Re: [PATCH] PCI: hv: hardwire PCI_INTERRUPT_PIN to 0

[Wei Liu <wei.liu@kernel.org>]

On Sun, Sep 13, 2026 at 03:10:39PM -0700, wei.liu@kernel.org wrote:
> From: Mukesh R <mrathor@linux.microsoft.com>
> 
> Hyper-V Discrete Device Assignment (DDA) does not support legacy (INTX)
> interrupts. When PCI_INTERRUPT_PIN is read, the pci-hyperv controller,
> which captures configuration space accesses, returns 0 to the caller.
> 
> However, the current code only captures 8bit read access, thus 16bit/32bit
> are missed, forwarded to the host/HW, and may yield a non zero value.
> 
> This fix addresses this issue, and makes sure that PCI_INTERRUPT_PIN is
> hardwired to 0, while the other bytes, are those returned by the host/HW.
> 
> Signed-off-by: Asher Kariv <askariv@microsoft.com>
> Signed-off-by: Mukesh R <mrathor@linux.microsoft.com>
> Signed-off-by: Wei Liu <wei.liu@kernel.org>
> ---
>  drivers/pci/controller/pci-hyperv.c | 10 ++++++++++
>  1 file changed, 10 insertions(+)
> 
> diff --git a/drivers/pci/controller/pci-hyperv.c b/drivers/pci/controller/pci-hyperv.c
> index 89816a2bd7cd..e6db82413add 100644
> --- a/drivers/pci/controller/pci-hyperv.c
> +++ b/drivers/pci/controller/pci-hyperv.c
> @@ -1240,6 +1240,16 @@ static void _hv_pcifront_read_config(struct hv_pci_dev *hpdev, int where,
>  			mb();
>  		}
>  		spin_unlock_irqrestore(&hbus->config_lock, flags);
> +
> +		/*
> +		 * Make sure PCI_INTERRUPT_PIN is hard-wired to 0, since it
> +		 * may be read using a 32bit read, which is skipped by the
> +		 * above emulation.
> +		 */
> +		if (where <= PCI_INTERRUPT_PIN &&
> +		    PCI_INTERRUPT_PIN < (where + size))
> +			*((char *)val + PCI_INTERRUPT_PIN - where) = 0;
> +		}

Please ignore this version. A new version will be sent out to add back the
opening brace.

Wei

>  	} else {
>  		dev_err(dev, "Attempt to read beyond a function's config space.\n");
>  	}
> -- 
> 2.53.0
>