From: Ajay Kumar Nandam <ajay.nandam@oss.qualcomm.com>
To: Bjorn Andersson <andersson@kernel.org>,
Linus Walleij <linusw@kernel.org>
Cc: linux-arm-msm@vger.kernel.org, linux-gpio@vger.kernel.org,
linux-kernel@vger.kernel.org,
mohammad.rafi.shaik@oss.qualcomm.com,
ajay.nandam@oss.qualcomm.com,
Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Subject: [PATCH v6 1/2] pinctrl: qcom: lpass-lpi: Enable runtime PM hooks on LPASS LPI SoCs
Date: Sat, 23 May 2026 02:16:43 +0530 [thread overview]
Message-ID: <20260522204644.4101640-2-ajay.nandam@oss.qualcomm.com> (raw)
In-Reply-To: <20260522204644.4101640-1-ajay.nandam@oss.qualcomm.com>
The LPASS LPI core conversion to PM clock framework relies on variant
drivers wiring runtime PM callbacks.
Hook up runtime PM callbacks for the LPASS LPI variant drivers touched
in this patch so they are prepared for the shared core conversion.
This commit is a preparatory NOP on its own, as runtime PM is still
disabled on these devices until the following core conversion patch.
This is a mechanical per-variant driver update that relies on the
same generic PM clock flow (of_pm_clk_add_clks() + pm_clk_suspend/
pm_clk_resume()) and DT-provided clocks.
Runtime behavior was validated on Kodiak (sc7280).
Suggested-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Ajay Kumar Nandam <ajay.nandam@oss.qualcomm.com>
---
.../pinctrl/qcom/pinctrl-milos-lpass-lpi.c | 7 +++++++
.../pinctrl/qcom/pinctrl-sc7280-lpass-lpi.c | 19 +++++++++++++------
.../pinctrl/qcom/pinctrl-sc8280xp-lpass-lpi.c | 15 +++++++++++----
.../pinctrl/qcom/pinctrl-sdm660-lpass-lpi.c | 7 +++++++
.../pinctrl/qcom/pinctrl-sdm670-lpass-lpi.c | 7 +++++++
.../pinctrl/qcom/pinctrl-sm4250-lpass-lpi.c | 7 +++++++
.../pinctrl/qcom/pinctrl-sm6115-lpass-lpi.c | 7 +++++++
.../pinctrl/qcom/pinctrl-sm6350-lpass-lpi.c | 7 +++++++
.../pinctrl/qcom/pinctrl-sm8250-lpass-lpi.c | 15 +++++++++++----
.../pinctrl/qcom/pinctrl-sm8450-lpass-lpi.c | 15 +++++++++++----
.../pinctrl/qcom/pinctrl-sm8550-lpass-lpi.c | 15 +++++++++++----
.../pinctrl/qcom/pinctrl-sm8650-lpass-lpi.c | 15 +++++++++++----
12 files changed, 110 insertions(+), 26 deletions(-)
diff --git a/drivers/pinctrl/qcom/pinctrl-milos-lpass-lpi.c b/drivers/pinctrl/qcom/pinctrl-milos-lpass-lpi.c
index 3bf6fe0cf1bb..72b8ffd97860 100644
--- a/drivers/pinctrl/qcom/pinctrl-milos-lpass-lpi.c
+++ b/drivers/pinctrl/qcom/pinctrl-milos-lpass-lpi.c
@@ -7,6 +7,8 @@
#include <linux/gpio/driver.h>
#include <linux/module.h>
#include <linux/platform_device.h>
+#include <linux/pm_clock.h>
+#include <linux/pm_runtime.h>
#include "pinctrl-lpass-lpi.h"
@@ -203,10 +205,15 @@ static const struct of_device_id lpi_pinctrl_of_match[] = {
};
MODULE_DEVICE_TABLE(of, lpi_pinctrl_of_match);
+static const struct dev_pm_ops lpi_pinctrl_pm_ops = {
+ RUNTIME_PM_OPS(pm_clk_suspend, pm_clk_resume, NULL)
+};
+
static struct platform_driver lpi_pinctrl_driver = {
.driver = {
.name = "qcom-milos-lpass-lpi-pinctrl",
.of_match_table = lpi_pinctrl_of_match,
+ .pm = pm_ptr(&lpi_pinctrl_pm_ops),
},
.probe = lpi_pinctrl_probe,
.remove = lpi_pinctrl_remove,
diff --git a/drivers/pinctrl/qcom/pinctrl-sc7280-lpass-lpi.c b/drivers/pinctrl/qcom/pinctrl-sc7280-lpass-lpi.c
index 750f410311a8..a61df10d46cb 100644
--- a/drivers/pinctrl/qcom/pinctrl-sc7280-lpass-lpi.c
+++ b/drivers/pinctrl/qcom/pinctrl-sc7280-lpass-lpi.c
@@ -7,6 +7,8 @@
#include <linux/gpio/driver.h>
#include <linux/module.h>
#include <linux/platform_device.h>
+#include <linux/pm_clock.h>
+#include <linux/pm_runtime.h>
#include "pinctrl-lpass-lpi.h"
@@ -129,20 +131,25 @@ static const struct lpi_pinctrl_variant_data sc7280_lpi_data = {
static const struct of_device_id lpi_pinctrl_of_match[] = {
{
- .compatible = "qcom,sc7280-lpass-lpi-pinctrl",
- .data = &sc7280_lpi_data,
+ .compatible = "qcom,sc7280-lpass-lpi-pinctrl",
+ .data = &sc7280_lpi_data,
}, {
- .compatible = "qcom,sm8350-lpass-lpi-pinctrl",
- .data = &sc7280_lpi_data,
+ .compatible = "qcom,sm8350-lpass-lpi-pinctrl",
+ .data = &sc7280_lpi_data,
},
{ }
};
MODULE_DEVICE_TABLE(of, lpi_pinctrl_of_match);
+static const struct dev_pm_ops lpi_pinctrl_pm_ops = {
+ RUNTIME_PM_OPS(pm_clk_suspend, pm_clk_resume, NULL)
+};
+
static struct platform_driver lpi_pinctrl_driver = {
.driver = {
- .name = "qcom-sc7280-lpass-lpi-pinctrl",
- .of_match_table = lpi_pinctrl_of_match,
+ .name = "qcom-sc7280-lpass-lpi-pinctrl",
+ .of_match_table = lpi_pinctrl_of_match,
+ .pm = pm_ptr(&lpi_pinctrl_pm_ops),
},
.probe = lpi_pinctrl_probe,
.remove = lpi_pinctrl_remove,
diff --git a/drivers/pinctrl/qcom/pinctrl-sc8280xp-lpass-lpi.c b/drivers/pinctrl/qcom/pinctrl-sc8280xp-lpass-lpi.c
index 0e839b6aaaf4..27c47710365e 100644
--- a/drivers/pinctrl/qcom/pinctrl-sc8280xp-lpass-lpi.c
+++ b/drivers/pinctrl/qcom/pinctrl-sc8280xp-lpass-lpi.c
@@ -6,6 +6,8 @@
#include <linux/gpio/driver.h>
#include <linux/module.h>
#include <linux/platform_device.h>
+#include <linux/pm_clock.h>
+#include <linux/pm_runtime.h>
#include "pinctrl-lpass-lpi.h"
@@ -166,17 +168,22 @@ static const struct lpi_pinctrl_variant_data sc8280xp_lpi_data = {
static const struct of_device_id lpi_pinctrl_of_match[] = {
{
- .compatible = "qcom,sc8280xp-lpass-lpi-pinctrl",
- .data = &sc8280xp_lpi_data,
+ .compatible = "qcom,sc8280xp-lpass-lpi-pinctrl",
+ .data = &sc8280xp_lpi_data,
},
{ }
};
MODULE_DEVICE_TABLE(of, lpi_pinctrl_of_match);
+static const struct dev_pm_ops lpi_pinctrl_pm_ops = {
+ RUNTIME_PM_OPS(pm_clk_suspend, pm_clk_resume, NULL)
+};
+
static struct platform_driver lpi_pinctrl_driver = {
.driver = {
- .name = "qcom-sc8280xp-lpass-lpi-pinctrl",
- .of_match_table = lpi_pinctrl_of_match,
+ .name = "qcom-sc8280xp-lpass-lpi-pinctrl",
+ .of_match_table = lpi_pinctrl_of_match,
+ .pm = pm_ptr(&lpi_pinctrl_pm_ops),
},
.probe = lpi_pinctrl_probe,
.remove = lpi_pinctrl_remove,
diff --git a/drivers/pinctrl/qcom/pinctrl-sdm660-lpass-lpi.c b/drivers/pinctrl/qcom/pinctrl-sdm660-lpass-lpi.c
index 65411abfbfac..7b5aacaae7d7 100644
--- a/drivers/pinctrl/qcom/pinctrl-sdm660-lpass-lpi.c
+++ b/drivers/pinctrl/qcom/pinctrl-sdm660-lpass-lpi.c
@@ -10,6 +10,8 @@
#include <linux/module.h>
#include <linux/of.h>
#include <linux/platform_device.h>
+#include <linux/pm_clock.h>
+#include <linux/pm_runtime.h>
#include <linux/pinctrl/pinctrl.h>
#include "pinctrl-lpass-lpi.h"
@@ -145,10 +147,15 @@ static const struct of_device_id sdm660_lpi_pinctrl_of_match[] = {
};
MODULE_DEVICE_TABLE(of, sdm660_lpi_pinctrl_of_match);
+static const struct dev_pm_ops lpi_pinctrl_pm_ops = {
+ RUNTIME_PM_OPS(pm_clk_suspend, pm_clk_resume, NULL)
+};
+
static struct platform_driver sdm660_lpi_pinctrl_driver = {
.driver = {
.name = "qcom-sdm660-lpass-lpi-pinctrl",
.of_match_table = sdm660_lpi_pinctrl_of_match,
+ .pm = pm_ptr(&lpi_pinctrl_pm_ops),
},
.probe = lpi_pinctrl_probe,
.remove = lpi_pinctrl_remove,
diff --git a/drivers/pinctrl/qcom/pinctrl-sdm670-lpass-lpi.c b/drivers/pinctrl/qcom/pinctrl-sdm670-lpass-lpi.c
index 858146c408d0..0a31f7ad2e0d 100644
--- a/drivers/pinctrl/qcom/pinctrl-sdm670-lpass-lpi.c
+++ b/drivers/pinctrl/qcom/pinctrl-sdm670-lpass-lpi.c
@@ -7,6 +7,8 @@
#include <linux/module.h>
#include <linux/of.h>
#include <linux/platform_device.h>
+#include <linux/pm_clock.h>
+#include <linux/pm_runtime.h>
#include <linux/pinctrl/pinctrl.h>
#include "pinctrl-lpass-lpi.h"
@@ -151,10 +153,15 @@ static const struct of_device_id sdm670_lpi_pinctrl_of_match[] = {
};
MODULE_DEVICE_TABLE(of, sdm670_lpi_pinctrl_of_match);
+static const struct dev_pm_ops lpi_pinctrl_pm_ops = {
+ RUNTIME_PM_OPS(pm_clk_suspend, pm_clk_resume, NULL)
+};
+
static struct platform_driver sdm670_lpi_pinctrl_driver = {
.driver = {
.name = "qcom-sdm670-lpass-lpi-pinctrl",
.of_match_table = sdm670_lpi_pinctrl_of_match,
+ .pm = pm_ptr(&lpi_pinctrl_pm_ops),
},
.probe = lpi_pinctrl_probe,
.remove = lpi_pinctrl_remove,
diff --git a/drivers/pinctrl/qcom/pinctrl-sm4250-lpass-lpi.c b/drivers/pinctrl/qcom/pinctrl-sm4250-lpass-lpi.c
index c0e178be9cfc..75bafa62426a 100644
--- a/drivers/pinctrl/qcom/pinctrl-sm4250-lpass-lpi.c
+++ b/drivers/pinctrl/qcom/pinctrl-sm4250-lpass-lpi.c
@@ -7,6 +7,8 @@
#include <linux/gpio/driver.h>
#include <linux/module.h>
#include <linux/platform_device.h>
+#include <linux/pm_clock.h>
+#include <linux/pm_runtime.h>
#include "pinctrl-lpass-lpi.h"
@@ -221,10 +223,15 @@ static const struct of_device_id lpi_pinctrl_of_match[] = {
};
MODULE_DEVICE_TABLE(of, lpi_pinctrl_of_match);
+static const struct dev_pm_ops lpi_pinctrl_pm_ops = {
+ RUNTIME_PM_OPS(pm_clk_suspend, pm_clk_resume, NULL)
+};
+
static struct platform_driver lpi_pinctrl_driver = {
.driver = {
.name = "qcom-sm4250-lpass-lpi-pinctrl",
.of_match_table = lpi_pinctrl_of_match,
+ .pm = pm_ptr(&lpi_pinctrl_pm_ops),
},
.probe = lpi_pinctrl_probe,
.remove = lpi_pinctrl_remove,
diff --git a/drivers/pinctrl/qcom/pinctrl-sm6115-lpass-lpi.c b/drivers/pinctrl/qcom/pinctrl-sm6115-lpass-lpi.c
index b7d9186861a2..05435ea6e17a 100644
--- a/drivers/pinctrl/qcom/pinctrl-sm6115-lpass-lpi.c
+++ b/drivers/pinctrl/qcom/pinctrl-sm6115-lpass-lpi.c
@@ -7,6 +7,8 @@
#include <linux/gpio/driver.h>
#include <linux/module.h>
#include <linux/platform_device.h>
+#include <linux/pm_clock.h>
+#include <linux/pm_runtime.h>
#include "pinctrl-lpass-lpi.h"
@@ -141,10 +143,15 @@ static const struct of_device_id lpi_pinctrl_of_match[] = {
};
MODULE_DEVICE_TABLE(of, lpi_pinctrl_of_match);
+static const struct dev_pm_ops lpi_pinctrl_pm_ops = {
+ RUNTIME_PM_OPS(pm_clk_suspend, pm_clk_resume, NULL)
+};
+
static struct platform_driver lpi_pinctrl_driver = {
.driver = {
.name = "qcom-sm6115-lpass-lpi-pinctrl",
.of_match_table = lpi_pinctrl_of_match,
+ .pm = pm_ptr(&lpi_pinctrl_pm_ops),
},
.probe = lpi_pinctrl_probe,
.remove = lpi_pinctrl_remove,
diff --git a/drivers/pinctrl/qcom/pinctrl-sm6350-lpass-lpi.c b/drivers/pinctrl/qcom/pinctrl-sm6350-lpass-lpi.c
index 4d06abcfedfd..946b23084304 100644
--- a/drivers/pinctrl/qcom/pinctrl-sm6350-lpass-lpi.c
+++ b/drivers/pinctrl/qcom/pinctrl-sm6350-lpass-lpi.c
@@ -6,6 +6,8 @@
#include <linux/gpio/driver.h>
#include <linux/module.h>
#include <linux/platform_device.h>
+#include <linux/pm_clock.h>
+#include <linux/pm_runtime.h>
#include "pinctrl-lpass-lpi.h"
@@ -135,10 +137,15 @@ static const struct of_device_id lpi_pinctrl_of_match[] = {
};
MODULE_DEVICE_TABLE(of, lpi_pinctrl_of_match);
+static const struct dev_pm_ops lpi_pinctrl_pm_ops = {
+ RUNTIME_PM_OPS(pm_clk_suspend, pm_clk_resume, NULL)
+};
+
static struct platform_driver lpi_pinctrl_driver = {
.driver = {
.name = "qcom-sm6350-lpass-lpi-pinctrl",
.of_match_table = lpi_pinctrl_of_match,
+ .pm = pm_ptr(&lpi_pinctrl_pm_ops),
},
.probe = lpi_pinctrl_probe,
.remove = lpi_pinctrl_remove,
diff --git a/drivers/pinctrl/qcom/pinctrl-sm8250-lpass-lpi.c b/drivers/pinctrl/qcom/pinctrl-sm8250-lpass-lpi.c
index c27452eece3e..454de788be21 100644
--- a/drivers/pinctrl/qcom/pinctrl-sm8250-lpass-lpi.c
+++ b/drivers/pinctrl/qcom/pinctrl-sm8250-lpass-lpi.c
@@ -7,6 +7,8 @@
#include <linux/gpio/driver.h>
#include <linux/module.h>
#include <linux/platform_device.h>
+#include <linux/pm_clock.h>
+#include <linux/pm_runtime.h>
#include "pinctrl-lpass-lpi.h"
@@ -127,17 +129,22 @@ static const struct lpi_pinctrl_variant_data sm8250_lpi_data = {
static const struct of_device_id lpi_pinctrl_of_match[] = {
{
- .compatible = "qcom,sm8250-lpass-lpi-pinctrl",
- .data = &sm8250_lpi_data,
+ .compatible = "qcom,sm8250-lpass-lpi-pinctrl",
+ .data = &sm8250_lpi_data,
},
{ }
};
MODULE_DEVICE_TABLE(of, lpi_pinctrl_of_match);
+static const struct dev_pm_ops lpi_pinctrl_pm_ops = {
+ RUNTIME_PM_OPS(pm_clk_suspend, pm_clk_resume, NULL)
+};
+
static struct platform_driver lpi_pinctrl_driver = {
.driver = {
- .name = "qcom-sm8250-lpass-lpi-pinctrl",
- .of_match_table = lpi_pinctrl_of_match,
+ .name = "qcom-sm8250-lpass-lpi-pinctrl",
+ .of_match_table = lpi_pinctrl_of_match,
+ .pm = pm_ptr(&lpi_pinctrl_pm_ops),
},
.probe = lpi_pinctrl_probe,
.remove = lpi_pinctrl_remove,
diff --git a/drivers/pinctrl/qcom/pinctrl-sm8450-lpass-lpi.c b/drivers/pinctrl/qcom/pinctrl-sm8450-lpass-lpi.c
index 439f6541622e..834eee8dcce9 100644
--- a/drivers/pinctrl/qcom/pinctrl-sm8450-lpass-lpi.c
+++ b/drivers/pinctrl/qcom/pinctrl-sm8450-lpass-lpi.c
@@ -6,6 +6,8 @@
#include <linux/gpio/driver.h>
#include <linux/module.h>
#include <linux/platform_device.h>
+#include <linux/pm_clock.h>
+#include <linux/pm_runtime.h>
#include "pinctrl-lpass-lpi.h"
@@ -195,17 +197,22 @@ static const struct lpi_pinctrl_variant_data sm8450_lpi_data = {
static const struct of_device_id lpi_pinctrl_of_match[] = {
{
- .compatible = "qcom,sm8450-lpass-lpi-pinctrl",
- .data = &sm8450_lpi_data,
+ .compatible = "qcom,sm8450-lpass-lpi-pinctrl",
+ .data = &sm8450_lpi_data,
},
{ }
};
MODULE_DEVICE_TABLE(of, lpi_pinctrl_of_match);
+static const struct dev_pm_ops lpi_pinctrl_pm_ops = {
+ RUNTIME_PM_OPS(pm_clk_suspend, pm_clk_resume, NULL)
+};
+
static struct platform_driver lpi_pinctrl_driver = {
.driver = {
- .name = "qcom-sm8450-lpass-lpi-pinctrl",
- .of_match_table = lpi_pinctrl_of_match,
+ .name = "qcom-sm8450-lpass-lpi-pinctrl",
+ .of_match_table = lpi_pinctrl_of_match,
+ .pm = pm_ptr(&lpi_pinctrl_pm_ops),
},
.probe = lpi_pinctrl_probe,
.remove = lpi_pinctrl_remove,
diff --git a/drivers/pinctrl/qcom/pinctrl-sm8550-lpass-lpi.c b/drivers/pinctrl/qcom/pinctrl-sm8550-lpass-lpi.c
index 73065919c8c2..875e04e5d2b9 100644
--- a/drivers/pinctrl/qcom/pinctrl-sm8550-lpass-lpi.c
+++ b/drivers/pinctrl/qcom/pinctrl-sm8550-lpass-lpi.c
@@ -6,6 +6,8 @@
#include <linux/gpio/driver.h>
#include <linux/module.h>
#include <linux/platform_device.h>
+#include <linux/pm_clock.h>
+#include <linux/pm_runtime.h>
#include "pinctrl-lpass-lpi.h"
@@ -203,17 +205,22 @@ static const struct lpi_pinctrl_variant_data sm8550_lpi_data = {
static const struct of_device_id lpi_pinctrl_of_match[] = {
{
- .compatible = "qcom,sm8550-lpass-lpi-pinctrl",
- .data = &sm8550_lpi_data,
+ .compatible = "qcom,sm8550-lpass-lpi-pinctrl",
+ .data = &sm8550_lpi_data,
},
{ }
};
MODULE_DEVICE_TABLE(of, lpi_pinctrl_of_match);
+static const struct dev_pm_ops lpi_pinctrl_pm_ops = {
+ RUNTIME_PM_OPS(pm_clk_suspend, pm_clk_resume, NULL)
+};
+
static struct platform_driver lpi_pinctrl_driver = {
.driver = {
- .name = "qcom-sm8550-lpass-lpi-pinctrl",
- .of_match_table = lpi_pinctrl_of_match,
+ .name = "qcom-sm8550-lpass-lpi-pinctrl",
+ .of_match_table = lpi_pinctrl_of_match,
+ .pm = pm_ptr(&lpi_pinctrl_pm_ops),
},
.probe = lpi_pinctrl_probe,
.remove = lpi_pinctrl_remove,
diff --git a/drivers/pinctrl/qcom/pinctrl-sm8650-lpass-lpi.c b/drivers/pinctrl/qcom/pinctrl-sm8650-lpass-lpi.c
index f9fcedf5a65d..bc7889c993d0 100644
--- a/drivers/pinctrl/qcom/pinctrl-sm8650-lpass-lpi.c
+++ b/drivers/pinctrl/qcom/pinctrl-sm8650-lpass-lpi.c
@@ -6,6 +6,8 @@
#include <linux/gpio/driver.h>
#include <linux/module.h>
#include <linux/platform_device.h>
+#include <linux/pm_clock.h>
+#include <linux/pm_runtime.h>
#include "pinctrl-lpass-lpi.h"
@@ -210,17 +212,22 @@ static const struct lpi_pinctrl_variant_data sm8650_lpi_data = {
static const struct of_device_id lpi_pinctrl_of_match[] = {
{
- .compatible = "qcom,sm8650-lpass-lpi-pinctrl",
- .data = &sm8650_lpi_data,
+ .compatible = "qcom,sm8650-lpass-lpi-pinctrl",
+ .data = &sm8650_lpi_data,
},
{ }
};
MODULE_DEVICE_TABLE(of, lpi_pinctrl_of_match);
+static const struct dev_pm_ops lpi_pinctrl_pm_ops = {
+ RUNTIME_PM_OPS(pm_clk_suspend, pm_clk_resume, NULL)
+};
+
static struct platform_driver lpi_pinctrl_driver = {
.driver = {
- .name = "qcom-sm8650-lpass-lpi-pinctrl",
- .of_match_table = lpi_pinctrl_of_match,
+ .name = "qcom-sm8650-lpass-lpi-pinctrl",
+ .of_match_table = lpi_pinctrl_of_match,
+ .pm = pm_ptr(&lpi_pinctrl_pm_ops),
},
.probe = lpi_pinctrl_probe,
.remove = lpi_pinctrl_remove,
--
2.34.1
next prev parent reply other threads:[~2026-05-22 20:47 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-05-22 20:46 [PATCH v6 RESEND 0/2] pinctrl: qcom: lpass-lpi: Switch to PM clock framework Ajay Kumar Nandam
2026-05-22 20:46 ` Ajay Kumar Nandam [this message]
2026-06-15 23:50 ` [PATCH v6 1/2] pinctrl: qcom: lpass-lpi: Enable runtime PM hooks on LPASS LPI SoCs Dmitry Baryshkov
2026-05-22 20:46 ` [PATCH v6 2/2] pinctrl: qcom: lpass-lpi: Switch to PM clock framework for runtime PM Ajay Kumar Nandam
2026-06-09 23:12 ` Nathan Chancellor
2026-06-10 8:14 ` Ajay Kumar Nandam
2026-06-10 6:18 ` Krzysztof Kozlowski
2026-06-10 8:17 ` Ajay Kumar Nandam
2026-05-26 9:37 ` [PATCH v6 RESEND 0/2] pinctrl: qcom: lpass-lpi: Switch to PM clock framework Linus Walleij
2026-06-15 15:54 ` Bartosz Golaszewski
2026-06-15 22:37 ` Linus Walleij
2026-06-08 8:47 ` Linus Walleij
-- strict thread matches above, loose matches on Subject: below --
2026-05-13 14:00 [PATCH v5 " Ajay Kumar Nandam
2026-05-22 20:33 ` [PATCH v6 " Ajay Kumar Nandam
2026-05-22 20:33 ` [PATCH v6 1/2] pinctrl: qcom: lpass-lpi: Enable runtime PM hooks on LPASS LPI SoCs Ajay Kumar Nandam
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260522204644.4101640-2-ajay.nandam@oss.qualcomm.com \
--to=ajay.nandam@oss.qualcomm.com \
--cc=andersson@kernel.org \
--cc=konrad.dybcio@oss.qualcomm.com \
--cc=linusw@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mohammad.rafi.shaik@oss.qualcomm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox