* [PATCH v6 1/2] dt-bindings: arm: aspeed: add IBM SBP1 board
@ 2024-11-04 9:22 Naresh Solanki
2024-11-04 9:22 ` [PATCH v6 2/2] ARM: dts: aspeed: sbp1: IBM sbp1 BMC board Naresh Solanki
` (2 more replies)
0 siblings, 3 replies; 13+ messages in thread
From: Naresh Solanki @ 2024-11-04 9:22 UTC (permalink / raw)
To: robh, krzk+dt, conor+dt, devicetree, linux-kernel, jdelvare,
linux, sylv, linux-hwmon, Joel Stanley, Andrew Jeffery
Cc: Naresh Solanki, Conor Dooley, linux-arm-kernel, linux-aspeed
Document the new compatibles used on IBM SBP1.
Signed-off-by: Naresh Solanki <naresh.solanki@9elements.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
---
Changes in V4:
- Retain Acked-by from v2.
- Fix alphabetic order
---
Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml b/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml
index 2f92b8ab08fa..c79c74ab3d78 100644
--- a/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml
+++ b/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml
@@ -91,6 +91,7 @@ properties:
- ibm,everest-bmc
- ibm,fuji-bmc
- ibm,rainier-bmc
+ - ibm,sbp1-bmc
- ibm,system1-bmc
- ibm,tacoma-bmc
- inventec,starscream-bmc
base-commit: 30a984c0c9d8c631cc135280f83c441d50096b6d
--
2.42.0
^ permalink raw reply related [flat|nested] 13+ messages in thread
* [PATCH v6 2/2] ARM: dts: aspeed: sbp1: IBM sbp1 BMC board
2024-11-04 9:22 [PATCH v6 1/2] dt-bindings: arm: aspeed: add IBM SBP1 board Naresh Solanki
@ 2024-11-04 9:22 ` Naresh Solanki
2024-11-05 0:33 ` Andrew Jeffery
2024-11-04 14:39 ` [PATCH v6 1/2] dt-bindings: arm: aspeed: add IBM SBP1 board Rob Herring (Arm)
2024-11-06 0:37 ` Andrew Jeffery
2 siblings, 1 reply; 13+ messages in thread
From: Naresh Solanki @ 2024-11-04 9:22 UTC (permalink / raw)
To: robh, krzk+dt, conor+dt, devicetree, linux-kernel, jdelvare,
linux, sylv, linux-hwmon, Joel Stanley, Andrew Jeffery
Cc: Patrick Rudolph, Naresh Solanki, linux-arm-kernel, linux-aspeed
From: Patrick Rudolph <patrick.rudolph@9elements.com>
Add a device tree for IBM sbp1 BMC board which is based on AST2600 SOC.
sbp1 baseboard has:
- support for up to four Sapphire Rapids sockets having 16 DIMMS each.
- 240 core/480 threads at maximum
- 32x CPU PCIe slots
- 2x M.2 PCH PCIe slots
- Dual 200Gbit/s NIC
- SPI TPM
Added the following:
- Indication LEDs
- I2C mux & GPIO controller, pin assignments,
- Thermister,
- Voltage regulator
- EEPROM/VPD
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Signed-off-by: Naresh Solanki <Naresh.Solanki@9elements.com>
---
Changes in V6:
- Verified all regulators warning resolved.
- Remove interrupt property for mux which isn't applicable as reported
in CHECK_DTBS
Changes in V5:
- Update order in Makefile
- Remove regulator node for ir38xxx. Also removed interrupt related
properties which aren't related to ir38xxx.
Changes in V4:
- Move reset related entried under mdio to phy.
- Removed reserved gpio range.
Changes in V3:
- Drop unused regulator entries which are not used by drivers.
- Decouple p12v_a
- Update pincfg for U62120
---
arch/arm/boot/dts/aspeed/Makefile | 1 +
.../boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dts | 6086 +++++++++++++++++
2 files changed, 6087 insertions(+)
create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dts
diff --git a/arch/arm/boot/dts/aspeed/Makefile b/arch/arm/boot/dts/aspeed/Makefile
index c4f064e4b073..e7b558c2310a 100644
--- a/arch/arm/boot/dts/aspeed/Makefile
+++ b/arch/arm/boot/dts/aspeed/Makefile
@@ -40,6 +40,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
aspeed-bmc-ibm-rainier.dtb \
aspeed-bmc-ibm-rainier-1s4u.dtb \
aspeed-bmc-ibm-rainier-4u.dtb \
+ aspeed-bmc-ibm-sbp1.dtb \
aspeed-bmc-ibm-system1.dtb \
aspeed-bmc-intel-s2600wf.dtb \
aspeed-bmc-inspur-fp5280g2.dtb \
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dts
new file mode 100644
index 000000000000..8d98be3d5f2e
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dts
@@ -0,0 +1,6086 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright 2024 IBM Corp.
+/dts-v1/;
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/i2c/i2c.h>
+#include "aspeed-g6.dtsi"
+
+/ {
+ model = "IBM SBP1";
+ compatible = "ibm,sbp1-bmc", "aspeed,ast2600";
+
+ chosen {
+ stdout-path = &uart1;
+ };
+
+ memory@80000000 {
+ reg = <0x80000000 0x20000000>;
+ device_type = "memory";
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ gfx_memory: framebuffer {
+ size = <0x01000000>;
+ alignment = <0x01000000>;
+ compatible = "shared-dma-pool";
+ reusable;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led-power {
+ label = "LED_BMC_READY";
+ gpios = <&gpio0 ASPEED_GPIO(H, 1) GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_GREEN>;
+ default-state = "off";
+ retain-state-suspended;
+ panic-indicator;
+ };
+
+ led-id-tpm {
+ label = "LED_ID_TPM";
+ gpios = <&smb_pex_vr_ctrl 12 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_YELLOW>;
+ };
+
+ led-id-bat {
+ label = "LED_ID_BAT";
+ gpios = <&smb_pex_vr_ctrl 16 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_YELLOW>;
+ };
+
+ led-id-mgmt-port2 {
+ label = "LED_ID_MGMT_PORT2";
+ gpios = <&smb_pex_vr_ctrl 17 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_YELLOW>;
+ };
+
+ led-id-mgmt-port1 {
+ label = "LED_ID_MGMT_PORT1";
+ gpios = <&smb_pex_vr_ctrl 18 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_YELLOW>;
+ };
+
+ led-id-nic1-port1 {
+ label = "LED_ID_NIC1_PORT1";
+ gpios = <&smb_pex_vr_ctrl 22 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_YELLOW>;
+ };
+
+ led-id-nic1-port2 {
+ label = "LED_ID_NIC1_PORT2";
+ gpios = <&smb_pex_vr_ctrl 23 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_YELLOW>;
+ };
+
+ led-id-nic2-port1 {
+ label = "LED_ID_NIC2_PORT1";
+ gpios = <&smb_pex_vr_ctrl 24 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_YELLOW>;
+ };
+
+ led-id-nic2-port2 {
+ label = "LED_ID_NIC2_PORT2";
+ gpios = <&smb_pex_vr_ctrl 25 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_YELLOW>;
+ };
+
+ led-id-m2-ssd2 {
+ label = "LED_ID_M2_SSD2";
+ gpios = <&smb_pex_vr_ctrl 36 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_YELLOW>;
+ };
+
+ led-id-m2-ssd1 {
+ label = "LED_ID_M2_SSD1";
+ gpios = <&smb_pex_vr_ctrl 37 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_YELLOW>;
+ };
+
+ led-id-dwr-frnt-p {
+ label = "LED_ID_DWR_FRNT_P";
+ gpios = <&smb_svc_pex_cpu3_led 37 GPIO_ACTIVE_HIGH>;
+ color = <LED_COLOR_ID_BLUE>;
+
+ default-state = "on";
+ retain-state-suspended;
+ retain-state-shutdown;
+ };
+
+ led-pwr-dwr-frnt {
+ label = "LED_PWR_DWR_FRNT";
+ gpios = <&smb_svc_pex_cpu3_led 36 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_GREEN>;
+
+ retain-state-suspended;
+ retain-state-shutdown;
+ };
+
+ led-pwr-dwr-back {
+ label = "LED_PWR_DWR_BACK";
+ gpios = <&smb_pex_vr_ctrl 34 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_GREEN>;
+
+ retain-state-suspended;
+ retain-state-shutdown;
+ };
+
+ led-id-dwr-back-p {
+ label = "LED_ID_DWR_BACK_P";
+ gpios = <&smb_pex_vr_ctrl 35 GPIO_ACTIVE_HIGH>;
+ color = <LED_COLOR_ID_BLUE>;
+
+ default-state = "on";
+ retain-state-suspended;
+ retain-state-shutdown;
+ };
+
+ led-id-cpu0 {
+ label = "LED_ID_CPU0";
+ gpios = <&smb_svc_pex_cpu0_led 39 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_YELLOW>;
+ };
+
+ led-id-cpu1 {
+ label = "LED_ID_CPU1";
+ gpios = <&smb_svc_pex_cpu1_led 39 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_YELLOW>;
+ };
+
+ led-id-cpu2 {
+ label = "LED_ID_CPU2";
+ gpios = <&smb_svc_pex_cpu2_led 39 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_YELLOW>;
+ };
+
+ led-id-cpu3 {
+ label = "LED_ID_CPU3";
+ gpios = <&smb_svc_pex_cpu3_led 39 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_YELLOW>;
+ };
+
+ led-id-dimm-c0e2 {
+ label = "LED_ID_DIMM_C0E2";
+ gpios = <&smb_svc_pex_cpu0_led 20 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_YELLOW>;
+ };
+
+ led-id-dimm-c0e1 {
+ label = "LED_ID_DIMM_C0E1";
+ gpios = <&smb_svc_pex_cpu0_led 21 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_YELLOW>;
+ };
+
+ led-id-dimm-c0f2 {
+ label = "LED_ID_DIMM_C0F2";
+ gpios = <&smb_svc_pex_cpu0_led 22 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_YELLOW>;
+ };
+
+ led-id-dimm-c0f1 {
+ label = "LED_ID_DIMM_C0F1";
+ gpios = <&smb_svc_pex_cpu0_led 23 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_YELLOW>;
+ };
+
+ led-id-dimm-c0g2 {
+ label = "LED_ID_DIMM_C0G2";
+ gpios = <&smb_svc_pex_cpu0_led 24 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_YELLOW>;
+ };
+
+ led-id-dimm-c0g1 {
+ label = "LED_ID_DIMM_C0G1";
+ gpios = <&smb_svc_pex_cpu0_led 25 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_YELLOW>;
+ };
+
+ led-id-dimm-c0h2 {
+ label = "LED_ID_DIMM_C0H2";
+ gpios = <&smb_svc_pex_cpu0_led 26 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_YELLOW>;
+ };
+
+ led-id-dimm-c0h1 {
+ label = "LED_ID_DIMM_C0H1";
+ gpios = <&smb_svc_pex_cpu0_led 27 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_YELLOW>;
+ };
+
+ led-id-dimm-c0a2 {
+ label = "LED_ID_DIMM_C0A2";
+ gpios = <&smb_svc_pex_cpu0_led 28 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_YELLOW>;
+ };
+
+ led-id-dimm-c0a1 {
+ label = "LED_ID_DIMM_C0A1";
+ gpios = <&smb_svc_pex_cpu0_led 29 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_YELLOW>;
+ };
+
+ led-id-dimm-c0b2 {
+ label = "LED_ID_DIMM_C0B2";
+ gpios = <&smb_svc_pex_cpu0_led 30 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_YELLOW>;
+ };
+
+ led-id-dimm-c0b1 {
+ label = "LED_ID_DIMM_C0B1";
+ gpios = <&smb_svc_pex_cpu0_led 31 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_YELLOW>;
+ };
+
+ led-id-dimm-c0c2 {
+ label = "LED_ID_DIMM_C0C2";
+ gpios = <&smb_svc_pex_cpu0_led 32 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_YELLOW>;
+ };
+
+ led-id-dimm-c0c1 {
+ label = "LED_ID_DIMM_C0C1";
+ gpios = <&smb_svc_pex_cpu0_led 33 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_YELLOW>;
+ };
+
+ led-id-dimm-c0d2 {
+ label = "LED_ID_DIMM_C0D2";
+ gpios = <&smb_svc_pex_cpu0_led 34 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_YELLOW>;
+ };
+
+ led-id-dimm-c0d1 {
+ label = "LED_ID_DIMM_C0D1";
+ gpios = <&smb_svc_pex_cpu0_led 35 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_YELLOW>;
+ };
+
+ led-id-dimm-c1e2 {
+ label = "LED_ID_DIMM_C1E2";
+ gpios = <&smb_svc_pex_cpu1_led 20 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_YELLOW>;
+ };
+
+ led-id-dimm-c1e1 {
+ label = "LED_ID_DIMM_C1E1";
+ gpios = <&smb_svc_pex_cpu1_led 21 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_YELLOW>;
+ };
+
+ led-id-dimm-c1f2 {
+ label = "LED_ID_DIMM_C1F2";
+ gpios = <&smb_svc_pex_cpu1_led 22 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_YELLOW>;
+ };
+
+ led-id-dimm-c1f1 {
+ label = "LED_ID_DIMM_C1F1";
+ gpios = <&smb_svc_pex_cpu1_led 23 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_YELLOW>;
+ };
+
+ led-id-dimm-c1g2 {
+ label = "LED_ID_DIMM_C1G2";
+ gpios = <&smb_svc_pex_cpu1_led 24 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_YELLOW>;
+ };
+
+ led-id-dimm-c1g1 {
+ label = "LED_ID_DIMM_C1G1";
+ gpios = <&smb_svc_pex_cpu1_led 25 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_YELLOW>;
+ };
+
+ led-id-dimm-c1h2 {
+ label = "LED_ID_DIMM_C1H2";
+ gpios = <&smb_svc_pex_cpu1_led 26 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_YELLOW>;
+ };
+
+ led-id-dimm-c1h1 {
+ label = "LED_ID_DIMM_C1H1";
+ gpios = <&smb_svc_pex_cpu1_led 27 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_YELLOW>;
+ };
+
+ led-id-dimm-c1a2 {
+ label = "LED_ID_DIMM_C1A2";
+ gpios = <&smb_svc_pex_cpu1_led 28 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_YELLOW>;
+ };
+
+ led-id-dimm-c1a1 {
+ label = "LED_ID_DIMM_C1A1";
+ gpios = <&smb_svc_pex_cpu1_led 29 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_YELLOW>;
+ };
+
+ led-id-dimm-c1b2 {
+ label = "LED_ID_DIMM_C1B2";
+ gpios = <&smb_svc_pex_cpu1_led 30 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_YELLOW>;
+ };
+
+ led-id-dimm-c1b1 {
+ label = "LED_ID_DIMM_C1B1";
+ gpios = <&smb_svc_pex_cpu1_led 31 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_YELLOW>;
+ };
+
+ led-id-dimm-c1c2 {
+ label = "LED_ID_DIMM_C1C2";
+ gpios = <&smb_svc_pex_cpu1_led 32 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_YELLOW>;
+ };
+
+ led-id-dimm-c1c1 {
+ label = "LED_ID_DIMM_C1C1";
+ gpios = <&smb_svc_pex_cpu1_led 33 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_YELLOW>;
+ };
+
+ led-id-dimm-c1d2 {
+ label = "LED_ID_DIMM_C1D2";
+ gpios = <&smb_svc_pex_cpu1_led 34 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_YELLOW>;
+ };
+
+ led-id-dimm-c1d1 {
+ label = "LED_ID_DIMM_C1D1";
+ gpios = <&smb_svc_pex_cpu1_led 35 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_YELLOW>;
+ };
+
+ led-id-dimm-c2e2 {
+ label = "LED_ID_DIMM_C2E2";
+ gpios = <&smb_svc_pex_cpu2_led 20 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_YELLOW>;
+ };
+
+ led-id-dimm-c2e1 {
+ label = "LED_ID_DIMM_C2E1";
+ gpios = <&smb_svc_pex_cpu2_led 21 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_YELLOW>;
+ };
+
+ led-id-dimm-c2f2 {
+ label = "LED_ID_DIMM_C2F2";
+ gpios = <&smb_svc_pex_cpu2_led 22 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_YELLOW>;
+ };
+
+ led-id-dimm-c2f1 {
+ label = "LED_ID_DIMM_C2F1";
+ gpios = <&smb_svc_pex_cpu2_led 23 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_YELLOW>;
+ };
+
+ led-id-dimm-c2g2 {
+ label = "LED_ID_DIMM_C2G2";
+ gpios = <&smb_svc_pex_cpu2_led 24 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_YELLOW>;
+ };
+
+ led-id-dimm-c2g1 {
+ label = "LED_ID_DIMM_C2G1";
+ gpios = <&smb_svc_pex_cpu2_led 25 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_YELLOW>;
+ };
+
+ led-id-dimm-c2h2 {
+ label = "LED_ID_DIMM_C2H2";
+ gpios = <&smb_svc_pex_cpu2_led 26 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_YELLOW>;
+ };
+
+ led-id-dimm-c2h1 {
+ label = "LED_ID_DIMM_C2H1";
+ gpios = <&smb_svc_pex_cpu2_led 27 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_YELLOW>;
+ };
+
+ led-id-dimm-c2a2 {
+ label = "LED_ID_DIMM_C2A2";
+ gpios = <&smb_svc_pex_cpu2_led 28 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_YELLOW>;
+ };
+
+ led-id-dimm-c2a1 {
+ label = "LED_ID_DIMM_C2A1";
+ gpios = <&smb_svc_pex_cpu2_led 29 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_YELLOW>;
+ };
+
+ led-id-dimm-c2b2 {
+ label = "LED_ID_DIMM_C2B2";
+ gpios = <&smb_svc_pex_cpu2_led 30 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_YELLOW>;
+ };
+
+ led-id-dimm-c2b1 {
+ label = "LED_ID_DIMM_C2B1";
+ gpios = <&smb_svc_pex_cpu2_led 31 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_YELLOW>;
+ };
+
+ led-id-dimm-c2c2 {
+ label = "LED_ID_DIMM_C2C2";
+ gpios = <&smb_svc_pex_cpu2_led 32 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_YELLOW>;
+ };
+
+ led-id-dimm-c2c1 {
+ label = "LED_ID_DIMM_C2C1";
+ gpios = <&smb_svc_pex_cpu2_led 33 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_YELLOW>;
+ };
+
+ led-id-dimm-c2d2 {
+ label = "LED_ID_DIMM_C2D2";
+ gpios = <&smb_svc_pex_cpu2_led 34 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_YELLOW>;
+ };
+
+ led-id-dimm-c2d1 {
+ label = "LED_ID_DIMM_C2D1";
+ gpios = <&smb_svc_pex_cpu2_led 35 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_YELLOW>;
+ };
+
+ led-id-dimm-c3e2 {
+ label = "LED_ID_DIMM_C3E2";
+ gpios = <&smb_svc_pex_cpu3_led 20 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_YELLOW>;
+ };
+
+ led-id-dimm-c3e1 {
+ label = "LED_ID_DIMM_C3E1";
+ gpios = <&smb_svc_pex_cpu3_led 21 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_YELLOW>;
+ };
+
+ led-id-dimm-c3f2 {
+ label = "LED_ID_DIMM_C3F2";
+ gpios = <&smb_svc_pex_cpu3_led 22 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_YELLOW>;
+ };
+
+ led-id-dimm-c3f1 {
+ label = "LED_ID_DIMM_C3F1";
+ gpios = <&smb_svc_pex_cpu3_led 23 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_YELLOW>;
+ };
+
+ led-id-dimm-c3g2 {
+ label = "LED_ID_DIMM_C3G2";
+ gpios = <&smb_svc_pex_cpu3_led 24 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_YELLOW>;
+ };
+
+ led-id-dimm-c3g1 {
+ label = "LED_ID_DIMM_C3G1";
+ gpios = <&smb_svc_pex_cpu3_led 25 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_YELLOW>;
+ };
+
+ led-id-dimm-c3h2 {
+ label = "LED_ID_DIMM_C3H2";
+ gpios = <&smb_svc_pex_cpu3_led 26 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_YELLOW>;
+ };
+
+ led-id-dimm-c3h1 {
+ label = "LED_ID_DIMM_C3H1";
+ gpios = <&smb_svc_pex_cpu3_led 27 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_YELLOW>;
+ };
+
+ led-id-dimm-c3a2 {
+ label = "LED_ID_DIMM_C3A2";
+ gpios = <&smb_svc_pex_cpu3_led 28 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_YELLOW>;
+ };
+
+ led-id-dimm-c3a1 {
+ label = "LED_ID_DIMM_C3A1";
+ gpios = <&smb_svc_pex_cpu3_led 29 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_YELLOW>;
+ };
+
+ led-id-dimm-c3b2 {
+ label = "LED_ID_DIMM_C3B2";
+ gpios = <&smb_svc_pex_cpu3_led 30 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_YELLOW>;
+ };
+
+ led-id-dimm-c3b1 {
+ label = "LED_ID_DIMM_C3B1";
+ gpios = <&smb_svc_pex_cpu3_led 31 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_YELLOW>;
+ };
+
+ led-id-dimm-c3c2 {
+ label = "LED_ID_DIMM_C3C2";
+ gpios = <&smb_svc_pex_cpu3_led 32 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_YELLOW>;
+ };
+
+ led-id-dimm-c3c1 {
+ label = "LED_ID_DIMM_C3C1";
+ gpios = <&smb_svc_pex_cpu3_led 33 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_YELLOW>;
+ };
+
+ led-id-dimm-c3d2 {
+ label = "LED_ID_DIMM_C3D2";
+ gpios = <&smb_svc_pex_cpu3_led 34 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_YELLOW>;
+ };
+
+ led-id-dimm-c3d1 {
+ label = "LED_ID_DIMM_C3D1";
+ gpios = <&smb_svc_pex_cpu3_led 35 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_YELLOW>;
+ };
+
+ led-id-dimm-rssd01 {
+ label = "LED_ID_RSSD01";
+ gpios = <&smb_svc_pex_rssd01_16 0 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_YELLOW>;
+ };
+
+ led-id-dimm-rssd02 {
+ label = "LED_ID_RSSD02";
+ gpios = <&smb_svc_pex_rssd01_16 1 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_YELLOW>;
+ };
+
+ led-id-dimm-rssd03 {
+ label = "LED_ID_RSSD03";
+ gpios = <&smb_svc_pex_rssd01_16 2 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_YELLOW>;
+ };
+
+ led-id-dimm-rssd04 {
+ label = "LED_ID_RSSD04";
+ gpios = <&smb_svc_pex_rssd01_16 3 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_YELLOW>;
+ };
+
+ led-id-dimm-rssd05 {
+ label = "LED_ID_RSSD05";
+ gpios = <&smb_svc_pex_rssd01_16 4 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_YELLOW>;
+ };
+
+ led-id-dimm-rssd06 {
+ label = "LED_ID_RSSD06";
+ gpios = <&smb_svc_pex_rssd01_16 5 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_YELLOW>;
+ };
+
+ led-id-dimm-rssd07 {
+ label = "LED_ID_RSSD07";
+ gpios = <&smb_svc_pex_rssd01_16 6 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_YELLOW>;
+ };
+
+ led-id-dimm-rssd08 {
+ label = "LED_ID_RSSD08";
+ gpios = <&smb_svc_pex_rssd01_16 7 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_YELLOW>;
+ };
+
+ led-id-dimm-rssd09 {
+ label = "LED_ID_RSSD09";
+ gpios = <&smb_svc_pex_rssd01_16 8 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_YELLOW>;
+ };
+
+ led-id-dimm-rssd10 {
+ label = "LED_ID_RSSD10";
+ gpios = <&smb_svc_pex_rssd01_16 9 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_YELLOW>;
+ };
+
+ led-id-dimm-rssd11 {
+ label = "LED_ID_RSSD11";
+ gpios = <&smb_svc_pex_rssd01_16 10 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_YELLOW>;
+ };
+
+ led-id-dimm-rssd12 {
+ label = "LED_ID_RSSD12";
+ gpios = <&smb_svc_pex_rssd01_16 11 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_YELLOW>;
+ };
+
+ led-id-dimm-rssd13 {
+ label = "LED_ID_RSSD13";
+ gpios = <&smb_svc_pex_rssd01_16 12 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_YELLOW>;
+ };
+
+ led-id-dimm-rssd14 {
+ label = "LED_ID_RSSD14";
+ gpios = <&smb_svc_pex_rssd01_16 13 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_YELLOW>;
+ };
+
+ led-id-dimm-rssd15 {
+ label = "LED_ID_RSSD15";
+ gpios = <&smb_svc_pex_rssd01_16 14 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_YELLOW>;
+ };
+
+ led-id-dimm-rssd16 {
+ label = "LED_ID_RSSD16";
+ gpios = <&smb_svc_pex_rssd01_16 15 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_YELLOW>;
+ };
+
+ led-id-dimm-rssd17 {
+ label = "LED_ID_RSSD17";
+ gpios = <&smb_svc_pex_rssd17_32 0 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_YELLOW>;
+ };
+
+ led-id-dimm-rssd18 {
+ label = "LED_ID_RSSD18";
+ gpios = <&smb_svc_pex_rssd17_32 1 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_YELLOW>;
+ };
+
+ led-id-dimm-rssd19 {
+ label = "LED_ID_RSSD19";
+ gpios = <&smb_svc_pex_rssd17_32 2 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_YELLOW>;
+ };
+
+ led-id-dimm-rssd20 {
+ label = "LED_ID_RSSD20";
+ gpios = <&smb_svc_pex_rssd17_32 3 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_YELLOW>;
+ };
+
+ led-id-dimm-rssd21 {
+ label = "LED_ID_RSSD21";
+ gpios = <&smb_svc_pex_rssd17_32 4 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_YELLOW>;
+ };
+
+ led-id-dimm-rssd22 {
+ label = "LED_ID_RSSD22";
+ gpios = <&smb_svc_pex_rssd17_32 5 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_YELLOW>;
+ };
+
+ led-id-dimm-rssd23 {
+ label = "LED_ID_RSSD23";
+ gpios = <&smb_svc_pex_rssd17_32 6 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_YELLOW>;
+ };
+
+ led-id-dimm-rssd24 {
+ label = "LED_ID_RSSD24";
+ gpios = <&smb_svc_pex_rssd17_32 7 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_YELLOW>;
+ };
+
+ led-id-dimm-rssd25 {
+ label = "LED_ID_RSSD25";
+ gpios = <&smb_svc_pex_rssd17_32 8 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_YELLOW>;
+ };
+
+ led-id-dimm-rssd26 {
+ label = "LED_ID_RSSD26";
+ gpios = <&smb_svc_pex_rssd17_32 9 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_YELLOW>;
+ };
+
+ led-id-dimm-rssd27 {
+ label = "LED_ID_RSSD27";
+ gpios = <&smb_svc_pex_rssd17_32 10 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_YELLOW>;
+ };
+
+ led-id-dimm-rssd28 {
+ label = "LED_ID_RSSD28";
+ gpios = <&smb_svc_pex_rssd17_32 11 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_YELLOW>;
+ };
+
+ led-id-dimm-rssd29 {
+ label = "LED_ID_RSSD29";
+ gpios = <&smb_svc_pex_rssd17_32 12 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_YELLOW>;
+ };
+
+ led-id-dimm-rssd30 {
+ label = "LED_ID_RSSD30";
+ gpios = <&smb_svc_pex_rssd17_32 13 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_YELLOW>;
+ };
+
+ led-id-dimm-rssd31 {
+ label = "LED_ID_RSSD31";
+ gpios = <&smb_svc_pex_rssd17_32 14 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_YELLOW>;
+ };
+
+ led-id-dimm-rssd32 {
+ label = "LED_ID_RSSD32";
+ gpios = <&smb_svc_pex_rssd17_32 15 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_YELLOW>;
+ };
+
+ led-id-fan-asm01 {
+ label = "LED_ID_FAN_ASM01";
+ gpios = <&smb_svc_pex_rssd01_16 32 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_YELLOW>;
+ };
+
+ led-id-fan-asm02 {
+ label = "LED_ID_FAN_ASM02";
+ gpios = <&smb_svc_pex_rssd01_16 33 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_YELLOW>;
+ };
+
+ led-id-fan-asm03 {
+ label = "LED_ID_FAN_ASM03";
+ gpios = <&smb_svc_pex_rssd01_16 34 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_YELLOW>;
+ };
+
+ led-id-fan-asm04 {
+ label = "LED_ID_FAN_ASM04";
+ gpios = <&smb_svc_pex_rssd01_16 35 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_YELLOW>;
+ };
+
+ led-id-fan-asm05 {
+ label = "LED_ID_FAN_ASM05";
+ gpios = <&smb_svc_pex_rssd01_16 36 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_YELLOW>;
+ };
+
+ led-id-fan-asm06 {
+ label = "LED_ID_FAN_ASM06";
+ gpios = <&smb_svc_pex_rssd01_16 37 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_YELLOW>;
+ };
+
+ led-id-fan-asm07 {
+ label = "LED_ID_FAN_ASM07";
+ gpios = <&smb_svc_pex_rssd17_32 32 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_YELLOW>;
+ };
+
+ led-id-fan-asm08 {
+ label = "LED_ID_FAN_ASM08";
+ gpios = <&smb_svc_pex_rssd17_32 33 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_YELLOW>;
+ };
+
+ led-id-fan-asm09 {
+ label = "LED_ID_FAN_ASM09";
+ gpios = <&smb_svc_pex_rssd17_32 34 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_YELLOW>;
+ };
+
+ led-id-fan-asm10 {
+ label = "LED_ID_FAN_ASM10";
+ gpios = <&smb_svc_pex_rssd17_32 35 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_YELLOW>;
+ };
+
+ led-id-fan-asm11 {
+ label = "LED_ID_FAN_ASM11";
+ gpios = <&smb_svc_pex_rssd17_32 36 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_YELLOW>;
+ };
+
+ led-id-fan-asm12 {
+ label = "LED_ID_FAN_ASM12";
+ gpios = <&smb_svc_pex_rssd17_32 37 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_YELLOW>;
+ };
+ };
+
+ iio-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&p12v_vd 0>, <&p5v_aux_vd 0>, <&p5v_bmc_aux_vd 0>, <&p3v3_aux_vd 0>,
+ <&p3v3_bmc_aux_vd 0>, <&p1v8_bmc_aux_vd 0>, <&adc1 4>, <&adc0 2>, <&adc1 0>,
+ <&p2V5_aux_vd 0>, <&p3v3_rtc_vd 0>;
+ };
+
+ p12v_vd: voltage-divider1 {
+ compatible = "voltage-divider";
+ io-channels = <&adc1 3>;
+ #io-channel-cells = <1>;
+
+ /*
+ * Scale the system voltage by 1127/127 to fit the ADC range.
