Linux-HyperV List
 help / color / mirror / Atom feed
From: Wei Liu <wei.liu@kernel.org>
To: sashiko-reviews@lists.linux.dev
Cc: wei.liu@kernel.org, linux-hyperv@vger.kernel.org,
	linux-pci@vger.kernel.org
Subject: Re: [PATCH] PCI: hv: hardwire PCI_INTERRUPT_PIN to 0
Date: Sun, 13 Sep 2026 15:51:57 -0700	[thread overview]
Message-ID: <20260913225157.GG2219269@liuwe-devbox-debian-v2.local> (raw)
In-Reply-To: <20260913221940.05A1A1F000FF@smtp.kernel.org>

On Sun, Sep 13, 2026 at 10:19:39PM +0000, sashiko-bot@kernel.org wrote:
> Thank you for your contribution! Sashiko AI review found 3 potential issue(s) to consider:
> - [Medium] The patch fails to hard-wire `PCI_INTERRUPT_LINE` to 0 during 16/32-bit reads, introducing inconsistent emulation behavior.
> - [Medium] Modifying the returned integer via `char *` pointer arithmetic is broken on big-endian architectures.
> - [Low] Extraneous closing brace causes a syntax error and breaks compilation.
> --
> 
> commit 34dba20e549ad1a394e94eeb91577f3b24614432
> Author: Mukesh R <mrathor@linux.microsoft.com>
> 
> PCI: hv: hardwire PCI_INTERRUPT_PIN to 0
> 
> This commit hardwires PCI_INTERRUPT_PIN to 0 for Hyper-V Discrete Device
> Assignment, as it does not support legacy (INTx) interrupts. It addresses
> an issue where 16-bit or 32-bit reads miss the previous 8-bit emulation
> and yield non-zero values.
> 
> > diff --git a/drivers/pci/controller/pci-hyperv.c b/drivers/pci/controller/pci-hyperv.c
> > index 89816a2bd7cd3..e6db82413addb 100644
> > --- a/drivers/pci/controller/pci-hyperv.c
> > +++ b/drivers/pci/controller/pci-hyperv.c
> > @@ -1240,6 +1240,16 @@ static void _hv_pcifront_read_config(struct hv_pci_dev *hpdev, int where,
> >  			mb();
> >  		}
> >  		spin_unlock_irqrestore(&hbus->config_lock, flags);
> > +
> > +		/*
> > +		 * Make sure PCI_INTERRUPT_PIN is hard-wired to 0, since it
> > +		 * may be read using a 32bit read, which is skipped by the
> > +		 * above emulation.
> > +		 */
> > +		if (where <= PCI_INTERRUPT_PIN &&
> > +		    PCI_INTERRUPT_PIN < (where + size))
> 
> [Severity: Medium]
> Does this logic miss PCI_INTERRUPT_LINE?
> 
> The previous emulation blocks in _hv_pcifront_read_config() explicitly
> hard-wire the 8-bit read of PCI_INTERRUPT_LINE to 0.
> 
> It seems a 16-bit or 32-bit config read encompassing PCI_INTERRUPT_LINE
> would leak the hardware's non-zero value, violating the design intent to
> hide legacy interrupts.
> 

We have not seen this in practice.

> > +			*((char *)val + PCI_INTERRUPT_PIN - where) = 0;
> 
> [Severity: Medium]
> Will modifying the returned integer via char * pointer arithmetic work on
> big-endian architectures?
> 

We don't support big-endian.

> For a 32-bit read on big-endian systems, casting a u32 * to char * and
> indexing by byte offset modifies the wrong byte in memory.
> 
> This could fail to clear PCI_INTERRUPT_PIN and might accidentally zero
> another byte like PCI_MIN_GNT.
> 
> > +		}
> 

Oops. I had somehow deleted the opening brace when cleaning up the
patch.

A new version will be sent out.

Wei

> [Severity: Low]
> Could this extraneous closing brace cause a compilation failure?
> 
> It doesn't appear to match any opening brace in the added block, which
> would break the block structure and lead to a syntax error.
> 
> >  	} else {
> >  		dev_err(dev, "Attempt to read beyond a function's config space.\n");
> >  	}
> 
> -- 
> Sashiko AI review · https://sashiko.dev/#/patchset/20260913221039.2218950-1-wei.liu@kernel.org?part=1

  reply	other threads:[~2026-09-13 22:51 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-09-13 22:10 [PATCH] PCI: hv: hardwire PCI_INTERRUPT_PIN to 0 wei.liu
2026-09-13 22:19 ` sashiko-bot
2026-09-13 22:51   ` Wei Liu [this message]
2026-09-13 22:52 ` Wei Liu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260913225157.GG2219269@liuwe-devbox-debian-v2.local \
    --to=wei.liu@kernel.org \
    --cc=linux-hyperv@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=sashiko-reviews@lists.linux.dev \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox