USB to Serial adapter.

USB to Serial adapter.

[Al Scanandoah]

Any recommendations on units that can get up and running with little to
no pain?  I know that they're definitely not all created equal.  Running
openSuSE 11.1.

73 - Al, K2ZN

re: USB to Serial adapter.

[Chion Jacques]

Hello,
i am running with units based on pl2303 without problems.

73, jim F6CWO

> Message du 09/05/09 18:34
> De : "Al Scanandoah" 
> A : "Linux-Hams" 

> Copie à : 
> Objet : USB to Serial adapter.
> 
> 
> Any recommendations on units that can get up and running with little to
> no pain? I know that they're definitely not all created equal. Running
> openSuSE 11.1.
> 
> 73 - Al, K2ZN
> --
> To unsubscribe from this list: send the line "unsubscribe linux-hams" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> 
> 




Jacques Chion

http://www.bach-en-drome-des-collines.eu
http://www.maison-du-jeu-saint-donat.net

--
To unsubscribe from this list: send the line "unsubscribe linux-hams" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: USB to Serial adapter.

[Neville A. Cross]

On Sat, May 9, 2009 at 11:22 AM, Chion Jacques <f6cwo@orange.fr> wrote:
> Hello,
> i am running with units based on pl2303 without problems.
>
> 73, jim F6CWO
>

I use units based on the same pl2303 without problems too!

-- 
Neville
https://fedoraproject.org/wiki/User:Yn1v
Linux User # 473217

Re: USB to Serial adapter.

[Chuck Hast]

On Sat, May 9, 2009 at 12:34 PM, Al Scanandoah <k2zn@rochester.rr.com> wrote:
> Any recommendations on units that can get up and running with little to
> no pain?  I know that they're definitely not all created equal.  Running
> openSuSE 11.1.
>
> 73 - Al, K2ZN
> --
> To unsubscribe from this list: send the line "unsubscribe linux-hams" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>
I have used several of them and so far never have had a problem with Linux,
I have the programming software for the IC-92AD on both my laptop and my
home machine both running Suse 11.1 with the software under Wine, no
issues. The corporate laptop is XP, I have 4 of the things 2 I can not use
under XP because I can not find the drivers, but they work just fine under
Linux.

Sure wish Icom would bring out a Linux version, cheee they run linux on
the D-Star repeater stuff and database, why not provide a Linux version
of the programmer....


-- 
Chuck Hast  -- KP4DJT --
To paraphrase my flight instructor;
"the only dumb question is the one you DID NOT ask resulting in my going
out and having to identify your bits and pieces in the midst of torn
and twisted metal."
--
To unsubscribe from this list: send the line "unsubscribe linux-hams" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: USB to Serial adapter.

[Douglas Cole]

I use KEYSPAN, they work great, no problems.
But what are you wanting to use them for?

I don't recall using hardware handshaking on mine so YMMV...

Doug
N7BFS

On Sat, May 9, 2009 at 9:34 AM, Al Scanandoah <k2zn@rochester.rr.com> wrote:
> Any recommendations on units that can get up and running with little to
> no pain?  I know that they're definitely not all created equal.  Running
> openSuSE 11.1.
>
> 73 - Al, K2ZN
> --
> To unsubscribe from this list: send the line "unsubscribe linux-hams" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>



-- 
Douglas Cole
--
To unsubscribe from this list: send the line "unsubscribe linux-hams" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: USB to Serial adapter.

[IT2 Stuart Blake Tener, USNR]

ALCON:

    There are several good choices. I recommend the Prolific, which is based
on the PL-2303 or PL-2313 chipset, and Prolific has been good about offering
drivers to function within a MacOS, Linux, and Windoze environment.

    I have found their product to work perfectly in all three of those types
of environments, and recommend it.


73 and V/R,

Stuart
N3GWG


On 5/9/09 4:42 PM, "Douglas Cole" <doug.n7bfs@gmail.com> wrote:

> I use KEYSPAN, they work great, no problems.
> But what are you wanting to use them for?
> 
> I don't recall using hardware handshaking on mine so YMMV...
> 
> Doug
> N7BFS
> 
> On Sat, May 9, 2009 at 9:34 AM, Al Scanandoah <k2zn@rochester.rr.com> wrote:
>> Any recommendations on units that can get up and running with little to
>> no pain?  I know that they're definitely not all created equal.  Running
>> openSuSE 11.1.
>> 
>> 73 - Al, K2ZN
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-hams" in
>> the body of a message to majordomo@vger.kernel.org
>> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>> 
> 
> 




-- 

Very Respectfully,

IT2 Stuart Blake Tener, USNR
Las Vegas, NV / Beverly Hills, CA / Philadelphia, PA / Washington, DC
Amateur Radio Call Sign: N3GWG (Extra) / Marine Radio Operator Permit (MROP)
email: teners@bh90210.net (also carbon copies to my Blackberry)
phone: +(1) 310.358.0202 (Beverly Hills, CA, forwards to mobile phone)
phone: +(1) 215.338.6005 (Philadelphia, PA, voice mail only)
E-Fax: +(1) 928.437.4505 (Telecopier, fax to email gateway)

Military emails (checked monthly until remote NMCI access is secured)
NIPRNET: stuart.tener@navy.mil
NIPRNET: stuart.b.tener@us.army.mil
NRO:     teners@nro.mil
TS/SCI:  tenerstu@nro.ic.gov (GWAN)

Confidentiality Notice: This e-mail message, including any attachments, is
for the sole use of the intended recipient(s) and may contain confidential
and/or privileged information, though strictly at the UNCLASSIFIED level.
Any unauthorized review, use, disclosure or distribution is prohibited. If
you are not the intended recipient, please contact the sender by reply
e-mail and destroy all copies of the originate message.




--
To unsubscribe from this list: send the line "unsubscribe linux-hams" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: USB to Serial adapter.

[Andrew Errington]

On Sun, May 10, 2009 13:26, IT2 Stuart Blake Tener, USNR wrote:
> ALCON:
>
>
> There are several good choices. I recommend the Prolific, which is based
> on the PL-2303 or PL-2313 chipset, and Prolific has been good about
> offering drivers to function within a MacOS, Linux, and Windoze
> environment.
>

To be more specific, I have found the Bafo BF-810 product to work well
under Linux.  Indeed this product uses the PL2303 chipset, but without
knowing in advance it's very hard to be sure the product you are buying
has this chipset.

HTH,

73,

Andrew
ZL3AME

PS Why isn't this mailing list configured to 'reply to list'?  Makes
things rather annoying.

Re: USB to Serial adapter.

[Ray Wells]

The Aten UC-232A also uses the PL-2303 chipset and works with Linux and 
Windoze.

Ray vk2tv


Andrew Errington wrote:
> On Sun, May 10, 2009 13:26, IT2 Stuart Blake Tener, USNR wrote:
>   
>> ALCON:
>>
>>
>> There are several good choices. I recommend the Prolific, which is based
>> on the PL-2303 or PL-2313 chipset, and Prolific has been good about
>> offering drivers to function within a MacOS, Linux, and Windoze
>> environment.
>>
>>     
>
> To be more specific, I have found the Bafo BF-810 product to work well
> under Linux.  Indeed this product uses the PL2303 chipset, but without
> knowing in advance it's very hard to be sure the product you are buying
> has this chipset.
>
> HTH,
>
> 73,
>
> Andrew
> ZL3AME
>
> PS Why isn't this mailing list configured to 'reply to list'?  Makes
> things rather annoying.
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-hams" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>
>   

Re: USB to Serial adapter.

[walter harms]

my experience is very mixed.
USB->serial seems no problem at "normal" 9600 but had serve problems with
more unusual settings. The quality of the circuits vary very much. They may
run for days and fail suddenly to be ok again after a reset.

The next thing is that companies tend to change the chipsets inside without
notice. I  remember one occasion where an older device was working fine
while the latest production failed completely.

I was very disappointed since you have no real change to debug WHAT causes
the problem. Now i try to avoid USB->Serial so far as possible.

re,
 wh

Al Scanandoah schrieb:
> Any recommendations on units that can get up and running with little to
> no pain?  I know that they're definitely not all created equal.  Running
> openSuSE 11.1.
> 
> 73 - Al, K2ZN

Re: USB to Serial adapter.

[Al Scanandoah]

.Thanks to all for the info.  It appears that the PL2303 units show the
most promise; I'll have to track one down.  Over the weekend, I dug up
an old Socket Communications PCMCIA adapter that seems to work, but the
connector is flimsy.

I'm not doing anything too strenuous, just using the port for PTT and CW
keying.

73, Al