+ * Use small nominator to prevent integer overflow.
+ */
+ output-ohms = <15>;
+ full-ohms = <133>;
+ };
+
+ p5v_aux_vd: voltage-divider2 {
+ compatible = "voltage-divider";
+ io-channels = <&adc1 5>;
+ #io-channel-cells = <1>;
+
+ /*
+ * Scale the system voltage by 1365/365 to fit the ADC range.
+ * Use small nominator to prevent integer overflow.
+ */
+ output-ohms = <50>;
+ full-ohms = <187>;
+ };
+
+ p5v_bmc_aux_vd: voltage-divider3 {
+ compatible = "voltage-divider";
+ io-channels = <&adc0 3>;
+ #io-channel-cells = <1>;
+
+ /*
+ * Scale the system voltage by 1365/365 to fit the ADC range.
+ * Use small nominator to prevent integer overflow.
+ */
+ output-ohms = <50>;
+ full-ohms = <187>;
+ };
+
+ p3v3_aux_vd: voltage-divider4 {
+ compatible = "voltage-divider";
+ io-channels = <&adc1 2>;
+ #io-channel-cells = <1>;
+
+ /*
+ * Scale the system voltage by 1698/698 to fit the ADC range.
+ * Use small nominator to prevent integer overflow.
+ */
+ output-ohms = <14>;
+ full-ohms = <34>;
+ };
+
+ p3v3_bmc_aux_vd: voltage-divider5 {
+ compatible = "voltage-divider";
+ io-channels = <&adc0 7>;
+ #io-channel-cells = <1>;
+
+ /*
+ * Scale the system voltage by 1698/698 to fit the ADC range.
+ * Use small nominator to prevent integer overflow.
+ */
+ output-ohms = <14>;
+ full-ohms = <34>;
+ };
+
+ p1v8_bmc_aux_vd: voltage-divider6 {
+ compatible = "voltage-divider";
+ io-channels = <&adc0 6>;
+ #io-channel-cells = <1>;
+
+ /*
+ * Scale the system voltage by 4000/3000 to fit the ADC range.
+ * Use small nominator to prevent integer overflow.
+ */
+ output-ohms = <3>;
+ full-ohms = <4>;
+ };
+
+ p2V5_aux_vd: voltage-divider7 {
+ compatible = "voltage-divider";
+ io-channels = <&adc1 1>;
+ #io-channel-cells = <1>;
+
+ /*
+ * Scale the system voltage by 2100/1100 to fit the ADC range.
+ * Use small nominator to prevent integer overflow.
+ */
+ output-ohms = <11>;
+ full-ohms = <21>;
+ };
+
+ p3v3_rtc_vd: voltage-divider8 {
+ compatible = "voltage-divider";
+ io-channels = <&adc1 7>;
+ #io-channel-cells = <1>;
+
+ /*
+ * Scale the system voltage by 231000/100000 to fit the ADC range.
+ * Use small nominator to prevent integer overflow.
+ */
+ output-ohms = <100>;
+ full-ohms = <231>;
+ };
+
+ thermistor0: thermistor-0 {
+ compatible = "epcos,b57891s0103";
+ pullup-uv = <3300000>;
+ pullup-ohm = <10000>;
+ pulldown-ohm = <0>;
+ io-channels = <&adc0 0>;
+ #thermal-sensor-cells = <0>;
+ };
+
+ thermistor1: thermistor-1 {
+ compatible = "epcos,b57891s0103";
+ pullup-uv = <3300000>;
+ pullup-ohm = <10000>;
+ pulldown-ohm = <0>;
+ io-channels = <&adc0 1>;
+ #thermal-sensor-cells = <0>;
+ };
+
+ thermistor2: thermistor-2 {
+ compatible = "epcos,b57891s0103";
+ pullup-uv = <3300000>;
+ pullup-ohm = <10000>;
+ pulldown-ohm = <0>;
+ io-channels = <&adc0 4>;
+ #thermal-sensor-cells = <0>;
+ };
+
+ thermistor3: thermistor-3 {
+ compatible = "epcos,b57891s0103";
+ pullup-uv = <3300000>;
+ pullup-ohm = <10000>;
+ pulldown-ohm = <0>;
+ io-channels = <&adc0 5>;
+ #thermal-sensor-cells = <0>;
+ };
+
+ p12v: fixedregulator-p12v {
+ compatible = "regulator-fixed";
+ regulator-name = "p12v";
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ p3v3_bmc_aux: fixedregulator-p3v3-bmc-aux {
+ compatible = "regulator-fixed";
+ regulator-name = "p3v3_bmc_aux";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ p1v8_bmc_aux: fixedregulator-p1v8-bmc-aux {
+ compatible = "regulator-fixed";
+ regulator-name = "p1v8_bmc_aux";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ p1v2_bmc_aux: fixedregulator-p1v2-bmc-aux {
+ compatible = "regulator-fixed";
+ regulator-name = "p1v2_bmc_aux";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ p12v-a-consumer {
+ compatible = "regulator-output";
+ vout-supply = <&p12v_a>;
+ };
+
+ p12v-b-consumer {
+ compatible = "regulator-output";
+ vout-supply = <&p12v_b>;
+ };
+
+ p12v-c-consumer {
+ compatible = "regulator-output";
+ vout-supply = <&p12v_c>;
+ };
+
+ p12v-d-consumer {
+ compatible = "regulator-output";
+ vout-supply = <&p12v_d>;
+ };
+
+ pvccinfaon-cpu0-consumer {
+ compatible = "regulator-output";
+ vout-supply = <&pvccinfaon_cpu0>;
+ };
+
+ pvccfa-ehv-cpu0-consumer {
+ compatible = "regulator-output";
+ vout-supply = <&pvccfa_ehv_cpu0>;
+ };
+
+ pvnn-main-cpu0-consumer {
+ compatible = "regulator-output";
+ vout-supply = <&pvnn_main_cpu0>;
+ };
+
+ pvccin-cpu0-consumer {
+ compatible = "regulator-output";
+ vout-supply = <&pvccin_cpu0>;
+ };
+
+ pvccfa-ehv-fivra-cpu0-consumer {
+ compatible = "regulator-output";
+ vout-supply = <&pvccfa_ehv_fivra_cpu0>;
+ };
+
+ pvccd-hv-cpu0-consumer {
+ compatible = "regulator-output";
+ vout-supply = <&pvccd_hv_cpu0>;
+ };
+
+ pvpp-hbm-cpu0-consumer {
+ compatible = "regulator-output";
+ vout-supply = <&pvpp_hbm_cpu0>;
+ };
+
+ pvccinfaon-cpu1-consumer {
+ compatible = "regulator-output";
+ vout-supply = <&pvccinfaon_cpu1>;
+ };
+
+ pvccfa-ehv-cpu1-consumer {
+ compatible = "regulator-output";
+ vout-supply = <&pvccfa_ehv_cpu1>;
+ };
+
+ pvnn-main-cpu1-consumer {
+ compatible = "regulator-output";
+ vout-supply = <&pvnn_main_cpu1>;
+ };
+
+ pvccin-cpu1-consumer {
+ compatible = "regulator-output";
+ vout-supply = <&pvccin_cpu1>;
+ };
+
+ pvccfa-ehv-fivra-cpu1-consumer {
+ compatible = "regulator-output";
+ vout-supply = <&pvccfa_ehv_fivra_cpu1>;
+ };
+
+ pvccd-hv-cpu1-consumer {
+ compatible = "regulator-output";
+ vout-supply = <&pvccd_hv_cpu1>;
+ };
+
+ pvpp-hbm-cpu1-consumer {
+ compatible = "regulator-output";
+ vout-supply = <&pvpp_hbm_cpu1>;
+ };
+
+ pvccinfaon-cpu2-consumer {
+ compatible = "regulator-output";
+ vout-supply = <&pvccinfaon_cpu2>;
+ };
+
+ pvccfa-ehv-cpu2-consumer {
+ compatible = "regulator-output";
+ vout-supply = <&pvccfa_ehv_cpu2>;
+ };
+
+ pvnn-main-cpu2-consumer {
+ compatible = "regulator-output";
+ vout-supply = <&pvnn_main_cpu2>;
+ };
+
+ pvccin-cpu2-consumer {
+ compatible = "regulator-output";
+ vout-supply = <&pvccin_cpu2>;
+ };
+
+ pvccfa-ehv-fivra-cpu2-consumer {
+ compatible = "regulator-output";
+ vout-supply = <&pvccfa_ehv_fivra_cpu2>;
+ };
+
+ pvccd-hv-cpu2-consumer {
+ compatible = "regulator-output";
+ vout-supply = <&pvccd_hv_cpu2>;
+ };
+
+ pvpp-hbm-cpu2-consumer {
+ compatible = "regulator-output";
+ vout-supply = <&pvpp_hbm_cpu2>;
+ };
+
+ pvccinfaon-cpu3-consumer {
+ compatible = "regulator-output";
+ vout-supply = <&pvccinfaon_cpu3>;
+ };
+
+ pvccfa-ehv-cpu3-consumer {
+ compatible = "regulator-output";
+ vout-supply = <&pvccfa_ehv_cpu3>;
+ };
+
+ pvnn-main-cpu3-consumer {
+ compatible = "regulator-output";
+ vout-supply = <&pvnn_main_cpu3>;
+ };
+
+ pvccin-cpu3-consumer {
+ compatible = "regulator-output";
+ vout-supply = <&pvccin_cpu3>;
+ };
+
+ pvccfa-ehv-fivra-cpu3-consumer {
+ compatible = "regulator-output";
+ vout-supply = <&pvccfa_ehv_fivra_cpu3>;
+ };
+
+ pvccd-hv-cpu3-consumer {
+ compatible = "regulator-output";
+ vout-supply = <&pvccd_hv_cpu3>;
+ };
+
+ pvpp-hbm-cpu3-consumer {
+ compatible = "regulator-output";
+ vout-supply = <&pvpp_hbm_cpu3>;
+ };
+
+ p1v05-pch-aux-consumer {
+ compatible = "regulator-output";
+ vout-supply = <&p1v05_pch_aux>;
+ };
+
+ p1v8-pch-aux-consumer {
+ compatible = "regulator-output";
+ vout-supply = <&p1v8_pch_aux>;
+ };
+
+ p3v3-pch-consumer {
+ compatible = "regulator-output";
+ vout-supply = <&p3v3_pch>;
+ };
+
+ p5v-consumer {
+ compatible = "regulator-output";
+ vout-supply = <&p5v>;
+ };
+
+ smb-m2-ssb-ssd2 {
+ compatible = "regulator-output";
+ vout-supply = <&sw0_smb_m2_ssb_ssd2>;
+ };
+
+ smb-m2-ssb-ssd1 {
+ compatible = "regulator-output";
+ vout-supply = <&sw0_smb_m2_ssb_ssd1>;
+ };
+
+ ssb-rssd01-sw0 {
+ compatible = "regulator-output";
+ vout-supply = <&sw0_ssb_rssd01>;
+ };
+
+ ssb-rssd01-sw1 {
+ compatible = "regulator-output";
+ vout-supply = <&sw1_ssb_rssd01>;
+ };
+
+ ssb-rssd02-sw0 {
+ compatible = "regulator-output";
+ vout-supply = <&sw0_ssb_rssd02>;
+ };
+
+ ssb-rssd02-sw1 {
+ compatible = "regulator-output";
+ vout-supply = <&sw1_ssb_rssd02>;
+ };
+
+ ssb-rssd03-sw0 {
+ compatible = "regulator-output";
+ vout-supply = <&sw0_ssb_rssd03>;
+ };
+
+ ssb-rssd03-sw1 {
+ compatible = "regulator-output";
+ vout-supply = <&sw1_ssb_rssd03>;
+ };
+
+ ssb-rssd04-sw0 {
+ compatible = "regulator-output";
+ vout-supply = <&sw0_ssb_rssd04>;
+ };
+
+ ssb-rssd04-sw1 {
+ compatible = "regulator-output";
+ vout-supply = <&sw1_ssb_rssd04>;
+ };
+
+ ssb-rssd05-sw0 {
+ compatible = "regulator-output";
+ vout-supply = <&sw0_ssb_rssd05>;
+ };
+
+ ssb-rssd05-sw1 {
+ compatible = "regulator-output";
+ vout-supply = <&sw1_ssb_rssd05>;
+ };
+
+ ssb-rssd06-sw0 {
+ compatible = "regulator-output";
+ vout-supply = <&sw0_ssb_rssd06>;
+ };
+
+ ssb-rssd06-sw1 {
+ compatible = "regulator-output";
+ vout-supply = <&sw1_ssb_rssd06>;
+ };
+
+ ssb-rssd07-sw0 {
+ compatible = "regulator-output";
+ vout-supply = <&sw0_ssb_rssd07>;
+ };
+
+ ssb-rssd07-sw1 {
+ compatible = "regulator-output";
+ vout-supply = <&sw1_ssb_rssd07>;
+ };
+
+ ssb-rssd08-sw0 {
+ compatible = "regulator-output";
+ vout-supply = <&sw0_ssb_rssd08>;
+ };
+
+ ssb-rssd08-sw1 {
+ compatible = "regulator-output";
+ vout-supply = <&sw1_ssb_rssd08>;
+ };
+
+ ssb-rssd09-sw0 {
+ compatible = "regulator-output";
+ vout-supply = <&sw0_ssb_rssd09>;
+ };
+
+ ssb-rssd09-sw1 {
+ compatible = "regulator-output";
+ vout-supply = <&sw1_ssb_rssd09>;
+ };
+
+ ssb-rssd10-sw0 {
+ compatible = "regulator-output";
+ vout-supply = <&sw0_ssb_rssd10>;
+ };
+
+ ssb-rssd10-sw1 {
+ compatible = "regulator-output";
+ vout-supply = <&sw1_ssb_rssd10>;
+ };
+
+ ssb-rssd11-sw0 {
+ compatible = "regulator-output";
+ vout-supply = <&sw0_ssb_rssd11>;
+ };
+
+ ssb-rssd11-sw1 {
+ compatible = "regulator-output";
+ vout-supply = <&sw1_ssb_rssd11>;
+ };
+
+ ssb-rssd12-sw0 {
+ compatible = "regulator-output";
+ vout-supply = <&sw0_ssb_rssd12>;
+ };
+
+ ssb-rssd12-sw1 {
+ compatible = "regulator-output";
+ vout-supply = <&sw1_ssb_rssd12>;
+ };
+
+ ssb-rssd13-sw0 {
+ compatible = "regulator-output";
+ vout-supply = <&sw0_ssb_rssd13>;
+ };
+
+ ssb-rssd13-sw1 {
+ compatible = "regulator-output";
+ vout-supply = <&sw1_ssb_rssd13>;
+ };
+
+ ssb-rssd14-sw0 {
+ compatible = "regulator-output";
+ vout-supply = <&sw0_ssb_rssd14>;
+ };
+
+ ssb-rssd14-sw1 {
+ compatible = "regulator-output";
+ vout-supply = <&sw1_ssb_rssd14>;
+ };
+
+ ssb-rssd15-sw0 {
+ compatible = "regulator-output";
+ vout-supply = <&sw0_ssb_rssd15>;
+ };
+
+ ssb-rssd15-sw1 {
+ compatible = "regulator-output";
+ vout-supply = <&sw1_ssb_rssd15>;
+ };
+
+ ssb-rssd16-sw0 {
+ compatible = "regulator-output";
+ vout-supply = <&sw0_ssb_rssd16>;
+ };
+
+ ssb-rssd16-sw1 {
+ compatible = "regulator-output";
+ vout-supply = <&sw1_ssb_rssd16>;
+ };
+
+ ssb-rssd17-sw0 {
+ compatible = "regulator-output";
+ vout-supply = <&sw0_ssb_rssd17>;
+ };
+
+ ssb-rssd17-sw1 {
+ compatible = "regulator-output";
+ vout-supply = <&sw1_ssb_rssd17>;
+ };
+
+ ssb-rssd18-sw0 {
+ compatible = "regulator-output";
+ vout-supply = <&sw0_ssb_rssd18>;
+ };
+
+ ssb-rssd18-sw1 {
+ compatible = "regulator-output";
+ vout-supply = <&sw1_ssb_rssd18>;
+ };
+
+ ssb-rssd19-sw0 {
+ compatible = "regulator-output";
+ vout-supply = <&sw0_ssb_rssd19>;
+ };
+
+ ssb-rssd19-sw1 {
+ compatible = "regulator-output";
+ vout-supply = <&sw1_ssb_rssd19>;
+ };
+
+ ssb-rssd20-sw0 {
+ compatible = "regulator-output";
+ vout-supply = <&sw0_ssb_rssd20>;
+ };
+
+ ssb-rssd20-sw1 {
+ compatible = "regulator-output";
+ vout-supply = <&sw1_ssb_rssd20>;
+ };
+
+ ssb-rssd21-sw0 {
+ compatible = "regulator-output";
+ vout-supply = <&sw0_ssb_rssd21>;
+ };
+
+ ssb-rssd21-sw1 {
+ compatible = "regulator-output";
+ vout-supply = <&sw1_ssb_rssd21>;
+ };
+
+ ssb-rssd22-sw0 {
+ compatible = "regulator-output";
+ vout-supply = <&sw0_ssb_rssd22>;
+ };
+
+ ssb-rssd22-sw1 {
+ compatible = "regulator-output";
+ vout-supply = <&sw1_ssb_rssd22>;
+ };
+
+ ssb-rssd23-sw0 {
+ compatible = "regulator-output";
+ vout-supply = <&sw0_ssb_rssd23>;
+ };
+
+ ssb-rssd23-sw1 {
+ compatible = "regulator-output";
+ vout-supply = <&sw1_ssb_rssd23>;
+ };
+
+ ssb-rssd24-sw0 {
+ compatible = "regulator-output";
+ vout-supply = <&sw0_ssb_rssd24>;
+ };
+
+ ssb-rssd24-sw1 {
+ compatible = "regulator-output";
+ vout-supply = <&sw1_ssb_rssd24>;
+ };
+
+ ssb-rssd25-sw0 {
+ compatible = "regulator-output";
+ vout-supply = <&sw0_ssb_rssd25>;
+ };
+
+ ssb-rssd25-sw1 {
+ compatible = "regulator-output";
+ vout-supply = <&sw1_ssb_rssd25>;
+ };
+
+ ssb-rssd26-sw0 {
+ compatible = "regulator-output";
+ vout-supply = <&sw0_ssb_rssd26>;
+ };
+
+ ssb-rssd26-sw1 {
+ compatible = "regulator-output";
+ vout-supply = <&sw1_ssb_rssd26>;
+ };
+
+ ssb-rssd27-sw0 {
+ compatible = "regulator-output";
+ vout-supply = <&sw0_ssb_rssd27>;
+ };
+
+ ssb-rssd27-sw1 {
+ compatible = "regulator-output";
+ vout-supply = <&sw1_ssb_rssd27>;
+ };
+
+ ssb-rssd28-sw0 {
+ compatible = "regulator-output";
+ vout-supply = <&sw0_ssb_rssd28>;
+ };
+
+ ssb-rssd28-sw1 {
+ compatible = "regulator-output";
+ vout-supply = <&sw1_ssb_rssd28>;
+ };
+
+ ssb-rssd29-sw0 {
+ compatible = "regulator-output";
+ vout-supply = <&sw0_ssb_rssd29>;
+ };
+
+ ssb-rssd29-sw1 {
+ compatible = "regulator-output";
+ vout-supply = <&sw1_ssb_rssd29>;
+ };
+
+ ssb-rssd30-sw0 {
+ compatible = "regulator-output";
+ vout-supply = <&sw0_ssb_rssd30>;
+ };
+
+ ssb-rssd30-sw1 {
+ compatible = "regulator-output";
+ vout-supply = <&sw1_ssb_rssd30>;
+ };
+
+ ssb-rssd31-sw0 {
+ compatible = "regulator-output";
+ vout-supply = <&sw0_ssb_rssd31>;
+ };
+
+ ssb-rssd31-sw1 {
+ compatible = "regulator-output";
+ vout-supply = <&sw1_ssb_rssd31>;
+ };
+
+ ssb-rssd32-sw0 {
+ compatible = "regulator-output";
+ vout-supply = <&sw0_ssb_rssd32>;
+ };
+
+ ssb-rssd32-sw1 {
+ compatible = "regulator-output";
+ vout-supply = <&sw1_ssb_rssd32>;
+ };
+
+ p3v3-nic-consumer {
+ compatible = "regulator-output";
+ vout-supply = <&p3v3_nic>;
+ };
+
+ p1v8-nic-consumer {
+ compatible = "regulator-output";
+ vout-supply = <&p1v8_nic>;
+ };
+
+ p1v2-nic-consumer {
+ compatible = "regulator-output";
+ vout-supply = <&p1v2_nic>;
+ };
+
+ pvcore-nic1-consumer {
+ compatible = "regulator-output";
+ vout-supply = <&pvcore_nic1>;
+ };
+
+ pvcore-nic2-consumer {
+ compatible = "regulator-output";
+ vout-supply = <&pvcore_nic2>;
+ };
+};
+
+&peci0 {
+ status = "okay";
+};
+
+&vuart1 {
+ status = "okay";
+};
+
+&lpc_snoop {
+ status = "okay";
+ snoop-ports = <0x80>, <0x81>;
+};
+
+&fmc {
+ status = "okay";
+ flash@0 {
+ status = "okay";
+ m25p,fast-read;
+ label = "bmc";
+ spi-tx-bus-width = <1>;
+ spi-rx-bus-width = <4>;
+#include "openbmc-flash-layout-64.dtsi"
+ };
+
+ flash@1 {
+ status = "okay";
+ m25p,fast-read;
+ label = "alt-bmc";
+ spi-tx-bus-width = <1>;
+ spi-rx-bus-width = <4>;
+#include "openbmc-flash-layout-64-alt.dtsi"
+ };
+};
+
+&uart1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_txd1_default
+ &pinctrl_rxd1_default
+ &pinctrl_nrts1_default
+ &pinctrl_ndtr1_default
+ &pinctrl_ndsr1_default
+ &pinctrl_ncts1_default
+ &pinctrl_ndcd1_default
+ &pinctrl_nri1_default>;
+};
+
+&uart5 {
+ status = "disabled";
+};
+
+&gpio1 {
+ status = "disabled";
+};
+
+&video {
+ status = "okay";
+};
+
+&vhub {
+ status = "okay";
+};
+
+&pinctrl {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_vgahs_default &pinctrl_vgavs_default>;
+};
+
+&mdio2 {
+ status = "okay";
+
+ ethphy2: ethernet-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0>;
+ reset-gpios = <&gpio0 ASPEED_GPIO(V, 7) GPIO_ACTIVE_LOW>;
+ reset-assert-us = <10000>;
+ reset-deassert-us = <300>;
+ };
+};
+
+&mdio3 {
+ status = "okay";
+
+ ethphy3: ethernet-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0>;
+ reset-gpios = <&gpio0 ASPEED_GPIO(G, 2) GPIO_ACTIVE_LOW>;
+ reset-assert-us = <10000>;
+ reset-deassert-us = <300>;
+ };
+};
+
+&mac2 {
+ status = "okay";
+
+ phy-mode = "rgmii";
+ phy-handle = <ðphy2>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rgmii3_default>;
+};
+
+&mac3 {
+ status = "okay";
+
+ phy-mode = "rgmii";
+ phy-handle = <ðphy3>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rgmii4_default>;
+};
+
+&adc0 {
+ status = "okay";
+ vref-supply = <&p1v8_bmc_aux>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_adc0_default
+ &pinctrl_adc1_default
+ &pinctrl_adc2_default
+ &pinctrl_adc3_default
+ &pinctrl_adc4_default
+ &pinctrl_adc5_default
+ &pinctrl_adc6_default
+ &pinctrl_adc7_default>;
+};
+
+&adc1 {
+ status = "okay";
+ vref-supply = <&p1v8_bmc_aux>;
+ aspeed,battery-sensing;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_adc8_default
+ &pinctrl_adc9_default
+ &pinctrl_adc10_default
+ &pinctrl_adc11_default
+ &pinctrl_adc12_default
+ &pinctrl_adc13_default
+ &pinctrl_adc15_default>;
+};
+
+&kcs3 {
+ status = "okay";
+ aspeed,lpc-io-reg = <0xca2>;
+};
+
+&gpio0 {
+ status = "okay";
+ gpio-line-names =
+ /* A0 - A7 */
+ "", "", "", "", "", "", "", "",
+ /* B0 - B7 */
+ "", "", "FM_ADR_TRIGGER_R_N", "RST_PLTRST_BUF_N", "BMC_TPM_RESET_N", "BMC_TPM_IRQ_N",
+ "PCH_TPM_RESET_N", "PCH_TPM_IRQ_N",
+ /* C0 - C7 */
+ "", "", "", "", "", "", "", "",
+ /* D0 - D7 */
+ "", "", "", "", "", "", "", "",
+ /* E0 - E7 */
+ "", "", "", "", "", "", "", "",
+ /* F0 - F7 */
+ "", "", "", "BMC_MUX_CPU1_RST_INT_N", "BMC_MUX_CPU2_RST_INT_N", "", "", "",
+ /* G0 - G7 */
+ "FM_SSD_CLK_DRVR1_EN", "FM_CK440Q_DEV_EN", "BMC_MAC1_RESET_N", "FM_DB2000_DEV_EN",
+ "FM_CPU_RMCA_LVT3_N", "FM_CPU_CATERR_LVT3_N", "FM_DBP_PRESENT_N", "",
+ /* H0 - H7 */
+ "SMB_SVC_PEX_RSSD17_32_INT", "LED_BMC_RDY", "RST_DBP_N", "", "", "", "", "",
+ /* I0 - I7 */
+ "JTAG_MUX_MODE_SEL", "JTAG_MUX_TRANS_ENBL", "JTAG_MUX_LSP_SEL5", "JTAG_MUX_MSTR_SEL",
+ "JTAG_MUX_LSP_SEL3", "", "JTAG_MUX_ENBL_N", "JTAG_MUX_RST_N",
+ /* J0 - J7 */
+ "", "", "", "", "", "", "", "",
+ /* K0 - K7 */
+ "", "", "", "", "", "", "", "",
+ /* L0 - L7 */
+ "", "", "", "", "RST_RTCRST_N", "RST_SRTCRST_N", "", "",
+ /* M0 - M7 */
+ "BMC_UART1_CTS_N", "BMC_UART1_DCD_N", "BMC_UART1_DSR_N", "BMC_UART1_RI_N",
+ "BMC_UART1_DTR_N", "BMC_UART1_RTS_N", "", "",
+ /* N0 - N7 */
+ "IRQ_BMC_PCH_NMI", "", "FM_PCH_BMC_THERMTRIP_N", "FM_BIOS_POST_CMPLT_N", "RST_PLTRST_N",
+ "FM_FLASH_SEC_OVRD", "FM_SMI_ACTIVE_N", "PWRGD_DBP",
+ /* O0 - O7 */
+ "CATERR_CPU2_EN", "H_LVT1_THERMTRIP_N", "CATERR_CPU3_EN", "SMB_SVC_PEX_CPU0_LED_INT",
+ "H_LVT1_MEMTRIP_N", "", "CATERR_CPU1_EN", "FM_PCH_ADR_COMPLETE_N",
+ /* P0 - P7 */
+ "PWRGD_SYS_PWROK", "PWRGD_PCH_PWROK", "BMC_MUX_CPU3_RST_INT_N", "BMC_MUX_SVC_RSSD_INT",
+ "FM_SLPS4_N", "IRQ_SML0_ALERT_N", "FM_SLPS3_N", "LED_BMC_HB",
+ /* Q0 - Q7 */
+ "", "PEX_BMC_RST", "PEX_VR_CTRL_RST", "PEX_NIC_RST", "PEX_CPU0_LED_RST", "PEX_CPU1_LED_RST",
+ "PEX_CPU2_LED_RST", "PEX_CPU3_LED_RST",
+ /* R0 - R7 */
+ "BMC_MUX_FANSSB_RSSD17_32_RST_INT_N", "BMC_MUX_FANPWM_RSSD01_16_RST_INT_N",
+ "BMC_MUX_SVC_VR_RST_INT_N", "BMC_MUX_NIC_RST_INT_N", "BMC_MUX_SVC_EXP_RST_INT_N",
+ "FM_CPU_ERR2_LVT3_N", "BMC_MUX_CPU0_RST_INT_N", "BMC_MUX_M2_RST_INT_N",
+ /* S0 - S7 */
+ "SMB_SVC_PEX_RSSD01_16_INT", "RST_PCH_RSMRST_R_N", "", "", "BMC_ROT_FPGA_RESET_N",
+ "FM_SSD_CLK_DRVR0_EN", "", "",
+ /* T0 - T7 */
+ "", "", "", "", "", "", "", "",
+ /* U0 - U7 */
+ "", "", "", "", "", "", "", "",
+ /* V0 - V7 */
+ "BMC_PEX_IRQ_INT", "RTC_BATT_TEST", "SMB_PEX_VR_CTRL_INT", "SMB_SVC_PEX_CPU3_LED_INT",
+ "PWRGD_CPUPWRGD", "SMB_SVC_PEX_CPU2_LED_INT", "SMB_SVC_PEX_CPU1_LED_INT",
+ "BMC_MAC0_RESET_N",
+ /* W0 - W7 */
+ "", "", "", "", "", "", "", "",
+ /* X0 - X7 */
+ "", "", "", "", "", "", "", "",
+ /* Y0 - Y7 */
+ "FM_THROTTLE_N", "FM_PASSWORD_CLEAR_N", "H_LVT3_CATERR_DLY_N", "FM_CPU_OL_INT_R_N", "", "",
+ "", "",
+ /* Z0 - Z7 */
+ "FM_CPU_ERR0_LVT3_N", "FM_CPU_ERR1_LVT3_N", "BMC_MUX_VR_PCH_CPU_RST_INT_N",
+ "JTAG_MUX_LSP_SEL1", "", "JTAG_MUX_LSP_SEL4", "JTAG_MUX_LSP_SEL2", "";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio0_unbiased_default>;
+};
+
+&pinctrl {
+ pinctrl_gpio0_unbiased_default: gpio_default {
+ pins = "AB15", "AD14", "R23", "A18", "AD24", "AD15", "AE14", "AC15", "U25", "AA24",
+ "V24", "W26", "AA23", "V26", "U24", "V25", "AE15", "C15", "F15";
+ bias-disable;
+ };
+};
+
+&i2c1 {
+ status = "okay";
+
+ bmc_mux_nic: mux@77 {
+ compatible = "maxim,max7357";
+ reg = <0x77>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reset-gpios = <&gpio0 ASPEED_GPIO(R, 3) (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+ vdd-supply = <&p3v3_aux>;
+
+ i2c@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ smb_pex_nic: pinctrl@20 {
+ compatible = "cypress,cy8c9540";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-parent = <&smb_pex_vr_ctrl>;
+ interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ vdd-supply = <&p3v3_aux>;
+ reset-gpios = <&gpio0 ASPEED_GPIO(Q, 3) GPIO_ACTIVE_HIGH>;
+
+ gpio-reserved-ranges = <19 1>, <22 6>, <30 6>, <38 2>;
+
+ gpio-line-names =
+ /* GPORT0 */
+ "IRQ_NIC2_OVT_WRNG", "FM_NIC2_ALLSTANDBY_N", "IRQ_NIC2_OVT_SHTDN",
+ "SMB_VR_PVCORE_NIC2_ALERT_N", "FM_NIC2_PERST1_N",
+ "SMB_NIC2_ALERT_N", "FM_NIC2_PERST3_N", "FM_NIC2_PERST2_N",
+ /* GPORT1 */
+ "FM_NIC1_RST_N", "FM_NIC1_PERST0_N", "FM_NIC1_PERST2_N",
+ "FM_NIC1_PERST3_N", "SMB_NIC1_ALERT_N", "FM_NIC1_PERST1_N",
+ "SMB_VR_PVCORE_NIC1_ALERT_N", "IRQ_NIC1_OVT_SHTDN",
+ /* GPORT2 */
+ "SMB_VR_P3V3_NIC_ALERT_N", "FM_NIC2_FLASH_PRSNT",
+ "FM_NIC1_FLASH_PRSNT", "",
+ /* GPORT3 */
+ "FM_NIC2_PERST0_N", "FM_NIC2_RST_N", "", "", "", "", "", "",
+ /* GPORT4 */
+ "FM_NIC1_ALLSTANDBY_N", "IRQ_NIC1_OVT_WRNG", "", "", "", "", "", "",
+ /* GPORT5 */
+ "SMB_VR_P1V8_NIC_ALERT_N", "SMB_VR_P1V2_NIC_ALERT_N", "", "";
+
+ pinctrl-0 = <&U62160_pins>;
+ pinctrl-names = "default";
+ U62160_pins: cfg-pins {
+ pins = "gp03", "gp16", "gp20", "gp50", "gp51";
+ function = "gpio";
+ input-enable;
+ bias-pull-up;
+ };
+ };
+ };
+
+ i2c@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c@2 {
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pvcore_nic2: ir38263-pvcore-nic2@40 {
+ compatible = "infineon,ir38263";
+ reg = <0x40>;
+
+ regulator-name = "pvcore_nic2";
+ regulator-enable-ramp-delay = <2000>;
+ vin-supply = <&p12v>;
+ };
+ };
+
+ i2c@3 {
+ reg = <3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pvcore_nic1: ir38263-pvcore-nic1@40 {
+ compatible = "infineon,ir38263";
+ reg = <0x40>;
+
+ regulator-name = "pvcore_nic1";
+ regulator-enable-ramp-delay = <2000>;
+ vin-supply = <&p12v>;
+ };
+ };
+
+ i2c@4 {
+ reg = <4>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c@5 {
+ reg = <5>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ p3v3_nic: ir38263-p3v3-nic@40 {
+ compatible = "infineon,ir38263";
+ reg = <0x40>;
+
+ regulator-name = "p3v3_nic";
+ regulator-enable-ramp-delay = <2000>;
+ vin-supply = <&p12v>;
+ };
+ };
+
+ i2c@6 {
+ reg = <6>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ p1v2_nic: ir38263-p1v2-nic@40 {
+ compatible = "infineon,ir38263";
+ reg = <0x40>;
+
+ regulator-name = "p1v2_nic";
+ regulator-enable-ramp-delay = <2000>;
+ vin-supply = <&p12v>;
+ };
+ };
+
+ i2c@7 {
+ reg = <7>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ p1v8_nic: ir38263-p1v8-nic@40 {
+ compatible = "infineon,ir38263";
+ reg = <0x40>;
+
+ regulator-name = "p1v8_nic";
+ regulator-enable-ramp-delay = <2000>;
+ vin-supply = <&p12v>;
+ };
+ };
+ };
+};
+
+&i2c2 {
+ status = "okay";
+};
+
+&i2c3 {
+ status = "okay";
+
+ i2cmux1: mux@77 {
+ compatible = "maxim,max7357";
+ reg = <0x77>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reset-gpios = <&gpio0 ASPEED_GPIO(R, 7) (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+ vdd-supply = <&p3v3_aux>;
+
+ i2c@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c@2 {
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c@3 {
+ reg = <3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ smb_m2_ssb_ssd1: regulator@3a {
+ compatible = "maxim,max5978";
+ reg = <0x3a>;
+ vss1-supply = <&p3v3_aux>;
+
+ interrupt-parent = <&smb_pex_vr_ctrl>;
+ interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
+ leds {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@0 {
+ reg = <0>;
+ label = "m2_ssb_ssd1:green:power";
+ default-state = "off";
+ };
+ };
+
+ regulators {
+ sw0_smb_m2_ssb_ssd1: sw0 {
+ shunt-resistor-micro-ohms = <12000>;
+ regulator-over-current-protection;
+ regulator-oc-protection-microamp = <2800000>;
+ regulator-name = "p3v3_m2_ssd1";
+ regulator-enable-ramp-delay = <10000>;
+ };
+ };
+ };
+ };
+
+ i2c@4 {
+ reg = <4>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c@5 {
+ reg = <5>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ smb_m2_ssb_ssd2: regulator@3a {
+ compatible = "maxim,max5978";
+ reg = <0x3a>;
+
+ interrupt-parent = <&smb_pex_vr_ctrl>;
+ interrupts = <39 IRQ_TYPE_LEVEL_LOW>;
+ vss1-supply = <&p3v3_aux>;
+ leds {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@0 {
+ reg = <0>;
+ label = "m2_ssb_ssd2:green:power";
+ default-state = "off";
+ };
+ };
+
+ regulators {
+ sw0_smb_m2_ssb_ssd2: sw0 {
+ shunt-resistor-micro-ohms = <12000>;
+ regulator-over-current-protection;
+ regulator-oc-protection-microamp = <2800000>;
+ regulator-name = "p3v3_m2_ssd2";
+ regulator-enable-ramp-delay = <10000>;
+ };
+ };
+ };
+ };
+
+ i2c@6 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c@7 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+};
+
+&i2c4 {
+ status = "okay";
+ multi-master;
+ bus-frequency = <1000000>;
+
+ bmc-slave@10 {
+ compatible = "ipmb-dev";
+ reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+
+ i2c-protocol;
+ };
+};
+
+&i2c5 {
+ status = "okay";
+
+ i2cmux2: mux@77 {
+ compatible = "maxim,max7357";
+ reg = <0x77>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reset-gpios = <&gpio0 ASPEED_GPIO(Z, 2) (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+ vdd-supply = <&p3v3_aux>;
+
+ i2c@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ p1v05_pch_aux: ir38263-p1v05-pch-aux@40 {
+ compatible = "infineon,ir38263";
+ reg = <0x40>;
+
+ regulator-name = "p1v05_pch_aux";
+ regulator-enable-ramp-delay = <2000>;
+ vin-supply = <&p12v>;
+ };
+ };
+
+ i2c@2 {
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ p1v8_pch_aux: ir38060-p1v8-pch-aux@40 {
+ compatible = "infineon,ir38060";
+ reg = <0x40>;
+
+ regulator-name = "p1v8_pch_aux";
+ regulator-enable-ramp-delay = <2000>;
+ vin-supply = <&p12v>;
+ };
+ };
+
+ i2c@4 {
+ reg = <4>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c@5 {
+ reg = <5>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c@6 {
+ reg = <6>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c@7 {
+ reg = <7>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+};
+
+&i2c14 {
+ status = "okay";
+
+ i2cmux13: mux@77 {
+ compatible = "maxim,max7357";
+ reg = <0x77>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reset-gpios = <&gpio0 ASPEED_GPIO(R, 6) (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+ vdd-supply = <&p3v3_aux>;
+
+ i2c@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ smb_pex_cpu0_event: pinctrl@20 {
+ compatible = "cypress,cy8c9540";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-parent = <&smb_pex_vr_ctrl>;
+ interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ vdd-supply = <&p3v3_aux>;
+ reset-gpios = <&smb_svc_pex_cpu0_led 16 GPIO_ACTIVE_HIGH>;
+
+ gpio-reserved-ranges = <14 2>, <21 1>, <25 3>, <33 1>;
+
+ gpio-line-names =
+ /* GPORT0 */
+ "PWRGD_CHD_CPU0", "PWRGD_CHC_CPU0",
+ "PWRGD_CHB_CPU0", "PWRGD_CHA_CPU0",
+ "PWRGD_CHE_CPU0", "PWRGD_CHF_CPU0",
+ "PWRGD_CHG_CPU0", "PWRGD_CHH_CPU0",
+ /* GPORT1 */
+ "SMB_VR_PVPP_HBM_CPU0_ALERT_N", "SMB_VR_PVCCINFAON_CPU0_ALERT_N",
+ "SMB_VR_PVNN_MAIN_CPU0_ALERT_N", "SMB_VR_PVCCD_HV_CPU0_ALERT_N",
+ "SMB_VR_PVCCIN_CPU0_ALERT_N", "SEL_SMB_DIMM_CPU0",
+ "", "",
+ /* GPORT2 */
+ "PWRGD_LVC3_CPU0_AB_DRAM_G", "PWRGD_LVC3_CPU0_CD_DRAM_G",
+ "PWRGD_LVC3_CPU0_EF_DRAM_G", "PWRGD_LVC3_CPU0_GH_DRAM_G",
+ /* GPORT3 */
+ "FM_CPU0_DISABLE_COD_N", "",
+ "RST_LVC3_CPU0_RESET_N", "PWRGD_LVC3_CPU0_PWRGOOD",
+ "PWRGD_PLT_AUX_CPU0_LVT3", "",
+ "", "",
+ /* GPORT4 */
+ "H_LVT3_CPU0_PROCHOT_N", "H_LVT3_CPU0_MEMHOT_IN_N",
+ "H_LVT3_CPU0_MEMHOT_OUT_N", "H_LVT3_CPU0_MEMTRIP_OUT_N",
+ "H_LVT3_CPU0_THERMTRIP_OUT_N", "",
+ "H_LVT3_CPU0_NMI", "FM_S3M_CPU0_CD_INIT_ERROR",
+ /* GPORT5 */
+ "FM_CPU0_PKG_ID0", "FM_CPU0_PKG_ID1",
+ "FM_CPU0_PROC_ID0", "FM_CPU0_PROC_ID1";
+
+ pinctrl-0 = <&U62080_pins>;
+ pinctrl-names = "default";
+ U62080_pins: cfg-pins {
+ pins = "gp10", "gp11", "gp12", "gp13", "gp14";
+ function = "gpio";
+ input-enable;
+ bias-pull-up;
+ };
+ };
+ };
+
+ i2c@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c@2 {
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pvccinfaon-pvccfa-cpu0@58 {
+ compatible = "mps,mp2971";
+ reg = <0x58>;
+ interrupt-parent = <&smb_pex_cpu0_event>;
+ interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+
+ regulators {
+ pvccinfaon_cpu0: vout0 {
+ regulator-name = "pvccinfaon_cpu0";
+ regulator-enable-ramp-delay = <200>;
+ };
+ pvccfa_ehv_cpu0: vout1 {
+ regulator-name = "pvccfa_ehv_cpu0";
+ regulator-enable-ramp-delay = <200>;
+ };
+ };
+ };
+ tda38640-pvnn-main-cpu0@40 {
+ compatible = "infineon,tda38640";
+ reg = <0x40>;
+ interrupt-parent = <&smb_pex_cpu0_event>;
+ interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
+
+ regulators {
+ pvnn_main_cpu0: vout {
+ regulator-name = "pvnn_main_cpu0";
+ regulator-enable-ramp-delay = <200>;
+ };
+ };
+ };
+ };
+
+ i2c@3 {
+ reg = <3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mp2973-pvccin-pvccfa-cpu0@58 {
+ compatible = "mps,mp2973";
+ reg = <0x58>;
+ interrupt-parent = <&smb_pex_cpu0_event>;
+ interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
+
+ regulators {
+ pvccin_cpu0: vout0 {
+ regulator-name = "pvccin_cpu0";
+ regulator-enable-ramp-delay = <200>;
+ };
+ pvccfa_ehv_fivra_cpu0: vout1 {
+ regulator-name = "pvccfa_ehv_fivra_cpu0";
+ regulator-enable-ramp-delay = <200>;
+ };
+ };
+ };
+ };
+
+ i2c@4 {
+ reg = <4>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ tda38640-pvccd-hv-cpu0@40 {
+ compatible = "infineon,tda38640";
+ reg = <0x40>;
+ interrupt-parent = <&smb_pex_cpu0_event>;
+ interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+ infineon,en-pin-fixed-level;
+
+ regulators {
+ pvccd_hv_cpu0: vout {
+ regulator-name = "pvccd_hv_cpu0";
+ regulator-enable-ramp-delay = <200>;
+ };
+ };
+ };
+ };
+
+ i2c@5 {
+ reg = <5>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ tda38640-pvpp-hbm-cpu0@40 {
+ compatible = "infineon,tda38640";
+ reg = <0x40>;
+ interrupt-parent = <&smb_pex_cpu0_event>;
+ interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+
+ regulators {
+ pvpp_hbm_cpu0: vout {
+ regulator-name = "pvpp_hbm_cpu0";
+ regulator-enable-ramp-delay = <200>;
+ };
+ };
+ };
+ };
+
+ i2c@6 {
+ reg = <6>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c@7 {
+ reg = <7>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+};
+
+&i2c7 {
+ status = "okay";
+
+ i2cmux4: mux@77 {
+ compatible = "maxim,max7357";
+ reg = <0x77>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reset-gpios = <&gpio0 ASPEED_GPIO(F, 3) (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+ vdd-supply = <&p3v3_aux>;
+
+ i2c@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ smb_pex_cpu1_event: pinctrl@20 {
+ compatible = "cypress,cy8c9540";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-parent = <&smb_pex_vr_ctrl>;
+ interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ vdd-supply = <&p3v3_aux>;
+ reset-gpios = <&smb_svc_pex_cpu1_led 16 GPIO_ACTIVE_HIGH>;
+
+ gpio-reserved-ranges = <14 2>, <21 1>, <25 3>, <33 1>;
+
+ gpio-line-names =
+ /* GPORT0 */
+ "PWRGD_CHD_CPU1", "PWRGD_CHC_CPU1",
+ "PWRGD_CHB_CPU1", "PWRGD_CHA_CPU1",
+ "PWRGD_CHE_CPU1", "PWRGD_CHF_CPU1",
+ "PWRGD_CHG_CPU1", "PWRGD_CHH_CPU1",
+ /* GPORT1 */
+ "SMB_VR_PVPP_HBM_CPU1_ALERT_N", "SMB_VR_PVCCINFAON_CPU1_ALERT_N",
+ "SMB_VR_PVNN_MAIN_CPU1_ALERT_N", "SMB_VR_PVCCD_HV_CPU1_ALERT_N",
+ "SMB_VR_PVCCIN_CPU1_ALERT_N", "SEL_SMB_DIMM_CPU1",
+ "", "",
+ /* GPORT2 */
+ "PWRGD_LVC3_CPU1_AB_DRAM_G", "PWRGD_LVC3_CPU1_CD_DRAM_G",
+ "PWRGD_LVC3_CPU1_EF_DRAM_G", "PWRGD_LVC3_CPU1_GH_DRAM_G",
+ /* GPORT3 */
+ "FM_CPU1_DISABLE_COD_N", "",
+ "RST_LVC3_CPU1_RESET_N", "PWRGD_LVC3_CPU1_PWRGOOD",
+ "PWRGD_PLT_AUX_CPU1_LVT3", "",
+ "", "",
+ /* GPORT4 */
+ "H_LVT3_CPU1_PROCHOT_N", "H_LVT3_CPU1_MEMHOT_IN_N",
+ "H_LVT3_CPU1_MEMHOT_OUT_N", "H_LVT3_CPU1_MEMTRIP_OUT_N",
+ "H_LVT3_CPU1_THERMTRIP_OUT_N", "",
+ "H_LVT3_CPU1_NMI", "FM_S3M_CPU1_CD_INIT_ERROR",
+ /* GPORT5 */
+ "FM_CPU1_PKG_ID0", "FM_CPU1_PKG_ID1",
+ "FM_CPU1_PROC_ID0", "FM_CPU1_PROC_ID1";
+
+ pinctrl-0 = <&U62090_pins>;
+ pinctrl-names = "default";
+ U62090_pins: cfg-pins {
+ pins = "gp10", "gp11", "gp12", "gp13", "gp14";
+ function = "gpio";
+ input-enable;
+ bias-pull-up;
+ };
+ };
+ };
+
+ i2c@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c@2 {
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pvccinfaon-pvccfa-cpu1@58 {
+ compatible = "mps,mp2971";
+ reg = <0x58>;
+ interrupt-parent = <&smb_pex_cpu1_event>;
+ interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+
+ regulators {
+ pvccinfaon_cpu1: vout0 {
+ regulator-name = "pvccinfaon_cpu1";
+ regulator-enable-ramp-delay = <200>;
+ };
+ pvccfa_ehv_cpu1: vout1 {
+ regulator-name = "pvccfa_ehv_cpu1";
+ regulator-enable-ramp-delay = <200>;
+ };
+ };
+ };
+ tda38640-pvnn-main-cpu1@40 {
+ compatible = "infineon,tda38640";
+ reg = <0x40>;
+ interrupt-parent = <&smb_pex_cpu1_event>;
+ interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
+
+ regulators {
+ pvnn_main_cpu1: vout {
+ regulator-name = "pvnn_main_cpu1";
+ regulator-enable-ramp-delay = <200>;
+ };
+ };
+ };
+ };
+
+ i2c@3 {
+ reg = <3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mp2973-pvccin-pvccfa-cpu1@58 {
+ compatible = "mps,mp2973";
+ reg = <0x58>;
+ interrupt-parent = <&smb_pex_cpu1_event>;
+ interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
+
+ regulators {
+ pvccin_cpu1: vout0 {
+ regulator-name = "pvccin_cpu1";
+ regulator-enable-ramp-delay = <200>;
+ };
+ pvccfa_ehv_fivra_cpu1: vout1 {
+ regulator-name = "pvccfa_ehv_fivra_cpu1";
+ regulator-enable-ramp-delay = <200>;
+ };
+ };
+ };
+ };
+
+ i2c@4 {
+ reg = <4>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ tda38640-pvccd-hv-cpu1@40 {
+ compatible = "infineon,tda38640";
+ reg = <0x40>;
+ interrupt-parent = <&smb_pex_cpu1_event>;
+ interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+ infineon,en-pin-fixed-level;
+
+ regulators {
+ pvccd_hv_cpu1: vout {
+ regulator-name = "pvccd_hv_cpu1";
+ regulator-enable-ramp-delay = <200>;
+ };
+ };
+ };
+ };
+
+ i2c@5 {
+ reg = <5>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ tda38640-pvpp-hbm-cpu1@40 {
+ compatible = "infineon,tda38640";
+ reg = <0x40>;
+ interrupt-parent = <&smb_pex_cpu1_event>;
+ interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+
+ regulators {
+ pvpp_hbm_cpu1: vout {
+ regulator-name = "pvpp_hbm_cpu1";
+ regulator-enable-ramp-delay = <200>;
+ };
+ };
+ };
+ };
+
+ i2c@6 {
+ reg = <6>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c@7 {
+ reg = <7>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+};
+
+&i2c6 {
+ status = "okay";
+
+ i2cmux3: mux@77 {
+ compatible = "maxim,max7357";
+ reg = <0x77>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vdd-supply = <&p3v3_aux>;
+
+ i2c@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ smb_pex_cpu2_event: pinctrl@20 {
+ compatible = "cypress,cy8c9540";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-parent = <&smb_pex_vr_ctrl>;
+ interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ vdd-supply = <&p3v3_aux>;
+ reset-gpios = <&smb_svc_pex_cpu2_led 16 GPIO_ACTIVE_HIGH>;
+
+ gpio-reserved-ranges = <14 2>, <21 1>, <25 3>, <33 1>;
+
+ gpio-line-names =
+ /* GPORT0 */
+ "PWRGD_CHD_CPU2", "PWRGD_CHC_CPU2",
+ "PWRGD_CHB_CPU2", "PWRGD_CHA_CPU2",
+ "PWRGD_CHE_CPU2", "PWRGD_CHF_CPU2",
+ "PWRGD_CHG_CPU2", "PWRGD_CHH_CPU2",
+ /* GPORT1 */
+ "SMB_VR_PVPP_HBM_CPU2_ALERT_N", "SMB_VR_PVCCINFAON_CPU2_ALERT_N",
+ "SMB_VR_PVNN_MAIN_CPU2_ALERT_N", "SMB_VR_PVCCD_HV_CPU2_ALERT_N",
+ "SMB_VR_PVCCIN_CPU2_ALERT_N", "SEL_SMB_DIMM_CPU2",
+ "", "",
+ /* GPORT2 */
+ "PWRGD_LVC3_CPU2_AB_DRAM_G", "PWRGD_LVC3_CPU2_CD_DRAM_G",
+ "PWRGD_LVC3_CPU2_EF_DRAM_G", "PWRGD_LVC3_CPU2_GH_DRAM_G",
+ /* GPORT3 */
+ "FM_CPU2_DISABLE_COD_N", "",
+ "RST_LVC3_CPU2_RESET_N", "PWRGD_LVC3_CPU2_PWRGOOD",
+ "PWRGD_PLT_AUX_CPU2_LVT3", "",
+ "", "",
+ /* GPORT4 */
+ "H_LVT3_CPU2_PROCHOT_N", "H_LVT3_CPU2_MEMHOT_IN_N",
+ "H_LVT3_CPU2_MEMHOT_OUT_N", "H_LVT3_CPU2_MEMTRIP_OUT_N",
+ "H_LVT3_CPU2_THERMTRIP_OUT_N", "",
+ "H_LVT3_CPU2_NMI", "FM_S3M_CPU2_CD_INIT_ERROR",
+ /* GPORT5 */
+ "FM_CPU2_PKG_ID0", "FM_CPU2_PKG_ID1",
+ "FM_CPU2_PROC_ID0", "FM_CPU2_PROC_ID1";
+
+ pinctrl-0 = <&U62100_pins>;
+ pinctrl-names = "default";
+ U62100_pins: cfg-pins {
+ pins = "gp10", "gp11", "gp12", "gp13", "gp14";
+ function = "gpio";
+ input-enable;
+ bias-pull-up;
+ };
+ };
+ };
+
+ i2c@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c@2 {
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pvccinfaon-pvccfa-cpu2@58 {
+ compatible = "mps,mp2971";
+ reg = <0x58>;
+ interrupt-parent = <&smb_pex_cpu2_event>;
+ interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+
+ regulators {
+ pvccinfaon_cpu2: vout0 {
+ regulator-name = "pvccinfaon_cpu2";
+ regulator-enable-ramp-delay = <200>;
+ };
+ pvccfa_ehv_cpu2: vout1 {
+ regulator-name = "pvccfa_ehv_cpu2";
+ regulator-enable-ramp-delay = <200>;
+ };
+ };
+ };
+ tda38640-pvnn-main-cpu2@40 {
+ compatible = "infineon,tda38640";
+ reg = <0x40>;
+ interrupt-parent = <&smb_pex_cpu2_event>;
+ interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
+
+ regulators {
+ pvnn_main_cpu2: vout {
+ regulator-name = "pvnn_main_cpu2";
+ regulator-enable-ramp-delay = <200>;
+ };
+ };
+ };
+ };
+
+ i2c@3 {
+ reg = <3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mp2973-pvccin-pvccfa-cpu2@58 {
+ compatible = "mps,mp2973";
+ reg = <0x58>;
+ interrupt-parent = <&smb_pex_cpu2_event>;
+ interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
+
+ regulators {
+ pvccin_cpu2: vout0 {
+ regulator-name = "pvccin_cpu2";
+ regulator-enable-ramp-delay = <200>;
+ };
+ pvccfa_ehv_fivra_cpu2: vout1 {
+ regulator-name = "pvccfa_ehv_fivra_cpu2";
+ regulator-enable-ramp-delay = <200>;
+ };
+ };
+ };
+ };
+
+ i2c@4 {
+ reg = <4>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ tda38640-pvccd-hv-cpu2@40 {
+ compatible = "infineon,tda38640";
+ reg = <0x40>;
+ interrupt-parent = <&smb_pex_cpu2_event>;
+ interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+ infineon,en-pin-fixed-level;
+
+ regulators {
+ pvccd_hv_cpu2: vout {
+ regulator-name = "pvccd_hv_cpu2";
+ regulator-enable-ramp-delay = <200>;
+ };
+ };
+ };
+ };
+
+ i2c@5 {
+ reg = <5>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ tda38640-pvpp-hbm-cpu2@40 {
+ compatible = "infineon,tda38640";
+ reg = <0x40>;
+ interrupt-parent = <&smb_pex_cpu2_event>;
+ interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+
+ regulators {
+ pvpp_hbm_cpu2: vout {
+ regulator-name = "pvpp_hbm_cpu2";
+ regulator-enable-ramp-delay = <200>;
+ };
+ };
+ };
+ };
+
+ i2c@6 {
+ reg = <6>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c@7 {
+ reg = <7>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+};
+
+&i2c12 {
+ status = "okay";
+
+ i2cmux22: mux@77 {
+ compatible = "maxim,max7357";
+ reg = <0x77>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reset-gpios = <&gpio0 ASPEED_GPIO(P, 2) (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+ vdd-supply = <&p3v3_aux>;
+
+ i2c@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ smb_pex_cpu3_event: pinctrl@20 {
+ compatible = "cypress,cy8c9540";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-parent = <&smb_pex_vr_ctrl>;
+ interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ vdd-supply = <&p3v3_aux>;
+ reset-gpios = <&smb_svc_pex_cpu3_led 16 GPIO_ACTIVE_HIGH>;
+
+ gpio-reserved-ranges = <14 2>, <21 1>, <25 3>, <33 1>;
+
+ gpio-line-names =
+ /* GPORT0 */
+ "PWRGD_CHD_CPU3", "PWRGD_CHC_CPU3",
+ "PWRGD_CHB_CPU3", "PWRGD_CHA_CPU3",
+ "PWRGD_CHE_CPU3", "PWRGD_CHF_CPU3",
+ "PWRGD_CHG_CPU3", "PWRGD_CHH_CPU3",
+ /* GPORT1 */
+ "SMB_VR_PVPP_HBM_CPU3_ALERT_N", "SMB_VR_PVCCINFAON_CPU3_ALERT_N",
+ "SMB_VR_PVNN_MAIN_CPU3_ALERT_N", "SMB_VR_PVCCD_HV_CPU3_ALERT_N",
+ "SMB_VR_PVCCIN_CPU3_ALERT_N", "SEL_SMB_DIMM_CPU3",
+ "", "",
+ /* GPORT2 */
+ "PWRGD_LVC3_CPU3_AB_DRAM_G", "PWRGD_LVC3_CPU3_CD_DRAM_G",
+ "PWRGD_LVC3_CPU3_EF_DRAM_G", "PWRGD_LVC3_CPU3_GH_DRAM_G",
+ /* GPORT3 */
+ "FM_CPU3_DISABLE_COD_N", "",
+ "RST_LVC3_CPU3_RESET_N", "PWRGD_LVC3_CPU3_PWRGOOD",
+ "PWRGD_PLT_AUX_CPU3_LVT3", "",
+ "", "",
+ /* GPORT4 */
+ "H_LVT3_CPU3_PROCHOT_N", "H_LVT3_CPU3_MEMHOT_IN_N",
+ "H_LVT3_CPU3_MEMHOT_OUT_N", "H_LVT3_CPU3_MEMTRIP_OUT_N",
+ "H_LVT3_CPU3_THERMTRIP_OUT_N", "",
+ "H_LVT3_CPU3_NMI", "FM_S3M_CPU3_CD_INIT_ERROR",
+ /* GPORT5 */
+ "FM_CPU3_PKG_ID0", "FM_CPU3_PKG_ID1",
+ "FM_CPU3_PROC_ID0", "FM_CPU3_PROC_ID1";
+
+ pinctrl-0 = <&U62110_pins>;
+ pinctrl-names = "default";
+ U62110_pins: cfg-pins {
+ pins = "gp10", "gp11", "gp12", "gp13", "gp14";
+ function = "gpio";
+ input-enable;
+ bias-pull-up;
+ };
+ };
+ };
+
+ i2c@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c@2 {
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pvccinfaon-pvccfa-cpu3@58 {
+ compatible = "mps,mp2971";
+ reg = <0x58>;
+ interrupt-parent = <&smb_pex_cpu3_event>;
+ interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+
+ regulators {
+ pvccinfaon_cpu3: vout0 {
+ regulator-name = "pvccinfaon_cpu3";
+ regulator-enable-ramp-delay = <200>;
+ };
+ pvccfa_ehv_cpu3: vout1 {
+ regulator-name = "pvccfa_ehv_cpu3";
+ regulator-enable-ramp-delay = <200>;
+ };
+ };
+ };
+ tda38640-pvnn-main-cpu3@40 {
+ compatible = "infineon,tda38640";
+ reg = <0x40>;
+ interrupt-parent = <&smb_pex_cpu3_event>;
+ interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
+
+ regulators {
+ pvnn_main_cpu3: vout {
+ regulator-name = "pvnn_main_cpu3";
+ regulator-enable-ramp-delay = <200>;
+ };
+ };
+ };
+ };
+
+ i2c@3 {
+ reg = <3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mp2973-pvccin-pvccfa-cpu3@58 {
+ compatible = "mps,mp2973";
+ reg = <0x58>;
+ interrupt-parent = <&smb_pex_cpu3_event>;
+ interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
+
+ regulators {
+ pvccin_cpu3: vout0 {
+ regulator-name = "pvccin_cpu3";
+ regulator-enable-ramp-delay = <200>;
+ };
+ pvccfa_ehv_fivra_cpu3: vout1 {
+ regulator-name = "pvccfa_ehv_fivra_cpu3";
+ regulator-enable-ramp-delay = <200>;
+ };
+ };
+ };
+ };
+
+ i2c@4 {
+ reg = <4>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ tda38640-pvccd-hv-cpu3@40 {
+ compatible = "infineon,tda38640";
+ reg = <0x40>;
+ interrupt-parent = <&smb_pex_cpu3_event>;
+ interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+ infineon,en-pin-fixed-level;
+
+ regulators {
+ pvccd_hv_cpu3: vout {
+ regulator-name = "pvccd_hv_cpu3";
+ regulator-enable-ramp-delay = <200>;
+ };
+ };
+ };
+ };
+
+ i2c@5 {
+ reg = <5>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ tda38640-pvpp-hbm-cpu3@40 {
+ compatible = "infineon,tda38640";
+ reg = <0x40>;
+ interrupt-parent = <&smb_pex_cpu3_event>;
+ interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+
+ regulators {
+ pvpp_hbm_cpu3: vout {
+ regulator-name = "pvpp_hbm_cpu3";
+ regulator-enable-ramp-delay = <200>;
+ };
+ };
+ };
+ };
+
+ i2c@6 {
+ reg = <6>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c@7 {
+ reg = <7>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+};
+
+&i2c15 {
+ status = "okay";
+
+ i2cmux14: mux@77 {
+ compatible = "maxim,max7357";
+ reg = <0x77>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reset-gpios = <&gpio0 ASPEED_GPIO(R, 1) (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+ vdd-supply = <&p3v3_aux>;
+
+ i2c@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2cmux15: mux@70 {
+ compatible = "maxim,max7357";
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reset-gpios = <&bmc_pex_irq 11 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+ vdd-supply = <&p3v3_aux>;
+ };
+ };
+
+ i2c@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2cmux16: mux@70 {
+ compatible = "maxim,max7357";
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reset-gpios = <&bmc_pex_irq 2 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+ vdd-supply = <&p3v3_aux>;
+ };
+ };
+
+ i2c@2 {
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2cmux17: mux@70 {
+ compatible = "maxim,max7357";
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reset-gpios = <&bmc_pex_irq 0 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+ vdd-supply = <&p3v3_aux>;
+ };
+ };
+
+ i2c@3 {
+ reg = <3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2cmux18: mux@70 {
+ compatible = "maxim,max7357";
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reset-gpios = <&bmc_pex_irq 3 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+ vdd-supply = <&p3v3_aux>;
+ };
+ };
+
+ i2c@4 {
+ reg = <4>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2cmux19: mux@70 {
+ compatible = "maxim,max7357";
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reset-gpios = <&bmc_pex_irq 9 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+ vdd-supply = <&p3v3_aux>;
+ };
+ };
+
+ i2c@5 {
+ reg = <5>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ smb_pex_rssd17_32: pinctrl@20 {
+ compatible = "cypress,cy8c9560";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-parent = <&bmc_pex_irq>;
+ interrupts = <13 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ vdd-supply = <&p3v3_aux>;
+ reset-gpios = <&bmc_pex_irq 19 GPIO_ACTIVE_HIGH>;
+
+ gpio-reserved-ranges = <48 12>;
+
+ gpio-line-names =
+ /* GPORT0 */
+ "RSSD17_SMBRST_N", "RSSD18_SMBRST_N",
+ "RSSD19_SMBRST_N", "RSSD20_SMBRST_N",
+ "RSSD21_SMBRST_N", "RSSD22_SMBRST_N",
+ "RSSD23_SMBRST_N", "RSSD24_SMBRST_N",
+ /* GPORT1 */
+ "RSSD25_SMBRST_N", "RSSD26_SMBRST_N",
+ "RSSD27_SMBRST_N", "RSSD28_SMBRST_N",
+ "RSSD29_SMBRST_N", "RSSD30_SMBRST_N",
+ "RSSD31_SMBRST_N", "RSSD32_SMBRST_N",
+ /* GPORT2 */
+ "RSSD17_PWRDIS", "RSSD18_PWRDIS",
+ "RSSD19_PWRDIS", "RSSD20_PWRDIS",
+ /* GPORT3 */
+ "RSSD21_PWRDIS", "RSSD22_PWRDIS",
+ "RSSD23_PWRDIS", "RSSD24_PWRDIS",
+ "RSSD25_PWRDIS", "RSSD26_PWRDIS",
+ "RSSD27_PWRDIS", "RSSD28_PWRDIS",
+ /* GPORT4 */
+ "RSSD29_PWRDIS", "RSSD30_PWRDIS",
+ "RSSD31_PWRDIS", "RSSD32_PWRDIS",
+ "RSSD17_RESET_N", "RSSD18_RESET_N",
+ "RSSD19_RESET_N", "RSSD20_RESET_N",
+ /* GPORT5 */
+ "RSSD21_RESET_N", "RSSD22_RESET_N",
+ "RSSD23_RESET_N", "RSSD24_RESET_N",
+ "RSSD25_RESET_N", "RSSD26_RESET_N",
+ "RSSD27_RESET_N", "RSSD28_RESET_N",
+ /* GPORT6 */
+ "RSSD29_RESET_N", "RSSD30_RESET_N",
+ "RSSD31_RESET_N", "RSSD32_RESET_N",
+ "", "",
+ "", "",
+ /* GPORT7 */
+ "", "",
+ "", "",
+ "", "",
+ "", "";
+ };
+ };
+
+ i2c@6 {
+ reg = <6>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2cmux20: mux@70 {
+ compatible = "maxim,max7357";
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reset-gpios = <&bmc_pex_irq 4 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+ vdd-supply = <&p3v3_aux>;
+
+ i2c@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ i2c@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ i2c@2 {
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ i2c@3 {
+ reg = <3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ i2c@4 {
+ reg = <4>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ i2c@5 {
+ reg = <5>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ i2c@6 {
+ reg = <6>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ i2c@7 {
+ reg = <7>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+ };
+
+ i2c@7 {
+ reg = <7>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2cmux21: mux@70 {
+ compatible = "maxim,max7357";
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reset-gpios = <&bmc_pex_irq 5 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+ vdd-supply = <&p3v3_aux>;
+
+ i2c@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ i2c@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ i2c@2 {
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ i2c@3 {
+ reg = <3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ i2c@4 {
+ reg = <4>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ i2c@5 {
+ reg = <5>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ i2c@6 {
+ reg = <6>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ i2c@7 {
+ reg = <7>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+ };
+ };
+};
+
+&i2c8 {
+ status = "okay";
+
+ i2cmux5: mux@77 {
+ compatible = "maxim,max7357";
+ reg = <0x77>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reset-gpios = <&gpio0 ASPEED_GPIO(R, 0) (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+ vdd-supply = <&p3v3_aux>;
+
+ i2c@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2cmux6: mux@70 {
+ compatible = "maxim,max7357";
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reset-gpios = <&bmc_pex_irq 16 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+ vdd-supply = <&p3v3_aux>;
+ };
+ };
+
+ i2c@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2cmux7: mux@70 {
+ compatible = "maxim,max7357";
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reset-gpios = <&bmc_pex_irq 7 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+ vdd-supply = <&p3v3_aux>;
+ };
+ };
+
+ i2c@2 {
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2cmux8: mux@70 {
+ compatible = "maxim,max7357";
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reset-gpios = <&bmc_pex_irq 1 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+ vdd-supply = <&p3v3_aux>;
+ };
+ };
+
+ i2c@3 {
+ reg = <3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2cmux9: mux@70 {
+ compatible = "maxim,max7357";
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reset-gpios = <&bmc_pex_irq 10 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+ vdd-supply = <&p3v3_aux>;
+ };
+ };
+
+ i2c@4 {
+ reg = <4>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2cmux10: mux@70 {
+ compatible = "maxim,max7357";
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reset-gpios = <&bmc_pex_irq 15 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+ vdd-supply = <&p3v3_aux>;
+ };
+ };
+
+ i2c@5 {
+ reg = <5>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ smb_pex_rssd_01_16: pinctrl@20 {
+ compatible = "cypress,cy8c9560";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-parent = <&bmc_pex_irq>;
+ interrupts = <6 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ vdd-supply = <&p3v3_aux>;
+ reset-gpios = <&bmc_pex_irq 18 GPIO_ACTIVE_HIGH>;
+
+ gpio-reserved-ranges = <48 12>;
+
+ gpio-line-names =
+ /* GPORT0 */
+ "RSSD01_SMBRST_N", "RSSD02_SMBRST_N",
+ "RSSD03_SMBRST_N", "RSSD04_SMBRST_N",
+ "RSSD05_SMBRST_N", "RSSD06_SMBRST_N",
+ "RSSD07_SMBRST_N", "RSSD08_SMBRST_N",
+ /* GPORT1 */
+ "RSSD09_SMBRST_N", "RSSD10_SMBRST_N",
+ "RSSD11_SMBRST_N", "RSSD12_SMBRST_N",
+ "RSSD13_SMBRST_N", "RSSD14_SMBRST_N",
+ "RSSD15_SMBRST_N", "RSSD16_SMBRST_N",
+ /* GPORT2 */
+ "RSSD01_PWRDIS", "RSSD02_PWRDIS",
+ "RSSD03_PWRDIS", "RSSD04_PWRDIS",
+ /* GPORT3 */
+ "RSSD05_PWRDIS", "RSSD06_PWRDIS",
+ "RSSD07_PWRDIS", "RSSD08_PWRDIS",
+ "RSSD09_PWRDIS", "RSSD10_PWRDIS",
+ "RSSD11_PWRDIS", "RSSD12_PWRDIS",
+ /* GPORT4 */
+ "RSSD13_PWRDIS", "RSSD14_PWRDIS",
+ "RSSD15_PWRDIS", "RSSD16_PWRDIS",
+ "RSSD01_RESET_N", "RSSD02_RESET_N",
+ "RSSD03_RESET_N", "RSSD04_RESET_N",
+ /* GPORT5 */
+ "RSSD05_RESET_N", "RSSD06_RESET_N",
+ "RSSD07_RESET_N", "RSSD08_RESET_N",
+ "RSSD09_RESET_N", "RSSD10_RESET_N",
+ "RSSD11_RESET_N", "RSSD12_RESET_N",
+ /* GPORT6 */
+ "RSSD13_RESET_N", "RSSD14_RESET_N",
+ "RSSD15_RESET_N", "RSSD16_RESET_N",
+ "", "",
+ "", "",
+ /* GPORT7 */
+ "", "",
+ "", "",
+ "", "",
+ "", "";
+ };
+ };
+
+ i2c@6 {
+ reg = <6>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2cmux11: mux@70 {
+ compatible = "maxim,max7357";
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reset-gpios = <&bmc_pex_irq 12 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+ vdd-supply = <&p3v3_aux>;
+
+ i2c@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ i2c@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ i2c@2 {
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ i2c@3 {
+ reg = <3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ i2c@4 {
+ reg = <4>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ i2c@5 {
+ reg = <5>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ i2c@6 {
+ reg = <6>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ i2c@7 {
+ reg = <7>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+ };
+
+ i2c@7 {
+ reg = <7>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2cmux12: mux@70 {
+ compatible = "maxim,max7357";
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reset-gpios = <&bmc_pex_irq 14 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+ vdd-supply = <&p3v3_aux>;
+
+ i2c@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ i2c@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ i2c@2 {
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ i2c@3 {
+ reg = <3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ i2c@4 {
+ reg = <4>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ i2c@5 {
+ reg = <5>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ i2c@6 {
+ reg = <6>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ i2c@7 {
+ reg = <7>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+ };
+ };
+};
+
+&i2c13 {
+ status = "okay";
+
+ i2cmux23: mux@77 {
+ compatible = "maxim,max7357";
+ reg = <0x77>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reset-gpios = <&gpio0 ASPEED_GPIO(R, 4) (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+ vdd-supply = <&p3v3_bmc_aux>;
+ };
+};
+
+&i2cmux23 {
+ i2c@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ smb_pex_vr_ctrl: pinctrl@20 {
+ compatible = "cypress,cy8c9540";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <ASPEED_GPIO(V, 2) IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ vdd-supply = <&p3v3_bmc_aux>;
+ reset-gpios = <&gpio0 ASPEED_GPIO(Q, 2) GPIO_ACTIVE_HIGH>;
+ gpio-line-names =
+ /* GPORT0 */
+ "BCM0_INPUT_DISABLE_N", "SMB_VR_P3V3_AUX_ALERT_N",
+ "SMB_PEX_CPU1_EVENT_INT", "SMB_PEX_CPU2_EVENT_INT",
+ "DPIC0_VOLTAGE_DETECTB_N", "DPIC0_VOLTAGE_DETECTA_N",
+ "DPIC1_VOLTAGE_DETECTA_N", "DPIC1_VOLTAGE_DETECTB_N",
+ /* GPORT1 */
+ "SMB_PEX_NIC_INT", "SMB_VR_P1V05_PCH_AUX_ALERT_N",
+ "SMB_PEX_CPU0_EVENT_INT", "SMB_PEX_CPU3_EVENT_INT",
+ "LED_ID_TPM", "PLUG_DETECT_TPM",
+ "PLUG_DETECT_M2_SSD_CARRIER1", "RST_M2_SSD1_PERST_N",
+ /* GPORT2 */
+ "LED_ID_BAT", "LED_ID_MGMT_PORT2",
+ "LED_ID_MGMT_PORT1", "SMB_VR_P5V_AUX_ALERT_N",
+ /* GPORT3 */
+ "SMB_VR_AUX_SSB_ALERT_N", "BCM1_INPUT_DISABLE_N",
+ "LED_ID_NIC1_PORT1", "LED_ID_NIC1_PORT2",
+ "LED_ID_NIC2_PORT1", "LED_ID_NIC2_PORT2",
+ "RST_M2_SSD2_PERST_N", "PLUG_DETECT_M2_SSD2",
+ /* GPORT4 */
+ "PLUG_DETECT_BAT", "PLUG_DETECT_M2_SSD1",
+ "M2_SSD1_SSB_ALERT_N", "BCM2_INPUT_DISABLE_N",
+ "SMB_VR_P1V8_PCH_AUX_ALERT_N", "BCM3_INPUT_DISABLE_N",
+ "LED_PWR_DWR_BACK", "LED_ID_DWR_BACK_P",
+ /* GPORT5 */
+ "LED_ID_M2_SSD2", "LED_ID_M2_SSD1",
+ "PLUG_DETECT_M2_SSD_CARRIER2", "M2_SSD2_SSB_ALERT_N";
+
+ pinctrl-0 = <&U62120_input &U62120_input_pullup>;
+ pinctrl-names = "default";
+ U62120_input: input-pins {
+ pins = "gp10";
+ function = "gpio";
+ input-enable;
+ bias-disable;
+ };
+ U62120_input_pullup: input-pullup-pins {
+ pins = "gp01", "gp02", "gp03", "gp11", "gp12", "gp13",
+ "gp23", "gp30", "gp40", "gp42", "gp44", "gp53";
+ function = "gpio";
+ input-enable;
+ bias-pull-up;
+ };
+ };
+ };
+ i2c@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ bmc_pex_irq: pinctrl@20 {
+ compatible = "cypress,cy8c9520";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <ASPEED_GPIO(V, 0) IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ vdd-supply = <&p3v3_aux>;
+ reset-gpios = <&gpio0 ASPEED_GPIO(Q, 1) GPIO_ACTIVE_HIGH>;
+ gpio-line-names =
+ /* GPORT0 */
+ "SMB_MUX_PWM_FANGRP2_RST_INT_N", "SMB_MUX_SSB_FANGRP2_RST_INT_N",
+ "SMB_MUX_PWM_FANGRP1_RST_INT_N", "SMB_MUX_SSB_RSSD01_08_RST_INT_N",
+ "SMB_MUX_RSSD01_08_RST_INT_N", "SMB_MUX_RSSD09_16_RST_INT_N",
+ "SMB_PEX_RSSD01_16_INT", "SMB_MUX_SSB_FANGRP1_RST_INT_N",
+ /* GPORT1 */
+ "SMB_SVC_PEX_FAN_ALERT_INT", "SMB_MUX_SSB_RSSD09_16_RST_INT_N",
+ "SMB_MUX_SSB_RSSD17_24_RST_INT_N", "SMB_MUX_PWM_FANGRP0_RST_INT_N",
+ "SMB_MUX_RSSD17_24_RST_INT_N", "SMB_PEX_RSSD17_32_INT",
+ "SMB_MUX_RSSD25_32_RST_INT_N", "SMB_MUX_SSB_RSSD25_32_RST_INT_N",
+ /* GPORT2 */
+ "SMB_MUX_SSB_FANGRP0_RST_INT_N", "PEX_FAN_ALERT_RST",
+ "PEX_RSSD01_16_RST", "PEX_RSSD17_32_RST";
+ pinctrl-0 = <&U60000_pins>;
+ pinctrl-names = "default";
+ U60000_pins: cfg-pins {
+ pins = "gp06", "gp10", "gp15";
+ function = "gpio";
+ input-enable;
+ bias-disable;
+ };
+ };
+ };
+ i2c@2 {
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2cmux24: mux@70 {
+ compatible = "maxim,max7357";
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vdd-supply = <&p3v3_bmc_aux>;
+ };
+ };
+ i2c@3 {
+ reg = <3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ eeprom@51 {
+ compatible = "atmel,24c32";
+ reg = <0x51>;
+ pagesize = <32>;
+ vcc-supply = <&p3v3_bmc_aux>;
+ };
+ };
+ i2c@7 {
+ reg = <7>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2cmux25: mux@70 {
+ compatible = "maxim,max7357";
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+};
+
+&i2cmux25 {
+ reset-gpios = <&gpio0 ASPEED_GPIO(R, 2) (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+ vdd-supply = <&p3v3_bmc_aux>;
+ i2c@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ p5v_aux: ir38263-p5v-aux@40 {
+ compatible = "infineon,ir38263";
+ reg = <0x40>;
+
+ regulator-name = "p5v_aux";
+ regulator-enable-ramp-delay = <2000>;
+ vin-supply = <&p12v>;
+ vbus-supply = <&p3v3_bmc_aux>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ };
+ i2c@2 {
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ p3v3_aux: ir38263-p3v3-aux@40 {
+ compatible = "infineon,ir38263";
+ reg = <0x40>;
+
+ vin-supply = <&p12v>;
+ regulator-name = "p3v3_aux";
+ /*
+ * 2msec for regulator + 18msec for board capacitance
+ * Note: Every IC has a PTC which slowly charges the bypass
+ * cap.
+ */
+ regulator-enable-ramp-delay = <200000>;
+ };
+ };
+ i2c@3 {
+ reg = <3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ aux_ssb: regulator@3a {
+ compatible = "maxim,max5970";
+ reg = <0x3a>;
+ interrupt-parent = <&smb_pex_vr_ctrl>;
+ interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
+ vss1-supply = <&p5v_aux>;
+ vss2-supply = <&p3v3_aux>;
+ regulators {
+ p5v: sw0 {
+ regulator-name = "p5v";
+ shunt-resistor-micro-ohms = <12000>;
+ regulator-over-current-protection;
+ regulator-oc-protection-microamp = <3400000>;
+ regulator-enable-ramp-delay = <100000>;
+ };
+ p3v3_pch: sw1 {
+ regulator-name = "p3v3_pch";
+ shunt-resistor-micro-ohms = <12000>;
+ regulator-over-current-protection;
+ regulator-oc-protection-microamp = <3400000>;
+ regulator-enable-ramp-delay = <100000>;
+ };
+ };
+ };
+ };
+ i2c@4 {
+ reg = <4>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pli1209bc_p12v_a: regulator@5f {
+ compatible = "vicor,pli1209bc";
+ reg = <0x5f>;
+ regulators {
+ p12v_a: vout2 {
+ regulator-name = "bcm0";
+ regulator-boot-on;
+ };
+ };
+ };
+ };
+ i2c@5 {
+ reg = <5>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pli1209bc_p12v_b: regulator@5f {
+ compatible = "vicor,pli1209bc";
+ reg = <0x5f>;
+ regulators {
+ p12v_b: vout2 {
+ regulator-name = "bcm1";
+ regulator-boot-on;
+ };
+ };
+ };
+ };
+ i2c@6 {
+ reg = <6>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pli1209bc_p12v_c: regulator@5f {
+ compatible = "vicor,pli1209bc";
+ reg = <0x5f>;
+ regulators {
+ p12v_c: vout2 {
+ regulator-name = "bcm2";
+ regulator-boot-on;
+ };
+ };
+ };
+ };
+ i2c@7 {
+ reg = <7>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pli1209bc_p12v_d: regulator@5f {
+ compatible = "vicor,pli1209bc";
+ reg = <0x5f>;
+ regulators {
+ p12v_d: vout2 {
+ regulator-name = "bcm3";
+ regulator-boot-on;
+ };
+ };
+ };
+ };
+};
+
+&i2cmux24 {
+
+ reset-gpios = <&gpio0 ASPEED_GPIO(P, 3) (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+
+ i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ smb_svc_pex_rssd01_16: pinctrl@20 {
+ compatible = "cypress,cy8c9560";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <ASPEED_GPIO(S, 0) IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ vdd-supply = <&p3v3_bmc_aux>;
+ reset-gpios = <&smb_svc_pex_cpu0_led 17 GPIO_ACTIVE_HIGH>;
+ gpio-line-names =
+ /* GPORT0 */
+ "LED_ID_RSSD01", "LED_ID_RSSD02",
+ "LED_ID_RSSD03", "LED_ID_RSSD04",
+ "LED_ID_RSSD05", "LED_ID_RSSD06",
+ "LED_ID_RSSD07", "LED_ID_RSSD08",
+ /* GPORT1 */
+ "LED_ID_RSSD09", "LED_ID_RSSD10",
+ "LED_ID_RSSD11", "LED_ID_RSSD12",
+ "LED_ID_RSSD13", "LED_ID_RSSD14",
+ "LED_ID_RSSD15", "LED_ID_RSSD16",
+ /* GPORT2 */
+ "RSSD01_PRESENT_N", "RSSD02_PRESENT_N",
+ "RSSD03_PRESENT_N", "RSSD04_PRESENT_N",
+ /* GPORT3 */
+ "RSSD05_PRESENT_N", "RSSD06_PRESENT_N",
+ "RSSD07_PRESENT_N", "RSSD08_PRESENT_N",
+ "RSSD09_PRESENT_N", "RSSD10_PRESENT_N",
+ "RSSD11_PRESENT_N", "RSSD12_PRESENT_N",
+ /* GPORT4 */
+ "RSSD13_PRESENT_N", "RSSD14_PRESENT_N",
+ "RSSD15_PRESENT_N", "RSSD16_PRESENT_N",
+ "LED_ID_FAN_ASM01", "LED_ID_FAN_ASM02",
+ "LED_ID_FAN_ASM03", "LED_ID_FAN_ASM04",
+ /* GPORT5 */
+ "LED_ID_FAN_ASM05", "LED_ID_FAN_ASM06",
+ "PLUG_DETECT_FAN_ASM01", "PLUG_DETECT_FAN_ASM02",
+ "PLUG_DETECT_FAN_ASM03", "PLUG_DETECT_FAN_ASM04",
+ "PLUG_DETECT_FAN_ASM05", "PLUG_DETECT_FAN_ASM06",
+ /* GPORT6 */
+ "SSB_RSSD01_ALERT_N", "SSB_RSSD02_ALERT_N",
+ "SSB_RSSD03_ALERT_N", "SSB_RSSD04_ALERT_N",
+ "SSB_RSSD05_ALERT_N", "SSB_RSSD06_ALERT_N",
+ "SSB_RSSD07_ALERT_N", "SSB_RSSD08_ALERT_N",
+ /* GPORT7 */
+ "SSB_RSSD09_ALERT_N", "SSB_RSSD10_ALERT_N",
+ "SSB_RSSD11_ALERT_N", "SSB_RSSD12_ALERT_N",
+ "SSB_RSSD13_ALERT_N", "SSB_RSSD14_ALERT_N",
+ "SSB_RSSD15_ALERT_N", "SSB_RSSD16_ALERT_N";
+ pinctrl-0 = <&U65200_pins>;
+ pinctrl-names = "default";
+ U65200_pins: cfg-pins {
+ pins = "gp60", "gp61", "gp62",
+ "gp63", "gp64", "gp65", "gp66",
+ "gp67", "gp70", "gp71", "gp72",
+ "gp73", "gp74", "gp75", "gp76", "gp77";
+ function = "gpio";
+ input-enable;
+ bias-pull-up;
+ };
+ };
+ };
+ i2c@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ smb_svc_pex_rssd17_32: pinctrl@20 {
+ compatible = "cypress,cy8c9560";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <ASPEED_GPIO(H, 0) IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ vdd-supply = <&p3v3_bmc_aux>;
+ reset-gpios = <&smb_svc_pex_cpu1_led 17 GPIO_ACTIVE_HIGH>;
+ gpio-line-names =
+ /* GPORT0 */
+ "LED_ID_RSSD17", "LED_ID_RSSD18",
+ "LED_ID_RSSD19", "LED_ID_RSSD20",
+ "LED_ID_RSSD21", "LED_ID_RSSD22",
+ "LED_ID_RSSD23", "LED_ID_RSSD24",
+ /* GPORT1 */
+ "LED_ID_RSSD25", "LED_ID_RSSD26",
+ "LED_ID_RSSD27", "LED_ID_RSSD28",
+ "LED_ID_RSSD29", "LED_ID_RSSD30",
+ "LED_ID_RSSD31", "LED_ID_RSSD32",
+ /* GPORT2 */
+ "RSSD17_PRESENT_N", "RSSD18_PRESENT_N",
+ "RSSD19_PRESENT_N", "RSSD20_PRESENT_N",
+ /* GPORT3 */
+ "RSSD21_PRESENT_N", "RSSD22_PRESENT_N",
+ "RSSD23_PRESENT_N", "RSSD24_PRESENT_N",
+ "RSSD25_PRESENT_N", "RSSD26_PRESENT_N",
+ "RSSD27_PRESENT_N", "RSSD28_PRESENT_N",
+ /* GPORT4 */
+ "RSSD29_PRESENT_N", "RSSD30_PRESENT_N",
+ "RSSD31_PRESENT_N", "RSSD32_PRESENT_N",
+ "LED_ID_FAN_ASM07", "LED_ID_FAN_ASM08",
+ "LED_ID_FAN_ASM09", "LED_ID_FAN_ASM10",
+ /* GPORT5 */
+ "LED_ID_FAN_ASM11", "LED_ID_FAN_ASM12",
+ "PLUG_DETECT_FAN_ASM07", "PLUG_DETECT_FAN_ASM08",
+ "PLUG_DETECT_FAN_ASM09", "PLUG_DETECT_FAN_ASM10",
+ "PLUG_DETECT_FAN_ASM11", "PLUG_DETECT_FAN_ASM12",
+ /* GPORT6 */
+ "SSB_RSSD17_ALERT_N", "SSB_RSSD18_ALERT_N",
+ "SSB_RSSD19_ALERT_N", "SSB_RSSD20_ALERT_N",
+ "SSB_RSSD21_ALERT_N", "SSB_RSSD22_ALERT_N",
+ "SSB_RSSD23_ALERT_N", "SSB_RSSD24_ALERT_N",
+ /* GPORT7 */
+ "SSB_RSSD25_ALERT_N", "SSB_RSSD26_ALERT_N",
+ "SSB_RSSD27_ALERT_N", "SSB_RSSD28_ALERT_N",
+ "SSB_RSSD29_ALERT_N", "SSB_RSSD30_ALERT_N",
+ "SSB_RSSD31_ALERT_N", "SSB_RSSD32_ALERT_N";
+ pinctrl-0 = <&U65300_pins>;
+ pinctrl-names = "default";
+ U65300_pins: cfg-pins {
+ pins = "gp60", "gp61", "gp62",
+ "gp63", "gp64", "gp65", "gp66",
+ "gp67", "gp70", "gp71", "gp72",
+ "gp73", "gp74", "gp75", "gp76",
+ "gp77";
+ function = "gpio";
+ input-enable;
+ bias-pull-up;
+ };
+ };
+ };
+ i2c@2 {
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ smb_svc_pex_cpu1_led: pinctrl@20 {
+ compatible = "cypress,cy8c9540";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <ASPEED_GPIO(V, 6) IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ vdd-supply = <&p3v3_bmc_aux>;
+ reset-gpios = <&gpio0 ASPEED_GPIO(Q, 5) GPIO_ACTIVE_HIGH>;
+ gpio-reserved-ranges = <18 2>, <36 2>;
+ gpio-line-names =
+ /* GPORT0 */
+ "PLUG_DETECT_DIMM_C1E2", "PLUG_DETECT_DIMM_C1E1",
+ "PLUG_DETECT_DIMM_C1F2", "PLUG_DETECT_DIMM_C1F1",
+ "PLUG_DETECT_DIMM_C1G2", "PLUG_DETECT_DIMM_C1G1",
+ "PLUG_DETECT_DIMM_C1H2", "PLUG_DETECT_DIMM_C1H1",
+ /* GPORT1 */
+ "PLUG_DETECT_DIMM_C1D1", "PLUG_DETECT_DIMM_C1D2",
+ "PLUG_DETECT_DIMM_C1C1", "PLUG_DETECT_DIMM_C1C2",
+ "PLUG_DETECT_DIMM_C1B1", "PLUG_DETECT_DIMM_C1B2",
+ "PLUG_DETECT_DIMM_C1A1", "PLUG_DETECT_DIMM_C1A2",
+ /* GPORT2 */
+ "PEX_CPU1_EVENT_RST", "SVC_PEX_RSSD17_32_RST",
+ "", "",
+ /* GPORT3 */
+ "LED_ID_DIMM_C1E2", "LED_ID_DIMM_C1E1",
+ "LED_ID_DIMM_C1F2", "LED_ID_DIMM_C1F1",
+ "LED_ID_DIMM_C1G2", "LED_ID_DIMM_C1G1",
+ "LED_ID_DIMM_C1H2", "LED_ID_DIMM_C1H1",
+ /* GPORT4 */
+ "LED_ID_DIMM_C1A2", "LED_ID_DIMM_C1A1",
+ "LED_ID_DIMM_C1B2", "LED_ID_DIMM_C1B1",
+ "LED_ID_DIMM_C1C2", "LED_ID_DIMM_C1C1",
+ "LED_ID_DIMM_C1D2", "LED_ID_DIMM_C1D1",
+ /* GPORT5 */
+ "", "",
+ "FM_CPU1_SKTOCC_N", "LED_ID_CPU1";
+ };
+ };
+ i2c@3 {
+ reg = <3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ smb_svc_pex_fan_alert: pinctrl@20 {
+ compatible = "cypress,cy8c9560";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&bmc_pex_irq>;
+ interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ vdd-supply = <&p3v3_aux>;
+ reset-gpios = <&bmc_pex_irq 17 GPIO_ACTIVE_HIGH>;
+ gpio-reserved-ranges = <24 3>, <51 9>;
+ gpio-line-names =
+ /* GPORT0 */
+ "FAN01_SSB_ALERT_N", "FAN02_SSB_ALERT_N",
+ "FAN03_SSB_ALERT_N", "FAN04_SSB_ALERT_N",
+ "FAN05_SSB_ALERT_N", "FAN06_SSB_ALERT_N",
+ "FAN07_SSB_ALERT_N", "FAN08_SSB_ALERT_N",
+ /* GPORT1 */
+ "FAN09_SSB_ALERT_N", "FAN10_SSB_ALERT_N",
+ "FAN11_SSB_ALERT_N", "FAN12_SSB_ALERT_N",
+ "FAN13_SSB_ALERT_N", "FAN14_SSB_ALERT_N",
+ "FAN15_SSB_ALERT_N", "FAN16_SSB_ALERT_N",
+ /* GPORT2 */
+ "FAN17_SSB_ALERT_N", "FAN18_SSB_ALERT_N",
+ "FAN19_SSB_ALERT_N", "FAN20_SSB_ALERT_N",
+ /* GPORT3 */
+ "FAN21_SSB_ALERT_N", "FAN22_SSB_ALERT_N",
+ "FAN23_SSB_ALERT_N", "FAN24_SSB_ALERT_N",
+ "", "",
+ "", "FAN01_PWM_ALERT_N",
+ /* GPORT4 */
+ "FAN02_PWM_ALERT_N", "FAN03_PWM_ALERT_N",
+ "FAN04_PWM_ALERT_N", "FAN05_PWM_ALERT_N",
+ "FAN06_PWM_ALERT_N", "FAN07_PWM_ALERT_N",
+ "FAN08_PWM_ALERT_N", "FAN09_PWM_ALERT_N",
+ /* GPORT5 */
+ "FAN10_PWM_ALERT_N", "FAN11_PWM_ALERT_N",
+ "FAN12_PWM_ALERT_N", "FAN13_PWM_ALERT_N",
+ "FAN14_PWM_ALERT_N", "FAN15_PWM_ALERT_N",
+ "FAN16_PWM_ALERT_N", "FAN17_PWM_ALERT_N",
+ /* GPORT6 */
+ "FAN18_PWM_ALERT_N", "FAN19_PWM_ALERT_N",
+ "FAN20_PWM_ALERT_N", "FAN21_PWM_ALERT_N",
+ "FAN22_PWM_ALERT_N", "FAN23_PWM_ALERT_N",
+ "FAN24_PWM_ALERT_N", "",
+ /* GPORT7 */
+ "", "",
+ "", "",
+ "", "",
+ "", "";
+ pinctrl-0 = <&U65600_pins>;
+ pinctrl-names = "default";
+ U65600_pins: cfg-pins {
+ pins = "gp00", "gp01", "gp02",
+ "gp03", "gp04", "gp05", "gp06",
+ "gp07", "gp10", "gp11", "gp12",
+ "gp13", "gp14", "gp15", "gp16",
+ "gp17", "gp20", "gp21", "gp22",
+ "gp23", "gp30", "gp31", "gp32",
+ "gp33", "gp37", "gp40", "gp41",
+ "gp42", "gp43", "gp44", "gp45",
+ "gp46", "gp47", "gp50", "gp51",
+ "gp52", "gp53", "gp54", "gp55",
+ "gp56", "gp57", "gp60", "gp61",
+ "gp62", "gp63", "gp64", "gp65",
+ "gp66";
+ function = "gpio";
+ input-enable;
+ bias-pull-up;
+ };
+ };
+ };
+ i2c@4 {
+ reg = <4>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ smb_svc_pex_cpu2_led: pinctrl@20 {
+ compatible = "cypress,cy8c9540";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <ASPEED_GPIO(V, 5) IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ vdd-supply = <&p3v3_bmc_aux>;
+ reset-gpios = <&gpio0 ASPEED_GPIO(Q, 6) GPIO_ACTIVE_HIGH>;
+ gpio-reserved-ranges = <17 3>, <36 2>;
+ gpio-line-names =
+ /* GPORT0 */
+ "PLUG_DETECT_DIMM_C2E2", "PLUG_DETECT_DIMM_C2E1",
+ "PLUG_DETECT_DIMM_C2F2", "PLUG_DETECT_DIMM_C2F1",
+ "PLUG_DETECT_DIMM_C2G2", "PLUG_DETECT_DIMM_C2G1",
+ "PLUG_DETECT_DIMM_C2H2", "PLUG_DETECT_DIMM_C2H1",
+ /* GPORT1 */
+ "PLUG_DETECT_DIMM_C2D1", "PLUG_DETECT_DIMM_C2D2",
+ "PLUG_DETECT_DIMM_C2C1", "PLUG_DETECT_DIMM_C2C2",
+ "PLUG_DETECT_DIMM_C2B1", "PLUG_DETECT_DIMM_C2B2",
+ "PLUG_DETECT_DIMM_C2A1", "PLUG_DETECT_DIMM_C2A2",
+ /* GPORT2 */
+ "PEX_CPU2_EVENT_RST", "",
+ "", "",
+ /* GPORT3 */
+ "LED_ID_DIMM_C2E2", "LED_ID_DIMM_C2E1",
+ "LED_ID_DIMM_C2F2", "LED_ID_DIMM_C2F1",
+ "LED_ID_DIMM_C2G2", "LED_ID_DIMM_C2G1",
+ "LED_ID_DIMM_C2H2", "LED_ID_DIMM_C2H1",
+ /* GPORT4 */
+ "LED_ID_DIMM_C2A2", "LED_ID_DIMM_C2A1",
+ "LED_ID_DIMM_C2B2", "LED_ID_DIMM_C2B1",
+ "LED_ID_DIMM_C2C2", "LED_ID_DIMM_C2C1",
+ "LED_ID_DIMM_C2D2", "LED_ID_DIMM_C2D1",
+ /* GPORT5 */
+ "", "",
+ "FM_CPU2_SKTOCC_N", "LED_ID_CPU2";
+ };
+ };
+ i2c@5 {
+ reg = <5>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ smb_svc_pex_cpu3_led: pinctrl@20 {
+ compatible = "cypress,cy8c9540";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <ASPEED_GPIO(V, 3) IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ vdd-supply = <&p3v3_bmc_aux>;
+ reset-gpios = <&gpio0 ASPEED_GPIO(Q, 7) GPIO_ACTIVE_HIGH>;
+ gpio-reserved-ranges = <17 3>;
+ gpio-line-names =
+ /* GPORT0 */
+ "PLUG_DETECT_DIMM_C3E2", "PLUG_DETECT_DIMM_C3E1",
+ "PLUG_DETECT_DIMM_C3F2", "PLUG_DETECT_DIMM_C3F1",
+ "PLUG_DETECT_DIMM_C3G2", "PLUG_DETECT_DIMM_C3G1",
+ "PLUG_DETECT_DIMM_C3H2", "PLUG_DETECT_DIMM_C3H1",
+ /* GPORT1 */
+ "PLUG_DETECT_DIMM_C3D1", "PLUG_DETECT_DIMM_C3D2",
+ "PLUG_DETECT_DIMM_C3C1", "PLUG_DETECT_DIMM_C3C2",
+ "PLUG_DETECT_DIMM_C3B1", "PLUG_DETECT_DIMM_C3B2",
+ "PLUG_DETECT_DIMM_C3A1", "PLUG_DETECT_DIMM_C3A2",
+ /* GPORT2 */
+ "PEX_CPU3_EVENT_RST", "",
+ "", "",
+ /* GPORT3 */
+ "LED_ID_DIMM_C3E2", "LED_ID_DIMM_C3E1",
+ "LED_ID_DIMM_C3F2", "LED_ID_DIMM_C3F1",
+ "LED_ID_DIMM_C3G2", "LED_ID_DIMM_C3G1",
+ "LED_ID_DIMM_C3H2", "LED_ID_DIMM_C3H1",
+ /* GPORT4 */
+ "LED_ID_DIMM_C3A2", "LED_ID_DIMM_C3A1",
+ "LED_ID_DIMM_C3B2", "LED_ID_DIMM_C3B1",
+ "LED_ID_DIMM_C3C2", "LED_ID_DIMM_C3C1",
+ "LED_ID_DIMM_C3D2", "LED_ID_DIMM_C3D1",
+ /* GPORT5 */
+ "LED_PWR_DWR_FRNT", "LED_ID_DWR_FRNT_P",
+ "FM_CPU3_SKTOCC_N", "LED_ID_CPU3";
+ };
+ };
+ i2c@6 {
+ reg = <6>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ smb_svc_pex_cpu0_led: pinctrl@20 {
+ compatible = "cypress,cy8c9540";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <ASPEED_GPIO(O, 3) IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ vdd-supply = <&p3v3_bmc_aux>;
+ reset-gpios = <&gpio0 ASPEED_GPIO(Q, 4) GPIO_ACTIVE_HIGH>;
+ gpio-reserved-ranges = <18 2>, <36 2>;
+ gpio-line-names =
+ /* GPORT0 */
+ "PLUG_DETECT_DIMM_C0E2", "PLUG_DETECT_DIMM_C0E1",
+ "PLUG_DETECT_DIMM_C0F2", "PLUG_DETECT_DIMM_C0F1",
+ "PLUG_DETECT_DIMM_C0G2", "PLUG_DETECT_DIMM_C0G1",
+ "PLUG_DETECT_DIMM_C0H2", "PLUG_DETECT_DIMM_C0H1",
+ /* GPORT1 */
+ "PLUG_DETECT_DIMM_C0D1", "PLUG_DETECT_DIMM_C0D2",
+ "PLUG_DETECT_DIMM_C0C1", "PLUG_DETECT_DIMM_C0C2",
+ "PLUG_DETECT_DIMM_C0B1", "PLUG_DETECT_DIMM_C0B2",
+ "PLUG_DETECT_DIMM_C0A1", "PLUG_DETECT_DIMM_C0A2",
+ /* GPORT2 */
+ "PEX_CPU0_EVENT_RST", "SVC_PEX_RSSD01_16_RST",
+ "", "",
+ /* GPORT3 */
+ "LED_ID_DIMM_C0E2", "LED_ID_DIMM_C0E1",
+ "LED_ID_DIMM_C0F2", "LED_ID_DIMM_C0F1",
+ "LED_ID_DIMM_C0G2", "LED_ID_DIMM_C0G1",
+ "LED_ID_DIMM_C0H2", "LED_ID_DIMM_C0H1",
+ /* GPORT4 */
+ "LED_ID_DIMM_C0A2", "LED_ID_DIMM_C0A1",
+ "LED_ID_DIMM_C0B2", "LED_ID_DIMM_C0B1",
+ "LED_ID_DIMM_C0C2", "LED_ID_DIMM_C0C1",
+ "LED_ID_DIMM_C0D2", "LED_ID_DIMM_C0D1",
+ /* GPORT5 */
+ "", "",
+ "FM_CPU0_SKTOCC_N", "LED_ID_CPU0";
+ };
+ };
+};
+
+&i2c9 {
+ status = "okay";
+
+ p1v2_bmc_aux_mon: pmic@60 {
+ compatible = "maxim,max8952";
+ reg = <0x60>;
+ max8952,default-mode = <3>;
+ max8952,dvs-mode-microvolt = <1100000>, <1100000>,
+ <1100000>, <1100000>;
+ max8952,sync-freq = <0>;
+ max8952,ramp-speed = <0>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+};
+
+&i2cmux8 {
+ i2c@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fan10_ssb: regulator@3a {
+ compatible = "maxim,max5978";
+ reg = <0x3a>;
+ vss1-supply = <&p12v>;
+ interrupt-parent = <&smb_svc_pex_fan_alert>;
+ interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+
+ regulators {
+ sw0_fan10_ssb: sw0 {
+ regulator-name = "fan10_supply";
+ shunt-resistor-micro-ohms = <10000>;
+ regulator-over-current-protection;
+ regulator-oc-protection-microamp = <3400000>;
+ regulator-enable-ramp-delay = <1000>;
+ };
+ };
+ };
+
+ };
+ i2c@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fan12_ssb: regulator@3a {
+ compatible = "maxim,max5978";
+ reg = <0x3a>;
+ vss1-supply = <&p12v>;
+ interrupt-parent = <&smb_svc_pex_fan_alert>;
+ interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+
+ regulators {
+ sw0_fan12_ssb: sw0 {
+ regulator-name = "fan12_supply";
+ shunt-resistor-micro-ohms = <10000>;
+ regulator-over-current-protection;
+ regulator-oc-protection-microamp = <3400000>;
+ regulator-enable-ramp-delay = <1000>;
+ };
+ };
+ };
+
+ };
+ i2c@2 {
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fan14_ssb: regulator@3a {
+ compatible = "maxim,max5978";
+ reg = <0x3a>;
+ vss1-supply = <&p12v>;
+ interrupt-parent = <&smb_svc_pex_fan_alert>;
+ interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
+
+ regulators {
+ sw0_fan14_ssb: sw0 {
+ regulator-name = "fan14_supply";
+ shunt-resistor-micro-ohms = <10000>;
+ regulator-over-current-protection;
+ regulator-oc-protection-microamp = <3400000>;
+ regulator-enable-ramp-delay = <1000>;
+ };
+ };
+ };
+ };
+ i2c@3 {
+ reg = <3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fan16_ssb: regulator@3a {
+ compatible = "maxim,max5978";
+ reg = <0x3a>;
+ vss1-supply = <&p12v>;
+ interrupt-parent = <&smb_svc_pex_fan_alert>;
+ interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
+
+ regulators {
+ sw0_fan16_ssb: sw0 {
+ regulator-name = "fan16_supply";
+ shunt-resistor-micro-ohms = <10000>;
+ regulator-over-current-protection;
+ regulator-oc-protection-microamp = <3400000>;
+ regulator-enable-ramp-delay = <1000>;
+ };
+ };
+ };
+ };
+ i2c@4 {
+ reg = <4>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fan18_ssb: regulator@3a {
+ compatible = "maxim,max5978";
+ reg = <0x3a>;
+ vss1-supply = <&p12v>;
+ interrupt-parent = <&smb_svc_pex_fan_alert>;
+ interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
+
+ regulators {
+ sw0_fan18_ssb: sw0 {
+ regulator-name = "fan18_supply";
+ shunt-resistor-micro-ohms = <10000>;
+ regulator-over-current-protection;
+ regulator-oc-protection-microamp = <3400000>;
+ regulator-enable-ramp-delay = <1000>;
+ };
+ };
+ };
+ };
+ i2c@5 {
+ reg = <5>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fan20_ssb: regulator@3a {
+ compatible = "maxim,max5978";
+ reg = <0x3a>;
+ vss1-supply = <&p12v>;
+ interrupt-parent = <&smb_svc_pex_fan_alert>;
+ interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
+
+ regulators {
+ sw0_fan20_ssb: sw0 {
+ regulator-name = "fan20_supply";
+ shunt-resistor-micro-ohms = <10000>;
+ regulator-over-current-protection;
+ regulator-oc-protection-microamp = <3400000>;
+ regulator-enable-ramp-delay = <1000>;
+ };
+ };
+ };
+ };
+ i2c@6 {
+ reg = <6>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fan22_ssb: regulator@3a {
+ compatible = "maxim,max5978";
+ reg = <0x3a>;
+ vss1-supply = <&p12v>;
+ interrupt-parent = <&smb_svc_pex_fan_alert>;
+ interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
+
+ regulators {
+ sw0_fan22_ssb: sw0 {
+ regulator-name = "fan22_supply";
+ shunt-resistor-micro-ohms = <10000>;
+ regulator-over-current-protection;
+ regulator-oc-protection-microamp = <3400000>;
+ regulator-enable-ramp-delay = <1000>;
+ };
+ };
+ };
+ };
+ i2c@7 {
+ reg = <7>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fan24_ssb: regulator@3a {
+ compatible = "maxim,max5978";
+ reg = <0x3a>;
+ vss1-supply = <&p12v>;
+ interrupt-parent = <&smb_svc_pex_fan_alert>;
+ interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
+
+ regulators {
+ sw0_fan24_ssb: sw0 {
+ regulator-name = "fan24_supply";
+ shunt-resistor-micro-ohms = <10000>;
+ regulator-over-current-protection;
+ regulator-oc-protection-microamp = <3400000>;
+ regulator-enable-ramp-delay = <1000>;
+ };
+ };
+ };
+ };
+};
+
+&i2cmux7 {
+ i2c@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fan17_ssb: regulator@3a {
+ compatible = "maxim,max5978";
+ reg = <0x3a>;
+ vss1-supply = <&p12v>;
+ interrupt-parent = <&smb_svc_pex_fan_alert>;
+ interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
+
+ regulators {
+ sw0_fan17_ssb: sw0 {
+ regulator-name = "fan17_supply";
+ shunt-resistor-micro-ohms = <10000>;
+ regulator-over-current-protection;
+ regulator-oc-protection-microamp = <3400000>;
+ regulator-enable-ramp-delay = <1000>;
+ };
+ };
+ };
+ };
+ i2c@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fan19_ssb: regulator@3a {
+ compatible = "maxim,max5978";
+ reg = <0x3a>;
+ vss1-supply = <&p12v>;
+ interrupt-parent = <&smb_svc_pex_fan_alert>;
+ interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
+
+ regulators {
+ sw0_fan19_ssb: sw0 {
+ regulator-name = "fan19_supply";
+ shunt-resistor-micro-ohms = <10000>;
+ regulator-over-current-protection;
+ regulator-oc-protection-microamp = <3400000>;
+ regulator-enable-ramp-delay = <1000>;
+ };
+ };
+ };
+ };
+ i2c@2 {
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fan21_ssb: regulator@3a {
+ compatible = "maxim,max5978";
+ reg = <0x3a>;
+ vss1-supply = <&p12v>;
+ interrupt-parent = <&smb_svc_pex_fan_alert>;
+ interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
+
+ regulators {
+ sw0_fan21_ssb: sw0 {
+ regulator-name = "fan21_supply";
+ shunt-resistor-micro-ohms = <10000>;
+ regulator-over-current-protection;
+ regulator-oc-protection-microamp = <3400000>;
+ regulator-enable-ramp-delay = <1000>;
+ };
+ };
+ };
+ };
+ i2c@3 {
+ reg = <3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fan23_ssb: regulator@3a {
+ compatible = "maxim,max5978";
+ reg = <0x3a>;
+ vss1-supply = <&p12v>;
+ interrupt-parent = <&smb_svc_pex_fan_alert>;
+ interrupts = <22 IRQ_TYPE_LEVEL_LOW>;
+
+ regulators {
+ sw0_fan23_ssb: sw0 {
+ regulator-name = "fan23_supply";
+ shunt-resistor-micro-ohms = <10000>;
+ regulator-over-current-protection;
+ regulator-oc-protection-microamp = <3400000>;
+ regulator-enable-ramp-delay = <1000>;
+ };
+ };
+ };
+ };
+ i2c@4 {
+ reg = <4>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fan02_ssb: regulator@3a {
+ compatible = "maxim,max5978";
+ reg = <0x3a>;
+ vss1-supply = <&p12v>;
+ interrupt-parent = <&smb_svc_pex_fan_alert>;
+ interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+
+ regulators {
+ sw0_fan02_ssb: sw0 {
+ regulator-name = "fan02_supply";
+ shunt-resistor-micro-ohms = <10000>;
+ regulator-over-current-protection;
+ regulator-oc-protection-microamp = <3400000>;
+ regulator-enable-ramp-delay = <1000>;
+ };
+ };
+ };
+ };
+ i2c@5 {
+ reg = <5>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fan04_ssb: regulator@3a {
+ compatible = "maxim,max5978";
+ reg = <0x3a>;
+ vss1-supply = <&p12v>;
+ interrupt-parent = <&smb_svc_pex_fan_alert>;
+ interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+
+ regulators {
+ sw0_fan04_ssb: sw0 {
+ regulator-name = "fan04_supply";
+ shunt-resistor-micro-ohms = <10000>;
+ regulator-over-current-protection;
+ regulator-oc-protection-microamp = <3400000>;
+ regulator-enable-ramp-delay = <1000>;
+ };
+ };
+ };
+ };
+ i2c@6 {
+ reg = <6>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fan06_ssb: regulator@3a {
+ compatible = "maxim,max5978";
+ reg = <0x3a>;
+ vss1-supply = <&p12v>;
+ interrupt-parent = <&smb_svc_pex_fan_alert>;
+ interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
+
+ regulators {
+ sw0_fan06_ssb: sw0 {
+ regulator-name = "fan06_supply";
+ shunt-resistor-micro-ohms = <10000>;
+ regulator-over-current-protection;
+ regulator-oc-protection-microamp = <3400000>;
+ regulator-enable-ramp-delay = <1000>;
+ };
+ };
+ };
+ };
+ i2c@7 {
+ reg = <7>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fan08_ssb: regulator@3a {
+ compatible = "maxim,max5978";
+ reg = <0x3a>;
+ vss1-supply = <&p12v>;
+ interrupt-parent = <&smb_svc_pex_fan_alert>;
+ interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+
+ regulators {
+ sw0_fan08_ssb: sw0 {
+ regulator-name = "fan08_supply";
+ shunt-resistor-micro-ohms = <10000>;
+ regulator-over-current-protection;
+ regulator-oc-protection-microamp = <3400000>;
+ regulator-enable-ramp-delay = <1000>;
+ };
+ };
+ };
+ };
+};
+
+&i2cmux6 {
+ i2c@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fan01_ssb: regulator@3a {
+ compatible = "maxim,max5978";
+ reg = <0x3a>;
+ vss1-supply = <&p12v>;
+ interrupt-parent = <&smb_svc_pex_fan_alert>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+ regulators {
+ sw0_fan01_ssb: sw0 {
+ regulator-name = "fan01_supply";
+ shunt-resistor-micro-ohms = <10000>;
+ regulator-over-current-protection;
+ regulator-oc-protection-microamp = <3400000>;
+ regulator-enable-ramp-delay = <1000>;
+ };
+ };
+ };
+ };
+ i2c@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fan03_ssb: regulator@3a {
+ compatible = "maxim,max5978";
+ reg = <0x3a>;
+ vss1-supply = <&p12v>;
+ interrupt-parent = <&smb_svc_pex_fan_alert>;
+ interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+
+ regulators {
+ sw0_fan03_ssb: sw0 {
+ regulator-name = "fan03_supply";
+
+ shunt-resistor-micro-ohms = <10000>;
+ regulator-over-current-protection;
+ regulator-oc-protection-microamp = <3400000>;
+ regulator-enable-ramp-delay = <1000>;
+ };
+ };
+ };
+ };
+ i2c@2 {
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fan05_ssb: regulator@3a {
+ compatible = "maxim,max5978";
+ reg = <0x3a>;
+ vss1-supply = <&p12v>;
+ interrupt-parent = <&smb_svc_pex_fan_alert>;
+ interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+
+ regulators {
+ sw0_fan05_ssb: sw0 {
+ regulator-name = "fan05_supply";
+ shunt-resistor-micro-ohms = <10000>;
+ regulator-over-current-protection;
+ regulator-oc-protection-microamp = <3400000>;
+ regulator-enable-ramp-delay = <1000>;
+ };
+ };
+ };
+ };
+ i2c@3 {
+ reg = <3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fan07_ssb: regulator@3a {
+ compatible = "maxim,max5978";
+ reg = <0x3a>;
+ vss1-supply = <&p12v>;
+ interrupt-parent = <&smb_svc_pex_fan_alert>;
+ interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
+
+ regulators {
+ sw0_fan07_ssb: sw0 {
+ regulator-name = "fan07_supply";
+ shunt-resistor-micro-ohms = <10000>;
+ regulator-over-current-protection;
+ regulator-oc-protection-microamp = <3400000>;
+ regulator-enable-ramp-delay = <1000>;
+ };
+ };
+ };
+ };
+ i2c@4 {
+ reg = <4>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fan09_ssb: regulator@3a {
+ compatible = "maxim,max5978";
+ reg = <0x3a>;
+ vss1-supply = <&p12v>;
+ interrupt-parent = <&smb_svc_pex_fan_alert>;
+ interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+
+ regulators {
+ sw0_fan09_ssb: sw0 {
+ regulator-name = "fan09_supply";
+ shunt-resistor-micro-ohms = <10000>;
+ regulator-over-current-protection;
+ regulator-oc-protection-microamp = <3400000>;
+ regulator-enable-ramp-delay = <1000>;
+ };
+ };
+ };
+ };
+ i2c@5 {
+ reg = <5>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fan11_ssb: regulator@3a {
+ compatible = "maxim,max5978";
+ reg = <0x3a>;
+ vss1-supply = <&p12v>;
+ interrupt-parent = <&smb_svc_pex_fan_alert>;
+ interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
+
+ regulators {
+ sw0_fan11_ssb: sw0 {
+ regulator-name = "fan11_supply";
+ shunt-resistor-micro-ohms = <10000>;
+ regulator-over-current-protection;
+ regulator-oc-protection-microamp = <3400000>;
+ regulator-enable-ramp-delay = <1000>;
+ };
+ };
+ };
+ };
+ i2c@6 {
+ reg = <6>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fan13_ssb: regulator@3a {
+ compatible = "maxim,max5978";
+ reg = <0x3a>;
+ vss1-supply = <&p12v>;
+ interrupt-parent = <&smb_svc_pex_fan_alert>;
+ interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
+
+ regulators {
+ sw0_fan13_ssb: sw0 {
+ regulator-name = "fan13_supply";
+ shunt-resistor-micro-ohms = <10000>;
+ regulator-over-current-protection;
+ regulator-oc-protection-microamp = <3400000>;
+ regulator-enable-ramp-delay = <1000>;
+ };
+ };
+ };
+ };
+ i2c@7 {
+ reg = <7>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fan15_ssb: regulator@3a {
+ compatible = "maxim,max5978";
+ reg = <0x3a>;
+ vss1-supply = <&p12v>;
+ interrupt-parent = <&smb_svc_pex_fan_alert>;
+ interrupts = <14 IRQ_TYPE_LEVEL_LOW>;
+
+ regulators {
+ sw0_fan15_ssb: sw0 {
+ regulator-name = "fan15_supply";
+ shunt-resistor-micro-ohms = <10000>;
+ regulator-over-current-protection;
+ regulator-oc-protection-microamp = <3400000>;
+ regulator-enable-ramp-delay = <1000>;
+ };
+ };
+ };
+
+ };
+};
+
+&i2cmux9 {
+ i2c@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ssb_rssd19: regulator@3a {
+ compatible = "maxim,max5970";
+ reg = <0x3a>;
+ interrupt-parent = <&smb_svc_pex_rssd17_32>;
+ interrupts = <46 IRQ_TYPE_LEVEL_LOW>;
+
+ vss1-supply = <&p3v3_aux>;
+ vss2-supply = <&p12v>;
+
+ leds {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@0 {
+ reg = <0>;
+ label = "rssd19:green:power";
+ default-state = "off";
+ };
+ };
+
+ regulators {
+ sw0_ssb_rssd19: sw0 {
+ regulator-name = "rssd19_12v";
+ shunt-resistor-micro-ohms = <9000>;
+ regulator-over-current-protection;
+ regulator-oc-protection-microamp = <4500000>;
+ regulator-enable-ramp-delay = <1000>;
+ };
+ sw1_ssb_rssd19: sw1 {
+ regulator-name = "rssd19_3v3";
+ shunt-resistor-micro-ohms = <100000>;
+ regulator-over-current-protection;
+ regulator-oc-protection-microamp = <410000>;
+ regulator-enable-ramp-delay = <1000>;
+ };
+ };
+ };
+ };
+ i2c@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ssb_rssd18: regulator@3a {
+ compatible = "maxim,max5970";
+ reg = <0x3a>;
+ interrupt-parent = <&smb_svc_pex_rssd17_32>;
+ interrupts = <45 IRQ_TYPE_LEVEL_LOW>;
+
+ vss1-supply = <&p3v3_aux>;
+ vss2-supply = <&p12v>;
+
+ leds {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@0 {
+ reg = <0>;
+ label = "rssd18:green:power";
+ default-state = "off";
+ };
+ };
+
+ regulators {
+ sw0_ssb_rssd18: sw0 {
+ regulator-name = "rssd18_12v";
+ shunt-resistor-micro-ohms = <9000>;
+ regulator-over-current-protection;
+ regulator-oc-protection-microamp = <4500000>;
+ regulator-enable-ramp-delay = <1000>;
+ };
+ sw1_ssb_rssd18: sw1 {
+ regulator-name = "rssd18_3v3";
+ shunt-resistor-micro-ohms = <100000>;
+ regulator-over-current-protection;
+ regulator-oc-protection-microamp = <410000>;
+ regulator-enable-ramp-delay = <1000>;
+ };
+ };
+ };
+ };
+ i2c@2 {
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ssb_rssd17: regulator@3a {
+ compatible = "maxim,max5970";
+ reg = <0x3a>;
+ interrupt-parent = <&smb_svc_pex_rssd17_32>;
+ interrupts = <44 IRQ_TYPE_LEVEL_LOW>;
+
+ vss1-supply = <&p3v3_aux>;
+ vss2-supply = <&p12v>;
+
+ leds {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@0 {
+ reg = <0>;
+ label = "rssd17:green:power";
+ default-state = "off";
+ };
+ };
+
+ regulators {
+ sw0_ssb_rssd17: sw0 {
+ regulator-name = "rssd17_12v";
+ shunt-resistor-micro-ohms = <9000>;
+ regulator-over-current-protection;
+ regulator-oc-protection-microamp = <4500000>;
+ regulator-enable-ramp-delay = <1000>;
+ };
+ sw1_ssb_rssd17: sw1 {
+ regulator-name = "rssd17_3v3";
+ shunt-resistor-micro-ohms = <100000>;
+ regulator-over-current-protection;
+ regulator-oc-protection-microamp = <410000>;
+ regulator-enable-ramp-delay = <1000>;
+ };
+ };
+ };
+ };
+ i2c@3 {
+ reg = <3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ssb_rssd20: regulator@3a {
+ compatible = "maxim,max5970";
+ reg = <0x3a>;
+ interrupt-parent = <&smb_svc_pex_rssd17_32>;
+ interrupts = <47 IRQ_TYPE_LEVEL_LOW>;
+
+ vss1-supply = <&p3v3_aux>;
+ vss2-supply = <&p12v>;
+
+ leds {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@0 {
+ reg = <0>;
+ label = "rssd20:green:power";
+ default-state = "off";
+ };
+ };
+
+ regulators {
+ sw0_ssb_rssd20: sw0 {
+ regulator-name = "rssd20_12v";
+ shunt-resistor-micro-ohms = <9000>;
+ regulator-over-current-protection;
+ regulator-oc-protection-microamp = <4500000>;
+ regulator-enable-ramp-delay = <1000>;
+ };
+ sw1_ssb_rssd20: sw1 {
+ regulator-name = "rssd20_3v3";
+ shunt-resistor-micro-ohms = <100000>;
+ regulator-over-current-protection;
+ regulator-oc-protection-microamp = <410000>;
+ regulator-enable-ramp-delay = <1000>;
+ };
+ };
+ };
+ };
+ i2c@4 {
+ reg = <4>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ssb_rssd21: regulator@3a {
+ compatible = "maxim,max5970";
+ reg = <0x3a>;
+ interrupt-parent = <&smb_svc_pex_rssd17_32>;
+ interrupts = <48 IRQ_TYPE_LEVEL_LOW>;
+
+ vss1-supply = <&p3v3_aux>;
+ vss2-supply = <&p12v>;
+
+ leds {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@0 {
+ reg = <0>;
+ label = "rssd21:green:power";
+ default-state = "off";
+ };
+ };
+
+ regulators {
+ sw0_ssb_rssd21: sw0 {
+ regulator-name = "rssd21_12v";
+ shunt-resistor-micro-ohms = <9000>;
+ regulator-over-current-protection;
+ regulator-oc-protection-microamp = <4500000>;
+ regulator-enable-ramp-delay = <1000>;
+ };
+ sw1_ssb_rssd21: sw1 {
+ regulator-name = "rssd21_3v3";
+ shunt-resistor-micro-ohms = <100000>;
+ regulator-over-current-protection;
+ regulator-oc-protection-microamp = <410000>;
+ regulator-enable-ramp-delay = <1000>;
+ };
+ };
+ };
+ };
+ i2c@5 {
+ reg = <5>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ssb_rssd22: regulator@3a {
+ compatible = "maxim,max5970";
+ reg = <0x3a>;
+ interrupt-parent = <&smb_svc_pex_rssd17_32>;
+ interrupts = <49 IRQ_TYPE_LEVEL_LOW>;
+
+ vss1-supply = <&p3v3_aux>;
+ vss2-supply = <&p12v>;
+
+ leds {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@0 {
+ reg = <0>;
+ label = "rssd22:green:power";
+ default-state = "off";
+ };
+ };
+
+ regulators {
+ sw0_ssb_rssd22: sw0 {
+ regulator-name = "rssd22_12v";
+ shunt-resistor-micro-ohms = <9000>;
+ regulator-over-current-protection;
+ regulator-oc-protection-microamp = <4500000>;
+ regulator-enable-ramp-delay = <1000>;
+ };
+ sw1_ssb_rssd22: sw1 {
+ regulator-name = "rssd22_3v3";
+ shunt-resistor-micro-ohms = <100000>;
+ regulator-over-current-protection;
+ regulator-oc-protection-microamp = <410000>;
+ regulator-enable-ramp-delay = <1000>;
+ };
+ };
+ };
+ };
+ i2c@6 {
+ reg = <6>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ssb_rssd24: regulator@3a {
+ compatible = "maxim,max5970";
+ reg = <0x3a>;
+ interrupt-parent = <&smb_svc_pex_rssd17_32>;
+ interrupts = <51 IRQ_TYPE_LEVEL_LOW>;
+
+ vss1-supply = <&p3v3_aux>;
+ vss2-supply = <&p12v>;
+
+ leds {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@0 {
+ reg = <0>;
+ label = "rssd24:green:power";
+ default-state = "off";
+ };
+ };
+
+ regulators {
+ sw0_ssb_rssd24: sw0 {
+ regulator-name = "rssd24_12v";
+ shunt-resistor-micro-ohms = <9000>;
+ regulator-over-current-protection;
+ regulator-oc-protection-microamp = <4500000>;
+ regulator-enable-ramp-delay = <1000>;
+ };
+ sw1_ssb_rssd24: sw1 {
+ regulator-name = "rssd24_3v3";
+ shunt-resistor-micro-ohms = <100000>;
+ regulator-over-current-protection;
+ regulator-oc-protection-microamp = <410000>;
+ regulator-enable-ramp-delay = <1000>;
+ };
+ };
+ };
+ };
+ i2c@7 {
+ reg = <7>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ssb_rssd23: regulator@3a {
+ compatible = "maxim,max5970";
+ reg = <0x3a>;
+ interrupt-parent = <&smb_svc_pex_rssd17_32>;
+ interrupts = <50 IRQ_TYPE_LEVEL_LOW>;
+
+ vss1-supply = <&p3v3_aux>;
+ vss2-supply = <&p12v>;
+
+ leds {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@0 {
+ reg = <0>;
+ label = "rssd23:green:power";
+ default-state = "off";
+ };
+ };
+
+ regulators {
+ sw0_ssb_rssd23: sw0 {
+ regulator-name = "rssd23_12v";
+ shunt-resistor-micro-ohms = <9000>;
+ regulator-over-current-protection;
+ regulator-oc-protection-microamp = <4500000>;
+ regulator-enable-ramp-delay = <1000>;
+ };
+ sw1_ssb_rssd23: sw1 {
+ regulator-name = "rssd23_3v3";
+ shunt-resistor-micro-ohms = <100000>;
+ regulator-over-current-protection;
+ regulator-oc-protection-microamp = <410000>;
+ regulator-enable-ramp-delay = <1000>;
+ };
+ };
+ };
+ };
+};
+
+&i2cmux10 {
+ i2c@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ssb_rssd25: regulator@3a {
+ compatible = "maxim,max5970";
+ reg = <0x3a>;
+ interrupt-parent = <&smb_svc_pex_rssd17_32>;
+ interrupts = <52 IRQ_TYPE_LEVEL_LOW>;
+
+ vss1-supply = <&p3v3_aux>;
+ vss2-supply = <&p12v>;
+
+ leds {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@0 {
+ reg = <0>;
+ label = "rssd25:green:power";
+ default-state = "off";
+ };
+ };
+
+ regulators {
+ sw0_ssb_rssd25: sw0 {
+ regulator-name = "rssd25_12v";
+ shunt-resistor-micro-ohms = <9000>;
+ regulator-over-current-protection;
+ regulator-oc-protection-microamp = <4500000>;
+ regulator-enable-ramp-delay = <1000>;
+ };
+ sw1_ssb_rssd25: sw1 {
+ regulator-name = "rssd25_3v3";
+ shunt-resistor-micro-ohms = <100000>;
+ regulator-over-current-protection;
+ regulator-oc-protection-microamp = <410000>;
+ regulator-enable-ramp-delay = <1000>;
+ };
+ };
+ };
+ };
+ i2c@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ssb_rssd26: regulator@3a {
+ compatible = "maxim,max5970";
+ reg = <0x3a>;
+ interrupt-parent = <&smb_svc_pex_rssd17_32>;
+ interrupts = <53 IRQ_TYPE_LEVEL_LOW>;
+
+ vss1-supply = <&p3v3_aux>;
+ vss2-supply = <&p12v>;
+
+ leds {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@0 {
+ reg = <0>;
+ label = "rssd26:green:power";
+ default-state = "off";
+ };
+ };
+
+ regulators {
+ sw0_ssb_rssd26: sw0 {
+ regulator-name = "rssd26_12v";
+ shunt-resistor-micro-ohms = <9000>;
+ regulator-over-current-protection;
+ regulator-oc-protection-microamp = <4500000>;
+ regulator-enable-ramp-delay = <1000>;
+ };
+ sw1_ssb_rssd26: sw1 {
+ regulator-name = "rssd26_3v3";
+ shunt-resistor-micro-ohms = <100000>;
+ regulator-over-current-protection;
+ regulator-oc-protection-microamp = <410000>;
+ regulator-enable-ramp-delay = <1000>;
+ };
+ };
+ };
+ };
+ i2c@2 {
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ssb_rssd27: regulator@3a {
+ compatible = "maxim,max5970";
+ reg = <0x3a>;
+ interrupt-parent = <&smb_svc_pex_rssd17_32>;
+ interrupts = <54 IRQ_TYPE_LEVEL_LOW>;
+
+ vss1-supply = <&p3v3_aux>;
+ vss2-supply = <&p12v>;
+
+ leds {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@0 {
+ reg = <0>;
+ label = "rssd27:green:power";
+ default-state = "off";
+ };
+ };
+
+ regulators {
+ sw0_ssb_rssd27: sw0 {
+ regulator-name = "rssd27_12v";
+ shunt-resistor-micro-ohms = <9000>;
+ regulator-over-current-protection;
+ regulator-oc-protection-microamp = <4500000>;
+ regulator-enable-ramp-delay = <1000>;
+ };
+ sw1_ssb_rssd27: sw1 {
+ regulator-name = "rssd27_3v3";
+ shunt-resistor-micro-ohms = <100000>;
+ regulator-over-current-protection;
+ regulator-oc-protection-microamp = <410000>;
+ regulator-enable-ramp-delay = <1000>;
+ };
+ };
+ };
+ };
+ i2c@3 {
+ reg = <3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ssb_rssd32: regulator@3a {
+ compatible = "maxim,max5970";
+ reg = <0x3a>;
+ interrupt-parent = <&smb_svc_pex_rssd17_32>;
+ interrupts = <59 IRQ_TYPE_LEVEL_LOW>;
+
+ vss1-supply = <&p3v3_aux>;
+ vss2-supply = <&p12v>;
+
+ leds {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@0 {
+ reg = <0>;
+ label = "rssd32:green:power";
+ default-state = "off";
+ };
+ };
+
+ regulators {
+ sw0_ssb_rssd32: sw0 {
+ regulator-name = "rssd32_12v";
+ shunt-resistor-micro-ohms = <9000>;
+ regulator-over-current-protection;
+ regulator-oc-protection-microamp = <4500000>;
+ regulator-enable-ramp-delay = <1000>;
+ };
+ sw1_ssb_rssd32: sw1 {
+ regulator-name = "rssd32_3v3";
+ shunt-resistor-micro-ohms = <100000>;
+ regulator-over-current-protection;
+ regulator-oc-protection-microamp = <410000>;
+ regulator-enable-ramp-delay = <1000>;
+ };
+ };
+ };
+ };
+ i2c@4 {
+ reg = <4>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ssb_rssd31: regulator@3a {
+ compatible = "maxim,max5970";
+ reg = <0x3a>;
+ interrupt-parent = <&smb_svc_pex_rssd17_32>;
+ interrupts = <58 IRQ_TYPE_LEVEL_LOW>;
+
+ vss1-supply = <&p3v3_aux>;
+ vss2-supply = <&p12v>;
+
+ leds {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@0 {
+ reg = <0>;
+ label = "rssd31:green:power";
+ default-state = "off";
+ };
+ };
+
+ regulators {
+ sw0_ssb_rssd31: sw0 {
+ regulator-name = "rssd31_12v";
+ shunt-resistor-micro-ohms = <9000>;
+ regulator-over-current-protection;
+ regulator-oc-protection-microamp = <4500000>;
+ regulator-enable-ramp-delay = <1000>;
+ };
+ sw1_ssb_rssd31: sw1 {
+ regulator-name = "rssd31_3v3";
+ shunt-resistor-micro-ohms = <100000>;
+ regulator-over-current-protection;
+ regulator-oc-protection-microamp = <410000>;
+ regulator-enable-ramp-delay = <1000>;
+ };
+ };
+ };
+ };
+ i2c@5 {
+ reg = <5>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ssb_rssd30: regulator@3a {
+ compatible = "maxim,max5970";
+ reg = <0x3a>;
+ interrupt-parent = <&smb_svc_pex_rssd17_32>;
+ interrupts = <57 IRQ_TYPE_LEVEL_LOW>;
+
+ vss1-supply = <&p3v3_aux>;
+ vss2-supply = <&p12v>;
+
+ leds {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@0 {
+ reg = <0>;
+ label = "rssd30:green:power";
+ default-state = "off";
+ };
+ };
+
+ regulators {
+ sw0_ssb_rssd30: sw0 {
+ regulator-name = "rssd30_12v";
+ shunt-resistor-micro-ohms = <9000>;
+ regulator-over-current-protection;
+ regulator-oc-protection-microamp = <4500000>;
+ regulator-enable-ramp-delay = <1000>;
+ };
+ sw1_ssb_rssd30: sw1 {
+ regulator-name = "rssd30_3v3";
+ shunt-resistor-micro-ohms = <100000>;
+ regulator-over-current-protection;
+ regulator-oc-protection-microamp = <410000>;
+ regulator-enable-ramp-delay = <1000>;
+ };
+ };
+ };
+ };
+ i2c@6 {
+ reg = <6>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ssb_rssd29: regulator@3a {
+ compatible = "maxim,max5970";
+ reg = <0x3a>;
+ interrupt-parent = <&smb_svc_pex_rssd17_32>;
+ interrupts = <56 IRQ_TYPE_LEVEL_LOW>;
+
+ vss1-supply = <&p3v3_aux>;
+ vss2-supply = <&p12v>;
+
+ leds {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@0 {
+ reg = <0>;
+ label = "rssd29:green:power";
+ default-state = "off";
+ };
+ };
+
+ regulators {
+ sw0_ssb_rssd29: sw0 {
+ regulator-name = "rssd29_12v";
+ shunt-resistor-micro-ohms = <9000>;
+ regulator-over-current-protection;
+ regulator-oc-protection-microamp = <4500000>;
+ regulator-enable-ramp-delay = <1000>;
+ };
+ sw1_ssb_rssd29: sw1 {
+ regulator-name = "rssd29_3v3";
+ shunt-resistor-micro-ohms = <100000>;
+ regulator-over-current-protection;
+ regulator-oc-protection-microamp = <410000>;
+ regulator-enable-ramp-delay = <1000>;
+ };
+ };
+ };
+ };
+ i2c@7 {
+ reg = <7>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ssb_rssd28: regulator@3a {
+ compatible = "maxim,max5970";
+ reg = <0x3a>;
+ interrupt-parent = <&smb_svc_pex_rssd17_32>;
+ interrupts = <55 IRQ_TYPE_LEVEL_LOW>;
+
+ vss1-supply = <&p3v3_aux>;
+ vss2-supply = <&p12v>;
+
+ leds {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@0 {
+ reg = <0>;
+ label = "rssd28:green:power";
+ default-state = "off";
+ };
+ };
+
+ regulators {
+ sw0_ssb_rssd28: sw0 {
+ regulator-name = "rssd28_12v";
+ shunt-resistor-micro-ohms = <9000>;
+ regulator-over-current-protection;
+ regulator-oc-protection-microamp = <4500000>;
+ regulator-enable-ramp-delay = <1000>;
+ };
+ sw1_ssb_rssd28: sw1 {
+ regulator-name = "rssd28_3v3";
+ shunt-resistor-micro-ohms = <100000>;
+ regulator-over-current-protection;
+ regulator-oc-protection-microamp = <410000>;
+ regulator-enable-ramp-delay = <1000>;
+ };
+ };
+ };
+ };
+};
+
+&i2cmux18 {
+ i2c@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ssb_rssd03: regulator@3a {
+ compatible = "maxim,max5970";
+ reg = <0x3a>;
+ interrupt-parent = <&smb_svc_pex_rssd01_16>;
+ interrupts = <46 IRQ_TYPE_LEVEL_LOW>;
+
+ vss1-supply = <&p3v3_aux>;
+ vss2-supply = <&p12v>;
+
+ leds {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@0 {
+ reg = <0>;
+ label = "rssd03:green:power";
+ default-state = "off";
+ };
+ };
+
+ regulators {
+ sw0_ssb_rssd03: sw0 {
+ regulator-name = "rssd03_12v";
+ shunt-resistor-micro-ohms = <9000>;
+ regulator-over-current-protection;
+ regulator-oc-protection-microamp = <4500000>;
+ regulator-enable-ramp-delay = <1000>;
+ };
+ sw1_ssb_rssd03: sw1 {
+ regulator-name = "rssd03_3v3";
+ shunt-resistor-micro-ohms = <100000>;
+ regulator-over-current-protection;
+ regulator-oc-protection-microamp = <410000>;
+ regulator-enable-ramp-delay = <1000>;
+ };
+ };
+ };
+ };
+ i2c@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ssb_rssd02: regulator@3a {
+ compatible = "maxim,max5970";
+ reg = <0x3a>;
+ interrupt-parent = <&smb_svc_pex_rssd01_16>;
+ interrupts = <45 IRQ_TYPE_LEVEL_LOW>;
+
+ vss1-supply = <&p3v3_aux>;
+ vss2-supply = <&p12v>;
+
+ leds {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@0 {
+ reg = <0>;
+ label = "rssd02:green:power";
+ default-state = "off";
+ };
+ };
+
+ regulators {
+ sw0_ssb_rssd02: sw0 {
+ regulator-name = "rssd02_12v";
+ shunt-resistor-micro-ohms = <9000>;
+ regulator-over-current-protection;
+ regulator-oc-protection-microamp = <4500000>;
+ regulator-enable-ramp-delay = <1000>;
+ };
+ sw1_ssb_rssd02: sw1 {
+ regulator-name = "rssd02_3v3";
+ shunt-resistor-micro-ohms = <100000>;
+ regulator-over-current-protection;
+ regulator-oc-protection-microamp = <410000>;
+ regulator-enable-ramp-delay = <1000>;
+ };
+ };
+ };
+ };
+ i2c@2 {
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ssb_rssd01: regulator@3a {
+ compatible = "maxim,max5970";
+ reg = <0x3a>;
+ interrupt-parent = <&smb_svc_pex_rssd01_16>;
+ interrupts = <44 IRQ_TYPE_LEVEL_LOW>;
+
+ vss1-supply = <&p3v3_aux>;
+ vss2-supply = <&p12v>;
+
+ leds {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@0 {
+ reg = <0>;
+ label = "rssd01:green:power";
+ default-state = "off";
+ };
+ };
+
+ regulators {
+ sw0_ssb_rssd01: sw0 {
+ regulator-name = "rssd01_12v";
+ shunt-resistor-micro-ohms = <9000>;
+ regulator-over-current-protection;
+ regulator-oc-protection-microamp = <4500000>;
+ regulator-enable-ramp-delay = <1000>;
+ };
+ sw1_ssb_rssd01: sw1 {
+ regulator-name = "rssd01_3v3";
+ shunt-resistor-micro-ohms = <100000>;
+ regulator-over-current-protection;
+ regulator-oc-protection-microamp = <410000>;
+ regulator-enable-ramp-delay = <1000>;
+ };
+ };
+ };
+ };
+ i2c@3 {
+ reg = <3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ssb_rssd04: regulator@3a {
+ compatible = "maxim,max5970";
+ reg = <0x3a>;
+ interrupt-parent = <&smb_svc_pex_rssd01_16>;
+ interrupts = <47 IRQ_TYPE_LEVEL_LOW>;
+
+ vss1-supply = <&p3v3_aux>;
+ vss2-supply = <&p12v>;
+
+ leds {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@0 {
+ reg = <0>;
+ label = "rssd04:green:power";
+ default-state = "off";
+ };
+ };
+
+ regulators {
+ sw0_ssb_rssd04: sw0 {
+ regulator-name = "rssd04_12v";
+ shunt-resistor-micro-ohms = <9000>;
+ regulator-over-current-protection;
+ regulator-oc-protection-microamp = <4500000>;
+ regulator-enable-ramp-delay = <1000>;
+ };
+ sw1_ssb_rssd04: sw1 {
+ regulator-name = "rssd04_3v3";
+ shunt-resistor-micro-ohms = <100000>;
+ regulator-over-current-protection;
+ regulator-oc-protection-microamp = <410000>;
+ regulator-enable-ramp-delay = <1000>;
+ };
+ };
+ };
+ };
+ i2c@4 {
+ reg = <4>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ssb_rssd05: regulator@3a {
+ compatible = "maxim,max5970";
+ reg = <0x3a>;
+ interrupt-parent = <&smb_svc_pex_rssd01_16>;
+ interrupts = <48 IRQ_TYPE_LEVEL_LOW>;
+
+ vss1-supply = <&p3v3_aux>;
+ vss2-supply = <&p12v>;
+
+ leds {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@0 {
+ reg = <0>;
+ label = "rssd05:green:power";
+ default-state = "off";
+ };
+ };
+
+ regulators {
+ sw0_ssb_rssd05: sw0 {
+ regulator-name = "rssd05_12v";
+ shunt-resistor-micro-ohms = <9000>;
+ regulator-over-current-protection;
+ regulator-oc-protection-microamp = <4500000>;
+ regulator-enable-ramp-delay = <1000>;
+ };
+ sw1_ssb_rssd05: sw1 {
+ regulator-name = "rssd05_3v3";
+ shunt-resistor-micro-ohms = <100000>;
+ regulator-over-current-protection;
+ regulator-oc-protection-microamp = <410000>;
+ regulator-enable-ramp-delay = <1000>;
+ };
+ };
+ };
+ };
+ i2c@5 {
+ reg = <5>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ssb_rssd08: regulator@3a {
+ compatible = "maxim,max5970";
+ reg = <0x3a>;
+ interrupt-parent = <&smb_svc_pex_rssd01_16>;
+ interrupts = <51 IRQ_TYPE_LEVEL_LOW>;
+
+ vss1-supply = <&p3v3_aux>;
+ vss2-supply = <&p12v>;
+
+ leds {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@0 {
+ reg = <0>;
+ label = "rssd08:green:power";
+ default-state = "off";
+ };
+ };
+
+ regulators {
+ sw0_ssb_rssd08: sw0 {
+ regulator-name = "rssd08_12v";
+ shunt-resistor-micro-ohms = <9000>;
+ regulator-over-current-protection;
+ regulator-oc-protection-microamp = <4500000>;
+ regulator-enable-ramp-delay = <1000>;
+ };
+ sw1_ssb_rssd08: sw1 {
+ regulator-name = "rssd08_3v3";
+ shunt-resistor-micro-ohms = <100000>;
+ regulator-over-current-protection;
+ regulator-oc-protection-microamp = <410000>;
+ regulator-enable-ramp-delay = <1000>;
+ };
+ };
+ };
+ };
+ i2c@6 {
+ reg = <6>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ssb_rssd07: regulator@3a {
+ compatible = "maxim,max5970";
+ reg = <0x3a>;
+ interrupt-parent = <&smb_svc_pex_rssd01_16>;
+ interrupts = <50 IRQ_TYPE_LEVEL_LOW>;
+
+ vss1-supply = <&p3v3_aux>;
+ vss2-supply = <&p12v>;
+
+ leds {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@0 {
+ reg = <0>;
+ label = "rssd07:green:power";
+ default-state = "off";
+ };
+ };
+
+ regulators {
+ sw0_ssb_rssd07: sw0 {
+ regulator-name = "rssd07_12v";
+ shunt-resistor-micro-ohms = <9000>;
+ regulator-over-current-protection;
+ regulator-oc-protection-microamp = <4500000>;
+ regulator-enable-ramp-delay = <1000>;
+ };
+ sw1_ssb_rssd07: sw1 {
+ regulator-name = "rssd07_3v3";
+ shunt-resistor-micro-ohms = <100000>;
+ regulator-over-current-protection;
+ regulator-oc-protection-microamp = <410000>;
+ regulator-enable-ramp-delay = <1000>;
+ };
+ };
+ };
+ };
+ i2c@7 {
+ reg = <7>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ssb_rssd06: regulator@3a {
+ compatible = "maxim,max5970";
+ reg = <0x3a>;
+ interrupt-parent = <&smb_svc_pex_rssd01_16>;
+ interrupts = <49 IRQ_TYPE_LEVEL_LOW>;
+
+ vss1-supply = <&p3v3_aux>;
+ vss2-supply = <&p12v>;
+
+ leds {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@0 {
+ reg = <0>;
+ label = "rssd06:green:power";
+ default-state = "off";
+ };
+ };
+
+ regulators {
+ sw0_ssb_rssd06: sw0 {
+ regulator-name = "rssd06_12v";
+ shunt-resistor-micro-ohms = <9000>;
+ regulator-over-current-protection;
+ regulator-oc-protection-microamp = <4500000>;
+ regulator-enable-ramp-delay = <1000>;
+ };
+ sw1_ssb_rssd06: sw1 {
+ regulator-name = "rssd06_3v3";
+ shunt-resistor-micro-ohms = <100000>;
+ regulator-over-current-protection;
+ regulator-oc-protection-microamp = <410000>;
+ regulator-enable-ramp-delay = <1000>;
+ };
+ };
+ };
+ };
+};
+
+&i2cmux19 {
+ i2c@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ssb_rssd14: regulator@3a {
+ compatible = "maxim,max5970";
+ reg = <0x3a>;
+ interrupt-parent = <&smb_svc_pex_rssd01_16>;
+ interrupts = <57 IRQ_TYPE_LEVEL_LOW>;
+
+ vss1-supply = <&p3v3_aux>;
+ vss2-supply = <&p12v>;
+
+ leds {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@0 {
+ reg = <0>;
+ label = "rssd14:green:power";
+ default-state = "off";
+ };
+ };
+
+ regulators {
+ sw0_ssb_rssd14: sw0 {
+ regulator-name = "rssd14_12v";
+ shunt-resistor-micro-ohms = <9000>;
+ regulator-over-current-protection;
+ regulator-oc-protection-microamp = <4500000>;
+ regulator-enable-ramp-delay = <1000>;
+ };
+ sw1_ssb_rssd14: sw1 {
+ regulator-name = "rssd14_3v3";
+ shunt-resistor-micro-ohms = <100000>;
+ regulator-over-current-protection;
+ regulator-oc-protection-microamp = <410000>;
+ regulator-enable-ramp-delay = <1000>;
+ };
+ };
+ };
+ };
+ i2c@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ssb_rssd13: regulator@3a {
+ compatible = "maxim,max5970";
+ reg = <0x3a>;
+ interrupt-parent = <&smb_svc_pex_rssd01_16>;
+ interrupts = <56 IRQ_TYPE_LEVEL_LOW>;
+
+ vss1-supply = <&p3v3_aux>;
+ vss2-supply = <&p12v>;
+
+ leds {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@0 {
+ reg = <0>;
+ label = "rssd13:green:power";
+ default-state = "off";
+ };
+ };
+
+ regulators {
+ sw0_ssb_rssd13: sw0 {
+ regulator-name = "rssd13_12v";
+ shunt-resistor-micro-ohms = <9000>;
+ regulator-over-current-protection;
+ regulator-oc-protection-microamp = <4500000>;
+ regulator-enable-ramp-delay = <1000>;
+ };
+ sw1_ssb_rssd13: sw1 {
+ regulator-name = "rssd13_3v3";
+ shunt-resistor-micro-ohms = <100000>;
+ regulator-over-current-protection;
+ regulator-oc-protection-microamp = <410000>;
+ regulator-enable-ramp-delay = <1000>;
+ };
+ };
+ };
+ };
+ i2c@2 {
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ssb_rssd12: regulator@3a {
+ compatible = "maxim,max5970";
+ reg = <0x3a>;
+ interrupt-parent = <&smb_svc_pex_rssd01_16>;
+ interrupts = <55 IRQ_TYPE_LEVEL_LOW>;
+
+ vss1-supply = <&p3v3_aux>;
+ vss2-supply = <&p12v>;
+
+ leds {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@0 {
+ reg = <0>;
+ label = "rssd12:green:power";
+ default-state = "off";
+ };
+ };
+
+ regulators {
+ sw0_ssb_rssd12: sw0 {
+ regulator-name = "rssd12_12v";
+ shunt-resistor-micro-ohms = <9000>;
+ regulator-over-current-protection;
+ regulator-oc-protection-microamp = <4500000>;
+ regulator-enable-ramp-delay = <1000>;
+ };
+ sw1_ssb_rssd12: sw1 {
+ regulator-name = "rssd12_3v3";
+ shunt-resistor-micro-ohms = <100000>;
+ regulator-over-current-protection;
+ regulator-oc-protection-microamp = <410000>;
+ regulator-enable-ramp-delay = <1000>;
+ };
+ };
+ };
+ };
+ i2c@3 {
+ reg = <3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ssb_rssd11: regulator@3a {
+ compatible = "maxim,max5970";
+ reg = <0x3a>;
+ interrupt-parent = <&smb_svc_pex_rssd01_16>;
+ interrupts = <54 IRQ_TYPE_LEVEL_LOW>;
+
+ vss1-supply = <&p3v3_aux>;
+ vss2-supply = <&p12v>;
+
+ leds {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@0 {
+ reg = <0>;
+ label = "rssd11:green:power";
+ default-state = "off";
+ };
+ };
+
+ regulators {
+ sw0_ssb_rssd11: sw0 {
+ regulator-name = "rssd11_12v";
+ shunt-resistor-micro-ohms = <9000>;
+ regulator-over-current-protection;
+ regulator-oc-protection-microamp = <4500000>;
+ regulator-enable-ramp-delay = <1000>;
+ };
+ sw1_ssb_rssd11: sw1 {
+ regulator-name = "rssd11_3v3";
+ shunt-resistor-micro-ohms = <100000>;
+ regulator-over-current-protection;
+ regulator-oc-protection-microamp = <410000>;
+ regulator-enable-ramp-delay = <1000>;
+ };
+ };
+ };
+ };
+ i2c@4 {
+ reg = <4>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ssb_rssd10: regulator@3a {
+ compatible = "maxim,max5970";
+ reg = <0x3a>;
+ interrupt-parent = <&smb_svc_pex_rssd01_16>;
+ interrupts = <53 IRQ_TYPE_LEVEL_LOW>;
+
+ vss1-supply = <&p3v3_aux>;
+ vss2-supply = <&p12v>;
+
+ leds {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@0 {
+ reg = <0>;
+ label = "rssd10:green:power";
+ default-state = "off";
+ };
+ };
+
+ regulators {
+ sw0_ssb_rssd10: sw0 {
+ regulator-name = "rssd10_12v";
+ shunt-resistor-micro-ohms = <9000>;
+ regulator-over-current-protection;
+ regulator-oc-protection-microamp = <4500000>;
+ regulator-enable-ramp-delay = <1000>;
+ };
+ sw1_ssb_rssd10: sw1 {
+ regulator-name = "rssd10_3v3";
+ shunt-resistor-micro-ohms = <100000>;
+ regulator-over-current-protection;
+ regulator-oc-protection-microamp = <410000>;
+ regulator-enable-ramp-delay = <1000>;
+ };
+ };
+ };
+ };
+ i2c@5 {
+ reg = <5>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ssb_rssd09: regulator@3a {
+ compatible = "maxim,max5970";
+ reg = <0x3a>;
+ interrupt-parent = <&smb_svc_pex_rssd01_16>;
+ interrupts = <52 IRQ_TYPE_LEVEL_LOW>;
+
+ vss1-supply = <&p3v3_aux>;
+ vss2-supply = <&p12v>;
+
+ leds {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@0 {
+ reg = <0>;
+ label = "rssd09:green:power";
+ default-state = "off";
+ };
+ };
+
+ regulators {
+ sw0_ssb_rssd09: sw0 {
+ regulator-name = "rssd09_12v";
+ shunt-resistor-micro-ohms = <9000>;
+ regulator-over-current-protection;
+ regulator-oc-protection-microamp = <4500000>;
+ regulator-enable-ramp-delay = <1000>;
+ };
+ sw1_ssb_rssd09: sw1 {
+ regulator-name = "rssd09_3v3";
+ shunt-resistor-micro-ohms = <100000>;
+ regulator-over-current-protection;
+ regulator-oc-protection-microamp = <410000>;
+ regulator-enable-ramp-delay = <1000>;
+ };
+ };
+ };
+ };
+ i2c@6 {
+ reg = <6>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ssb_rssd15: regulator@3a {
+ compatible = "maxim,max5970";
+ reg = <0x3a>;
+ interrupt-parent = <&smb_svc_pex_rssd01_16>;
+ interrupts = <58 IRQ_TYPE_LEVEL_LOW>;
+
+ vss1-supply = <&p3v3_aux>;
+ vss2-supply = <&p12v>;
+
+ leds {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@0 {
+ reg = <0>;
+ label = "rssd15:green:power";
+ default-state = "off";
+ };
+ };
+
+ regulators {
+ sw0_ssb_rssd15: sw0 {
+ regulator-name = "rssd15_12v";
+ shunt-resistor-micro-ohms = <9000>;
+ regulator-over-current-protection;
+ regulator-oc-protection-microamp = <4500000>;
+ regulator-enable-ramp-delay = <1000>;
+ };
+ sw1_ssb_rssd15: sw1 {
+ regulator-name = "rssd15_3v3";
+ shunt-resistor-micro-ohms = <100000>;
+ regulator-over-current-protection;
+ regulator-oc-protection-microamp = <410000>;
+ regulator-enable-ramp-delay = <1000>;
+ };
+ };
+ };
+ };
+ i2c@7 {
+ reg = <7>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ssb_rssd16: regulator@3a {
+ compatible = "maxim,max5970";
+ reg = <0x3a>;
+ interrupt-parent = <&smb_svc_pex_rssd01_16>;
+ interrupts = <59 IRQ_TYPE_LEVEL_LOW>;
+
+ vss1-supply = <&p3v3_aux>;
+ vss2-supply = <&p12v>;
+
+ leds {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@0 {
+ reg = <0>;
+ label = "rssd16:green:power";
+ default-state = "off";
+ };
+ };
+
+ regulators {
+ sw0_ssb_rssd16: sw0 {
+ regulator-name = "rssd16_12v";
+ shunt-resistor-micro-ohms = <9000>;
+ regulator-over-current-protection;
+ regulator-oc-protection-microamp = <4500000>;
+ regulator-enable-ramp-delay = <1000>;
+ };
+ sw1_ssb_rssd16: sw1 {
+ regulator-name = "rssd16_3v3";
+ shunt-resistor-micro-ohms = <100000>;
+ regulator-over-current-protection;
+ regulator-oc-protection-microamp = <410000>;
+ regulator-enable-ramp-delay = <1000>;
+ };
+ };
+ };
+ };
+};
--
2.42.0
^ permalink raw reply related [flat|nested] 13+ messages in thread
* Re: [PATCH v6 1/2] dt-bindings: arm: aspeed: add IBM SBP1 board
2024-11-04 9:22 [PATCH v6 1/2] dt-bindings: arm: aspeed: add IBM SBP1 board Naresh Solanki
2024-11-04 9:22 ` [PATCH v6 2/2] ARM: dts: aspeed: sbp1: IBM sbp1 BMC board Naresh Solanki
@ 2024-11-04 14:39 ` Rob Herring (Arm)
2024-11-04 18:49 ` Conor Dooley
2024-11-06 0:37 ` Andrew Jeffery
2 siblings, 1 reply; 13+ messages in thread
From: Rob Herring (Arm) @ 2024-11-04 14:39 UTC (permalink / raw)
To: Naresh Solanki
Cc: jdelvare, Andrew Jeffery, Conor Dooley, linux-aspeed,
linux-kernel, devicetree, krzk+dt, sylv, linux-arm-kernel,
linux-hwmon, linux, Joel Stanley, conor+dt
On Mon, 04 Nov 2024 14:52:14 +0530, Naresh Solanki wrote:
> Document the new compatibles used on IBM SBP1.
>
> Signed-off-by: Naresh Solanki <naresh.solanki@9elements.com>
> Acked-by: Conor Dooley <conor.dooley@microchip.com>
> ---
> Changes in V4:
> - Retain Acked-by from v2.
> - Fix alphabetic order
> ---
> Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml | 1 +
> 1 file changed, 1 insertion(+)
>
My bot found new DTB warnings on the .dts files added or changed in this
series.
Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings
are fixed by another series. Ultimately, it is up to the platform
maintainer whether these warnings are acceptable or not. No need to reply
unless the platform maintainer has comments.
If you already ran DT checks and didn't see these error(s), then
make sure dt-schema is up to date:
pip3 install dtschema --upgrade
New warnings running 'make CHECK_DTBS=y aspeed/aspeed-bmc-ibm-sbp1.dtb' for 20241104092220.2268805-1-naresh.solanki@9elements.com:
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: timer: 'clocks' does not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/timer/arm,arch_timer.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: /sdram@1e6e0000: failed to match any schema with compatible: ['aspeed,ast2600-sdram-edac', 'syscon']
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: bus@1e600000: compatible: ['aspeed,ast2600-ahbc', 'syscon'] is too long
from schema $id: http://devicetree.org/schemas/bus/aspeed,ast2600-ahbc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: syscon@1e6e2000: 'smp-memram@180' does not match any of the regexes: '^interrupt-controller@[0-9a-f]+$', '^p2a-control@[0-9a-f]+$', '^pinctrl(@[0-9a-f]+)?$', '^silicon-id@[0-9a-f]+$', 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/mfd/aspeed,ast2x00-scu.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: /ahb/apb@1e6e0000/syscon@1e6e2000/smp-memram@180: failed to match any schema with compatible: ['aspeed,ast2600-smpmem']
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: /ahb/apb@1e6e0000/syscon@1e6e2000/interrupt-controller@560: failed to match any schema with compatible: ['aspeed,ast2600-scu-ic0']
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: /ahb/apb@1e6e0000/syscon@1e6e2000/interrupt-controller@570: failed to match any schema with compatible: ['aspeed,ast2600-scu-ic1']
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: /ahb/apb@1e6e0000/display@1e6e6000: failed to match any schema with compatible: ['aspeed,ast2600-gfx', 'syscon']
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: adc@1e6e9000: 'interrupts' does not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/iio/adc/aspeed,ast2600-adc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: adc@1e6e9100: 'interrupts' does not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/iio/adc/aspeed,ast2600-adc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: crypto@1e6fa000: 'aspeed,ahbc' does not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/crypto/aspeed,ast2600-acry.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: /ahb/video@1e700000: failed to match any schema with compatible: ['aspeed,ast2600-video-engine']
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: sdc@1e740000: sdhci@1e740100:compatible: ['aspeed,ast2600-sdhci', 'sdhci'] is too long
from schema $id: http://devicetree.org/schemas/mmc/aspeed,sdhci.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: sdc@1e740000: sdhci@1e740200:compatible: ['aspeed,ast2600-sdhci', 'sdhci'] is too long
from schema $id: http://devicetree.org/schemas/mmc/aspeed,sdhci.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: /ahb/sdc@1e740000/sdhci@1e740100: failed to match any schema with compatible: ['aspeed,ast2600-sdhci', 'sdhci']
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: /ahb/sdc@1e740000/sdhci@1e740200: failed to match any schema with compatible: ['aspeed,ast2600-sdhci', 'sdhci']
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: /ahb/apb@1e780000/timer@1e782000: failed to match any schema with compatible: ['aspeed,ast2600-timer']
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: lpc@1e789000: lpc-snoop@80: 'clocks' does not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/mfd/aspeed-lpc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: lpc@1e789000: reg-io-width: 4 is not of type 'object'
from schema $id: http://devicetree.org/schemas/mfd/aspeed-lpc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: kcs@24: 'clocks' does not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/ipmi/aspeed,ast2400-kcs-bmc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: kcs@28: 'clocks' does not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/ipmi/aspeed,ast2400-kcs-bmc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: kcs@2c: 'clocks' does not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/ipmi/aspeed,ast2400-kcs-bmc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: kcs@114: 'clocks' does not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/ipmi/aspeed,ast2400-kcs-bmc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: /ahb/apb@1e780000/lpc@1e789000/lhc@a0: failed to match any schema with compatible: ['aspeed,ast2600-lhc']
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: /ahb/apb@1e780000/lpc@1e789000/ibt@140: failed to match any schema with compatible: ['aspeed,ast2600-ibt-bmc']
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: /ahb/apb@1e780000/bus@1e78a000/i2c@280/bmc-slave@10: failed to match any schema with compatible: ['ipmb-dev']
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: fsi@1e79b000: compatible: ['aspeed,ast2600-fsi-master', 'fsi-master'] is too long
from schema $id: http://devicetree.org/schemas/fsi/aspeed,ast2600-fsi-master.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: /ahb/apb@1e790000/fsi@1e79b000: failed to match any schema with compatible: ['aspeed,ast2600-fsi-master', 'fsi-master']
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: fsi@1e79b100: compatible: ['aspeed,ast2600-fsi-master', 'fsi-master'] is too long
from schema $id: http://devicetree.org/schemas/fsi/aspeed,ast2600-fsi-master.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: /ahb/apb@1e790000/fsi@1e79b100: failed to match any schema with compatible: ['aspeed,ast2600-fsi-master', 'fsi-master']
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: /ahb/apb@1e790000/dma-controller@1e79e000: failed to match any schema with compatible: ['aspeed,ast2600-udma']
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH v6 1/2] dt-bindings: arm: aspeed: add IBM SBP1 board
2024-11-04 14:39 ` [PATCH v6 1/2] dt-bindings: arm: aspeed: add IBM SBP1 board Rob Herring (Arm)
@ 2024-11-04 18:49 ` Conor Dooley
2024-11-05 0:09 ` Andrew Jeffery
0 siblings, 1 reply; 13+ messages in thread
From: Conor Dooley @ 2024-11-04 18:49 UTC (permalink / raw)
To: Rob Herring (Arm)
Cc: Naresh Solanki, jdelvare, Andrew Jeffery, Conor Dooley,
linux-aspeed, linux-kernel, devicetree, krzk+dt, sylv,
linux-arm-kernel, linux-hwmon, linux, Joel Stanley, conor+dt
[-- Attachment #1: Type: text/plain, Size: 7229 bytes --]
On Mon, Nov 04, 2024 at 08:39:21AM -0600, Rob Herring (Arm) wrote:
>
> On Mon, 04 Nov 2024 14:52:14 +0530, Naresh Solanki wrote:
> > Document the new compatibles used on IBM SBP1.
> >
> > Signed-off-by: Naresh Solanki <naresh.solanki@9elements.com>
> > Acked-by: Conor Dooley <conor.dooley@microchip.com>
> > ---
> > Changes in V4:
> > - Retain Acked-by from v2.
> > - Fix alphabetic order
> > ---
> > Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml | 1 +
> > 1 file changed, 1 insertion(+)
> >
>
>
> My bot found new DTB warnings on the .dts files added or changed in this
> series.
>
> Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings
> are fixed by another series. Ultimately, it is up to the platform
> maintainer whether these warnings are acceptable or not. No need to reply
> unless the platform maintainer has comments.
>
> If you already ran DT checks and didn't see these error(s), then
> make sure dt-schema is up to date:
>
> pip3 install dtschema --upgrade
>
>
> New warnings running 'make CHECK_DTBS=y aspeed/aspeed-bmc-ibm-sbp1.dtb' for 20241104092220.2268805-1-naresh.solanki@9elements.com:
Really? This many warnings on a v6?
>
> arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: timer: 'clocks' does not match any of the regexes: 'pinctrl-[0-9]+'
> from schema $id: http://devicetree.org/schemas/timer/arm,arch_timer.yaml#
> arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: /sdram@1e6e0000: failed to match any schema with compatible: ['aspeed,ast2600-sdram-edac', 'syscon']
> arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: bus@1e600000: compatible: ['aspeed,ast2600-ahbc', 'syscon'] is too long
> from schema $id: http://devicetree.org/schemas/bus/aspeed,ast2600-ahbc.yaml#
> arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: syscon@1e6e2000: 'smp-memram@180' does not match any of the regexes: '^interrupt-controller@[0-9a-f]+$', '^p2a-control@[0-9a-f]+$', '^pinctrl(@[0-9a-f]+)?$', '^silicon-id@[0-9a-f]+$', 'pinctrl-[0-9]+'
> from schema $id: http://devicetree.org/schemas/mfd/aspeed,ast2x00-scu.yaml#
> arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: /ahb/apb@1e6e0000/syscon@1e6e2000/smp-memram@180: failed to match any schema with compatible: ['aspeed,ast2600-smpmem']
> arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: /ahb/apb@1e6e0000/syscon@1e6e2000/interrupt-controller@560: failed to match any schema with compatible: ['aspeed,ast2600-scu-ic0']
> arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: /ahb/apb@1e6e0000/syscon@1e6e2000/interrupt-controller@570: failed to match any schema with compatible: ['aspeed,ast2600-scu-ic1']
> arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: /ahb/apb@1e6e0000/display@1e6e6000: failed to match any schema with compatible: ['aspeed,ast2600-gfx', 'syscon']
> arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: adc@1e6e9000: 'interrupts' does not match any of the regexes: 'pinctrl-[0-9]+'
> from schema $id: http://devicetree.org/schemas/iio/adc/aspeed,ast2600-adc.yaml#
> arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: adc@1e6e9100: 'interrupts' does not match any of the regexes: 'pinctrl-[0-9]+'
> from schema $id: http://devicetree.org/schemas/iio/adc/aspeed,ast2600-adc.yaml#
> arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: crypto@1e6fa000: 'aspeed,ahbc' does not match any of the regexes: 'pinctrl-[0-9]+'
> from schema $id: http://devicetree.org/schemas/crypto/aspeed,ast2600-acry.yaml#
> arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: /ahb/video@1e700000: failed to match any schema with compatible: ['aspeed,ast2600-video-engine']
> arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: sdc@1e740000: sdhci@1e740100:compatible: ['aspeed,ast2600-sdhci', 'sdhci'] is too long
> from schema $id: http://devicetree.org/schemas/mmc/aspeed,sdhci.yaml#
> arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: sdc@1e740000: sdhci@1e740200:compatible: ['aspeed,ast2600-sdhci', 'sdhci'] is too long
> from schema $id: http://devicetree.org/schemas/mmc/aspeed,sdhci.yaml#
> arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: /ahb/sdc@1e740000/sdhci@1e740100: failed to match any schema with compatible: ['aspeed,ast2600-sdhci', 'sdhci']
> arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: /ahb/sdc@1e740000/sdhci@1e740200: failed to match any schema with compatible: ['aspeed,ast2600-sdhci', 'sdhci']
> arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: /ahb/apb@1e780000/timer@1e782000: failed to match any schema with compatible: ['aspeed,ast2600-timer']
> arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: lpc@1e789000: lpc-snoop@80: 'clocks' does not match any of the regexes: 'pinctrl-[0-9]+'
> from schema $id: http://devicetree.org/schemas/mfd/aspeed-lpc.yaml#
> arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: lpc@1e789000: reg-io-width: 4 is not of type 'object'
> from schema $id: http://devicetree.org/schemas/mfd/aspeed-lpc.yaml#
> arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: kcs@24: 'clocks' does not match any of the regexes: 'pinctrl-[0-9]+'
> from schema $id: http://devicetree.org/schemas/ipmi/aspeed,ast2400-kcs-bmc.yaml#
> arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: kcs@28: 'clocks' does not match any of the regexes: 'pinctrl-[0-9]+'
> from schema $id: http://devicetree.org/schemas/ipmi/aspeed,ast2400-kcs-bmc.yaml#
> arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: kcs@2c: 'clocks' does not match any of the regexes: 'pinctrl-[0-9]+'
> from schema $id: http://devicetree.org/schemas/ipmi/aspeed,ast2400-kcs-bmc.yaml#
> arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: kcs@114: 'clocks' does not match any of the regexes: 'pinctrl-[0-9]+'
> from schema $id: http://devicetree.org/schemas/ipmi/aspeed,ast2400-kcs-bmc.yaml#
> arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: /ahb/apb@1e780000/lpc@1e789000/lhc@a0: failed to match any schema with compatible: ['aspeed,ast2600-lhc']
> arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: /ahb/apb@1e780000/lpc@1e789000/ibt@140: failed to match any schema with compatible: ['aspeed,ast2600-ibt-bmc']
> arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: /ahb/apb@1e780000/bus@1e78a000/i2c@280/bmc-slave@10: failed to match any schema with compatible: ['ipmb-dev']
> arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: fsi@1e79b000: compatible: ['aspeed,ast2600-fsi-master', 'fsi-master'] is too long
> from schema $id: http://devicetree.org/schemas/fsi/aspeed,ast2600-fsi-master.yaml#
> arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: /ahb/apb@1e790000/fsi@1e79b000: failed to match any schema with compatible: ['aspeed,ast2600-fsi-master', 'fsi-master']
> arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: fsi@1e79b100: compatible: ['aspeed,ast2600-fsi-master', 'fsi-master'] is too long
> from schema $id: http://devicetree.org/schemas/fsi/aspeed,ast2600-fsi-master.yaml#
> arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: /ahb/apb@1e790000/fsi@1e79b100: failed to match any schema with compatible: ['aspeed,ast2600-fsi-master', 'fsi-master']
> arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: /ahb/apb@1e790000/dma-controller@1e79e000: failed to match any schema with compatible: ['aspeed,ast2600-udma']
>
>
>
>
>
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH v6 1/2] dt-bindings: arm: aspeed: add IBM SBP1 board
2024-11-04 18:49 ` Conor Dooley
@ 2024-11-05 0:09 ` Andrew Jeffery
2024-11-05 18:53 ` Conor Dooley
0 siblings, 1 reply; 13+ messages in thread
From: Andrew Jeffery @ 2024-11-05 0:09 UTC (permalink / raw)
To: Conor Dooley, Rob Herring (Arm)
Cc: Naresh Solanki, jdelvare, Conor Dooley, linux-aspeed,
linux-kernel, devicetree, krzk+dt, sylv, linux-arm-kernel,
linux-hwmon, linux, Joel Stanley, conor+dt
Hi Conor,
On Mon, 2024-11-04 at 18:49 +0000, Conor Dooley wrote:
> On Mon, Nov 04, 2024 at 08:39:21AM -0600, Rob Herring (Arm) wrote:
> >
> > On Mon, 04 Nov 2024 14:52:14 +0530, Naresh Solanki wrote:
> > > Document the new compatibles used on IBM SBP1.
> > >
> > > Signed-off-by: Naresh Solanki <naresh.solanki@9elements.com>
> > > Acked-by: Conor Dooley <conor.dooley@microchip.com>
> > > ---
> > > Changes in V4:
> > > - Retain Acked-by from v2.
> > > - Fix alphabetic order
> > > ---
> > > Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml | 1 +
> > > 1 file changed, 1 insertion(+)
> > >
> >
> >
> > My bot found new DTB warnings on the .dts files added or changed in
> > this
> > series.
> >
> > Some warnings may be from an existing SoC .dtsi. Or perhaps the
> > warnings
> > are fixed by another series. Ultimately, it is up to the platform
> > maintainer whether these warnings are acceptable or not. No need to
> > reply
> > unless the platform maintainer has comments.
> >
> > If you already ran DT checks and didn't see these error(s), then
> > make sure dt-schema is up to date:
> >
> > pip3 install dtschema --upgrade
> >
> >
> > New warnings running 'make CHECK_DTBS=y aspeed/aspeed-bmc-ibm-
> > sbp1.dtb' for
> > 20241104092220.2268805-1-naresh.solanki@9elements.com:
>
> Really? This many warnings on a v6?
>
I understand that it's surprising and disappointing, however these
warnings are from the Aspeed DTSIs and not directly from the proposed
DTS. Many are an artefact of history, and I'm (slowly) working to clean
them up. Recently I haven't had any time to dedicate to that effort,
and as I'm somewhat responsible for the state of things, I'm not
prepared to block other people's patches and push my own
responsibilities onto them.
I've been replying to those proposing new Aspeed-based devicetrees to
separate the warnings they're introducing from the warnings that
already exist, and requiring them to fix the issues they're responsible
for. I hope that I'll have time to continue to improve the situation,
as this is obviously a tedious task for me too.
Andrew
> >
> > arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: timer: 'clocks'
> > does not match any of the regexes: 'pinctrl-[0-9]+'
> > from schema $id:
> > http://devicetree.org/schemas/timer/arm,arch_timer.yaml#
> > arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: /sdram@1e6e0000:
> > failed to match any schema with compatible: ['aspeed,ast2600-sdram-
> > edac', 'syscon']
> > arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: bus@1e600000:
> > compatible: ['aspeed,ast2600-ahbc', 'syscon'] is too long
> > from schema $id:
> > http://devicetree.org/schemas/bus/aspeed,ast2600-ahbc.yaml#
> > arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: syscon@1e6e2000:
> > 'smp-memram@180' does not match any of the regexes: '^interrupt-
> > controller@[0-9a-f]+$', '^p2a-control@[0-9a-f]+$', '^pinctrl(@[0-
> > 9a-f]+)?$', '^silicon-id@[0-9a-f]+$', 'pinctrl-[0-9]+'
> > from schema $id:
> > http://devicetree.org/schemas/mfd/aspeed,ast2x00-scu.yaml#
> > arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb:
> > /ahb/apb@1e6e0000/syscon@1e6e2000/smp-memram@180: failed to match
> > any schema with compatible: ['aspeed,ast2600-smpmem']
> > arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb:
> > /ahb/apb@1e6e0000/syscon@1e6e2000/interrupt-controller@560: failed
> > to match any schema with compatible: ['aspeed,ast2600-scu-ic0']
> > arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb:
> > /ahb/apb@1e6e0000/syscon@1e6e2000/interrupt-controller@570: failed
> > to match any schema with compatible: ['aspeed,ast2600-scu-ic1']
> > arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb:
> > /ahb/apb@1e6e0000/display@1e6e6000: failed to match any schema with
> > compatible: ['aspeed,ast2600-gfx', 'syscon']
> > arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: adc@1e6e9000:
> > 'interrupts' does not match any of the regexes: 'pinctrl-[0-9]+'
> > from schema $id:
> > http://devicetree.org/schemas/iio/adc/aspeed,ast2600-adc.yaml#
> > arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: adc@1e6e9100:
> > 'interrupts' does not match any of the regexes: 'pinctrl-[0-9]+'
> > from schema $id:
> > http://devicetree.org/schemas/iio/adc/aspeed,ast2600-adc.yaml#
> > arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: crypto@1e6fa000:
> > 'aspeed,ahbc' does not match any of the regexes: 'pinctrl-[0-9]+'
> > from schema $id:
> > http://devicetree.org/schemas/crypto/aspeed,ast2600-acry.yaml#
> > arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb:
> > /ahb/video@1e700000: failed to match any schema with compatible:
> > ['aspeed,ast2600-video-engine']
> > arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: sdc@1e740000:
> > sdhci@1e740100:compatible: ['aspeed,ast2600-sdhci', 'sdhci'] is too
> > long
> > from schema $id:
> > http://devicetree.org/schemas/mmc/aspeed,sdhci.yaml#
> > arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: sdc@1e740000:
> > sdhci@1e740200:compatible: ['aspeed,ast2600-sdhci', 'sdhci'] is too
> > long
> > from schema $id:
> > http://devicetree.org/schemas/mmc/aspeed,sdhci.yaml#
> > arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb:
> > /ahb/sdc@1e740000/sdhci@1e740100: failed to match any schema with
> > compatible: ['aspeed,ast2600-sdhci', 'sdhci']
> > arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb:
> > /ahb/sdc@1e740000/sdhci@1e740200: failed to match any schema with
> > compatible: ['aspeed,ast2600-sdhci', 'sdhci']
> > arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb:
> > /ahb/apb@1e780000/timer@1e782000: failed to match any schema with
> > compatible: ['aspeed,ast2600-timer']
> > arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: lpc@1e789000:
> > lpc-snoop@80: 'clocks' does not match any of the regexes: 'pinctrl-
> > [0-9]+'
> > from schema $id:
> > http://devicetree.org/schemas/mfd/aspeed-lpc.yaml#
> > arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: lpc@1e789000:
> > reg-io-width: 4 is not of type 'object'
> > from schema $id:
> > http://devicetree.org/schemas/mfd/aspeed-lpc.yaml#
> > arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: kcs@24: 'clocks'
> > does not match any of the regexes: 'pinctrl-[0-9]+'
> > from schema $id:
> > http://devicetree.org/schemas/ipmi/aspeed,ast2400-kcs-bmc.yaml#
> > arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: kcs@28: 'clocks'
> > does not match any of the regexes: 'pinctrl-[0-9]+'
> > from schema $id:
> > http://devicetree.org/schemas/ipmi/aspeed,ast2400-kcs-bmc.yaml#
> > arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: kcs@2c: 'clocks'
> > does not match any of the regexes: 'pinctrl-[0-9]+'
> > from schema $id:
> > http://devicetree.org/schemas/ipmi/aspeed,ast2400-kcs-bmc.yaml#
> > arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: kcs@114: 'clocks'
> > does not match any of the regexes: 'pinctrl-[0-9]+'
> > from schema $id:
> > http://devicetree.org/schemas/ipmi/aspeed,ast2400-kcs-bmc.yaml#
> > arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb:
> > /ahb/apb@1e780000/lpc@1e789000/lhc@a0: failed to match any schema
> > with compatible: ['aspeed,ast2600-lhc']
> > arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb:
> > /ahb/apb@1e780000/lpc@1e789000/ibt@140: failed to match any schema
> > with compatible: ['aspeed,ast2600-ibt-bmc']
> > arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb:
> > /ahb/apb@1e780000/bus@1e78a000/i2c@280/bmc-slave@10: failed to
> > match any schema with compatible: ['ipmb-dev']
> > arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: fsi@1e79b000:
> > compatible: ['aspeed,ast2600-fsi-master', 'fsi-master'] is too long
> > from schema $id:
> > http://devicetree.org/schemas/fsi/aspeed,ast2600-fsi-master.yaml#
> > arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb:
> > /ahb/apb@1e790000/fsi@1e79b000: failed to match any schema with
> > compatible: ['aspeed,ast2600-fsi-master', 'fsi-master']
> > arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: fsi@1e79b100:
> > compatible: ['aspeed,ast2600-fsi-master', 'fsi-master'] is too long
> > from schema $id:
> > http://devicetree.org/schemas/fsi/aspeed,ast2600-fsi-master.yaml#
> > arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb:
> > /ahb/apb@1e790000/fsi@1e79b100: failed to match any schema with
> > compatible: ['aspeed,ast2600-fsi-master', 'fsi-master']
> > arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb:
> > /ahb/apb@1e790000/dma-controller@1e79e000: failed to match any
> > schema with compatible: ['aspeed,ast2600-udma']
> >
> >
> >
> >
> >
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH v6 2/2] ARM: dts: aspeed: sbp1: IBM sbp1 BMC board
2024-11-04 9:22 ` [PATCH v6 2/2] ARM: dts: aspeed: sbp1: IBM sbp1 BMC board Naresh Solanki
@ 2024-11-05 0:33 ` Andrew Jeffery
2024-11-05 4:10 ` Naresh Solanki
0 siblings, 1 reply; 13+ messages in thread
From: Andrew Jeffery @ 2024-11-05 0:33 UTC (permalink / raw)
To: Naresh Solanki, robh, krzk+dt, conor+dt, devicetree, linux-kernel,
jdelvare, linux, sylv, linux-hwmon, Joel Stanley
Cc: Patrick Rudolph, linux-arm-kernel, linux-aspeed
On Mon, 2024-11-04 at 14:52 +0530, Naresh Solanki wrote:
> From: Patrick Rudolph <patrick.rudolph@9elements.com>
>
> Add a device tree for IBM sbp1 BMC board which is based on AST2600
> SOC.
>
> sbp1 baseboard has:
> - support for up to four Sapphire Rapids sockets having 16 DIMMS
> each.
> - 240 core/480 threads at maximum
> - 32x CPU PCIe slots
> - 2x M.2 PCH PCIe slots
> - Dual 200Gbit/s NIC
> - SPI TPM
>
> Added the following:
> - Indication LEDs
> - I2C mux & GPIO controller, pin assignments,
> - Thermister,
> - Voltage regulator
> - EEPROM/VPD
>
> Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
> Signed-off-by: Naresh Solanki <Naresh.Solanki@9elements.com>
>
> ---
> Changes in V6:
> - Verified all regulators warning resolved.
How did you verify this? Testing the patches locally, I see:
+/home/andrew/src/kernel.org/linux/origin/build.aspeed_g5/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: pvccinfaon-pvccfa-cpu2@58: 'regulators' does not match any of the regexes: 'pinctrl-[0-9]+'
+ from schema $id: http://devicetree.org/schemas/trivial-devices.yaml#
+/home/andrew/src/kernel.org/linux/origin/build.aspeed_g5/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: mp2973-pvccin-pvccfa-cpu2@58: 'regulators' does not match any of the regexes: 'pinctrl-[0-9]+'
+ from schema $id: http://devicetree.org/schemas/trivial-devices.yaml#
+/home/andrew/src/kernel.org/linux/origin/build.aspeed_g5/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: pvccinfaon-pvccfa-cpu1@58: 'regulators' does not match any of the regexes: 'pinctrl-[0-9]+'
+ from schema $id: http://devicetree.org/schemas/trivial-devices.yaml#
+/home/andrew/src/kernel.org/linux/origin/build.aspeed_g5/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: mp2973-pvccin-pvccfa-cpu1@58: 'regulators' does not match any of the regexes: 'pinctrl-[0-9]+'
+ from schema $id: http://devicetree.org/schemas/trivial-devices.yaml#
+/home/andrew/src/kernel.org/linux/origin/build.aspeed_g5/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: pvccinfaon-pvccfa-cpu3@58: 'regulators' does not match any of the regexes: 'pinctrl-[0-9]+'
+ from schema $id: http://devicetree.org/schemas/trivial-devices.yaml#
+/home/andrew/src/kernel.org/linux/origin/build.aspeed_g5/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: mp2973-pvccin-pvccfa-cpu3@58: 'regulators' does not match any of the regexes: 'pinctrl-[0-9]+'
+ from schema $id: http://devicetree.org/schemas/trivial-devices.yaml#
+/home/andrew/src/kernel.org/linux/origin/build.aspeed_g5/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: regulator@5f: 'regulators' does not match any of the regexes: 'pinctrl-[0-9]+'
+ from schema $id: http://devicetree.org/schemas/trivial-devices.yaml#
+/home/andrew/src/kernel.org/linux/origin/build.aspeed_g5/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: regulator@5f: 'regulators' does not match any of the regexes: 'pinctrl-[0-9]+'
+ from schema $id: http://devicetree.org/schemas/trivial-devices.yaml#
+/home/andrew/src/kernel.org/linux/origin/build.aspeed_g5/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: regulator@5f: 'regulators' does not match any of the regexes: 'pinctrl-[0-9]+'
+ from schema $id: http://devicetree.org/schemas/trivial-devices.yaml#
+/home/andrew/src/kernel.org/linux/origin/build.aspeed_g5/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: regulator@5f: 'regulators' does not match any of the regexes: 'pinctrl-[0-9]+'
+ from schema $id: http://devicetree.org/schemas/trivial-devices.yaml#
+/home/andrew/src/kernel.org/linux/origin/build.aspeed_g5/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: pvccinfaon-pvccfa-cpu0@58: 'regulators' does not match any of the regexes: 'pinctrl-[0-9]+'
+ from schema $id: http://devicetree.org/schemas/trivial-devices.yaml#
+/home/andrew/src/kernel.org/linux/origin/build.aspeed_g5/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: mp2973-pvccin-pvccfa-cpu0@58: 'regulators' does not match any of the regexes: 'pinctrl-[0-9]+'
+ from schema $id: http://devicetree.org/schemas/trivial-devices.yaml#
From a spot check, the warnings seem legitimate. Did you send the right
patches?
Andrew
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH v6 2/2] ARM: dts: aspeed: sbp1: IBM sbp1 BMC board
2024-11-05 0:33 ` Andrew Jeffery
@ 2024-11-05 4:10 ` Naresh Solanki
2024-11-05 15:47 ` Guenter Roeck
0 siblings, 1 reply; 13+ messages in thread
From: Naresh Solanki @ 2024-11-05 4:10 UTC (permalink / raw)
To: Andrew Jeffery
Cc: robh, krzk+dt, conor+dt, devicetree, linux-kernel, jdelvare,
linux, sylv, linux-hwmon, Joel Stanley, Patrick Rudolph,
linux-arm-kernel, linux-aspeed
Hi Andrew,
On Tue, 5 Nov 2024 at 06:03, Andrew Jeffery <andrew@codeconstruct.com.au> wrote:
>
> On Mon, 2024-11-04 at 14:52 +0530, Naresh Solanki wrote:
> > From: Patrick Rudolph <patrick.rudolph@9elements.com>
> >
> > Add a device tree for IBM sbp1 BMC board which is based on AST2600
> > SOC.
> >
> > sbp1 baseboard has:
> > - support for up to four Sapphire Rapids sockets having 16 DIMMS
> > each.
> > - 240 core/480 threads at maximum
> > - 32x CPU PCIe slots
> > - 2x M.2 PCH PCIe slots
> > - Dual 200Gbit/s NIC
> > - SPI TPM
> >
> > Added the following:
> > - Indication LEDs
> > - I2C mux & GPIO controller, pin assignments,
> > - Thermister,
> > - Voltage regulator
> > - EEPROM/VPD
> >
> > Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
> > Signed-off-by: Naresh Solanki <Naresh.Solanki@9elements.com>
> >
> > ---
> > Changes in V6:
> > - Verified all regulators warning resolved.
>
> How did you verify this? Testing the patches locally, I see:
>
> +/home/andrew/src/kernel.org/linux/origin/build.aspeed_g5/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: pvccinfaon-pvccfa-cpu2@58: 'regulators' does not match any of the regexes: 'pinctrl-[0-9]+'
> + from schema $id: http://devicetree.org/schemas/trivial-devices.yaml#
> +/home/andrew/src/kernel.org/linux/origin/build.aspeed_g5/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: mp2973-pvccin-pvccfa-cpu2@58: 'regulators' does not match any of the regexes: 'pinctrl-[0-9]+'
> + from schema $id: http://devicetree.org/schemas/trivial-devices.yaml#
> +/home/andrew/src/kernel.org/linux/origin/build.aspeed_g5/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: pvccinfaon-pvccfa-cpu1@58: 'regulators' does not match any of the regexes: 'pinctrl-[0-9]+'
> + from schema $id: http://devicetree.org/schemas/trivial-devices.yaml#
> +/home/andrew/src/kernel.org/linux/origin/build.aspeed_g5/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: mp2973-pvccin-pvccfa-cpu1@58: 'regulators' does not match any of the regexes: 'pinctrl-[0-9]+'
> + from schema $id: http://devicetree.org/schemas/trivial-devices.yaml#
> +/home/andrew/src/kernel.org/linux/origin/build.aspeed_g5/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: pvccinfaon-pvccfa-cpu3@58: 'regulators' does not match any of the regexes: 'pinctrl-[0-9]+'
> + from schema $id: http://devicetree.org/schemas/trivial-devices.yaml#
> +/home/andrew/src/kernel.org/linux/origin/build.aspeed_g5/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: mp2973-pvccin-pvccfa-cpu3@58: 'regulators' does not match any of the regexes: 'pinctrl-[0-9]+'
> + from schema $id: http://devicetree.org/schemas/trivial-devices.yaml#
> +/home/andrew/src/kernel.org/linux/origin/build.aspeed_g5/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: regulator@5f: 'regulators' does not match any of the regexes: 'pinctrl-[0-9]+'
> + from schema $id: http://devicetree.org/schemas/trivial-devices.yaml#
> +/home/andrew/src/kernel.org/linux/origin/build.aspeed_g5/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: regulator@5f: 'regulators' does not match any of the regexes: 'pinctrl-[0-9]+'
> + from schema $id: http://devicetree.org/schemas/trivial-devices.yaml#
> +/home/andrew/src/kernel.org/linux/origin/build.aspeed_g5/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: regulator@5f: 'regulators' does not match any of the regexes: 'pinctrl-[0-9]+'
> + from schema $id: http://devicetree.org/schemas/trivial-devices.yaml#
> +/home/andrew/src/kernel.org/linux/origin/build.aspeed_g5/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: regulator@5f: 'regulators' does not match any of the regexes: 'pinctrl-[0-9]+'
> + from schema $id: http://devicetree.org/schemas/trivial-devices.yaml#
> +/home/andrew/src/kernel.org/linux/origin/build.aspeed_g5/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: pvccinfaon-pvccfa-cpu0@58: 'regulators' does not match any of the regexes: 'pinctrl-[0-9]+'
> + from schema $id: http://devicetree.org/schemas/trivial-devices.yaml#
> +/home/andrew/src/kernel.org/linux/origin/build.aspeed_g5/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: mp2973-pvccin-pvccfa-cpu0@58: 'regulators' does not match any of the regexes: 'pinctrl-[0-9]+'
> + from schema $id: http://devicetree.org/schemas/trivial-devices.yaml#
>
> From a spot check, the warnings seem legitimate. Did you send the right
> patches?
Just checked again. They are resolved. But I guess the dtbinding patch
for the above warning are merged in hwmon-next branch & not in dt/next
Regards,
Naresh
>
> Andrew
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH v6 2/2] ARM: dts: aspeed: sbp1: IBM sbp1 BMC board
2024-11-05 4:10 ` Naresh Solanki
@ 2024-11-05 15:47 ` Guenter Roeck
2024-11-05 17:34 ` Naresh Solanki
2024-11-05 23:21 ` Andrew Jeffery
0 siblings, 2 replies; 13+ messages in thread
From: Guenter Roeck @ 2024-11-05 15:47 UTC (permalink / raw)
To: Naresh Solanki, Andrew Jeffery
Cc: robh, krzk+dt, conor+dt, devicetree, linux-kernel, jdelvare, sylv,
linux-hwmon, Joel Stanley, Patrick Rudolph, linux-arm-kernel,
linux-aspeed
On 11/4/24 20:10, Naresh Solanki wrote:
[ ... ]
>> From a spot check, the warnings seem legitimate. Did you send the right
>> patches?
> Just checked again. They are resolved. But I guess the dtbinding patch
> for the above warning are merged in hwmon-next branch & not in dt/next
>
Did I apply some patches which should have been applied elsewhere ?
If so, please let me know, and I'll drop them.
Guenter
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH v6 2/2] ARM: dts: aspeed: sbp1: IBM sbp1 BMC board
2024-11-05 15:47 ` Guenter Roeck
@ 2024-11-05 17:34 ` Naresh Solanki
2024-11-05 23:21 ` Andrew Jeffery
1 sibling, 0 replies; 13+ messages in thread
From: Naresh Solanki @ 2024-11-05 17:34 UTC (permalink / raw)
To: Guenter Roeck
Cc: Andrew Jeffery, robh, krzk+dt, conor+dt, devicetree, linux-kernel,
jdelvare, sylv, linux-hwmon, Joel Stanley, Patrick Rudolph,
linux-arm-kernel, linux-aspeed
Hi Andrew, Guenter,
@Andrew Shall I resend this patch series along with dependent
dt-binding patches ?
On Tue, 5 Nov 2024 at 21:17, Guenter Roeck <linux@roeck-us.net> wrote:
>
> On 11/4/24 20:10, Naresh Solanki wrote:
> [ ... ]
>
> >> From a spot check, the warnings seem legitimate. Did you send the right
> >> patches?
> > Just checked again. They are resolved. But I guess the dtbinding patch
> > for the above warning are merged in hwmon-next branch & not in dt/next
> >
>
> Did I apply some patches which should have been applied elsewhere ?
I think it should be fine.
Regards,
Naresh
>
> If so, please let me know, and I'll drop them.
>
> Guenter
>
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH v6 1/2] dt-bindings: arm: aspeed: add IBM SBP1 board
2024-11-05 0:09 ` Andrew Jeffery
@ 2024-11-05 18:53 ` Conor Dooley
2024-11-05 23:34 ` Andrew Jeffery
0 siblings, 1 reply; 13+ messages in thread
From: Conor Dooley @ 2024-11-05 18:53 UTC (permalink / raw)
To: Andrew Jeffery
Cc: Rob Herring (Arm), Naresh Solanki, jdelvare, Conor Dooley,
linux-aspeed, linux-kernel, devicetree, krzk+dt, sylv,
linux-arm-kernel, linux-hwmon, linux, Joel Stanley, conor+dt
[-- Attachment #1: Type: text/plain, Size: 2780 bytes --]
On Tue, Nov 05, 2024 at 10:39:34AM +1030, Andrew Jeffery wrote:
> Hi Conor,
>
> On Mon, 2024-11-04 at 18:49 +0000, Conor Dooley wrote:
> > On Mon, Nov 04, 2024 at 08:39:21AM -0600, Rob Herring (Arm) wrote:
> > >
> > > On Mon, 04 Nov 2024 14:52:14 +0530, Naresh Solanki wrote:
> > > > Document the new compatibles used on IBM SBP1.
> > > >
> > > > Signed-off-by: Naresh Solanki <naresh.solanki@9elements.com>
> > > > Acked-by: Conor Dooley <conor.dooley@microchip.com>
> > > > ---
> > > > Changes in V4:
> > > > - Retain Acked-by from v2.
> > > > - Fix alphabetic order
> > > > ---
> > > > Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml | 1 +
> > > > 1 file changed, 1 insertion(+)
> > > >
> > >
> > >
> > > My bot found new DTB warnings on the .dts files added or changed in
> > > this
> > > series.
> > >
> > > Some warnings may be from an existing SoC .dtsi. Or perhaps the
> > > warnings
> > > are fixed by another series. Ultimately, it is up to the platform
> > > maintainer whether these warnings are acceptable or not. No need to
> > > reply
> > > unless the platform maintainer has comments.
> > >
> > > If you already ran DT checks and didn't see these error(s), then
> > > make sure dt-schema is up to date:
> > >
> > > pip3 install dtschema --upgrade
> > >
> > >
> > > New warnings running 'make CHECK_DTBS=y aspeed/aspeed-bmc-ibm-
> > > sbp1.dtb' for
> > > 20241104092220.2268805-1-naresh.solanki@9elements.com:
> >
> > Really? This many warnings on a v6?
> >
>
> I understand that it's surprising and disappointing, however these
> warnings are from the Aspeed DTSIs and not directly from the proposed
> DTS. Many are an artefact of history, and I'm (slowly) working to clean
> them up. Recently I haven't had any time to dedicate to that effort,
> and as I'm somewhat responsible for the state of things, I'm not
> prepared to block other people's patches and push my own
> responsibilities onto them.
Ah, you see that's where I would say "no new warnings" and get the
submitter to fix them ;) And were I the submitter, I'd want to resolve
the warnings rather than run into issues down the road when things get
"fixed"/documented. But I guess that's why I have the schmucks task of
reviewing bindings innit..
> I've been replying to those proposing new Aspeed-based devicetrees to
> separate the warnings they're introducing from the warnings that
> already exist, and requiring them to fix the issues they're responsible
> for. I hope that I'll have time to continue to improve the situation,
> as this is obviously a tedious task for me too.
Well, it is your platform and if you're confident that these nodes are
correct despite the warnings, who am I to stop you!
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH v6 2/2] ARM: dts: aspeed: sbp1: IBM sbp1 BMC board
2024-11-05 15:47 ` Guenter Roeck
2024-11-05 17:34 ` Naresh Solanki
@ 2024-11-05 23:21 ` Andrew Jeffery
1 sibling, 0 replies; 13+ messages in thread
From: Andrew Jeffery @ 2024-11-05 23:21 UTC (permalink / raw)
To: Guenter Roeck, Naresh Solanki
Cc: robh, krzk+dt, conor+dt, devicetree, linux-kernel, jdelvare, sylv,
linux-hwmon, Joel Stanley, Patrick Rudolph, linux-arm-kernel,
linux-aspeed
On Tue, 2024-11-05 at 07:47 -0800, Guenter Roeck wrote:
> On 11/4/24 20:10, Naresh Solanki wrote:
> [ ... ]
>
> > > From a spot check, the warnings seem legitimate. Did you send
> > > the right
> > > patches?
> > Just checked again. They are resolved. But I guess the dtbinding
> > patch
> > for the above warning are merged in hwmon-next branch & not in
> > dt/next
> >
>
> Did I apply some patches which should have been applied elsewhere ?
>
> If so, please let me know, and I'll drop them.
No need to drop anything for now: It was just that bindings for some
hwmon devices defined in hwmon-next are used in Naresh's devicetree
here.
Merging hwmon-next and applying his patches resolves my concerns.
Unless anyone feels otherwise, I expect we can can carry on
independently with the understanding it will be resolved in the same
way at the next rc1 (barring any other concerns with Naresh's patches).
Andrew
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH v6 1/2] dt-bindings: arm: aspeed: add IBM SBP1 board
2024-11-05 18:53 ` Conor Dooley
@ 2024-11-05 23:34 ` Andrew Jeffery
0 siblings, 0 replies; 13+ messages in thread
From: Andrew Jeffery @ 2024-11-05 23:34 UTC (permalink / raw)
To: Conor Dooley
Cc: Rob Herring (Arm), Naresh Solanki, jdelvare, Conor Dooley,
linux-aspeed, linux-kernel, devicetree, krzk+dt, sylv,
linux-arm-kernel, linux-hwmon, linux, Joel Stanley, conor+dt
On Tue, 2024-11-05 at 18:53 +0000, Conor Dooley wrote:
> On Tue, Nov 05, 2024 at 10:39:34AM +1030, Andrew Jeffery wrote:
> > Hi Conor,
> >
> > On Mon, 2024-11-04 at 18:49 +0000, Conor Dooley wrote:
> > > On Mon, Nov 04, 2024 at 08:39:21AM -0600, Rob Herring (Arm)
> > > wrote:
> > > >
> > > > On Mon, 04 Nov 2024 14:52:14 +0530, Naresh Solanki wrote:
> > > > > Document the new compatibles used on IBM SBP1.
> > > > >
> > > > > Signed-off-by: Naresh Solanki <naresh.solanki@9elements.com>
> > > > > Acked-by: Conor Dooley <conor.dooley@microchip.com>
> > > > > ---
> > > > > Changes in V4:
> > > > > - Retain Acked-by from v2.
> > > > > - Fix alphabetic order
> > > > > ---
> > > > > Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml | 1
> > > > > +
> > > > > 1 file changed, 1 insertion(+)
> > > > >
> > > >
> > > >
> > > > My bot found new DTB warnings on the .dts files added or
> > > > changed in
> > > > this
> > > > series.
> > > >
> > > > Some warnings may be from an existing SoC .dtsi. Or perhaps the
> > > > warnings
> > > > are fixed by another series. Ultimately, it is up to the
> > > > platform
> > > > maintainer whether these warnings are acceptable or not. No
> > > > need to
> > > > reply
> > > > unless the platform maintainer has comments.
> > > >
> > > > If you already ran DT checks and didn't see these error(s),
> > > > then
> > > > make sure dt-schema is up to date:
> > > >
> > > > pip3 install dtschema --upgrade
> > > >
> > > >
> > > > New warnings running 'make CHECK_DTBS=y aspeed/aspeed-bmc-ibm-
> > > > sbp1.dtb' for
> > > > 20241104092220.2268805-1-naresh.solanki@9elements.com:
> > >
> > > Really? This many warnings on a v6?
> > >
> >
> > I understand that it's surprising and disappointing, however these
> > warnings are from the Aspeed DTSIs and not directly from the
> > proposed
> > DTS. Many are an artefact of history, and I'm (slowly) working to
> > clean
> > them up. Recently I haven't had any time to dedicate to that
> > effort,
> > and as I'm somewhat responsible for the state of things, I'm not
> > prepared to block other people's patches and push my own
> > responsibilities onto them.
>
> Ah, you see that's where I would say "no new warnings" and get the
> submitter to fix them ;) And were I the submitter, I'd want to
> resolve
> the warnings rather than run into issues down the road when things
> get
> "fixed"/documented.But I guess that's why I have the schmucks task of
> reviewing bindings innit..
I have to manage that in tension with my concern of people simply not
upstreaming their devicetrees in response. I'd prefer to have them
merged upstream than to encourage more forks in this corner of the
world. If people would like to take the initiative and do the binding
conversions, corrections and devicetree fixes themselves, I'll
definitely review them.
>
> > I've been replying to those proposing new Aspeed-based devicetrees
> > to
> > separate the warnings they're introducing from the warnings that
> > already exist, and requiring them to fix the issues they're
> > responsible
> > for. I hope that I'll have time to continue to improve the
> > situation,
> > as this is obviously a tedious task for me too.
>
> Well, it is your platform and if you're confident that these nodes
> are
> correct despite the warnings, who am I to stop you!
I think where things stand currently is a bit fuzzier than anyone would
like. The nodes are not incorrect to the point of being non-functional
with respect to their intent, but clearly they're not so correct that
they do not have room for improvement.
Andrew
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH v6 1/2] dt-bindings: arm: aspeed: add IBM SBP1 board
2024-11-04 9:22 [PATCH v6 1/2] dt-bindings: arm: aspeed: add IBM SBP1 board Naresh Solanki
2024-11-04 9:22 ` [PATCH v6 2/2] ARM: dts: aspeed: sbp1: IBM sbp1 BMC board Naresh Solanki
2024-11-04 14:39 ` [PATCH v6 1/2] dt-bindings: arm: aspeed: add IBM SBP1 board Rob Herring (Arm)
@ 2024-11-06 0:37 ` Andrew Jeffery
2 siblings, 0 replies; 13+ messages in thread
From: Andrew Jeffery @ 2024-11-06 0:37 UTC (permalink / raw)
To: robh, krzk+dt, conor+dt, devicetree, linux-kernel, jdelvare,
linux, sylv, linux-hwmon, Joel Stanley, Naresh Solanki
Cc: Conor Dooley, linux-arm-kernel, linux-aspeed
On Mon, 04 Nov 2024 14:52:14 +0530, Naresh Solanki wrote:
> Document the new compatibles used on IBM SBP1.
>
>
Thanks, I've applied this to be picked up through the BMC tree.
--
Andrew Jeffery <andrew@codeconstruct.com.au>
^ permalink raw reply [flat|nested] 13+ messages in thread
end of thread, other threads:[~2024-11-06 0:37 UTC | newest]
Thread overview: 13+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2024-11-04 9:22 [PATCH v6 1/2] dt-bindings: arm: aspeed: add IBM SBP1 board Naresh Solanki
2024-11-04 9:22 ` [PATCH v6 2/2] ARM: dts: aspeed: sbp1: IBM sbp1 BMC board Naresh Solanki
2024-11-05 0:33 ` Andrew Jeffery
2024-11-05 4:10 ` Naresh Solanki
2024-11-05 15:47 ` Guenter Roeck
2024-11-05 17:34 ` Naresh Solanki
2024-11-05 23:21 ` Andrew Jeffery
2024-11-04 14:39 ` [PATCH v6 1/2] dt-bindings: arm: aspeed: add IBM SBP1 board Rob Herring (Arm)
2024-11-04 18:49 ` Conor Dooley
2024-11-05 0:09 ` Andrew Jeffery
2024-11-05 18:53 ` Conor Dooley
2024-11-05 23:34 ` Andrew Jeffery
2024-11-06 0:37 ` Andrew Jeffery
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox