From: "Nuno Sá" <nuno.sa@analog.com>
To: Guenter Roeck <linux@roeck-us.net>
Cc: linux-hwmon@vger.kernel.org, Arnd Bergmann <arnd@arndb.de>
Subject: Re: [PATCH 05/10] hwmon: (ltc4245) Drop platform data support
Date: Wed, 11 Nov 2026 09:54:36 +0000 [thread overview]
Message-ID: <avQ7PdXKmabocxPj@nsa> (raw)
In-Reply-To: <20261110183434.181711-6-linux@roeck-us.net>
On Tue, Nov 10, 2026 at 10:34:28AM -0800, Guenter Roeck wrote:
> There are no in-tree users of ltc4245_platform_data. Sampling all GPIO
> pins as analog voltages is already configurable via the
> "ltc4245,use-extra-gpios" devicetree property.
>
> Drop platform data support from the driver, remove the unused
> platform_data header file, and update the driver documentation.
>
> Cc: Nuno Sá <nuno.sa@analog.com>
> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
> ---
Thanks!
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
> Documentation/hwmon/ltc4245.rst | 6 ++----
> drivers/hwmon/ltc4245.c | 21 +++------------------
> include/linux/platform_data/ltc4245.h | 17 -----------------
> 3 files changed, 5 insertions(+), 39 deletions(-)
> delete mode 100644 include/linux/platform_data/ltc4245.h
>
> diff --git a/Documentation/hwmon/ltc4245.rst b/Documentation/hwmon/ltc4245.rst
> index 3dafd08a4e87..0c3b823169b9 100644
> --- a/Documentation/hwmon/ltc4245.rst
> +++ b/Documentation/hwmon/ltc4245.rst
> @@ -103,9 +103,7 @@ then they will be sampled in round-robin fashion. If userspace reads too
> slowly, -EAGAIN will be returned when you read the sysfs attribute containing
> the sensor reading.
>
> -The LTC4245 chip can be configured to sample all GPIO pins with two methods:
> -
> -1) platform data -- see include/linux/platform_data/ltc4245.h
> -2) OF device tree -- add the "ltc4245,use-extra-gpios" property to each chip
> +The LTC4245 chip can be configured to sample all GPIO pins by adding the
> +"ltc4245,use-extra-gpios" OF device tree property to each chip.
>
> The default mode of operation is to sample a single GPIO pin.
> diff --git a/drivers/hwmon/ltc4245.c b/drivers/hwmon/ltc4245.c
> index e7fcf607a05e..7425c801cfe5 100644
> --- a/drivers/hwmon/ltc4245.c
> +++ b/drivers/hwmon/ltc4245.c
> @@ -19,7 +19,7 @@
> #include <linux/i2c.h>
> #include <linux/hwmon.h>
> #include <linux/jiffies.h>
> -#include <linux/platform_data/ltc4245.h>
> +#include <linux/of.h>
>
> /* Here are names of the chip's registers (a.k.a. commands) */
> enum ltc4245_cmd {
> @@ -418,22 +418,6 @@ static const struct hwmon_chip_info ltc4245_chip_info = {
> .info = ltc4245_info,
> };
>
> -static bool ltc4245_use_extra_gpios(struct i2c_client *client)
> -{
> - struct ltc4245_platform_data *pdata = dev_get_platdata(&client->dev);
> - struct device_node *np = client->dev.of_node;
> -
> - /* prefer platform data */
> - if (pdata)
> - return pdata->use_extra_gpios;
> -
> - /* fallback on OF */
> - if (of_property_read_bool(np, "ltc4245,use-extra-gpios"))
> - return true;
> -
> - return false;
> -}
> -
> static int ltc4245_probe(struct i2c_client *client)
> {
> struct i2c_adapter *adapter = client->adapter;
> @@ -448,7 +432,8 @@ static int ltc4245_probe(struct i2c_client *client)
> return -ENOMEM;
>
> data->client = client;
> - data->use_extra_gpios = ltc4245_use_extra_gpios(client);
> + data->use_extra_gpios = of_property_read_bool(client->dev.of_node,
> + "ltc4245,use-extra-gpios");
>
> /* Initialize the LTC4245 chip */
> i2c_smbus_write_byte_data(client, LTC4245_FAULT1, 0x00);
> diff --git a/include/linux/platform_data/ltc4245.h b/include/linux/platform_data/ltc4245.h
> deleted file mode 100644
> index f07fa05ea6c4..000000000000
> --- a/include/linux/platform_data/ltc4245.h
> +++ /dev/null
> @@ -1,17 +0,0 @@
> -/* SPDX-License-Identifier: GPL-2.0-or-later */
> -/*
> - * Platform Data for LTC4245 hardware monitor chip
> - *
> - * Copyright (c) 2010 Ira W. Snyder <iws@ovro.caltech.edu>
> - */
> -
> -#ifndef LINUX_LTC4245_H
> -#define LINUX_LTC4245_H
> -
> -#include <linux/types.h>
> -
> -struct ltc4245_platform_data {
> - bool use_extra_gpios;
> -};
> -
> -#endif /* LINUX_LTC4245_H */
> --
> 2.45.2
>
next prev parent reply other threads:[~2026-11-11 9:53 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-10 18:34 [PATCH 00/10] hwmon: Drop unused platform data support and max197 driver Guenter Roeck
2026-11-10 18:34 ` [PATCH 01/10] hwmon: (ads7828) Drop platform data support Guenter Roeck
2026-11-10 18:45 ` Arnd Bergmann
2026-11-10 19:40 ` Guenter Roeck
2026-11-10 19:49 ` Arnd Bergmann
2026-11-10 18:34 ` [PATCH 02/10] hwmon: (emc2305) " Guenter Roeck
2026-11-10 18:56 ` Arnd Bergmann
2026-11-10 18:34 ` [PATCH 03/10] hwmon: (g762) " Guenter Roeck
2026-11-10 19:09 ` Arnd Bergmann
2026-11-10 18:34 ` [PATCH 04/10] hwmon: (gsc-hwmon) " Guenter Roeck
2026-11-10 19:11 ` Arnd Bergmann
2026-11-10 18:34 ` [PATCH 05/10] hwmon: (ltc4245) " Guenter Roeck
2026-11-10 18:58 ` Arnd Bergmann
2026-11-11 9:54 ` Nuno Sá [this message]
2026-11-10 18:34 ` [PATCH 06/10] hwmon: (mcp3021) " Guenter Roeck
2026-11-10 19:12 ` Arnd Bergmann
2026-11-10 18:34 ` [PATCH 07/10] hwmon: (shtc1) " Guenter Roeck
2026-11-10 19:00 ` Arnd Bergmann
2026-11-10 18:34 ` [PATCH 08/10] hwmon: (max197) Remove driver Guenter Roeck
2026-11-10 19:02 ` Arnd Bergmann
2026-11-11 9:49 ` Nuno Sá
2026-11-10 18:34 ` [PATCH 09/10] hwmon: (f75375s) Drop platform data support Guenter Roeck
2026-11-10 19:18 ` Arnd Bergmann
2026-11-10 19:43 ` Guenter Roeck
2026-11-10 18:34 ` [PATCH 10/10] hwmon: (ds620) " Guenter Roeck
2026-11-10 19:07 ` Arnd Bergmann
2026-11-10 19:41 ` Guenter Roeck
2026-11-11 9:56 ` Nuno Sá
2026-11-10 19:24 ` [PATCH 00/10] hwmon: Drop unused platform data support and max197 driver Arnd Bergmann
2026-11-10 19:50 ` Guenter Roeck
2026-11-10 20:31 ` Arnd Bergmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=avQ7PdXKmabocxPj@nsa \
--to=nuno.sa@analog.com \
--cc=arnd@arndb.de \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux@roeck-us.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox