public inbox for linux-i2c@vger.kernel.org
 help / color / mirror / Atom feed
From: Shubhrajyoti D <shubhrajyoti@ti.com>
To: linux-omap@vger.kernel.org
Cc: linux-i2c@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	ben-linux@fluff.org, tony@atomide.com, w.sang@pengutronix.de,
	Shubhrajyoti D <shubhrajyoti@ti.com>
Subject: [PATCHv6 02/19] I2C: OMAP: Remove reset at init
Date: Tue, 10 Apr 2012 16:26:20 +0530	[thread overview]
Message-ID: <1334055397-899-3-git-send-email-shubhrajyoti@ti.com> (raw)
In-Reply-To: <1334055397-899-1-git-send-email-shubhrajyoti@ti.com>

The reset in the driver at init is not needed anymore as the
following patch has removed the HWMOD_INIT_NO_RESET flag.
6d3c55f [OMAP: hwmod: fix the i2c-reset timeout during bootup]

This patch does the following
-removes the reset from the probe and implements a omap_i2c_reset
 function to reset.
- Reset is removed from omap_i2c_init, which was called
 not only during probe, but also after time out and error handling.
 omap_i2c_reset is added in those places to effect the reset.

Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com>
---
 drivers/i2c/busses/i2c-omap.c |   20 +++++++++++++-------
 1 files changed, 13 insertions(+), 7 deletions(-)

diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index 4f4188d..e402ebb 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -269,15 +269,9 @@ static inline u16 omap_i2c_read_reg(struct omap_i2c_dev *i2c_dev, int reg)
 				(i2c_dev->regs[reg] << i2c_dev->reg_shift));
 }
 
-static int omap_i2c_init(struct omap_i2c_dev *dev)
+static int omap_i2c_reset(struct omap_i2c_dev *dev)
 {
-	u16 psc = 0, scll = 0, sclh = 0, buf = 0;
-	u16 fsscll = 0, fssclh = 0, hsscll = 0, hssclh = 0;
-	unsigned long fclk_rate = 12000000;
 	unsigned long timeout;
-	unsigned long internal_clk = 0;
-	struct clk *fclk;
-
 	if (dev->rev >= OMAP_I2C_OMAP1_REV_2) {
 		/* Disable I2C controller before soft reset */
 		omap_i2c_write_reg(dev, OMAP_I2C_CON_REG,
@@ -325,6 +319,16 @@ static int omap_i2c_init(struct omap_i2c_dev *dev)
 							dev->westate);
 		}
 	}
+}
+
+static int omap_i2c_init(struct omap_i2c_dev *dev)
+{
+	u16 psc = 0, scll = 0, sclh = 0, buf = 0;
+	u16 fsscll = 0, fssclh = 0, hsscll = 0, hssclh = 0;
+	unsigned long fclk_rate = 12000000;
+	unsigned long internal_clk = 0;
+	struct clk *fclk;
+
 	omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0);
 
 	if (dev->flags & OMAP_I2C_FLAG_ALWAYS_ARMXOR_CLK) {
@@ -548,6 +552,7 @@ static int omap_i2c_xfer_msg(struct i2c_adapter *adap,
 		return r;
 	if (r == 0) {
 		dev_err(dev->dev, "controller timed out\n");
+		omap_i2c_reset(dev);
 		omap_i2c_init(dev);
 		return -ETIMEDOUT;
 	}
@@ -558,6 +563,7 @@ static int omap_i2c_xfer_msg(struct i2c_adapter *adap,
 	/* We have an error */
 	if (dev->cmd_err & (OMAP_I2C_STAT_AL | OMAP_I2C_STAT_ROVR |
 			    OMAP_I2C_STAT_XUDF)) {
+		omap_i2c_reset(dev);
 		omap_i2c_init(dev);
 		return -EIO;
 	}
-- 
1.7.4.1


  reply	other threads:[~2012-04-10 10:56 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-04-10 10:56 [PATCH 00/19] I2C updates Shubhrajyoti D
2012-04-10 10:56 ` Shubhrajyoti D [this message]
2012-04-10 10:56 ` [PATCHv6 03/19] I2C: OMAP: Recover from Bus Busy condition Shubhrajyoti D
2012-04-10 10:56 ` [PATCHv6 05/19] I2C: OMAP: Fix the interrupt clearing in OMAP4 Shubhrajyoti D
2012-04-10 10:56 ` [PATCHv6 06/19] I2C: OMAP: Fix the mismatch of pm_runtime enable and disable Shubhrajyoti D
2012-04-10 10:56 ` [PATCHv6 09/19] I2C: OMAP: Correct I2C revision for OMAP3 Shubhrajyoti D
2012-04-10 10:56 ` [PATCHv6 10/19] I2C: OMAP: Don't check if wait_for_completion_timeout() returns less than zero Shubhrajyoti D
2012-04-10 10:56 ` [PATCHv6 12/19] I2C: OMAP: Fix the crash in i2c remove Shubhrajyoti D
2012-04-10 10:56 ` [PATCHv6 13/19] I2C: OMAP: Handle error check for pm runtime Shubhrajyoti D
     [not found] ` <1334055397-899-1-git-send-email-shubhrajyoti-l0cyMroinI0@public.gmane.org>
2012-04-10 10:56   ` [PATCHv6 01/19] I2C: OMAP: make omap_i2c_unidle/idle functions depend on CONFIG_PM_RUNTIME Shubhrajyoti D
2012-04-10 10:56   ` [PATCHv6 04/19] I2C: OMAP: I2C register restore only if context is lost Shubhrajyoti D
2012-04-10 10:56   ` [PATCHv6 07/19] I2C: OMAP: Optimise the remove code Shubhrajyoti D
2012-04-10 10:56   ` [PATCHv6 08/19] I2C: OMAP: Fix the error handling Shubhrajyoti D
2012-04-10 10:56   ` [PATCHv6 11/19] I2C: OMAP: use devm_* functions Shubhrajyoti D
2012-04-10 10:56   ` [PATCHv6 14/19] I2C: OMAP: Use SET_RUNTIME_PM_OPS Shubhrajyoti D
2012-04-10 10:56   ` [PATCHv6 15/19] I2C: OMAP: make the read ready processing a separate function Shubhrajyoti D
2012-04-10 10:56   ` [PATCHv6 16/19] I2C: OMAP: fix missing handling of errata I2C_OMAP3_1P153 Shubhrajyoti D
2012-04-10 10:56   ` [PATCHv6 19/19] ARM: OMAP4: hwmod data: I2C: add flag for context restore Shubhrajyoti D
2012-04-10 18:13     ` Paul Walmsley
     [not found]       ` <alpine.DEB.2.00.1204101212530.20894-rwI8Ez+7Ko+d5PgPZx9QOdBPR1lH4CV8@public.gmane.org>
2012-04-11  5:40         ` Shubhrajyoti
2012-04-10 11:31   ` [PATCH 00/19] I2C updates S, Venkatraman
2012-04-10 11:41     ` Felipe Balbi
     [not found]       ` <20120410114153.GR20616-S8G//mZuvNWo5Im9Ml3/Zg@public.gmane.org>
2012-04-10 14:56         ` Shubhrajyoti
2012-04-10 10:56 ` [PATCHv6 17/19] I2C: OMAP: Do not set the XUDF if the underflow is not reached Shubhrajyoti D
2012-04-10 10:56 ` [PATCHv6 18/19] I2C: OMAP: Rename the 1p153 to the erratum id i462 Shubhrajyoti D

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1334055397-899-3-git-send-email-shubhrajyoti@ti.com \
    --to=shubhrajyoti@ti.com \
    --cc=ben-linux@fluff.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-i2c@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=tony@atomide.com \
    --cc=w.sang@pengutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox