[PATCH] i2c: Enable i2c-s3c2410 for S5P cpus

[PATCH] i2c: Enable i2c-s3c2410 for S5P cpus

[Joonyoung Shim]

This i2c controller driver can be used on the S5P series processors too,
so enable the driver in Konfig for those platforms.

Signed-off-by: Joonyoung Shim <jy0922.shim-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
Signed-off-by: Kyungmin Park <kyungmin.park-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
---
 drivers/i2c/busses/Kconfig |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 87ab056..4765d62 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -503,7 +503,7 @@ config I2C_PXA_SLAVE
 
 config I2C_S3C2410
 	tristate "S3C2410 I2C Driver"
-	depends on ARCH_S3C2410 || ARCH_S3C64XX
+	depends on ARCH_S3C2410 || ARCH_S3C64XX || PLAT_S5P
 	help
 	  Say Y here to include support for I2C controller in the
 	  Samsung S3C2410 based System-on-Chip devices.
-- 
1.7.0.4

Re: [PATCH] i2c: Enable i2c-s3c2410 for S5P cpus

[Ben Dooks]

On Thu, Jun 03, 2010 at 02:57:03PM +0900, Joonyoung Shim wrote:
> This i2c controller driver can be used on the S5P series processors too,
> so enable the driver in Konfig for those platforms.
> 
> Signed-off-by: Joonyoung Shim <jy0922.shim-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
> Signed-off-by: Kyungmin Park <kyungmin.park-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
> ---
>  drivers/i2c/busses/Kconfig |    2 +-
>  1 files changed, 1 insertions(+), 1 deletions(-)
> 
> diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
> index 87ab056..4765d62 100644
> --- a/drivers/i2c/busses/Kconfig
> +++ b/drivers/i2c/busses/Kconfig
> @@ -503,7 +503,7 @@ config I2C_PXA_SLAVE
>  
>  config I2C_S3C2410
>  	tristate "S3C2410 I2C Driver"
> -	depends on ARCH_S3C2410 || ARCH_S3C64XX
> +	depends on ARCH_S3C2410 || ARCH_S3C64XX || PLAT_S5P

It may be worth changing this to PLAT_S3C24XX || ARCH_S3C64XX || PLAT_S5P
or maybe we should just enable it if PLAT_SAMSUNG

It would be good to get an policy sorted out on these core drivers which
exists across many parts of S3C/S5P supported systems.

-- 
Ben

Q:      What's a light-year?
A:      One-third less calories than a regular year.

Re: [PATCH] i2c: Enable i2c-s3c2410 for S5P cpus

[Joonyoung Shim]

On 6/3/2010 5:46 PM, Ben Dooks wrote:
> On Thu, Jun 03, 2010 at 02:57:03PM +0900, Joonyoung Shim wrote:
>> This i2c controller driver can be used on the S5P series processors too,
>> so enable the driver in Konfig for those platforms.
>>
>> Signed-off-by: Joonyoung Shim <jy0922.shim-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
>> Signed-off-by: Kyungmin Park <kyungmin.park-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
>> ---
>>  drivers/i2c/busses/Kconfig |    2 +-
>>  1 files changed, 1 insertions(+), 1 deletions(-)
>>
>> diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
>> index 87ab056..4765d62 100644
>> --- a/drivers/i2c/busses/Kconfig
>> +++ b/drivers/i2c/busses/Kconfig
>> @@ -503,7 +503,7 @@ config I2C_PXA_SLAVE
>>  
>>  config I2C_S3C2410
>>  	tristate "S3C2410 I2C Driver"
>> -	depends on ARCH_S3C2410 || ARCH_S3C64XX
>> +	depends on ARCH_S3C2410 || ARCH_S3C64XX || PLAT_S5P
> 
> It may be worth changing this to PLAT_S3C24XX || ARCH_S3C64XX || PLAT_S5P
> or maybe we should just enable it if PLAT_SAMSUNG
> 

I think PLAT_SAMSUNG is more appropriate thing if it is no problem.

> It would be good to get an policy sorted out on these core drivers which
> exists across many parts of S3C/S5P supported systems.
>