From: Guenter Roeck <linux@roeck-us.net>
To: linux-hwmon@vger.kernel.org
Cc: "Arnd Bergmann" <arnd@arndb.de>,
"Guenter Roeck" <linux@roeck-us.net>,
"Nuno Sá" <nuno.sa@analog.com>
Subject: [PATCH 05/10] hwmon: (ltc4245) Drop platform data support
Date: Tue, 10 Nov 2026 10:34:28 -0800 [thread overview]
Message-ID: <20261110183434.181711-6-linux@roeck-us.net> (raw)
In-Reply-To: <20261110183434.181711-1-linux@roeck-us.net>
There are no in-tree users of ltc4245_platform_data. Sampling all GPIO
pins as analog voltages is already configurable via the
"ltc4245,use-extra-gpios" devicetree property.
Drop platform data support from the driver, remove the unused
platform_data header file, and update the driver documentation.
Cc: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
---
Documentation/hwmon/ltc4245.rst | 6 ++----
drivers/hwmon/ltc4245.c | 21 +++------------------
include/linux/platform_data/ltc4245.h | 17 -----------------
3 files changed, 5 insertions(+), 39 deletions(-)
delete mode 100644 include/linux/platform_data/ltc4245.h
diff --git a/Documentation/hwmon/ltc4245.rst b/Documentation/hwmon/ltc4245.rst
index 3dafd08a4e87..0c3b823169b9 100644
--- a/Documentation/hwmon/ltc4245.rst
+++ b/Documentation/hwmon/ltc4245.rst
@@ -103,9 +103,7 @@ then they will be sampled in round-robin fashion. If userspace reads too
slowly, -EAGAIN will be returned when you read the sysfs attribute containing
the sensor reading.
-The LTC4245 chip can be configured to sample all GPIO pins with two methods:
-
-1) platform data -- see include/linux/platform_data/ltc4245.h
-2) OF device tree -- add the "ltc4245,use-extra-gpios" property to each chip
+The LTC4245 chip can be configured to sample all GPIO pins by adding the
+"ltc4245,use-extra-gpios" OF device tree property to each chip.
The default mode of operation is to sample a single GPIO pin.
diff --git a/drivers/hwmon/ltc4245.c b/drivers/hwmon/ltc4245.c
index e7fcf607a05e..7425c801cfe5 100644
--- a/drivers/hwmon/ltc4245.c
+++ b/drivers/hwmon/ltc4245.c
@@ -19,7 +19,7 @@
#include <linux/i2c.h>
#include <linux/hwmon.h>
#include <linux/jiffies.h>
-#include <linux/platform_data/ltc4245.h>
+#include <linux/of.h>
/* Here are names of the chip's registers (a.k.a. commands) */
enum ltc4245_cmd {
@@ -418,22 +418,6 @@ static const struct hwmon_chip_info ltc4245_chip_info = {
.info = ltc4245_info,
};
-static bool ltc4245_use_extra_gpios(struct i2c_client *client)
-{
- struct ltc4245_platform_data *pdata = dev_get_platdata(&client->dev);
- struct device_node *np = client->dev.of_node;
-
- /* prefer platform data */
- if (pdata)
- return pdata->use_extra_gpios;
-
- /* fallback on OF */
- if (of_property_read_bool(np, "ltc4245,use-extra-gpios"))
- return true;
-
- return false;
-}
-
static int ltc4245_probe(struct i2c_client *client)
{
struct i2c_adapter *adapter = client->adapter;
@@ -448,7 +432,8 @@ static int ltc4245_probe(struct i2c_client *client)
return -ENOMEM;
data->client = client;
- data->use_extra_gpios = ltc4245_use_extra_gpios(client);
+ data->use_extra_gpios = of_property_read_bool(client->dev.of_node,
+ "ltc4245,use-extra-gpios");
/* Initialize the LTC4245 chip */
i2c_smbus_write_byte_data(client, LTC4245_FAULT1, 0x00);
diff --git a/include/linux/platform_data/ltc4245.h b/include/linux/platform_data/ltc4245.h
deleted file mode 100644
index f07fa05ea6c4..000000000000
--- a/include/linux/platform_data/ltc4245.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * Platform Data for LTC4245 hardware monitor chip
- *
- * Copyright (c) 2010 Ira W. Snyder <iws@ovro.caltech.edu>
- */
-
-#ifndef LINUX_LTC4245_H
-#define LINUX_LTC4245_H
-
-#include <linux/types.h>
-
-struct ltc4245_platform_data {
- bool use_extra_gpios;
-};
-
-#endif /* LINUX_LTC4245_H */
--
2.45.2
next prev parent reply other threads:[~2026-11-10 18:34 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-10 18:34 [PATCH 00/10] hwmon: Drop unused platform data support and max197 driver Guenter Roeck
2026-11-10 18:34 ` [PATCH 01/10] hwmon: (ads7828) Drop platform data support Guenter Roeck
2026-11-10 18:45 ` Arnd Bergmann
2026-11-10 19:40 ` Guenter Roeck
2026-11-10 19:49 ` Arnd Bergmann
2026-11-12 18:25 ` Guenter Roeck
2026-11-10 18:34 ` [PATCH 02/10] hwmon: (emc2305) " Guenter Roeck
2026-11-10 18:56 ` Arnd Bergmann
2026-11-12 19:06 ` Guenter Roeck
2026-11-10 18:34 ` [PATCH 03/10] hwmon: (g762) " Guenter Roeck
2026-11-10 19:09 ` Arnd Bergmann
2026-11-12 19:08 ` Guenter Roeck
2026-11-10 18:34 ` [PATCH 04/10] hwmon: (gsc-hwmon) " Guenter Roeck
2026-11-10 19:11 ` Arnd Bergmann
2026-11-12 19:09 ` Guenter Roeck
2026-11-10 18:34 ` Guenter Roeck [this message]
2026-11-10 18:58 ` [PATCH 05/10] hwmon: (ltc4245) " Arnd Bergmann
2026-11-12 19:11 ` Guenter Roeck
2026-11-11 9:54 ` Nuno Sá
2026-11-10 18:34 ` [PATCH 06/10] hwmon: (mcp3021) " Guenter Roeck
2026-11-10 19:12 ` Arnd Bergmann
2026-11-12 19:14 ` Guenter Roeck
2026-11-10 18:34 ` [PATCH 07/10] hwmon: (shtc1) " Guenter Roeck
2026-11-10 19:00 ` Arnd Bergmann
2026-11-12 19:18 ` Guenter Roeck
2026-11-10 18:34 ` [PATCH 08/10] hwmon: (max197) Remove driver Guenter Roeck
2026-11-10 19:02 ` Arnd Bergmann
2026-11-12 19:22 ` Guenter Roeck
2026-11-11 9:49 ` Nuno Sá
2026-11-10 18:34 ` [PATCH 09/10] hwmon: (f75375s) Drop platform data support Guenter Roeck
2026-11-10 19:18 ` Arnd Bergmann
2026-11-10 19:43 ` Guenter Roeck
2026-11-12 19:25 ` Guenter Roeck
2026-11-10 18:34 ` [PATCH 10/10] hwmon: (ds620) " Guenter Roeck
2026-11-10 19:07 ` Arnd Bergmann
2026-11-10 19:41 ` Guenter Roeck
2026-11-12 19:29 ` Guenter Roeck
2026-11-11 9:56 ` Nuno Sá
2026-11-10 19:24 ` [PATCH 00/10] hwmon: Drop unused platform data support and max197 driver Arnd Bergmann
2026-11-10 19:50 ` Guenter Roeck
2026-11-10 20:31 ` Arnd Bergmann
2026-11-12 19:31 ` Guenter Roeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261110183434.181711-6-linux@roeck-us.net \
--to=linux@roeck-us.net \
--cc=arnd@arndb.de \
--cc=linux-hwmon@vger.kernel.org \
--cc=nuno.sa@analog.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox