, LM3533_REG_PWM_BASE);
-	ret = lm3533_read(cb->lm3533, reg, val);
+	ret = regmap_read(cb->lm3533->regmap, reg, val);
 	if (ret)
 		dev_err(cb->dev, "failed to get PWM mask\n");
 
diff --git a/drivers/video/backlight/lm3533_bl.c b/drivers/video/backlight/lm3533_bl.c
index babfd3ceec86..cd21c64b6485 100644
--- a/drivers/video/backlight/lm3533_bl.c
+++ b/drivers/video/backlight/lm3533_bl.c
@@ -11,6 +11,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/backlight.h>
+#include <linux/regmap.h>
 #include <linux/slab.h>
 
 #include <linux/mfd/lm3533.h>
@@ -45,7 +46,7 @@ static int lm3533_bl_update_status(struct backlight_device *bd)
 static int lm3533_bl_get_brightness(struct backlight_device *bd)
 {
 	struct lm3533_bl *bl = bl_get_data(bd);
-	u8 val;
+	u32 val;
 	int ret;
 
 	ret = lm3533_ctrlbank_get_brightness(&bl->cb, &val);
@@ -82,12 +83,12 @@ static ssize_t show_als_en(struct device *dev,
 {
 	struct lm3533_bl *bl = dev_get_drvdata(dev);
 	int ctrlbank = lm3533_bl_get_ctrlbank_id(bl);
-	u8 val;
+	u32 val;
 	u8 mask;
 	bool enable;
 	int ret;
 
-	ret = lm3533_read(bl->lm3533, LM3533_REG_CTRLBANK_AB_BCONF, &val);
+	ret = regmap_read(bl->lm3533->regmap, LM3533_REG_CTRLBANK_AB_BCONF, &val);
 	if (ret)
 		return ret;
 
@@ -104,7 +105,6 @@ static ssize_t store_als_en(struct device *dev,
 	struct lm3533_bl *bl = dev_get_drvdata(dev);
 	int ctrlbank = lm3533_bl_get_ctrlbank_id(bl);
 	int enable;
-	u8 val;
 	u8 mask;
 	int ret;
 
@@ -113,13 +113,8 @@ static ssize_t store_als_en(struct device *dev,
 
 	mask = 1 << (2 * ctrlbank);
 
-	if (enable)
-		val = mask;
-	else
-		val = 0;
-
-	ret = lm3533_update(bl->lm3533, LM3533_REG_CTRLBANK_AB_BCONF, val,
-									mask);
+	ret = regmap_assign_bits(bl->lm3533->regmap, LM3533_REG_CTRLBANK_AB_BCONF,
+				 mask, enable);
 	if (ret)
 		return ret;
 
@@ -130,12 +125,12 @@ static ssize_t show_linear(struct device *dev,
 				struct device_attribute *attr, char *buf)
 {
 	struct lm3533_bl *bl = dev_get_drvdata(dev);
-	u8 val;
+	u32 val;
 	u8 mask;
 	int linear;
 	int ret;
 
-	ret = lm3533_read(bl->lm3533, LM3533_REG_CTRLBANK_AB_BCONF, &val);
+	ret = regmap_read(bl->lm3533->regmap, LM3533_REG_CTRLBANK_AB_BCONF, &val);
 	if (ret)
 		return ret;
 
@@ -156,7 +151,6 @@ static ssize_t store_linear(struct device *dev,
 	struct lm3533_bl *bl = dev_get_drvdata(dev);
 	unsigned long linear;
 	u8 mask;
-	u8 val;
 	int ret;
 
 	if (kstrtoul(buf, 0, &linear))
@@ -164,13 +158,8 @@ static ssize_t store_linear(struct device *dev,
 
 	mask = 1 << (2 * lm3533_bl_get_ctrlbank_id(bl) + 1);
 
-	if (linear)
-		val = mask;
-	else
-		val = 0;
-
-	ret = lm3533_update(bl->lm3533, LM3533_REG_CTRLBANK_AB_BCONF, val,
-									mask);
+	ret = regmap_assign_bits(bl->lm3533->regmap, LM3533_REG_CTRLBANK_AB_BCONF,
+				 mask, linear);
 	if (ret)
 		return ret;
 
@@ -182,7 +171,7 @@ static ssize_t show_pwm(struct device *dev,
 					char *buf)
 {
 	struct lm3533_bl *bl = dev_get_drvdata(dev);
-	u8 val;
+	u32 val;
 	int ret;
 
 	ret = lm3533_ctrlbank_get_pwm(&bl->cb, &val);
@@ -197,10 +186,10 @@ static ssize_t store_pwm(struct device *dev,
 					const char *buf, size_t len)
 {
 	struct lm3533_bl *bl = dev_get_drvdata(dev);
-	u8 val;
+	u32 val;
 	int ret;
 
-	if (kstrtou8(buf, 0, &val))
+	if (kstrtou32(buf, 0, &val))
 		return -EINVAL;
 
 	ret = lm3533_ctrlbank_set_pwm(&bl->cb, val);
diff --git a/include/linux/mfd/lm3533.h b/include/linux/mfd/lm3533.h
index 69059a7a2ce5..3463b164d0c1 100644
--- a/include/linux/mfd/lm3533.h
+++ b/include/linux/mfd/lm3533.h
@@ -85,15 +85,10 @@ struct lm3533_platform_data {
 extern int lm3533_ctrlbank_enable(struct lm3533_ctrlbank *cb);
 extern int lm3533_ctrlbank_disable(struct lm3533_ctrlbank *cb);
 
-extern int lm3533_ctrlbank_set_brightness(struct lm3533_ctrlbank *cb, u8 val);
-extern int lm3533_ctrlbank_get_brightness(struct lm3533_ctrlbank *cb, u8 *val);
-extern int lm3533_ctrlbank_set_max_current(struct lm3533_ctrlbank *cb,
-								u16 imax);
-extern int lm3533_ctrlbank_set_pwm(struct lm3533_ctrlbank *cb, u8 val);
-extern int lm3533_ctrlbank_get_pwm(struct lm3533_ctrlbank *cb, u8 *val);
-
-extern int lm3533_read(struct lm3533 *lm3533, u8 reg, u8 *val);
-extern int lm3533_write(struct lm3533 *lm3533, u8 reg, u8 val);
-extern int lm3533_update(struct lm3533 *lm3533, u8 reg, u8 val, u8 mask);
+extern int lm3533_ctrlbank_set_brightness(struct lm3533_ctrlbank *cb, u32 val);
+extern int lm3533_ctrlbank_get_brightness(struct lm3533_ctrlbank *cb, u32 *val);
+extern int lm3533_ctrlbank_set_max_current(struct lm3533_ctrlbank *cb, u32 imax);
+extern int lm3533_ctrlbank_set_pwm(struct lm3533_ctrlbank *cb, u32 val);
+extern int lm3533_ctrlbank_get_pwm(struct lm3533_ctrlbank *cb, u32 *val);
 
 #endif	/* __LINUX_MFD_LM3533_H */
-- 
2.53.0

[PATCH v5 03/14] mfd: lm3533: Remove extern from shared functions in the header

[Svyatoslav Ryhel]

Using 'extern' is not required, drop them.

Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
---
 include/linux/mfd/lm3533.h | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/include/linux/mfd/lm3533.h b/include/linux/mfd/lm3533.h
index 3463b164d0c1..c4c38876c09b 100644
--- a/include/linux/mfd/lm3533.h
+++ b/include/linux/mfd/lm3533.h
@@ -82,13 +82,13 @@ struct lm3533_platform_data {
 	int num_leds;
 };
 
-extern int lm3533_ctrlbank_enable(struct lm3533_ctrlbank *cb);
-extern int lm3533_ctrlbank_disable(struct lm3533_ctrlbank *cb);
-
-extern int lm3533_ctrlbank_set_brightness(struct lm3533_ctrlbank *cb, u32 val);
-extern int lm3533_ctrlbank_get_brightness(struct lm3533_ctrlbank *cb, u32 *val);
-extern int lm3533_ctrlbank_set_max_current(struct lm3533_ctrlbank *cb, u32 imax);
-extern int lm3533_ctrlbank_set_pwm(struct lm3533_ctrlbank *cb, u32 val);
-extern int lm3533_ctrlbank_get_pwm(struct lm3533_ctrlbank *cb, u32 *val);
+int lm3533_ctrlbank_enable(struct lm3533_ctrlbank *cb);
+int lm3533_ctrlbank_disable(struct lm3533_ctrlbank *cb);
+
+int lm3533_ctrlbank_set_brightness(struct lm3533_ctrlbank *cb, u32 val);
+int lm3533_ctrlbank_get_brightness(struct lm3533_ctrlbank *cb, u32 *val);
+int lm3533_ctrlbank_set_max_current(struct lm3533_ctrlbank *cb, u32 imax);
+int lm3533_ctrlbank_set_pwm(struct lm3533_ctrlbank *cb, u32 val);
+int lm3533_ctrlbank_get_pwm(struct lm3533_ctrlbank *cb, u32 *val);
 
 #endif	/* __LINUX_MFD_LM3533_H */
-- 
2.53.0

[PATCH v5 04/14] mfd: lm3533: Pass only regmap and light sensor presence to child devices

[Svyatoslav Ryhel]

Instead of passing the entire lm3533 core data structure, only pass the
regmap and the light sensor presence flag to child devices.

Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
---
 drivers/iio/light/lm3533-als.c      | 32 ++++++++++++++---------------
 drivers/leds/leds-lm3533.c          | 32 ++++++++++++++++-------------
 drivers/mfd/lm3533-ctrlbank.c       | 14 ++++++-------
 drivers/video/backlight/lm3533_bl.c | 19 +++++++++--------
 include/linux/mfd/lm3533.h          |  2 +-
 5 files changed, 53 insertions(+), 46 deletions(-)

diff --git a/drivers/iio/light/lm3533-als.c b/drivers/iio/light/lm3533-als.c
index 44b104c2d77f..a9af8e2b965f 100644
--- a/drivers/iio/light/lm3533-als.c
+++ b/drivers/iio/light/lm3533-als.c
@@ -49,7 +49,7 @@
 
 
 struct lm3533_als {
-	struct lm3533 *lm3533;
+	struct regmap *regmap;
 	struct platform_device *pdev;
 
 	unsigned long flags;
@@ -73,7 +73,7 @@ static int lm3533_als_get_adc(struct iio_dev *indio_dev, bool average,
 	else
 		reg = LM3533_REG_ALS_READ_ADC_RAW;
 
-	ret = regmap_read(als->lm3533->regmap, reg, &val);
+	ret = regmap_read(als->regmap, reg, &val);
 	if (ret) {
 		dev_err(&indio_dev->dev, "failed to read adc\n");
 		return ret;
@@ -90,7 +90,7 @@ static int _lm3533_als_get_zone(struct iio_dev *indio_dev, u8 *zone)
 	u32 val;
 	int ret;
 
-	ret = regmap_read(als->lm3533->regmap, LM3533_REG_ALS_ZONE_INFO, &val);
+	ret = regmap_read(als->regmap, LM3533_REG_ALS_ZONE_INFO, &val);
 	if (ret) {
 		dev_err(&indio_dev->dev, "failed to read zone\n");
 		return ret;
@@ -141,7 +141,7 @@ static int lm3533_als_get_target(struct iio_dev *indio_dev, unsigned channel,
 		return -EINVAL;
 
 	reg = lm3533_als_get_target_reg(channel, zone);
-	ret = regmap_read(als->lm3533->regmap, reg, val);
+	ret = regmap_read(als->regmap, reg, val);
 	if (ret)
 		dev_err(&indio_dev->dev, "failed to get target current\n");
 
@@ -162,7 +162,7 @@ static int lm3533_als_set_target(struct iio_dev *indio_dev, unsigned channel,
 		return -EINVAL;
 
 	reg = lm3533_als_get_target_reg(channel, zone);
-	ret = regmap_write(als->lm3533->regmap, reg, val);
+	ret = regmap_write(als->regmap, reg, val);
 	if (ret)
 		dev_err(&indio_dev->dev, "failed to set target current\n");
 
@@ -274,7 +274,7 @@ static int lm3533_als_set_int_mode(struct iio_dev *indio_dev, int enable)
 	struct lm3533_als *als = iio_priv(indio_dev);
 	int ret;
 
-	ret = regmap_assign_bits(als->lm3533->regmap, LM3533_REG_ALS_ZONE_INFO,
+	ret = regmap_assign_bits(als->regmap, LM3533_REG_ALS_ZONE_INFO,
 				 LM3533_ALS_INT_ENABLE_MASK, enable);
 	if (ret) {
 		dev_err(&indio_dev->dev, "failed to set int mode %d\n",
@@ -290,7 +290,7 @@ static int lm3533_als_get_int_mode(struct iio_dev *indio_dev, int *enable)
 	struct lm3533_als *als = iio_priv(indio_dev);
 	int ret;
 
-	ret = regmap_test_bits(als->lm3533->regmap, LM3533_REG_ALS_ZONE_INFO,
+	ret = regmap_test_bits(als->regmap, LM3533_REG_ALS_ZONE_INFO,
 			       LM3533_ALS_INT_ENABLE_MASK);
 	if (ret < 0) {
 		dev_err(&indio_dev->dev, "failed to get int mode\n");
@@ -320,7 +320,7 @@ static int lm3533_als_get_threshold(struct iio_dev *indio_dev, unsigned nr,
 		return -EINVAL;
 
 	reg = lm3533_als_get_threshold_reg(nr, raising);
-	ret = regmap_read(als->lm3533->regmap, reg, val);
+	ret = regmap_read(als->regmap, reg, val);
 	if (ret)
 		dev_err(&indio_dev->dev, "failed to get threshold\n");
 
@@ -342,7 +342,7 @@ static int lm3533_als_set_threshold(struct iio_dev *indio_dev, unsigned nr,
 	reg2 = lm3533_als_get_threshold_reg(nr, !raising);
 
 	mutex_lock(&als->thresh_mutex);
-	ret = regmap_read(als->lm3533->regmap, reg2, &val2);
+	ret = regmap_read(als->regmap, reg2, &val2);
 	if (ret) {
 		dev_err(&indio_dev->dev, "failed to get threshold\n");
 		goto out;
@@ -357,7 +357,7 @@ static int lm3533_als_set_threshold(struct iio_dev *indio_dev, unsigned nr,
 		goto out;
 	}
 
-	ret = regmap_write(als->lm3533->regmap, reg, val);
+	ret = regmap_write(als->regmap, reg, val);
 	if (ret) {
 		dev_err(&indio_dev->dev, "failed to set threshold\n");
 		goto out;
@@ -712,7 +712,7 @@ static int lm3533_als_set_input_mode(struct lm3533_als *als, bool pwm_mode)
 {
 	int ret;
 
-	ret = regmap_assign_bits(als->lm3533->regmap, LM3533_REG_ALS_CONF,
+	ret = regmap_assign_bits(als->regmap, LM3533_REG_ALS_CONF,
 				 LM3533_ALS_INPUT_MODE_MASK, pwm_mode);
 	if (ret) {
 		dev_err(&als->pdev->dev, "failed to set input mode %d\n",
@@ -732,7 +732,7 @@ static int lm3533_als_set_resistor(struct lm3533_als *als, u8 val)
 		return -EINVAL;
 	}
 
-	ret = regmap_write(als->lm3533->regmap, LM3533_REG_ALS_RESISTOR_SELECT,
+	ret = regmap_write(als->regmap, LM3533_REG_ALS_RESISTOR_SELECT,
 			   val);
 	if (ret) {
 		dev_err(&als->pdev->dev, "failed to set resistor\n");
@@ -766,7 +766,7 @@ static int lm3533_als_setup_irq(struct lm3533_als *als, void *dev)
 	int ret;
 
 	/* Make sure interrupts are disabled. */
-	ret = regmap_clear_bits(als->lm3533->regmap, LM3533_REG_ALS_ZONE_INFO,
+	ret = regmap_clear_bits(als->regmap, LM3533_REG_ALS_ZONE_INFO,
 				LM3533_ALS_INT_ENABLE_MASK);
 	if (ret) {
 		dev_err(&als->pdev->dev, "failed to disable interrupts\n");
@@ -789,7 +789,7 @@ static int lm3533_als_enable(struct lm3533_als *als)
 {
 	int ret;
 
-	ret = regmap_set_bits(als->lm3533->regmap, LM3533_REG_ALS_CONF,
+	ret = regmap_set_bits(als->regmap, LM3533_REG_ALS_CONF,
 			      LM3533_ALS_ENABLE_MASK);
 	if (ret)
 		dev_err(&als->pdev->dev, "failed to enable ALS\n");
@@ -801,7 +801,7 @@ static int lm3533_als_disable(struct lm3533_als *als)
 {
 	int ret;
 
-	ret = regmap_clear_bits(als->lm3533->regmap, LM3533_REG_ALS_CONF,
+	ret = regmap_clear_bits(als->regmap, LM3533_REG_ALS_CONF,
 				LM3533_ALS_ENABLE_MASK);
 	if (ret)
 		dev_err(&als->pdev->dev, "failed to disable ALS\n");
@@ -845,7 +845,7 @@ static int lm3533_als_probe(struct platform_device *pdev)
 	indio_dev->modes = INDIO_DIRECT_MODE;
 
 	als = iio_priv(indio_dev);
-	als->lm3533 = lm3533;
+	als->regmap = lm3533->regmap;
 	als->pdev = pdev;
 	als->irq = lm3533->irq;
 	atomic_set(&als->zone, 0);
diff --git a/drivers/leds/leds-lm3533.c b/drivers/leds/leds-lm3533.c
index 335c758071f3..0cb0585eb960 100644
--- a/drivers/leds/leds-lm3533.c
+++ b/drivers/leds/leds-lm3533.c
@@ -42,13 +42,15 @@
 
 
 struct lm3533_led {
-	struct lm3533 *lm3533;
+	struct regmap *regmap;
 	struct lm3533_ctrlbank cb;
 	struct led_classdev cdev;
 	int id;
 
 	struct mutex mutex;
 	unsigned long flags;
+
+	bool have_als;
 };
 
 
@@ -96,7 +98,7 @@ static int lm3533_led_pattern_enable(struct lm3533_led *led, int enable)
 	pattern = lm3533_led_get_pattern(led);
 	mask = 1 << (2 * pattern);
 
-	ret = regmap_assign_bits(led->lm3533->regmap,
+	ret = regmap_assign_bits(led->regmap,
 				 LM3533_REG_PATTERN_ENABLE, mask, enable);
 	if (ret) {
 		dev_err(led->cdev.dev, "failed to enable pattern %d (%d)\n",
@@ -255,7 +257,7 @@ static u8 lm3533_led_delay_set(struct lm3533_led *led, u8 base,
 	dev_dbg(led->cdev.dev, "%s - %lu: %u (0x%02x)\n", __func__,
 							*delay, t, val);
 	reg = lm3533_led_get_pattern_reg(led, base);
-	ret = regmap_write(led->lm3533->regmap, reg, val);
+	ret = regmap_write(led->regmap, reg, val);
 	if (ret)
 		dev_err(led->cdev.dev, "failed to set delay (%02x)\n", reg);
 
@@ -336,7 +338,7 @@ static ssize_t show_risefalltime(struct device *dev,
 	u32 val;
 
 	reg = lm3533_led_get_pattern_reg(led, base);
-	ret = regmap_read(led->lm3533->regmap, reg, &val);
+	ret = regmap_read(led->regmap, reg, &val);
 	if (ret)
 		return ret;
 
@@ -371,7 +373,7 @@ static ssize_t store_risefalltime(struct device *dev,
 		return -EINVAL;
 
 	reg = lm3533_led_get_pattern_reg(led, base);
-	ret = regmap_write(led->lm3533->regmap, reg, val);
+	ret = regmap_write(led->regmap, reg, val);
 	if (ret)
 		return ret;
 
@@ -405,7 +407,7 @@ static ssize_t show_als_channel(struct device *dev,
 	int ret;
 
 	reg = lm3533_led_get_lv_reg(led, LM3533_REG_CTRLBANK_BCONF_BASE);
-	ret = regmap_read(led->lm3533->regmap, reg, &val);
+	ret = regmap_read(led->regmap, reg, &val);
 	if (ret)
 		return ret;
 
@@ -437,7 +439,7 @@ static ssize_t store_als_channel(struct device *dev,
 	mask = LM3533_REG_CTRLBANK_BCONF_ALS_CHANNEL_MASK;
 	val = channel - 1;
 
-	ret = regmap_update_bits(led->lm3533->regmap, reg, mask, val);
+	ret = regmap_update_bits(led->regmap, reg, mask, val);
 	if (ret)
 		return ret;
 
@@ -455,7 +457,7 @@ static ssize_t show_als_en(struct device *dev,
 	int ret;
 
 	reg = lm3533_led_get_lv_reg(led, LM3533_REG_CTRLBANK_BCONF_BASE);
-	ret = regmap_read(led->lm3533->regmap, reg, &val);
+	ret = regmap_read(led->regmap, reg, &val);
 	if (ret)
 		return ret;
 
@@ -479,7 +481,7 @@ static ssize_t store_als_en(struct device *dev,
 
 	reg = lm3533_led_get_lv_reg(led, LM3533_REG_CTRLBANK_BCONF_BASE);
 
-	ret = regmap_assign_bits(led->lm3533->regmap, reg,
+	ret = regmap_assign_bits(led->regmap, reg,
 				 LM3533_REG_CTRLBANK_BCONF_ALS_EN_MASK, enable);
 	if (ret)
 		return ret;
@@ -498,7 +500,7 @@ static ssize_t show_linear(struct device *dev,
 	int ret;
 
 	reg = lm3533_led_get_lv_reg(led, LM3533_REG_CTRLBANK_BCONF_BASE);
-	ret = regmap_read(led->lm3533->regmap, reg, &val);
+	ret = regmap_read(led->regmap, reg, &val);
 	if (ret)
 		return ret;
 
@@ -525,7 +527,7 @@ static ssize_t store_linear(struct device *dev,
 
 	reg = lm3533_led_get_lv_reg(led, LM3533_REG_CTRLBANK_BCONF_BASE);
 
-	ret = regmap_assign_bits(led->lm3533->regmap, reg,
+	ret = regmap_assign_bits(led->regmap, reg,
 				 LM3533_REG_CTRLBANK_BCONF_MAPPING_MASK, linear);
 	if (ret)
 		return ret;
@@ -597,7 +599,7 @@ static umode_t lm3533_led_attr_is_visible(struct kobject *kobj,
 
 	if (attr == &dev_attr_als_channel.attr ||
 					attr == &dev_attr_als_en.attr) {
-		if (!led->lm3533->have_als)
+		if (!led->have_als)
 			mode = 0;
 	}
 
@@ -654,7 +656,9 @@ static int lm3533_led_probe(struct platform_device *pdev)
 	if (!led)
 		return -ENOMEM;
 
-	led->lm3533 = lm3533;
+	led->regmap = lm3533->regmap;
+	led->have_als = lm3533->have_als;
+
 	led->cdev.name = pdata->name;
 	led->cdev.default_trigger = pdata->default_trigger;
 	led->cdev.brightness_set_blocking = lm3533_led_set;
@@ -670,7 +674,7 @@ static int lm3533_led_probe(struct platform_device *pdev)
 	 * registration so use parent device (for error reporting) until
 	 * registered.
 	 */
-	led->cb.lm3533 = lm3533;
+	led->cb.regmap = lm3533->regmap;
 	led->cb.id = lm3533_led_get_ctrlbank_id(led);
 	led->cb.dev = lm3533->dev;
 
diff --git a/drivers/mfd/lm3533-ctrlbank.c b/drivers/mfd/lm3533-ctrlbank.c
index c2b5fd38b81d..91e13cfa3cf0 100644
--- a/drivers/mfd/lm3533-ctrlbank.c
+++ b/drivers/mfd/lm3533-ctrlbank.c
@@ -39,7 +39,7 @@ int lm3533_ctrlbank_enable(struct lm3533_ctrlbank *cb)
 	dev_dbg(cb->dev, "%s - %d\n", __func__, cb->id);
 
 	mask = 1 << cb->id;
-	ret = regmap_set_bits(cb->lm3533->regmap, LM3533_REG_CTRLBANK_ENABLE,
+	ret = regmap_set_bits(cb->regmap, LM3533_REG_CTRLBANK_ENABLE,
 			      mask);
 	if (ret)
 		dev_err(cb->dev, "failed to enable ctrlbank %d\n", cb->id);
@@ -56,7 +56,7 @@ int lm3533_ctrlbank_disable(struct lm3533_ctrlbank *cb)
 	dev_dbg(cb->dev, "%s - %d\n", __func__, cb->id);
 
 	mask = 1 << cb->id;
-	ret = regmap_clear_bits(cb->lm3533->regmap, LM3533_REG_CTRLBANK_ENABLE,
+	ret = regmap_clear_bits(cb->regmap, LM3533_REG_CTRLBANK_ENABLE,
 				mask);
 	if (ret)
 		dev_err(cb->dev, "failed to disable ctrlbank %d\n", cb->id);
@@ -82,7 +82,7 @@ int lm3533_ctrlbank_set_max_current(struct lm3533_ctrlbank *cb, u32 imax)
 	val = (imax - LM3533_MAX_CURRENT_MIN) / LM3533_MAX_CURRENT_STEP;
 
 	reg = lm3533_ctrlbank_get_reg(cb, LM3533_REG_MAX_CURRENT_BASE);
-	ret = regmap_write(cb->lm3533->regmap, reg, val);
+	ret = regmap_write(cb->regmap, reg, val);
 	if (ret)
 		dev_err(cb->dev, "failed to set max current\n");
 
@@ -96,7 +96,7 @@ int lm3533_ctrlbank_set_brightness(struct lm3533_ctrlbank *cb, u32 val)
 	int ret;
 
 	reg = lm3533_ctrlbank_get_reg(cb, LM3533_REG_BRIGHTNESS_BASE);
-	ret = regmap_write(cb->lm3533->regmap, reg, val);
+	ret = regmap_write(cb->regmap, reg, val);
 	if (ret)
 		dev_err(cb->dev, "failed to set brightness\n");
 
@@ -110,7 +110,7 @@ int lm3533_ctrlbank_get_brightness(struct lm3533_ctrlbank *cb, u32 *val)
 	int ret;
 
 	reg = lm3533_ctrlbank_get_reg(cb, LM3533_REG_BRIGHTNESS_BASE);
-	ret = regmap_read(cb->lm3533->regmap, reg, val);
+	ret = regmap_read(cb->regmap, reg, val);
 	if (ret)
 		dev_err(cb->dev, "failed to get brightness\n");
 
@@ -137,7 +137,7 @@ int lm3533_ctrlbank_set_pwm(struct lm3533_ctrlbank *cb, u32 val)
 		return -EINVAL;
 
 	reg = lm3533_ctrlbank_get_reg(cb, LM3533_REG_PWM_BASE);
-	ret = regmap_write(cb->lm3533->regmap, reg, val);
+	ret = regmap_write(cb->regmap, reg, val);
 	if (ret)
 		dev_err(cb->dev, "failed to set PWM mask\n");
 
@@ -151,7 +151,7 @@ int lm3533_ctrlbank_get_pwm(struct lm3533_ctrlbank *cb, u32 *val)
 	int ret;
 
 	reg = lm3533_ctrlbank_get_reg(cb, LM3533_REG_PWM_BASE);
-	ret = regmap_read(cb->lm3533->regmap, reg, val);
+	ret = regmap_read(cb->regmap, reg, val);
 	if (ret)
 		dev_err(cb->dev, "failed to get PWM mask\n");
 
diff --git a/drivers/video/backlight/lm3533_bl.c b/drivers/video/backlight/lm3533_bl.c
index cd21c64b6485..4d6f68033480 100644
--- a/drivers/video/backlight/lm3533_bl.c
+++ b/drivers/video/backlight/lm3533_bl.c
@@ -24,10 +24,12 @@
 
 
 struct lm3533_bl {
-	struct lm3533 *lm3533;
+	struct regmap *regmap;
 	struct lm3533_ctrlbank cb;
 	struct backlight_device *bd;
 	int id;
+
+	bool have_als;
 };
 
 
@@ -88,7 +90,7 @@ static ssize_t show_als_en(struct device *dev,
 	bool enable;
 	int ret;
 
-	ret = regmap_read(bl->lm3533->regmap, LM3533_REG_CTRLBANK_AB_BCONF, &val);
+	ret = regmap_read(bl->regmap, LM3533_REG_CTRLBANK_AB_BCONF, &val);
 	if (ret)
 		return ret;
 
@@ -113,7 +115,7 @@ static ssize_t store_als_en(struct device *dev,
 
 	mask = 1 << (2 * ctrlbank);
 
-	ret = regmap_assign_bits(bl->lm3533->regmap, LM3533_REG_CTRLBANK_AB_BCONF,
+	ret = regmap_assign_bits(bl->regmap, LM3533_REG_CTRLBANK_AB_BCONF,
 				 mask, enable);
 	if (ret)
 		return ret;
@@ -130,7 +132,7 @@ static ssize_t show_linear(struct device *dev,
 	int linear;
 	int ret;
 
-	ret = regmap_read(bl->lm3533->regmap, LM3533_REG_CTRLBANK_AB_BCONF, &val);
+	ret = regmap_read(bl->regmap, LM3533_REG_CTRLBANK_AB_BCONF, &val);
 	if (ret)
 		return ret;
 
@@ -158,7 +160,7 @@ static ssize_t store_linear(struct device *dev,
 
 	mask = 1 << (2 * lm3533_bl_get_ctrlbank_id(bl) + 1);
 
-	ret = regmap_assign_bits(bl->lm3533->regmap, LM3533_REG_CTRLBANK_AB_BCONF,
+	ret = regmap_assign_bits(bl->regmap, LM3533_REG_CTRLBANK_AB_BCONF,
 				 mask, linear);
 	if (ret)
 		return ret;
@@ -223,7 +225,7 @@ static umode_t lm3533_bl_attr_is_visible(struct kobject *kobj,
 
 	if (attr == &dev_attr_als_channel.attr ||
 					attr == &dev_attr_als_en.attr) {
-		if (!bl->lm3533->have_als)
+		if (!bl->have_als)
 			mode = 0;
 	}
 
@@ -277,10 +279,11 @@ static int lm3533_bl_probe(struct platform_device *pdev)
 	if (!bl)
 		return -ENOMEM;
 
-	bl->lm3533 = lm3533;
+	bl->regmap = lm3533->regmap;
+	bl->have_als = lm3533->have_als;
 	bl->id = pdev->id;
 
-	bl->cb.lm3533 = lm3533;
+	bl->cb.regmap = lm3533->regmap;
 	bl->cb.id = lm3533_bl_get_ctrlbank_id(bl);
 	bl->cb.dev = NULL;			/* until registered */
 
diff --git a/include/linux/mfd/lm3533.h b/include/linux/mfd/lm3533.h
index c4c38876c09b..74cfb52c3bd1 100644
--- a/include/linux/mfd/lm3533.h
+++ b/include/linux/mfd/lm3533.h
@@ -33,7 +33,7 @@ struct lm3533 {
 };
 
 struct lm3533_ctrlbank {
-	struct lm3533 *lm3533;
+	struct regmap *regmap;
 	struct device *dev;
 	int id;
 };
-- 
2.53.0

[PATCH v5 05/14] iio: light: lm3533-als: Remove redundant pdata helpers

[Svyatoslav Ryhel]

The lm3533_als_set_input_mode() and lm3533_als_set_resistor() functions
are used only in lm3533_als_setup(). Incorporate their code into
lm3533_als_setup() directly to simplify driver readability.

Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
---
 drivers/iio/light/lm3533-als.c | 56 ++++++++++------------------------
 1 file changed, 16 insertions(+), 40 deletions(-)

diff --git a/drivers/iio/light/lm3533-als.c b/drivers/iio/light/lm3533-als.c
index a9af8e2b965f..69bac1b202f1 100644
--- a/drivers/iio/light/lm3533-als.c
+++ b/drivers/iio/light/lm3533-als.c
@@ -708,55 +708,31 @@ static const struct attribute_group lm3533_als_attribute_group = {
 	.attrs = lm3533_als_attributes
 };
 
-static int lm3533_als_set_input_mode(struct lm3533_als *als, bool pwm_mode)
+static int lm3533_als_setup(struct lm3533_als *als,
+			    const struct lm3533_als_platform_data *pdata)
 {
+	struct device *dev = &als->pdev->dev;
 	int ret;
 
 	ret = regmap_assign_bits(als->regmap, LM3533_REG_ALS_CONF,
-				 LM3533_ALS_INPUT_MODE_MASK, pwm_mode);
-	if (ret) {
-		dev_err(&als->pdev->dev, "failed to set input mode %d\n",
-								pwm_mode);
-		return ret;
-	}
-
-	return 0;
-}
+				 LM3533_ALS_INPUT_MODE_MASK, pdata->pwm_mode);
+	if (ret)
+		return dev_err_probe(dev, ret, "failed to set input mode %d\n",
+				     pdata->pwm_mode);
 
-static int lm3533_als_set_resistor(struct lm3533_als *als, u8 val)
-{
-	int ret;
+	/* Bail out when in PWM-mode */
+	if (pdata->pwm_mode)
+		return 0;
 
-	if (val < LM3533_ALS_RESISTOR_MIN || val > LM3533_ALS_RESISTOR_MAX) {
-		dev_err(&als->pdev->dev, "invalid resistor value\n");
-		return -EINVAL;
-	}
+	if (pdata->r_select < LM3533_ALS_RESISTOR_MIN ||
+	    pdata->r_select > LM3533_ALS_RESISTOR_MAX)
+		return dev_err_probe(dev, -EINVAL,
+				     "invalid resistor value\n");
 
 	ret = regmap_write(als->regmap, LM3533_REG_ALS_RESISTOR_SELECT,
-			   val);
-	if (ret) {
-		dev_err(&als->pdev->dev, "failed to set resistor\n");
-		return ret;
-	}
-
-	return 0;
-}
-
-static int lm3533_als_setup(struct lm3533_als *als,
-			    const struct lm3533_als_platform_data *pdata)
-{
-	int ret;
-
-	ret = lm3533_als_set_input_mode(als, pdata->pwm_mode);
+			   pdata->r_select);
 	if (ret)
-		return ret;
-
-	/* ALS input is always high impedance in PWM-mode. */
-	if (!pdata->pwm_mode) {
-		ret = lm3533_als_set_resistor(als, pdata->r_select);
-		if (ret)
-			return ret;
-	}
+		return dev_err_probe(dev, ret, "failed to set resistor\n");
 
 	return 0;
 }
-- 
2.53.0

[PATCH v5 06/14] mfd: lm3533-core: Remove redundant pdata helpers

[Svyatoslav Ryhel]

The lm3533_set_boost_freq() and lm3533_set_boost_ovp() functions are used
only in lm3533_device_setup(), which in turn is only called by
lm3533_device_init(). Incorporate their code directly into
lm3533_device_init() to simplify driver readability.

Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
---
 drivers/mfd/lm3533-core.c | 57 ++++++++++-----------------------------
 1 file changed, 14 insertions(+), 43 deletions(-)

diff --git a/drivers/mfd/lm3533-core.c b/drivers/mfd/lm3533-core.c
index f9bdc0a1d9be..45e7f7481aa0 100644
--- a/drivers/mfd/lm3533-core.c
+++ b/drivers/mfd/lm3533-core.c
@@ -80,35 +80,6 @@ static struct mfd_cell lm3533_led_devs[] = {
 	},
 };
 
-static int lm3533_set_boost_freq(struct lm3533 *lm3533,
-						enum lm3533_boost_freq freq)
-{
-	int ret;
-
-	ret = regmap_update_bits(lm3533->regmap, LM3533_REG_BOOST_PWM,
-				 LM3533_BOOST_FREQ_MASK,
-				 freq << LM3533_BOOST_FREQ_SHIFT);
-	if (ret)
-		dev_err(lm3533->dev, "failed to set boost frequency\n");
-
-	return ret;
-}
-
-
-static int lm3533_set_boost_ovp(struct lm3533 *lm3533,
-						enum lm3533_boost_ovp ovp)
-{
-	int ret;
-
-	ret = regmap_update_bits(lm3533->regmap, LM3533_REG_BOOST_PWM,
-				 LM3533_BOOST_OVP_MASK,
-				 ovp << LM3533_BOOST_OVP_SHIFT);
-	if (ret)
-		dev_err(lm3533->dev, "failed to set boost ovp\n");
-
-	return ret;
-}
-
 /*
  * HVLED output config -- output hvled controlled by backlight bl
  */
@@ -406,18 +377,6 @@ static int lm3533_device_led_init(struct lm3533 *lm3533)
 	return 0;
 }
 
-static int lm3533_device_setup(struct lm3533 *lm3533,
-					struct lm3533_platform_data *pdata)
-{
-	int ret;
-
-	ret = lm3533_set_boost_freq(lm3533, pdata->boost_freq);
-	if (ret)
-		return ret;
-
-	return lm3533_set_boost_ovp(lm3533, pdata->boost_ovp);
-}
-
 static int lm3533_device_init(struct lm3533 *lm3533)
 {
 	struct lm3533_platform_data *pdata = dev_get_platdata(lm3533->dev);
@@ -437,9 +396,21 @@ static int lm3533_device_init(struct lm3533 *lm3533)
 
 	lm3533_enable(lm3533);
 
-	ret = lm3533_device_setup(lm3533, pdata);
-	if (ret)
+	ret = regmap_update_bits(lm3533->regmap, LM3533_REG_BOOST_PWM,
+				 LM3533_BOOST_FREQ_MASK,
+				 pdata->boost_freq << LM3533_BOOST_FREQ_SHIFT);
+	if (ret) {
+		dev_err(lm3533->dev, "failed to set boost frequency\n");
 		goto err_disable;
+	}
+
+	ret = regmap_update_bits(lm3533->regmap, LM3533_REG_BOOST_PWM,
+				 LM3533_BOOST_OVP_MASK,
+				 pdata->boost_ovp << LM3533_BOOST_OVP_SHIFT);
+	if (ret) {
+		dev_err(lm3533->dev, "failed to set boost ovp\n");
+		goto err_disable;
+	}
 
 	lm3533_device_als_init(lm3533);
 	lm3533_device_bl_init(lm3533);
-- 
2.53.0

[PATCH v5 07/14] mfd: lm3533: Use dev_groups in struct device_driver

[Svyatoslav Ryhel]

Instead of creating and removing the device sysfs attributes directly
during probe and remove of the driver, respectively, use dev_groups in
struct device_driver to point to the attribute definitions and let the
core take care of creating and removing them.

No intentional functional impact.

Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
---
 drivers/mfd/lm3533-core.c           | 16 ++++++----------
 drivers/video/backlight/lm3533_bl.c | 22 ++++++++--------------
 2 files changed, 14 insertions(+), 24 deletions(-)

diff --git a/drivers/mfd/lm3533-core.c b/drivers/mfd/lm3533-core.c
index 45e7f7481aa0..b03a3ae96c10 100644
--- a/drivers/mfd/lm3533-core.c
+++ b/drivers/mfd/lm3533-core.c
@@ -296,6 +296,11 @@ static struct attribute_group lm3533_attribute_group = {
 	.attrs		= lm3533_attributes
 };
 
+static const struct attribute_group *lm3533_attribute_groups[] = {
+	&lm3533_attribute_group,
+	NULL,
+};
+
 static int lm3533_device_als_init(struct lm3533 *lm3533)
 {
 	struct lm3533_platform_data *pdata = dev_get_platdata(lm3533->dev);
@@ -416,16 +421,8 @@ static int lm3533_device_init(struct lm3533 *lm3533)
 	lm3533_device_bl_init(lm3533);
 	lm3533_device_led_init(lm3533);
 
-	ret = sysfs_create_group(&lm3533->dev->kobj, &lm3533_attribute_group);
-	if (ret < 0) {
-		dev_err(lm3533->dev, "failed to create sysfs attributes\n");
-		goto err_unregister;
-	}
-
 	return 0;
 
-err_unregister:
-	mfd_remove_devices(lm3533->dev);
 err_disable:
 	lm3533_disable(lm3533);
 
@@ -436,8 +433,6 @@ static void lm3533_device_exit(struct lm3533 *lm3533)
 {
 	dev_dbg(lm3533->dev, "%s\n", __func__);
 
-	sysfs_remove_group(&lm3533->dev->kobj, &lm3533_attribute_group);
-
 	mfd_remove_devices(lm3533->dev);
 	lm3533_disable(lm3533);
 }
@@ -532,6 +527,7 @@ MODULE_DEVICE_TABLE(i2c, lm3533_i2c_ids);
 static struct i2c_driver lm3533_i2c_driver = {
 	.driver = {
 		   .name = "lm3533",
+		   .dev_groups = lm3533_attribute_groups,
 	},
 	.id_table	= lm3533_i2c_ids,
 	.probe		= lm3533_i2c_probe,
diff --git a/drivers/video/backlight/lm3533_bl.c b/drivers/video/backlight/lm3533_bl.c
index 4d6f68033480..9ef171d3aaea 100644
--- a/drivers/video/backlight/lm3533_bl.c
+++ b/drivers/video/backlight/lm3533_bl.c
@@ -237,6 +237,11 @@ static struct attribute_group lm3533_bl_attribute_group = {
 	.attrs		= lm3533_bl_attributes
 };
 
+static const struct attribute_group *lm3533_bl_attribute_groups[] = {
+	&lm3533_bl_attribute_group,
+	NULL,
+};
+
 static int lm3533_bl_setup(struct lm3533_bl *bl,
 					struct lm3533_bl_platform_data *pdata)
 {
@@ -304,28 +309,17 @@ static int lm3533_bl_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, bl);
 
-	ret = sysfs_create_group(&bd->dev.kobj, &lm3533_bl_attribute_group);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "failed to create sysfs attributes\n");
-		return ret;
-	}
-
 	backlight_update_status(bd);
 
 	ret = lm3533_bl_setup(bl, pdata);
 	if (ret)
-		goto err_sysfs_remove;
+		return ret;
 
 	ret = lm3533_ctrlbank_enable(&bl->cb);
 	if (ret)
-		goto err_sysfs_remove;
+		return ret;
 
 	return 0;
-
-err_sysfs_remove:
-	sysfs_remove_group(&bd->dev.kobj, &lm3533_bl_attribute_group);
-
-	return ret;
 }
 
 static void lm3533_bl_remove(struct platform_device *pdev)
@@ -339,7 +333,6 @@ static void lm3533_bl_remove(struct platform_device *pdev)
 	bd->props.brightness = 0;
 
 	lm3533_ctrlbank_disable(&bl->cb);
-	sysfs_remove_group(&bd->dev.kobj, &lm3533_bl_attribute_group);
 }
 
 #ifdef CONFIG_PM_SLEEP
@@ -377,6 +370,7 @@ static struct platform_driver lm3533_bl_driver = {
 	.driver = {
 		.name	= "lm3533-backlight",
 		.pm	= &lm3533_bl_pm_ops,
+		.dev_groups = lm3533_bl_attribute_groups,
 	},
 	.probe		= lm3533_bl_probe,
 	.remove		= lm3533_bl_remove,
-- 
2.53.0

[PATCH v5 08/14] mfd: lm3533: Convert to use OF bindings

[Svyatoslav Ryhel]

Since there are no users of this driver via platform data, remove the
platform data support and switch to using Device Tree bindings.

Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Daniel Thompson (RISCstar) <danielt@kernel.org> #for backlight
---
 drivers/iio/light/lm3533-als.c      |  67 +++++---
 drivers/leds/leds-lm3533.c          |  50 ++++--
 drivers/mfd/lm3533-core.c           | 236 ++++++++++++----------------
 drivers/mfd/lm3533-ctrlbank.c       |   5 -
 drivers/video/backlight/lm3533_bl.c |  55 +++++--
 include/linux/mfd/lm3533.h          |  52 +-----
 6 files changed, 220 insertions(+), 245 deletions(-)

diff --git a/drivers/iio/light/lm3533-als.c b/drivers/iio/light/lm3533-als.c
index 69bac1b202f1..80f8fa700263 100644
--- a/drivers/iio/light/lm3533-als.c
+++ b/drivers/iio/light/lm3533-als.c
@@ -16,16 +16,19 @@
 #include <linux/module.h>
 #include <linux/mutex.h>
 #include <linux/mfd/core.h>
+#include <linux/mod_devicetable.h>
 #include <linux/platform_device.h>
+#include <linux/property.h>
 #include <linux/regmap.h>
 #include <linux/slab.h>
 #include <linux/uaccess.h>
+#include <linux/units.h>
 
 #include <linux/mfd/lm3533.h>
 
 
-#define LM3533_ALS_RESISTOR_MIN			1
-#define LM3533_ALS_RESISTOR_MAX			127
+#define LM3533_ALS_RESISTOR_MIN_OHMS		1575
+#define LM3533_ALS_RESISTOR_MAX_OHMS		200000
 #define LM3533_ALS_CHANNEL_CURRENT_MAX		2
 #define LM3533_ALS_THRESH_MAX			3
 #define LM3533_ALS_ZONE_MAX			4
@@ -57,6 +60,9 @@ struct lm3533_als {
 
 	atomic_t zone;
 	struct mutex thresh_mutex;
+
+	u32 r_select;
+	bool pwm_mode;
 };
 
 
@@ -403,7 +409,7 @@ static ssize_t show_thresh_either_en(struct device *dev,
 	int enable;
 	int ret;
 
-	if (als->irq) {
+	if (als->irq > 0) {
 		ret = lm3533_als_get_int_mode(indio_dev, &enable);
 		if (ret)
 			return ret;
@@ -425,7 +431,7 @@ static ssize_t store_thresh_either_en(struct device *dev,
 	u8 zone;
 	int ret;
 
-	if (!als->irq)
+	if (als->irq <= 0)
 		return -EBUSY;
 
 	if (kstrtoul(buf, 0, &enable))
@@ -708,29 +714,38 @@ static const struct attribute_group lm3533_als_attribute_group = {
 	.attrs = lm3533_als_attributes
 };
 
-static int lm3533_als_setup(struct lm3533_als *als,
-			    const struct lm3533_als_platform_data *pdata)
+static int lm3533_als_setup(struct lm3533_als *als)
 {
 	struct device *dev = &als->pdev->dev;
 	int ret;
 
+	als->pwm_mode = device_property_read_bool(dev, "ti,pwm-mode");
+
 	ret = regmap_assign_bits(als->regmap, LM3533_REG_ALS_CONF,
-				 LM3533_ALS_INPUT_MODE_MASK, pdata->pwm_mode);
+				 LM3533_ALS_INPUT_MODE_MASK, als->pwm_mode);
 	if (ret)
 		return dev_err_probe(dev, ret, "failed to set input mode %d\n",
-				     pdata->pwm_mode);
+				     als->pwm_mode);
 
 	/* Bail out when in PWM-mode */
-	if (pdata->pwm_mode)
+	if (als->pwm_mode)
 		return 0;
 
-	if (pdata->r_select < LM3533_ALS_RESISTOR_MIN ||
-	    pdata->r_select > LM3533_ALS_RESISTOR_MAX)
+	ret = device_property_read_u32(dev, "ti,resistor-ohms",
+				       &als->r_select);
+	if (ret)
+		return dev_err_probe(dev, ret,
+				     "failed to ger resistor value\n");
+
+	if (als->r_select < LM3533_ALS_RESISTOR_MIN_OHMS ||
+	    als->r_select > LM3533_ALS_RESISTOR_MAX_OHMS)
 		return dev_err_probe(dev, -EINVAL,
 				     "invalid resistor value\n");
 
+	als->r_select = DIV_ROUND_UP(2 * MICRO, 10 * als->r_select);
+
 	ret = regmap_write(als->regmap, LM3533_REG_ALS_RESISTOR_SELECT,
-			   pdata->r_select);
+			   als->r_select);
 	if (ret)
 		return dev_err_probe(dev, ret, "failed to set resistor\n");
 
@@ -793,7 +808,6 @@ static const struct iio_info lm3533_als_info = {
 
 static int lm3533_als_probe(struct platform_device *pdev)
 {
-	const struct lm3533_als_platform_data *pdata;
 	struct lm3533 *lm3533;
 	struct lm3533_als *als;
 	struct iio_dev *indio_dev;
@@ -803,12 +817,6 @@ static int lm3533_als_probe(struct platform_device *pdev)
 	if (!lm3533)
 		return -EINVAL;
 
-	pdata = dev_get_platdata(&pdev->dev);
-	if (!pdata) {
-		dev_err(&pdev->dev, "no platform data\n");
-		return -EINVAL;
-	}
-
 	indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*als));
 	if (!indio_dev)
 		return -ENOMEM;
@@ -817,25 +825,27 @@ static int lm3533_als_probe(struct platform_device *pdev)
 	indio_dev->channels = lm3533_als_channels;
 	indio_dev->num_channels = ARRAY_SIZE(lm3533_als_channels);
 	indio_dev->name = dev_name(&pdev->dev);
-	iio_device_set_parent(indio_dev, pdev->dev.parent);
 	indio_dev->modes = INDIO_DIRECT_MODE;
 
 	als = iio_priv(indio_dev);
 	als->regmap = lm3533->regmap;
 	als->pdev = pdev;
-	als->irq = lm3533->irq;
+	als->irq = platform_get_irq_optional(pdev, 0);
+	if (als->irq == -EPROBE_DEFER)
+		return -EPROBE_DEFER;
+
 	atomic_set(&als->zone, 0);
 	mutex_init(&als->thresh_mutex);
 
 	platform_set_drvdata(pdev, indio_dev);
 
-	if (als->irq) {
+	if (als->irq > 0) {
 		ret = lm3533_als_setup_irq(als, indio_dev);
 		if (ret)
 			return ret;
 	}
 
-	ret = lm3533_als_setup(als, pdata);
+	ret = lm3533_als_setup(als);
 	if (ret)
 		goto err_free_irq;
 
@@ -854,7 +864,7 @@ static int lm3533_als_probe(struct platform_device *pdev)
 err_disable:
 	lm3533_als_disable(als);
 err_free_irq:
-	if (als->irq)
+	if (als->irq > 0)
 		free_irq(als->irq, indio_dev);
 
 	return ret;
@@ -868,13 +878,20 @@ static void lm3533_als_remove(struct platform_device *pdev)
 	lm3533_als_set_int_mode(indio_dev, false);
 	iio_device_unregister(indio_dev);
 	lm3533_als_disable(als);
-	if (als->irq)
+	if (als->irq > 0)
 		free_irq(als->irq, indio_dev);
 }
 
+static const struct of_device_id lm3533_als_match_table[] = {
+	{ .compatible = "ti,lm3533-als" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, lm3533_als_match_table);
+
 static struct platform_driver lm3533_als_driver = {
 	.driver	= {
 		.name	= "lm3533-als",
+		.of_match_table = lm3533_als_match_table,
 	},
 	.probe		= lm3533_als_probe,
 	.remove		= lm3533_als_remove,
diff --git a/drivers/leds/leds-lm3533.c b/drivers/leds/leds-lm3533.c
index 0cb0585eb960..ed810c23f30f 100644
--- a/drivers/leds/leds-lm3533.c
+++ b/drivers/leds/leds-lm3533.c
@@ -10,8 +10,10 @@
 #include <linux/module.h>
 #include <linux/leds.h>
 #include <linux/mfd/core.h>
+#include <linux/mod_devicetable.h>
 #include <linux/mutex.h>
 #include <linux/platform_device.h>
+#include <linux/property.h>
 #include <linux/regmap.h>
 #include <linux/slab.h>
 
@@ -50,6 +52,9 @@ struct lm3533_led {
 	struct mutex mutex;
 	unsigned long flags;
 
+	u32 max_current;
+	u32 pwm;
+
 	bool have_als;
 };
 
@@ -616,22 +621,20 @@ static const struct attribute_group *lm3533_led_attribute_groups[] = {
 	NULL
 };
 
-static int lm3533_led_setup(struct lm3533_led *led,
-					struct lm3533_led_platform_data *pdata)
+static int lm3533_led_setup(struct lm3533_led *led)
 {
 	int ret;
 
-	ret = lm3533_ctrlbank_set_max_current(&led->cb, pdata->max_current);
+	ret = lm3533_ctrlbank_set_max_current(&led->cb, led->max_current);
 	if (ret)
 		return ret;
 
-	return lm3533_ctrlbank_set_pwm(&led->cb, pdata->pwm);
+	return lm3533_ctrlbank_set_pwm(&led->cb, led->pwm);
 }
 
 static int lm3533_led_probe(struct platform_device *pdev)
 {
 	struct lm3533 *lm3533;
-	struct lm3533_led_platform_data *pdata;
 	struct lm3533_led *led;
 	int ret;
 
@@ -641,12 +644,6 @@ static int lm3533_led_probe(struct platform_device *pdev)
 	if (!lm3533)
 		return -EINVAL;
 
-	pdata = dev_get_platdata(&pdev->dev);
-	if (!pdata) {
-		dev_err(&pdev->dev, "no platform data\n");
-		return -EINVAL;
-	}
-
 	if (pdev->id < 0 || pdev->id >= LM3533_LVCTRLBANK_COUNT) {
 		dev_err(&pdev->dev, "illegal LED id %d\n", pdev->id);
 		return -EINVAL;
@@ -659,8 +656,6 @@ static int lm3533_led_probe(struct platform_device *pdev)
 	led->regmap = lm3533->regmap;
 	led->have_als = lm3533->have_als;
 
-	led->cdev.name = pdata->name;
-	led->cdev.default_trigger = pdata->default_trigger;
 	led->cdev.brightness_set_blocking = lm3533_led_set;
 	led->cdev.brightness_get = lm3533_led_get;
 	led->cdev.blink_set = lm3533_led_blink_set;
@@ -668,6 +663,15 @@ static int lm3533_led_probe(struct platform_device *pdev)
 	led->cdev.groups = lm3533_led_attribute_groups;
 	led->id = pdev->id;
 
+	led->cdev.name = devm_kasprintf(&pdev->dev, GFP_KERNEL, "%s-%d",
+					pdev->name, led->id);
+	if (!led->cdev.name)
+		return -ENOMEM;
+
+	led->cdev.default_trigger = "none";
+	device_property_read_string(&pdev->dev, "linux,default-trigger",
+				    &led->cdev.default_trigger);
+
 	mutex_init(&led->mutex);
 
 	/* The class framework makes a callback to get brightness during
@@ -680,15 +684,22 @@ static int lm3533_led_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, led);
 
-	ret = led_classdev_register(pdev->dev.parent, &led->cdev);
+	ret = led_classdev_register(&pdev->dev, &led->cdev);
 	if (ret) {
-		dev_err(&pdev->dev, "failed to register LED %d\n", pdev->id);
+		dev_err(&pdev->dev, "failed to register LED %d\n", led->id);
 		return ret;
 	}
 
 	led->cb.dev = led->cdev.dev;
 
-	ret = lm3533_led_setup(led, pdata);
+	device_property_read_u32(&pdev->dev, "led-max-microamp",
+				 &led->max_current);
+	led->max_current = clamp(led->max_current, LM3533_MAX_CURRENT_MIN,
+				 LM3533_MAX_CURRENT_MAX);
+
+	device_property_read_u32(&pdev->dev, "ti,pwm-config-mask", &led->pwm);
+
+	ret = lm3533_led_setup(led);
 	if (ret)
 		goto err_deregister;
 
@@ -725,9 +736,16 @@ static void lm3533_led_shutdown(struct platform_device *pdev)
 	lm3533_led_set(&led->cdev, LED_OFF);		/* disable blink */
 }
 
+static const struct of_device_id lm3533_led_match_table[] = {
+	{ .compatible = "ti,lm3533-leds" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, lm3533_led_match_table);
+
 static struct platform_driver lm3533_led_driver = {
 	.driver = {
 		.name = "lm3533-leds",
+		.of_match_table = lm3533_led_match_table,
 	},
 	.probe		= lm3533_led_probe,
 	.remove		= lm3533_led_remove,
diff --git a/drivers/mfd/lm3533-core.c b/drivers/mfd/lm3533-core.c
index b03a3ae96c10..a5aa7da9668b 100644
--- a/drivers/mfd/lm3533-core.c
+++ b/drivers/mfd/lm3533-core.c
@@ -14,19 +14,26 @@
 #include <linux/gpio/consumer.h>
 #include <linux/i2c.h>
 #include <linux/mfd/core.h>
+#include <linux/mod_devicetable.h>
+#include <linux/property.h>
 #include <linux/regmap.h>
 #include <linux/seq_file.h>
 #include <linux/slab.h>
 #include <linux/uaccess.h>
+#include <linux/units.h>
 
 #include <linux/mfd/lm3533.h>
 
 
 #define LM3533_BOOST_OVP_MASK		0x06
 #define LM3533_BOOST_OVP_SHIFT		1
+#define LM3533_BOOST_OVP_MIN		(16 * MICRO)
+#define LM3533_BOOST_OVP_MAX		(40 * MICRO)
 
 #define LM3533_BOOST_FREQ_MASK		0x01
 #define LM3533_BOOST_FREQ_SHIFT		0
+#define LM3533_BOOST_FREQ_MIN		(500 * HZ_PER_KHZ)
+#define LM3533_BOOST_FREQ_MAX		(1000 * HZ_PER_KHZ)
 
 #define LM3533_BL_ID_MASK		1
 #define LM3533_LED_ID_MASK		3
@@ -35,6 +42,7 @@
 
 #define LM3533_HVLED_ID_MAX		2
 #define LM3533_LVLED_ID_MAX		5
+#define LM3533_CELLS_MAX		7
 
 #define LM3533_REG_OUTPUT_CONF1		0x10
 #define LM3533_REG_OUTPUT_CONF2		0x11
@@ -42,44 +50,6 @@
 
 #define LM3533_REG_MAX			0xb2
 
-
-static struct mfd_cell lm3533_als_devs[] = {
-	{
-		.name	= "lm3533-als",
-		.id	= -1,
-	},
-};
-
-static struct mfd_cell lm3533_bl_devs[] = {
-	{
-		.name	= "lm3533-backlight",
-		.id	= 0,
-	},
-	{
-		.name	= "lm3533-backlight",
-		.id	= 1,
-	},
-};
-
-static struct mfd_cell lm3533_led_devs[] = {
-	{
-		.name	= "lm3533-leds",
-		.id	= 0,
-	},
-	{
-		.name	= "lm3533-leds",
-		.id	= 1,
-	},
-	{
-		.name	= "lm3533-leds",
-		.id	= 2,
-	},
-	{
-		.name	= "lm3533-leds",
-		.id	= 3,
-	},
-};
-
 /*
  * HVLED output config -- output hvled controlled by backlight bl
  */
@@ -301,125 +271,91 @@ static const struct attribute_group *lm3533_attribute_groups[] = {
 	NULL,
 };
 
-static int lm3533_device_als_init(struct lm3533 *lm3533)
-{
-	struct lm3533_platform_data *pdata = dev_get_platdata(lm3533->dev);
-	int ret;
-
-	if (!pdata->als)
-		return 0;
-
-	lm3533_als_devs[0].platform_data = pdata->als;
-	lm3533_als_devs[0].pdata_size = sizeof(*pdata->als);
-
-	ret = mfd_add_devices(lm3533->dev, 0, lm3533_als_devs, 1, NULL,
-			      0, NULL);
-	if (ret) {
-		dev_err(lm3533->dev, "failed to add ALS device\n");
-		return ret;
-	}
-
-	lm3533->have_als = 1;
-
-	return 0;
-}
-
-static int lm3533_device_bl_init(struct lm3533 *lm3533)
-{
-	struct lm3533_platform_data *pdata = dev_get_platdata(lm3533->dev);
-	int i;
-	int ret;
-
-	if (!pdata->backlights || pdata->num_backlights == 0)
-		return 0;
-
-	if (pdata->num_backlights > ARRAY_SIZE(lm3533_bl_devs))
-		pdata->num_backlights = ARRAY_SIZE(lm3533_bl_devs);
-
-	for (i = 0; i < pdata->num_backlights; ++i) {
-		lm3533_bl_devs[i].platform_data = &pdata->backlights[i];
-		lm3533_bl_devs[i].pdata_size = sizeof(pdata->backlights[i]);
-	}
-
-	ret = mfd_add_devices(lm3533->dev, 0, lm3533_bl_devs,
-			      pdata->num_backlights, NULL, 0, NULL);
-	if (ret) {
-		dev_err(lm3533->dev, "failed to add backlight devices\n");
-		return ret;
-	}
-
-	lm3533->have_backlights = 1;
-
-	return 0;
-}
-
-static int lm3533_device_led_init(struct lm3533 *lm3533)
-{
-	struct lm3533_platform_data *pdata = dev_get_platdata(lm3533->dev);
-	int i;
-	int ret;
-
-	if (!pdata->leds || pdata->num_leds == 0)
-		return 0;
-
-	if (pdata->num_leds > ARRAY_SIZE(lm3533_led_devs))
-		pdata->num_leds = ARRAY_SIZE(lm3533_led_devs);
-
-	for (i = 0; i < pdata->num_leds; ++i) {
-		lm3533_led_devs[i].platform_data = &pdata->leds[i];
-		lm3533_led_devs[i].pdata_size = sizeof(pdata->leds[i]);
-	}
-
-	ret = mfd_add_devices(lm3533->dev, 0, lm3533_led_devs,
-			      pdata->num_leds, NULL, 0, NULL);
-	if (ret) {
-		dev_err(lm3533->dev, "failed to add LED devices\n");
-		return ret;
-	}
-
-	lm3533->have_leds = 1;
-
-	return 0;
-}
-
 static int lm3533_device_init(struct lm3533 *lm3533)
 {
-	struct lm3533_platform_data *pdata = dev_get_platdata(lm3533->dev);
+	struct device *dev = lm3533->dev;
+	struct mfd_cell *lm3533_devices;
+	u32 count = 0, reg, nchilds;
 	int ret;
 
-	dev_dbg(lm3533->dev, "%s\n", __func__);
+	nchilds = device_get_child_node_count(dev);
+	if (!nchilds || nchilds > LM3533_CELLS_MAX)
+		return dev_err_probe(dev, -ENODEV,
+				     "num of child nodes is not supported\n");
 
-	if (!pdata) {
-		dev_err(lm3533->dev, "no platform data\n");
-		return -EINVAL;
-	}
+	lm3533_devices = devm_kcalloc(dev, nchilds, sizeof(*lm3533_devices),
+				      GFP_KERNEL);
+	if (!lm3533_devices)
+		return -ENOMEM;
 
-	lm3533->hwen = devm_gpiod_get(lm3533->dev, NULL, GPIOD_OUT_LOW);
-	if (IS_ERR(lm3533->hwen))
-		return dev_err_probe(lm3533->dev, PTR_ERR(lm3533->hwen), "failed to request HWEN GPIO\n");
-	gpiod_set_consumer_name(lm3533->hwen, "lm3533-hwen");
+	device_for_each_child_node_scoped(dev, child) {
+		if (count >= nchilds)
+			break;
+
+		if (fwnode_device_is_compatible(child, "ti,lm3533-als")) {
+			lm3533_devices[count].name = "lm3533-als";
+			lm3533_devices[count].of_compatible = "ti,lm3533-als";
+			lm3533_devices[count].id = PLATFORM_DEVID_NONE;
+
+			lm3533->have_als = true;
+			count++;
+		} else if (fwnode_device_is_compatible(child, "ti,lm3533-backlight")) {
+			ret = fwnode_property_read_u32(child, "reg", &reg);
+			if (ret || reg >= LM3533_HVLED_ID_MAX) {
+				dev_err(dev, "invalid backlight node %pfw\n", child);
+				continue;
+			}
+
+			lm3533_devices[count].name = "lm3533-backlight";
+			lm3533_devices[count].of_compatible = "ti,lm3533-backlight";
+			lm3533_devices[count].id = reg;
+			lm3533_devices[count].of_reg = reg;
+			lm3533_devices[count].use_of_reg = true;
+
+			lm3533->have_backlights = true;
+			count++;
+		} else if (fwnode_device_is_compatible(child, "ti,lm3533-leds")) {
+			ret = fwnode_property_read_u32(child, "reg", &reg);
+			if (ret || reg < LM3533_HVLED_ID_MAX ||
+			    reg > LM3533_LVLED_ID_MAX) {
+				dev_err(dev, "invalid LED node %pfw\n", child);
+				continue;
+			}
+
+			lm3533_devices[count].name = "lm3533-leds";
+			lm3533_devices[count].of_compatible = "ti,lm3533-leds";
+			lm3533_devices[count].id = reg - LM3533_HVLED_ID_MAX;
+			lm3533_devices[count].of_reg = reg;
+			lm3533_devices[count].use_of_reg = true;
+
+			lm3533->have_leds = true;
+			count++;
+		}
+	}
 
 	lm3533_enable(lm3533);
 
 	ret = regmap_update_bits(lm3533->regmap, LM3533_REG_BOOST_PWM,
 				 LM3533_BOOST_FREQ_MASK,
-				 pdata->boost_freq << LM3533_BOOST_FREQ_SHIFT);
+				 lm3533->boost_freq << LM3533_BOOST_FREQ_SHIFT);
 	if (ret) {
-		dev_err(lm3533->dev, "failed to set boost frequency\n");
+		dev_err(dev, "failed to set boost frequency\n");
 		goto err_disable;
 	}
 
 	ret = regmap_update_bits(lm3533->regmap, LM3533_REG_BOOST_PWM,
 				 LM3533_BOOST_OVP_MASK,
-				 pdata->boost_ovp << LM3533_BOOST_OVP_SHIFT);
+				 lm3533->boost_ovp << LM3533_BOOST_OVP_SHIFT);
 	if (ret) {
-		dev_err(lm3533->dev, "failed to set boost ovp\n");
+		dev_err(dev, "failed to set boost ovp\n");
 		goto err_disable;
 	}
 
-	lm3533_device_als_init(lm3533);
-	lm3533_device_bl_init(lm3533);
-	lm3533_device_led_init(lm3533);
+	ret = mfd_add_devices(dev, 0, lm3533_devices, count, NULL, 0, NULL);
+	if (ret) {
+		dev_err(dev, "failed to add MFD devices: %d\n", ret);
+		goto err_disable;
+	}
 
 	return 0;
 
@@ -504,7 +440,26 @@ static int lm3533_i2c_probe(struct i2c_client *i2c)
 		return PTR_ERR(lm3533->regmap);
 
 	lm3533->dev = &i2c->dev;
-	lm3533->irq = i2c->irq;
+
+	lm3533->hwen = devm_gpiod_get_optional(lm3533->dev, "enable",
+					       GPIOD_OUT_LOW);
+	if (IS_ERR(lm3533->hwen))
+		return dev_err_probe(lm3533->dev, PTR_ERR(lm3533->hwen),
+				     "failed to get HWEN GPIO\n");
+
+	device_property_read_u32(lm3533->dev, "ti,boost-ovp-microvolt",
+				 &lm3533->boost_ovp);
+
+	lm3533->boost_ovp = clamp(lm3533->boost_ovp, LM3533_BOOST_OVP_MIN,
+				  LM3533_BOOST_OVP_MAX);
+	lm3533->boost_ovp = lm3533->boost_ovp / (8 * MICRO) - 2;
+
+	device_property_read_u32(lm3533->dev, "ti,boost-freq-hz",
+				 &lm3533->boost_freq);
+
+	lm3533->boost_freq = clamp(lm3533->boost_freq, LM3533_BOOST_FREQ_MIN,
+				   LM3533_BOOST_FREQ_MAX);
+	lm3533->boost_freq = lm3533->boost_freq / (500 * KILO) - 1;
 
 	return lm3533_device_init(lm3533);
 }
@@ -518,6 +473,12 @@ static void lm3533_i2c_remove(struct i2c_client *i2c)
 	lm3533_device_exit(lm3533);
 }
 
+static const struct of_device_id lm3533_match_table[] = {
+	{ .compatible = "ti,lm3533" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, lm3533_match_table);
+
 static const struct i2c_device_id lm3533_i2c_ids[] = {
 	{ "lm3533" },
 	{ }
@@ -528,6 +489,7 @@ static struct i2c_driver lm3533_i2c_driver = {
 	.driver = {
 		   .name = "lm3533",
 		   .dev_groups = lm3533_attribute_groups,
+		   .of_match_table = lm3533_match_table,
 	},
 	.id_table	= lm3533_i2c_ids,
 	.probe		= lm3533_i2c_probe,
diff --git a/drivers/mfd/lm3533-ctrlbank.c b/drivers/mfd/lm3533-ctrlbank.c
index 91e13cfa3cf0..3aab8ece4e8c 100644
--- a/drivers/mfd/lm3533-ctrlbank.c
+++ b/drivers/mfd/lm3533-ctrlbank.c
@@ -13,11 +13,6 @@
 
 #include <linux/mfd/lm3533.h>
 
-
-#define LM3533_MAX_CURRENT_MIN		5000
-#define LM3533_MAX_CURRENT_MAX		29800
-#define LM3533_MAX_CURRENT_STEP		800
-
 #define LM3533_PWM_MAX			0x3f
 
 #define LM3533_REG_PWM_BASE		0x14
diff --git a/drivers/video/backlight/lm3533_bl.c b/drivers/video/backlight/lm3533_bl.c
index 9ef171d3aaea..2c24647fc17a 100644
--- a/drivers/video/backlight/lm3533_bl.c
+++ b/drivers/video/backlight/lm3533_bl.c
@@ -9,7 +9,9 @@
 
 #include <linux/module.h>
 #include <linux/init.h>
+#include <linux/mod_devicetable.h>
 #include <linux/platform_device.h>
+#include <linux/property.h>
 #include <linux/backlight.h>
 #include <linux/regmap.h>
 #include <linux/slab.h>
@@ -29,6 +31,9 @@ struct lm3533_bl {
 	struct backlight_device *bd;
 	int id;
 
+	u32 max_current;
+	u32 pwm;
+
 	bool have_als;
 };
 
@@ -242,25 +247,25 @@ static const struct attribute_group *lm3533_bl_attribute_groups[] = {
 	NULL,
 };
 
-static int lm3533_bl_setup(struct lm3533_bl *bl,
-					struct lm3533_bl_platform_data *pdata)
+static int lm3533_bl_setup(struct lm3533_bl *bl)
 {
 	int ret;
 
-	ret = lm3533_ctrlbank_set_max_current(&bl->cb, pdata->max_current);
+	ret = lm3533_ctrlbank_set_max_current(&bl->cb, bl->max_current);
 	if (ret)
 		return ret;
 
-	return lm3533_ctrlbank_set_pwm(&bl->cb, pdata->pwm);
+	return lm3533_ctrlbank_set_pwm(&bl->cb, bl->pwm);
 }
 
 static int lm3533_bl_probe(struct platform_device *pdev)
 {
 	struct lm3533 *lm3533;
-	struct lm3533_bl_platform_data *pdata;
 	struct lm3533_bl *bl;
 	struct backlight_device *bd;
 	struct backlight_properties props;
+	char *name = NULL;
+	u32 default_brightness = LM3533_BL_MAX_BRIGHTNESS;
 	int ret;
 
 	dev_dbg(&pdev->dev, "%s\n", __func__);
@@ -269,12 +274,6 @@ static int lm3533_bl_probe(struct platform_device *pdev)
 	if (!lm3533)
 		return -EINVAL;
 
-	pdata = dev_get_platdata(&pdev->dev);
-	if (!pdata) {
-		dev_err(&pdev->dev, "no platform data\n");
-		return -EINVAL;
-	}
-
 	if (pdev->id < 0 || pdev->id >= LM3533_HVCTRLBANK_COUNT) {
 		dev_err(&pdev->dev, "illegal backlight id %d\n", pdev->id);
 		return -EINVAL;
@@ -292,13 +291,21 @@ static int lm3533_bl_probe(struct platform_device *pdev)
 	bl->cb.id = lm3533_bl_get_ctrlbank_id(bl);
 	bl->cb.dev = NULL;			/* until registered */
 
+	name = devm_kasprintf(&pdev->dev, GFP_KERNEL, "%s-%d",
+			      pdev->name, pdev->id);
+	if (!name)
+		return -ENOMEM;
+
+	device_property_read_u32(&pdev->dev, "default-brightness",
+				 &default_brightness);
+
 	memset(&props, 0, sizeof(props));
 	props.type = BACKLIGHT_RAW;
 	props.max_brightness = LM3533_BL_MAX_BRIGHTNESS;
-	props.brightness = pdata->default_brightness;
-	bd = devm_backlight_device_register(&pdev->dev, pdata->name,
-					pdev->dev.parent, bl, &lm3533_bl_ops,
-					&props);
+	props.brightness = default_brightness;
+
+	bd = devm_backlight_device_register(&pdev->dev, name, &pdev->dev,
+					    bl, &lm3533_bl_ops, &props);
 	if (IS_ERR(bd)) {
 		dev_err(&pdev->dev, "failed to register backlight device\n");
 		return PTR_ERR(bd);
@@ -309,12 +316,19 @@ static int lm3533_bl_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, bl);
 
-	backlight_update_status(bd);
+	device_property_read_u32(&pdev->dev, "led-max-microamp",
+				 &bl->max_current);
+	bl->max_current = clamp(bl->max_current, LM3533_MAX_CURRENT_MIN,
+				LM3533_MAX_CURRENT_MAX);
 
-	ret = lm3533_bl_setup(bl, pdata);
+	device_property_read_u32(&pdev->dev, "ti,pwm-config-mask", &bl->pwm);
+
+	ret = lm3533_bl_setup(bl);
 	if (ret)
 		return ret;
 
+	backlight_update_status(bd);
+
 	ret = lm3533_ctrlbank_enable(&bl->cb);
 	if (ret)
 		return ret;
@@ -366,11 +380,18 @@ static void lm3533_bl_shutdown(struct platform_device *pdev)
 	lm3533_ctrlbank_disable(&bl->cb);
 }
 
+static const struct of_device_id lm3533_bl_match_table[] = {
+	{ .compatible = "ti,lm3533-backlight" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, lm3533_bl_match_table);
+
 static struct platform_driver lm3533_bl_driver = {
 	.driver = {
 		.name	= "lm3533-backlight",
 		.pm	= &lm3533_bl_pm_ops,
 		.dev_groups = lm3533_bl_attribute_groups,
+		.of_match_table = lm3533_bl_match_table,
 	},
 	.probe		= lm3533_bl_probe,
 	.remove		= lm3533_bl_remove,
diff --git a/include/linux/mfd/lm3533.h b/include/linux/mfd/lm3533.h
index 74cfb52c3bd1..5710e88da45d 100644
--- a/include/linux/mfd/lm3533.h
+++ b/include/linux/mfd/lm3533.h
@@ -15,6 +15,10 @@
 #define LM3533_ATTR_RW(_name) \
 	DEVICE_ATTR(_name, S_IRUGO | S_IWUSR , show_##_name, store_##_name)
 
+#define LM3533_MAX_CURRENT_MIN		5000
+#define LM3533_MAX_CURRENT_MAX		29800
+#define LM3533_MAX_CURRENT_STEP		800
+
 struct device;
 struct gpio_desc;
 struct regmap;
@@ -25,7 +29,9 @@ struct lm3533 {
 	struct regmap *regmap;
 
 	struct gpio_desc *hwen;
-	int irq;
+
+	u32 boost_ovp;
+	u32 boost_freq;
 
 	unsigned have_als:1;
 	unsigned have_backlights:1;
@@ -38,50 +44,6 @@ struct lm3533_ctrlbank {
 	int id;
 };
 
-struct lm3533_als_platform_data {
-	unsigned pwm_mode:1;		/* PWM input mode (default analog) */
-	u8 r_select;			/* 1 - 127 (ignored in PWM-mode) */
-};
-
-struct lm3533_bl_platform_data {
-	char *name;
-	u16 max_current;		/* 5000 - 29800 uA (800 uA step) */
-	u8 default_brightness;		/* 0 - 255 */
-	u8 pwm;				/* 0 - 0x3f */
-};
-
-struct lm3533_led_platform_data {
-	char *name;
-	const char *default_trigger;
-	u16 max_current;		/* 5000 - 29800 uA (800 uA step) */
-	u8 pwm;				/* 0 - 0x3f */
-};
-
-enum lm3533_boost_freq {
-	LM3533_BOOST_FREQ_500KHZ,
-	LM3533_BOOST_FREQ_1000KHZ,
-};
-
-enum lm3533_boost_ovp {
-	LM3533_BOOST_OVP_16V,
-	LM3533_BOOST_OVP_24V,
-	LM3533_BOOST_OVP_32V,
-	LM3533_BOOST_OVP_40V,
-};
-
-struct lm3533_platform_data {
-	enum lm3533_boost_ovp boost_ovp;
-	enum lm3533_boost_freq boost_freq;
-
-	struct lm3533_als_platform_data *als;
-
-	struct lm3533_bl_platform_data *backlights;
-	int num_backlights;
-
-	struct lm3533_led_platform_data *leds;
-	int num_leds;
-};
-
 int lm3533_ctrlbank_enable(struct lm3533_ctrlbank *cb);
 int lm3533_ctrlbank_disable(struct lm3533_ctrlbank *cb);
 
-- 
2.53.0

[PATCH v5 09/14] mfd: lm3533: Add support for VIN power supply

[Svyatoslav Ryhel]

Add support for 2.7V-5.5V VIN power supply.

Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
---
 drivers/mfd/lm3533-core.c  | 23 +++++++++++++++++++++--
 include/linux/mfd/lm3533.h |  2 ++
 2 files changed, 23 insertions(+), 2 deletions(-)

diff --git a/drivers/mfd/lm3533-core.c b/drivers/mfd/lm3533-core.c
index a5aa7da9668b..4b5d94e9ed27 100644
--- a/drivers/mfd/lm3533-core.c
+++ b/drivers/mfd/lm3533-core.c
@@ -17,6 +17,7 @@
 #include <linux/mod_devicetable.h>
 #include <linux/property.h>
 #include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
 #include <linux/seq_file.h>
 #include <linux/slab.h>
 #include <linux/uaccess.h>
@@ -113,14 +114,25 @@ static int lm3533_set_lvled_config(struct lm3533 *lm3533, u8 lvled, u8 led)
 	return ret;
 }
 
-static void lm3533_enable(struct lm3533 *lm3533)
+static int lm3533_enable(struct lm3533 *lm3533)
 {
+	int ret;
+
+	ret = regulator_enable(lm3533->vin_supply);
+	if (ret) {
+		dev_err(lm3533->dev, "failed to enable vin power supply\n");
+		return ret;
+	}
+
 	gpiod_set_value(lm3533->hwen, 1);
+
+	return 0;
 }
 
 static void lm3533_disable(struct lm3533 *lm3533)
 {
 	gpiod_set_value(lm3533->hwen, 0);
+	regulator_disable(lm3533->vin_supply);
 }
 
 enum lm3533_attribute_type {
@@ -333,7 +345,9 @@ static int lm3533_device_init(struct lm3533 *lm3533)
 		}
 	}
 
-	lm3533_enable(lm3533);
+	ret = lm3533_enable(lm3533);
+	if (ret)
+		return ret;
 
 	ret = regmap_update_bits(lm3533->regmap, LM3533_REG_BOOST_PWM,
 				 LM3533_BOOST_FREQ_MASK,
@@ -447,6 +461,11 @@ static int lm3533_i2c_probe(struct i2c_client *i2c)
 		return dev_err_probe(lm3533->dev, PTR_ERR(lm3533->hwen),
 				     "failed to get HWEN GPIO\n");
 
+	lm3533->vin_supply = devm_regulator_get(lm3533->dev, "vin");
+	if (IS_ERR(lm3533->vin_supply))
+		return dev_err_probe(lm3533->dev, PTR_ERR(lm3533->vin_supply),
+				     "failed to get vin-supply\n");
+
 	device_property_read_u32(lm3533->dev, "ti,boost-ovp-microvolt",
 				 &lm3533->boost_ovp);
 
diff --git a/include/linux/mfd/lm3533.h b/include/linux/mfd/lm3533.h
index 5710e88da45d..8f72dd41e8f0 100644
--- a/include/linux/mfd/lm3533.h
+++ b/include/linux/mfd/lm3533.h
@@ -22,6 +22,7 @@
 struct device;
 struct gpio_desc;
 struct regmap;
+struct regulator;
 
 struct lm3533 {
 	struct device *dev;
@@ -29,6 +30,7 @@ struct lm3533 {
 	struct regmap *regmap;
 
 	struct gpio_desc *hwen;
+	struct regulator *vin_supply;
 
 	u32 boost_ovp;
 	u32 boost_freq;
-- 
2.53.0

[PATCH v5 10/14] mfd: lm3533: Set DMA mask

[Svyatoslav Ryhel]

Missing coherent_dma_mask assigning triggers the following warning in
dmesg:

[    3.287872] platform lm3533-backlight.0: DMA mask not set

Since this warning might be elevated to an error in the future, set
coherent_dma_mask to zero because both the core and cells do not utilize
DMA.

Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
---
 drivers/mfd/lm3533-core.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/mfd/lm3533-core.c b/drivers/mfd/lm3533-core.c
index 4b5d94e9ed27..db8581d1b073 100644
--- a/drivers/mfd/lm3533-core.c
+++ b/drivers/mfd/lm3533-core.c
@@ -480,6 +480,10 @@ static int lm3533_i2c_probe(struct i2c_client *i2c)
 				   LM3533_BOOST_FREQ_MAX);
 	lm3533->boost_freq = lm3533->boost_freq / (500 * KILO) - 1;
 
+	/* LM3533 and child devices do not use DMA */
+	i2c->dev.coherent_dma_mask = 0;
+	i2c->dev.dma_mask = &i2c->dev.coherent_dma_mask;
+
 	return lm3533_device_init(lm3533);
 }
 
-- 
2.53.0

[PATCH v5 11/14] video: backlight: lm3533_bl: Improve logic of sysfs functions

[Svyatoslav Ryhel]

Simplify the sysfs logic of properties by switching to macros and proper
regmap helpers.

Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Daniel Thompson (RISCstar) <danielt@kernel.org>
---
 drivers/video/backlight/lm3533_bl.c | 62 ++++++++++-------------------
 1 file changed, 22 insertions(+), 40 deletions(-)

diff --git a/drivers/video/backlight/lm3533_bl.c b/drivers/video/backlight/lm3533_bl.c
index 2c24647fc17a..9eb0db640948 100644
--- a/drivers/video/backlight/lm3533_bl.c
+++ b/drivers/video/backlight/lm3533_bl.c
@@ -23,6 +23,8 @@
 #define LM3533_BL_MAX_BRIGHTNESS	255
 
 #define LM3533_REG_CTRLBANK_AB_BCONF	0x1a
+#define   CTRLBANK_AB_BCONF_ALS(n)	BIT(2 * (n))
+#define   CTRLBANK_AB_BCONF_MODE(n)	BIT(2 * (n) + 1)
 
 
 struct lm3533_bl {
@@ -85,88 +87,68 @@ static ssize_t show_als_channel(struct device *dev,
 	return scnprintf(buf, PAGE_SIZE, "%u\n", channel);
 }
 
-static ssize_t show_als_en(struct device *dev,
-				struct device_attribute *attr, char *buf)
+static ssize_t show_als_en(struct device *dev, struct device_attribute *attr,
+			   char *buf)
 {
 	struct lm3533_bl *bl = dev_get_drvdata(dev);
 	int ctrlbank = lm3533_bl_get_ctrlbank_id(bl);
-	u32 val;
-	u8 mask;
-	bool enable;
 	int ret;
 
-	ret = regmap_read(bl->regmap, LM3533_REG_CTRLBANK_AB_BCONF, &val);
-	if (ret)
+	ret = regmap_test_bits(bl->regmap, LM3533_REG_CTRLBANK_AB_BCONF,
+			       CTRLBANK_AB_BCONF_ALS(ctrlbank));
+	if (ret < 0)
 		return ret;
 
-	mask = 1 << (2 * ctrlbank);
-	enable = val & mask;
-
-	return scnprintf(buf, PAGE_SIZE, "%d\n", enable);
+	return scnprintf(buf, PAGE_SIZE, "%d\n", ret);
 }
 
-static ssize_t store_als_en(struct device *dev,
-					struct device_attribute *attr,
-					const char *buf, size_t len)
+static ssize_t store_als_en(struct device *dev, struct device_attribute *attr,
+			    const char *buf, size_t len)
 {
 	struct lm3533_bl *bl = dev_get_drvdata(dev);
 	int ctrlbank = lm3533_bl_get_ctrlbank_id(bl);
 	int enable;
-	u8 mask;
 	int ret;
 
 	if (kstrtoint(buf, 0, &enable))
 		return -EINVAL;
 
-	mask = 1 << (2 * ctrlbank);
-
 	ret = regmap_assign_bits(bl->regmap, LM3533_REG_CTRLBANK_AB_BCONF,
-				 mask, enable);
+				 CTRLBANK_AB_BCONF_ALS(ctrlbank), enable);
 	if (ret)
 		return ret;
 
 	return len;
 }
 
-static ssize_t show_linear(struct device *dev,
-				struct device_attribute *attr, char *buf)
+static ssize_t show_linear(struct device *dev, struct device_attribute *attr,
+			   char *buf)
 {
 	struct lm3533_bl *bl = dev_get_drvdata(dev);
-	u32 val;
-	u8 mask;
-	int linear;
+	int ctrlbank = lm3533_bl_get_ctrlbank_id(bl);
 	int ret;
 
-	ret = regmap_read(bl->regmap, LM3533_REG_CTRLBANK_AB_BCONF, &val);
-	if (ret)
+	ret = regmap_test_bits(bl->regmap, LM3533_REG_CTRLBANK_AB_BCONF,
+			       CTRLBANK_AB_BCONF_MODE(ctrlbank));
+	if (ret < 0)
 		return ret;
 
-	mask = 1 << (2 * lm3533_bl_get_ctrlbank_id(bl) + 1);
-
-	if (val & mask)
-		linear = 1;
-	else
-		linear = 0;
-
-	return scnprintf(buf, PAGE_SIZE, "%x\n", linear);
+	return scnprintf(buf, PAGE_SIZE, "%x\n", ret);
 }
 
-static ssize_t store_linear(struct device *dev,
-					struct device_attribute *attr,
-					const char *buf, size_t len)
+static ssize_t store_linear(struct device *dev, struct device_attribute *attr,
+			    const char *buf, size_t len)
 {
 	struct lm3533_bl *bl = dev_get_drvdata(dev);
+	int ctrlbank = lm3533_bl_get_ctrlbank_id(bl);
 	unsigned long linear;
-	u8 mask;
 	int ret;
 
 	if (kstrtoul(buf, 0, &linear))
 		return -EINVAL;
 
-	mask = 1 << (2 * lm3533_bl_get_ctrlbank_id(bl) + 1);
-
 	ret = regmap_assign_bits(bl->regmap, LM3533_REG_CTRLBANK_AB_BCONF,
-				 mask, linear);
+				 CTRLBANK_AB_BCONF_MODE(ctrlbank), linear);
 	if (ret)
 		return ret;
 
-- 
2.53.0

[PATCH v5 12/14] video: backlight: lm3533_bl: Set initial mapping mode from DT

[Svyatoslav Ryhel]

Add support to obtain the initial mapping mode from DT instead of leaving
it unconfigured.

Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Daniel Thompson (RISCstar) <danielt@kernel.org>
---
 drivers/video/backlight/lm3533_bl.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/drivers/video/backlight/lm3533_bl.c b/drivers/video/backlight/lm3533_bl.c
index 9eb0db640948..d003d5802508 100644
--- a/drivers/video/backlight/lm3533_bl.c
+++ b/drivers/video/backlight/lm3533_bl.c
@@ -37,6 +37,7 @@ struct lm3533_bl {
 	u32 pwm;
 
 	bool have_als;
+	bool linear;
 };
 
 
@@ -231,8 +232,14 @@ static const struct attribute_group *lm3533_bl_attribute_groups[] = {
 
 static int lm3533_bl_setup(struct lm3533_bl *bl)
 {
+	int ctrlbank = lm3533_bl_get_ctrlbank_id(bl);
 	int ret;
 
+	ret = regmap_assign_bits(bl->regmap, LM3533_REG_CTRLBANK_AB_BCONF,
+				 CTRLBANK_AB_BCONF_MODE(ctrlbank), bl->linear);
+	if (ret)
+		return ret;
+
 	ret = lm3533_ctrlbank_set_max_current(&bl->cb, bl->max_current);
 	if (ret)
 		return ret;
@@ -286,6 +293,9 @@ static int lm3533_bl_probe(struct platform_device *pdev)
 	props.max_brightness = LM3533_BL_MAX_BRIGHTNESS;
 	props.brightness = default_brightness;
 
+	bl->linear = device_property_read_bool(&pdev->dev,
+					       "ti,linear-mapping-mode");
+
 	bd = devm_backlight_device_register(&pdev->dev, name, &pdev->dev,
 					    bl, &lm3533_bl_ops, &props);
 	if (IS_ERR(bd)) {
-- 
2.53.0

[PATCH v5 13/14] video: backlight: lm3533_bl: Implement backlight_scale property

[Svyatoslav Ryhel]

Since the device supports linear and non-linear modes, implement the
backlight_scale property to describe this state.

Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Daniel Thompson (RISCstar) <danielt@kernel.org>
---
 drivers/video/backlight/lm3533_bl.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/video/backlight/lm3533_bl.c b/drivers/video/backlight/lm3533_bl.c
index d003d5802508..c99fc68cb669 100644
--- a/drivers/video/backlight/lm3533_bl.c
+++ b/drivers/video/backlight/lm3533_bl.c
@@ -142,6 +142,7 @@ static ssize_t store_linear(struct device *dev, struct device_attribute *attr,
 {
 	struct lm3533_bl *bl = dev_get_drvdata(dev);
 	int ctrlbank = lm3533_bl_get_ctrlbank_id(bl);
+	struct backlight_device *bd = bl->bd;
 	unsigned long linear;
 	int ret;
 
@@ -153,6 +154,9 @@ static ssize_t store_linear(struct device *dev, struct device_attribute *attr,
 	if (ret)
 		return ret;
 
+	bd->props.scale = linear ? BACKLIGHT_SCALE_LINEAR :
+				   BACKLIGHT_SCALE_NON_LINEAR;
+
 	return len;
 }
 
@@ -295,6 +299,8 @@ static int lm3533_bl_probe(struct platform_device *pdev)
 
 	bl->linear = device_property_read_bool(&pdev->dev,
 					       "ti,linear-mapping-mode");
+	props.scale = bl->linear ? BACKLIGHT_SCALE_LINEAR :
+				   BACKLIGHT_SCALE_NON_LINEAR;
 
 	bd = devm_backlight_device_register(&pdev->dev, name, &pdev->dev,
 					    bl, &lm3533_bl_ops, &props);
-- 
2.53.0

[PATCH v5 14/14] video: leds: backlight: lm3533: Support getting LED sources from DT

[Svyatoslav Ryhel]

Add Control Bank to HVLED/LVLED muxing support based on the led-sources
defined in the device tree.

Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
---
 drivers/leds/leds-lm3533.c          | 60 +++++++++++++++++++++++++++++
 drivers/video/backlight/lm3533_bl.c | 45 ++++++++++++++++++++++
 2 files changed, 105 insertions(+)

diff --git a/drivers/leds/leds-lm3533.c b/drivers/leds/leds-lm3533.c
index ed810c23f30f..9e07953814fd 100644
--- a/drivers/leds/leds-lm3533.c
+++ b/drivers/leds/leds-lm3533.c
@@ -27,6 +27,11 @@
 #define LM3533_ALS_CHANNEL_LV_MIN	1
 #define LM3533_ALS_CHANNEL_LV_MAX	2
 
+#define LM3533_REG_OUTPUT_CONF1			0x10
+#define   OUTPUT_CONF1_SHIFT			2
+#define   OUTPUT_LVLED_MASK			0x3
+#define LM3533_REG_OUTPUT_CONF2			0x11
+#define   OUTPUT_CONF2_SHIFT			6
 #define LM3533_REG_CTRLBANK_BCONF_BASE		0x1b
 #define LM3533_REG_PATTERN_ENABLE		0x28
 #define LM3533_REG_PATTERN_LOW_TIME_BASE	0x71
@@ -55,6 +60,9 @@ struct lm3533_led {
 	u32 max_current;
 	u32 pwm;
 
+	int num_leds;
+	u32 leds[LM3533_LVCTRLBANK_MAX];
+
 	bool have_als;
 };
 
@@ -623,8 +631,36 @@ static const struct attribute_group *lm3533_led_attribute_groups[] = {
 
 static int lm3533_led_setup(struct lm3533_led *led)
 {
+	u32 output_cfg_shift = 0;
+	u32 output_cfg_val = 0;
+	u32 output_cfg_mask = 0;
 	int ret;
 
+	if (led->num_leds) {
+		for (int i = 0; i < led->num_leds; i++) {
+			if (led->leds[i] >= LM3533_LVCTRLBANK_MAX)
+				continue;
+
+			output_cfg_shift = led->leds[i] * 2;
+			output_cfg_val |= led->id << output_cfg_shift;
+			output_cfg_mask |= OUTPUT_LVLED_MASK << output_cfg_shift;
+		}
+
+		/* LVLED1, LVLED2 and LVLED3 */
+		ret = regmap_update_bits(led->regmap, LM3533_REG_OUTPUT_CONF1,
+					 output_cfg_mask << OUTPUT_CONF1_SHIFT,
+					 output_cfg_val << OUTPUT_CONF1_SHIFT);
+		if (ret)
+			return ret;
+
+		/* LVLED4 and LVLED5 */
+		ret = regmap_update_bits(led->regmap, LM3533_REG_OUTPUT_CONF2,
+					 output_cfg_mask >> OUTPUT_CONF2_SHIFT,
+					 output_cfg_val >> OUTPUT_CONF2_SHIFT);
+		if (ret)
+			return ret;
+	}
+
 	ret = lm3533_ctrlbank_set_max_current(&led->cb, led->max_current);
 	if (ret)
 		return ret;
@@ -699,6 +735,30 @@ static int lm3533_led_probe(struct platform_device *pdev)
 
 	device_property_read_u32(&pdev->dev, "ti,pwm-config-mask", &led->pwm);
 
+	/*
+	 * If led-sources property is not set then either this Control Bank uses
+	 * its default LVLED or is not linked to any LVLED at all.
+	 */
+	led->num_leds = device_property_count_u32(&pdev->dev, "led-sources");
+	if (led->num_leds > LM3533_LVCTRLBANK_MAX) {
+		dev_err(&pdev->dev, "num of LED sources exceeds max %d: %d\n",
+			LM3533_LVCTRLBANK_MAX, led->num_leds);
+		ret = -EINVAL;
+		goto err_deregister;
+	}
+
+	if (led->num_leds < 0)
+		led->num_leds = 0;
+
+	if (led->num_leds > 0) {
+		ret = device_property_read_u32_array(&pdev->dev, "led-sources",
+						     led->leds, led->num_leds);
+		if (ret) {
+			dev_err(&pdev->dev, "failed to get led-sources\n");
+			goto err_deregister;
+		}
+	}
+
 	ret = lm3533_led_setup(led);
 	if (ret)
 		goto err_deregister;
diff --git a/drivers/video/backlight/lm3533_bl.c b/drivers/video/backlight/lm3533_bl.c
index c99fc68cb669..b3e5b3042d34 100644
--- a/drivers/video/backlight/lm3533_bl.c
+++ b/drivers/video/backlight/lm3533_bl.c
@@ -7,6 +7,7 @@
  * Author: Johan Hovold <jhovold@gmail.com>
  */
 
+#include <linux/bits.h>
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/mod_devicetable.h>
@@ -22,6 +23,7 @@
 #define LM3533_HVCTRLBANK_COUNT		2
 #define LM3533_BL_MAX_BRIGHTNESS	255
 
+#define LM3533_REG_OUTPUT_CONF1		0x10
 #define LM3533_REG_CTRLBANK_AB_BCONF	0x1a
 #define   CTRLBANK_AB_BCONF_ALS(n)	BIT(2 * (n))
 #define   CTRLBANK_AB_BCONF_MODE(n)	BIT(2 * (n) + 1)
@@ -36,6 +38,9 @@ struct lm3533_bl {
 	u32 max_current;
 	u32 pwm;
 
+	int num_leds;
+	u32 led_strings[LM3533_HVCTRLBANK_COUNT];
+
 	bool have_als;
 	bool linear;
 };
@@ -237,6 +242,8 @@ static const struct attribute_group *lm3533_bl_attribute_groups[] = {
 static int lm3533_bl_setup(struct lm3533_bl *bl)
 {
 	int ctrlbank = lm3533_bl_get_ctrlbank_id(bl);
+	u32 output_cfg_val = 0;
+	u32 output_cfg_mask = 0;
 	int ret;
 
 	ret = regmap_assign_bits(bl->regmap, LM3533_REG_CTRLBANK_AB_BCONF,
@@ -244,6 +251,21 @@ static int lm3533_bl_setup(struct lm3533_bl *bl)
 	if (ret)
 		return ret;
 
+	if (bl->num_leds) {
+		for (int i = 0; i < bl->num_leds; i++) {
+			if (bl->led_strings[i] >= LM3533_HVCTRLBANK_COUNT)
+				continue;
+
+			output_cfg_val |= ctrlbank << bl->led_strings[i];
+			output_cfg_mask |= BIT(bl->led_strings[i]);
+		}
+
+		ret = regmap_update_bits(bl->regmap, LM3533_REG_OUTPUT_CONF1,
+					 output_cfg_mask, output_cfg_val);
+		if (ret)
+			return ret;
+	}
+
 	ret = lm3533_ctrlbank_set_max_current(&bl->cb, bl->max_current);
 	if (ret)
 		return ret;
@@ -321,6 +343,29 @@ static int lm3533_bl_probe(struct platform_device *pdev)
 
 	device_property_read_u32(&pdev->dev, "ti,pwm-config-mask", &bl->pwm);
 
+	/*
+	 * If led-sources property is not set then either this Control Bank uses
+	 * its default HVLED or is not linked to any HVLED at all.
+	 */
+	bl->num_leds = device_property_count_u32(&pdev->dev, "led-sources");
+	if (bl->num_leds > LM3533_HVCTRLBANK_COUNT) {
+		dev_err(&pdev->dev, "num of LED sources %d exceeds max %d\n",
+			bl->num_leds, LM3533_HVCTRLBANK_COUNT);
+		return -EINVAL;
+	}
+
+	if (bl->num_leds < 0)
+		bl->num_leds = 0;
+
+	if (bl->num_leds > 0) {
+		ret = device_property_read_u32_array(&pdev->dev, "led-sources",
+						     bl->led_strings,
+						     bl->num_leds);
+		if (ret)
+			return dev_err_probe(&pdev->dev, ret,
+					     "failed to get led-sources\n");
+	}
+
 	ret = lm3533_bl_setup(bl);
 	if (ret)
 		return ret;
-- 
2.53.0

Re: [PATCH v5 02/14] mfd: lm3533: Remove driver specific regmap wrappers

[Andy Shevchenko]

On Wed, Jun 17, 2026 at 11:00:19AM +0300, Svyatoslav Ryhel wrote:
> Remove driver-specific regmap wrappers in favor of using regmap helpers
> directly.

OK, let's go with this variant.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>

Some side notes below for the record.

...

>  	struct lm3533_led *led = to_lm3533_led(led_cdev);
>  	unsigned enable;

Oh, besides using the old way of declaring unsigned int, it most likely
just needs to be kstrtobool().

>  	u8 reg;
> -	u8 mask;
> -	u8 val;
>  	int ret;
>  
>  	if (kstrtouint(buf, 0, &enable))
>  		return -EINVAL;

We should unshadow error codes (it may return more than -EINVAL).

>  	reg = lm3533_led_get_lv_reg(led, LM3533_REG_CTRLBANK_BCONF_BASE);
> -	mask = LM3533_REG_CTRLBANK_BCONF_ALS_EN_MASK;
>  
> -	if (enable)
> -		val = mask;
> -	else
> -		val = 0;
> -

...

> -	if (kstrtou8(buf, 0, &val))
> +	if (kstrtou32(buf, 0, &val))
>  		return -EINVAL;

Like in the previous case we should unshadow error codes.

-- 
With Best Regards,
Andy Shevchenko