From: Guenter Roeck <linux@roeck-us.net>
To: Hardware Monitoring <linux-hwmon@vger.kernel.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Subject: [PATCH 14/29] hwmon: (lm95241) Rely on subsystem locking
Date: Fri, 17 Oct 2025 06:02:06 -0700 [thread overview]
Message-ID: <20251017130221.1823453-15-linux@roeck-us.net> (raw)
In-Reply-To: <20251017130221.1823453-1-linux@roeck-us.net>
Attribute access is now serialized in the hardware monitoring core,
so locking in the driver code is no longer necessary. Drop it.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
---
drivers/hwmon/lm95241.c | 16 ----------------
1 file changed, 16 deletions(-)
diff --git a/drivers/hwmon/lm95241.c b/drivers/hwmon/lm95241.c
index cad0a0ff8416..456381b0938e 100644
--- a/drivers/hwmon/lm95241.c
+++ b/drivers/hwmon/lm95241.c
@@ -15,7 +15,6 @@
#include <linux/jiffies.h>
#include <linux/hwmon.h>
#include <linux/module.h>
-#include <linux/mutex.h>
#include <linux/slab.h>
#define DEVNAME "lm95241"
@@ -75,7 +74,6 @@ static const u8 lm95241_reg_address[] = {
/* Client data (each client gets its own) */
struct lm95241_data {
struct i2c_client *client;
- struct mutex update_lock;
unsigned long last_updated; /* in jiffies */
unsigned long interval; /* in milli-seconds */
bool valid; /* false until following fields are valid */
@@ -102,8 +100,6 @@ static struct lm95241_data *lm95241_update_device(struct device *dev)
struct lm95241_data *data = dev_get_drvdata(dev);
struct i2c_client *client = data->client;
- mutex_lock(&data->update_lock);
-
if (time_after(jiffies, data->last_updated
+ msecs_to_jiffies(data->interval)) ||
!data->valid) {
@@ -120,9 +116,6 @@ static struct lm95241_data *lm95241_update_device(struct device *dev)
data->last_updated = jiffies;
data->valid = true;
}
-
- mutex_unlock(&data->update_lock);
-
return data;
}
@@ -204,8 +197,6 @@ static int lm95241_write_chip(struct device *dev, u32 attr, int channel,
u8 config;
int ret;
- mutex_lock(&data->update_lock);
-
switch (attr) {
case hwmon_chip_update_interval:
config = data->config & ~CFG_CRMASK;
@@ -231,7 +222,6 @@ static int lm95241_write_chip(struct device *dev, u32 attr, int channel,
ret = -EOPNOTSUPP;
break;
}
- mutex_unlock(&data->update_lock);
return ret;
}
@@ -242,8 +232,6 @@ static int lm95241_write_temp(struct device *dev, u32 attr, int channel,
struct i2c_client *client = data->client;
int ret;
- mutex_lock(&data->update_lock);
-
switch (attr) {
case hwmon_temp_min:
if (channel == 1) {
@@ -313,9 +301,6 @@ static int lm95241_write_temp(struct device *dev, u32 attr, int channel,
ret = -EOPNOTSUPP;
break;
}
-
- mutex_unlock(&data->update_lock);
-
return ret;
}
@@ -443,7 +428,6 @@ static int lm95241_probe(struct i2c_client *client)
return -ENOMEM;
data->client = client;
- mutex_init(&data->update_lock);
/* Initialize the LM95241 chip */
lm95241_init_client(client, data);
--
2.45.2
next prev parent reply other threads:[~2025-10-17 13:02 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-10-17 13:01 [PATCH 00/29] hwmon: Rely on subsystem locking [set 2] Guenter Roeck
2025-10-17 13:01 ` [PATCH 01/29] hwmon: (max127) Rely on subsystem locking Guenter Roeck
2025-10-17 13:01 ` [PATCH 02/29] hwmon: (lm95234) " Guenter Roeck
2025-10-17 13:01 ` [PATCH 03/29] hwmon: (lm92) " Guenter Roeck
2025-10-17 13:01 ` [PATCH 04/29] hwmon: (hs3001) " Guenter Roeck
2025-10-17 13:01 ` [PATCH 05/29] hwmon: (sbtsi_temp) " Guenter Roeck
2025-10-17 13:01 ` [PATCH 06/29] hwmon: (ina2xx) " Guenter Roeck
2025-10-17 13:01 ` [PATCH 07/29] hwmon: (sht4x) " Guenter Roeck
2025-10-17 13:02 ` [PATCH 08/29] hwmon: (ina3221) " Guenter Roeck
2025-10-17 13:02 ` [PATCH 09/29] hwmon: (k10temp) " Guenter Roeck
2025-10-17 13:02 ` [PATCH 10/29] hwmon: (mr75203) Drop unnecessary include file Guenter Roeck
2025-10-17 13:02 ` [PATCH 11/29] hwmon: (powr1220) Rely on subsystem locking Guenter Roeck
2025-10-17 13:02 ` [PATCH 12/29] hwmon: (ftsteutates) " Guenter Roeck
2025-10-17 13:02 ` [PATCH 13/29] hwmon: (ina238) " Guenter Roeck
2025-10-17 13:02 ` Guenter Roeck [this message]
2025-10-17 13:02 ` [PATCH 15/29] hwmon: (aht10) " Guenter Roeck
2025-10-17 13:02 ` [PATCH 16/29] hwmon: (adt7411) " Guenter Roeck
2025-10-17 14:10 ` Nuno Sá
2025-10-17 13:02 ` [PATCH 17/29] hwmon: (ltc2947-core) " Guenter Roeck
2025-10-17 14:11 ` Nuno Sá
2025-10-17 13:02 ` [PATCH 18/29] hwmon: (peci) " Guenter Roeck
2025-10-17 13:02 ` [PATCH 19/29] hwmon: (adt7x10) " Guenter Roeck
2025-10-17 14:08 ` Nuno Sá
2025-10-17 13:02 ` [PATCH 20/29] hwmon: (sfctemp) " Guenter Roeck
2025-10-17 13:02 ` [PATCH 21/29] hwmon: (lochnagar-hwmon) " Guenter Roeck
2025-10-17 13:02 ` [PATCH 22/29] hwmon: (ltc4282) " Guenter Roeck
2025-10-17 14:07 ` Nuno Sá
2025-10-17 13:02 ` [PATCH 23/29] hwmon: (aquacomputer_d5next) " Guenter Roeck
2025-10-17 13:02 ` [PATCH 24/29] hwmon: (gpd-fan) " Guenter Roeck
2025-10-17 13:02 ` [PATCH 25/29] hwmon: (i5500_temp) Drop unnecessary include files Guenter Roeck
2025-10-17 13:02 ` [PATCH 26/29] hwmon: (asus_rog_ryujin) Rely on subsystem locking Guenter Roeck
2025-10-17 13:02 ` [PATCH 27/29] hwmon: (chipcap2) Drop unnecessary include files Guenter Roeck
2025-10-17 13:02 ` [PATCH 28/29] hwmon: (corsair-psu) Rely on subsystem locking Guenter Roeck
2025-10-17 13:02 ` [PATCH 29/29] " Guenter Roeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251017130221.1823453-15-linux@roeck-us.net \
--to=linux@roeck-us.net \
--cc=linux-hwmon@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox