From: Guenter Roeck <linux@roeck-us.net>
To: Hardware Monitoring <linux-hwmon@vger.kernel.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Subject: [PATCH 06/29] hwmon: (ina2xx) Rely on subsystem locking
Date: Fri, 17 Oct 2025 06:01:58 -0700 [thread overview]
Message-ID: <20251017130221.1823453-7-linux@roeck-us.net> (raw)
In-Reply-To: <20251017130221.1823453-1-linux@roeck-us.net>
Attribute access is now serialized in the hardware monitoring core,
so locking in the driver code is no longer necessary. Drop it.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
---
drivers/hwmon/ina2xx.c | 28 ++++++++++------------------
1 file changed, 10 insertions(+), 18 deletions(-)
diff --git a/drivers/hwmon/ina2xx.c b/drivers/hwmon/ina2xx.c
index bc3c1f7314b3..69ac0468dee4 100644
--- a/drivers/hwmon/ina2xx.c
+++ b/drivers/hwmon/ina2xx.c
@@ -156,7 +156,6 @@ struct ina2xx_data {
long rshunt;
long current_lsb_uA;
long power_lsb_uW;
- struct mutex config_lock;
struct regmap *regmap;
struct i2c_client *client;
};
@@ -390,22 +389,19 @@ static int ina226_alert_limit_read(struct ina2xx_data *data, u32 mask, int reg,
int regval;
int ret;
- mutex_lock(&data->config_lock);
ret = regmap_read(regmap, INA226_MASK_ENABLE, ®val);
if (ret)
- goto abort;
+ return ret;
if (regval & mask) {
ret = regmap_read(regmap, INA226_ALERT_LIMIT, ®val);
if (ret)
- goto abort;
+ return ret;
*val = ina2xx_get_value(data, reg, regval);
} else {
*val = 0;
}
-abort:
- mutex_unlock(&data->config_lock);
- return ret;
+ return 0;
}
static int ina226_alert_limit_write(struct ina2xx_data *data, u32 mask, int reg, long val)
@@ -421,23 +417,20 @@ static int ina226_alert_limit_write(struct ina2xx_data *data, u32 mask, int reg,
* due to register write sequence. Then, only enable the alert
* if the value is non-zero.
*/
- mutex_lock(&data->config_lock);
ret = regmap_update_bits(regmap, INA226_MASK_ENABLE,
INA226_ALERT_CONFIG_MASK, 0);
if (ret < 0)
- goto abort;
+ return ret;
ret = regmap_write(regmap, INA226_ALERT_LIMIT,
ina226_alert_to_reg(data, reg, val));
if (ret < 0)
- goto abort;
+ return ret;
if (val)
- ret = regmap_update_bits(regmap, INA226_MASK_ENABLE,
- INA226_ALERT_CONFIG_MASK, mask);
-abort:
- mutex_unlock(&data->config_lock);
- return ret;
+ return regmap_update_bits(regmap, INA226_MASK_ENABLE,
+ INA226_ALERT_CONFIG_MASK, mask);
+ return 0;
}
static int ina2xx_chip_read(struct device *dev, u32 attr, long *val)
@@ -859,9 +852,9 @@ static ssize_t shunt_resistor_store(struct device *dev,
if (status < 0)
return status;
- mutex_lock(&data->config_lock);
+ hwmon_lock(dev);
status = ina2xx_set_shunt(data, val);
- mutex_unlock(&data->config_lock);
+ hwmon_unlock(dev);
if (status < 0)
return status;
return count;
@@ -951,7 +944,6 @@ static int ina2xx_probe(struct i2c_client *client)
data->client = client;
data->config = &ina2xx_config[chip];
data->chip = chip;
- mutex_init(&data->config_lock);
data->regmap = devm_regmap_init_i2c(client, &ina2xx_regmap_config);
if (IS_ERR(data->regmap)) {
--
2.45.2
next prev parent reply other threads:[~2025-10-17 13:02 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-10-17 13:01 [PATCH 00/29] hwmon: Rely on subsystem locking [set 2] Guenter Roeck
2025-10-17 13:01 ` [PATCH 01/29] hwmon: (max127) Rely on subsystem locking Guenter Roeck
2025-10-17 13:01 ` [PATCH 02/29] hwmon: (lm95234) " Guenter Roeck
2025-10-17 13:01 ` [PATCH 03/29] hwmon: (lm92) " Guenter Roeck
2025-10-17 13:01 ` [PATCH 04/29] hwmon: (hs3001) " Guenter Roeck
2025-10-17 13:01 ` [PATCH 05/29] hwmon: (sbtsi_temp) " Guenter Roeck
2025-10-17 13:01 ` Guenter Roeck [this message]
2025-10-17 13:01 ` [PATCH 07/29] hwmon: (sht4x) " Guenter Roeck
2025-10-17 13:02 ` [PATCH 08/29] hwmon: (ina3221) " Guenter Roeck
2025-10-17 13:02 ` [PATCH 09/29] hwmon: (k10temp) " Guenter Roeck
2025-10-17 13:02 ` [PATCH 10/29] hwmon: (mr75203) Drop unnecessary include file Guenter Roeck
2025-10-17 13:02 ` [PATCH 11/29] hwmon: (powr1220) Rely on subsystem locking Guenter Roeck
2025-10-17 13:02 ` [PATCH 12/29] hwmon: (ftsteutates) " Guenter Roeck
2025-10-17 13:02 ` [PATCH 13/29] hwmon: (ina238) " Guenter Roeck
2025-10-17 13:02 ` [PATCH 14/29] hwmon: (lm95241) " Guenter Roeck
2025-10-17 13:02 ` [PATCH 15/29] hwmon: (aht10) " Guenter Roeck
2025-10-17 13:02 ` [PATCH 16/29] hwmon: (adt7411) " Guenter Roeck
2025-10-17 14:10 ` Nuno Sá
2025-10-17 13:02 ` [PATCH 17/29] hwmon: (ltc2947-core) " Guenter Roeck
2025-10-17 14:11 ` Nuno Sá
2025-10-17 13:02 ` [PATCH 18/29] hwmon: (peci) " Guenter Roeck
2025-10-17 13:02 ` [PATCH 19/29] hwmon: (adt7x10) " Guenter Roeck
2025-10-17 14:08 ` Nuno Sá
2025-10-17 13:02 ` [PATCH 20/29] hwmon: (sfctemp) " Guenter Roeck
2025-10-17 13:02 ` [PATCH 21/29] hwmon: (lochnagar-hwmon) " Guenter Roeck
2025-10-17 13:02 ` [PATCH 22/29] hwmon: (ltc4282) " Guenter Roeck
2025-10-17 14:07 ` Nuno Sá
2025-10-17 13:02 ` [PATCH 23/29] hwmon: (aquacomputer_d5next) " Guenter Roeck
2025-10-17 13:02 ` [PATCH 24/29] hwmon: (gpd-fan) " Guenter Roeck
2025-10-17 13:02 ` [PATCH 25/29] hwmon: (i5500_temp) Drop unnecessary include files Guenter Roeck
2025-10-17 13:02 ` [PATCH 26/29] hwmon: (asus_rog_ryujin) Rely on subsystem locking Guenter Roeck
2025-10-17 13:02 ` [PATCH 27/29] hwmon: (chipcap2) Drop unnecessary include files Guenter Roeck
2025-10-17 13:02 ` [PATCH 28/29] hwmon: (corsair-psu) Rely on subsystem locking Guenter Roeck
2025-10-17 13:02 ` [PATCH 29/29] " Guenter Roeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251017130221.1823453-7-linux@roeck-us.net \
--to=linux@roeck-us.net \
--cc=linux-hwmon@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox