[PATCH v7 03/10] misc: amd-sbi: Move hwmon device sensor as separate entity

[Akshay Gupta <akshay.gupta@amd.com>]

- Move hwmon device sensor to misc as only power is reported through
  hwmon sensor.

Reviewed-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com>
Signed-off-by: Akshay Gupta <akshay.gupta@amd.com>
---
Changes since v6:
- Fix "Missing a blank line after declarations" warning

Changes since v5:
- Patch rebased

Changes since v4:
New patch: Patch split from v4 patch 1/9
- Update Copyright year to 2025

 drivers/misc/amd-sbi/Makefile    |   2 +-
 drivers/misc/amd-sbi/rmi-core.h  |   1 +
 drivers/misc/amd-sbi/rmi-hwmon.c | 124 +++++++++++++++++++++++++++++++
 drivers/misc/amd-sbi/rmi-i2c.c   | 107 +-------------------------
 4 files changed, 128 insertions(+), 106 deletions(-)
 create mode 100644 drivers/misc/amd-sbi/rmi-hwmon.c

diff --git a/drivers/misc/amd-sbi/Makefile b/drivers/misc/amd-sbi/Makefile
index 7cd8e0a1aa5d..eac90a7635de 100644
--- a/drivers/misc/amd-sbi/Makefile
+++ b/drivers/misc/amd-sbi/Makefile
@@ -1,3 +1,3 @@
 # SPDX-License-Identifier: GPL-2.0-only
-sbrmi-i2c-objs  		:= rmi-i2c.o rmi-core.o
+sbrmi-i2c-objs  		:= rmi-i2c.o rmi-core.o rmi-hwmon.o
 obj-$(CONFIG_AMD_SBRMI_I2C)	+= sbrmi-i2c.o
diff --git a/drivers/misc/amd-sbi/rmi-core.h b/drivers/misc/amd-sbi/rmi-core.h
index 8e30a43ec714..27165d3bb20f 100644
--- a/drivers/misc/amd-sbi/rmi-core.h
+++ b/drivers/misc/amd-sbi/rmi-core.h
@@ -60,4 +60,5 @@ struct sbrmi_mailbox_msg {
 };
 
 int rmi_mailbox_xfer(struct sbrmi_data *data, struct sbrmi_mailbox_msg *msg);
+int create_hwmon_sensor_device(struct device *dev, struct sbrmi_data *data);
 #endif /*_SBRMI_CORE_H_*/
diff --git a/drivers/misc/amd-sbi/rmi-hwmon.c b/drivers/misc/amd-sbi/rmi-hwmon.c
new file mode 100644
index 000000000000..9a86fc4a0e7d
--- /dev/null
+++ b/drivers/misc/amd-sbi/rmi-hwmon.c
@@ -0,0 +1,124 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * rmi-hwmon.c - hwmon sensor support for side band RMI
+ *
+ * Copyright (C) 2025 Advanced Micro Devices, Inc.
+ */
+#include <linux/err.h>
+#include <linux/hwmon.h>
+#include "rmi-core.h"
+
+/* Do not allow setting negative power limit */
+#define SBRMI_PWR_MIN  0
+
+static int sbrmi_read(struct device *dev, enum hwmon_sensor_types type,
+		      u32 attr, int channel, long *val)
+{
+	struct sbrmi_data *data = dev_get_drvdata(dev);
+	struct sbrmi_mailbox_msg msg = { 0 };
+	int ret;
+
+	if (!data)
+		return -ENODEV;
+
+	if (type != hwmon_power)
+		return -EINVAL;
+
+	msg.read = true;
+	switch (attr) {
+	case hwmon_power_input:
+		msg.cmd = SBRMI_READ_PKG_PWR_CONSUMPTION;
+		ret = rmi_mailbox_xfer(data, &msg);
+		break;
+	case hwmon_power_cap:
+		msg.cmd = SBRMI_READ_PKG_PWR_LIMIT;
+		ret = rmi_mailbox_xfer(data, &msg);
+		break;
+	case hwmon_power_cap_max:
+		msg.data_out = data->pwr_limit_max;
+		ret = 0;
+		break;
+	default:
+		return -EINVAL;
+	}
+	if (ret < 0)
+		return ret;
+	/* hwmon power attributes are in microWatt */
+	*val = (long)msg.data_out * 1000;
+	return ret;
+}
+
+static int sbrmi_write(struct device *dev, enum hwmon_sensor_types type,
+		       u32 attr, int channel, long val)
+{
+	struct sbrmi_data *data = dev_get_drvdata(dev);
+	struct sbrmi_mailbox_msg msg = { 0 };
+
+	if (!data)
+		return -ENODEV;
+
+	if (type != hwmon_power && attr != hwmon_power_cap)
+		return -EINVAL;
+	/*
+	 * hwmon power attributes are in microWatt
+	 * mailbox read/write is in mWatt
+	 */
+	val /= 1000;
+
+	val = clamp_val(val, SBRMI_PWR_MIN, data->pwr_limit_max);
+
+	msg.cmd = SBRMI_WRITE_PKG_PWR_LIMIT;
+	msg.data_in = val;
+	msg.read = false;
+
+	return rmi_mailbox_xfer(data, &msg);
+}
+
+static umode_t sbrmi_is_visible(const void *data,
+				enum hwmon_sensor_types type,
+				u32 attr, int channel)
+{
+	switch (type) {
+	case hwmon_power:
+		switch (attr) {
+		case hwmon_power_input:
+		case hwmon_power_cap_max:
+			return 0444;
+		case hwmon_power_cap:
+			return 0644;
+		}
+		break;
+	default:
+		break;
+	}
+	return 0;
+}
+
+static const struct hwmon_channel_info * const sbrmi_info[] = {
+	HWMON_CHANNEL_INFO(power,
+			   HWMON_P_INPUT | HWMON_P_CAP | HWMON_P_CAP_MAX),
+	NULL
+};
+
+static const struct hwmon_ops sbrmi_hwmon_ops = {
+	.is_visible = sbrmi_is_visible,
+	.read = sbrmi_read,
+	.write = sbrmi_write,
+};
+
+static const struct hwmon_chip_info sbrmi_chip_info = {
+	.ops = &sbrmi_hwmon_ops,
+	.info = sbrmi_info,
+};
+
+int create_hwmon_sensor_device(struct device *dev, struct sbrmi_data *data)
+{
+	if (IS_REACHABLE(CONFIG_HWMON)) {
+		struct device *hwmon_dev;
+
+		hwmon_dev = devm_hwmon_device_register_with_info(dev, "sbrmi", data,
+								 &sbrmi_chip_info, NULL);
+		return PTR_ERR_OR_ZERO(hwmon_dev);
+	}
+	return 0;
+}
diff --git a/drivers/misc/amd-sbi/rmi-i2c.c b/drivers/misc/amd-sbi/rmi-i2c.c
index 49049ce5bd02..9ad4c8093399 100644
--- a/drivers/misc/amd-sbi/rmi-i2c.c
+++ b/drivers/misc/amd-sbi/rmi-i2c.c
@@ -8,7 +8,6 @@
 
 #include <linux/delay.h>
 #include <linux/err.h>
-#include <linux/hwmon.h>
 #include <linux/i2c.h>
 #include <linux/init.h>
 #include <linux/module.h>
@@ -16,9 +15,6 @@
 #include <linux/of.h>
 #include "rmi-core.h"
 
-/* Do not allow setting negative power limit */
-#define SBRMI_PWR_MIN	0
-
 static int sbrmi_enable_alert(struct i2c_client *client)
 {
 	int ctrl;
@@ -40,100 +36,6 @@ static int sbrmi_enable_alert(struct i2c_client *client)
 	return 0;
 }
 
-static int sbrmi_read(struct device *dev, enum hwmon_sensor_types type,
-		      u32 attr, int channel, long *val)
-{
-	struct sbrmi_data *data = dev_get_drvdata(dev);
-	struct sbrmi_mailbox_msg msg = { 0 };
-	int ret;
-
-	if (type != hwmon_power)
-		return -EINVAL;
-
-	msg.read = true;
-	switch (attr) {
-	case hwmon_power_input:
-		msg.cmd = SBRMI_READ_PKG_PWR_CONSUMPTION;
-		ret = rmi_mailbox_xfer(data, &msg);
-		break;
-	case hwmon_power_cap:
-		msg.cmd = SBRMI_READ_PKG_PWR_LIMIT;
-		ret = rmi_mailbox_xfer(data, &msg);
-		break;
-	case hwmon_power_cap_max:
-		msg.data_out = data->pwr_limit_max;
-		ret = 0;
-		break;
-	default:
-		return -EINVAL;
-	}
-	if (ret < 0)
-		return ret;
-	/* hwmon power attributes are in microWatt */
-	*val = (long)msg.data_out * 1000;
-	return ret;
-}
-
-static int sbrmi_write(struct device *dev, enum hwmon_sensor_types type,
-		       u32 attr, int channel, long val)
-{
-	struct sbrmi_data *data = dev_get_drvdata(dev);
-	struct sbrmi_mailbox_msg msg = { 0 };
-
-	if (type != hwmon_power && attr != hwmon_power_cap)
-		return -EINVAL;
-	/*
-	 * hwmon power attributes are in microWatt
-	 * mailbox read/write is in mWatt
-	 */
-	val /= 1000;
-
-	val = clamp_val(val, SBRMI_PWR_MIN, data->pwr_limit_max);
-
-	msg.cmd = SBRMI_WRITE_PKG_PWR_LIMIT;
-	msg.data_in = val;
-	msg.read = false;
-
-	return rmi_mailbox_xfer(data, &msg);
-}
-
-static umode_t sbrmi_is_visible(const void *data,
-				enum hwmon_sensor_types type,
-				u32 attr, int channel)
-{
-	switch (type) {
-	case hwmon_power:
-		switch (attr) {
-		case hwmon_power_input:
-		case hwmon_power_cap_max:
-			return 0444;
-		case hwmon_power_cap:
-			return 0644;
-		}
-		break;
-	default:
-		break;
-	}
-	return 0;
-}
-
-static const struct hwmon_channel_info * const sbrmi_info[] = {
-	HWMON_CHANNEL_INFO(power,
-			   HWMON_P_INPUT | HWMON_P_CAP | HWMON_P_CAP_MAX),
-	NULL
-};
-
-static const struct hwmon_ops sbrmi_hwmon_ops = {
-	.is_visible = sbrmi_is_visible,
-	.read = sbrmi_read,
-	.write = sbrmi_write,
-};
-
-static const struct hwmon_chip_info sbrmi_chip_info = {
-	.ops = &sbrmi_hwmon_ops,
-	.info = sbrmi_info,
-};
-
 static int sbrmi_get_max_pwr_limit(struct sbrmi_data *data)
 {
 	struct sbrmi_mailbox_msg msg = { 0 };
@@ -152,7 +54,6 @@ static int sbrmi_get_max_pwr_limit(struct sbrmi_data *data)
 static int sbrmi_i2c_probe(struct i2c_client *client)
 {
 	struct device *dev = &client->dev;
-	struct device *hwmon_dev;
 	struct sbrmi_data *data;
 	int ret;
 
@@ -173,12 +74,8 @@ static int sbrmi_i2c_probe(struct i2c_client *client)
 	if (ret < 0)
 		return ret;
 
-	if (IS_REACHABLE(CONFIG_HWMON)) {
-		hwmon_dev = devm_hwmon_device_register_with_info(dev, client->name, data,
-								 &sbrmi_chip_info, NULL);
-		ret = PTR_ERR_OR_ZERO(hwmon_dev);
-	}
-	return ret;
+	dev_set_drvdata(dev, data);
+	return create_hwmon_sensor_device(dev, data);
 }
 
 static const struct i2c_device_id sbrmi_id[] = {
-- 
2.25.1