Icom programming software?

Icom programming software?

[John Ackermann N8UR]

Sorry if I'm missing something obvious, but a google search didn't turn 
anything up.

Is there a Linux tool available for programming an Icom T-90 HT?

Thanks,

John N8UR
jra@febo.com

RE: Icom programming software?

[T + J Williams]

John,

You may want to check at:
http://radio.linux.org.au
In the rig control software section.

73,
Ted - wa0eir


> -----Original Message-----
> From: linux-hams-owner@vger.kernel.org 
> [mailto:linux-hams-owner@vger.kernel.org] On Behalf Of John 
> Ackermann N8UR
> Sent: Thursday, September 11, 2003 4:07 PM
> To: linux-hams@vger.kernel.org
> Subject: Icom programming software?
> 
> 
> Sorry if I'm missing something obvious, but a google search 
> didn't turn 
> anything up.
> 
> Is there a Linux tool available for programming an Icom T-90 HT?
> 
> Thanks,
> 
> John N8UR
> jra@febo.com
> 
> -
> To unsubscribe from this list: send the line "unsubscribe 
> linux-hams" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 

RE: Icom programming software?

[John Ackermann N8UR]

Thanks, but there's nothing there for the T90 -- closest is a couple of 
programs for the IC-Q7, but I don't know if the two radios use the same 
interface.

73,
John

--On Thursday, September 11, 2003 16:15:45 -0500 T + J Williams 
<wa0eir@mchsi.com> wrote:

>
> John,
>
> You may want to check at:
> http://radio.linux.org.au
> In the rig control software section.
>
> 73,
> Ted - wa0eir
>
>
>> -----Original Message-----
>> From: linux-hams-owner@vger.kernel.org
>> [mailto:linux-hams-owner@vger.kernel.org] On Behalf Of John
>> Ackermann N8UR
>> Sent: Thursday, September 11, 2003 4:07 PM
>> To: linux-hams@vger.kernel.org
>> Subject: Icom programming software?
>>
>>
>> Sorry if I'm missing something obvious, but a google search
>> didn't turn
>> anything up.
>>
>> Is there a Linux tool available for programming an Icom T-90 HT?
>>
>> Thanks,
>>
>> John N8UR
>> jra@febo.com
>>
>> -
>> To unsubscribe from this list: send the line "unsubscribe
>> linux-hams" in
>> the body of a message to majordomo@vger.kernel.org
>> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>>
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-hams" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>
>

Re: Icom programming software?

[Nate Bargmann]

* John Ackermann N8UR <jra@febo.com> [2003 Sep 11 18:00 -0500]:
> Thanks, but there's nothing there for the T90 -- closest is a couple of 
> programs for the IC-Q7, but I don't know if the two radios use the same 
> interface.

John, part of the problem is whether or not the protocol is documented.
In many cases it seems the HTs and what not probably just do a memory
dump and the proprietary software is written to handle the specific
model.  If there are no rig control programming specs, there is little
that can be done unless someone wants to engage in a fair amount of
reverse engineering, I would assume.

Of course, the manufacturers can't be bothered to offer anything except
some one-off program for That Proprietary OS...

73, de Nate >>

-- 
 Wireless | Amateur Radio Station N0NB          | "We have awakened a
 Internet | n0nb@networksplus.net               | sleeping giant and
 Location | Bremen, Kansas USA EM19ov           | have instilled in him
  Amateur radio exams; ham radio; Linux info @  | a terrible resolve".
             http://www.qsl.net/n0nb/           | - Admiral Yamamoto