public inbox for linux-i2c@vger.kernel.org
 help / color / mirror / Atom feed
From: Kartik Rajput <kkartik@nvidia.com>
To: <akhilrajeev@nvidia.com>, <andi.shyti@kernel.org>,
	<robh@kernel.org>, <krzk+dt@kernel.org>, <conor+dt@kernel.org>,
	<thierry.reding@gmail.com>, <jonathanh@nvidia.com>,
	<ldewangan@nvidia.com>, <digetx@gmail.com>,
	<linux-i2c@vger.kernel.org>, <devicetree@vger.kernel.org>,
	<linux-tegra@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Subject: [PATCH 1/5] i2c: tegra: Add HS mode support
Date: Wed, 8 Jan 2025 16:36:16 +0530	[thread overview]
Message-ID: <20250108110620.86900-2-kkartik@nvidia.com> (raw)
In-Reply-To: <20250108110620.86900-1-kkartik@nvidia.com>

From: Akhil R <akhilrajeev@nvidia.com>

Add support for HS (High Speed) mode tranfers, which is supported by
Tegra194 onwards.

Signed-off-by: Akhil R <akhilrajeev@nvidia.com>
Signed-off-by: Kartik Rajput <kkartik@nvidia.com>
---
 drivers/i2c/busses/i2c-tegra.c | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
index 87976e99e6d0..7b97c6d347ee 100644
--- a/drivers/i2c/busses/i2c-tegra.c
+++ b/drivers/i2c/busses/i2c-tegra.c
@@ -91,6 +91,7 @@
 #define I2C_HEADER_IE_ENABLE			BIT(17)
 #define I2C_HEADER_REPEAT_START			BIT(16)
 #define I2C_HEADER_CONTINUE_XFER		BIT(15)
+#define I2C_HEADER_HS_MODE			BIT(22)
 #define I2C_HEADER_SLAVE_ADDR_SHIFT		1
 
 #define I2C_BUS_CLEAR_CNFG			0x084
@@ -220,10 +221,13 @@ struct tegra_i2c_hw_feature {
 	u32 thigh_std_mode;
 	u32 tlow_fast_fastplus_mode;
 	u32 thigh_fast_fastplus_mode;
+	u32 tlow_hs_mode;
+	u32 thigh_hs_mode;
 	u32 setup_hold_time_std_mode;
 	u32 setup_hold_time_fast_fast_plus_mode;
 	u32 setup_hold_time_hs_mode;
 	bool has_interface_timing_reg;
+	bool has_hs_mode_support;
 };
 
 /**
@@ -681,6 +685,18 @@ static int tegra_i2c_init(struct tegra_i2c_dev *i2c_dev)
 	if (i2c_dev->hw->has_interface_timing_reg && tsu_thd)
 		i2c_writel(i2c_dev, tsu_thd, I2C_INTERFACE_TIMING_1);
 
+	/* Write HS mode registers. These will get used only for HS mode*/
+	if (i2c_dev->hw->has_hs_mode_support) {
+		tlow = i2c_dev->hw->tlow_hs_mode;
+		thigh = i2c_dev->hw->thigh_hs_mode;
+		tsu_thd = i2c_dev->hw->setup_hold_time_hs_mode;
+
+		val = FIELD_PREP(I2C_HS_INTERFACE_TIMING_THIGH, thigh) |
+			FIELD_PREP(I2C_HS_INTERFACE_TIMING_TLOW, tlow);
+		i2c_writel(i2c_dev, val, I2C_HS_INTERFACE_TIMING_0);
+		i2c_writel(i2c_dev, tsu_thd, I2C_HS_INTERFACE_TIMING_1);
+	}
+
 	clk_multiplier = (tlow + thigh + 2) * (non_hs_mode + 1);
 
 	err = clk_set_rate(i2c_dev->div_clk,
@@ -1178,6 +1194,9 @@ static void tegra_i2c_push_packet_header(struct tegra_i2c_dev *i2c_dev,
 	if (msg->flags & I2C_M_RD)
 		packet_header |= I2C_HEADER_READ;
 
+	if (i2c_dev->timings.bus_freq_hz > I2C_MAX_FAST_MODE_PLUS_FREQ)
+		packet_header |= I2C_HEADER_HS_MODE;
+
 	if (i2c_dev->dma_mode && !i2c_dev->msg_read)
 		*dma_buf++ = packet_header;
 	else
@@ -1618,10 +1637,13 @@ static const struct tegra_i2c_hw_feature tegra194_i2c_hw = {
 	.thigh_std_mode = 0x7,
 	.tlow_fast_fastplus_mode = 0x2,
 	.thigh_fast_fastplus_mode = 0x2,
+	.tlow_hs_mode = 0x8,
+	.thigh_hs_mode = 0x3,
 	.setup_hold_time_std_mode = 0x08080808,
 	.setup_hold_time_fast_fast_plus_mode = 0x02020202,
 	.setup_hold_time_hs_mode = 0x090909,
 	.has_interface_timing_reg = true,
+	.has_hs_mode_support = true,
 };
 
 static const struct of_device_id tegra_i2c_of_match[] = {
-- 
2.43.0


  reply	other threads:[~2025-01-08 11:06 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-01-08 11:06 [PATCH 0/5] Add I2C support for Tegra264 Kartik Rajput
2025-01-08 11:06 ` Kartik Rajput [this message]
2025-01-08 16:45   ` [PATCH 1/5] i2c: tegra: Add HS mode support Thierry Reding
2025-01-15 11:40     ` Kartik Rajput
2025-01-09 12:18   ` kernel test robot
2025-01-08 11:06 ` [PATCH 2/5] dt-bindings: i2c: nvidia,tegra20-i2c: Document Tegra264 I2C Kartik Rajput
2025-01-08 16:47   ` Thierry Reding
2025-01-15 11:41     ` Kartik Rajput
2025-01-10 15:55   ` Rob Herring
2025-01-15 11:46     ` Kartik Rajput
2025-01-08 11:06 ` [PATCH 3/5] i2c: tegra: Add Tegra264 support Kartik Rajput
2025-01-09  4:43   ` Mukesh Kumar Savaliya
2025-01-09 10:24     ` Thierry Reding
2025-01-09 12:37       ` Mukesh Kumar Savaliya
2025-01-08 11:06 ` [PATCH 4/5] i2c: tegra: Add support for SW Mutex register Kartik Rajput
2025-01-08 17:01   ` Thierry Reding
2025-01-15 11:39     ` Kartik Rajput
2025-01-08 11:06 ` [PATCH 5/5] i2c: tegra: Do not configure DMA if not supported Kartik Rajput
2025-01-09 10:33   ` Thierry Reding
2025-01-15 11:42     ` Kartik Rajput
2025-01-09 10:37 ` [PATCH 0/5] Add I2C support for Tegra264 Thierry Reding
2025-01-15 11:44   ` Kartik Rajput

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250108110620.86900-2-kkartik@nvidia.com \
    --to=kkartik@nvidia.com \
    --cc=akhilrajeev@nvidia.com \
    --cc=andi.shyti@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=digetx@gmail.com \
    --cc=jonathanh@nvidia.com \
    --cc=krzk+dt@kernel.org \
    --cc=ldewangan@nvidia.com \
    --cc=linux-i2c@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-tegra@vger.kernel.org \
    --cc=robh@kernel.org \
    --cc=thierry.reding@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox