From: Shubhrajyoti D <shubhrajyoti@ti.com>
To: linux-omap@vger.kernel.org
Cc: linux-i2c@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
ben-linux@fluff.org, tony@atomide.com, w.sang@pengutronix.de,
Shubhrajyoti D <shubhrajyoti@ti.com>,
Jon Hunter <jon-hunter@ti.com>
Subject: [PATCHv6 18/19] I2C: OMAP: Rename the 1p153 to the erratum id i462
Date: Tue, 10 Apr 2012 16:26:36 +0530 [thread overview]
Message-ID: <1334055397-899-19-git-send-email-shubhrajyoti@ti.com> (raw)
In-Reply-To: <1334055397-899-1-git-send-email-shubhrajyoti@ti.com>
The section number in the recent errata document has changed.
Rename the erratum 1p153 to the unique id i462 instead, so that
it is easier to reference. Also change the function name and comments
to reflect the same.
Cc: Jon Hunter <jon-hunter@ti.com>
Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com>
---
drivers/i2c/busses/i2c-omap.c | 12 ++++++------
1 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index a3160d1..7b24b44 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -170,7 +170,7 @@ enum {
/* Errata definitions */
#define I2C_OMAP_ERRATA_I207 (1 << 0)
-#define I2C_OMAP3_1P153 (1 << 1)
+#define I2C_OMAP_ERRATA_I462 (1 << 1)
struct omap_i2c_dev {
struct device *dev;
@@ -751,11 +751,11 @@ omap_i2c_omap1_isr(int this_irq, void *dev_id)
#endif
/*
- * OMAP3430 Errata 1.153: When an XRDY/XDR is hit, wait for XUDF before writing
+ * OMAP3430 Errata i462: When an XRDY/XDR is hit, wait for XUDF before writing
* data to DATA_REG. Otherwise some data bytes can be lost while transferring
* them from the memory to the I2C interface.
*/
-static int errata_omap3_1p153(struct omap_i2c_dev *dev, u16 *stat, int *err)
+static int errata_omap3_i462(struct omap_i2c_dev *dev, u16 *stat, int *err)
{
unsigned long timeout = 10000;
@@ -918,8 +918,8 @@ complete:
break;
}
- if ((dev->errata & I2C_OMAP3_1P153) &&
- errata_omap3_1p153(dev, &stat, &err))
+ if ((dev->errata & I2C_OMAP_ERRATA_I462) &&
+ errata_omap3_i462(dev, &stat, &err))
goto complete;
omap_i2c_write_reg(dev, OMAP_I2C_DATA_REG, w);
@@ -1057,7 +1057,7 @@ omap_i2c_probe(struct platform_device *pdev)
dev->errata |= I2C_OMAP_ERRATA_I207;
if (dev->rev <= OMAP_I2C_REV_ON_3430_3530)
- dev->errata |= I2C_OMAP3_1P153;
+ dev->errata |= I2C_OMAP_ERRATA_I462;
if (!(dev->flags & OMAP_I2C_FLAG_NO_FIFO)) {
u16 s;
--
1.7.4.1
prev parent reply other threads:[~2012-04-10 10:56 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-04-10 10:56 [PATCH 00/19] I2C updates Shubhrajyoti D
2012-04-10 10:56 ` [PATCHv6 02/19] I2C: OMAP: Remove reset at init Shubhrajyoti D
2012-04-10 10:56 ` [PATCHv6 03/19] I2C: OMAP: Recover from Bus Busy condition Shubhrajyoti D
2012-04-10 10:56 ` [PATCHv6 05/19] I2C: OMAP: Fix the interrupt clearing in OMAP4 Shubhrajyoti D
2012-04-10 10:56 ` [PATCHv6 06/19] I2C: OMAP: Fix the mismatch of pm_runtime enable and disable Shubhrajyoti D
2012-04-10 10:56 ` [PATCHv6 09/19] I2C: OMAP: Correct I2C revision for OMAP3 Shubhrajyoti D
2012-04-10 10:56 ` [PATCHv6 10/19] I2C: OMAP: Don't check if wait_for_completion_timeout() returns less than zero Shubhrajyoti D
2012-04-10 10:56 ` [PATCHv6 12/19] I2C: OMAP: Fix the crash in i2c remove Shubhrajyoti D
2012-04-10 10:56 ` [PATCHv6 13/19] I2C: OMAP: Handle error check for pm runtime Shubhrajyoti D
[not found] ` <1334055397-899-1-git-send-email-shubhrajyoti-l0cyMroinI0@public.gmane.org>
2012-04-10 10:56 ` [PATCHv6 01/19] I2C: OMAP: make omap_i2c_unidle/idle functions depend on CONFIG_PM_RUNTIME Shubhrajyoti D
2012-04-10 10:56 ` [PATCHv6 04/19] I2C: OMAP: I2C register restore only if context is lost Shubhrajyoti D
2012-04-10 10:56 ` [PATCHv6 07/19] I2C: OMAP: Optimise the remove code Shubhrajyoti D
2012-04-10 10:56 ` [PATCHv6 08/19] I2C: OMAP: Fix the error handling Shubhrajyoti D
2012-04-10 10:56 ` [PATCHv6 11/19] I2C: OMAP: use devm_* functions Shubhrajyoti D
2012-04-10 10:56 ` [PATCHv6 14/19] I2C: OMAP: Use SET_RUNTIME_PM_OPS Shubhrajyoti D
2012-04-10 10:56 ` [PATCHv6 15/19] I2C: OMAP: make the read ready processing a separate function Shubhrajyoti D
2012-04-10 10:56 ` [PATCHv6 16/19] I2C: OMAP: fix missing handling of errata I2C_OMAP3_1P153 Shubhrajyoti D
2012-04-10 10:56 ` [PATCHv6 19/19] ARM: OMAP4: hwmod data: I2C: add flag for context restore Shubhrajyoti D
2012-04-10 18:13 ` Paul Walmsley
[not found] ` <alpine.DEB.2.00.1204101212530.20894-rwI8Ez+7Ko+d5PgPZx9QOdBPR1lH4CV8@public.gmane.org>
2012-04-11 5:40 ` Shubhrajyoti
2012-04-10 11:31 ` [PATCH 00/19] I2C updates S, Venkatraman
2012-04-10 11:41 ` Felipe Balbi
[not found] ` <20120410114153.GR20616-S8G//mZuvNWo5Im9Ml3/Zg@public.gmane.org>
2012-04-10 14:56 ` Shubhrajyoti
2012-04-10 10:56 ` [PATCHv6 17/19] I2C: OMAP: Do not set the XUDF if the underflow is not reached Shubhrajyoti D
2012-04-10 10:56 ` Shubhrajyoti D [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1334055397-899-19-git-send-email-shubhrajyoti@ti.com \
--to=shubhrajyoti@ti.com \
--cc=ben-linux@fluff.org \
--cc=jon-hunter@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=tony@atomide.com \
--cc=w.sang@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox