From: Guenter Roeck <linux@roeck-us.net>
To: Hardware Monitoring <linux-hwmon@vger.kernel.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Subject: [PATCH 29/29] hwmon: (corsair-psu) Rely on subsystem locking
Date: Fri, 17 Oct 2025 06:02:21 -0700 [thread overview]
Message-ID: <20251017130221.1823453-30-linux@roeck-us.net> (raw)
In-Reply-To: <20251017130221.1823453-1-linux@roeck-us.net>
Attribute access is now serialized in the hardware monitoring core,
so locking in the driver code is no longer necessary. Drop it.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
---
drivers/hwmon/npcm750-pwm-fan.c | 11 +----------
1 file changed, 1 insertion(+), 10 deletions(-)
diff --git a/drivers/hwmon/npcm750-pwm-fan.c b/drivers/hwmon/npcm750-pwm-fan.c
index 802c73def428..c8f5e695fb6d 100644
--- a/drivers/hwmon/npcm750-pwm-fan.c
+++ b/drivers/hwmon/npcm750-pwm-fan.c
@@ -4,7 +4,6 @@
#include <linux/clk.h>
#include <linux/device.h>
#include <linux/hwmon.h>
-#include <linux/hwmon-sysfs.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/module.h>
@@ -198,7 +197,6 @@ struct npcm7xx_pwm_fan_data {
int pwm_modules;
struct clk *pwm_clk;
struct clk *fan_clk;
- struct mutex pwm_lock[NPCM7XX_PWM_MAX_MODULES];
spinlock_t fan_lock[NPCM7XX_FAN_MAX_MODULE];
int fan_irq[NPCM7XX_FAN_MAX_MODULE];
bool pwm_present[NPCM7XX_PWM_MAX_CHN_NUM];
@@ -221,7 +219,6 @@ static int npcm7xx_pwm_config_set(struct npcm7xx_pwm_fan_data *data,
/*
* Config PWM Comparator register for setting duty cycle
*/
- mutex_lock(&data->pwm_lock[module]);
/* write new CMR value */
iowrite32(val, NPCM7XX_PWM_REG_CMRx(data->pwm_base, module, pwm_ch));
@@ -245,7 +242,6 @@ static int npcm7xx_pwm_config_set(struct npcm7xx_pwm_fan_data *data,
env_bit = NPCM7XX_PWM_CTRL_CH3_INV_BIT;
break;
default:
- mutex_unlock(&data->pwm_lock[module]);
return -ENODEV;
}
@@ -260,8 +256,6 @@ static int npcm7xx_pwm_config_set(struct npcm7xx_pwm_fan_data *data,
}
iowrite32(tmp_buf, NPCM7XX_PWM_REG_CR(data->pwm_base, module));
- mutex_unlock(&data->pwm_lock[module]);
-
return 0;
}
@@ -932,8 +926,8 @@ static int npcm7xx_pwm_fan_probe(struct platform_device *pdev)
struct resource *res;
struct device *hwmon;
char name[20];
- int ret, cnt;
u32 output_freq;
+ int ret;
u32 i;
np = dev->of_node;
@@ -985,9 +979,6 @@ static int npcm7xx_pwm_fan_probe(struct platform_device *pdev)
output_freq = npcm7xx_pwm_init(data);
npcm7xx_fan_init(data);
- for (cnt = 0; cnt < data->pwm_modules; cnt++)
- mutex_init(&data->pwm_lock[cnt]);
-
for (i = 0; i < NPCM7XX_FAN_MAX_MODULE; i++) {
spin_lock_init(&data->fan_lock[i]);
--
2.45.2
prev parent reply other threads:[~2025-10-17 13:03 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-10-17 13:01 [PATCH 00/29] hwmon: Rely on subsystem locking [set 2] Guenter Roeck
2025-10-17 13:01 ` [PATCH 01/29] hwmon: (max127) Rely on subsystem locking Guenter Roeck
2025-10-17 13:01 ` [PATCH 02/29] hwmon: (lm95234) " Guenter Roeck
2025-10-17 13:01 ` [PATCH 03/29] hwmon: (lm92) " Guenter Roeck
2025-10-17 13:01 ` [PATCH 04/29] hwmon: (hs3001) " Guenter Roeck
2025-10-17 13:01 ` [PATCH 05/29] hwmon: (sbtsi_temp) " Guenter Roeck
2025-10-17 13:01 ` [PATCH 06/29] hwmon: (ina2xx) " Guenter Roeck
2025-10-17 13:01 ` [PATCH 07/29] hwmon: (sht4x) " Guenter Roeck
2025-10-17 13:02 ` [PATCH 08/29] hwmon: (ina3221) " Guenter Roeck
2025-10-17 13:02 ` [PATCH 09/29] hwmon: (k10temp) " Guenter Roeck
2025-10-17 13:02 ` [PATCH 10/29] hwmon: (mr75203) Drop unnecessary include file Guenter Roeck
2025-10-17 13:02 ` [PATCH 11/29] hwmon: (powr1220) Rely on subsystem locking Guenter Roeck
2025-10-17 13:02 ` [PATCH 12/29] hwmon: (ftsteutates) " Guenter Roeck
2025-10-17 13:02 ` [PATCH 13/29] hwmon: (ina238) " Guenter Roeck
2025-10-17 13:02 ` [PATCH 14/29] hwmon: (lm95241) " Guenter Roeck
2025-10-17 13:02 ` [PATCH 15/29] hwmon: (aht10) " Guenter Roeck
2025-10-17 13:02 ` [PATCH 16/29] hwmon: (adt7411) " Guenter Roeck
2025-10-17 14:10 ` Nuno Sá
2025-10-17 13:02 ` [PATCH 17/29] hwmon: (ltc2947-core) " Guenter Roeck
2025-10-17 14:11 ` Nuno Sá
2025-10-17 13:02 ` [PATCH 18/29] hwmon: (peci) " Guenter Roeck
2025-10-17 13:02 ` [PATCH 19/29] hwmon: (adt7x10) " Guenter Roeck
2025-10-17 14:08 ` Nuno Sá
2025-10-17 13:02 ` [PATCH 20/29] hwmon: (sfctemp) " Guenter Roeck
2025-10-17 13:02 ` [PATCH 21/29] hwmon: (lochnagar-hwmon) " Guenter Roeck
2025-10-17 13:02 ` [PATCH 22/29] hwmon: (ltc4282) " Guenter Roeck
2025-10-17 14:07 ` Nuno Sá
2025-10-17 13:02 ` [PATCH 23/29] hwmon: (aquacomputer_d5next) " Guenter Roeck
2025-10-17 13:02 ` [PATCH 24/29] hwmon: (gpd-fan) " Guenter Roeck
2025-10-17 13:02 ` [PATCH 25/29] hwmon: (i5500_temp) Drop unnecessary include files Guenter Roeck
2025-10-17 13:02 ` [PATCH 26/29] hwmon: (asus_rog_ryujin) Rely on subsystem locking Guenter Roeck
2025-10-17 13:02 ` [PATCH 27/29] hwmon: (chipcap2) Drop unnecessary include files Guenter Roeck
2025-10-17 13:02 ` [PATCH 28/29] hwmon: (corsair-psu) Rely on subsystem locking Guenter Roeck
2025-10-17 13:02 ` Guenter Roeck [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251017130221.1823453-30-linux@roeck-us.net \
--to=linux@roeck-us.net \
--cc=linux-hwmon@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox